The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 ТемаНаборКатегория 
 
 [Cписок руководств | Печать]

Getopt::Long (3)
  • >> Getopt::Long (3) ( Разные man: Библиотечные вызовы )
  •  

    NAME

    Getopt::Long - Extended processing of command line options
     
    

    SYNOPSIS

      use Getopt::Long;
      my $data   = "file.dat";
      my $length = 24;
      my $verbose;
      $result = GetOptions ("length=i" => \$length,    # numeric
                            "file=s"   => \$data,      # string
                            "verbose"  => \$verbose);  # flag
    
    
     

    DESCRIPTION

    The Getopt::Long module implements an extended getopt function called GetOptions(). This function adheres to the POSIX syntax for command line options, with GNU extensions. In general, this means that options have long names instead of single letters, and are introduced with a double dash ``--''. Support for bundling of command line options, as was the case with the more traditional single-letter approach, is provided but not enabled by default.  

    Command Line Options, an Introduction

    Command line operated programs traditionally take their arguments from the command line, for example filenames or other information that the program needs to know. Besides arguments, these programs often take command line options as well. Options are not necessary for the program to work, hence the name 'option', but are used to modify its default behaviour. For example, a program could do its job quietly, but with a suitable option it could provide verbose information about what it did.

    Command line options come in several flavours. Historically, they are preceded by a single dash "-", and consist of a single letter.

        -l -a -c
    
    

    Usually, these single-character options can be bundled:

        -lac
    
    

    Options can have values, the value is placed after the option character. Sometimes with whitespace in between, sometimes not:

        -s 24 -s24
    
    

    Due to the very cryptic nature of these options, another style was developed that used long names. So instead of a cryptic "-l" one could use the more descriptive "--long". To distinguish between a bundle of single-character options and a long one, two dashes are used to precede the option name. Early implementations of long options used a plus "+" instead. Also, option values could be specified either like

        --size=24
    
    

    or

        --size 24
    
    

    The "+" form is now obsolete and strongly deprecated.  

    Getting Started with Getopt::Long

    Getopt::Long is the Perl5 successor of "newgetopt.pl". This was the first Perl module that provided support for handling the new style of command line options, hence the name Getopt::Long. This module also supports single-character options and bundling. Single character options may be any alphabetic character, a question mark, and a dash. Long options may consist of a series of letters, digits, and dashes. Although this is currently not enforced by Getopt::Long, multiple consecutive dashes are not allowed, and the option name must not end with a dash.

    To use Getopt::Long from a Perl program, you must include the following line in your Perl program:

        use Getopt::Long;
    
    

    This will load the core of the Getopt::Long module and prepare your program for using it. Most of the actual Getopt::Long code is not loaded until you really call one of its functions.

    In the default configuration, options names may be abbreviated to uniqueness, case does not matter, and a single dash is sufficient, even for long option names. Also, options may be placed between non-option arguments. See ``Configuring Getopt::Long'' for more details on how to configure Getopt::Long.  

    Simple options

    The most simple options are the ones that take no values. Their mere presence on the command line enables the option. Popular examples are:

        --all --verbose --quiet --debug
    
    

    Handling simple options is straightforward:

        my $verbose = '';   # option variable with default value (false)
        my $all = '';       # option variable with default value (false)
        GetOptions ('verbose' => \$verbose, 'all' => \$all);
    
    

    The call to GetOptions() parses the command line arguments that are present in @ARGV and sets the option variable to the value 1 if the option did occur on the command line. Otherwise, the option variable is not touched. Setting the option value to true is often called enabling the option.

    The option name as specified to the GetOptions() function is called the option specification. Later we'll see that this specification can contain more than just the option name. The reference to the variable is called the option destination.

    GetOptions() will return a true value if the command line could be processed successfully. Otherwise, it will write error messages to STDERR, and return a false result.  

    A little bit less simple options

    Getopt::Long supports two useful variants of simple options: negatable options and incremental options.

