The OpenNET Project / Index page

[ новости /+++ | форум | wiki | теги | ]

форумы  помощь  поиск  регистрация  майллист  ВХОД  слежка  RSS
"Win 2000 Prof не видит UNIX-сервер с Samba"
Вариант для распечатки Архивированная нить - только для чтения! 
Пред. тема | След. тема 
Форумы OpenNET: Виртуальная конференция (Public)
Изначальное сообщение [Проследить за развитием треда]

"Win 2000 Prof не видит UNIX-сервер с Samba"
Сообщение от ser_ker emailИскать по авторуВ закладки(ok) on 28-Сен-04, 13:28  (MSK)
Компьютер с установленым Windows 2000 Prof Не видит сервер с установленными SCO OpenServer 5.0 & Samba, при этом ping Проходит, другие компьютеры в сети (Win 98, Win ME, Win XP) видит и они его.

С другого компьютера если смотреть сеть, то и сервер и этот комп в одной группе.

В чем может заключаться проблема ?

Сергей

  Рекомендовать в FAQ | Cообщить модератору | Наверх

 Оглавление

Индекс форумов | Темы | Пред. тема | След. тема
Сообщения по теме

1. "Win 2000 Prof не видит UNIX-сервер с Samba"
Сообщение от Gennadi emailИскать по авторуВ закладки(ok) on 28-Сен-04, 21:33  (MSK)
>Компьютер с установленым Windows 2000 Prof Не видит сервер с установленными SCO
>OpenServer 5.0 & Samba, при этом ping Проходит, другие компьютеры в
>сети (Win 98, Win ME, Win XP) видит и они его.
>
>
>С другого компьютера если смотреть сеть, то и сервер и этот комп
>в одной группе.
>
>В чем может заключаться проблема ?
>
>Сергей

В smb.conf

  Рекомендовать в FAQ | Cообщить модератору | Наверх

2. "Win 2000 Prof не видит UNIX-сервер с Samba"
Сообщение от ser_ker emailИскать по авторуВ закладки(??) on 29-Сен-04, 09:59  (MSK)
>В smb.conf

Это и так ясно, а конкретнее ?

Вот содержимое smb.conf
>>
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options (perhaps too
# many!) most of which are not shown in this example
#
# Any line which starts with a ; (semi-colon) or a # (hash)
# is a comment and is ignored. In this example we will use a #
# for commentry and a ; for parts of the config file that you
# may wish to enable
#
# NOTE: Whenever you modify this file you should run the command "testparm"
# to check that you have not many any basic syntactic errors.
#
#======================= Global Settings =====================================
[global]

# Code Page
character set=ISO8859-5
client code page=866


# debug level = 5

# workgroup = NT-Domain-Name or Workgroup-Name, eg: REDHAT4
   workgroup =SERVER

# server string is the equivalent of the NT Description field
   server string = Samba Server

# This option is important for security. It allows you to restrict
# connections to machines which are on your local network. The
# following example restricts access to two C class networks and
# the "loopback" interface. For more examples of the syntax see
# the smb.conf man page
;   hosts allow = 192.168.1. 192.168.2. 127.

# If you want to automatically load your printer list rather
# than setting them up individually then you'll need this
   load printers = no

# you may wish to override the location of the printcap file
;   printcap name = /etc/printcap

# on SystemV system setting printcap name to lpstat should allow
# you to automatically obtain a printer list from the SystemV spool
# system
;   printcap name = lpstat

# It should not be necessary to specify the print system type unless
# it is non-standard. Currently supported print systems include:
# bsd, sysv, plp, lprng, aix, hpux, qnx
;   printing = bsd

# Uncomment this if you want a guest account, you must add this to /etc/passwd
# otherwise the user "nobody" is used
#;  guest account = pcguest

# this tells Samba to use a separate log file for each machine
# that connects
   log file = /usr/local/samba/var/log.%m

# Put a capping on the size of the log files (in Kb).
   max log size = 50

# Security mode. Most people will want user level security. See
# security_level.txt for details.
   security = user
# Use password server option only with security = server
;   password server = <NT-Server-Name>

# You may wish to use password encryption. Please read
# ENCRYPTION.txt, Win95.txt and WinNT.txt in the Samba documentation.
# Do not enable this option unless you have read those documents
;  encrypt passwords = yes
  encrypt passwords = no

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
;   include = /usr/local/samba/lib/smb.conf.%m

# Most people will find that this option gives better performance.
# See speed.txt and the manual pages for details
   socket options = TCP_NODELAY

# Configure Samba to use multiple interfaces
# If you have multiple network interfaces then you must list them
# here. See the man page for details.
;   interfaces = 192.168.12.2/24 192.168.13.2/24

# Browser Control Options:
# set local master to no if you don't want Samba to become a master
# browser on your network. Otherwise the normal election rules apply
;   local master = no

# OS Level determines the precedence of this server in master browser
# elections. The default value should be reasonable
;   os level = 33

# Domain Master specifies Samba to be the Domain Master Browser. This
# allows Samba to collate browse lists between subnets. Don't use this
# if you already have a Windows NT domain controller doing this job
#   domain master = yes
#   domain master = no

# Preferred Master causes Samba to force a local browser election on startup
# and gives it a slightly higher chance of winning the election
#   preferred master = yes
#   preferred master = no

# Use only if you have an NT server on your network that has been
# configured at install time to be a primary domain controller.
;   domain controller = <NT-Domain-Controller-SMBName>

