- Dell inspiron 6400 + FreeBSD, universite, 02:16 , 15-Сен-07 (1)
- Dell inspiron 6400 + FreeBSD, scaroot, 11:34 , 17-Сен-07 (2)
>uname -a FreeBSD 6.2 release >dmesg Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 6.2-RELEASE #0: Fri Jan 12 11:05:30 UTC 2007 root@dessler.cse.buffalo.edu:/usr/obj/usr/src/sys/SMP ACPI APIC Table: <DELL M07 > Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Genuine Intel(R) CPU T2400 @ 1.83GHz (1828.76-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6e8 Stepping = 8 Features=0xbfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0xc1a9<SSE3,MON,VMX,EST,TM2,<b14>,<b15>> AMD Features=0x100000<NX> Cores per package: 2 real memory = 535638016 (510 MB) avail memory = 510296064 (486 MB) FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0: Changing APIC ID to 2 ioapic0 <Version 2.0> irqs 0-23 on motherboard kbd1 at kbdmux0 ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) acpi0: <DELL M07 > on motherboard Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_throttle0: <ACPI CPU Throttling> on cpu0 cpu1: <ACPI CPU> on acpi0 acpi_throttle1: <ACPI CPU Throttling> on cpu1 acpi_throttle1: failed to attach P_CNT device_attach: acpi_throttle1 attach returned 6 acpi_acad0: <AC Adapter> on acpi0 battery0: <ACPI Control Method Battery> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) pci0: <multimedia> at device 27.0 (no driver attached) pcib2: <ACPI PCI-PCI bridge> at device 28.0 on pci0 pci11: <ACPI PCI bus> on pcib2 pci11: <network> at device 0.0 (no driver attached) pcib3: <ACPI PCI-PCI bridge> at device 28.3 on pci0 pci12: <ACPI PCI bus> on pcib3 uhci0: <UHCI (generic) USB controller> port 0xbf80-0xbf9f irq 20 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] usb0: <UHCI (generic) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <UHCI (generic) USB controller> port 0xbf60-0xbf7f irq 21 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] usb1: <UHCI (generic) USB controller> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <UHCI (generic) USB controller> port 0xbf40-0xbf5f irq 22 at device 29.2 on pci0 uhci2: [GIANT-LOCKED] usb2: <UHCI (generic) USB controller> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3: <UHCI (generic) USB controller> port 0xbf20-0xbf3f irq 23 at device 29.3 on pci0 uhci3: [GIANT-LOCKED] usb3: <UHCI (generic) USB controller> on uhci3 usb3: USB revision 1.0 uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xffa80000-0xffa803ff irq 20 at device 29.7 on pci0 ehci0: [GIANT-LOCKED] usb4: EHCI version 1.0 usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0 usb4: USB revision 2.0 uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub4: 8 ports with 8 removable, self powered pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci3: <ACPI PCI bus> on pcib4 bfe0: <Broadcom BCM4401-B0 Fast Ethernet> mem 0xdf9fe000-0xdf9fffff irq 17 at device 0.0 on pci3 miibus0: <MII bus> on bfe0 bmtphy0: <BCM4401 10/100baseTX PHY> on miibus0 bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto bfe0: Ethernet address: 00:15:c5:aa:c9:df fwohci0: <1394 Open Host Controller Interface> mem 0xdf9fd800-0xdf9fdfff irq 19 at device 1.0 on pci3 fwohci0: OHCI version 1.10 (ROM=0) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 32:4f:c0:00:3c:bb:b0:50 fwohci0: Phy 1394a available S400, 1 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 32:4f:c0:bb:b0:50 fwe0: Ethernet address: 32:4f:c0:bb:b0:50 fwe0: if_start running deferred for Giant sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) pci3: <base peripheral> at device 1.1 (no driver attached) pci3: <base peripheral> at device 1.2 (no driver attached) pci3: <base peripheral> at device 1.3 (no driver attached) pci3: <base peripheral> at device 1.4 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH7M SATA300 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xbfa0-0xbfaf irq 17 at device 31.2 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 pci0: <serial bus, SMBus> at device 31.3 (no driver attached) acpi_tz0: <Thermal Zone> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64,0x62,0x66 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0 pmtimer0 on isa0 orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff on isa0 ppc0: parallel port not found. sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 or not responding sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/20.00, addr 2, iclass 3/1 ums0: 3 buttons and Z dir. Timecounters tick every 1.000 msec ad0: 76319MB <TOSHIBA MK8032GSX AS112D> at ata0-master SATA150 acd0: DVDR <PHILIPS DVD+/-RW SDVD8820/AD15> at ata1-master UDMA33 SMP: AP CPU #1 Launched! Trying to mount root from ufs:/dev/ad0s2a bfe0: link state changed to UP pid 73303 (conftest), uid 0: exited on signal 11 (core dumped)
- Dell inspiron 6400 + FreeBSD, butcher, 08:38 , 18-Сен-07 (4)
|