    A negatable option is specified with an exclamation mark "!" after the option name:

        my $verbose = '';   # option variable with default value (false)
        GetOptions ('verbose!' => \$verbose);
    
    

    Now, using "--verbose" on the command line will enable $verbose, as expected. But it is also allowed to use "--noverbose", which will disable $verbose by setting its value to 0. Using a suitable default value, the program can find out whether $verbose is false by default, or disabled by using "--noverbose".

    An incremental option is specified with a plus "+" after the option name:

        my $verbose = '';   # option variable with default value (false)
        GetOptions ('verbose+' => \$verbose);
    
    

    Using "--verbose" on the command line will increment the value of $verbose. This way the program can keep track of how many times the option occurred on the command line. For example, each occurrence of "--verbose" could increase the verbosity level of the program.  

    Mixing command line option with other arguments

    Usually programs take command line options as well as other arguments, for example, file names. It is good practice to always specify the options first, and the other arguments last. Getopt::Long will, however, allow the options and arguments to be mixed and 'filter out' all the options before passing the rest of the arguments to the program. To stop Getopt::Long from processing further arguments, insert a double dash "--" on the command line:

        --size 24 -- --all
    
    

    In this example, "--all" will not be treated as an option, but passed to the program unharmed, in @ARGV.  

    Options with values

    For options that take values it must be specified whether the option value is required or not, and what kind of value the option expects.

    Three kinds of values are supported: integer numbers, floating point numbers, and strings.

    If the option value is required, Getopt::Long will take the command line argument that follows the option and assign this to the option variable. If, however, the option value is specified as optional, this will only be done if that value does not look like a valid command line option itself.

        my $tag = '';       # option variable with default value
        GetOptions ('tag=s' => \$tag);
    
    

    In the option specification, the option name is followed by an equals sign "=" and the letter "s". The equals sign indicates that this option requires a value. The letter "s" indicates that this value is an arbitrary string. Other possible value types are "i" for integer values, and "f" for floating point values. Using a colon ":" instead of the equals sign indicates that the option value is optional. In this case, if no suitable value is supplied, string valued options get an empty string '' assigned, while numeric options are set to 0.  

    Options with multiple values

    Options sometimes take several values. For example, a program could use multiple directories to search for library files:

        --library lib/stdlib --library lib/extlib
    
    

    To accomplish this behaviour, simply specify an array reference as the destination for the option:

        GetOptions ("library=s" => \@libfiles);
    
    

    Alternatively, you can specify that the option can have multiple values by adding a ``@'', and pass a scalar reference as the destination:

        GetOptions ("library=s@" => \$libfiles);
    
    

    Used with the example above, @libfiles (or @$libfiles) would contain two strings upon completion: "lib/srdlib" and "lib/extlib", in that order. It is also possible to specify that only integer or floating point numbers are acceptable values.

    Often it is useful to allow comma-separated lists of values as well as multiple occurrences of the options. This is easy using Perl's split() and join() operators:

        GetOptions ("library=s" => \@libfiles);
        @libfiles = split(/,/,join(',',@libfiles));
    
    

    Of course, it is important to choose the right separator string for each purpose.

    Warning: What follows is an experimental feature.

    Options can take multiple values at once, for example

        --coordinates 52.2 16.4 --rgbcolor 255 255 149
    
    

    This can be accomplished by adding a repeat specifier to the option specification. Repeat specifiers are very similar to the "{...}" repeat specifiers that can be used with regular expression patterns. For example, the above command line would be handled as follows:

        GetOptions('coordinates=f{2}' => \@coor, 'rgbcolor=i{3}' => \@color);
    
    

    The destination for the option must be an array or array reference.

    It is also possible to specify the minimal and maximal number of arguments an option takes. "foo=s{2,4}" indicates an option that takes at least two and at most 4 arguments. "foo=s{,}" indicates one or more values; "foo:s{,}" indicates zero or more option values.  

    Options with hash values

    If the option destination is a reference to a hash, the option will take, as value, strings of the form key"="value. The value will be stored with the specified key in the hash.

