Вот такая проблема, имеем ленточную библиотеку MSL2024 и Настроенную BACULu OS CENTOS

Сперва при насторйке как и пологалось промаркеровал касеты и добавил их в пул
всё шло хорошо бекапилось и записовалось но вот в прекраснный момент, бакула выдала ошибку  

27-Р˜СЋРЅ 03:00 localhost.localdomain-sd JobId 58: Error: block.c:571 Write error at 6:2 on device "MSL2024" (/dev/nst0). ERR=Ошибка ввода/вывода.
27-Р˜СЋРЅ 03:01 localhost.localdomain-sd JobId 58: Error: Backspace record at EOT failed. ERR=Ошибка ввода/вывода.
несмогла записать на ленту и переключила другую ленту и записала, при следующем бекапе такаяже проюлемма не может записать на туже ленту переключает другую записывает и так далее.
Такое ощющение что бакула считает после первой записи что касета полная в чём может быть дело, ведь до этого всё шло хорошо у меня стоят в двух разных организациях одинаковые системы за исключением что в одной стоит LTO3  а в другой LTO2 ,в одной всё нормально, а вот тут проблемма.

Вот лог бакулы с до ошибки и после
вместо РЅРµ найденРрусские буквы ERR=Ошибка ввода/вывода

13-Р˜СЋРЅ 06:00 localhost.localdomain-dir JobId 55: shell command: run AfterJob "/etc/bacula/delete_catalog_backup"
20-Р˜СЋРЅ 03:00 localhost.localdomain-dir JobId 56: Start Backup JobId 56, Job=Backup_DCM4.2010-06-20_03.00.00_36
20-Р˜СЋРЅ 03:00 localhost.localdomain-dir JobId 56: Using Device "MSL2024"
20-Р˜СЋРЅ 03:00 localhost.localdomain-sd JobId 56: Job write elapsed time = 00:00:01, Transfer rate = 99  bytes/second
20-Р˜СЋРЅ 03:00 localhost.localdomain-sd JobId 56: Alert: sh: tapeinfo: команда не найденна
20-Р˜СЋРЅ 03:00 localhost.localdomain-dir JobId 56: Bacula localhost.localdomain-dir 3.0.3 (18Oct09): 20-Р˜СЋРЅ-2010 03:00:03
  Build OS:               i686-pc-linux-gnu redhat
  JobId:                  56
  Job:                    Backup_DCM4.2010-06-20_03.00.00_36
  Backup Level:           Incremental, since=2010-06-13 03:00:02
  Client:                 "localhost.localdomain-fd" 3.0.3 (18Oct09) i686-pc-linux-gnu,redhat,
  FileSet:                "My_Set" 2010-04-15 14:44:39
  Pool:                   "My_Pool" (From Job resource)
  Catalog:                "MyCatalog" (From Client resource)
  Storage:                "msl2024" (From Job resource)
  Scheduled time:         20-Р˜СЋРЅ-2010 03:00:00
  Start time:             20-Р˜СЋРЅ-2010 03:00:03
  End time:               20-Р˜СЋРЅ-2010 03:00:03
  Elapsed time:           0 secs
  Priority:               10
  FD Files Written:       1
  SD Files Written:       1
  FD Bytes Written:       0 (0 B)
  SD Bytes Written:       99 (99 B)
  Rate:                   0.0 KB/s
  Software Compression:   None
  VSS:                    no
  Encryption:             no
  Accurate:               no
  Volume name(s):         tape1
  Volume Session Id:      27
  Volume Session Time:    1271406325
  Last Volume Bytes:      1,450,874,880 (1.450 GB)
  Non-fatal FD errors:    0
  SD Errors:              0
  FD termination status:  OK
  SD termination status:  OK
  Termination:            Backup OK

