The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]




Версия для распечатки Пред. тема | След. тема
Новые ответы [ Отслеживать ]
не поднимается поток E1, !*! Sindjdf, 09-Дек-06, 14:46  [смотреть все]
У меня такая проблема

Имеется АТС М-200 -> VWIC-2MFT-G703 -> cisco 2611
не поднимается поток
планируетса dialup 30 линий

в конфиге

controller E1 0/0
framing NO-CRC4
clock source line primary
channel-group 0 timeslots 1-31

interface Serial0/0:0
description Digital_Modems
no ip address
encapsulation ppp
no ip route-cache
dialer in-band
dialer rotary-group 1
dialer-group 1
no snmp trap link-status
no peer default ip address
no fair-queue
pulse-time 1
no cdp enable

где копать?

  • не поднимается поток E1, !*! Basil, 17:07 , 09-Дек-06 (1)
    • не поднимается поток E1, !*! Sindjdf, 17:17 , 09-Дек-06 (2)
      >>У меня такая проблема
      >>
      >>Имеется АТС М-200 -> VWIC-2MFT-G703 -> cisco 2611
      >>не поднимается поток
      >>планируетса dialup 30 линий
      >>
      >>в конфиге
      >>
      >>controller E1 0/0
      >> framing NO-CRC4
      >> clock source line primary
      >> channel-group 0 timeslots 1-31
      >>
      >>interface Serial0/0:0
      >> description Digital_Modems
      >> no ip address
      >> encapsulation ppp
      >> no ip route-cache
      >> dialer in-band
      >> dialer rotary-group 1
      >> dialer-group 1
      >> no snmp trap link-status
      >> no peer default ip address
      >> no fair-queue
      >> pulse-time 1
      >> no cdp enable
      >>
      >>где копать?
      >
      >ммм если - это g703, то может на сериале encapsulation mtp2 ?
      >
      >
      >И какое состояние сериала ? line и protocol down ?


      TiksiDial#  sh protocol serial 0/0:0
      Serial0/0:0 is up, line protocol is down


      • не поднимается поток E1, !*! Basil, 18:09 , 09-Дек-06 (3)
        • не поднимается поток E1, !*! Sindjdf, 18:31 , 09-Дек-06 (4)
          >>>>У меня такая проблема
          >>>>
          >>>>Имеется АТС М-200 -> VWIC-2MFT-G703 -> cisco 2611
          >>>>не поднимается поток
          >>>>планируетса dialup 30 линий
          >>>>
          >>>>в конфиге
          >>>>
          >>>>controller E1 0/0
          >>>> framing NO-CRC4
          >>>> clock source line primary
          >>>> channel-group 0 timeslots 1-31
          >>>>
          >>>>interface Serial0/0:0
          >>>> description Digital_Modems
          >>>> no ip address
          >>>> encapsulation ppp
          >>>> no ip route-cache
          >>>> dialer in-band
          >>>> dialer rotary-group 1
          >>>> dialer-group 1
          >>>> no snmp trap link-status
          >>>> no peer default ip address
          >>>> no fair-queue
          >>>> pulse-time 1
          >>>> no cdp enable
          >>>>
          >>>>где копать?
          >>>
          >>>ммм если - это g703, то может на сериале encapsulation mtp2 ?
          >>>
          >>>
          >>>И какое состояние сериала ? line и protocol down ?
          >>
          >>
          >>TiksiDial#  sh protocol serial 0/0:0
          >>Serial0/0:0 is up, line protocol is down
          >
          >
          >Физика стоит :) дальше, проверять параметры с обоих сторон


          а что именно?

          • не поднимается поток E1, !*! Konstantin_from_Berdsk, 09:03 , 10-Дек-06 (5)
            • не поднимается поток E1, !*! Sindjdf, 09:40 , 10-Дек-06 (6)
              >>>>>>У меня такая проблема
              >>>>>>
              >>>>>>Имеется АТС М-200 -> VWIC-2MFT-G703 -> cisco 2611
              >>>>>>не поднимается поток
              >>>>>>планируетса dialup 30 линий
              >>>>>>
              >>>>>>в конфиге
              >>>>>>
              >>>>>>controller E1 0/0
              >>>>>> framing NO-CRC4
              >>>>>> clock source line primary
              >>>>>> channel-group 0 timeslots 1-31
              >>>>>>
              >>>>>>interface Serial0/0:0
              >>>>>> description Digital_Modems
              >>>>>> no ip address
              >>>>>> encapsulation ppp
              >>>>>> no ip route-cache
              >>>>>> dialer in-band
              >>>>>> dialer rotary-group 1
              >>>>>> dialer-group 1
              >>>>>> no snmp trap link-status
              >>>>>> no peer default ip address
              >>>>>> no fair-queue
              >>>>>> pulse-time 1
              >>>>>> no cdp enable
              >>>>>>
              >>>>>>где копать?
              >>>>>
              >>>>>ммм если - это g703, то может на сериале encapsulation mtp2 ?
              >>>>>
              >>>>>
              >>>>>И какое состояние сериала ? line и protocol down ?
              >>>>
              >>>>
              >>>>TiksiDial#  sh protocol serial 0/0:0
              >>>>Serial0/0:0 is up, line protocol is down
              >>>
              >>>
              >>>Физика стоит :) дальше, проверять параметры с обоих сторон
              >>
              >>
              >>а что именно?
              >
              >конфиг для М-200
              >// Link to xxxxx    PRI    
              >  side = 1   master
              > PCM [7] { PROFIL = 10
              >  PORT [1-30] { PROFIL = 11 GROUP = 6 }
              >
              > }
              >//
              >    PROFIL [10] { TYPE = PCM_DSS1 side =
              >1 fTarif =YES }
              >    PROFIL [11] { TYPE = SIG_DSS1  
              >}
              >//
              >    GROUP [6] { ROUTE=2 }
              >    DIR   [4] { 6  
              >    }//Link to xxxxx over MP-16(SetModNum=4)Port 7 Group
              >6
              >//
              >    ROUTE [2]  //Route for xxxxx
              > {
              > RECORD "NNNNNN"  4
              > }


