The OpenNET Project / Index page

[ новости /+++ | форум | wiki | теги | ]

форумы  помощь  поиск  регистрация  майллист  вход/выход  слежка  RSS
"boot: cannot determine first file name on device 'flash:'"
Вариант для распечатки  
Пред. тема | След. тема 
Форум Маршрутизаторы CISCO и др. оборудование. (Cisco Catalyst коммутаторы)
Изначальное сообщение [ Отслеживать ]

"boot: cannot determine first file name on device 'flash:'"  +/
Сообщение от 007x email on 07-Фев-11, 13:55 
Router#reloa
Proceed with reload? [confirm]

*Mar  1 00:32:35.651: %SYS-5-RELOAD: Reload requested  by console. Reload Reason: Reload Command.
*Mar  1 00:32:37.235: %IPRAN_REDUNDANCY-2-NO_H
System Bootstrap, Version 12.2(8r)MC3, RELEASE SOFTWARE (fc1)
TAC Support: http://www.cisco.com/tac
Copyright (c) 2002 by cisco Systems, Inc.
mwr1900 processor with 262144 Kbytes of main memory
Main memory is configured to 64 bit mode with parity disabled


Readonly ROMMON initialized
program load complete, entry point: 0x80008000, size: 0xd560
program load complete, entry point: 0x80008000, size: 0xd560

program load complete, entry point: 0x80008000, size: 0x2339c38
Self decompressing the image : ################################################################################################################################################################################################################ [OK]

Smart Init is enabled
smart init is sizing iomem
  ID            MEMORY_REQ                 TYPE
000511          0X005F3C00 MWR1941-DC-A Mainboard
                0X0010AE00 public buffer pools
                0X00211000 public particle pools
TOTAL:          0X0090FA00

If any of the above Memory Requirements are
"UNKNOWN", you may be using an unsupported
configuration or there is a software problem and
system operation may be compromised.
Rounded IOMEM up to: 10Mb.
Using 3 percent iomem. [10Mb/256Mb]

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.


*** GT64120 Timer 0 Interrupt ***
boot: cannot determine first file name on device "flash:"

System Bootstrap, Version 12.2(8r)MC3, RELEASE SOFTWARE (fc1)
TAC Support: http://www.cisco.com/tac
Copyright (c) 2002 by cisco Systems, Inc.
mwr1900 processor with 262144 Kbytes of main memory
Main memory is configured to 64 bit mode with parity disabled


Readonly ROMMON initialized
program load complete, entry point: 0x80008000, size: 0xd560
program load complete, entry point: 0x80008000, size: 0xd560

program load complete, entry point: 0x80008000, size: 0x2339c38
Self decompressing the image : ################################################################################################################################################################################################################ [OK]

Smart Init is enabled
smart init is sizing iomem
  ID            MEMORY_REQ                 TYPE
000511          0X005F3C00 MWR1941-DC-A Mainboard
                0X0010AE00 public buffer pools
                0X00211000 public particle pools
TOTAL:          0X0090FA00

If any of the above Memory Requirements are
"UNKNOWN", you may be using an unsupported
configuration or there is a software problem and
system operation may be compromised.
Rounded IOMEM up to: 10Mb.
Using 3 percent iomem. [10Mb/256Mb]

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.


%SYS-6-READ_BOOTFILE_SKIP: boot system slot0:mwr1941-iprank9-mz.124-16.MR.bin command is skipped

%SYS-6-BOOT_MESSAGES: Messages above this line are from the boot loader.

*** GT64120 Timer 0 Interrupt ***

program load complete, entry point: 0x80008000, size: 0x2339c38
Self decompressing the image : ################################################################################################################################################################################################################ [OK]

Smart Init is enabled
smart init is sizing iomem
  ID            MEMORY_REQ                 TYPE
000511          0X005F3C00 MWR1941-DC-A Mainboard
                0X0010AE00 public buffer pools
                0X00211000 public particle pools
TOTAL:          0X0090FA00

If any of the above Memory Requirements are
"UNKNOWN", you may be using an unsupported
configuration or there is a software problem and
system operation may be compromised.
Rounded IOMEM up to: 10Mb.
Using 3 percent iomem. [10Mb/256Mb]

              Restricted Rights Legend

Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

           cisco Systems, Inc.
           170 West Tasman Drive
           San Jose, California 95134-1706

Cisco IOS Software, 1900 Software (MWR1900-IPRANK9-M), Version 12.4(16)MR, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Wed 03-Oct-07 13:11 by prod_rel_team
Image text-base: 0x600088E8, data-base: 0x62AB25F0


This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

cisco mwr1941-dc-a (R7000) processor (revision 1.0) with 251904K/10240K bytes of memory.
Processor board ID FTX1015A1U5
R7000 CPU at 240MHz, Implementation 39, Rev 3.3, 256KB L2 Cache
2 FastEthernet interfaces
DRAM configuration is 64 bits wide with parity disabled.
55K bytes of non-volatile configuration memory.
126000K bytes of ATA Slot0 CompactFlash (Read/Write)

Press RETURN to get started!

почему загружается с третье попытки?
как исправить данную проблему?

Ответить | Правка | Cообщить модератору

Оглавление

Сообщения по теме [Сортировка по времени | RSS]


1. "boot: cannot determine first file name on device 'flash:'"  +/
Сообщение от aZL on 07-Фев-11, 14:18 
Покажите sh ver и sh run | i boot
Ответить | Правка | ^ к родителю #0 | Наверх | Cообщить модератору

2. "boot: cannot determine first file name on device 'flash:'"  +/
Сообщение от 007x email on 07-Фев-11, 15:43 
> Покажите sh ver и sh run | i boot

Cisco IOS Software, 1900 Software (MWR1900-IPRANK9-M), Version 12.4(16)MR, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Wed 03-Oct-07 13:11 by prod_rel_team

ROM: System Bootstrap, Version 12.2(8r)MC3, RELEASE SOFTWARE (fc1)

Router uptime is 1 hour, 13 minutes
System returned to ROM by power-on
Running default software


This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
          
If you require further assistance please contact us by sending email to
export@cisco.com.
          
cisco mwr1941-dc-a (R7000) processor (revision 1.0) with 251904K/10240K bytes of memory.
Processor board ID FTX1015A1U5
R7000 CPU at 240MHz, Implementation 39, Rev 3.3, 256KB L2 Cache
2 FastEthernet interfaces
DRAM configuration is 64 bits wide with parity disabled.
55K bytes of non-volatile configuration memory.
126000K bytes of ATA Slot0 CompactFlash (Read/Write)
          
Configuration register is 0x2102


Router#sh run | i boot
boot system flash
boot system flash mwr1941-iprank9-mz.124-16.MR.bin

Ответить | Правка | ^ к родителю #1 | Наверх | Cообщить модератору

3. "boot: cannot determine first file name on device 'flash:'"  +/
Сообщение от aZL on 07-Фев-11, 15:55 
Покажите sh flash:
там должен быть mwr1941-iprank9-mz.124-16.MR.bin
но, видимо, его там нет и рутер грузится с onboard ROM.
Решение: залить правильный mwr1941-iprank9-mz.124-16.MR.bin на flash:
Ответить | Правка | ^ к родителю #2 | Наверх | Cообщить модератору

4. "boot: cannot determine first file name on device 'flash:'"  +/
Сообщение от 007x email on 08-Фев-11, 07:34 
> Покажите sh flash:
> там должен быть mwr1941-iprank9-mz.124-16.MR.bin
> но, видимо, его там нет и рутер грузится с onboard ROM.
> Решение: залить правильный mwr1941-iprank9-mz.124-16.MR.bin на flash:

Router#sh flash:

Slot0 CompactFlash directory:
File  Length   Name/status
  1   36937124  mwr1941-iprank9-mz.124-16.MR.bin  
[36937188 bytes used, 92086808 available, 129023996 total]
126000K bytes of ATA Slot0 CompactFlash (Read/Write)

