Исходное сообщение
"Прокинуть порт. Опять." Отправлено Ricos, 13-Ноя-09 00:07
Пока сделал так: тыц controller E1 0/1/0 channel-group 0 timeslots 1-2 description e1 ! interface FastEthernet0/0 description lan1 Link ip address 192.168.228.1 255.255.255.0 ip nat inside duplex half speed auto no mop enabled ! interface FastEthernet0/1 ip address 192.168.227.1 255.255.255.0 ip access-group fa01_in in ip access-group fa01_out out ip nat inside duplex full speed auto no mop enabled ! interface Serial0/0/0 ip address xxx.xxx.xxx.xxx 255.255.255.252 ip nat outside ! ip classless ip route 0.0.0.0 0.0.0.0 yyy.yyy.yyy.yyyy ! no ip http server ip nat pool _pool 192.168.228.0 192.168.228.255 netmask 255.255.255.0 ip nat inside source list 1 interface Serial0/0/0 overload ip nat inside source static udp 192.168.227.2 12300 xxx.xxx.xxx.xxx 12300 extendable ! ip access-list extended fa01_in deny   ip any any ip access-list extended fa01_out permit udp any host 192.168.227.2 eq 12300 ! access-list 1 permit 192.168.228.0 0.0.0.255 dialer-list 1 protocol ip permit ! control-plane ! тыц Завтра посмотрим заработает ли.