>[оверквотинг удален]
>> ip address 176.xxx.yyy.1 255.255.255.0
>> no ip redirects
>> no ip unreachables
>> no ip proxy-arp
>> no ip mroute-cache
>> Что может быть тут не так?
> Как меряли? что говорит sh int в это время? какова общая нагрузка
> на фабрику?
> Вообще на этот модуль вагон условий/ограничений
> http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/io... Data_main#sh int giga 7/14
GigabitEthernet7/14 is up, line protocol is up (connected)
Hardware is C6k 1000Mb 802.3, address is 0013.1a80.fa25 (bia 0013.1a80.fa25)
Description: --# Segment 176.119.0.0/24
MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec,
reliability 255/255, txload 32/255, rxload 2/255
Encapsulation ARPA, loopback not set
Keepalive set (10 sec)
Full-duplex, 1000Mb/s, media type is 10/100/1000BaseT
input flow-control is off, output flow-control is off
Clock mode is auto
ARP type: ARPA, ARP Timeout 04:00:00
Last input never, output never, output hang never
Last clearing of "show interface" counters 00:08:09
Input queue: 0/2000/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5 minute input rate 10789000 bits/sec, 5930 packets/sec
5 minute output rate 127143000 bits/sec, 13136 packets/sec
2804796 packets input, 727163595 bytes, 0 no buffer
Received 12 broadcasts (0 multicasts)
0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
0 watchdog, 0 multicast, 0 pause input
0 input packets with dribble condition detected
6248341 packets output, 7681929916 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 babbles, 0 late collision, 0 deferred
0 lost carrier, 0 no carrier, 0 PAUSE output
0 output buffer failures, 0 output buffers swapped out
Как посмотреть общую нагрузку на фабрику?
Data_main#sh fabric utilization
slot channel speed Ingress % Egress %
1 0 20G 0 0
1 1 20G 3 1
2 0 20G 0 0
2 1 20G 1 1
3 0 20G 0 0
3 1 20G 1 3
4 0 20G 0 0
4 1 20G 0 0
5 0 20G 0 0
6 0 8G 0 0
7 0 20G 0 0
7 1 20G 0 1
8 0 8G 0 0
9 0 8G 0 0
Это оно?