Ответить | Правка | ^ к родителю #3 | Наверх | Cообщить модератору

5. "boot: cannot determine first file name on device 'flash:'"  +/
Сообщение от aZL on 08-Фев-11, 09:07 
Всё верно. Ещё варианты:
1. Не совсем правильно boot system flash mwr1941-iprank9-mz.124-16.MR.bin
Правильно: boot system flash:mwr1941-iprank9-mz.124-16.MR.bin
2. MWR1841 может работать в режиме standalone и redundancy, в последнем случае они как-то хитро грузится, надо читать.

Ответить | Правка | ^ к родителю #4 | Наверх | Cообщить модератору

6. "boot: cannot determine first file name on device 'flash:'"  +/
Сообщение от 007x email on 08-Фев-11, 14:28 
> Всё верно. Ещё варианты:
> 1. Не совсем правильно boot system flash mwr1941-iprank9-mz.124-16.MR.bin
> Правильно: boot system flash:mwr1941-iprank9-mz.124-16.MR.bin
> 2. MWR1841 может работать в режиме standalone и redundancy, в последнем случае
> они как-то хитро грузится, надо читать.

так и сделал все равно загружается после третье попытки(((

Ответить | Правка | ^ к родителю #5 | Наверх | Cообщить модератору

7. "boot: cannot determine first file name on device 'flash:'"  +/
Сообщение от aZL on 08-Фев-11, 15:36 
> так и сделал все равно загружается после третье попытки(((

т.к. наблюдалось
%SYS-6-READ_BOOTFILE_SKIP: boot system slot0:mwr1941-iprank9-mz.124-16.MR.bin command is skipped
пробуем: (config)#no boot system slot0:mwr1941-iprank9-mz.124-16.MR.bin

Ещё покажите те устройства, на которых что-то есть по sh fi s, например: dir slot0: , dir flash:

Ответить | Правка | ^ к родителю #6 | Наверх | Cообщить модератору

8. "boot: cannot determine first file name on device 'flash:'"  +/
Сообщение от 007x email on 08-Фев-11, 18:55 
>> так и сделал все равно загружается после третье попытки(((
> т.к. наблюдалось
> %SYS-6-READ_BOOTFILE_SKIP: boot system slot0:mwr1941-iprank9-mz.124-16.MR.bin command
> is skipped
> пробуем: (config)#no boot system slot0:mwr1941-iprank9-mz.124-16.MR.bin
> Ещё покажите те устройства, на которых что-то есть по sh fi s,
> например: dir slot0: , dir flash:

Router#sh fi s
File Systems:

       Size(b)       Free(b)      Type  Flags  Prefixes
             -             -    opaque     rw   archive:
             -             -    opaque     rw   system:
             -             -    opaque     rw   tmpsys:
         57336         54227     nvram     rw   nvram:
             -             -   network     rw   snmp:
             -             -    opaque     rw   null:
             -             -   network     rw   tftp:
*    129023996      92086808     flash     rw   slot0: flash:
             -             -    opaque     wo   syslog:
             -             -   network     rw   rcp:
             -             -   network     rw   pram:
             -             -    opaque     rw   xmodem:
             -             -    opaque     rw   ymodem:
             -             -   network     rw   ftp:
             -             -   network     rw   http:
             -             -   network     rw   scp:
             -             -    opaque     ro   tar:
             -             -   network     rw   https:
             -             -    opaque     ro   cns:

Router#dir slot0:
Directory of slot0:/

    1  -rw-    36937124                    <no date>  mwr1941-iprank9-mz.124-16.MR.bin

129023996 bytes total (92086808 bytes free)

Router#dir flash:
Directory of slot0:/

    1  -rw-    36937124                    <no date>  mwr1941-iprank9-mz.124-16.MR.bin

129023996 bytes total (92086808 bytes free)

