forum.opennet.ru

Составление сообщения

Исходное сообщение

"Подскажите, диску конец?"
Отправлено Пантелеев, 19-Сен-17 10:52

Не роняли, не пинали. Этот системник с райдом второго уровня включается раз в неделю, делает свои дела и выключается. Наработка то совсем маленькая.
Что могло случиться?

# smartctl -a /dev/sdb
smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.12.12-300.fc26.x86_64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Blue Mobile
Device Model:     WDC WD10JPVX-22JC3T0
Serial Number:    WD-WX61A4332013
LU WWN Device Id: 5 0014ee 658cda8a5
Firmware Version: 01.01A01
User Capacity:    1 000 204 886 016 bytes [1,00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2 (minor revision not indicated)
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Tue Sep 19 10:44:04 2017 MSK
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status:  (0x00)    Offline data collection activity
                    was never started.
                    Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)    The previous self-test routine completed
                    without error or no self-test has ever
                    been run.
Total time to complete Offline
data collection:         (16680) seconds.
Offline data collection
capabilities:              (0x7b) SMART execute Offline immediate.
                    Auto Offline data collection on/off support.
                    Suspend Offline collection upon new
                    command.
                    Offline surface scan supported.
                    Self-test supported.
                    Conveyance Self-test supported.
                    Selective Self-test supported.
SMART capabilities:            (0x0003)    Saves SMART data before entering
                    power-saving mode.
                    Supports SMART auto save timer.
Error logging capability:        (0x01)    Error logging supported.
                    General Purpose Logging supported.
Short self-test routine
recommended polling time:      (   2) minutes.
Extended self-test routine
recommended polling time:      ( 188) minutes.
Conveyance self-test routine
recommended polling time:      (   5) minutes.
SCT capabilities:            (0x7035)    SCT Status supported.
                    SCT Feature Control supported.
                    SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   184   184   051    Pre-fail  Always       -       100271
  3 Spin_Up_Time            0x0027   178   175   021    Pre-fail  Always       -       2058
  4 Start_Stop_Count        0x0032   091   091   000    Old_age   Always       -       9449
  5 Reallocated_Sector_Ct   0x0033   191   191   140    Pre-fail  Always       -       413
  7 Seek_Error_Rate         0x002e   200   200   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   097   097   000    Old_age   Always       -       2366
10 Spin_Retry_Count        0x0032   100   100   000    Old_age   Always       -       0
11 Calibration_Retry_Count 0x0032   100   100   000    Old_age   Always       -       0
12 Power_Cycle_Count       0x0032   099   099   000    Old_age   Always       -       1774
191 G-Sense_Error_Rate      0x0032   093   093   000    Old_age   Always       -       7
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       137
