 Cisco 2610 стала часто перегружаться.,  boffin, 28-Июн-05, 17:04 [смотреть все]Здравствуйте,
Помогите пожалуйста решить проблему.
Циска стала перегружаться раз 15 - 50 минут.
Посоветуйте пожалуйста что можно сделать?
Может IOS побиться?
Вот наверное в чем проблема
"System returned to ROM by error - a SIGTRAP exception, PC 0x807BC210 at 20:30:53"Вот вывод команды sh ver: c2610>sh ver.75.181_ECHO
IOS (tm) C2600 Software (C2600-IO3-M), Version 12.0(7)T, RELEASE SOFTWARE (fc2):16:19:
0 *HDLC*) -> <address> (3/3), 1 packet4/500) current 1-min rate: li Compiled Tue 07-Dec-99 03:30 by phanguye
Image text-base: 0x80008088, data-base: 0x80814F5C ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1) c2610 uptime is 49 minutes
System returned to ROM by error - a SIGTRAP exception, PC 0x807BC210 at 20:30:53
MSK Mon Mar 1 1993
System image file is "flash:c2600-io3-mz.120-7.T" cisco 2610 (MPC860) processor (revision 0x203) with 26624K/6144K bytes of memory
.
Processor board ID JAD04350583 (1803260452)
M860 processor: part number 0, mask 49
Bridging software.
X.25 software, Version 3.0.0.
1 Ethernet/IEEE 802.3 interface(s)
1 Serial network interface(s)
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read/Write) Configuration register is 0x2102 Спасибо! |
- Cisco 2610 стала часто перегружаться., Сайко, 17:11 , 28-Июн-05 (1)
- Cisco 2610 стала часто перегружаться., boffin, 17:17 , 28-Июн-05 (2)
c2610>sh stacks5 Cwe 802ACF04
Minimum process stacks: 0 5600/6000 0 C
Free/Size Name]
01:12:17: %SEC-
5600/6000 CDP Protocolpermitted icmp 66.193.21.
9932/12000 InitB450 8
5484/6000 PostOfficeNet00 0 Pool Managernet0/0,
5352/6000 RADIUS INITCONFIG (3/3), 1 packet, 1 packet
1 483404 7148/9000 Network interfaces
2 0 9000/9000 Timebase Reference Interrupt
3 0 9000/9000 PA Management Int Handler
6 597 8912/9000 16552 Con/Aux Interrupt
7 227707 8920/9000 MPC860 TIMER INTERRUPTSystem was restarted by error - a SIGTRAP exception, PC 0x802C013C at 20:30:53 M
SK Mon Mar 1 1993
C2600 Software (C2600-IO3-M), Version 12.0(7)T, RELEASE SOFTWARE (fc2)
Compiled Tue 07-Dec-99 03:30 by phanguye (current version)
Image text-base: 0x80008088, data-base: 0x80814F5C
Stack trace from system failure:
FP: 0x80D05F98, RA: 0x80D05FB8
FP: 0x80D06020, RA: 0x802B2D10
FP: 0x80D06060, RA: 0x802B05CC
FP: 0x80D06090, RA: 0x802B111C
FP: 0x80D060A8, RA: 0x807BC230
FP: 0x80D060E0, RA: 0x807B5C5C
FP: 0x80D06100, RA: 0x8079767C
FP: 0x80D06398, RA: 0x807967D0
c2610>sh flash System flash directory:
File Length Name/status
1 4519168 c2600-io3-mz.120-7.T
2 4600 conf [deleted]
3 4273 conf
4 3977 bpftp
[4532280 bytes used, 3856328 available, 8388608 total]
8192K bytes of processor board System flash (Read/Write)
- Cisco 2610 стала часто перегружаться., Сайко, 17:21 , 28-Июн-05 (3)
- Cisco 2610 стала часто перегружаться., boffin, 17:23 , 28-Июн-05 (4)
>а можно вывод без мусора:
>01:12:17: %SEC-
>и т.п. Извините c2610>sh stacks
Minimum process stacks:
Free/Size Name
5600/6000 CDP Protocol
9932/12000 Init
5484/6000 PostOfficeNet
5352/6000 RADIUS INITCONFIG
7592/9000 DHCP Client
10584/12000 Virtual Exec Interrupt level stacks:
Level Called Unused/Size Name
1 748415 7148/9000 Network interfaces
2 0 9000/9000 Timebase Reference Interrupt
3 0 9000/9000 PA Management Int Handler
6 1017 8912/9000 16552 Con/Aux Interrupt
7 331933 8920/9000 MPC860 TIMER INTERRUPT System was restarted by error - a SIGTRAP exception, PC 0x802C013C at 20:30:53 MSK Mon Mar 1 1993
C2600 Software (C2600-IO3-M), Version 12.0(7)T, RELEASE SOFTWARE (fc2)
Compiled Tue 07-Dec-99 03:30 by phanguye (current version)
Image text-base: 0x80008088, data-base: 0x80814F5C
Stack trace from system failure:
FP: 0x80D05F98, RA: 0x80D05FB8
FP: 0x80D06020, RA: 0x802B2D10
FP: 0x80D06060, RA: 0x802B05CC
FP: 0x80D06090, RA: 0x802B111C
FP: 0x80D060A8, RA: 0x807BC230
FP: 0x80D060E0, RA: 0x807B5C5C
FP: 0x80D06100, RA: 0x8079767C
FP: 0x80D06398, RA: 0x807967D0
c2610>sh flash System flash directory:
File Length Name/status
1 4519168 c2600-io3-mz.120-7.T
2 4600 conf [deleted]
3 4273 conf
4 3977 bpftp
[4532280 bytes used, 3856328 available, 8388608 total]
8192K bytes of processor board System flash (Read/Write)
- Cisco 2610 стала часто перегружаться., Сайко, 17:26 , 28-Июн-05 (5)
- Cisco 2610 стала часто перегружаться., boffin, 17:32 , 28-Июн-05 (6)
- Cisco 2610 стала часто перегружаться., Сайко, 17:45 , 28-Июн-05 (8)
- Cisco 2610 стала часто перегружаться., boffin, 19:22 , 28-Июн-05 (9)
И все же спасибо Вам, да и доступа у меня нет на Cisco.
Скачали IOS c2600-io3-mz.122-29.bin , залили, ошибки нет.
За IOS снова спасибо, так как в инете нашел только c2600-io3-mz.121-6.binc2610#sh ver
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-IO3-M), Version 12.2(29), RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2005 by cisco Systems, Inc.
Compiled Wed 11-May-05 17:27 by kellmill
Image text-base: 0x8000808C, data-base: 0x80A6CD88 ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
ROM: C2600 Software (C2600-IO3-M), Version 12.2(29), RELEASE SOFTWARE (fc3) c2610 uptime is 21 minutes
System returned to ROM by reload
System image file is "flash:c2600_io3_mz.122_29" cisco 2610 (MPC860) processor (revision 0x203) with 28672K/4096K bytes of memory.
Processor board ID JAD04350583 (1803260452)
M860 processor: part number 0, mask 49
Bridging software.
X.25 software, Version 3.0.0.
1 Ethernet/IEEE 802.3 interface(s)
1 Serial network interface(s)
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read/Write) Configuration register is 0x2102 PS. Мир не без добрых людей!
|
Версия для распечатки