Ответить | Правка | ^ к родителю #7 | Наверх | Cообщить модератору

9. "boot: cannot determine first file name on device 'flash:'"  +/
Сообщение от aZL on 09-Фев-11, 08:13 
попробуйте
no boot system flash:mwr1941-iprank9-mz.124-16.MR.bin
boot system slot0:mwr1941-iprank9-mz.124-16.MR.bin
Ответить | Правка | ^ к родителю #8 | Наверх | Cообщить модератору

10. "boot: cannot determine first file name on device 'flash:'"  +/
Сообщение от 007x email on 09-Фев-11, 14:42 
> попробуйте
> no boot system flash:mwr1941-iprank9-mz.124-16.MR.bin
> boot system slot0:mwr1941-iprank9-mz.124-16.MR.bin

после system нету команды Slot0: хотя cisco проглотила команду но все равно загружается так же ...

Ответить | Правка | ^ к родителю #9 | Наверх | Cообщить модератору

11. "boot: cannot determine first file name on device 'flash:'"  +/
Сообщение от aZL on 09-Фев-11, 16:10 
> после system нету команды Slot0: хотя cisco проглотила команду но все равно
> загружается так же ...

boot: cannot determine first file name on device 'flash:
When you get the above error messages on the console output, it means the Flash is empty or the file system is corrupted. Copy a valid image on the Flash by following the procedures provided in this document.
Т.е. рекомендуют format flash: и заново залить ios.
И можно удалить все boot system из конфига

Ответить | Правка | ^ к родителю #10 | Наверх | Cообщить модератору

12. "boot: cannot determine first file name on device 'flash:'"  +/
Сообщение от 007x email on 16-Фев-11, 10:00 
>> после system нету команды Slot0: хотя cisco проглотила команду но все равно
>> загружается так же ...
> boot: cannot determine first file name on device 'flash:
> When you get the above error messages on the console output, it
> means the Flash is empty or the file system is corrupted.
> Copy a valid image on the Flash by following the procedures
> provided in this document.
> Т.е. рекомендуют format flash: и заново залить ios.
> И можно удалить все boot system из конфига

все сделал так же загружается после второй попытки.