193 Load_Cycle_Count        0x0032   195   195   000    Old_age   Always       -       15930
194 Temperature_Celsius     0x0022   123   086   000    Old_age   Always       -       24
196 Reallocated_Event_Count 0x0032   162   162   000    Old_age   Always       -       38
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       58
198 Offline_Uncorrectable   0x0030   100   253   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0008   100   253   000    Old_age   Offline      -       0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Conveyance offline  Completed: read failure       90%      2362         2262201
# 2  Conveyance offline  Completed: read failure       90%      2362         2262201
# 3  Short offline       Completed: read failure       90%      2358         1026040
SMART Selective self-test log data structure revision number 1
SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
dmesg
2468.216597] sd 6:0:0:0: [sdb] Attached SCSI disk
[ 2472.346413] sd 6:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2472.346421] sd 6:0:0:0: [sdb] tag#0 Sense Key : Medium Error [current]
[ 2472.346426] sd 6:0:0:0: [sdb] tag#0 Add. Sense: Unrecovered read error
[ 2472.346433] sd 6:0:0:0: [sdb] tag#0 CDB: Read(10) 28 00 00 60 16 c5 00 00 08 00
[ 2472.346438] blk_update_request: critical medium error, dev sdb, sector 6297285
[ 2476.179034] sd 6:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2476.179043] sd 6:0:0:0: [sdb] tag#0 Sense Key : Medium Error [current]
[ 2476.179048] sd 6:0:0:0: [sdb] tag#0 Add. Sense: Unrecovered read error
[ 2476.179055] sd 6:0:0:0: [sdb] tag#0 CDB: Read(10) 28 00 00 60 17 88 00 00 08 00
[ 2476.179060] blk_update_request: critical medium error, dev sdb, sector 6297480
[ 2480.150645] sd 6:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2480.150654] sd 6:0:0:0: [sdb] tag#0 Sense Key : Medium Error [current]
[ 2480.150659] sd 6:0:0:0: [sdb] tag#0 Add. Sense: Unrecovered read error
[ 2480.150667] sd 6:0:0:0: [sdb] tag#0 CDB: Read(10) 28 00 00 60 16 c5 00 00 08 00
[ 2480.150672] blk_update_request: critical medium error, dev sdb, sector 6297285
[ 2480.150683] Buffer I/O error on dev sdb2, logical block 2104320, async page read
[ 2480.150692] Buffer I/O error on dev sdb2, logical block 2104321, async page read
[ 2480.150696] Buffer I/O error on dev sdb2, logical block 2104322, async page read
[ 2480.150700] Buffer I/O error on dev sdb2, logical block 2104323, async page read
[ 2480.150705] Buffer I/O error on dev sdb2, logical block 2104324, async page read
[ 2480.150709] Buffer I/O error on dev sdb2, logical block 2104325, async page read
[ 2480.150713] Buffer I/O error on dev sdb2, logical block 2104326, async page read
[ 2480.150717] Buffer I/O error on dev sdb2, logical block 2104327, async page read
[ 2483.737800] sd 6:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2483.737808] sd 6:0:0:0: [sdb] tag#0 Sense Key : Medium Error [current]
[ 2483.737812] sd 6:0:0:0: [sdb] tag#0 Add. Sense: Unrecovered read error
[ 2483.737819] sd 6:0:0:0: [sdb] tag#0 CDB: Read(10) 28 00 00 60 17 88 00 00 08 00
[ 2483.737825] blk_update_request: critical medium error, dev sdb, sector 6297480
[ 2483.737835] Buffer I/O error on dev sdb3, logical block 0, async page read
[ 2483.737843] Buffer I/O error on dev sdb3, logical block 1, async page read

