Исходное сообщение
"Сброс пароля на HP Procurve 2524" Отправлено Merridius, 22-Мрт-11 21:13
You may want to consider a reset to factory defaults. as follows: Clear/Reset: Resetting to the Factory-Default Configuration To execute the factory default reset, perform these steps: 1. Using pointed objects, simultaneously press both the Reset and Clear buttons on the front of the switch. 2. Continue to press the Clear button while releasing the Reset button. 3. When the Self Test LED begins to flash, release the Clear button. The switch will then complete its self test and begin operating with the configuration restored to the factory default settings.

Ваше сообщение
Имя*:
EMail:	Для отправки новых сообщений в текущей нити на email укажите знак ! перед адресом, например, !user@host.ru (!! - не показывать email). Более тонкая настройка отправки ответов производится в профиле зарегистрированного участника форума.
Заголовок*:
Сообщение*:	> You may want to consider a reset to factory defaults. as follows: > Clear/Reset: Resetting to the Factory-Default Configuration > To execute the factory default reset, perform these steps: > 1. Using pointed objects, simultaneously press both the Reset and Clear buttons > on the front of the switch. > 2. Continue to press the Clear button while releasing the Reset button. > 3. When the Self Test LED begins to flash, release the Clear > button. > The switch will then complete its self test and begin operating with > the configuration restored to the factory default settings.
	Введите код, изображенный на картинке: