Some specific assumptions about this sample network are:
Three workstations and a Server are connected with Ethernet cabling:
a FreeBSD Server ("Curly") with an NE-2000 adapter configured as 'ed0'
a Windows-95 workstation ("Larry") with Microsoft's "native" 32-bit TCP/IP drivers
a Windows for Workgroups workstation ("Moe") with Microsoft's 16-bit TCP/IP extensions
a Windows NT workstation ("Shemp") with Microsoft's "native" 32-bit TCP/IP drivers
The IP addresses on the Ethernet side of this sample LAN have been taken from a pool addresses proposed reserved by RFC 1918 for use on private LANs, so you are free to use these actual IP addresses on your own LAN if you want. IP addresses are assigned as follows:
|Curly||192.168.1.1||The FreeBSD box|
|Larry||192.168.1.2||The Win'95 box|
|Moe||192.168.1.3||The WfW box|
|Shemp||192.168.1.4||The Windows NT box|
This guide assumes that the modem on the FreeBSD box is connected to the first serial port ('/dev/cuaa0' or 'COM1:' in DOS-terms).
Finally, we'll also assume that your Internet Service Provider (ISP) automatically provides the IP addresses of both your PPP/FreeBSD side as well as the ISP's side. (i.e.: Dynamic IP Addresses on both ends of the link.) Specific details for configuring the Dial-Out side of PPP will be addressed in Section 2, "Configuring the FreeBSD System".
For questions about FreeBSD, e-mail
For questions about this documentation, e-mail <doc@FreeBSD.org>.
Закладки на сайте
Проследить за страницей
Created 1996-2021 by Maxim Chirkov
Добавить, Поддержать, Вебмастеру