Исходное сообщение
"Подскажите, диску конец?" Отправлено Пантелеев, 19-Сен-17 10:52
Не роняли, не пинали. Этот системник с райдом второго уровня включается раз в неделю, делает свои дела и выключается. Наработка то совсем маленькая. Что могло случиться? # smartctl -a /dev/sdb smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.12.12-300.fc26.x86_64] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Blue Mobile Device Model: WDC WD10JPVX-22JC3T0 Serial Number: WD-WX61A4332013 LU WWN Device Id: 5 0014ee 658cda8a5 Firmware Version: 01.01A01 User Capacity: 1 000 204 886 016 bytes [1,00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Tue Sep 19 10:44:04 2017 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (16680) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 188) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x7035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 184 184 051 Pre-fail Always - 100271 3 Spin_Up_Time 0x0027 178 175 021 Pre-fail Always - 2058 4 Start_Stop_Count 0x0032 091 091 000 Old_age Always - 9449 5 Reallocated_Sector_Ct 0x0033 191 191 140 Pre-fail Always - 413 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 9 Power_On_Hours 0x0032 097 097 000 Old_age Always - 2366 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1774 191 G-Sense_Error_Rate 0x0032 093 093 000 Old_age Always - 7 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 137 193 Load_Cycle_Count 0x0032 195 195 000 Old_age Always - 15930 194 Temperature_Celsius 0x0022 123 086 000 Old_age Always - 24 196 Reallocated_Event_Count 0x0032 162 162 000 Old_age Always - 38 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 58 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Conveyance offline Completed: read failure 90% 2362 2262201 # 2 Conveyance offline Completed: read failure 90% 2362 2262201 # 3 Short offline Completed: read failure 90% 2358 1026040 SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. dmesg 2468.216597] sd 6:0:0:0: [sdb] Attached SCSI disk [ 2472.346413] sd 6:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 2472.346421] sd 6:0:0:0: [sdb] tag#0 Sense Key : Medium Error [current] [ 2472.346426] sd 6:0:0:0: [sdb] tag#0 Add. Sense: Unrecovered read error [ 2472.346433] sd 6:0:0:0: [sdb] tag#0 CDB: Read(10) 28 00 00 60 16 c5 00 00 08 00 [ 2472.346438] blk_update_request: critical medium error, dev sdb, sector 6297285 [ 2476.179034] sd 6:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 2476.179043] sd 6:0:0:0: [sdb] tag#0 Sense Key : Medium Error [current] [ 2476.179048] sd 6:0:0:0: [sdb] tag#0 Add. Sense: Unrecovered read error [ 2476.179055] sd 6:0:0:0: [sdb] tag#0 CDB: Read(10) 28 00 00 60 17 88 00 00 08 00 [ 2476.179060] blk_update_request: critical medium error, dev sdb, sector 6297480 [ 2480.150645] sd 6:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 2480.150654] sd 6:0:0:0: [sdb] tag#0 Sense Key : Medium Error [current] [ 2480.150659] sd 6:0:0:0: [sdb] tag#0 Add. Sense: Unrecovered read error [ 2480.150667] sd 6:0:0:0: [sdb] tag#0 CDB: Read(10) 28 00 00 60 16 c5 00 00 08 00 [ 2480.150672] blk_update_request: critical medium error, dev sdb, sector 6297285 [ 2480.150683] Buffer I/O error on dev sdb2, logical block 2104320, async page read [ 2480.150692] Buffer I/O error on dev sdb2, logical block 2104321, async page read [ 2480.150696] Buffer I/O error on dev sdb2, logical block 2104322, async page read [ 2480.150700] Buffer I/O error on dev sdb2, logical block 2104323, async page read [ 2480.150705] Buffer I/O error on dev sdb2, logical block 2104324, async page read [ 2480.150709] Buffer I/O error on dev sdb2, logical block 2104325, async page read [ 2480.150713] Buffer I/O error on dev sdb2, logical block 2104326, async page read [ 2480.150717] Buffer I/O error on dev sdb2, logical block 2104327, async page read [ 2483.737800] sd 6:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 2483.737808] sd 6:0:0:0: [sdb] tag#0 Sense Key : Medium Error [current] [ 2483.737812] sd 6:0:0:0: [sdb] tag#0 Add. Sense: Unrecovered read error [ 2483.737819] sd 6:0:0:0: [sdb] tag#0 CDB: Read(10) 28 00 00 60 17 88 00 00 08 00 [ 2483.737825] blk_update_request: critical medium error, dev sdb, sector 6297480 [ 2483.737835] Buffer I/O error on dev sdb3, logical block 0, async page read [ 2483.737843] Buffer I/O error on dev sdb3, logical block 1, async page read