20-Р˜СЋРЅ 03:00 localhost.localdomain-dir JobId 56: shell command: run AfterJob "/bin/clearing"
20-Р˜СЋРЅ 06:00 localhost.localdomain-dir JobId 57: shell command: run BeforeJob "/etc/bacula/make_catalog_backup bacula bacula"
20-Р˜СЋРЅ 06:00 localhost.localdomain-dir JobId 57: Start Backup JobId 57, Job=BackupCatalog.2010-06-20_06.00.00_37
20-Р˜СЋРЅ 06:00 localhost.localdomain-dir JobId 57: Using Device "FileStorage"
20-Р˜СЋРЅ 06:00 localhost.localdomain-sd JobId 57: Volume "DiskCatalog" previously written, moving to end of data.
20-Р˜СЋРЅ 06:00 localhost.localdomain-sd JobId 57: Ready to append to end of Volume "DiskCatalog" size=14241336
20-Р˜СЋРЅ 06:00 localhost.localdomain-sd JobId 57: Job write elapsed time = 00:00:01, Transfer rate = 5.647 M bytes/second
20-Р˜СЋРЅ 06:00 localhost.localdomain-dir JobId 57: Bacula localhost.localdomain-dir 3.0.3 (18Oct09): 20-Р˜СЋРЅ-2010 06:00:03
  Build OS:               i686-pc-linux-gnu redhat
  JobId:                  57
  Job:                    BackupCatalog.2010-06-20_06.00.00_37
  Backup Level:           Incremental, since=2010-06-13 06:00:05
  Client:                 "localhost.localdomain-fd" 3.0.3 (18Oct09) i686-pc-linux-gnu,redhat,
  FileSet:                "Catalog" 2010-04-14 12:56:56
  Pool:                   "My_Pool_Catalog" (From Job resource)
  Catalog:                "MyCatalog" (From Client resource)
  Storage:                "File" (From Job resource)
  Scheduled time:         20-Р˜СЋРЅ-2010 06:00:00
  Start time:             20-Р˜СЋРЅ-2010 06:00:03
  End time:               20-Р˜СЋРЅ-2010 06:00:03
  Elapsed time:           0 secs
  Priority:               11
  FD Files Written:       3
  SD Files Written:       3
  FD Bytes Written:       5,647,153 (5.647 MB)
  SD Bytes Written:       5,647,516 (5.647 MB)
  Rate:                   0.0 KB/s
  Software Compression:   None
  VSS:                    no
  Encryption:             no
  Accurate:               no
  Volume name(s):         DiskCatalog
  Volume Session Id:      28
  Volume Session Time:    1271406325
  Last Volume Bytes:      19,893,538 (19.89 MB)
  Non-fatal FD errors:    0
  SD Errors:              0
  FD termination status:  OK
  SD termination status:  OK
  Termination:            Backup OK

До этого момента всё хорошо а вот тут пошла ошибка

20-Р˜СЋРЅ 06:00 localhost.localdomain-dir JobId 57: shell command: run AfterJob "/etc/bacula/delete_catalog_backup"
27-Р˜СЋРЅ 03:00 localhost.localdomain-dir JobId 58: Start Backup JobId 58, Job=Backup_DCM4.2010-06-27_03.00.00_38
27-Р˜СЋРЅ 03:00 localhost.localdomain-dir JobId 58: Using Device "MSL2024"
27-Р˜СЋРЅ 03:00 localhost.localdomain-sd JobId 58: Error: block.c:571 Write error at 6:2 on device "MSL2024" (/dev/nst0). ERR=Ошибка ввода/вывода.
27-Р˜СЋРЅ 03:01 localhost.localdomain-sd JobId 58: Error: Backspace record at EOT failed. ERR=Ошибка ввода/вывода.
27-Р˜СЋРЅ 03:01 localhost.localdomain-sd JobId 58: End of medium on Volume "tape1" Bytes=1,450,939,392 Blocks=22,490 at 27-Р˜СЋРЅ-2010 03:01.
27-Р˜СЋРЅ 03:01 localhost.localdomain-sd JobId 58: 3307 Issuing autochanger "unload slot 1, drive 0" command.
27-Р˜СЋРЅ 03:02 localhost.localdomain-sd JobId 58: 3301 Issuing autochanger "loaded? drive 0" command.
27-Р˜СЋРЅ 03:02 localhost.localdomain-sd JobId 58: 3302 Autochanger "loaded? drive 0", result: nothing loaded.
27-Р˜СЋРЅ 03:02 localhost.localdomain-sd JobId 58: 3304 Issuing autochanger "load slot 2, drive 0" command.
27-Р˜СЋРЅ 03:03 localhost.localdomain-sd JobId 58: 3305 Autochanger "load slot 2, drive 0", status is OK.
27-Р˜СЋРЅ 03:03 localhost.localdomain-sd JobId 58: Wrote label to prelabeled Volume "tape2" on device "MSL2024" (/dev/nst0)
27-Р˜СЋРЅ 03:03 localhost.localdomain-sd JobId 58: New volume "tape2" mounted on device "MSL2024" (/dev/nst0) at 27-Р˜СЋРЅ-2010 03:03.
27-Р˜СЋРЅ 03:15 localhost.localdomain-sd JobId 58: Job write elapsed time = 00:13:17, Transfer rate = 20.07 M bytes/second
27-Р˜СЋРЅ 03:15 localhost.localdomain-sd JobId 58: Alert: sh: tapeinfo: команда РЅРµ найдена
27-Р˜СЋРЅ 03:15 localhost.localdomain-dir JobId 58: Bacula localhost.localdomain-dir 3.0.3 (18Oct09): 27-Р˜СЋРЅ-2010 03:15:56
  Build OS:               i686-pc-linux-gnu redhat
  JobId:                  58
  Job:                    Backup_DCM4.2010-06-27_03.00.00_38
  Backup Level:           Incremental, since=2010-06-20 03:00:03
  Client:                 "localhost.localdomain-fd" 3.0.3 (18Oct09) i686-pc-linux-gnu,redhat,
  FileSet:                "My_Set" 2010-04-15 14:44:39
  Pool:                   "My_Pool" (From Job resource)
  Catalog:                "MyCatalog" (From Client resource)
  Storage:                "msl2024" (From Job resource)
  Scheduled time:         27-Р˜СЋРЅ-2010 03:00:00
  Start time:             27-Р˜СЋРЅ-2010 03:00:02
  End time:               27-Р˜СЋРЅ-2010 03:15:56
  Elapsed time:           15 mins 54 secs
  Priority:               10
  FD Files Written:       4,821
  SD Files Written:       4,821
  FD Bytes Written:       15,996,139,520 (15.99 GB)
  SD Bytes Written:       15,996,896,990 (15.99 GB)
  Rate:                   16767.4 KB/s
  Software Compression:   None
  VSS:                    no
  Encryption:             no
  Accurate:               no
  Volume name(s):         tape1|tape2
  Volume Session Id:      29
  Volume Session Time:    1271406325
  Last Volume Bytes:      16,008,910,848 (16.00 GB)
  Non-fatal FD errors:    0
  SD Errors:              2
  FD termination status:  OK
  SD termination status:  OK
  Termination:            Backup OK -- with warnings