        GetOptions ("define=s" => \%defines);
    
    

    Alternatively you can use:

        GetOptions ("define=s%" => \$defines);
    
    

    When used with command line options:

        --define os=linux --define vendor=redhat
    
    

    the hash %defines (or %$defines) will contain two keys, "os" with value ""linux" and "vendor" with value "redhat". It is also possible to specify that only integer or floating point numbers are acceptable values. The keys are always taken to be strings.  

    User-defined subroutines to handle options

    Ultimate control over what should be done when (actually: each time) an option is encountered on the command line can be achieved by designating a reference to a subroutine (or an anonymous subroutine) as the option destination. When GetOptions() encounters the option, it will call the subroutine with two or three arguments. The first argument is the name of the option. For a scalar or array destination, the second argument is the value to be stored. For a hash destination, the second arguments is the key to the hash, and the third argument the value to be stored. It is up to the subroutine to store the value, or do whatever it thinks is appropriate.

    A trivial application of this mechanism is to implement options that are related to each other. For example:

        my $verbose = '';   # option variable with default value (false)
        GetOptions ('verbose' => \$verbose,
                    'quiet'   => sub { $verbose = 0 });
    
    

    Here "--verbose" and "--quiet" control the same variable $verbose, but with opposite values.

    If the subroutine needs to signal an error, it should call die() with the desired error message as its argument. GetOptions() will catch the die(), issue the error message, and record that an error result must be returned upon completion.

    If the text of the error message starts with an exclamation mark "!" it is interpreted specially by GetOptions(). There is currently one special command implemented: "die("!FINISH")" will cause GetOptions() to stop processing options, as if it encountered a double dash "--".  

    Options with multiple names

    Often it is user friendly to supply alternate mnemonic names for options. For example "--height" could be an alternate name for "--length". Alternate names can be included in the option specification, separated by vertical bar "|" characters. To implement the above example:

        GetOptions ('length|height=f' => \$length);
    
    

    The first name is called the primary name, the other names are called aliases. When using a hash to store options, the key will always be the primary name.

    Multiple alternate names are possible.  

    Case and abbreviations

    Without additional configuration, GetOptions() will ignore the case of option names, and allow the options to be abbreviated to uniqueness.

        GetOptions ('length|height=f' => \$length, "head" => \$head);
    
    

    This call will allow "--l" and "--L" for the length option, but requires a least "--hea" and "--hei" for the head and height options.  

    Summary of Option Specifications

    Each option specifier consists of two parts: the name specification and the argument specification.

    The name specification contains the name of the option, optionally followed by a list of alternative names separated by vertical bar characters.

        length            option name is "length"
        length|size|l     name is "length", aliases are "size" and "l"
    
    

    The argument specification is optional. If omitted, the option is considered boolean, a value of 1 will be assigned when the option is used on the command line.

    The argument specification can be

    !
    The option does not take an argument and may be negated by prefixing it with ``no'' or ``no-''. E.g. "foo!" will allow "--foo" (a value of 1 will be assigned) as well as "--nofoo" and "--no-foo" (a value of 0 will be assigned). If the option has aliases, this applies to the aliases as well.

    Using negation on a single letter option when bundling is in effect is pointless and will result in a warning.

    +
    The option does not take an argument and will be incremented by 1 every time it appears on the command line. E.g. "more+", when used with "--more --more --more", will increment the value three times, resulting in a value of 3 (provided it was 0 or undefined at first).

    The "+" specifier is ignored if the option destination is not a scalar.

    = type [ desttype ] [ repeat ]
    The option requires an argument of the given type. Supported types are:
    s
    String. An arbitrary sequence of characters. It is valid for the argument to start with "-" or "--".
    i
    Integer. An optional leading plus or minus sign, followed by a sequence of digits.
    o
    Extended integer, Perl style. This can be either an optional leading plus or minus sign, followed by a sequence of digits, or an octal string (a zero, optionally followed by '0', '1', .. '7'), or a hexadecimal string ("0x" followed by '0' .. '9', 'a' .. 'f', case insensitive), or a binary string ("0b" followed by a series of '0' and '1').
    f
    Real number. For example 3.14, "-6.23E24" and so on.

    The desttype can be "@" or "%" to specify that the option is list or a hash valued. This is only needed when the destination for the option value is not otherwise specified. It should be omitted when not needed.

    The repeat specifies the number of values this option takes per occurrence on the command line. It has the format "{" [ min ] [ "," [ max ] ] "}".

    min denotes the minimal number of arguments. It defaults to 1 for options with "=" and to 0 for options with ":", see below. Note that min overrules the "=" / ":" semantics.

    max denotes the maximum number of arguments. It must be at least min. If max is omitted, but the comma is not, there is no upper bound to the number of argument values taken.

    : type [ desttype ]
    Like "=", but designates the argument as optional. If omitted, an empty string will be assigned to string values options, and the value zero to numeric options.

    Note that if a string argument starts with "-" or "--", it will be considered an option on itself.

    : number [ desttype ]
    Like ":i", but if the value is omitted, the number will be assigned.
    : + [ desttype ]
    Like ":i", but if the value is omitted, the current value for the option will be incremented.
     

    Advanced Possibilities

     

    Object oriented interface

    Getopt::Long can be used in an object oriented way as well:

        use Getopt::Long;
        $p = new Getopt::Long::Parser;
        $p->configure(...configuration options...);
        if ($p->getoptions(...options descriptions...)) ...
    
    

    Configuration options can be passed to the constructor:

        $p = new Getopt::Long::Parser
                 config => [...configuration options...];
    
    
     

    Thread Safety

    Getopt::Long is thread safe when using ithreads as of Perl 5.8. It is not thread safe when using the older (experimental and now obsolete) threads implementation that was added to Perl 5.005.  

    Documentation and help texts

    Getopt::Long encourages the use of Pod::Usage to produce help messages. For example:

        use Getopt::Long;
        use Pod::Usage;
    
    

        my $man = 0;
        my $help = 0;
    
    

        GetOptions('help|?' => \$help, man => \$man) or pod2usage(2);
        pod2usage(1) if $help;
        pod2usage(-exitstatus => 0, -verbose => 2) if $man;
    
    

        __END__
    
    

        =head1 NAME
    
    

        sample - Using Getopt::Long and Pod::Usage
    
    

        =head1 SYNOPSIS
    
    

        sample [options] [file ...]
    
    

         Options:
           -help            brief help message
           -man             full documentation
    
    

        =head1 OPTIONS
    
    

        =over 8
    
    

        =item B<-help>
    
    

        Print a brief help message and exits.
    
    

        =item B<-man>
    
    

        Prints the manual page and exits.
    
    

        =back
    
    

        =head1 DESCRIPTION
    
    

        B<This program> will read the given input file(s) and do something
        useful with the contents thereof.
    
    

        =cut
    
    

    See Pod::Usage for details.  

    Storing option values in a hash

    Sometimes, for example when there are a lot of options, having a separate variable for each of them can be cumbersome. GetOptions() supports, as an alternative mechanism, storing options in a hash.

    To obtain this, a reference to a hash must be passed as the first argument to GetOptions(). For each option that is specified on the command line, the option value will be stored in the hash with the option name as key. Options that are not actually used on the command line will not be put in the hash, on other words, "exists($h{option})" (or defined()) can be used to test if an option was used. The drawback is that warnings will be issued if the program runs under "use strict" and uses $h{option} without testing with exists() or defined() first.

        my %h = ();
        GetOptions (\%h, 'length=i');       # will store in $h{length}
    
    

    For options that take list or hash values, it is necessary to indicate this by appending an "@" or "%" sign after the type:

        GetOptions (\%h, 'colours=s@');     # will push to @{$h{colours}}
    
    

