The OpenNET Project / Index page

[ новости /+++ | форум | wiki | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 ТемаНаборКатегория 
 
 [Cписок руководств | Печать]

random (3)
  • random (3) ( Solaris man: Библиотечные вызовы )
  • >> random (3) ( FreeBSD man: Библиотечные вызовы )
  • random (3) ( Русские man: Библиотечные вызовы )
  • random (3) ( Linux man: Библиотечные вызовы )
  • random (3) ( POSIX man: Библиотечные вызовы )
  • random (4) ( FreeBSD man: Специальные файлы /dev/* )
  • random (4) ( Русские man: Специальные файлы /dev/* )
  • random (4) ( Linux man: Специальные файлы /dev/* )
  • random (7) ( Solaris man: Макропакеты и соглашения )
  • random (9) ( FreeBSD man: Ядро )
  • Ключ random обнаружен в базе ключевых слов.

  • BSD mandoc
     

    NAME

    
    
    random
    
     
    srandom
    
     
    srandomdev
    
     
    initstate
    
     
    setstate
    
     - better random number generator; routines for changing generators
    
     
    

    LIBRARY

    Lb libc
    
     
    

    SYNOPSIS

       #include <stdlib.h>
    long random (void);
    void srandom (unsigned long seed);
    void srandomdev (void);
    char * initstate (unsigned long seed char *state long n);
    char * setstate (char *state);
     

    DESCRIPTION

    The random ();
    function uses a non-linear additive feedback random number generator employing a default table of size 31 long integers to return successive pseudo-random numbers in the range from 0 to (2**31)-1. The period of this random number generator is very large, approximately 16*((2**31)-1).

    The random ();
    and srandom ();
    functions have (almost) the same calling sequence and initialization properties as the rand(3) and srand(3) functions. The difference is that rand(3) produces a much less random sequence --- in fact, the low dozen bits generated by rand go through a cyclic pattern. All the bits generated by random ();
    are usable. For example, `random()&01 ' will produce a random binary value.

    Like rand(3), random ();
    will by default produce a sequence of numbers that can be duplicated by calling srandom ();
    with `1' as the seed.

    The srandomdev ();
    routine initializes a state array using the random(4) random number device which returns good random numbers, suitable for cryptographic use. Note that this particular seeding procedure can generate states which are impossible to reproduce by calling srandom ();
    with any value, since the succeeding terms in the state buffer are no longer derived from the LC algorithm applied to a fixed seed.

    The initstate ();
    routine allows a state array, passed in as an argument, to be initialized for future use. The size of the state array (in bytes) is used by initstate ();
    to decide how sophisticated a random number generator it should use --- the more state, the better the random numbers will be. (Current "optimal" values for the amount of state information are 8, 32, 64, 128, and 256 bytes; other amounts will be rounded down to the nearest known amount. Using less than 8 bytes will cause an error.) The seed for the initialization (which specifies a starting point for the random number sequence, and provides for restarting at the same point) is also an argument. The initstate ();
    function returns a pointer to the previous state information array.

    Once a state has been initialized, the setstate ();
    routine provides for rapid switching between states. The setstate ();
    function returns a pointer to the previous state array; its argument state array is used for further random number generation until the next call to initstate ();
    or setstate (.);

    Once a state array has been initialized, it may be restarted at a different point either by calling initstate ();
    (with the desired seed, the state array, and its size) or by calling both setstate ();
    (with the state array) and srandom ();
    (with the desired seed). The advantage of calling both setstate ();
    and srandom ();
    is that the size of the state array does not have to be remembered after it is initialized.

    With 256 bytes of state information, the period of the random number generator is greater than 2**69 which should be sufficient for most purposes.  

    DIAGNOSTICS

    If initstate ();
    is called with less than 8 bytes of state information, or if setstate ();
    detects that the state information has been garbled, error messages are printed on the standard error output.  

    SEE ALSO

    arc4random(3), rand(3), srand(3), random(4)  

    HISTORY

    These functions appeared in BSD 4.2  

    AUTHORS

    An Earl T. Cohen  

    BUGS

    About 2/3 the speed of rand(3).

    The historical implementation used to have a very weak seeding; the random sequence did not vary much with the seed. The current implementation employs a better pseudo-random number generator for the initial state calculation.

    Applications requiring cryptographic quality randomness should use arc4random(3).


     

    Index

    NAME
    LIBRARY
    SYNOPSIS
    DESCRIPTION
    DIAGNOSTICS
    SEE ALSO
    HISTORY
    AUTHORS
    BUGS


    Поиск по тексту MAN-ов: 




    Спонсоры:
    PostgresPro
    Inferno Solutions
    Hosting by Hoster.ru
    Хостинг:

    Закладки на сайте
    Проследить за страницей
    Created 1996-2022 by Maxim Chirkov
    Добавить, Поддержать, Вебмастеру