Ваше сообщение
Имя*:
EMail:	Для отправки новых сообщений в текущей нити на email укажите знак ! перед адресом, например, !user@host.ru (!! - не показывать email). Более тонкая настройка отправки ответов производится в профиле зарегистрированного участника форума.
Заголовок*:
Сообщение*:	> Не роняли, не пинали. Этот системник с райдом второго уровня включается раз > в неделю, делает свои дела и выключается. Наработка то совсем маленькая. > Что могло случиться? > # smartctl -a /dev/sdb > smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.12.12-300.fc26.x86_64] (local build) > Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org > === START OF INFORMATION SECTION === > Model Family: Western Digital Blue Mobile > Device Model: WDC WD10JPVX-22JC3T0 > Serial Number: WD-WX61A4332013 > LU WWN Device Id: 5 0014ee 658cda8a5 > Firmware Version: 01.01A01 > User Capacity: 1 000 204 886 016 bytes [1,00 TB] > Sector Sizes: 512 bytes logical, 4096 bytes physical > Rotation Rate: 5400 rpm > Device is: In smartctl database > [for details use: -P show] > ATA Version is: ACS-2 (minor revision not indicated) > SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) > Local Time is: Tue Sep 19 10:44:04 2017 MSK > SMART support is: Available - device has SMART capability. > SMART support is: Enabled > === START OF READ SMART DATA SECTION === > SMART overall-health self-assessment test result: PASSED > General SMART Values: > Offline data collection status: (0x00) Offline data collection activity > was never started. > Auto Offline Data Collection: Disabled. > Self-test execution status: ( 0) > The previous self-test routine completed > without error or no self-test has ever > been run. > Total time to complete Offline > data collection: (16680) seconds. > Offline data collection > capabilities: (0x7b) SMART execute Offline immediate. > Auto Offline data collection on/off support. > Suspend Offline collection upon new > command. > Offline surface scan supported. > Self-test supported. > Conveyance Self-test supported. > Selective Self-test supported. > SMART capabilities: > (0x0003) Saves SMART data before entering > power-saving mode. > Supports SMART auto save timer. > Error logging capability: (0x01) Error > logging supported. > General Purpose Logging supported. > Short self-test routine > recommended polling time: ( 2) minutes. > Extended self-test routine > recommended polling time: ( 188) minutes. > Conveyance self-test routine > recommended polling time: ( 5) minutes. > SCT capabilities: (0x7035) SCT > Status supported. > SCT Feature Control supported. > SCT Data Table supported. > SMART Attributes Data Structure revision number: 16 > Vendor Specific SMART Attributes with Thresholds: > ID# ATTRIBUTE_NAME FLAG > VALUE WORST THRESH TYPE > UPDATED WHEN_FAILED RAW_VALUE > 1 Raw_Read_Error_Rate 0x002f 184 > 184 051 Pre-fail > Always - > 100271 > 3 Spin_Up_Time > 0x0027 178 175 > 021 Pre-fail Always > - 2058 > 4 Start_Stop_Count 0x0032 > 091 091 000 > Old_age Always > - 9449 > 5 Reallocated_Sector_Ct 0x0033 191 > 191 140 Pre-fail Always > - > 413 > 7 Seek_Error_Rate > 0x002e 200 200 000 > Old_age Always > - 0 > 9 Power_On_Hours > 0x0032 097 097 000 > Old_age Always > - 2366 > 10 Spin_Retry_Count 0x0032 > 100 100 000 > Old_age Always - > 0 > 11 Calibration_Retry_Count 0x0032 100 100 > 000 Old_age Always > - 0 > 12 Power_Cycle_Count 0x0032 > 099 099 000 Old_age > Always - > 1774 > 191 G-Sense_Error_Rate 0x0032 093 > 093 000 Old_age > Always - > 7 > 192 Power-Off_Retract_Count 0x0032 200 200 000 > Old_age Always > - 137 > 193 Load_Cycle_Count 0x0032 > 195 195 000 Old_age > Always - > 15930 > 194 Temperature_Celsius 0x0022 123 > 086 000 Old_age Always > - > 24 > 196 Reallocated_Event_Count 0x0032 162 162 000 > Old_age Always > - 38 > 197 Current_Pending_Sector 0x0032 200 200 > 000 Old_age Always > - 58 > 198 Offline_Uncorrectable 0x0030 100 253 > 000 Old_age Offline > - 0 > 199 UDMA_CRC_Error_Count 0x0032 200 200 > 000 Old_age