    To make things more complicated, the hash may contain references to the actual destinations, for example:

        my $len = 0;
        my %h = ('length' => \$len);
        GetOptions (\%h, 'length=i');       # will store in $len
    
    

    This example is fully equivalent with:

        my $len = 0;
        GetOptions ('length=i' => \$len);   # will store in $len
    
    

    Any mixture is possible. For example, the most frequently used options could be stored in variables while all other options get stored in the hash:

        my $verbose = 0;                    # frequently referred
        my $debug = 0;                      # frequently referred
        my %h = ('verbose' => \$verbose, 'debug' => \$debug);
        GetOptions (\%h, 'verbose', 'debug', 'filter', 'size=i');
        if ( $verbose ) { ... }
        if ( exists $h{filter} ) { ... option 'filter' was specified ... }
    
    
     

    Bundling

    With bundling it is possible to set several single-character options at once. For example if "a", "v" and "x" are all valid options,

        -vax
    
    

    would set all three.

    Getopt::Long supports two levels of bundling. To enable bundling, a call to Getopt::Long::Configure is required.

    The first level of bundling can be enabled with:

        Getopt::Long::Configure ("bundling");
    
    

    Configured this way, single-character options can be bundled but long options must always start with a double dash "--" to avoid ambiguity. For example, when "vax", "a", "v" and "x" are all valid options,

        -vax
    
    

    would set "a", "v" and "x", but

        --vax
    
    

    would set "vax".

    The second level of bundling lifts this restriction. It can be enabled with:

        Getopt::Long::Configure ("bundling_override");
    
    

    Now, "-vax" would set the option "vax".

    When any level of bundling is enabled, option values may be inserted in the bundle. For example:

        -h24w80
    
    

    is equivalent to

        -h 24 -w 80
    
    

    When configured for bundling, single-character options are matched case sensitive while long options are matched case insensitive. To have the single-character options matched case insensitive as well, use:

        Getopt::Long::Configure ("bundling", "ignorecase_always");
    
    

    It goes without saying that bundling can be quite confusing.  

    The lonesome dash

    Normally, a lone dash "-" on the command line will not be considered an option. Option processing will terminate (unless ``permute'' is configured) and the dash will be left in @ARGV.

    It is possible to get special treatment for a lone dash. This can be achieved by adding an option specification with an empty name, for example:

        GetOptions ('' => \$stdio);
    
    

    A lone dash on the command line will now be a legal option, and using it will set variable $stdio.  

    Argument callback

    A special option 'name' "<>" can be used to designate a subroutine to handle non-option arguments. When GetOptions() encounters an argument that does not look like an option, it will immediately call this subroutine and passes it one parameter: the argument name.

    For example:

        my $width = 80;
        sub process { ... }
        GetOptions ('width=i' => \$width, '<>' => \&process);
    
    

    When applied to the following command line:

        arg1 --width=72 arg2 --width=60 arg3
    
    

    This will call "process("arg1")" while $width is 80, "process("arg2")" while $width is 72, and "process("arg3")" while $width is 60.

    This feature requires configuration option permute, see section ``Configuring Getopt::Long''.  

    Configuring Getopt::Long

    Getopt::Long can be configured by calling subroutine Getopt::Long::Configure(). This subroutine takes a list of quoted strings, each specifying a configuration option to be enabled, e.g. "ignore_case", or disabled, e.g. "no_ignore_case". Case does not matter. Multiple calls to Configure() are possible.

    Alternatively, as of version 2.24, the configuration options may be passed together with the "use" statement:

        use Getopt::Long qw(:config no_ignore_case bundling);
    
    

