The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 ТемаНаборКатегория 
 
 [Cписок руководств | Печать]

rshd (8)
  • >> rshd (8) ( FreeBSD man: Команды системного администрирования )
  • rshd (8) ( Linux man: Команды системного администрирования )

  • BSD mandoc
     

    NAME

    
    
    rshd
    
     - remote shell server
    
     
    

    SYNOPSIS

    [-aDLln ]  

    DESCRIPTION

    The utility is the server for the rcmd(3) routine and, consequently, for the rsh(1) utility. The server provides remote execution facilities with authentication based on privileged port numbers from trusted hosts.

    The utility listens for service requests at the port indicated in the ``cmd'' service specification; see services(5). When a service request is received the following protocol is initiated:

    1. The server checks the client's source port. If the port is not in the range 512-1023, the server aborts the connection.
    2. The server reads characters from the socket up to a NUL (`\0') byte. The resultant string is interpreted as an ASCII number, base 10.
    3. If the number received in step 2 is non-zero, it is interpreted as the port number of a secondary stream to be used for the stderr A second connection is then created to the specified port on the client's machine. The source port of this second connection is also in the range 512-1023.
    4. The server checks the client's source address and requests the corresponding host name (see gethostbyaddr(3), hosts(5) and named(8)). If the hostname cannot be determined or the hostname and address do not match after verification, the dot-notation representation of the host address is used.
    5. A null terminated user name of at most 16 characters is retrieved on the initial socket. This user name is interpreted as the user identity on the client 's machine.
    6. A null terminated user name of at most 16 characters is retrieved on the initial socket. This user name is interpreted as a user identity to use on the server 's machine.
    7. A null terminated command to be passed to a shell is retrieved on the initial socket. The length of the command is limited by the upper bound on the size of the system's argument list.
    8. The utility then validates the user using ruserok(3), which uses the file /etc/hosts.equiv and the .rhosts file found in the user's home directory. The -l option prevents ruserok(3) from doing any validation based on the user's .rhosts file, unless the user is the superuser.
    9. A NUL byte is returned on the initial socket and the command line is passed to the normal login shell of the user. The shell inherits the network connections established by .

    The options are as follows:

    -a
    This flag is ignored, and is present for compatability purposes.
    -D
    Sets the TCP_NODELAY socket option, which improves the performance of small back-to-back writes at the expense of additional network traffic.
    -L
    Causes all successful accesses to be logged to syslogd(8) as auth.info messages.
    -l
    Do not use the user's .rhosts file for authentication, unless the user is the superuser.
    -n
    Turn off transport level keepalive messages. This will prevent sessions from timing out if the client crashes or becomes unreachable.

     

    FILES

    /etc/hosts
    /etc/hosts.equiv
    /etc/login.conf
    $HOME /.rhosts

    /etc/pam.conf
    uses /etc/pam.conf entries with service name ``rsh'' Authentication modules requiring passwords (such as pam_unix are not supported.

     

    DIAGNOSTICS

    Except for the last one listed below, all diagnostic messages are returned on the initial socket, after which any network connections are closed. An error is indicated by a leading byte with a value of 1 (0 is returned in step 10 above upon successful completion of all the steps prior to the execution of the login shell).

    Locuser too long.
    The name of the user on the client's machine is longer than 16 characters.
    Ruser too long.
    The name of the user on the remote machine is longer than 16 characters.
    Command too long.
    The command line passed exceeds the size of the argument list (as configured into the system).
    Login incorrect.
    No password file entry for the user name existed or the authentication procedure described above failed.
    Remote directory.
    The chdir(2) function to the home directory failed.
    Logins not available right now.
    The rsh(1) utility was attempted outside the allowed hours defined in /etc/login.conf for the local user's login class.
    Can't make pipe.
    The pipe needed for the stderr was not created.
    Can't fork; try again.
    A fork(2) by the server failed.
    <shellname>: ...
    The user's login shell could not be started. This message is returned on the connection associated with the stderr and is not preceded by a flag byte.

     

    SEE ALSO

    rlogin(1), rsh(1), gethostbyaddr(3), rcmd(3), ruserok(3), auth.conf5, hosts(5), hosts.equiv5, login.conf5, services(5), named(8), rlogind(8), syslogd(8)  

    HISTORY

    IPv6 support was added by WIDE/KAME project.  

    BUGS

    The authentication procedure used here assumes the integrity of each client machine and the connecting medium. This is insecure, but is useful in an ``open'' environment.

    A facility to allow all data exchanges to be encrypted should be present.

    Post-PAM, Fx also needs the following patch applied besides properly configuring .rhosts

    --- etc/pam.d/rsh.orig  Wed Dec 17 14:36:20 2003
    +++ etc/pam.d/rsh       Wed Dec 17 14:30:43 2003
    @@ -9 +9 @@
    -auth   required        pam_rhosts.so   no_warn
    +auth   required        pam_rhosts.so   no_warn allow_root
    

    A more extensible protocol (such as Telnet) should be used.


     

    Index

    NAME
    SYNOPSIS
    DESCRIPTION
    FILES
    DIAGNOSTICS
    SEE ALSO
    HISTORY
    BUGS


    Поиск по тексту MAN-ов: 




    Партнёры:
    PostgresPro
    Inferno Solutions
    Hosting by Hoster.ru
    Хостинг:

    Закладки на сайте
    Проследить за страницей
    Created 1996-2024 by Maxim Chirkov
    Добавить, Поддержать, Вебмастеру