Проблема осталась VLAN 2 не работает

после выполнения следующих команд

router:#vlan database
router(vlan)#vlan 2 media ethernet name Vlan2

Выводиться сообщение:

Vlan can not be added. Maximum number of 1 vlan(s) in the database.

Делал по
http://www.cisco.com/en/US/products/hw/routers/ps380/product...

Я подумал может у меня IOS не потдерживает больше одного VLAN.

Начну все сначала:

interface ATM0
no ip address
no atm ilmi-keepalive
dsl operating-mode auto
!
interface ATM0.1 point-to-point
description $ES_WAN$
pvc 0/40
  encapsulation aal5snap
  pppoe-client dial-pool-number 1
!
!
interface FastEthernet0
no ip address
no cdp enable
!
interface FastEthernet1
switchport access vlan 2
no ip address
no cdp enable
!
interface FastEthernet2
switchport access vlan 3
no ip address
shutdown
no cdp enable
!
interface FastEthernet3
no ip address
shutdown
no cdp enable
!
interface Vlan1
description For users hotel
ip address 10.10.10.1 255.255.255.240
ip access-group 110 in
ip flow ingress
ip flow egress
ip nat inside
ip virtual-reassembly
ip tcp adjust-mss 1452
!
interface Vlan2
description For users Bussenes
ip address 192.168.2.1 255.255.255.252 secondary
ip address 192.168.1.1 255.255.255.252
ip flow ingress
ip flow egress
ip nat inside
ip virtual-reassembly
ip tcp adjust-mss 1452

router#sh vlan-switch

VLAN Name                             Status    Ports
---- -------------------------------- --------- -------------------------------
1    default                          active    Fa0, Fa3
1002 fddi-default                     active
1003 token-ring-default               active
1004 fddinet-default                  active
1005 trnet-default                    active

VLAN Type  SAID       MTU   Parent RingNo BridgeNo Stp  BrdgMode Trans1 Trans2
---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
1    enet  100001     1500  -      -      -        -    -        1002   1003
1002 fddi  101002     1500  -      -      -        -    -        1      1003
1003 tr    101003     1500  1005   0      -        -    srb      1      1002
1004 fdnet 101004     1500  -      -      1        ibm  -        0      0
1005 trnet 101005     1500  -      -      1        ibm  -        0      0

router#vlan database
router(vlan)#sh
  VLAN ISL Id: 1
    Name: default
    Media Type: Ethernet
    VLAN 802.10 Id: 100001
    State: Operational
    MTU: 1500
    Translational Bridged VLAN: 1002
    Translational Bridged VLAN: 1003

  VLAN ISL Id: 1002
    Name: fddi-default
    Media Type: FDDI
    VLAN 802.10 Id: 101002
    State: Operational
    MTU: 1500
    Bridge Type: SRB
    Translational Bridged VLAN: 1
    Translational Bridged VLAN: 1003

  VLAN ISL Id: 1003
    Name: token-ring-default
    Media Type: Token Ring
    VLAN 802.10 Id: 101003
    State: Operational
    MTU: 1500
    Bridge Type: SRB
    Ring Number: 0
    Bridge Number: 1
    Parent VLAN: 1005
    Maximum ARE Hop Count: 7
    Maximum STE Hop Count: 7
    Backup CRF Mode: Disabled
    Translational Bridged VLAN: 1
    Translational Bridged VLAN: 1002

  VLAN ISL Id: 1004
    Name: fddinet-default
    Media Type: FDDI Net
    VLAN 802.10 Id: 101004
    State: Operational
    MTU: 1500
    Bridge Type: SRB
    Bridge Number: 1
    STP Type: IBM

  VLAN ISL Id: 1005
    Name: trnet-default
    Media Type: Token Ring Net
    VLAN 802.10 Id: 101005
    State: Operational
    MTU: 1500
    Bridge Type: SRB
    Bridge Number: 1
    STP Type: IBM

sh ver

Cisco IOS Software, C870 Software (C870-ADVSECURITYK9-M), Version 12.3(8)YI2, RE
LEASE SOFTWARE (fc1)
Synched to technology version 12.3(10.3)T2
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2005 by Cisco Systems, Inc.
Compiled Tue 14-Jun-05 18:58 by ealyon

ROM: System Bootstrap, Version 12.3(8r)YI2, RELEASE SOFTWARE
ROM: Cisco IOS Software, C870 Software (C870-ADVSECURITYK9-M), Version 12.3(8)YI
2, RELEASE SOFTWARE (fc1)

Hotel_Medeo uptime is 4 days, 17 hours, 5 minutes
System returned to ROM by power-on
System restarted at 18:10:34 GMT Thu Jun 22 2006
System image file is "flash:c870-advsecurityk9-mz.123-8.YI2.bin"

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

Cisco 877 (MPC8272) processor (revision 0x200) with 118784K/12288K bytes of memo
ry.
Processor board ID FCZ100123UN
MPC8272 CPU Rev: Part Number 0xC, Mask Number 0x10
4 FastEthernet interfaces
1 ATM interface
128K bytes of non-volatile configuration memory.
24576K bytes of processor board System flash (Intel Strataflash)

router#sh int vlan2

Vlan2 is up, line protocol is down
  Hardware is EtherSVI, address is 0016.9d29.8927 (bia 0016.9d29.8927)
  Description: For users Bussenes
  Internet address is 192.168.1.1/30
  MTU 1500 bytes, BW 100000 Kbit, DLY 1000000 usec,
     reliability 255/255, txload 1/255, rxload 1/255
  Encapsulation ARPA, loopback not set
  ARP type: ARPA, ARP Timeout 04:00:00
  Last input never, output never, output hang never
  Last clearing of "show interface" counters never
  Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 1
  Queueing strategy: fifo
  Output queue: 0/40 (size/max)
  5 minute input rate 0 bits/sec, 0 packets/sec
  5 minute output rate 0 bits/sec, 0 packets/sec
     0 packets input, 0 bytes, 0 no buffer
     Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
     0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
     0 packets output, 0 bytes, 0 underruns
     0 output errors, 3 interface resets
     0 output buffer failures, 0 output buffers swapped out

router#sh int faste1
FastEthernet1 is up, line protocol is up
  Hardware is Fast Ethernet, address is 0016.9d29.8928 (bia 0016.9d29.8928)
  MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec,
     reliability 255/255, txload 1/255, rxload 1/255
  Encapsulation ARPA, loopback not set
  Keepalive set (10 sec)
  Full-duplex, 100Mb/s
  ARP type: ARPA, ARP Timeout 04:00:00
  Last input never, output never, output hang never
  Last clearing of "show interface" counters never
  Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
  Queueing strategy: fifo
  Output queue: 0/40 (size/max)
  5 minute input rate 0 bits/sec, 0 packets/sec
  5 minute output rate 0 bits/sec, 0 packets/sec
     147 packets input, 24053 bytes, 0 no buffer
     Received 135 broadcasts, 0 runts, 0 giants, 0 throttles
     0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
     0 input packets with dribble condition detected
     384 packets output, 32114 bytes, 0 underruns
     0 output errors, 0 collisions, 2 interface resets
     0 babbles, 0 late collision, 0 deferred
     0 lost carrier, 0 no carrier
     0 output buffer failures, 0 output buffers swapped out