27-Р˜СЋРЅ 03:15 localhost.localdomain-dir JobId 58: shell command: run AfterJob "/bin/clearing"
27-Р˜СЋРЅ 06:00 localhost.localdomain-dir JobId 59: shell command: run BeforeJob "/etc/bacula/make_catalog_backup bacula bacula"
27-Р˜СЋРЅ 06:00 localhost.localdomain-dir JobId 59: Start Backup JobId 59, Job=BackupCatalog.2010-06-27_06.00.00_39
27-Р˜СЋРЅ 06:00 localhost.localdomain-dir JobId 59: Using Device "FileStorage"
27-Р˜СЋРЅ 06:00 localhost.localdomain-sd JobId 59: Volume "DiskCatalog" previously written, moving to end of data.
27-Р˜СЋРЅ 06:00 localhost.localdomain-sd JobId 59: Ready to append to end of Volume "DiskCatalog" size=19893538
27-Р˜СЋРЅ 06:00 localhost.localdomain-sd JobId 59: Job write elapsed time = 00:00:01, Transfer rate = 94.71 M bytes/second
27-Р˜СЋРЅ 06:00 localhost.localdomain-dir JobId 59: Bacula localhost.localdomain-dir 3.0.3 (18Oct09): 27-Р˜СЋРЅ-2010 06:00:18
  Build OS:               i686-pc-linux-gnu redhat
  JobId:                  59
  Job:                    BackupCatalog.2010-06-27_06.00.00_39
  Backup Level:           Incremental, since=2010-06-20 06:00:03
  Client:                 "localhost.localdomain-fd" 3.0.3 (18Oct09) i686-pc-linux-gnu,redhat,
  FileSet:                "Catalog" 2010-04-14 12:56:56
  Pool:                   "My_Pool_Catalog" (From Job resource)
  Catalog:                "MyCatalog" (From Client resource)
  Storage:                "File" (From Job resource)
  Scheduled time:         27-Р˜СЋРЅ-2010 06:00:00
  Start time:             27-Р˜СЋРЅ-2010 06:00:18
  End time:               27-Р˜СЋРЅ-2010 06:00:18
  Elapsed time:           0 secs
  Priority:               11
  FD Files Written:       3
  SD Files Written:       3
  FD Bytes Written:       94,711,375 (94.71 MB)
  SD Bytes Written:       94,711,739 (94.71 MB)
  Rate:                   0.0 KB/s
  Software Compression:   None
  VSS:                    no
  Encryption:             no
  Accurate:               no
  Volume name(s):         DiskCatalog
  Volume Session Id:      30
  Volume Session Time:    1271406325
  Last Volume Bytes:      114,676,023 (114.6 MB)
  Non-fatal FD errors:    0
  SD Errors:              0
  FD termination status:  OK
  SD termination status:  OK
  Termination:            Backup OK

