Здравствуйте!
Помогите, пожалуйста, сконфигурировать voice-port на Cisco 3800 Combo 01
с IOS 11.2 на борту так, чтобы:
1.Если подключить телефон в вvoice-port 0/0 , был слышен гудок
2.На этот же телефон можно заставить звонить с Ethernet 0/0

Вся сложность заключается в том, что не могу найти конфигурацию для данной
ИОС 11.2. Для 12.Х нашел кучу информации, большинство комманд из болеее
новых версий ИОС вообще не присутствуют в 11.2.
Заранее благодарю!

конфиг:
C-3801-7#sh run
Building configuration...

Current configuration:

version 11.2
no service finger
service nagle
no service pad
service password-encryption
no service udp-small-servers
no service tcp-small-servers
service pt-vty-logging
!
hostname C-3801-7
!
boot system flash c3800-j-mz.112-18.P.bin
aaa new-model
aaa authentication login default radius local
aaa authorization exec local
!
...
connect Voice2 Voice2 active
!
ip subnet-zero
ip rcmd rcp-enable
ip rcmd rsh-enable
ip rcmd remote-host edd 10.2.1.8 edd enable
ip rcmd source-interface Ethernet0/0
no ip domain-lookup
ip name-server 10.7.1.23
ip name-server 10.7.1.24
clock timezone EET 2
clock summer-time EEST recurring last Sun Mar 1:00 last Sun Oct 1:00
!
controller E1 0/0
shutdown
framing NO-CRC4
linecode ami
!
voice-port 0/0
gain input 10
gain output -10
vad
svc dial-peer voice 2
cptone Australia
timing wink-wait 1000
!
voice-port 0/1
dial-type pulse
shutdown
!
dial-peer voice 2 pots
port 0/0
coder adpcm32k
!
dial-peer voice 100 pots
port 0/0
pvc signaling translated
!
interface Loopback0
ip address 192.168.31.55 255.255.255.255
no logging event subif-link-status
!
interface Ethernet0/0
ip address 10.7.2.202 255.255.255.0
no logging event subif-link-status
no cdp enable
!
interface Serial0/1
no ip address
encapsulation ppp
no logging event subif-link-status
no keepalive
shutdown
media-type rs232
no cdp enable
!
interface Serial0/2
no ip address
encapsulation frame-relay
no logging event subif-link-status
shutdown
!
interface Serial0/3
no ip address
no logging event subif-link-status
shutdown
no cdp enable
!
interface Switch0
no ip address
encapsulation frame-relay
no logging event subif-link-status
shutdown
frame-relay traffic-shaping
frame-relay class fast
!
router ospf 1
network 192.168.1.0 0.0.0.255 area 0
!
router igrp 1
redistribute connected
network 10.0.0.0
!
ip classless
ip route 10.0.0.0 255.0.0.0 10.7.2.1
ip http server
ip http port 8080
ip http access-class 99
!
ip access-list extended e0-in
permit ip 10.7.0.0 0.0.255.255 any
deny   ipinip any any log
ip access-list extended e1-in
!
map-class frame-relay fast
no logging trap
access-list 99 permit 10.7.1.5
access-list 99 permit 10.7.2.2
no cdp run
!
snmp-server community test RO 99
snmp-server trap-source Ethernet0/0
snmp-server enable traps svplus
snmp-server enable traps config
snmp-server enable traps bgp
snmp-server enable traps frame-relay
snmp-server enable traps syslog
snmp-server enable traps rtr
snmp-server host 10.7.1.5 test
snmp-server host 10.7.2.2 test
dialer-list 1 protocol ip permit
radius-server host 10.7.1.5 auth-port 1812 acct-port 1813
radius-server key test
!
line con 0
exec-timeout 7 0
line vty 0 4
access-class 99 in
password 7 06120A3258
!
ntp clock-period 8589930
ntp server 10.7.1.5
ntp server 10.7.1.103
end