Исходное сообщение
"DHCP для Vlan" Отправлено Kan, 27-Июн-06 09:25
Проблема осталась VLAN 2 не работает после выполнения следующих команд router:#vlan database router(vlan)#vlan 2 media ethernet name Vlan2 Выводиться сообщение: Vlan can not be added. Maximum number of 1 vlan(s) in the database. Делал по http://www.cisco.com/en/US/products/hw/routers/ps380/product... Я подумал может у меня IOS не потдерживает больше одного VLAN. Начну все сначала: interface ATM0 no ip address no atm ilmi-keepalive dsl operating-mode auto ! interface ATM0.1 point-to-point description $ES_WAN$ pvc 0/40   encapsulation aal5snap   pppoe-client dial-pool-number 1 ! ! interface FastEthernet0 no ip address no cdp enable ! interface FastEthernet1 switchport access vlan 2 no ip address no cdp enable ! interface FastEthernet2 switchport access vlan 3 no ip address shutdown no cdp enable ! interface FastEthernet3 no ip address shutdown no cdp enable ! interface Vlan1 description For users hotel ip address 10.10.10.1 255.255.255.240 ip access-group 110 in ip flow ingress ip flow egress ip nat inside ip virtual-reassembly ip tcp adjust-mss 1452 ! interface Vlan2 description For users Bussenes ip address 192.168.2.1 255.255.255.252 secondary ip address 192.168.1.1 255.255.255.252 ip flow ingress ip flow egress ip nat inside ip virtual-reassembly ip tcp adjust-mss 1452 router#sh vlan-switch VLAN Name                             Status    Ports ---- -------------------------------- --------- ------------------------------- 1    default                          active    Fa0, Fa3 1002 fddi-default                     active 1003 token-ring-default               active 1004 fddinet-default                  active 1005 trnet-default                    active VLAN Type  SAID       MTU   Parent RingNo BridgeNo Stp  BrdgMode Trans1 Trans2 ---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------ 1    enet  100001     1500  -      -      -        -    -        1002   1003 1002 fddi  101002     1500  -      -      -        -    -        1      1003 1003 tr    101003     1500  1005   0      -        -    srb      1      1002 1004 fdnet 101004     1500  -      -      1        ibm  -        0      0 1005 trnet 101005     1500  -      -      1        ibm  -        0      0 router#vlan database router(vlan)#sh   VLAN ISL Id: 1     Name: default     Media Type: Ethernet     VLAN 802.10 Id: 100001     State: Operational     MTU: 1500     Translational Bridged VLAN: 1002     Translational Bridged VLAN: 1003   VLAN ISL Id: 1002     Name: fddi-default     Media Type: FDDI     VLAN 802.10 Id: 101002     State: Operational     MTU: 1500     Bridge Type: SRB     Translational Bridged VLAN: 1     Translational Bridged VLAN: 1003   VLAN ISL Id: 1003     Name: token-ring-default     Media Type: Token Ring     VLAN 802.10 Id: 101003     State: Operational     MTU: 1500     Bridge Type: SRB     Ring Number: 0     Bridge Number: 1     Parent VLAN: 1005     Maximum ARE Hop Count: 7     Maximum STE Hop Count: 7     Backup CRF Mode: Disabled     Translational Bridged VLAN: 1     Translational Bridged VLAN: 1002   VLAN ISL Id: 1004     Name: fddinet-default     Media Type: FDDI Net     VLAN 802.10 Id: 101004     State: Operational     MTU: 1500     Bridge Type: SRB     Bridge Number: 1     STP Type: IBM   VLAN ISL Id: 1005     Name: trnet-default     Media Type: Token Ring Net     VLAN 802.10 Id: 101005     State: Operational     MTU: 1500     Bridge Type: SRB     Bridge Number: 1     STP Type: IBM sh ver Cisco IOS Software, C870 Software (C870-ADVSECURITYK9-M), Version 12.3(8)YI2, RE LEASE SOFTWARE (fc1) Synched to technology version 12.3(10.3)T2 Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2005 by Cisco Systems, Inc. Compiled Tue 14-Jun-05 18:58 by ealyon ROM: System Bootstrap, Version 12.3(8r)YI2, RELEASE SOFTWARE