The OpenNET Project
 
Search (keywords):  SOFT ARTICLES TIPS & TRICKS SECURITY
LINKS NEWS MAN DOCUMENTATION


[NEWS] Cisco VPN Concentrator Groupname Enumeration Vulnerability


<< Previous INDEX Search src Set bookmark Go to bookmark Next >>
From: SecuriTeam <support@securiteam.com.>
To: list@securiteam.com
Date: 20 Jun 2005 15:21:53 +0200
Subject: [NEWS] Cisco VPN Concentrator Groupname Enumeration Vulnerability
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Message-Id: <20050620123905.A61A1573B@mail.tyumen.ru.>
X-Virus-Scanned: antivirus-gw at tyumen.ru

The following security advisory is sent to the securiteam mailing list, and can be found at the SecuriTeam web site: http://www.securiteam.com
- - promotion

The SecuriTeam alerts list - Free, Accurate, Independent.

Get your security news from a reliable source.
http://www.securiteam.com/mailinglist.html 

- - - - - - - - -




  Cisco VPN Concentrator Groupname Enumeration Vulnerability
------------------------------------------------------------------------


SUMMARY

NTA Monitor has discovered a groupname enumeration vulnerability in the 
Cisco VPN 3000 series concentrator products while performing a VPN 
security test for a customer.

The vulnerability affects remote access VPNs with groupname 
authentication. Site-to-site VPN operation is not affected, nor is remote 
access with certificate authentication. In practice, we find that most 
concentrators are configured for remote access with groupname 
authentication, so this bug will affect the majority of users.

The vulnerability allows an attacker to use a dictionary attack to 
determine valid group names on the concentrator. Once a valid group name 
is determined, the attacker can then use this to obtain a hash from the 
concentrator, which can then be cracked offline to determine the group 
password.

Once an attacker has a valid groupname and group password, they can 
potentially mount a Man-in-the-Middle (MitM) attack against the XAUTH user 
authentication mechanism. This allows the attacker to snoop on VPN 
traffic, alter VPN traffic, or gain access to the network protected by the 
VPN. This MitM attack works even if strong authentication such as SecurID 
is used for user authentication.

DETAILS

Affected Versions:
The issue is believed to affect all models of Cisco VPN 3000 Concentrator: 
3005, 3015, 3020, 3030, 3060 and 3080. We believe that all software 
versions prior to 4.1.7.F are vulnerable.

Technical Details:
The vulnerability allows an attacker to enumerate valid groupnames on a 
Cisco VPN concentrator through either a dictionary attack, or a 
brute-force attack. The issue exists because the concentrator responds to 
valid groupnames differently to the way in which it responds to invalid 
groupnames.

The exploit involves sending an IKE Aggressive Mode packet with the 
groupname to be tested in the Identity (ID) payload. The ID Type is 11, 
which corresponds to ID_KEY_ID. If the specified groupname is valid, the 
concentrator will respond; if it is not valid, then the concentrator will 
not respond. The ike-scan tool can be used to demonstrate this 
vulnerability.

The vulnerability is present in both normal IKE over UDP, and also Cisco 
proprietary TCP-encapsulated IKE. The ike-scan tool can use either 
transport type: for Cisco IKE in TCP, you need to specify the option 
--tcp=2. When using TCP encapsulation, an invalid groupname causes the 
concentrator to send a TCP RST packet, which causes ike-scan to return the 
error message "recvfrom: Connection reset by peer".

The groupname guessing rate depends on the bandwidth between the 
attacker's system and the concentrator. Because most of the group names 
tried will be incorrect, and therefore the concentrator won't respond, 
it's only the bandwidth from the attacker to the concentrator that 
matters; the bandwidth from the concentrator back to the attacker is not 
important.

An IKE aggressive mode packet with a single transform, using 
Diffie-Hellman group 2, and having an eight character groupname has an IKE 
packet size of 256 bytes. Adding the eight byte UDP header and 20 byte IP 
header gives a total size of 284 bytes or 2,272 bits. Assuming a link 
speed of 2Mbits/sec, this gives a guessing rate of 2,000,000 / 2,272 = 880 
guesses per second.

A guessing rate of 880 per second is 3,168,000 per hour or 76,032,000 per 
day. This rate is sufficient to perform an extensive dictionary attack, or 
a limited brute-force attack. The concentrator does not limit the 
groupname guessing rate, nor does it blacklist hosts that perform 
groupname enumeration: in tests, it was possible to get a successful 
response to a valid groupname immediately after thousands of incorrect 
attempts.

Once a valid groupname is obtained, it is possible to use this groupname 
to obtain a hash from the concentrator, and mount an offline 
password-guessing attack against this hash to obtain the group password. 
Because the password-guessing process is offline, it is fast (hundreds of 
thousands of guesses per second), and will not cause the concentrator to 
log any authentication failures.

A valid groupname and password allows the attacker to complete IKE Phase-1 
and establish an ISAKMP SA to the concentrator. They can then mount a 
Man-in-the-Middle (MitM) attack against the second-stage 
user-authentication process, which is typically XAUTH.