27-Р˜СЋРЅ 06:00 localhost.localdomain-dir JobId 59: shell command: run AfterJob "/etc/bacula/delete_catalog_backup"
04-Р˜СЋР» 03:00 localhost.localdomain-dir JobId 60: Start Backup JobId 60, Job=Backup_DCM4.2010-07-04_03.00.00_40
04-Р˜СЋР» 03:00 localhost.localdomain-dir JobId 60: Using Device "MSL2024"
04-Р˜СЋР» 03:00 localhost.localdomain-sd JobId 60: Error: block.c:571 Write error at 17:1 on device "MSL2024" (/dev/nst0). ERR=Ошибка РІРІРѕРґР°/вывода.
04-Р˜СЋР» 03:01 localhost.localdomain-sd JobId 60: Error: Backspace record at EOT failed. ERR=Ошибка РІРІРѕРґР°/вывода
04-Р˜СЋР» 03:01 localhost.localdomain-sd JobId 60: End of medium on Volume "tape2" Bytes=16,008,975,360 Blocks=248,154 at 04-Р˜СЋР»-2010 03:01.
04-Р˜СЋР» 03:01 localhost.localdomain-sd JobId 60: 3307 Issuing autochanger "unload slot 2, drive 0" command.
04-Р˜СЋР» 03:03 localhost.localdomain-sd JobId 60: 3301 Issuing autochanger "loaded? drive 0" command.
04-Р˜СЋР» 03:03 localhost.localdomain-sd JobId 60: 3302 Autochanger "loaded? drive 0", result: nothing loaded.
04-Р˜СЋР» 03:03 localhost.localdomain-sd JobId 60: 3304 Issuing autochanger "load slot 3, drive 0" command.
04-Р˜СЋР» 03:03 localhost.localdomain-sd JobId 60: 3305 Autochanger "load slot 3, drive 0", status is OK.
04-Р˜СЋР» 03:03 localhost.localdomain-sd JobId 60: Wrote label to prelabeled Volume "tape3" on device "MSL2024" (/dev/nst0)
04-Р˜СЋР» 03:03 localhost.localdomain-sd JobId 60: New volume "tape3" mounted on device "MSL2024" (/dev/nst0) at 04-Р˜СЋР»-2010 03:03.
04-Р˜СЋР» 03:19 localhost.localdomain-sd JobId 60: Job write elapsed time = 00:16:40, Transfer rate = 19.98 M bytes/second
04-Р˜СЋР» 03:19 localhost.localdomain-sd JobId 60: Alert: sh: tapeinfo: команда РЅРµ найдена
04-Р˜СЋР» 03:19 localhost.localdomain-dir JobId 60: Bacula localhost.localdomain-dir 3.0.3 (18Oct09): 04-Р˜СЋР»-2010 03:19:26
  Build OS:               i686-pc-linux-gnu redhat
  JobId:                  60
  Job:                    Backup_DCM4.2010-07-04_03.00.00_40
  Backup Level:           Incremental, since=2010-06-27 03:00:02
  Client:                 "localhost.localdomain-fd" 3.0.3 (18Oct09) i686-pc-linux-gnu,redhat,
  FileSet:                "My_Set" 2010-04-15 14:44:39
  Pool:                   "My_Pool" (From Job resource)
  Catalog:                "MyCatalog" (From Client resource)
  Storage:                "msl2024" (From Job resource)
  Scheduled time:         04-Р˜СЋР»-2010 03:00:00
  Start time:             04-Р˜СЋР»-2010 03:00:02
  End time:               04-Р˜СЋР»-2010 03:19:26
  Elapsed time:           19 mins 24 secs
  Priority:               10
  FD Files Written:       5,870
  SD Files Written:       5,870
  FD Bytes Written:       19,984,148,480 (19.98 GB)
  SD Bytes Written:       19,985,070,657 (19.98 GB)
  Rate:                   17168.5 KB/s
  Software Compression:   None
  VSS:                    no
  Encryption:             no
  Accurate:               no
  Volume name(s):         tape2|tape3
  Volume Session Id:      31
  Volume Session Time:    1271406325
  Last Volume Bytes:      20,000,074,752 (20.00 GB)
  Non-fatal FD errors:    0
  SD Errors:              2
  FD termination status:  OK
  SD termination status:  OK
  Termination:            Backup OK -- with warnings

Помогите кто чем может кто советом кто ссылкой на умное место)))  заранее благадарю