    The following options are available:

    default
    This option causes all configuration options to be reset to their default values.
    posix_default
    This option causes all configuration options to be reset to their default values as if the environment variable POSIXLY_CORRECT had been set.
    auto_abbrev
    Allow option names to be abbreviated to uniqueness. Default is enabled unless environment variable POSIXLY_CORRECT has been set, in which case "auto_abbrev" is disabled.
    getopt_compat
    Allow "+" to start options. Default is enabled unless environment variable POSIXLY_CORRECT has been set, in which case "getopt_compat" is disabled.
    gnu_compat
    "gnu_compat" controls whether "--opt=" is allowed, and what it should do. Without "gnu_compat", "--opt=" gives an error. With "gnu_compat", "--opt=" will give option "opt" and empty value. This is the way GNU getopt_long() does it.
    gnu_getopt
    This is a short way of setting "gnu_compat" "bundling" "permute" "no_getopt_compat". With "gnu_getopt", command line handling should be fully compatible with GNU getopt_long().
    require_order
    Whether command line arguments are allowed to be mixed with options. Default is disabled unless environment variable POSIXLY_CORRECT has been set, in which case "require_order" is enabled.

    See also "permute", which is the opposite of "require_order".

    permute
    Whether command line arguments are allowed to be mixed with options. Default is enabled unless environment variable POSIXLY_CORRECT has been set, in which case "permute" is disabled. Note that "permute" is the opposite of "require_order".

    If "permute" is enabled, this means that

        --foo arg1 --bar arg2 arg3
    
    

    is equivalent to

        --foo --bar arg1 arg2 arg3
    
    

    If an argument callback routine is specified, @ARGV will always be empty upon successful return of GetOptions() since all options have been processed. The only exception is when "--" is used:

        --foo arg1 --bar arg2 -- arg3
    
    

    This will call the callback routine for arg1 and arg2, and then terminate GetOptions() leaving "arg2" in @ARGV.

    If "require_order" is enabled, options processing terminates when the first non-option is encountered.

        --foo arg1 --bar arg2 arg3
    
    

    is equivalent to

        --foo -- arg1 --bar arg2 arg3
    
    

    If "pass_through" is also enabled, options processing will terminate at the first unrecognized option, or non-option, whichever comes first.

    bundling (default: disabled)
    Enabling this option will allow single-character options to be bundled. To distinguish bundles from long option names, long options must be introduced with "--" and bundles with "-".

    Note that, if you have options "a", "l" and "all", and auto_abbrev enabled, possible arguments and option settings are:

        using argument               sets option(s)
        ------------------------------------------
        -a, --a                      a
        -l, --l                      l
        -al, -la, -ala, -all,...     a, l
        --al, --all                  all
    
    

    The surprising part is that "--a" sets option "a" (due to auto completion), not "all".

    Note: disabling "bundling" also disables "bundling_override".

    bundling_override (default: disabled)
    If "bundling_override" is enabled, bundling is enabled as with "bundling" but now long option names override option bundles.

    Note: disabling "bundling_override" also disables "bundling".

    Note: Using option bundling can easily lead to unexpected results, especially when mixing long options and bundles. Caveat emptor.

    ignore_case (default: enabled)
    If enabled, case is ignored when matching long option names. If, however, bundling is enabled as well, single character options will be treated case-sensitive.

    With "ignore_case", option specifications for options that only differ in case, e.g., "foo" and "Foo", will be flagged as duplicates.

    Note: disabling "ignore_case" also disables "ignore_case_always".

    ignore_case_always (default: disabled)
    When bundling is in effect, case is ignored on single-character options also.

    Note: disabling "ignore_case_always" also disables "ignore_case".

    auto_version (default:disabled)
    Automatically provide support for the --version option if the application did not specify a handler for this option itself.

    Getopt::Long will provide a standard version message that includes the program name, its version (if $main::VERSION is defined), and the versions of Getopt::Long and Perl. The message will be written to standard output and processing will terminate.

    "auto_version" will be enabled if the calling program explicitly specified a version number higher than 2.32 in the "use" or "require" statement.

    auto_help (default:disabled)
    Automatically provide support for the --help and -? options if the application did not specify a handler for this option itself.

    Getopt::Long will provide a help message using module Pod::Usage. The message, derived from the SYNOPSIS POD section, will be written to standard output and processing will terminate.