вот еще такие ошибки выводит или это не ошибки я точно не знаю

*Mar  1 20:21:30.235: %IPRAN_REDUNDANCY-2-NO_HEALTH_INTF: No interface has been configured as the IPRAN Health Interface
*Mar  1 20:21:30.235: %IPRAN_REDUNDANCY-2-NO_REVERTIVE_INTF: No interface has been configured as the IPRAN Revertive Interface
*Mar  1 20:21:30.235: %IPRAN_REDUNDANCY-2-NO_BACKHAUL_INTF: No interface has been configured as the IPRAN Backhaul Interface
*Mar  1 20:22:00.235: %IPRAN_REDUNDANCY-2-NO_HEALTH_INTF: No interface has been configured as the IPRAN Health Interface
*Mar  1 20:22:00.235: %IPRAN_REDUNDANCY-2-NO_REVERTIVE_INTF: No interface has been configured as the IPRAN Revertive Interface
*Mar  1 20:22:00.235: %IPRAN_REDUNDANCY-2-NO_BACKHAUL_INTF: No interface has been configured as the IPRAN Backhaul Interface
*Mar  1 20:22:30.235: %IPRAN_REDUNDANCY-2-NO_HEALTH_INTF: No interface has been configured as the IPRAN Health Interface
*Mar  1 20:22:30.235: %IPRAN_REDUNDANCY-2-NO_REVERTIVE_INTF: No interface has been configured as the IPRAN Revertive Interface
*Mar  1 20:22:30.235: %IPRAN_REDUNDANCY-2-NO_BACKHAUL_INTF: No interface has been configured as the IPRAN Backhaul Interface
*Mar  1 20:23:00.235: %IPRAN_REDUNDANCY-2-NO_HEALTH_INTF: No interface has been configured as the IPRAN Health Interface
*Mar  1 20:23:00.235: %IPRAN_REDUNDANCY-2-NO_REVERTIVE_INTF: No interface has been configured as the IPRAN Revertive Interface
*Mar  1 20:23:00.235: %IPRAN_REDUNDANCY-2-NO_BACKHAUL_INTF: No interface has been configured as the IPRAN Backhaul Interface
*Mar  1 20:23:30.235: %IPRAN_REDUNDANCY-2-NO_HEALTH_INTF: No interface has been configured as the IPRAN Health Interface
*Mar  1 20:23:30.235: %IPRAN_REDUNDANCY-2-NO_REVERTIVE_INTF: No interface has been configured as the IPRAN Revertive Interface
*Mar  1 20:23:30.235: %IPRAN_REDUNDANCY-2-NO_BACKHAUL_INTF: No interface has been configured as the IPRAN Backhaul Interface
*Mar  1 20:24:00.235: %IPRAN_REDUNDANCY-2-NO_HEALTH_INTF: No interface has been configured as the IPRAN Health Interface
*Mar  1 20:24:00.235: %IPRAN_REDUNDANCY-2-NO_REVERTIVE_INTF: No interface has been configured as the IPRAN Revertive Interface
*Mar  1 20:24:00.235: %IPRAN_REDUNDANCY-2-NO_BACKHAUL_INTF: No interface has been configured as the IPRAN Backhaul Interface
*Mar  1 20:24:30.235: %IPRAN_REDUNDANCY-2-NO_HEALTH_INTF: No interface has been configured as the IPRAN Health Interface
*Mar  1 20:24:30.235: %IPRAN_REDUNDANCY-2-NO_REVERTIVE_INTF: No interface has been configured as the IPRAN Revertive Interface
*Mar  1 20:24:30.235: %IPRAN_REDUNDANCY-2-NO_BACKHAUL_INTF: No interface has been configured as the IPRAN Backhaul Interface

Ответить | Правка | ^ к родителю #11 | Наверх | Cообщить модератору

13. "boot: cannot determine first file name on device 'flash:'"  +/
Сообщение от Myxa (??) on 16-Фев-11, 13:59 
> вот еще такие ошибки выводит или это не ошибки я точно не знаю

Это не совсем ошибки. Скорее предупреждения IP-RAN (IP Radio Access Network) о том, что часть интерфейсов недоконфигурированы.

Ответить | Правка | ^ к родителю #12 | Наверх | Cообщить модератору

14. "boot: cannot determine first file name on device 'flash:'"  +/
Сообщение от 007x email on 16-Фев-11, 15:38 
>> вот еще такие ошибки выводит или это не ошибки я точно не знаю
> Это не совсем ошибки. Скорее предупреждения IP-RAN (IP Radio Access Network) о
> том, что часть интерфейсов недоконфигурированы.

всем спасибо решил проблему

Ответить | Правка | ^ к родителю #13 | Наверх | Cообщить модератору

15. "boot: cannot determine first file name on device 'flash:'"  +/
Сообщение от Myxa (??) on 16-Фев-11, 15:56 
> всем спасибо решил проблему

Дык, опишите в чём проблема-то была?

Ответить | Правка | ^ к родителю #14 | Наверх | Cообщить модератору

16. "boot: cannot determine first file name on device 'flash:'"  +/
Сообщение от 007x email on 17-Фев-11, 15:14 
>> всем спасибо решил проблему
> Дык, опишите в чём проблема-то была?

boot system flash slot:filename.bin

и это все


Ответить | Правка | ^ к родителю #15 | Наверх | Cообщить модератору

Архив | Удалить

Рекомендовать для помещения в FAQ | Индекс форумов | Темы | Пред. тема | След. тема




Спонсоры:
Inferno Solutions
Hosting by Hoster.ru
Хостинг:

Закладки на сайте
Проследить за страницей
Created 1996-2022 by Maxim Chirkov
Добавить, Поддержать, Вебмастеру