Always > - > 0 > 200 Multi_Zone_Error_Rate 0x0008 100 253 > 000 Old_age Offline > - 0 > SMART Error Log Version: 1 > No Errors Logged > SMART Self-test log structure revision number 1 > Num Test_Description Status > > Remaining LifeTime(hours) LBA_of_first_error > # 1 Conveyance offline Completed: read failure > 90% 2362 > 2262201 > # 2 Conveyance offline Completed: read failure > 90% 2362 > 2262201 > # 3 Short offline Completed: > read failure 90% > 2358 > 1026040 > SMART Selective self-test log data structure revision number 1 > SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS > 1 > 0 0 Not_testing > 2 > 0 0 Not_testing > 3 > 0 0 Not_testing > 4 > 0 0 Not_testing > 5 > 0 0 Not_testing > Selective self-test flags (0x0): > After scanning selected spans, do NOT read-scan remainder of disk. > If Selective self-test is pending on power-up, resume after 0 minute delay. > dmesg > 2468.216597] sd 6:0:0:0: [sdb] Attached SCSI disk > [ 2472.346413] sd 6:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE > [ 2472.346421] sd 6:0:0:0: [sdb] tag#0 Sense Key : Medium Error [current] > [ 2472.346426] sd 6:0:0:0: [sdb] tag#0 Add. Sense: Unrecovered read error > [ 2472.346433] sd 6:0:0:0: [sdb] tag#0 CDB: Read(10) 28 00 00 60 > 16 c5 00 00 08 00 > [ 2472.346438] blk_update_request: critical medium error, dev sdb, sector 6297285 > [ 2476.179034] sd 6:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE > [ 2476.179043] sd 6:0:0:0: [sdb] tag#0 Sense Key : Medium Error [current] > [ 2476.179048] sd 6:0:0:0: [sdb] tag#0 Add. Sense: Unrecovered read error > [ 2476.179055] sd 6:0:0:0: [sdb] tag#0 CDB: Read(10) 28 00 00 60 > 17 88 00 00 08 00 > [ 2476.179060] blk_update_request: critical medium error, dev sdb, sector 6297480 > [ 2480.150645] sd 6:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE > [ 2480.150654] sd 6:0:0:0: [sdb] tag#0 Sense Key : Medium Error [current] > [ 2480.150659] sd 6:0:0:0: [sdb] tag#0 Add. Sense: Unrecovered read error > [ 2480.150667] sd 6:0:0:0: [sdb] tag#0 CDB: Read(10) 28 00 00 60 > 16 c5 00 00 08 00 > [ 2480.150672] blk_update_request: critical medium error, dev sdb, sector 6297285 > [ 2480.150683] Buffer I/O error on dev sdb2, logical block 2104320, async > page read > [ 2480.150692] Buffer I/O error on dev sdb2, logical block 2104321, async > page read > [ 2480.150696] Buffer I/O error on dev sdb2, logical block 2104322, async > page read > [ 2480.150700] Buffer I/O error on dev sdb2, logical block 2104323, async > page read > [ 2480.150705] Buffer I/O error on dev sdb2, logical block 2104324, async > page read > [ 2480.150709] Buffer I/O error on dev sdb2, logical block 2104325, async > page read > [ 2480.150713] Buffer I/O error on dev sdb2, logical block 2104326, async > page read > [ 2480.150717] Buffer I/O error on dev sdb2, logical block 2104327, async > page read > [ 2483.737800] sd 6:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE > [ 2483.737808] sd 6:0:0:0: [sdb] tag#0 Sense Key : Medium Error [current] > [ 2483.737812] sd 6:0:0:0: [sdb] tag#0 Add. Sense: Unrecovered read error > [ 2483.737819] sd 6:0:0:0: [sdb] tag#0 CDB: Read(10) 28 00 00 60 > 17 88 00 00 08 00 > [ 2483.737825] blk_update_request: critical medium error, dev sdb, sector 6297480 > [ 2483.737835] Buffer I/O error on dev sdb3, logical block 0, async > page read > [ 2483.737843] Buffer I/O error on dev sdb3, logical block 1, async > page read
	Введите код, изображенный на картинке:

При общении не допускается: неуважительное отношение к собеседнику, хамство, унизительное обращение, ненормативная лексика, переход на личности, агрессивное поведение, обесценивание собеседника, провоцирование флейма голословными и заведомо ложными заявлениями. Не отвечайте на сообщения, явно нарушающие правила - удаляются не только сами нарушения, но и все ответы на них. Лог модерирования.

Партнёры:

Хостинг:

Закладки на сайте
Проследить за страницей

Created 1996-2024 by Maxim Chirkov
Добавить, Поддержать, Вебмастеру