Народ, хелп!!! Есть циска 7301. Через нее клиенты по pppoe ходят в инет. Настроил netflow. Но траф считается только с outside интерфейса. С inside почему то не хочет. Софт IP 12.4(3).
Что неправильно прописал?

ip cef
!
vpdn enable
!
vpdn-group pppoe
accept-dialin
  protocol pppoe
  virtual-template 1
pppoe limit per-mac 2
pppoe limit per-vlan 250
!
!
!
interface Loopback0
ip address 5.5.5.5 255.255.255.0
ip route-cache policy
ip route-cache flow
!
interface GigabitEthernet0/0
no ip address
ip access-group filter_inbound in
no ip redirects
no ip proxy-arp
ip route-cache policy
ip route-cache flow
duplex auto
speed auto
media-type rj45
negotiation auto
no cdp enable
!
interface GigabitEthernet0/0.70
encapsulation dot1Q 70
ip address X.X.X.X X.X.X.X
ip access-group filter_inbound in
no ip redirects
no ip proxy-arp
ip nat outside
ip policy route-map PPPoE
no snmp trap link-status
no cdp enable
!
interface GigabitEthernet0/0.71
encapsulation dot1Q 71
ip address X.X.X.X X.X.X.X
ip access-group filter_inbound in
no ip redirects
no ip proxy-arp
no snmp trap link-status
no cdp enable
!
interface GigabitEthernet0/1
no ip address
no ip redirects
no ip proxy-arp
ip route-cache policy
ip route-cache flow
duplex auto
speed auto
media-type rj45
negotiation auto
no cdp enable
!
interface GigabitEthernet0/1.100
encapsulation dot1Q 100
ip address X.X.X.X X.X.X.X
ip access-group outbound_filter in
no ip redirects
no ip proxy-arp
ip policy route-map SelectISP
no snmp trap link-status
no cdp enable
!
interface GigabitEthernet0/1.150
description -PPPoE-
encapsulation dot1Q 150
ip address 10.150.0.1 255.255.0.0
no ip redirects
ip nat inside
pppoe enable
no snmp trap link-status
no cdp enable

interface Virtual-Template1
ip unnumbered GigabitEthernet0/1.150
ip mtu 1492
ip nat inside
peer default ip address pool pppoe_clients
ppp authentication chap pap
!
ip local pool pppoe_clients 10.150.0.2 10.150.255.254
ip nat inside source list 125 interface GigabitEthernet0/0.70 overload
ip classless
ip flow-export source GigabitEthernet0/1.100
ip flow-export version 5
ip flow-export destination X.X.X.X 9800
no ip http server

access-list 150 permit ip any 10.150.0.0 0.0.255.255

route-map PPPoE permit 10
match ip address 150
set interface Loopback0 GigabitEthernet0/1.150