The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]



"Проблема с vlan-ами Сisco маршрутизатор и коммутатор Catalyst"
Версия для распечатки Пред. тема | След. тема
Форум Маршрутизаторы CISCO и др. оборудование.
Исходное сообщение [ Отслеживать ]

. "Проблема с vlan-ами Сisco маршрутизатор и коммутатор Catalyst" +/
Сообщение от Денисemail (??), 05-Май-13, 14:12 
>> Повторю еще раз вопрос!!!
>> Какие сетевые настройки на ноутбуке???
>> (можете первые цифры закрыть XX)
>> IP
>> Маска
>> Шлюз
> покажите так же состояние портов!!!!!!!!!
> show int gig 0/47 и 0/48

SW1#sh int f0/47
FastEthernet0/47 is down, line protocol is down (notconnect)
  Hardware is Fast Ethernet, address is 1ce6.c73a.dfaf (bia 1ce6.c73a.dfaf)
  Description: ISP Inet cable
  MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec,
     reliability 255/255, txload 1/255, rxload 1/255
  Encapsulation ARPA, loopback not set
  Keepalive set (10 sec)
  Auto-duplex, Auto-speed, media type is 10/100BaseTX
  input flow-control is off, output flow-control is unsupported
  ARP type: ARPA, ARP Timeout 04:00:00
  Last input 4d17h, output 00:04:42, output hang never
  Last clearing of "show interface" counters never
  Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
  Queueing strategy: fifo
  Output queue: 0/40 (size/max)
  5 minute input rate 0 bits/sec, 0 packets/sec
  5 minute output rate 0 bits/sec, 0 packets/sec
     9437 packets input, 1561018 bytes, 0 no buffer
     Received 3271 broadcasts (1527 multicasts)
     0 runts, 0 giants, 0 throttles
     0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
     0 watchdog, 1527 multicast, 0 pause input
     0 input packets with dribble condition detected
     11388 packets output, 5415028 bytes, 0 underruns
     0 output errors, 0 collisions, 1 interface resets
     0 babbles, 0 late collision, 0 deferred
     0 lost carrier, 0 no carrier, 0 PAUSE output
     0 output buffer failures, 0 output buffers swapped out

SW1#sh int f0/48
FastEthernet0/48 is up, line protocol is up (connected)
  Hardware is Fast Ethernet, address is 1ce6.c73a.dfb0 (bia 1ce6.c73a.dfb0)
  Description: c2821 gi0/1 Inet
  MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec,
     reliability 255/255, txload 1/255, rxload 1/255
  Encapsulation ARPA, loopback not set
  Keepalive set (10 sec)
  Full-duplex, 100Mb/s, media type is 10/100BaseTX
  input flow-control is off, output flow-control is unsupported
  ARP type: ARPA, ARP Timeout 04:00:00
  Last input never, output 00:00:03, output hang never
  Last clearing of "show interface" counters never
  Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
  Queueing strategy: fifo
  Output queue: 0/40 (size/max)
  5 minute input rate 0 bits/sec, 0 packets/sec
  5 minute output rate 0 bits/sec, 0 packets/sec
     155678 packets input, 15214978 bytes, 0 no buffer
     Received 141753 broadcasts (0 multicasts)
     0 runts, 0 giants, 0 throttles
     0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
     0 watchdog, 0 multicast, 0 pause input
     0 input packets with dribble condition detected
     180397 packets output, 14189991 bytes, 0 underruns
     0 output errors, 0 collisions, 1 interface resets
     0 babbles, 0 late collision, 0 deferred
     0 lost carrier, 0 no carrier, 0 PAUSE output
     0 output buffer failures, 0 output buffers swapped out

Ответить | Правка | Наверх | Cообщить модератору

Оглавление
Проблема с vlan-ами Сisco маршрутизатор и коммутатор Catalyst, Денис, 02-Май-13, 18:37  [смотреть все]
Форумы | Темы | Пред. тема | След. тема



Партнёры:
PostgresPro
Inferno Solutions
Hosting by Hoster.ru
Хостинг:

Закладки на сайте
Проследить за страницей
Created 1996-2024 by Maxim Chirkov
Добавить, Поддержать, Вебмастеру