    "auto_help" will be enabled if the calling program explicitly specified a version number higher than 2.32 in the "use" or "require" statement.

    pass_through (default: disabled)
    Options that are unknown, ambiguous or supplied with an invalid option value are passed through in @ARGV instead of being flagged as errors. This makes it possible to write wrapper scripts that process only part of the user supplied command line arguments, and pass the remaining options to some other program.

    If "require_order" is enabled, options processing will terminate at the first unrecognized option, or non-option, whichever comes first. However, if "permute" is enabled instead, results can become confusing.

    Note that the options terminator (default "--"), if present, will also be passed through in @ARGV.

    prefix
    The string that starts options. If a constant string is not sufficient, see "prefix_pattern".
    prefix_pattern
    A Perl pattern that identifies the strings that introduce options. Default is "--|-|\+" unless environment variable POSIXLY_CORRECT has been set, in which case it is "--|-".
    long_prefix_pattern
    A Perl pattern that allows the disambiguation of long and short prefixes. Default is "--".

    Typically you only need to set this if you are using nonstandard prefixes and want some or all of them to have the same semantics as '--' does under normal circumstances.

    For example, setting prefix_pattern to "--|-|\+|\/" and long_prefix_pattern to "--|\/" would add Win32 style argument handling.

    debug (default: disabled)
    Enable debugging output.
     

    Exportable Methods

    VersionMessage
    This subroutine provides a standard version message. Its argument can be:
    *
    A string containing the text of a message to print before printing the standard message.
    *
    A numeric value corresponding to the desired exit status.
    *
    A reference to a hash.

    If more than one argument is given then the entire argument list is assumed to be a hash. If a hash is supplied (either as a reference or as a list) it should contain one or more elements with the following keys:

    -message
    -msg
    The text of a message to print immediately prior to printing the program's usage message.
    -exitval
    The desired exit status to pass to the exit() function. This should be an integer, or else the string ``NOEXIT'' to indicate that control should simply be returned without terminating the invoking process.
    -output
    A reference to a filehandle, or the pathname of a file to which the usage message should be written. The default is "\*STDERR" unless the exit value is less than 2 (in which case the default is "\*STDOUT").

    You cannot tie this routine directly to an option, e.g.:

        GetOptions("version" => \&VersionMessage);
    
    

    Use this instead:

        GetOptions("version" => sub { VersionMessage() });
    
    
    HelpMessage
    This subroutine produces a standard help message, derived from the program's POD section SYNOPSIS using Pod::Usage. It takes the same arguments as VersionMessage(). In particular, you cannot tie it directly to an option, e.g.:

        GetOptions("help" => \&HelpMessage);
    
    

    Use this instead:

        GetOptions("help" => sub { HelpMessage() });
    
    
     

    Return values and Errors

    Configuration errors and errors in the option definitions are signalled using die() and will terminate the calling program unless the call to Getopt::Long::GetOptions() was embedded in "eval { ... }", or die() was trapped using $SIG{__DIE__}.

    GetOptions returns true to indicate success. It returns false when the function detected one or more errors during option parsing. These errors are signalled using warn() and can be trapped with $SIG{__WARN__}.  

    Legacy

    The earliest development of "newgetopt.pl" started in 1990, with Perl version 4. As a result, its development, and the development of Getopt::Long, has gone through several stages. Since backward compatibility has always been extremely important, the current version of Getopt::Long still supports a lot of constructs that nowadays are no longer necessary or otherwise unwanted. This section describes briefly some of these 'features'.  

