Есть материнская плата серверна старая с IPMI. него войтине могу
В биосе он не настраивается никак.
Я его вижу, настроил сеть из ipmitool.
А что делать дальше?
Браузером я на  него войти не могу.
При включении секунд 30 сканируются порты
$ nmap -v -A 192.168.115.10

Starting Nmap 7.60 ( https://nmap.org ) at 2018-02-28 01:45 MSK
NSE: Loaded 146 scripts for scanning.
NSE: Script Pre-scanning.
Initiating NSE at 01:45
Completed NSE at 01:45, 0.00s elapsed
Initiating NSE at 01:45
Completed NSE at 01:45, 0.00s elapsed
Initiating Ping Scan at 01:45
Scanning 192.168.115.10 [2 ports]
Completed Ping Scan at 01:45, 0.08s elapsed (1 total hosts)
Initiating Parallel DNS resolution of 1 host. at 01:45
Completed Parallel DNS resolution of 1 host. at 01:45, 0.02s elapsed
Initiating Connect Scan at 01:45
Scanning 192.168.115.10 [1000 ports]
Increasing send delay for 192.168.115.10 from 0 to 5 due to 33 out of 108 dropped probes since last increase.
Completed Connect Scan at 01:46, 46.91s elapsed (1000 total ports)
Initiating Service scan at 01:46
NSE: Script scanning 192.168.115.10.
Initiating NSE at 01:46
Completed NSE at 01:46, 0.00s elapsed
Initiating NSE at 01:46
Completed NSE at 01:46, 0.00s elapsed
Nmap scan report for 192.168.115.10
Host is up (0.17s latency).
Not shown: 992 closed ports
PORT     STATE    SERVICE        VERSION
366/tcp  filtered odmr
593/tcp  filtered http-rpc-epmap
1070/tcp filtered gmrupdateserv
2121/tcp filtered ccproxy-ftp
3476/tcp filtered nppmp
5001/tcp filtered commplex-link
7106/tcp filtered unknown
9000/tcp filtered cslistener

NSE: Script Post-scanning.
Initiating NSE at 01:46
Completed NSE at 01:46, 0.00s elapsed
Initiating NSE at 01:46
Completed NSE at 01:46, 0.00s elapsed
Read data files from: /usr/bin/../share/nmap
Service detection performed. Please report any incorrect results at https://nmap.org/submit/ .
Nmap done: 1 IP address (1 host up) scanned in 47.57 seconds

А потом доступен только пинг.
ipmiview его еще поиском находит.
Задал пароли пользователям.
Посмотрел скорость вентиляторов. Все через ipmitool. А что с ним дальше делать?
какой от него прок в такой версии?