The offline password guessing process and MitM attack against XAUTH are 
detailed in the VPN flaws whitepaper at
 <http://www.nta-monitor.com/news/vpn-flaws/VPN-Flaws-Whitepaper.pdf>; 
http://www.nta-monitor.com/news/vpn-flaws/VPN-Flaws-Whitepaper.pdf.

Example:
The example below shows the two different concentrator responses: the 
first is for the valid groupname "finance", and the second is for the 
invalid groupname "administration". We see that the concentrator responds 
to valid groupname, but not to the invalid one. Because of this difference 
in behaviour, it is possible to determine whether a given groupname is 
valid or not.

The ike-scan options used in this example are:
-A Specify IKE Aggressive Mode. The default for ike-scan is Main Mode.
--idtype=11 Specify ID Type 11 for the ID payload. This corresponds to 
ID_KEY_ID.
-M Multiline: Display each payload on a separate line, which makes the 
output easier to read.
--auth=65001 Specify authentication method 65001, which corresponds to 
XAUTH.
--id=finance Specify the string to be used for the ID payload.
10.0.0.1 The IP address of the target VPN concentrator.

3.1. Response to valid groupname "finance":
$ ike-scan -A --idtype=11 -M --auth=65001 --id=finance 10.0.0.1
Starting ike-scan 1.7.2 with 1 hosts 
(http://www.nta-monitor.com/ike-scan/)
10.0.0.1 Aggressive Mode Handshake returned
SA=(Enc=3DES Hash=MD5 Group=2:modp1024 Auth=XAUTH LifeType=Seconds 
LifeDuration=28800)
KeyExchange(128 bytes) Nonce(20 bytes) ID(Type=ID_IPV4_ADDR, 
Value=10.0.0.1) Hash(16 bytes)
VID=12f5f28c457168a9702d9fe274cc0100 (Cisco Unity)
VID=09002689dfd6b712 (XAUTH)
VID=afcad71368a1f1c96b8696fc77570100 (Dead Peer Detection)
VID=4048b7d56ebce88525e7de7f00d6c2d3c0000000 (IKE Fragmentation)
VID=65963c60eacf802220adccf628738746
VID=1f07f70eaa6514d3b0fa96542a500400 (Cisco VPN Concentrator)

Ending ike-scan 1.7.2: 1 hosts scanned in 0.423 seconds (2.36 hosts/sec). 
1 returned handshake; 0 returned notify

3.2. Response to invalid groupname "administration":
$ ike-scan -A --idtype=11 -M --auth=65001 --id=administration 10.0.0.1
Starting ike-scan 1.7.2 with 1 hosts 
(http://www.nta-monitor.com/ike-scan/)

Ending ike-scan 1.7.2: 1 hosts scanned in 0.594 seconds (1.68 hosts/sec). 
0 returned handshake;
0 returned notify

Solution:
Upgrade to software version 4.1.7.F or later. Cisco customers with a valid 
login may obtain the new software from the Cisco website. Cisco has stated 
in the release notes that this software version is not vulnerable to the 
issue, but NTA Monitor have not verified this claim.

Alternatively, use certificate authentication rather than group 
authentication. This vulnerability does not apply to certificate
authentication.

Timeline:
The vulnerability was first discovered on 8th July 2004, and was reported 
to Cisco's security team (PSIRT) on 20th September 2004. Cisco were able 
to reproduce the issue using the ike-scan tool, and bug ID CSCeg00323 was 
opened on 11th October 2004. Software version 4.1.7.F, which claims to 
have fixed the issue, was released on 19th May 2005.

References:
Cisco Bug ID CSCeg00323 "vpn3k - inconsistent behavior on scanning".NTA 
Monitor advisory
 
<http://www.nta-monitor.com/news/vpn-flaws/cisco/VPN-Concentrator/index.htm>; http://www.nta-monitor.com/news/vpn-flaws/cisco/VPN-Concentrator/index.htm


ADDITIONAL INFORMATION

The information has been provided by  <mailto:Roy.Hills@nta-monitor.com.> 
Roy Hills.
The original article can be found at:  
<http://www.nta-monitor.com/news/vpn-flaws/VPN-Flaws-Whitepaper.pdf>; 
http://www.nta-monitor.com/news/vpn-flaws/VPN-Flaws-Whitepaper.pdf




This bulletin is sent to members of the SecuriTeam mailing list. To unsubscribe from the list, send mail with an empty subject line and body to: list-unsubscribe@securiteam.com In order to subscribe to the mailing list, simply forward this email to: list-subscribe@securiteam.com

DISCLAIMER: The information in this bulletin is provided "AS IS" without warranty of any kind. In no event shall we be liable for any damages whatsoever including direct, indirect, incidental, consequential, loss of business profits or special damages.

<< Previous INDEX Search src Set bookmark Go to bookmark Next >>



Партнёры:
PostgresPro
Inferno Solutions
Hosting by Hoster.ru
Хостинг:

Закладки на сайте
Проследить за страницей
Created 1996-2024 by Maxim Chirkov
Добавить, Поддержать, Вебмастеру