    Default destinations

    When no destination is specified for an option, GetOptions will store the resultant value in a global variable named "opt_"XXX, where XXX is the primary name of this option. When a progam executes under "use strict" (recommended), these variables must be pre-declared with our() or "use vars".

        our $opt_length = 0;
        GetOptions ('length=i');    # will store in $opt_length
    
    

    To yield a usable Perl variable, characters that are not part of the syntax for variables are translated to underscores. For example, "--fpp-struct-return" will set the variable $opt_fpp_struct_return. Note that this variable resides in the namespace of the calling program, not necessarily "main". For example:

        GetOptions ("size=i", "sizes=i@");
    
    

    with command line ``-size 10 -sizes 24 -sizes 48'' will perform the equivalent of the assignments

        $opt_size = 10;
        @opt_sizes = (24, 48);
    
    
     

    Alternative option starters

    A string of alternative option starter characters may be passed as the first argument (or the first argument after a leading hash reference argument).

        my $len = 0;
        GetOptions ('/', 'length=i' => $len);
    
    

    Now the command line may look like:

        /length 24 -- arg
    
    

    Note that to terminate options processing still requires a double dash "--".

    GetOptions() will not interpret a leading "<>" as option starters if the next argument is a reference. To force "<" and ">" as option starters, use "><". Confusing? Well, using a starter argument is strongly deprecated anyway.  

    Configuration variables

    Previous versions of Getopt::Long used variables for the purpose of configuring. Although manipulating these variables still work, it is strongly encouraged to use the "Configure" routine that was introduced in version 2.17. Besides, it is much easier.  

    Trouble Shooting

     

    GetOptions does not return a false result when an option is not supplied

    That's why they're called 'options'.  

    GetOptions does not split the command line correctly

    The command line is not split by GetOptions, but by the command line interpreter (CLI). On Unix, this is the shell. On Windows, it is COMMAND.COM or CMD.EXE. Other operating systems have other CLIs.

    It is important to know that these CLIs may behave different when the command line contains special characters, in particular quotes or backslashes. For example, with Unix shells you can use single quotes ("'") and double quotes (""") to group words together. The following alternatives are equivalent on Unix:

        "two words"
        'two words'
        two\ words
    
    

    In case of doubt, insert the following statement in front of your Perl program:

        print STDERR (join("|",@ARGV),"\n");
    
    

    to verify how your CLI passes the arguments to the program.  

    Undefined subroutine &main::GetOptions called

    Are you running Windows, and did you write

        use GetOpt::Long;
    
    

    (note the capital 'O')?  

    How do I put a -? option into a Getopt::Long?

    You can only obtain this using an alias, and Getopt::Long of at least version 2.13.

        use Getopt::Long;
        GetOptions ("help|?");    # -help and -? will both set $opt_help
    
    
     

    AUTHOR

    Johan Vromans <jvromans@squirrel.nl>  

    COPYRIGHT AND DISCLAIMER

    This program is Copyright 1990,2005 by Johan Vromans. This program is free software; you can redistribute it and/or modify it under the terms of the Perl Artistic License or the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.

    This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.

    If you do not have a copy of the GNU General Public License write to the Free Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.


     

    Index

    NAME
    SYNOPSIS
    DESCRIPTION
    Command Line Options, an Introduction
    Getting Started with Getopt::Long
    Simple options
    A little bit less simple options
    Mixing command line option with other arguments
    Options with values
    Options with multiple values
    Options with hash values
    User-defined subroutines to handle options
    Options with multiple names
    Case and abbreviations
    Summary of Option Specifications
    Advanced Possibilities
    Object oriented interface
    Thread Safety
    Documentation and help texts
    Storing option values in a hash
    Bundling
    The lonesome dash
    Argument callback
    Configuring Getopt::Long
    Exportable Methods
    Return values and Errors
    Legacy
    Default destinations
    Alternative option starters
    Configuration variables
    Trouble Shooting
    GetOptions does not return a false result when an option is not supplied
    GetOptions does not split the command line correctly
    Undefined subroutine &main::GetOptions called
    How do I put a -? option into a Getopt::Long?
    AUTHOR
    COPYRIGHT AND DISCLAIMER


    Поиск по тексту MAN-ов: 




    Партнёры:
    PostgresPro
    Inferno Solutions
    Hosting by Hoster.ru
    Хостинг:

    Закладки на сайте
    Проследить за страницей
    Created 1996-2024 by Maxim Chirkov
    Добавить, Поддержать, Вебмастеру