# Enable this if you want Samba to be a domain logon server for
# Windows95 workstations.
#;   domain logons = yes

# if you enable domain logons then you may want a per-machine or
# per user logon script
# run a specific logon batch file per workstation (machine)
;   logon script = %m.bat
# run a specific logon batch file per username
;   logon script = %U.bat

# Where to store roving profiles (only for Win95 and WinNT)
#        %L substitutes for this servers netbios name, %U is username
#        You must uncomment the [Profiles] share below
;   logon path = \\%L\Profiles\%U

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
;   wins support = yes

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
;   wins server = w.x.y.z

# WINS Proxy - Tells Samba to answer name resolution queries on
# behalf of a non WINS capable client, for this to work there must be
# at least one WINS Server on the network. The default is NO.
;   wins proxy = yes

# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
# via DNS nslookups. The built-in default for versions 1.9.17 is yes,
# this has been changed in version 1.9.18 to no.
   dns proxy = no

#============================ Share Definitions ==============================
[homes]
   comment = Home Directories
   browseable = no
   writable = yes
   locking = no
   share modes = yes
   oplocks = false


# Un-comment the following and create the netlogon directory for Domain Logons
; [netlogon]
;   comment = Network Logon Service
;   path = /usr/local/samba/lib/netlogon
;   guest ok = yes
;   writable = no
;   share modes = no


# Un-comment the following to provide a specific roving profile share
# the default is to use the user's home directory
;[Profiles]
;    path = /usr/local/samba/profiles
;    browseable = no
;    guest ok = yes


# NOTE: If you have a BSD-style print system there is no need to
# specifically define each individual printer
#[printers]
#   comment = All Printers
#   path = /usr/spool/samba
#   browseable = no
# Set public = yes to allow user 'guest account' to print
#   guest ok = no
#   writable = no
#   printable = yes


[pxbank]
   comment = software
   path = /home/pxbank
   public = yes
   writable = yes
   printable = no
   locking = yes
   share modes = yes
   oplocks = false
#  level2 oplocks = true
   create mask = 0765
   directory mask = 0775

[bo11]
   comment = software
   path = /home/bo11/Work
   public = yes
   writable = yes
   printable = no
   locking = yes
   share modes = yes
   oplocks = false
#  level2 oplocks = true
   create mask = 0777
   directory mask = 0775


[bo21]
   comment = software
   path = /home/bo21/Work
   public = yes
   writable = yes
   printable = no
   locking = yes
   share modes = yes
   oplocks = false
#  level2 oplocks = true
   create mask = 0777
   directory mask = 0775

>>

Сергей

  Рекомендовать в FAQ | Cообщить модератору | Наверх

3. "Win 2000 Prof не видит UNIX-сервер с Samba"
Сообщение от Halt emailИскать по авторуВ закладки on 29-Сен-04, 10:24  (MSK)
encrypt passwords = no
попробуй в yes выставить, только что настраивал тоже 2000 винда не видела пока в ноу был, правда не проверял под другими виндами
самбу ставил из портов FreeBSD 5.2.1-RELEASE

воспользовался http://linux.yaroslavl.ru/docs/serv/samba/samba22.html

пока вот с этим не разобрался
Эти две строчки отвечают за нормальныю перекодировку имен файлов.
character set = KOI8-R
client code page = 866
(самба сгенерила фалйик в своей кодировке в /tmp теперь никак похерить его не могу (произошло видимо из за того что я ее кильнул при обращению к нему))


мой smb.conf
[global]

# workgroup = NT-Domain-Name or Workgroup-Name, eg: REDHAT4
   workgroup = WORKGROUP

netbios name = Mycomputer

# server string is the equivalent of the NT Description field
   server string = Samba Server

hosts allow = 192.168.1. 192.168.1. 127.

# Uncomment this if you want a guest account, you must add this to /etc/passwd
# otherwise the user "nobody" is used
  guest account = nobody

# this tells Samba to use a separate log file for each machine
# that connects
   log file = /var/log/log.%m

# Put a capping on the size of the log files (in Kb).
   max log size = 50

# Security mode. Most people will want user level security. See
# security_level.txt for details.
   security = server

# Use password server option only with security = server
# The argument list may include:
#   password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name]
# or to auto-locate the domain controller/s
#   password server = *
;   password server = <NT-Server-Name>
password server = server


# You may wish to use password encryption. Please read
# ENCRYPTION.txt, Win95.txt and WinNT.txt in the Samba documentation.
# Do not enable this option unless you have read those documents
  encrypt passwords = yes

# Most people will find that this option gives better performance.
# See speed.txt and the manual pages for details
# You may want to add the following on a Linux system:
#         SO_RCVBUF=8192 SO_SNDBUF=8192
   socket options = TCP_NODELAY

# NOTE: If you have a BSD-style print system there is no need to
# specifically define each individual printer
[printers]
   comment = All Printers
   path = /var/spool/samba
   browseable = no
# Set public = yes to allow user 'guest account' to print
   guest ok = no
   writeable = no
   printable = yes

# This one is useful for people to share files
[tmp]
   comment = Temporary file space
   path = /tmp/samba
   read only = no
   public = yes

  Рекомендовать в FAQ | Cообщить модератору | Наверх


Удалить

Индекс форумов | Темы | Пред. тема | След. тема
Пожалуйста, прежде чем написать сообщение, ознакомьтесь с данными рекомендациями.




Спонсоры:
Inferno Solutions
Hosting by Hoster.ru
Хостинг:

Закладки на сайте
Проследить за страницей
Created 1996-2020 by Maxim Chirkov
Добавить, Поддержать, Вебмастеру