ROM: Cisco IOS Software, C870 Software (C870-ADVSECURITYK9-M), Version 12.3(8)YI 2, RELEASE SOFTWARE (fc1) Hotel_Medeo uptime is 4 days, 17 hours, 5 minutes System returned to ROM by power-on System restarted at 18:10:34 GMT Thu Jun 22 2006 System image file is "flash:c870-advsecurityk9-mz.123-8.YI2.bin" This product contains cryptographic features and is subject to United States and local country laws governing import, export, transfer and use. Delivery of Cisco cryptographic products does not imply third-party authority to import, export, distribute or use encryption. Importers, exporters, distributors and users are responsible for compliance with U.S. and local country laws. By using this product you agree to comply with applicable laws and regulations. If you are unable to comply with U.S. and local laws, return this product immediately. A summary of U.S. laws governing Cisco cryptographic products may be found at: http://www.cisco.com/wwl/export/crypto/tool/stqrg.html If you require further assistance please contact us by sending email to export@cisco.com. Cisco 877 (MPC8272) processor (revision 0x200) with 118784K/12288K bytes of memo ry. Processor board ID FCZ100123UN MPC8272 CPU Rev: Part Number 0xC, Mask Number 0x10 4 FastEthernet interfaces 1 ATM interface 128K bytes of non-volatile configuration memory. 24576K bytes of processor board System flash (Intel Strataflash) router#sh int vlan2 Vlan2 is up, line protocol is down   Hardware is EtherSVI, address is 0016.9d29.8927 (bia 0016.9d29.8927)   Description: For users Bussenes   Internet address is 192.168.1.1/30   MTU 1500 bytes, BW 100000 Kbit, DLY 1000000 usec,      reliability 255/255, txload 1/255, rxload 1/255   Encapsulation ARPA, loopback not set   ARP type: ARPA, ARP Timeout 04:00:00   Last input never, output never, output hang never   Last clearing of "show interface" counters never   Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 1   Queueing strategy: fifo   Output queue: 0/40 (size/max)   5 minute input rate 0 bits/sec, 0 packets/sec   5 minute output rate 0 bits/sec, 0 packets/sec      0 packets input, 0 bytes, 0 no buffer      Received 0 broadcasts, 0 runts, 0 giants, 0 throttles      0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored      0 packets output, 0 bytes, 0 underruns      0 output errors, 3 interface resets      0 output buffer failures, 0 output buffers swapped out router#sh int faste1 FastEthernet1 is up, line protocol is up   Hardware is Fast Ethernet, address is 0016.9d29.8928 (bia 0016.9d29.8928)   MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec,      reliability 255/255, txload 1/255, rxload 1/255   Encapsulation ARPA, loopback not set   Keepalive set (10 sec)   Full-duplex, 100Mb/s   ARP type: ARPA, ARP Timeout 04:00:00   Last input never, output never, output hang never   Last clearing of "show interface" counters never   Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0   Queueing strategy: fifo   Output queue: 0/40 (size/max)   5 minute input rate 0 bits/sec, 0 packets/sec   5 minute output rate 0 bits/sec, 0 packets/sec      147 packets input, 24053 bytes, 0 no buffer      Received 135 broadcasts, 0 runts, 0 giants, 0 throttles      0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored      0 input packets with dribble condition detected      384 packets output, 32114 bytes, 0 underruns      0 output errors, 0 collisions, 2 interface resets      0 babbles, 0 late collision, 0 deferred      0 lost carrier, 0 no carrier      0 output buffer failures, 0 output buffers swapped out

Ваше сообщение
Имя*:
EMail:	Для отправки новых сообщений в текущей нити на email укажите знак ! перед адресом, например, !user@host.ru (!! - не показывать email). Более тонкая настройка отправки ответов производится в профиле зарегистрированного участника форума.
