Всем привет!
Установил FreeBSD 7.01, поставил дополнительно два винта, в системе определились как ad4 и ad6. Создал на двух винтах файловую систему newfs -U /dev/ad4, также с ad6. При монтировании винтов mount /dev/ad4 /mnt1 команда срабатывает как надо без проблем, а при монтировании ad6 выдает ошибку " mount: /dev/ad6 : Invalid argument ". Подскажите, что я делаю не так.
******* Working on device /dev/ad4 *******
parameters extracted from in-core disklabel are:
cylinders=1938021 heads=16 sectors/track=63 (1008 blks/cyl)
Figures below won't work with BIOS for partitions not in cyl 1
parameters to be used for BIOS calculations are:
cylinders=1938021 heads=16 sectors/track=63 (1008 blks/cyl)
fdisk: invalid fdisk partition table found
Media sector size is 512
Warning: BIOS sector numbering starts with sector 1
Information from DOS bootblock is:
The data for partition 1 is:
sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD)
start 63, size 1953525105 (953869 Meg), flag 80 (active)
beg: cyl 0/ head 1/ sector 1;
end: cyl 612/ head 15/ sector 63
The data for partition 2 is:
<UNUSED>
The data for partition 3 is:
<UNUSED>
The data for partition 4 is:
<UNUSED>
******* Working on device /dev/ad6 *******
parameters extracted from in-core disklabel are:
cylinders=1938021 heads=16 sectors/track=63 (1008 blks/cyl)
Figures below won't work with BIOS for partitions not in cyl 1
parameters to be used for BIOS calculations are:
cylinders=1938021 heads=16 sectors/track=63 (1008 blks/cyl)
fdisk: invalid fdisk partition table found
Media sector size is 512
Warning: BIOS sector numbering starts with sector 1
Information from DOS bootblock is:
The data for partition 1 is:
sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD)
start 63, size 1953525105 (953869 Meg), flag 80 (active)
beg: cyl 0/ head 1/ sector 1;
end: cyl 612/ head 15/ sector 63
The data for partition 2 is:
<UNUSED>
The data for partition 3 is:
<UNUSED>
The data for partition 4 is:
<UNUSED>