              чесно говоря  не понял что вместо ххххх, и NNNNNN писать

  • не поднимается поток E1, !*! EL, 13:06 , 10-Дек-06 (8)
    • не поднимается поток E1, !*! Sindjdf, 16:03 , 10-Дек-06 (10)
      >>не поднимается поток
      >>планируетса dialup 30 линий
      >
      >>где копать?
      >sh controllers e1 0/0
      >что пишет?
      >что будет бегать в потоке (сигнализация какая)?


      E1 0/0 is up.
        Applique type is Channelized E1 - balanced
        No alarms detected.
        alarm-trigger is not set
        Version info Firmware: 20011015, FPGA: 11
        Framing is CRC4, Line Code is HDB3, Clock Source is Line Primary.
        Data in current interval (606 seconds elapsed):
           0 Line Code Violations, 0 Path Code Violations
           0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
           0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
        Data in Interval 1:
           0 Line Code Violations, 0 Path Code Violations
           0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
           0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
        Data in Interval 2:
           0 Line Code Violations, 0 Path Code Violations
           0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
           0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
        Data in Interval 3:
           0 Line Code Violations, 0 Path Code Violations
           0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
           0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
        Data in Interval 4:
           0 Line Code Violations, 0 Path Code Violations
           0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
           0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
        Data in Interval 5:
           0 Line Code Violations, 0 Path Code Violations
           0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
           0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
        Data in Interval 6:
           0 Line Code Violations, 0 Path Code Violations
           0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
           0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
        Data in Interval 7:
           0 Line Code Violations, 0 Path Code Violations
           0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
           0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
        Data in Interval 8:
           0 Line Code Violations, 0 Path Code Violations
           0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
           0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
        Data in Interval 9:
           0 Line Code Violations, 0 Path Code Violations
           0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
           0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
        Data in Interval 10:
           0 Line Code Violations, 0 Path Code Violations
           0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
           0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
        Data in Interval 11:
           0 Line Code Violations, 0 Path Code Violations
           0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
           0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
        Data in Interval 12:
           0 Line Code Violations, 0 Path Code Violations
           0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
           0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
        Data in Interval 13:
           0 Line Code Violations, 0 Path Code Violations
           0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
           0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
        Data in Interval 14:
           0 Line Code Violations, 0 Path Code Violations
           0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
           0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
        Data in Interval 15:
           0 Line Code Violations, 0 Path Code Violations
           0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
           0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
        Data in Interval 16:
           0 Line Code Violations, 0 Path Code Violations
           0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
           0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
        Data in Interval 17:
           0 Line Code Violations, 0 Path Code Violations
           0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
           0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
        Data in Interval 18:
           0 Line Code Violations, 0 Path Code Violations
           0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
           0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
        Data in Interval 19:
           0 Line Code Violations, 0 Path Code Violations
           0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
           0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
        Data in Interval 20:
           0 Line Code Violations, 0 Path Code Violations
           0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
           0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
        Data in Interval 21:
           0 Line Code Violations, 0 Path Code Violations
           0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
           0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
        Data in Interval 22:
           0 Line Code Violations, 0 Path Code Violations
           0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
           0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
        Data in Interval 23:
           7 Line Code Violations, 57 Path Code Violations
           3 Slip Secs, 75 Fr Loss Secs, 7 Line Err Secs, 0 Degraded Mins
           0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 87 Unavail Secs
        Total Data (last 23 15 minute intervals):
           7 Line Code Violations, 57 Path Code Violations,
           3 Slip Secs, 75 Fr Loss Secs, 7 Line Err Secs, 0 Degraded Mins,
           0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 87 Unavail Secs

  • не поднимается поток E1, !*! Nailer, 14:01 , 10-Дек-06 (9)
    • не поднимается поток E1, !*! Sindjdf, 16:04 , 10-Дек-06 (11)
      >>У меня такая проблема
      >>
      >>Имеется АТС М-200 -> VWIC-2MFT-G703 -> cisco 2611
      >>не поднимается поток
      >>планируетса dialup 30 линий
      >>
      >>в конфиге
      >>
      >>controller E1 0/0
      >> framing NO-CRC4
      >> clock source line primary
      >> channel-group 0 timeslots 1-31
      >>
      >>interface Serial0/0:0
      >> description Digital_Modems
      >> no ip address
      >> encapsulation ppp
      >> no ip route-cache
      >> dialer in-band
      >> dialer rotary-group 1
      >> dialer-group 1
      >> no snmp trap link-status
      >> no peer default ip address
      >> no fair-queue
      >> pulse-time 1
      >> no cdp enable
      >>
      >>где копать?
      >
      >И не подымется, так как 15 таймслот должен заходить на обработчик сигнализации
      >(карту цифровых модемов), а ее нету.
      >
      >На 2600 серии сделать dial-up не получится, на ней нету tdm-шины, а
      >она нужна.


      а на 17хх?




Партнёры:
PostgresPro
Inferno Solutions
Hosting by Hoster.ru
Хостинг:

Закладки на сайте
Проследить за страницей
Created 1996-2024 by Maxim Chirkov
Добавить, Поддержать, Вебмастеру