Заголовок*:
Сообщение*:	> Проблема осталась VLAN 2 не работает > после выполнения следующих команд > router:#vlan database > router(vlan)#vlan 2 media ethernet name Vlan2 > Выводиться сообщение: > Vlan can not be added. Maximum number of 1 vlan(s) in the > database. > Делал по > http://www.cisco.com/en/US/products/hw/routers/ps380/products_configuration_guide_chapter09186a008045d272.html#wp42306 > Я подумал может у меня IOS не потдерживает больше одного VLAN. > Начну все сначала: > interface ATM0 > no ip address > no atm ilmi-keepalive > dsl operating-mode auto > ! > interface ATM0.1 point-to-point > description $ES_WAN$ > pvc 0/40 > encapsulation aal5snap > pppoe-client dial-pool-number 1 > ! > ! > interface FastEthernet0 > no ip address > no cdp enable > ! > interface FastEthernet1 > switchport access vlan 2 > no ip address > no cdp enable > ! > interface FastEthernet2 > switchport access vlan 3 > no ip address > shutdown > no cdp enable > ! > interface FastEthernet3 > no ip address > shutdown > no cdp enable > ! > interface Vlan1 > description For users hotel > ip address 10.10.10.1 255.255.255.240 > ip access-group 110 in > ip flow ingress > ip flow egress > ip nat inside > ip virtual-reassembly > ip tcp adjust-mss 1452 > ! > interface Vlan2 > description For users Bussenes > ip address 192.168.2.1 255.255.255.252 secondary > ip address 192.168.1.1 255.255.255.252 > ip flow ingress > ip flow egress > ip nat inside > ip virtual-reassembly > ip tcp adjust-mss 1452 > router#sh vlan-switch > VLAN Name > > Status > Ports > ---- -------------------------------- --------- ------------------------------- > 1 default > > active > Fa0, Fa3 > 1002 fddi-default > active > 1003 token-ring-default > active > 1004 fddinet-default > active > 1005 trnet-default > active > VLAN Type SAID MTU > Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2 > ---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------ > 1 enet 100001 1500 > - - > - - > - > 1002 1003 > 1002 fddi 101002 1500 - > - - > - > - 1 > 1003 > 1003 tr 101003 1500 > 1005 0 - > - srb > 1 > 1002 > 1004 fdnet 101004 1500 - > - 1 > ibm - > 0 > 0 > 1005 trnet 101005 1500 - > - 1 > ibm - > 0 > 0 > router#vlan database > router(vlan)#sh > VLAN ISL Id: 1 > Name: default > Media Type: Ethernet > VLAN 802.10 Id: 100001 > State: Operational > MTU: 1500 > Translational Bridged VLAN: 1002 > Translational Bridged VLAN: 1003 > VLAN ISL Id: 1002 > Name: fddi-default > Media Type: FDDI > VLAN 802.10 Id: 101002 > State: Operational > MTU: 1500 > Bridge Type: SRB > Translational Bridged VLAN: 1 > Translational Bridged VLAN: 1003 > VLAN ISL Id: 1003 > Name: token-ring-default > Media Type: Token Ring > VLAN 802.10 Id: 101003 > State: Operational > MTU: 1500 > Bridge Type: SRB > Ring Number: 0 > Bridge Number: 1 > Parent VLAN: 1005 > Maximum ARE Hop Count: 7 > Maximum STE Hop Count: 7 > Backup CRF Mode: Disabled > Translational Bridged VLAN: 1 > Translational Bridged VLAN: 1002 > VLAN ISL Id: 1004 > Name: fddinet-default > Media Type: FDDI Net > VLAN 802.10 Id: 101004 > State: Operational > MTU: 1500 > Bridge Type: SRB > Bridge Number: 1 > STP Type: IBM > VLAN ISL Id: 1005 > Name: trnet-default > Media Type: Token Ring Net > VLAN 802.10 Id: 101005 > State: Operational > MTU: 1500 > Bridge Type: SRB > Bridge Number: 1 > STP Type: IBM > sh ver > Cisco IOS Software, C870 Software (C870-ADVSECURITYK9-M), Version 12.3(8)YI2, RE > LEASE SOFTWARE (fc1) > Synched to technology version 12.3(10.3)T2 > Technical Support: http://www.cisco.com/techsupport > Copyright (c) 1986-2005 by Cisco Systems, Inc. > Compiled Tue 14-Jun-05 18:58 by ealyon > ROM: System Bootstrap, Version 12.3(8r)YI2, RELEASE SOFTWARE > ROM: Cisco IOS Software, C870 Software (C870-ADVSECURITYK9-M), Version 12.3(8)YI > 2, RELEASE SOFTWARE (fc1) > Hotel_Medeo uptime is 4 days, 17 hours, 5 minutes > System returned to ROM by power-on > System restarted at 18:10:34 GMT Thu Jun 22 2006 > System image file is "flash:c870-advsecurityk9-mz.123-8.YI2.bin" > This product contains cryptographic features and is subject to United > States and local country laws governing import, export, transfer and > use. Delivery of Cisco cryptographic products does not imply > third-party authority to import, export, distribute or use encryption. > Importers, exporters, distributors and users are responsible for > compliance with U.S. and local country laws. By using this product you > agree to comply with applicable laws and regulations. If you are unable > to comply with U.S. and local laws, return this product immediately. > A summary of U.S. laws governing Cisco cryptographic products may be found > at: > http://www.cisco.com/wwl/export/crypto/tool/stqrg.html > If you require further assistance please contact us by sending email to > export@cisco.com. > Cisco 877 (MPC8272) processor (revision 0x200) with 118784K/12288K bytes of memo > ry. > Processor board ID FCZ100123UN > MPC8272 CPU Rev: Part Number 0xC, Mask Number 0x10 > 4 FastEthernet interfaces > 1 ATM interface > 128K bytes of non-volatile configuration memory. > 24576K bytes of processor board System flash (Intel Strataflash) > router#sh int vlan2 > Vlan2 is up, line protocol is down > Hardware is EtherSVI, address is 0016.9d29.8927 (bia 0016.9d29.8927) > Description: For users Bussenes > Internet address is 192.168.1.1/30 > MTU 1500 bytes, BW 100000 Kbit, DLY 1000000 usec, > reliability 255/255, txload 1/255, rxload 1/255 > Encapsulation ARPA, loopback not set > ARP type: ARPA, ARP Timeout 04:00:00 > Last input never, output never, output hang never > Last clearing of "show interface" counters never > Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 1 > Queueing strategy: fifo > Output queue: 0/40 (size/max) > 5 minute input rate 0 bits/sec, 0 packets/sec > 5 minute output rate 0 bits/sec, 0 packets/sec > 0 packets input, 0 bytes, 0 no > buffer > Received 0 broadcasts, 0 runts, 0 giants, > 0 throttles > 0 input errors, 0 CRC, 0 frame, > 0 overrun, 0 ignored > 0 packets output, 0 bytes, 0 underruns > 0 output errors, 3 interface resets > 0 output buffer failures, 0 output buffers > swapped out > router#sh int faste1 > FastEthernet1 is up, line protocol is up > Hardware is Fast Ethernet, address is 0016.9d29.8928 (bia 0016.9d29.8928) > MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec, > reliability 255/255, txload 1/255, rxload 1/255 > Encapsulation ARPA, loopback not set > Keepalive set (10 sec) > Full-duplex, 100Mb/s > ARP type: ARPA, ARP Timeout 04:00:00 > Last input never, output never, output hang never > Last clearing of "show interface" counters never > Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 > Queueing strategy: fifo > Output queue: 0/40 (size/max) > 5 minute input rate 0 bits/sec, 0 packets/sec > 5 minute output rate 0 bits/sec, 0 packets/sec > 147 packets input, 24053 bytes, 0 no > buffer > Received 135 broadcasts, 0 runts, 0 giants, > 0 throttles > 0 input errors, 0 CRC, 0 frame, > 0 overrun, 0 ignored > 0 input packets with dribble condition detected > 384 packets output, 32114 bytes, 0 underruns > 0 output errors, 0 collisions, 2 interface > resets > 0 babbles, 0 late collision, 0 deferred > 0 lost carrier, 0 no carrier > 0 output buffer failures, 0 output buffers > swapped out
	Введите код, изображенный на картинке: