Author: Takashi Iwai <tiwai@suse.de>
Date: Thu Aug 6 12:04:31 2026 +0200
ALSA: dummy: Check card index validity at probe
commit 02442d5fe8ee365a084b055d4fa81a0c1abfc3fd upstream.
snd_dummy_probe() blindly trusts that the given devptr->id value is
within the proper card index range. It's OK for the devices the
driver itself creates at the module probe time, but if the device is
bound manually via sysfs interface, this could be -1 as "none", and
this leads to OOB access for index[] and other parameters.
Add a sanity check for the card index and warn/correct it if it's a
value out of the range.
Reported-by: syzbot+2fb5d1f7cc4c1f132bcc@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/6a73bd4d.01d0871a.3a0d52.0005.GAE@google.com
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20260806100433.1287393-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Geoffrey D. Bennett <g@b4.vu>
Date: Mon Aug 10 03:36:01 2026 +0930
ALSA: FCP: Use a private URB for the notification endpoint
commit 918b8d231c571c50a00efe92ffc8404a537a0490 upstream.
fcp_init_notify() used mixer->urb, which snd_usb_mixer_status_create()
allocates for the optional UAC2 status interrupt endpoint and mixer.c
kills, resubmits and frees. On a device with that endpoint,
fcp_init_notify()'s "already set up" early return fires on the status
URB and returns success without doing anything. No FCP notification
URB is submitted, and cmd_done is left zeroed because it is
initialised past that early return and nowhere else. fcp_init() then
issues init1_opcode and wait_for_completion_timeout() would crash
adding to the zeroed wait.head. fcp_cleanup_urb() would also kill and
free mixer.c's status URB.
Use a separate URB in fcp_data, and initialise cmd_done in
fcp_init_private() where fcp_data is allocated. fcp_init_notify() is
reached again after suspend via fcp_reinit(), and the URB kill path in
fcp_notify() completes cmd_done, leaving a stale count that would
satisfy the next command's wait before the device ACKs. Use
reinit_completion() to clear it.
Fixes: 46757a3e7d50 ("ALSA: FCP: Add Focusrite Control Protocol driver")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-5
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/2cad281e6434024ca48a9ecc94fa19d6777e9be7.1786290885.git.g@b4.vu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Geoffrey D. Bennett <g@b4.vu>
Date: Mon Aug 10 03:36:11 2026 +0930
ALSA: scarlett2: Use a private URB for the notification endpoint
commit cd17d6ff7b7d2b1dd9bcc80ae7b4a83773f918c6 upstream.
scarlett2_init_notify() used mixer->urb, which
snd_usb_mixer_status_create() allocates for the UAC2 status interrupt
endpoint and mixer.c manages. On a device with that endpoint, the
"already in use" check fires on the status URB and returns 0 for
success without doing anything. No notification URB is submitted, and
cmd_done is left zeroed because it is initialised past that check and
nowhere else. scarlett2_usb_init() then issues SCARLETT2_USB_INIT_1
and wait_for_completion_timeout() would crash adding to the zeroed
wait.head.
Use a separate URB in scarlett2_data, as done for FCP, and initialise
cmd_done in scarlett2_init_private(). mixer.c was also freeing the URB
in snd_usb_mixer_free() and resubmitting it in
snd_usb_mixer_activate(), so scarlett2 must now do both: add
scarlett2_cleanup_urb(), called from private_free and private_suspend,
and a private_resume callback to re-establish the URB after resume.
scarlett2_init_notify() is reached from there, and the URB kill path
in scarlett2_notify() completes cmd_done, leaving a stale count that
would satisfy the next command's wait before the device ACKs. Use
reinit_completion() to clear it.
Also free the URB if the transfer buffer allocation fails, and both if
usb_submit_urb() fails. Move scarlett2_init_notify() up next to
scarlett2_cleanup_urb() so scarlett2_init_private() can reference it
without a forward declaration.
Fixes: 1b65088958ca ("ALSA: scarlett2: Implement handling of the ACK notification")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-5
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/ffb8ba37d5d605dfdfd8576949d67098651f9349.1786290885.git.g@b4.vu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Laxman Acharya Padhya <acharyalaxman8848@gmail.com>
Date: Thu Jul 30 18:05:28 2026 +0545
Bluetooth: hci_aml: validate firmware segment lengths
commit 2bf6b9baca9372ea51b6d0f2820dc9bf29a83ef4 upstream.
aml_download_firmware() reads two lengths from the firmware header and
uses them to build pointers before checking that the header and segment
data are present. A truncated or inconsistent firmware image can make
the driver read past firmware->data while constructing TCI commands.
Reject images shorter than the header and ensure that the ICCM and DCCM
ranges fit within the loaded firmware before downloading either segment.
Fixes: 37bac77e4649 ("Bluetooth: hci_uart: Add support for Amlogic HCI UART")
Cc: stable@vger.kernel.org
Signed-off-by: Laxman Acharya Padhya <acharyalaxman8848@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Chengfeng Ye <nicoyip.dev@gmail.com>
Date: Thu Jul 30 16:32:02 2026 +0800
Bluetooth: hci_event: fix LE list UAF on reset
commit 33af47e847fe4a28b109673affb5874015d54f5a upstream.
hci_cc_reset() clears the LE accept and resolving lists without taking
hdev->lock. Other command-complete handlers serialize updates to these
lists with that lock, and the debugfs readers hold it while walking them.
This permits the reset completion and a debugfs read to interleave as
follows:
hci_rx_work debugfs reader
----------- --------------
lock hdev->lock
fetch current entry
list_del(entry)
kfree(entry)
read entry fields
The reader then dereferences a freed list entry and may follow its stale
next pointer.
KASAN reported:
BUG: KASAN: slab-use-after-free in white_list_show+0x15f/0x180
Read of size 1 at addr ffff8881015dab16 by task poc/95
Call Trace:
white_list_show+0x15f/0x180
seq_read_iter+0x3ff/0x1190
seq_read+0x267/0x3d0
vfs_read+0x177/0xa20
ksys_read+0xf7/0x1c0
Allocated by task 91:
hci_bdaddr_list_add+0x1a6/0x3a0
hci_cc_le_add_to_accept_list+0xab/0x140
hci_cmd_complete_evt+0x26c/0x9a0
hci_event_packet+0x454/0xb20
hci_rx_work+0x293/0x730
Freed by task 90:
kfree+0x131/0x3c0
hci_bdaddr_list_clear+0xd8/0x160
hci_cc_reset+0x28a/0x370
hci_cmd_complete_evt+0x26c/0x9a0
hci_event_packet+0x454/0xb20
hci_rx_work+0x293/0x730
Take hdev->lock around both list clears. This matches the existing
mutation and traversal locking convention.
Fixes: a4d5504d5c39 ("Bluetooth: Clear LE white list when resetting controller")
Fixes: cfdb0c2d095a ("Bluetooth: Store Resolv list size")
Cc: stable@vger.kernel.org
Signed-off-by: Chengfeng Ye <nicoyip.dev@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Laxman Acharya Padhya <acharyalaxman8848@gmail.com>
Date: Sat Aug 1 23:54:52 2026 +0545
Bluetooth: hci_event: validate LE Set CIG Parameters response
commit 0acd4eeb4b225b9bebbf9ef96cc10cdd79b94899 upstream.
The Command Complete dispatch validates only the fixed part of the LE Set
CIG Parameters response. After that part is pulled from the skb,
hci_cc_le_set_cig_params() trusts num_handles and reads each entry in the
trailing handle array.
Matching num_handles against the command's num_cis does not guarantee
that the response contains the advertised handles. A truncated response
from a malfunctioning controller can therefore make the handler read
beyond the skb data.
Validate that the remaining skb data contains all advertised handles.
Include this in the existing response validation so malformed responses
also follow the established CIG failure handling.
Fixes: 26afbd826ee3 ("Bluetooth: Add initial implementation of CIS connections")
Cc: stable@vger.kernel.org
Signed-off-by: Laxman Acharya Padhya <acharyalaxman8848@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Chengfeng Ye <nicoyip.dev@gmail.com>
Date: Sat Aug 1 15:05:24 2026 +0800
Bluetooth: hci_sync: Fix accept list UAF during suspend
commit f57b399c4fa1501b2d5451f52d861ece86bcf3db upstream.
hci_update_event_filter_sync() walks hdev->accept_list while sending a
synchronous HCI command for each remote-wakeup device. The suspend path
holds hdev->req_lock, but accept-list updates are serialized by hdev->lock.
Consequently, remove_device() can free the current list entry during the
controller wait.
The following interleaving causes the use-after-free:
hci_update_event_filter_sync() remove_device()
fetch accept-list entry
hci_set_event_filter_sync()
wait for controller response hci_dev_lock()
list_del()
kfree()
hci_dev_unlock()
read the freed list.next
KASAN reported:
BUG: KASAN: slab-use-after-free in hci_suspend_sync+0x835/0x910
Read of size 8 at addr ffff88810bec8440 by task kworker/0:1/10
Workqueue: events vhci_suspend_work
Call Trace:
hci_suspend_sync+0x835/0x910
hci_suspend_dev+0x182/0x450
process_one_work+0x661/0x1090
worker_thread+0x45b/0xd10
Allocated by task 86:
hci_bdaddr_list_add_with_flags+0x1a8/0x400
add_device+0x381/0x820
hci_sock_sendmsg+0x1033/0x1ea0
Freed by task 91:
kfree+0x131/0x3c0
remove_device+0x429/0xb70
hci_sock_sendmsg+0x1033/0x1ea0
Snapshot the remote-wakeup addresses under hdev->lock. Release the lock
before sending HCI commands. Clear the controller event filter before
building the snapshot, and skip allocation and the second list traversal
when there are no matching entries. This preserves the original filter
and scan-state updates without retaining an accept-list node across a
controller wait.
Fixes: 182ee45da083 ("Bluetooth: hci_sync: Rework hci_suspend_notifier")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/linux-bluetooth/20260730092331.2069741-1-nicoyip.dev@gmail.com/
Signed-off-by: Chengfeng Ye <nicoyip.dev@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Ali Ahmet Memis <ali@iusegentoo.com>
Date: Fri Aug 7 00:59:55 2026 +0000
Bluetooth: ISO: do not force BT_LISTEN after a failed BIG sync
commit 9838a80096ba472d5e03057136a112631aabae6e upstream.
iso_sock_recvmsg() handles the deferred setup of a broadcast sink by
dropping the socket lock, calling iso_conn_big_sync() and taking the
lock again:
release_sock(sk);
iso_conn_big_sync(sk);
lock_sock(sk);
sk->sk_state = BT_LISTEN;
The state is written unconditionally, but iso_conn_big_sync() returns
void and has paths that do nothing at all: hci_get_route() may fail, and
after re-acquiring the socket lock the connection may already be gone,
in which case it bails out without ever issuing an LE BIG Create Sync.
While the lock is dropped the connection can be torn down, for example
when the controller reports HCI_EV_LE_PA_SYNC_LOST:
hci_le_pa_sync_lost_evt()
hci_disconn_cfm() -> iso_disconn_cfm() -> iso_conn_del()
iso_chan_del()
iso_pi(sk)->conn = NULL
sk->sk_state = BT_CLOSED
sock_set_flag(sk, SOCK_ZAPPED)
iso_conn_big_sync() then finds conn == NULL and returns, but the caller
still overwrites the BT_CLOSED that iso_chan_del() has just set. The
socket ends up marked BT_LISTEN with no connection, so recvmsg() reports
success for a setup that never happened and a later accept() waits for
BIS connections that can never arrive instead of failing.
A concurrent shutdown() reaches the same write by another route:
__iso_sock_close() takes the BT_CONNECT2 PA sync path to
iso_sock_disconn(), which sets BT_DISCONN but leaves conn and
conn->hcon in place, so iso_conn_big_sync() succeeds and BT_LISTEN is
written over BT_DISCONN. Both the BT_CONNECT2 and the BT_CONNECTED case
write the state the same way.
Let iso_conn_big_sync() report whether the BIG sync was started, and
only move the socket to BT_LISTEN when it was and when the state has not
changed while the lock was dropped, mirroring what the BT_CONNECT case
of the same switch already does with iso_connect_cis(). Both conditions
are needed, the error alone does not cover the shutdown() race.
This corrupts the socket state machine only, it is not a memory safety
issue. KASAN and lockdep stayed quiet in all of the runs below.
Reproduced with an emulated controller over /dev/vhci on a KASAN +
PROVE_LOCKING kernel. A PA sync broadcast sink socket is driven to
BT_CONNECT2 and recvmsg() on it is raced against teardown, with a debug
delay inside the lock-dropped section to widen the window:
- HCI_EV_LE_PA_SYNC_LOST injected: 64 of 64 rounds left the socket in
BT_LISTEN with the connection gone, recvmsg() returned 0 and accept()
on that fd returned EAGAIN, which iso_sock_accept() can only do while
the socket is BT_LISTEN. With this patch, 0 of 64, recvmsg() returns
an error and accept() returns EBADFD.
- shutdown() instead of a controller event: 24 of 32 rounds wedged in
BT_LISTEN, 0 of 32 with this patch. With only the error check in
place and a short window, one round still wedged while recvmsg()
returned 0, which is the case the state re-check covers.
An unraced control round behaves the same before and after: recvmsg()
returns 0, the socket reaches BT_LISTEN and an LE BIG Create Sync is
issued.
Fixes: 7a17308c1788 ("Bluetooth: iso: Fix circular lock in iso_conn_big_sync")
Cc: stable@vger.kernel.org
Signed-off-by: Ali Ahmet Memis <ali@iusegentoo.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Ali Ahmet Memis <ali@iusegentoo.com>
Date: Thu Aug 6 23:06:21 2026 +0000
Bluetooth: ISO: zero the sockaddr before returning it in getname
commit 884cf2cc957da7ac178a0e6c6c69ddfec0481cc8 upstream.
iso_sock_getname() fills a struct sockaddr_iso in place and returns its
size without clearing it first, so bytes it does not write are copied to
user space from the kernel stack. The getsockname(2) and getpeername(2)
paths both run through do_getsockname(), which hands getname() an
uninitialized sockaddr_storage on the stack and copies back up to the
number of bytes getname() returns, so the driver has to initialize every
byte it accounts for.
Two ranges are left uninitialized:
- struct sockaddr_iso is 10 bytes but only 9 are written (family,
iso_bdaddr, iso_bdaddr_type), leaking the trailing pad byte on every
call.
- for a broadcast peer (BIS_LINK or PA_LINK) the returned length grows
by sizeof(struct sockaddr_iso_bc), but only bc_sid, bc_num_bis and
bc_bis are filled; bc_bdaddr and bc_bdaddr_type, the first 7 bytes of
that structure, are never written.
An unprivileged process can open a BTPROTO_ISO socket and reach the pad
leak with getsockname(); the broadcast leak needs an established BIS/PA
connection. l2cap and rfcomm already memset their sockaddr in getname
for the same reason; do the same here.
Fixes: ccf74f2390d6 ("Bluetooth: Add BTPROTO_ISO socket type")
Fixes: 0a766a0affb5 ("Bluetooth: ISO: Fix getpeername not returning sockaddr_iso_bc fields")
Cc: stable@vger.kernel.org
Signed-off-by: Ali Ahmet Memis <ali@iusegentoo.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Ali Ahmet Memis <ali@iusegentoo.com>
Date: Thu Aug 6 17:39:53 2026 +0000
Bluetooth: MGMT: reject HCI_CMD_SYNC params_len above 255
commit 5d95286b6d6e8f1d304da7522bfa6860fc017e48 upstream.
mgmt_hci_cmd_sync() checks that the message length agrees with params_len
but puts no upper bound on it. params_len is __le16 while the parameter
length in the HCI command header is a u8:
struct hci_command_hdr {
__le16 opcode;
__u8 plen;
} __packed;
hci_cmd_sync_alloc() assigns one to the other:
hdr->plen = plen;
if (plen)
skb_put_data(skb, param, plen);
so a params_len of 256 leaves plen at 0 while all 256 bytes are still
appended. The frame handed to the driver then declares no parameters and
carries 256 of them. On a length framed transport such as H:4 the
controller takes the trailing bytes as the start of the next packet.
The mgmt socket MTU is HCI_MAX_FRAME_SIZE, so params_len can reach about
1KB this way. Commit 03f1700b9b4d ("Bluetooth: MGMT: reject malformed
HCI_CMD_SYNC commands") only made params_len agree with the message
length, a value that fits the message but not the header field is still
accepted.
Reject params_len that does not fit the header field.
Fixes: 827af4787e74 ("Bluetooth: MGMT: Add initial implementation of MGMT_OP_HCI_CMD_SYNC")
Cc: stable@vger.kernel.org
Signed-off-by: Ali Ahmet Memis <ali@iusegentoo.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Ali Ahmet Memis <ali@iusegentoo.com>
Date: Fri Aug 7 02:03:44 2026 +0000
Bluetooth: RFCOMM: take rfcomm_mutex for the deferred setup accept
commit 43a556b2fd43f2df6dded59c2e26560a27874c24 upstream.
rfcomm_sock_recvmsg() completes a deferred setup by calling
rfcomm_dlc_accept() without holding any RFCOMM lock:
if (test_and_clear_bit(RFCOMM_DEFER_SETUP, &d->flags)) {
rfcomm_dlc_accept(d);
return 0;
}
and rfcomm_dlc_accept() dereferences the session on its first line:
struct sock *sk = d->session->sock->sk;
Every other path that touches d->session runs under rfcomm_mutex:
rfcomm_dlc_open(), rfcomm_dlc_close(), rfcomm_dlc_exists(),
rfcomm_dlc_send_rpn(), and the RFCOMM thread through
rfcomm_process_sessions(). rfcomm_connect_ind() is even documented as
"called under rfcomm_lock()". This call site is the only one that skips
it.
The RFCOMM_DEFER_SETUP bit looks like it serialises the accept against
teardown, since __rfcomm_dlc_close() returns early when it wins the
test_and_clear. But rfcomm_recv_disc() forces the state first:
d->state = BT_CLOSED;
__rfcomm_dlc_close(d, err);
and the early return only covers BT_CONNECT, BT_CONFIG, BT_OPEN and
BT_CONNECT2. With the state already BT_CLOSED that switch does not
match, the bit is never consulted, and __rfcomm_dlc_close() falls
through to rfcomm_dlc_unlink(), which sets d->session = NULL.
So a remote DISC on a deferred dlc clears the session while leaving
RFCOMM_DEFER_SETUP set. The next recvmsg() then passes the
test_and_clear and dereferences a NULL session. No timing window is
needed: once the DISC has been processed, the dereference is
unconditional.
Give rfcomm_dlc_accept() the same shape as rfcomm_dlc_open() and
rfcomm_dlc_close(): an exported wrapper that takes rfcomm_mutex and
re-checks the session, around a __rfcomm_dlc_accept() that the two
in-core callers, which already hold the mutex, keep using.
Reproduced on a KASAN + PROVE_LOCKING kernel with a BR/EDR peer emulated
over /dev/vhci: the peer brings up an ACL link, opens L2CAP on the
RFCOMM PSM, starts a session, opens a dlc on a channel bound with
BT_DEFER_SETUP, and sends DISC after the socket is accepted. recv() on
the accepted socket then hits:
Oops: general protection fault
KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
RIP: 0010:rfcomm_dlc_accept+0x54/0x350
Call Trace:
rfcomm_sock_recvmsg+0x1cd/0x230
sock_recvmsg+0x166/0x1c0
__sys_recvfrom+0x20d/0x300
0x10 is the offset of sock in struct rfcomm_session. With this patch the
same run completes with recv() returning 0 and no report, and lockdep
stays quiet, confirming rfcomm_mutex is still taken before lock_sock on
this path as it is on the thread side.
Fixes: bb23c0ab8246 ("Bluetooth: Add support for deferring RFCOMM connection setup")
Cc: stable@vger.kernel.org
Signed-off-by: Ali Ahmet Memis <ali@iusegentoo.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Griffin Kroah-Hartman <griffin@kroah.com>
Date: Mon Jul 6 16:57:06 2026 +0200
dmaengine: fsl-edma: Add error handling for devm_kasprintf
commit bf1af4dfdc017dfe989c0dbcf0e608dc95f1d2cb upstream.
Add error handling statement to fls_edma3_irq_init() for the
devm_kasprintf call.
Assisted-by: gkh_clanker_2000
Cc: stable <stable@kernel.org>
Cc: Frank Li <Frank.Li@nxp.com>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: imx@lists.linux.dev
Signed-off-by: Griffin Kroah-Hartman <griffin@kroah.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/2026070605-frying-fling-b9c5@gregkh
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jia Zhu <zhujia.zj@bytedance.com>
Date: Tue Jun 9 11:52:02 2026 +0800
ext4: avoid tail write_begin walk for uptodate folios
commit d09811183db2891776dbf0c0f1094540e29938f6 upstream.
Ext4 buffered writes into large folios also pay a full buffer_head
walk in ext4_block_write_begin(). For a small overwrite of an existing
cached folio, the folio is already uptodate and the write only needs to
prepare the buffers through the written range. Walking the suffix still
makes the write_begin cost proportional to the folio size.
Before ext4 enabled large folios for regular files, the same loop was
bounded by a single page of buffers. That commit made the existing
full-folio walk visible as a regression for cached small overwrites.
The suffix walk is needed for non-uptodate folios, where ext4 may have
to submit reads for partial blocks, preserve new-buffer cleanup, and run
error zeroing. Keep those folios on the old full walk.
For already-uptodate folios, keep the walk starting at the first buffer
rather than seeking directly to from. This preserves the existing prefix
buffer state handling. Stop once block_start reaches the end of the
write range, because the skipped suffix would only repeat the
outside-range uptodate handling for buffers beyond @to.
On current master, the libMicro ext4 large-folio overwrite test shows
the following full-series result. Results are median usecs/call over 10
runs, lower is better:
case nofix this series improvement
write_u1k 1.418 0.3405 76.0%
write_u10k 1.887 0.4175 77.9%
pwrite_u1k 1.6775 0.3390 79.8%
pwrite_u10k 1.9035 0.4130 78.3%
Fixes: 7ac67301e82f0 ("ext4: enable large folio for regular file")
Cc: stable@vger.kernel.org # v6.16+
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jia Zhu <zhujia.zj@bytedance.com>
Link: https://patch.msgid.link/20260609035202.90669-3-zhujia.zj@bytedance.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Guanghui Yang <3497809730@qq.com>
Date: Wed Jul 8 12:57:19 2026 +0000
ext4: clear error before retrying inode xattr space fallback
commit 409a7f12a0933ff2c617fa814c76cef0bd1d457a upstream.
When ext4_xattr_make_inode_space() returns -ENOSPC,
ext4_expand_extra_isize_ea() can retry the expansion with
s_min_extra_isize. If that retry succeeds by finding enough ibody free
space, control jumps directly to the shift label.
The previous -ENOSPC is still stored in error in that path, so the
function can update i_extra_isize but still return -ENOSPC to the
caller. Clear error before retrying so a successful fallback expansion
returns success.
Reproduced with an ext4 image using 1 KiB blocks, project quota support,
256-byte inodes, and min_extra_isize/want_extra_isize set to 32.
FS_IOC_FSSETXATTR failures dropped from 802 to 86 after the fix.
Fixes: 69f3a3039b0d ("ext4: introduce ITAIL helper")
Cc: stable@vger.kernel.org
Signed-off-by: Guanghui Yang <3497809730@qq.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/tencent_192F8A699EFD21126E02101131C9546F3C08@qq.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Eric Biggers <ebiggers@kernel.org>
Date: Thu Jul 30 10:52:12 2026 -0700
ext4: don't enable DAX on new encrypted files
commit da32af420d6d466e247c43ac0b829edeac7ae0ad upstream.
Currently, when a new encrypted regular file is created, the call to
ext4_set_inode_flags(inode, init=true) in __ext4_new_inode() is made
before EXT4_INODE_ENCRYPT is set. As a result, it can set S_DAX if the
filesystem is mounted with "-o dax=always".
EXT4_INODE_ENCRYPT then actually gets set a bit later in
__ext4_new_inode(), when it calls fscrypt_set_context() which calls
ext4_set_context(). ext4_set_context() sets EXT4_INODE_ENCRYPT and
calls ext4_set_inode_flags(inode, init=false) to set S_ENCRYPTED too.
This was intended to clear S_DAX as well. However, this was broken by
commit 043546e46dc7 ("fs/ext4: Only change S_DAX on inode load"). This
causes data written to the file to bypass encryption, also causing
xfstests failures such as generic/548 (when "-o dax=always" is used).
Fix this by simplifying the flow by making __ext4_new_inode() set
EXT4_INODE_ENCRYPT earlier. This makes it take effect in
ext4_set_inode_flags(inode, init=true), making S_DAX never be set.
Similarly, make EXT4_STATE_MAY_INLINE_DATA never be set in the first
place on new encrypted inodes. Then it doesn't need to be cleared.
As a result of these simplifications, ext4_set_context() no longer needs
to change inode flags or state when 'handle != NULL'. Remove that too.
Reported-by: Disha Goel <disgoel@linux.ibm.com>
Reported-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Closes: https://lore.kernel.org/r/20260723085648.1500357-1-ojaswin@linux.ibm.com
Fixes: 043546e46dc7 ("fs/ext4: Only change S_DAX on inode load")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Tested-by: Disha Goel <disgoel@linux.ibm.com>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20260730175212.36923-1-ebiggers@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jiazi Liu <jiazi.liu1984@gmail.com>
Date: Mon Jul 27 18:41:03 2026 +0800
ext4: fix incorrect function call when initializing s_resgid
commit c87abbab6147dcc5aa1fd8f2a61734d58d8b99ec upstream.
In __ext4_fill_super(), s_resgid is initialized by calling
ext4_get_resuid() instead of ext4_get_resgid(), resulting in the
reserved GID being set to the same value as the reserved UID rather
than the value stored in the superblock.
Fixes: 12c84dd4d308 ("ext4: add support for 32-bit default reserved uid and gid values")
Cc: stable@vger.kernel.org
Signed-off-by: Jiazi Liu <liujiazi@amazon.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://patch.msgid.link/20260727104103.28916-1-liujiazi@amazon.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Guanghui Yang <3497809730@qq.com>
Date: Wed Jul 8 08:12:04 2026 +0000
ext4: propagate errors from fast commit range replay
commit d8b8dd3530bf41e14b118702cdaf9de64bb96885 upstream.
ext4_fc_replay() stops replaying fast commit tags only when a tag
handler returns a negative error. However, ext4_fc_replay_add_range()
and ext4_fc_replay_del_range() currently return 0 from their common
exit paths even after internal failures.
This hides errors from ext4_fc_record_modified_inode(),
ext4_map_blocks(), ext4_find_extent(), ext4_ext_insert_extent(),
ext4_ext_replay_update_ex(), and ext4_ext_remove_space(). As a result,
a failed ADD_RANGE or DEL_RANGE replay can be treated as successful and
the replay code may continue with subsequent fast commit tags.
This is particularly problematic for DEL_RANGE because it may already
have marked blocks as free before ext4_ext_remove_space() fails. If the
error is swallowed, replay may continue from a partially applied range
operation.
Return the saved error from the common exit paths and make the
ERR_PTR() cases in ADD_RANGE store PTR_ERR() before jumping to out.
Fixes: 8016e29f4362 ("ext4: fast commit recovery path")
Cc: stable@vger.kernel.org
Signed-off-by: Guanghui Yang <3497809730@qq.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/tencent_E3622146846A84C75C31C7D32AC4D5AD0605@qq.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Matthias Goergens <matthias.goergens@gmail.com>
Date: Sun Aug 2 14:59:41 2026 +0800
ext4: stop retrying saturated xattr cache entries
commit 54b6bd40898de7906acb2bccc9a96d1b8e6b4323 upstream.
ext4_xattr_block_set() retries when a cache entry selected for reuse
has a saturated reference count after taking the buffer lock. The retry
returns to the mbcache lookup without making that entry ineligible, so
it can select the same unusable entry indefinitely. A task spinning
there can hold the parent directory's i_rwsem and leave concurrent
rmdir callers blocked.
Normally a reusable entry has a reference count below
EXT4_XATTR_REFCOUNT_MAX because the count and MBE_REUSABLE_B are
updated under the same buffer lock. A corrupted filesystem can violate
that invariant. The syzbot reproducer reports allocator and xattr
corruption before triggering this retry loop.
Check the untrusted on-disk count before incrementing it, avoiding
overflow, and clear MBE_REUSABLE_B when it is already saturated. The
next lookup then skips the entry that was just proven unusable. This
mirrors the normal transition at EXT4_XATTR_REFCOUNT_MAX; the release
path marks the entry reusable again on the exact 1024-to-1023
transition.
Using the same QEMU harness and guest parameters, current unpatched
Linux hung in 6 of 8 420-second trials with the do_rmdir signature;
representative NMI backtraces caught the owner spinning in
ext4_xattr_block_set(). The patched kernel completed 28 of 28 trials
without a hung-task report; the final twelve trials exercised the
reviewed overflow-safe form of the change. syzbot's patch testing also
completed without reproducing the hang.
Reported-and-tested-by: syzbot+e68dbebd9617a9250e8d@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=e68dbebd9617a9250e8d
Fixes: 65f8b80053a1 ("ext4: fix race when reusing xattr blocks")
Cc: stable@vger.kernel.org
Signed-off-by: Matthias Goergens <matthias.goergens@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reported-by: syzbot+e68dbebd9617a9250e8d@syzkaller.appspotmail.com
Tested-by: syzbot+e68dbebd9617a9250e8d@syzkaller.appspotmail.com
Link: https://patch.msgid.link/20260802065941.1726052-1-matthias.goergens@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Thomas Gleixner <tglx@kernel.org>
Date: Fri Aug 7 17:07:13 2026 +0200
futex/pi: Plug private futex exec() race
commit c5f0bc9fd1cec4a00400cc727fcde03e0fde17cc upstream.
The check for private futexes whether the waiter's mm, which is stored in
the futex_key and copied into the pi_state, is the same as the owner's mm
is not sufficient for exec(). exec() has a gap where the mm check fails to
give the correct answer:
exec()
...
exec_release_mm()
futex_exec_release()
tsk::futex::exit_state = EXITING;
cleanup_robust_list();
1) tsk::futex::exit_state = OK;
...
old_mm = tsk::mm;
2) tsk::mm = ->mm;
Between #1 and #2 the check for the mm is wrong as that mm is about to be
swapped out and eventually freed.
Plug this gap by:
1) Setting tsk::futex::exit_state to FUTEX_STATE_DEAD in
futex_exec_release()
2) Setting tsk::futex::exit_state to FUTEX_STATE_OK after
the mm has been switched.
From a futex point of view the task is dead after it finished the robust
list cleanup up to the point where it sets the state to OK again.
Fixes: 80367ad01d93 ("futex: Add basic infrastructure for local task local hash")
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Kyle Zeng <kylebot@openai.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Kyle Zeng <kylebot@openai.com>
Date: Fri Aug 7 17:07:03 2026 +0200
futex/pi: Reject cross-mm private futex owners
commit 59b3732f95dda1fbd2234514d35f4fb6b5bb6d85 upstream.
A private futex key borrows the waiter's mm without taking an mm_users
reference. Nevertheless, attach_to_pi_owner() currently accepts an owner
from a different address space and copies the private key into the owner's
PI state.
When that owner exits, exit_pi_state_list() uses the saved key to find the
hash bucket and acquires a reference to the waiter's private hash. If the
last user of the waiter's mm exits concurrently, futex_hash_free() frees
the hash while the owner still uses its bucket and reference.
Prevent this by validating in attach_to_pi_owner() that, for private
futexes, the owner mm and waiter mm are the same. Perform the check with
the owner's pi_lock held and after validating owner::futex::state to
serialize against a concurrent PI-state exit cleanup.
[ tglx: Amended comment ]
Fixes: 80367ad01d93 ("futex: Add basic infrastructure for local task local hash")
Signed-off-by: Kyle Zeng <kylebot@openai.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Assisted-by: Codex:gpt-5.6-sol
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Felix Hoffmann <f3lix.dev@gmx.de>
Date: Fri Jul 31 17:50:24 2026 +0200
futex: Avoid private hash use-after-free on final put
commit 1c7efabfbaf796f11000a46094a69955a01ec6cc upstream.
futex_private_hash_put() drops the reference to fph before evaluating
fph->mm for wake_up_var(). futex_ref_put() enables preemption again before
returning. If that put drops the final reference and the task is preempted,
another task can pivot to the replacement hash and free the old hash after
an RCU grace period. The first task then reads fph->mm from the freed
allocation when it resumes.
KASAN reports a slab-use-after-free in futex_private_hash_put(), with the
read at offset 24 in a freed kmalloc-512 allocation. The allocation and
free stacks point to futex_hash_allocate() and the RCU free path,
respectively.
Load the mm pointer while the fph reference is still held and pass the
saved value to wake_up_var(). wake_up_var() uses the pointer as a waitqueue
key and does not dereference the mm through it.
Fixes: bd54df5ea7ca ("futex: Allow to resize the private local hash")
Signed-off-by: Felix Hoffmann <f3lix.dev@gmx.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260731155024.1150011-1-f3lix.dev@gmx.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Peter Zijlstra <peterz@infradead.org>
Date: Thu Aug 20 09:49:27 2026 +0200
futex: Fix might_sleep() warning in futex_pivot_pending()
[ Upstream commit d8aa5dd97944a72d4a9e3cc79bb80fcac7d6e829 ]
A younger me put a WARN in might_sleep() to warn about nested sleep loops. This
younger me also build a wait-loop variant that can deal with it. This wait-loop
variant doesn't have all the fancy wrappers, since it isn't used much. It also
lacks wait-bit support.
Add the wait-bit support and use it to fix the nested wait issue.
Fixes: 8e7ff730dd96 ("futex: Fix race in futex_pivot_pending() during private hash resize")
Reported-by: syzbot+350a93852ac854927f45@syzkaller.appspotmail.com
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260820074927.GH1246887@noisy.programming.kicks-ass.net
Closes: https://syzkaller.appspot.com/bug?extid=350a93852ac854927f45
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Hyunwoo Kim <imv4bel@gmail.com>
Date: Tue Aug 11 23:03:16 2026 +0900
futex: Fix race on the initial mm->futex.phash.ref allocation
commit bde0238083647381d4747355c5a19115a3422b96 upstream.
futex_hash_allocate() allocates mm->futex.phash.ref without any locking.
Commit d9b05321e21e ("futex: Move futex_hash_free() back to __mmput()")
moved the allocation here and assumed that the process has just a single
thread at this point.
Commit ee9dce44362b ("futex: Drop CLONE_THREAD requirement for private
default hash alloc") widened need_futex_hash_allocate_default() to cover
any CLONE_VM clone, but left out vfork because the parent is suspended and
cannot race.
That no longer holds once vfork is nested. If a vfork child calls vfork
again and is then killed with SIGKILL, the parent is released from its
vfork wait and runs concurrently with the grandchild in the same mm.
Neither of them went through futex_hash_allocate_default().
When both call prctl(PR_FUTEX_HASH, PR_FUTEX_HASH_SET_SLOTS) at the same
time, each one sees mm->futex.phash.ref as NULL and stores its own percpu
counter. Only the last store survives. The counter stored first is no
longer reachable from the mm, so the references on it are not seen by
__futex_ref_atomic_end(). A private hash that still has references is then
considered dead and freed, and a task that still holds one of its buckets
writes into freed memory in futex_q_lock().
Store the counter once with cmpxchg() and let the loser free_percpu() its
own. The initial reference has to be taken before the store, otherwise
another task can install a private hash while the counter is still 0.
Fixes: d9b05321e21e ("futex: Move futex_hash_free() back to __mmput()")
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/ansrpP4ImE1MaBY9@v4bel
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Thomas Gleixner <tglx@kernel.org>
Date: Fri Aug 7 17:07:08 2026 +0200
futex: Sanitize and document task_struct::futex::state transitions
commit f9ece060cc43eae8a1f148737d193ba0d07b8f88 upstream.
The futex state is used to prevent a waiter from attaching to the lock
owner while the owner runs the futex cleanup in exit() or exec().
Only the state transition from FUTEX_STATE_OK to FUTEX_STATE_EXITING must
be done with the task's pi_lock held, the transition away from
FUTEX_STATE_EXITING has no serialization requirements on the writer side,
but it's completely non obvious why. It's magically protected by
exit_pi_state(), which operates under tsk::pi_lock, as that's the state
which has to be correct when the waiter observes the new state.
OTOH, taking the pi_lock in futex_cleanup_end() is not a performance issue
because at that point the lock should be uncontended in the vast majority
of cases.
Aside of that the handling of FUTEX_STATE_EXITING in attach_to_pi_owner()
and handle_exit_race() is confusing at best.
Protect the store in futex_cleanup_end() with tsk::pi_lock, handle
FUTEX_STATE_EXITING in attach_to_pi_owner() explicitly and document how
this is supposed to work.
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Kyle Zeng <kylebot@openai.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jann Horn <jannh@google.com>
Date: Fri Jul 3 17:45:52 2026 +0200
HID: asus: fix missing hid_is_usb() check
commit 02bf61dfb44f17ec187d1da1a82495951bbd12df upstream.
to_usb_interface() can only be used on a hid_device whose parent is really
USB; uhid can create devices that identify as being on BUS_USB, but don't
actually have a USB parent.
Fix the use of to_usb_interface() without a hid_is_usb() check.
I have verified that it is currently possible to trigger a kernel splat due
to this bug in an ASAN build, and that this commit fixes the issue.
Fixes: 00e005c952f7 ("hid-asus: check ROG Ally MCU version and warn")
Cc: stable@vger.kernel.org
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jann Horn <jannh@google.com>
Date: Fri Jul 3 20:30:02 2026 +0200
HID: core: fix number/pointer type confusion on long items
commit 28abce951343fcec26e397610868efa4e1395c3f upstream.
When fetch_item() is called by hid_scan_report() on an item with
HID_ITEM_TAG_LONG, it stores a pointer to the item data in
item->data.longdata instead of storing a value directly in
item->data.{u8/u16/u32}.
When item_udata() or item_sdata() encounters such an item, it incorrectly
assumes that the item is in short format, and therefore returns the lower
part of a kernel pointer reinterpreted as a number.
When a HID device is connected whose descriptor contains a
HID_GLOBAL_ITEM_TAG_REPORT_SIZE encoded in long format with size=4, this
causes the lower half of a kernel pointer to be printed into dmesg as a
number, like this:
hid (null): invalid report_size 107953555
To fix it, let item_udata() and item_sdata() verify that the item is in
short format.
Note that this bug only affects hid_scan_report(), while the main parsing
pass hid_parse_collections() will always bail out when encountering a long
item.
Sidenote: There are currently no users of data.longdata; maybe we should
just remove any parsing of long-format descriptors as a follow-up.
Fixes: 3dc8fc083dbf ("HID: Use hid_parser for pre-scanning the report descriptors")
Cc: stable@vger.kernel.org
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Baul Lee <baul.lee@xbow.com>
Date: Sun Jul 26 15:50:24 2026 +0900
HID: core: fix OOB read of field->usage in hid_set_field()
commit a13cdb19fcb223ed41bdab3bab42b98dba87e90b upstream.
hid_set_field() hands field->usage + offset to hid_dump_input() before
the guard that bounds offset:
hid_dump_input(field->report->device, field->usage + offset, value);
if (offset >= field->report_count) {
hid_err(...);
return -1;
}
Under CONFIG_DEBUG_FS hid_dump_input() dereferences that pointer, with
buf = hid_resolv_usage(usage->hid, NULL). The usage[] array is
allocated inline with the hid_field in hid_register_field() and holds
field->maxusage entries, so an offset past it reads off the end of the
kvzalloc()ed allocation and into a neighbouring object. Had the guard
run first, offset < report_count <= maxusage would already have confined
the pointer to the array.
A caller supplies such an offset today. picolcd_fb_send_tile()
validates only report->maxfield before issuing
hid_set_field(report->field[0], 11 + i, ...) for i = 0..31, so its
offsets are fixed at 11..42 and are never checked against the bound
field. When the device registers that field with fewer usages, the
framebuffer deferred-io work drives the read on every tile. KASAN
reports a 4-byte slab-out-of-bounds read in hid_dump_input() below
hid_set_field(), and the same boot logs "offset (1) exceeds
report_count (1)" from the guard that runs only afterwards.
Move the hid_dump_input() call below the guard. Because
field->maxusage >= field->report_count, the guard then establishes that
field->usage + offset lies inside the array before it is dereferenced,
for every caller and without changing behaviour on the valid path.
Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Federico Kirschbaum <federico.kirschbaum@xbow.com>
Reported-by: Baul Lee <baul.lee@xbow.com>
Cc: stable@vger.kernel.org
Signed-off-by: Baul Lee <baul.lee@xbow.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Raman Varabets <kernel-linux-20260610-80b7ab08@raman.v1.sg>
Date: Wed Jun 10 22:29:52 2026 +0800
HID: ft260: fix stack-use-after-return write in I2C read race
commit bf3e39df3a397fd82967a31d17c4e02c7feab221 upstream.
ft260_i2c_read() points dev->read_buf at a caller-supplied buffer
(often an on-stack variable), arms a completion and waits up to five
seconds for the device to return the data. The HID input callback
ft260_raw_event() runs in the input/IRQ path, independent of the
dev->lock mutex held by the read path, and copies the device-supplied
payload into dev->read_buf after a plain NULL check.
These two paths share read_buf, read_idx and read_len with no
serialization. If the device delays its response until the read
times out, ft260_i2c_read() resets the controller, clears read_buf
and returns, unwinding the stack frame the buffer lived in. A
response that arrives at that moment lets ft260_raw_event() pass the
NULL check and then memcpy() the device-controlled payload into the
now-freed stack location, a bounded but attacker-influenced
stack-use-after-return write triggerable by malicious or
malfunctioning hardware.
Add a dedicated spinlock that serializes every access to read_buf,
read_idx and read_len. ft260_raw_event() now holds it across the
NULL check, the memcpy and the index update, while the read path
takes it when arming and when clearing the buffer, so the teardown
can no longer slip between the check and the copy.
Fixes: 6a82582d9fa4 ("HID: ft260: add usb hid to i2c host bridge driver")
Cc: stable@vger.kernel.org
Signed-off-by: Raman Varabets <kernel-linux-20260610-80b7ab08@raman.v1.sg>
Reviewed-by: Michael Zaidman <michael.zaidman@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jann Horn <jannh@google.com>
Date: Fri Jul 3 17:45:53 2026 +0200
HID: huawei: fix missing hid_is_usb() check
commit 4cdb6b4b34d7823254f6e1b22faf56c96ac57fb9 upstream.
to_usb_interface() can only be used on a hid_device whose parent is really
USB; uhid can create devices that identify as being on BUS_USB, but don't
actually have a USB parent.
Fix the use of to_usb_interface() without a hid_is_usb() check.
I have verified that it is currently possible to trigger a kernel splat due
to this bug in an ASAN build, and that this commit fixes the issue.
Fixes: e93faaca84b7 ("HID: huawei: fix CD30 keyboard report descriptor issue")
Cc: stable@vger.kernel.org
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Michael Bommarito <michael.bommarito@gmail.com>
Date: Thu Jul 9 22:28:53 2026 -0400
HID: hyperv: validate initial device info bounds
commit 934b7778aa7b7c8f6bb073d2a73ba3674885bae0 upstream.
The Hyper-V synthetic HID host supplies SYNTH_HID_INITIAL_DEVICE_INFO
messages that contain a HID descriptor followed by the report descriptor
bytes. mousevsc_on_receive_device_info() trusts bLength and
wDescriptorLength without checking that the received packet contains both
byte ranges.
A malformed host or backend message can therefore make the guest read
past the received VMBus packet while copying the report descriptor. Pass
the received initial-device-info size into the parser and reject
descriptor lengths that exceed the packet.
Impact: A malicious Hyper-V host or backend can crash a guest by sending
a short initial device-info message with an oversized HID report
descriptor length.
Fixes: b95f5bcb811e ("HID: Move the hid-hyperv driver out of staging")
Cc: stable@vger.kernel.org
Assisted-by: Codex:gpt-5-5-xhigh
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jose Villaseñor Montfort <pepemontfort@gmail.com>
Date: Tue Jul 28 14:13:09 2026 -0600
HID: input: read battery capacity from its actual report offset
commit d07644524b6511b622ee7b0e2e68c9ee43d522a4 upstream.
hidinput_query_battery_capacity() assumes the state-of-charge value is
the first byte following the report ID (buf[1]) and ignores where the
battery field actually sits within the report.
An Apple Magic Trackpad 2 precedes the AbsoluteStateOfCharge byte with a
byte of status flags in its battery reports, so this query returns the
flags byte instead of the charge level.
The device happens to make that easy to observe, because it exposes the
same cell twice: its report descriptor declares AbsoluteStateOfCharge in
two reports (0x90 and 0x9b), so hidinput_setup_battery() registers two
power supplies. Only the first one is refreshed by hid-magicmouse -- it
uses hid_get_battery(), which returns the first battery of the list --
and that refresh goes through the report event path, which parses the
field correctly. Nothing ever reports the second one, so every read of
its capacity takes the query path above. On a USB-C Magic Trackpad over
USB, on an unpatched 7.1.5:
hid-<serial>-battery-144 = 100% (Charging) <- report event path
hid-<serial>-battery-155 = 3% (Discharging) <- query path
Both are the same physical battery. A raw HIDIOCGINPUT of the two
reports at that same moment:
report 0x90 -> [90 03 64]
report 0x9b -> [9b 03 64 64 00 00 10 00 00 00 00 00 00 00]
^flags ^SoC = 0x64 = 100%
The device answers correctly in both cases; only the offset the kernel
reads the capacity from is wrong. 0x03 is the flags byte (present,
charging), reported as "3%".
Bluetooth takes the same query path for its capacity, where the trackpad
reported a bogus near-constant ~4% -- 0b100, the FullyCharged flag --
regardless of the real charge.
Store the battery field's offset within the report at setup time and use
it when querying, so the capacity is read from its real position. The
report event path already parses the field correctly through the HID
core; only the explicit GET_REPORT query was wrong.
Devices whose capacity field is the first field in the report have a
report_offset of 0 and are unaffected (buf[1 + 0] == buf[1]).
Fixes: 581c4484769e ("HID: input: map digitizer battery usage")
Cc: stable@vger.kernel.org
Signed-off-by: Jose Villaseñor Montfort <pepemontfort@gmail.com>
Reviewed-by: Alec Hall <signshop.alec@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jose Villaseñor Montfort <pepemontfort@gmail.com>
Date: Tue Jul 28 22:15:57 2026 -0600
HID: magicmouse: do not keep a stale msc->input if no input is claimed
commit 0af3b89705688af01aa06025b84fa7a1e06ba6cc upstream.
magicmouse_input_mapping() caches the first hid_input's input_dev in
msc->input while the report descriptor is parsed, and the rest of the
driver treats a non-NULL msc->input as proof that an input device was
registered.
That does not hold on the hid-input error path. If hidinput_connect()
fails -- for instance because input_register_device() returns an error --
it unwinds through hidinput_disconnect(), which frees every input_dev it
created, including the one cached in msc->input.
The failure does not abort the probe. hid_connect() only skips the claim:
if ((connect_mask & HID_CONNECT_HIDINPUT) && !hidinput_connect(hdev,
connect_mask & HID_CONNECT_HIDINPUT_FORCE))
hdev->claimed |= HID_CLAIMED_INPUT;
and the "device has no listeners" bailout below it does not fire for this
driver, which sets ->raw_event; on the USB Magic Mouse 2 / Magic Trackpad
2 paths hidraw and hiddev are claimed as well. hid_hw_start() therefore
returns 0 and magicmouse_probe() continues with msc->input pointing at
freed memory. Being non-NULL, it passes the "input not registered" check
in probe and the NULL checks in ->raw_event and ->event, so the next
input report dereferences freed memory.
Clear msc->input when the HID core did not claim an input device, so the
existing NULL checks cover this case as well.
Fixes: f1a9a149abc8 ("HID: magicmouse: fix race between input_register() and probe()")
Link: https://lore.kernel.org/linux-input/20260728185542.65F091F000E9@smtp.kernel.org/
Cc: stable@vger.kernel.org
Signed-off-by: Jose Villaseñor Montfort <pepemontfort@gmail.com>
Reviewed-by: Alec Hall <signshop.alec@gmail.com>
Tested-by: Alec Hall <signshop.alec@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Andrei Fed <andfed.net@gmail.com>
Date: Mon Jul 6 19:55:07 2026 +0200
HID: magicmouse: fix battery reporting for Bluetooth Magic Trackpad USB-C
commit a1556b48efc157fdda07b52ecc56c7bd1e1786f0 upstream.
The Apple Magic Trackpad 2 (USB-C) reports a wildly wrong battery
capacity over Bluetooth, for example a constant 4% for a pack that is
actually at 74%.
The device's battery input report (0x90) is laid out as
[report-id][status][charge]. hid-input's synchronous capacity query,
hidinput_query_battery_capacity(), assumes the common
[report-id][capacity] layout and returns buf[1], which for this device
is the status byte rather than the charge (buf[2]).
magicmouse_fetch_battery(), which requests the battery report through
hid_hw_request() so the reply is decoded via the report descriptor at
the correct field offset, is gated to the USB models and never runs
over Bluetooth. The device does not push battery reports on its own
either, except a single one at connect time, which is delivered while
probe holds driver_input_lock and is silently dropped. All userspace
reads therefore go through the misparsing query, and the device is
stuck reporting its status byte as the capacity.
Enabling the fetch for Bluetooth is not sufficient on its own: user
space reacts to the power_supply registration immediately, so a query
is typically already in flight when the fetch reply is parsed.
hidinput_get_battery_property() stores the query result and marks the
battery as queried without rechecking whether a report arrived while
it was waiting, clobbering the just-reported correct value with the
misparsed one.
Fix this by adding HID_BATTERY_QUIRK_AVOID_QUERY for the Bluetooth
Magic Trackpad USB-C so the misparsing query path is never used, and
by fetching the battery at the end of probe for this device. hidp has
no asynchronous request() callback, so the fetch is serviced
synchronously via __hid_request() while probe still holds
driver_input_lock; call hid_device_io_start() first so the reply is
processed instead of being discarded.
Tested with a Magic Trackpad USB-C (004c:0324) over Bluetooth on
6.18.37: the reported capacity now matches the device (verified against
a raw GET_REPORT of report 0x90) and updates on reconnect.
Fixes: 87a2f10395c8 ("HID: magicmouse: Apple Magic Trackpad 2 USB-C driver support")
Cc: stable@vger.kernel.org
Signed-off-by: Andrei Fed <andfed.net@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jose Villaseñor Montfort <pepemontfort@gmail.com>
Date: Tue Jul 14 23:35:26 2026 -0600
HID: magicmouse: prevent unbounded recursion in magicmouse_raw_event()
commit db8d634128d2ba88d79c0b601e983ebe14bb0519 upstream.
magicmouse_raw_event() handles DOUBLE_REPORT_ID (0xf7) packets, which pack
two touch reports into one, by splitting the packet and calling itself on
each half. The only guard against runaway recursion is a "size < 1" check,
which stops zero-sized calls but does not bound the recursion depth.
A malicious HID device that matches this driver can send a report starting
with DOUBLE_REPORT_ID and filled with the sequence [0xf7, 0x00]. Each level
consumes two bytes and recurses on the remainder, so an incoming report of
up to HID_MAX_BUFFER_SIZE (16 KiB) drives roughly 8000 nested calls. That
easily exhausts the 16 KiB kernel stack, leading to a stack overflow: a
panic with CONFIG_VMAP_STACK, or memory corruption without it.
A double report only ever wraps two normal reports; it is never
legitimately nested. Refuse to re-enter the DOUBLE_REPORT_ID case from a
recursive call so the recursion depth is bounded to two, while all valid
packets keep being parsed exactly as before.
Fixes: a462230e16ac ("HID: magicmouse: enable Magic Trackpad support")
Link: https://lore.kernel.org/linux-input/20260706181347.700DB1F00A3F@smtp.kernel.org/
Cc: stable@vger.kernel.org
Signed-off-by: Jose Villaseñor Montfort <pepemontfort@gmail.com>
Reviewed-by: Alec Hall <signshop.alec@gmail.com>
Tested-by: Alec Hall <signshop.alec@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Christopher Kodama <ckhordiasma@gmail.com>
Date: Sat Jul 25 16:34:46 2026 -0400
HID: magicmouse: re-enable multitouch after reset-resume
commit 4253fe22b137c4ee68f36b707fdb1b44b191edc4 upstream.
When the Apple Magic Trackpad 2 (USB) is reset across a power transition
(e.g. resume from hibernation) it drops out of multitouch mode: it keeps
sending report ID 0x02 on its HID_TYPE_USBMOUSE interface, but the packet
shrinks from 21 to 8 bytes and the trackpad2 handler drops it (size < 12).
Clicks still work but pointer motion is lost until the device is re-plugged
or the driver reloaded.
Re-enable multitouch from .reset_resume via the workqueue. Only
.reset_resume is needed; suspend-to-idle keeps the device powered and
retains multitouch.
Fixes: 87a2f10395c8 ("HID: magicmouse: Apple Magic Trackpad 2 USB-C driver support")
Cc: stable@vger.kernel.org
Assisted-by: Claude-Code:claude-opus-4-8
Signed-off-by: Christopher Kodama <ckhordiasma@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Ibrahim Hashimov <security@auditcode.ai>
Date: Wed Jul 15 13:52:53 2026 +0200
HID: nintendo: fix out-of-bounds read in joycon_ctlr_read_handler()
commit 27b376b945c0aac46fcdfcc950b14a85b874b557 upstream.
joycon_ctlr_read_handler() casts an incoming HID input report to
struct joycon_input_report and parses it, guarding the cast only with a
12-byte length check:
if (size >= 12) /* make sure it contains the input report */
joycon_parse_report(ctlr, (struct joycon_input_report *)data);
struct joycon_input_report is 49 bytes: a 13-byte header followed by a
union whose IMU arm is 36 bytes. For an IMU report joycon_parse_report()
-> joycon_parse_imu_report() walks that union (struct offsets 13..48),
so a report of exactly 12 bytes with data[0] == JC_INPUT_IMU_DATA passes
the guard yet is read up to 37 bytes past its declared length. The
over-read bytes are decoded into accelerometer/gyroscope values and
forwarded to userspace through the "(IMU)" input device, leaking
driver-internal memory. data[0] and size are fully controlled by a
malicious or spoofed Joy-Con/Pro Controller.
Receive buffers are sized to the maximum report length, so this is an
over-read within the allocation rather than a slab OOB, but the decoded
bytes still reach userspace.
The sibling subcmd path in joycon_ctlr_handle_event() already bounds the
same cast correctly:
if (size < sizeof(struct joycon_input_report) ||
data[0] != JC_INPUT_SUBCMD_REPLY)
break;
Use the same sizeof(struct joycon_input_report) bound here.
Fixes: 2af16c1f846b ("HID: nintendo: add nintendo switch controller driver")
Cc: stable@vger.kernel.org
Signed-off-by: Ibrahim Hashimov <security@auditcode.ai>
Assisted-by: AuditCode-AI:2026.07
Reviewed-by: Silvan Jegen <s.jegen@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jiangshan Yi <yijiangshan@kylinos.cn>
Date: Thu Jul 30 18:15:06 2026 +0800
HID: nintendo: register input device after capabilities are set
commit d723bc1fe2e72b9252234e94c11af644ec477bf7 upstream.
input_register_device() exposes the device to userspace immediately.
In joycon_input_create() it was called before joycon_config_rumble()
configures the FF_RUMBLE capability and the memless force-feedback
device, so a concurrent EVIOCSFF could dereference a NULL dev->ff.
Registering early also means the initial udev event lacks button and
axis information, which can make input managers ignore the device.
Move input_register_device() to the end of joycon_input_create(), after
all capabilities, the IMU input device and the force-feedback callbacks
have been configured.
Fixes: 2af16c1f846b ("HID: nintendo: add nintendo switch controller driver")
Reported-by: sashiko-bot@kernel.org
Closes: https://sashiko.dev/#/patchset/20260730031927.25444-1-yijiangshan@kylinos.cn?part=1
Cc: stable@vger.kernel.org
Signed-off-by: Jiangshan Yi <yijiangshan@kylinos.cn>
Link: https://sashiko.dev/#/patchset/20260730031927.25444-1-yijiangshan@kylinos.cn?part=1
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jiangshan Yi <yijiangshan@kylinos.cn>
Date: Thu Jul 30 11:19:27 2026 +0800
HID: nintendo: stop device IO before hid_hw_stop on probe failure
commit 1f74d3bff6fe04a64e02ab3661d2e0d554565aa6 upstream.
nintendo_hid_probe() calls hid_device_io_start() before joycon_init()
and joycon_leds_create(). If either fails, the error path jumps to
err_close which calls hid_hw_close()/hid_hw_stop() without first calling
hid_device_io_stop().
hid_hw_stop() does not stop device IO, so hid_input_report() may still
run and access driver data that is being torn down, resulting in a
use-after-free.
Add an err_io_stop label that calls hid_device_io_stop() before
hid_hw_close(), and point the two post-io_start error paths at it.
Fixes: 2af16c1f846b ("HID: nintendo: add nintendo switch controller driver")
Cc: stable@vger.kernel.org
Signed-off-by: Jiangshan Yi <yijiangshan@kylinos.cn>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Baul Lee <baul.lee@xbow.com>
Date: Sun Jul 26 15:25:03 2026 +0900
HID: pidff: fix OOB write when hid->inputs is empty
commit 67bb1074e3d2d12fa059a9cc707e89398a4e4704 upstream.
hid_pidff_init_with_quirks() derives its input_dev from
list_entry(hid->inputs.next, struct hid_input, list)
without first checking that hid->inputs is non-empty. The list member
of struct hid_input is at offset 0, so on an empty list list_entry()
yields &hid->inputs itself and the following hidinput->input load reads
an unrelated member of struct hid_device. dev is then a type-confused
pointer, and force-feedback init writes through it: each
set_bit(FF_*, dev->ffbit) stores 8 bytes at dev + 192, past the end of
the object dev actually aliases, and input_ff_create() adds further
writes of a heap pointer and two function pointers.
Until hid-universal-pidff the only caller was hid_pidff_init() from
usbhid, which runs under HID_CLAIMED_INPUT and therefore always has at
least one hid_input. universal_pidff_probe() starts the device with
HID_CONNECT_DEFAULT & ~HID_CONNECT_FF and then calls
hid_pidff_init_with_quirks() directly whenever the descriptor carries a
PID usage page, bypassing that gate. A report descriptor whose only
application collection is on HID_UP_PID leaves hid->inputs empty while
hid_connect() still succeeds through the hidraw claim, so probe reaches
the unguarded list_entry().
The write happens in the USB probe path, on the hotplug workqueue, so
plugging in a malicious device is enough to trigger it; no attacker
software and no logged-in user are required. KASAN reports an 8-byte
out-of-bounds write in hid_pidff_init_with_quirks() reached from
universal_pidff_probe().
Check for an empty list before deriving dev and return -ENODEV, as the
other HID force-feedback drivers already do. universal_pidff_probe()
propagates the error and unwinds.
Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com>
Fixes: f06bf8d94fff ("HID: Add hid-universal-pidff driver and supported device ids")
Reported-by: Federico Kirschbaum <federico.kirschbaum@xbow.com>
Reported-by: Baul Lee <baul.lee@xbow.com>
Cc: stable@vger.kernel.org
Signed-off-by: Baul Lee <baul.lee@xbow.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jann Horn <jannh@google.com>
Date: Fri Jul 3 17:45:54 2026 +0200
HID: rapoo: fix missing hid_is_usb() check
commit b57af2448268c30c25509a832b6ff6dc27176b28 upstream.
to_usb_interface() can only be used on a hid_device whose parent is really
USB; uhid can create devices that identify as being on BUS_USB, but don't
actually have a USB parent.
Fix the use of to_usb_interface() without a hid_is_usb() check.
Add a dependency on USB_HID for hid_is_usb(), as other HID drivers do; the
alternative would be to provide a simple stub implementation on !USB_HID
builds.
I have verified that it is currently possible to trigger a kernel splat due
to this bug in an ASAN build, and that this commit fixes the issue.
Fixes: b3b1c68fb726 ("HID: rapoo: Add support for side buttons on RAPOO 0x2015 mouse")
Cc: stable@vger.kernel.org
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Haoxiang Li <haoxiang_li2024@163.com>
Date: Tue Jul 7 15:15:44 2026 +0800
HID: sensor: custom: Fix use-after-free in enable_sensor
commit ad8fb82b04422f49530d2aa2753cc81d1c60102c upstream.
enable_sensor_store() can call set_power_report_state(), which
dereferences sensor_inst->power_state and sensor_inst->report_state.
These pointers refer to entries in sensor_inst->fields.
Create the field attributes before exposing the enable_sensor sysfs
attribute, so enable_sensor cannot be accessed before the state it
depends on has been initialized.
On remove, delete enable_sensor before freeing the field attributes,
so a concurrent sysfs write cannot dereference freed memory through
power_state or report_state.
Reported-by: Sashiko AI Review <sashiko-bot@kernel.org>
Link: https://sashiko.dev/#/patchset/20260623021950.1736413-1-haoxiang_li2024@163.com?part=1
Fixes: 4a7de0519df5 ("HID: sensor: Custom and Generic sensor support")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Ibrahim Hashimov <security@auditcode.ai>
Date: Tue Jul 14 19:39:46 2026 +0200
HID: uclogic: fix use-after-free of inrange_timer on remove
commit 506fd50a9027340f0e9dcc587d10ccb03312dba6 upstream.
uclogic_remove() cancels the pen in-range timer and then stops the
device:
timer_delete_sync(&drvdata->inrange_timer);
hid_hw_stop(hdev);
timer_delete_sync() only guarantees the timer is idle at that instant.
uclogic_raw_event_pen() keeps delivering pen reports until hid_hw_stop()
stops the transport several lines later, and every report with
pen->inrange == UCLOGIC_PARAMS_PEN_INRANGE_NONE re-arms the timer:
mod_timer(&drvdata->inrange_timer, jiffies + msecs_to_jiffies(100));
A report landing between the timer_delete_sync() call and the transport
teardown in hid_hw_stop() re-arms inrange_timer after it was cancelled.
uclogic_remove() then returns and the devm drvdata is freed, while
hid_hw_stop() has already freed the input device drvdata->pen_input
points at, so when the timer fires ~100 ms later
uclogic_inrange_timeout() dereferences freed memory -- a use-after-free
in timer-softirq context.
Swapping the two calls is not a fix: stopping the device first frees
drvdata->pen_input via hidinput_disconnect() while the timer may still
be pending, so a timer already armed before removal fires on the freed
input device in the window before timer_delete_sync() runs.
Use timer_shutdown_sync() before hid_hw_stop() instead. It cancels the
timer, waits for a running callback while pen_input is still valid, and
prevents any further re-arming -- a later mod_timer() from an in-flight
report is silently ignored -- so the timer is provably dead before
hid_hw_stop() frees the inputs. This is the ordering the timer core
documents for this "timer re-armed from another path" teardown case.
Fixes: 01309e29eb95 ("HID: uclogic: Support in-range reporting emulation")
Cc: stable@vger.kernel.org
Signed-off-by: Ibrahim Hashimov <security@auditcode.ai>
Assisted-by: AuditCode-AI:2026.07
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Woraphat Khiaodaeng <worapat.kd2@gmail.com>
Date: Sun Aug 2 14:35:18 2026 +0700
io_uring/cmd: fix iovec leak when the async cmd is not recycled
commit bb34ae5da3365699d53a756f4c96b6ea9f8ba0c1 upstream.
An io_async_cmd carries an iovec array in ->vec.iovec, allocated when the
vec has to grow and kept across recycling through ctx->cmd_cache. On two
paths nothing frees it and io_clean_op()'s kfree(req->async_data) drops
the io_async_cmd without it.
io_req_uring_cleanup() clears the async data flags only when
io_alloc_cache_put() succeeds, and the cache holds IO_ALLOC_CACHE_MAX ==
128 entries, so once it is full the put fails and the vec is left behind.
An NVMe passthrough workload gets there without doing anything unusual:
nvme_uring_cmd_io() returns -EIOCBQUEUED, so the io_async_cmd stays
attached for the lifetime of the command and the live object count tracks
the queue depth. Above 128 the puts start failing.
->cleanup is the last chance to free an inherited vec, since
io_req_uring_cleanup() returns early for an io-wq issued command and is
not called at all for one completed without ever being issued. But
io_clean_op() calls ->cleanup only if REQ_F_NEED_CLEANUP is set, and for
uring_cmd that happens only where the vec has to grow, so a command
reusing a large enough cached vec never sets it. io_rw_alloc_async() and
io_msg_alloc_async() flag an inherited vec for exactly this reason;
io_uring_cmd_prep() does not.
Flag an inherited vec in io_uring_cmd_prep(), and free the vec when the
cache put fails, as io_req_rw_cleanup() does.
The leak is invisible under KASAN, where io_alloc_cache_vec_kasan() frees
the vec unconditionally.
Fixes: 3a4689ac109f ("io_uring/cmd: add iovec cache for commands")
Cc: stable@vger.kernel.org
Signed-off-by: Woraphat Khiaodaeng <worapat.kd2@gmail.com>
Link: https://patch.msgid.link/20260802073518.419-1-worapat.kd2@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jens Axboe <axboe@kernel.dk>
Date: Thu Jul 30 06:50:13 2026 -0600
io_uring/futex: don't mark futex wake requests as inflight
commit 73e7019097473fc9f83a334ef2c6ab3343709fef upstream.
Commit 079afb081c42 ("io_uring/futex: mark wait requests as inflight")
added inflight tracking to ensure that do_exit() ->
io_uring_files_cancel() finds and cancels pending futex waits before the
mm goes away, as a private futex wait depends on the mm private futex
hash staying alive for the duration of the request. However, as
io_futex_prep() is shared between FUTEX_WAIT and FUTEX_WAKE, wake
requests got marked as inflight as well.
A futex wake executes fully inline at issue time and never depends on
the mm staying alive after completion, hence there's no need to track
it. Kill it.
Cc: stable@vger.kernel.org
Fixes: 079afb081c42 ("io_uring/futex: mark wait requests as inflight")
Reported-by: Chengfeng Lin <lin2530632123@gmail.com>
Link: https://lore.kernel.org/io-uring/CANGjgdn=R_qyUdE=j9za+vkmqcxacbP-84OHXF4nZ4ho9qRyVg@mail.gmail.com/
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jens Axboe <axboe@kernel.dk>
Date: Thu Jul 30 06:50:47 2026 -0600
io_uring/futex: only mark private futex waits as inflight
commit 4d327bbd1cd2485783553b6b2b401aa475f90dd0 upstream.
Inflight tracking of futex wait requests exists to ensure that do_exit()
-> io_uring_files_cancel() cancels them before the mm goes away, as a
private futex wait depends on the mm private futex hash staying alive
for the duration of the request.
Shared futexes have no such dependency. A FLAGS_SHARED request always
resolves to either an inode based key or an mm-shared key, both of which
fail futex_key_is_private() and hence always hash into the global futex
hash, whose lifetime isn't tied to the mm.
Only mark vectored futex waits as inflight if the futex is private.
Cc: stable@vger.kernel.org
Fixes: 079afb081c42 ("io_uring/futex: mark wait requests as inflight")
Link: https://lore.kernel.org/io-uring/CANGjgdn=R_qyUdE=j9za+vkmqcxacbP-84OHXF4nZ4ho9qRyVg@mail.gmail.com/
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Vishnu Razdan <vrazdan@openai.com>
Date: Tue Aug 11 00:01:27 2026 -0700
io_uring/io-wq: fix worker accounting when canceling creation callbacks
commit 297b5ccea4acacaa47c150f043bce695202afbf1 upstream.
create_worker_cb() reserves an io-wq worker slot only after its
task-work callback runs. If the callback is canceled before then,
io_worker_cancel_cb() still decrements acct->nr_workers. When an
existing worker retires with its creation callback pending, that
worker has already decremented the same account's worker count.
The resulting undercount permits worker creation beyond the account's
configured limit. On an AST2600 OpenBMC system, an unchanged sensor
daemon reached 4,291 threads with the original kernel. With an
equivalent downstream fix, 25 passive samples under its normal
workload showed 6-9 threads.
Decrement nr_workers only when the canceled callback is not
create_worker_cb(). Continuation callbacks still release their reserved
slot, and both callback types retain the existing running-count,
reference-count, and create-state cleanup.
Fixes: 1d5f5ea7cb7d ("io-wq: remove worker to owner tw dependency")
Cc: stable@vger.kernel.org
Assisted-by: Codex:gpt-5.6-sol
Signed-off-by: Vishnu Razdan <vrazdan@openai.com>
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Link: https://patch.msgid.link/20260811-vrazdan-io-wq-b4-submit-v1-1-719ced16c921@openai.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Ali Ahmet Memis <ali@iusegentoo.com>
Date: Sun Aug 2 16:30:30 2026 +0000
io_uring/rsrc: fix folio size overflow in io_vec_fill_bvec()
commit 3f3a6a16bbe8bde76532d9415438f8cdef439e5d upstream.
io_vec_fill_bvec() computes the folio size with a plain int 1:
unsigned long folio_size = 1 << imu->folio_shift;
imu->folio_shift is unsigned int and comes from folio_shift() of the
folio backing the registered buffer, so it can be 32 or more on a 64 bit
kernel. Shifting int 1 that far is undefined, and on x86 and arm64 the
count is taken modulo 32, so a shift of 34 yields 4 rather than 16G.
Every other folio_shift shift in this file already uses 1UL.
The result is that the segment estimate and the fill loop disagree.
io_estimate_bvec_size() sizes the bvec array with the real shift:
max_segs += (iov[i].iov_len >> shift) + 2;
so a 1M iovec on a 16G folio is charged 2 segments, while
io_vec_fill_bvec() then walks the same iovec in folio_size chunks of 4
bytes and writes res_bvec[bvec_idx] a quarter of a million times, past
the end of the array it was given. src_bvec is advanced once per
iteration as well, so imu->bvec is read past its end at the same time.
validate_fixed_range() only checks that the range is inside the
registered buffer and does not bound the segment count.
Reaching it needs a folio with a shift of at least 32, which means a
gigantic hugetlb page: 16G on arm64 with 64K pages, where
CONT_PMD_SHIFT is 34 and hugetlb_add_hstate(CONT_PMD_SHIFT - PAGE_SHIFT)
registers that size, and likewise on powerpc. x86_64 tops out at 1G, so
a shift of 30, which still fits in int and is unaffected.
Use 1UL, as the rest of the file does.
Fixes: 9ef4cbbcb4ac ("io_uring: add infra for importing vectored reg buffers")
Cc: stable@vger.kernel.org
Signed-off-by: Ali Ahmet Memis <ali@iusegentoo.com>
Link: https://patch.msgid.link/20260802163030.51005-1-ali@iusegentoo.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jens Axboe <axboe@kernel.dk>
Date: Sat Aug 15 17:53:44 2026 -0600
io_uring/uring_cmd: don't skip completion for a synchronous multishot cmd
commit 360941242f09437a1e07cbed9b5a96663ffeabb6 upstream.
If IORING_URING_CMD_MULTISHOT is set, io_uring_cmd() treats any
non-negative return from ->uring_cmd() as the driver having taken
ownership of the request and returns IOU_ISSUE_SKIP_COMPLETE. But
nothing guarantees that the driver did so, and any handler that just
completes the command inline and returns 0 or a positive result then
leaves the request orphaned, leaking the io_kiocb, the async data,
and the file reference.
The special case isn't needed. ublk returns -EIOCBQUEUED for the
multishot fetch command, which is passed through as-is, and the poll
driven socket timestamp command returns -EAGAIN. Kill it, a multishot
handler that wants to hang on to the request must return -EIOCBQUEUED
or -EAGAIN like any other command.
Fixes: 620a50c92700 ("io_uring: uring_cmd: add multishot support")
Cc: stable@vger.kernel.org
Reported-by: syzbot+a4ccdd7ebf452e4d4701@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/6a7a0194.b50370da.49fe0.0056.GAE@google.com/
Link: https://lore.kernel.org/all/20260811115125.1831170-1-vasilisalmpanis@gmail.com/
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jens Axboe <axboe@kernel.dk>
Date: Fri Aug 14 06:58:43 2026 -0600
io_uring: defer eventfd signaling when queued from a wakeup handler
commit cd305ee3633a45fcf5f3a5d83f99f3cb77d87b6e upstream.
io_req_local_work_add() signals the CQ ring eventfd inline when it is the
one to push the first entry onto ->work_list. For DEFER_TASKRUN rings that
add is frequently done from a waitqueue wakeup handler, where an
arbitrary waitqueue lock is held.
eventfd_signal_mask() only refuses to recurse when current->in_eventfd
is set, but that bit is set by eventfd_signal_mask() itself. If the wake
chain starts somewhere else, signal goes out inline and can feed back
into epoll.
Add IOU_F_TWQ_IN_WAKE, set it on the task_work add done from the three
waitqueue callbacks, and use it to force io_eventfd_signal() down the
existing call_rcu_hurry() deferral instead of signaling inline.
Fixes: 21a091b970cd ("io_uring: signal registered eventfd to process deferred task work")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20260813133843.2933127-1-4ncienth@gmail.com/
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Peiyang He <peiyang_he@smail.nju.edu.cn>
Date: Thu Aug 6 12:50:59 2026 +0800
iommu/iommufd: Fix NULL pointer deref in iommufd_ioas_change_process when racing with iopt_map_file_pages
commit d616de490ec0242dcf78f02f1adf7baa035c4d0d upstream.
iommufd_ioas_change_process() iterates every IOAS area while only
holding every IOAS iova_rwsem, so it assumes every area has a non-NULL
pages pointer. That assumption can be false when it runs concurrently
with iopt_map_file_pages().
iopt_map_pages() executes in two phases. It first creates the area and
inserts it into the interval tree under iova_rwsem, with area->pages
still NULL. It then drops iova_rwsem and later fills area->pages
under domains_rwsem. This leaves a window between area creation and
area->pages fill where a concurrent iommufd_ioas_change_process()
can observe the area and dereference a NULL area->pages pointer,
leading to a NULL pointer dereference:
BUG: kernel NULL pointer dereference, address: 00000000000000c0
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 4b655067 P4D 4b655067 PUD 0
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 0 UID: 0 PID: 11841 Comm: syz.1.628 Not tainted 7.1.0 #3 PREEMPT(full)
Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:iommufd_ioas_change_process+0x419/0xd50 drivers/iommu/iommufd/ioas.c:538
Code: 48 89 c3 48 85 c0 0f 84 cc 00 00 00 e8 10 f5 cb fd 48 8d 7b 68 e8 a7 b5 eb fd 48 8b 6b 68 48 8d bd c0 00 00 00 e8 17 b2 eb fd <8b> ad c0 00 00 00 bf 01 00 00 00 89 ee e8 85 ef cb fd 83 fd 01 74
RSP: 0018:ffffc90015c17d28 EFLAGS: 00010246
RAX: ffff8880186d5328 RBX: ffff88801d25e240 RCX: 0000000080000000
RDX: 00000000000002d7 RSI: ffffffff83ba9e10 RDI: 00000000000000c0
RBP: 0000000000000000 R08: ffffffff8e781eb8 R09: 0000000000000000
R10: 00000000000000c0 R11: ffffffff83ba9e29 R12: ffff88802e216008
R13: ffff88802e216000 R14: 0000000000000001 R15: 0000000000000000
FS: 00007f4aea3f66c0(0000) GS:ffff8880b1fa1000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000000c0 CR3: 000000004b75c000 CR4: 0000000000350ef0
Call Trace:
<TASK>
iommufd_fops_ioctl+0x287/0x400 drivers/iommu/iommufd/main.c:533
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:597 [inline]
__se_sys_ioctl fs/ioctl.c:583 [inline]
__x64_sys_ioctl+0x120/0x170 fs/ioctl.c:583
x64_sys_call+0x1092/0x1fb0 arch/x86/include/generated/asm/syscalls_64.h:17
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x10a/0x680 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f4aec1a82bd
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f4aea3f6018 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007f4aec436090 RCX: 00007f4aec1a82bd
RDX: 0000200000000180 RSI: 0000000000003b92 RDI: 0000000000000003
RBP: 00007f4aec250295 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007f4aec436128 R14: 00007f4aec436090 R15: 00007ffd04ef23e0
</TASK>
Modules linked in:
CR2: 00000000000000c0
---[ end trace 0000000000000000 ]---
RIP: 0010:iommufd_ioas_change_process+0x419/0xd50 drivers/iommu/iommufd/ioas.c:538
Code: 48 89 c3 48 85 c0 0f 84 cc 00 00 00 e8 10 f5 cb fd 48 8d 7b 68 e8 a7 b5 eb fd 48 8b 6b 68 48 8d bd c0 00 00 00 e8 17 b2 eb fd <8b> ad c0 00 00 00 bf 01 00 00 00 89 ee e8 85 ef cb fd 83 fd 01 74
RSP: 0018:ffffc90015c17d28 EFLAGS: 00010246
RAX: ffff8880186d5328 RBX: ffff88801d25e240 RCX: 0000000080000000
RDX: 00000000000002d7 RSI: ffffffff83ba9e10 RDI: 00000000000000c0
RBP: 0000000000000000 R08: ffffffff8e781eb8 R09: 0000000000000000
R10: 00000000000000c0 R11: ffffffff83ba9e29 R12: ffff88802e216008
R13: ffff88802e216000 R14: 0000000000000001 R15: 0000000000000000
FS: 00007f4aea3f66c0(0000) GS:ffff8880b1fa1000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000000c0 CR3: 000000004b75c000 CR4: 0000000000350ef0
----------------
Code disassembly (best guess):
0: 48 89 c3 mov %rax,%rbx
3: 48 85 c0 test %rax,%rax
6: 0f 84 cc 00 00 00 je 0xd8
c: e8 10 f5 cb fd call 0xfdcbf521
11: 48 8d 7b 68 lea 0x68(%rbx),%rdi
15: e8 a7 b5 eb fd call 0xfdebb5c1
1a: 48 8b 6b 68 mov 0x68(%rbx),%rbp
1e: 48 8d bd c0 00 00 00 lea 0xc0(%rbp),%rdi
25: e8 17 b2 eb fd call 0xfdebb241
* 2a: 8b ad c0 00 00 00 mov 0xc0(%rbp),%ebp <-- trapping instruction
30: bf 01 00 00 00 mov $0x1,%edi
35: 89 ee mov %ebp,%esi
37: e8 85 ef cb fd call 0xfdcbefc1
3c: 83 fd 01 cmp $0x1,%ebp
3f: 74 .byte 0x74
Fix by mirroring the handling logic in iopt_unmap_iova_range(),
i.e. return -EBUSY if area->pages is NULL.
Fixes: 829ed626499c ("iommufd: Add IOMMU_IOAS_CHANGE_PROCESS")
Link: https://patch.msgid.link/r/7344B7A7B9957A65+20260806045059.1884737-1-peiyang_he@smail.nju.edu.cn
Cc: stable@vger.kernel.org
Signed-off-by: Peiyang He <peiyang_he@smail.nju.edu.cn>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Shameer Kolothum <skolothumtho@nvidia.com>
Date: Mon Jun 29 10:41:06 2026 +0100
iommu/tegra241-cmdqv: Fix CMD_SYNC use-after-free on teardown
commit 9ff145a25c5c8a26b06ef7cf558fb536b18bba6d upstream.
arm_smmu_impl_remove() is registered as a devres action in
arm_smmu_impl_probe(), before arm_smmu_init_queues() allocates
smmu->cmdq.q.base. On a devres unwind, whether a failed probe or an
unbind, the queue is freed first and arm_smmu_impl_remove() then runs
tegra241_cmdqv_remove_vintf(), whose VINTF deinit issues a CMD_SYNC on
the freed memory.
Observed during testing with a QEMU hack that makes the VCMDQ fail to
enable, so the impl reset fails and probe aborts into the devres unwind:
platform NVDA200C:00: tegra241_cmdqv: VINTF0: VCMDQ0/LVCMDQ0: failed to enable, STATUS=0x00000000
platform NVDA200C:00: tegra241_cmdqv: VINTF0: VCMDQ0/LVCMDQ0: GERRORN=0x0, GERROR=0x4, CONS=0x0
platform NVDA200C:00: tegra241_cmdqv: VINTF0: VCMDQ0/LVCMDQ0: uncleared error detected, resetting
arm-smmu-v3 arm-smmu-v3.0.auto: failed to reset impl
arm-smmu-v3 arm-smmu-v3.0.auto: probe with driver arm-smmu-v3 failed with error -110
Unable to handle kernel paging request at virtual address ffff8000891e0098
...
Internal error: Oops: 0000000096000047 [#1] SMP
...
Call trace:
arm_smmu_cmdq_issue_cmdlist+0x320/0x6fc (P)
tegra241_vcmdq_hw_deinit+0x98/0x168
tegra241_vintf_hw_deinit+0x5c/0x1b0
tegra241_cmdqv_remove_vintf+0x34/0xec
tegra241_cmdqv_remove+0x40/0x9c
arm_smmu_impl_remove+0x20/0x30
devm_action_release+0x14/0x20
devres_release_all+0xa8/0x110
device_unbind_cleanup+0x18/0x84
really_probe+0x1f0/0x29c
Drop the VINTF deinit from tegra241_cmdqv_remove_vintf() so the unwind no
longer touches the freed queue. Quiesce the VINTFs earlier instead. Add a
device_disable() impl op and run it from arm_smmu_disable_action() while
the CMDQ is still up. That handles a live unbind. A failed reset is already
handled because tegra241_vintf_hw_init() deinits the VINTF on its own error
path. tegra241_cmdqv_remove_vintf() is also used by the iommufd viommu
destroy path, so quiesce there too.
Fixes: 4dc0d12474f9 ("iommu/tegra241-cmdqv: Add user-space use support")
Cc: stable@vger.kernel.org
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Shameer Kolothum <skolothumtho@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Yong Wang <edragain@163.com>
Date: Fri Aug 14 01:35:26 2026 +0800
ipv4: reject undersized MTUs in ip_do_fragment()
commit c0726f0caf8c6b3208552949e17d23634a2f3129 upstream.
ip_do_fragment() subtracts the IPv4 header length from the effective
MTU and passes the resulting payload MTU to ip_frag_next().
If the effective MTU is smaller than hlen + 8, ip_frag_next() rounds
the fragment payload length down to zero. The fragmentation state then
never makes forward progress: state->left, state->ptr and state->offset
stay unchanged while ip_do_fragment() keeps allocating and transmitting
header-only fragments until the softlockup detector fires.
This is reproducible with a route installed using "mtu lock 20", but it
is also reproducible without route MTU lock, for example by forwarding a
packet to a device whose MTU is 20.
Fix it in ip_do_fragment() by rejecting mtu < hlen + 8 with -EMSGSIZE,
matching the existing IPv6 fragmentation check.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Reported-by: Vega <vega@nebusec.ai>
Signed-off-by: Yong Wang <edragain@163.com>
Signed-off-by: Ren Wei <weir@nebusec.ai>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/8809ef6314b98913681b0b370a05a85c2b6cd579.1786599079.git.edragain@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Luxiao Xu <rakukuip@gmail.com>
Date: Wed Aug 12 20:54:38 2026 +0800
ipv6: fix use-after-free in ip6_finish_output2()
commit d0d48d999b0eee6bb176ef4e39d9be868fa80f7e upstream.
ip6_finish_output2() caches a pointer to the IPv6 destination
address (daddr) before invoking lwtunnel_xmit(). The LWT-BPF
transmit path or other encapsulation operations within
lwtunnel_xmit() can reallocate the skb head, freeing the memory
that daddr points to. When lwtunnel_xmit() returns
LWTUNNEL_XMIT_CONTINUE, the function continues to use the stale
daddr pointer to compute the nexthop and to look up or create the
neighbour entry. This results in a use-after-free read, which can
leak sensitive kernel data, pollute the neighbour table with
arbitrary values, misdirect traffic, or crash the system.
Fix this by re-fetching the IPv6 header and the destination
address pointer after lwtunnel_xmit() returns
LWTUNNEL_XMIT_CONTINUE, ensuring that the subsequent nexthop
computation and neighbour lookup operate on valid memory.
Fixes: e415ed3a4b8b ("ipv6: use skb_expand_head in ip6_finish_output2")
Cc: stable@vger.kernel.org
Reported-by: Vega <vega@nebusec.ai>
Signed-off-by: Luxiao Xu <rakukuip@gmail.com>
Signed-off-by: Ren Wei <weir@nebusec.ai>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/4aa3f53bc44e79572c6dd2340ec7b68ef1a3d87d.1786516730.git.rakukuip@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Date: Thu Jul 16 08:01:29 2026 +0900
kcov: fix data corruption and race conditions on PREEMPT_RT
commit 2eed77fdcb0cc48e8eccb2bcd4b7f2c6d650e84c upstream.
syzbot is reporting KCOV state corruption on PREEMPT_RT kernels, for the
temporary storage used for saving/restoring remote KCOV state is currently
allocated as the per-CPU area.
On PREEMPT_RT kernels, softirq handlers run as preemptible task threads
(e.g., ksoftirqd). If a softirq context preempts a task running a remote
KCOV session, it safely saves the task's state into the per-CPU area.
However, if that softirq thread is subsequently preempted by a higher-
priority softirq thread on the same CPU, the second softirq will overwrite
the same per-CPU area, permanently destroying the original task's KCOV
state.
Fix this data corruption by moving the temporary storage from the per-CPU
area to the per-thread area. Since each softirq thread now owns its own
task context, nested softirq preemption no longer causes data overwrites.
Note that while the temporary storage is now on a per-thread basis, the
per-CPU kcov_percpu_data.lock must be retained, for we need to ensure that
kcov_remote_start() and kcov_remote_stop() operate atomically without
racing against asynchronous interrupts that manipulate the current task's
KCOV state.
It is likely that GFP_KERNEL allocation by vmalloc_node() in kcov_init()
has already called panic() before returning NULL, for there will be no
OOM-killable userspace processes when __init function of built-in module
runs. But this patch also fixes crashing the kernel when vmalloc_node()
in kcov_init() returned NULL, for kcov_init() left per-CPU irq_area == NULL
but kcov_remote_start() depends on per-CPU irq_area != NULL, resulting in
(1) doing vmalloc() in kcov_remote_start() despite !in_task() context
(2) out-of-array-bounds access if (1) succeeded but
kcov->remote_size < CONFIG_KCOV_IRQ_AREA_SIZE
(3) always leak memory allocated by (1), eventually killing all
OOM-killable userspace processes
problems.
Link: https://lore.kernel.org/43552d09-2ce2-4b19-b0d3-a2d1ab952145@I-love.SAKURA.ne.jp
Reported-by: syzbot+3f51ad7ac3ae57a6fdcc@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=3f51ad7ac3ae57a6fdcc
Reported-by: syzbot+47cf95ca1f9dcca872c8@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=47cf95ca1f9dcca872c8
Reported-by: syzbot+8a173e13208949931dc7@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=8a173e13208949931dc7
Reported-by: syzbot+90984d3713722683112e@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=90984d3713722683112e
Analyzed-by: AI Mode in Google Search (no mail address)
Fixes: 5ff3b30ab57d ("kcov: collect coverage from interrupts")
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Clark Williams <williams@redhat.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Marco Elver <elver@google.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Date: Thu Aug 27 14:35:27 2026 +0200
Linux 7.2.1
Link: https://lore.kernel.org/r/20260825132541.560541185@linuxfoundation.org
Tested-by: Ronald Warsow <rwarsow@gmx.de>
Tested-by: Justin M. Forbes <jforbes@fedoraproject.org>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Barry K. Nathan <barryn@pobox.com>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Tested-by: Brett A C Sheffield <bacs@librecast.net>
Tested-by: Miguel Ojeda <ojeda@kernel.org>
Tested-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Tested-by: Peter Schneider <pschneider1968@googlemail.com>
Tested-by: Benjamin Boortz <bennib@mailbox.org>
Tested-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Griffin Kroah-Hartman <griffin@kroah.com>
Date: Thu Jul 9 15:16:40 2026 +0200
mailbox: mchp-ipc-sbi: Add null check for devm_kasprintf()
commit b37c4d0a2fd90c0c31223acd37f763eb8953ed1a upstream.
Add a check to see if devm_kasprintf() is not NULL in
mchp_ipc_get_cluster_aggr_irq(), returning -ENOMEM if the function
failed.
Assisted-by: gkh_clanker_t1000
CC: Jassi Brar <jassisinghbrar@gmail.com>
Signed-off-by: Griffin Kroah-Hartman <griffin@kroah.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Anand Khoje <anand.a.khoje@oracle.com>
Date: Thu Aug 13 08:37:05 2026 +0000
net/ionic: avoid OOB TX partner lookup for hwstamp RXQ
commit d92255b405fb6f5acca408239ccd742e0a42c9cb upstream.
The dedicated hardware timestamp RX queue is allocated with q->index
equal to lif->ionic->nrxqs_per_lif. The normal txqcqs array only
contains the regular queue pairs, so using that index to set rxq->partner
can read one entry past txqcqs[] and then write through the derived
pointer.
Only link RX/TX partners for normal queue-pair indexes. Leave the hwstamp
RX queue unpaired, and make the XDP_TX path abort cleanly if an RX queue
has no TX partner.
Fixes: 8eeed8373e1c ("ionic: Add XDP_TX support")
Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com>
Reviewed-by: Shannon Nelson <sln@onemain.com>
Cc: stable@vger.kernel.org
Signed-off-by: Anand Khoje <anand.a.khoje@oracle.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Link: https://patch.msgid.link/20260813083705.454897-1-anand.a.khoje@oracle.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Doruk Tan Ozturk <doruk@0sec.ai>
Date: Wed Jun 3 16:13:55 2026 +0200
nfc: digital: clamp SENSF_RES length to the destination buffer
commit 344a56d7c8e0f3cbaff0bcb1bcd95a1a1db24b16 upstream.
digital_in_recv_sensf_res() memcpy()s resp->len bytes from a remote
NFC-F device response into the NFC_SENSF_RES_MAXSIZE-byte target.sensf_res
field without an upper-bound check. A nearby malicious NFC-F device can
send an oversized SENSF_RES response to overflow the stack-local struct
nfc_target.
Clamp resp->len to NFC_SENSF_RES_MAXSIZE before the copy.
Found by 0sec automated security-research tooling (https://0sec.ai).
Fixes: 8c0695e4998d ("NFC Digital: Add NFC-F technology support")
Cc: stable@vger.kernel.org
Signed-off-by: Doruk Tan Ozturk <doruk@0sec.ai>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20260603141355.68156-1-doruk@0sec.ai
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Bryam Vargas <hexlabsecurity@proton.me>
Date: Tue Jun 16 23:33:35 2026 -0500
nfc: fdp: bound the device-reported read length and fix an skb leak
commit 7ad21dcfeb5181af0c3ee2608808c0c0a5283aa1 upstream.
fdp_nci_i2c_read() takes the next packet length from two device-supplied
bytes and never validates it. The value is a u16 used as the
i2c_master_recv() count into a 261-byte on-stack buffer: a malicious,
counterfeit or malfunctioning controller (or an i2c bus interposer) can
drive it far past the buffer for a stack out-of-bounds write that
clobbers the canary and return address, or below the minimum frame size
(directly, or by truncating the computed sum) so the header/LRC strip
and the next length read run past a short receive. Reject a length
outside [FDP_NCI_I2C_MIN_PAYLOAD, FDP_NCI_I2C_MAX_PAYLOAD], as a
corrupted packet already is, and force resynchronization.
The same loop allocates one data skb per iteration and assumes a length
packet followed by a data packet; a device that sends two data packets
in one call leaks the first skb when the second allocation overwrites
it. Free a previously allocated skb before allocating the next.
Fixes: a06347c04c13 ("NFC: Add Intel Fields Peak NFC solution driver")
Cc: stable@vger.kernel.org
Suggested-by: Simon Horman <horms@kernel.org>
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Link: https://patch.msgid.link/20260616-b4-disp-b1f8ab4c-v2-1-2d1fe5955325@proton.me
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Doruk Tan Ozturk <doruk@0sec.ai>
Date: Thu Jul 9 15:12:29 2026 +0200
nfc: llcp: bound the connect_sn TLV walk to the skb
commit 55c68ac93e7dacc0f5f608b9c39dd4ff48cf28e8 upstream.
Commit 27256cdb290e ("nfc: llcp: bound SNL TLV parsing to the skb and
add length checks") fixed the unbounded TLV walk in nfc_llcp_recv_snl(),
and commit d8bd2dedbde5 ("nfc: llcp: fix OOB read and u8 offset wrap in
TLV parsers") subsequently bounded nfc_llcp_parse_gb_tlv() and
nfc_llcp_parse_connection_tlv(). One sibling parser sharing the same
pattern remains unbounded: nfc_llcp_connect_sn().
nfc_llcp_connect_sn() walks a TLV list, reading a two-byte header
(type, length) followed by length bytes of value, without checking that
the two header bytes or the declared length stay within the buffer. It
returns a pointer to a service name of up to 255 bytes that may point
past the end of the skb; it is subsequently consumed by memcmp() in
nfc_llcp_sock_from_sn(). In addition tlv_array_len was computed as
"skb->len - LLCP_HEADER_SIZE" in size_t, so a CONNECT/CC frame shorter
than the LLCP header underflows to a huge length and the walk runs far
past the buffer.
nfc_llcp_connect_sn() is reachable from nfc_llcp_recv_connect() and
nfc_llcp_recv_cc(), i.e. from received CONNECT and CC PDUs. A nearby
NFC device can reach this without authentication; LLCP link activation
happens automatically after NFC-DEP, and the nfc_llcp_rx_skb()
dispatcher applies no minimum-length guard.
Walk the TLV list by pointer, bounded by skb_tail_pointer(skb), and
validate each declared length before use, matching the approach already
used for nfc_llcp_recv_snl(). Starting the walk at
&skb->data[LLCP_HEADER_SIZE] against the tail pointer also removes the
size_t underflow for short frames.
Found by 0sec automated security-research tooling (https://0sec.ai).
Fixes: d646960f7986 ("NFC: Initial LLCP support")
Cc: stable@vger.kernel.org
Assisted-by: 0sec:claude-opus-4-8
Signed-off-by: Doruk Tan Ozturk <doruk@0sec.ai>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260709131229.44477-1-doruk@0sec.ai
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Muhammad Bilal <meatuni001@gmail.com>
Date: Mon Jun 22 18:18:02 2026 +0500
nfc: llcp: fix OOB read and u8 offset wrap in TLV parsers
commit 78b20c8eeacd2e44a2d8a4cb5316d3c521d90911 upstream.
nfc_llcp_parse_gb_tlv() and nfc_llcp_parse_connection_tlv() contain
three related bugs in their TLV parsing loops:
1. 'offset' is declared u8 but tlv_array_len is u16. When TLV data
advances offset past 255 it silently wraps to zero, causing
infinite loops or double-processing of buffer data.
2. Before reading tlv[0] (type) and tlv[1] (length) there is no
check that offset+2 <= tlv_array_len. A truncated TLV causes
an OOB read of one byte past the buffer end.
3. After reading the length field, the value bytes are accessed
without checking offset+2+length <= tlv_array_len. A crafted
length=0xFF on a short buffer causes up to 255 bytes of OOB
read past the buffer end.
Both functions are reachable without authentication via
nfc_llcp_set_remote_gb() which feeds remote LLCP general bytes
directly into nfc_llcp_parse_gb_tlv() with no additional
validation.
Fix all three issues by widening offset from u8 to u16 and adding
bounds checks for both the TLV header and value field before each
access.
Fixes: 3df40eb3a2ea ("nfc: constify several pointers to u8, char and sk_buff")
Cc: stable@vger.kernel.org
Signed-off-by: Muhammad Bilal <meatuni001@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260622131802.239035-1-meatuni001@gmail.com
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Doruk Tan Ozturk <doruk@0sec.ai>
Date: Tue Jul 14 18:46:31 2026 +0200
nfc: llcp: reject PDUs shorter than the LLCP header
commit 95674f506c6376d6722a23144c9acd26609771ed upstream.
Every LLCP PDU begins with a two-byte header (DSAP/SSAP + PTYPE), but the
receive path never checked that a frame is at least LLCP_HEADER_SIZE bytes
before parsing it.
nfc_llcp_rx_skb() reads the header via nfc_llcp_ptype()/nfc_llcp_dsap()/
nfc_llcp_ssap(), which dereference pdu->data[0] and pdu->data[1], and a
CONNECT or CC PDU then computes
tlv_array_len = skb->len - LLCP_HEADER_SIZE;
as a size_t and hands it to the TLV walk. When the frame is shorter than
the header the subtraction wraps to a huge value and the walk runs far
past the buffer, an out-of-bounds read.
A nearby NFC device can reach this without authentication; LLCP link
activation happens automatically after NFC-DEP.
Guard the common receive choke point __nfc_llcp_recv(), shared by both the
target (nfc_llcp_data_received()) and initiator (nfc_llcp_recv()) paths, so
a short skb is dropped before the rx_work worker parses it. Use
pskb_may_pull() rather than a skb->len test so the two header bytes are
guaranteed to sit in the skb linear area even for a non-linear skb,
matching how the sibling NCI and HCI receive paths validate their headers.
Reproduced with a KFENCE out-of-bounds read via /dev/virtual_nci on
linux-next.
Found by 0sec automated security-research tooling (https://0sec.ai).
Fixes: d646960f7986 ("NFC: Initial LLCP support")
Cc: stable@vger.kernel.org
Suggested-by: David Laight <david.laight.linux@gmail.com>
Signed-off-by: Doruk Tan Ozturk <doruk@0sec.ai>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20260714164631.75068-1-doruk@0sec.ai
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Pengpeng Hou <pengpeng@iscas.ac.cn>
Date: Thu Jul 23 10:37:20 2026 +0800
nfc: microread: validate target discovery payload lengths
commit 25519469972ef57c3edb1805dabd6c5612b90211 upstream.
microread_target_discovered() parses target discovery payloads from
skb->data according to the HCI gate. The fixed field offsets and UID
copies were checked only against the destination nfc_target buffers, not
against the actual skb length.
Validate that each gate-specific payload contains the fixed fields and
UID bytes before reading or copying them.
Fixes: cfad1ba87150 ("NFC: Initial support for Inside Secure microread")
Cc: stable@vger.kernel.org
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260723103508.1-microread-v2-pengpeng@iscas.ac.cn
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Bryam Vargas <hexlabsecurity@proton.me>
Date: Fri Jun 12 12:50:25 2026 -0500
nfc: nci: add data_len bound checks to activation parameter extractors
commit 0428fa2c22e2ba0cff766d3b80d461e149102045 upstream.
nci_extract_activation_params_iso_dep() and
nci_extract_activation_params_nfc_dep() read an inner length byte from
the NCI RF_INTF_ACTIVATED_NTF payload and use it to memcpy() into fixed
kernel buffers, but neither function receives the caller-validated
activation_params_len. A crafted NCI notification with
activation_params_len=1 and an inner length byte of up to 20 (NFC-A) or
50 (NFC-B) causes memcpy() to read that many bytes past the one valid
byte in the activation params region -- a slab out-of-bounds read of
kernel memory adjacent to the NCI skb.
The sibling nci_extract_rf_params_*() family was given equivalent
protection by commit 571dcbeb8e63 ("net: nfc: nci: Fix parameter
validation for packet data"), but the two activation parameter
extractors were not updated at that time.
Add a data_len parameter to both functions, guard against an empty
region before consuming the inner length byte, decrement the remaining
count after consuming it, and clamp the copy length to what is actually
available. Update both call sites to pass ntf.activation_params_len,
which is already validated against the skb at ntf.c:801.
Fixes: e8c0dacd9836 ("NFC: Update names and structs to NCI spec 1.0 d18")
Cc: stable@vger.kernel.org
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Link: https://patch.msgid.link/20260612-b4-disp-6d52d8b0-v3-1-e26221f8826d@proton.me
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Samuel Page <sam@bynar.io>
Date: Mon Jun 22 16:52:43 2026 +0200
nfc: nci: fix out-of-bounds write in nci_target_auto_activated()
commit ac200079db50af81e6b04d058b33ec92901d8edd upstream.
nci_target_auto_activated() appends a target to the fixed-size array
ndev->targets[NCI_MAX_DISCOVERED_TARGETS] and increments ndev->n_targets
without first checking the array is full; unlike its sibling
nci_add_new_target(), which bails out when n_targets already equals
NCI_MAX_DISCOVERED_TARGETS.
ndev->n_targets is only cleared by nci_clear_target_list(), so an NFCC
that repeatedly re-runs discovery (RF_DISCOVER_RSP, which re-enters
NCI_DISCOVERY without clearing the target list) and reports an
auto-activated target (RF_INTF_ACTIVATED_NTF) drives n_targets past the
limit. The append then writes a struct nfc_target past the end of the
array (a slab out-of-bounds write), and nfc_targets_found() goes on to
walk the array with the inflated count:
BUG: KASAN: slab-out-of-bounds in nci_add_new_protocol+0x94/0x2ac [nci]
Write of size 2 at addr ffff0000c7299a18 by task kworker/u8:0/12
Workqueue: nfc0_nci_rx_wq nci_rx_work [nci]
Call trace:
nci_add_new_protocol+0x94/0x2ac [nci]
nci_ntf_packet+0xddc/0x11a0 [nci]
nci_rx_work+0x15c/0x1e0 [nci]
process_one_work+0x2dc/0x500
worker_thread+0x240/0x460
kthread+0x1c0/0x1d0
ret_from_fork+0x10/0x20
The buggy address belongs to the cache kmalloc-2k of size 2048
The buggy address is located 1024 bytes to the right of
allocated 1560-byte region [ffff0000c7299000, ffff0000c7299618)
Guard nci_target_auto_activated() with the same check used by
nci_add_new_target().
Fixes: 019c4fbaa790 ("NFC: Add NCI multiple targets support")
Cc: stable@vger.kernel.org
Assisted-by: Bynario AI
Signed-off-by: Samuel Page <sam@bynar.io>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260622145243.3167276-1-sam@bynar.io
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Samuel Page <sam@bynar.io>
Date: Fri Jun 26 10:03:01 2026 +0100
nfc: nci: fix uninit-value in the RF discover/activated NTF handlers
commit 8cbe06c1e699c0a165dae5093a2550e65f914818 upstream.
nci_rf_discover_ntf_packet() and nci_rf_intf_activated_ntf_packet() each
parse a notification into an on-stack struct (nci_rf_discover_ntf /
nci_rf_intf_activated_ntf) that is not initialised. The RF
technology-specific parameters are only extracted when
rf_tech_specific_params_len is non-zero, so a notification that reports a
zero length leaves the rf_tech_specific_params union uninitialised - and
both handlers then pass it to nci_add_new_protocol(), which reads it:
- discover: nci_add_new_target() -> nci_add_new_protocol();
- activated: nci_target_auto_activated() -> nci_add_new_protocol().
nci_add_new_protocol() uses nfca_poll->nfcid1_len as both a branch
condition and a memcpy() length and copies nfcid1/sens_res/sel_res into
ndev->targets, which is later exposed to user space via NFC_CMD_GET_TARGET.
BUG: KMSAN: uninit-value in nci_add_new_protocol+0x624/0x6c0
nci_add_new_protocol+0x624/0x6c0
nci_ntf_packet+0x25b2/0x3c30
nci_rx_work+0x318/0x5d0
process_scheduled_works+0x84b/0x17a0
worker_thread+0xc10/0x11b0
kthread+0x376/0x500
Local variable ntf.i created at:
nci_ntf_packet+0xbc2/0x3c30
Zero-initialise both on-stack notifications so the union reads back as
zero when no technology-specific parameters are present.
Fixes: 019c4fbaa790 ("NFC: Add NCI multiple targets support")
Fixes: e8c0dacd9836 ("NFC: Update names and structs to NCI spec 1.0 d18")
Link: https://lore.kernel.org/netdev/20260623172109.1105965-2-horms@kernel.org/
Cc: stable@vger.kernel.org
Assisted-by: Bynario AI
Signed-off-by: Samuel Page <sam@bynar.io>
Link: https://patch.msgid.link/20260626090301.2139500-1-sam@bynar.io
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Linmao Li <lilinmao@kylinos.cn>
Date: Tue Jul 21 10:35:18 2026 +0800
nfc: nci: free destination parameters when closing a connection
commit 2e65bafdfd3a8bba972b3d17b6a57816557530fc upstream.
When a connection is closed, nci_core_conn_close_rsp_packet() frees
conn_info but not conn_info->dest_params, which is a separate devm
allocation. Each connect/close cycle leaks one dest_params until the
NFC device is removed. Free dest_params along with conn_info.
Fixes: 9b8d1a4cf2aa ("nfc: nci: Add an additional parameter to identify a connection id")
Cc: stable@vger.kernel.org
Signed-off-by: Linmao Li <lilinmao@kylinos.cn>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20260721023518.1697625-1-lilinmao@kylinos.cn
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Xu Rao <raoxu@uniontech.com>
Date: Mon Jul 20 10:14:44 2026 +0800
nfc: pn533: purge fragmented skbs during cleanup
commit 5718fc62198c38c2de5316020a90506f9e75e0bb upstream.
pn53x_common_clean() purges resp_q before freeing the common PN533 state,
but it leaves fragment_skb untouched. The fragmentation helpers queue
transmit fragments there while sending large initiator or target-mode
frames, and those skbs remain owned by the driver until they are sent or
discarded.
If the device is removed while fragments are still queued, the common
cleanup path frees the PN533 state without releasing the queued fragment
skbs, leaking them.
Purge fragment_skb during cleanup alongside resp_q.
Fixes: 963a82e07d4e ("NFC: pn533: Split large Tx frames in chunks")
Cc: stable@vger.kernel.org
Signed-off-by: Xu Rao <raoxu@uniontech.com>
Link: https://patch.msgid.link/2D896607CAE4408E+20260720021444.3362044-1-raoxu@uniontech.com
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Doruk Tan Ozturk <doruk@0sec.ai>
Date: Sat Jul 11 09:13:01 2026 +0200
nfc: st21nfca: validate ATR_REQ length against the received frame
commit 5cdcca5d62a66eda6b774110a44cba67bc1a8d1d upstream.
st21nfca_tm_recv_atr_req() checks that the received ATR_REQ frame is at
least ST21NFCA_ATR_REQ_MIN_SIZE and that the self-declared atr_req->length
is at least sizeof(struct st21nfca_atr_req), but never checks that
atr_req->length does not exceed the actual received length (skb->len).
st21nfca_tm_send_atr_res() then trusts the declared length:
gb_len = atr_req->length - sizeof(struct st21nfca_atr_req);
...
memcpy(atr_res->gbi, atr_req->gbi, gb_len);
so an RF peer that sends a short frame but sets atr_req->length larger
than the frame makes gb_len exceed the general bytes actually present,
and the memcpy reads out of bounds past the received skb. Those bytes are
placed in the ATR_RES and sent back to the peer (kernel-memory disclosure
to a proximity attacker); a larger declared length is an out-of-bounds
read (DoS).
Reject frames whose declared length exceeds the received length. The
adjacent nfc_tm_activated() path in the same function already derives its
general-bytes length from skb->len rather than the declared field.
Found by 0sec (https://0sec.ai) using automated source analysis; the
missing bound is evident from source. Compile-tested.
Fixes: 1892bf844ea0 ("NFC: st21nfca: Adding P2P support to st21nfca in Initiator & Target mode")
Cc: stable@vger.kernel.org
Assisted-by: 0sec:claude-opus-4-8
Signed-off-by: Doruk Tan Ozturk <doruk@0sec.ai>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260711071301.58071-1-doruk@0sec.ai
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Date: Fri Jul 3 01:07:19 2026 +0900
nilfs2: reject invalid block index in GC ioctl
commit a1735eae55448bc79c2da6593455791e886f6ed8 upstream.
Syzbot reported list corruption caused by a double list_add_tail() call on
bh->b_assoc_buffers within nilfs_lookup_dirty_data_buffers().
Analysis revealed that the root cause was the insertion of a page/folio
with a page index of ULONG_MAX into the page cache via the GC ioctl.
filemap_get_folios_tag(), called by nilfs_lookup_dirty_data_buffers(),
repeatedly detects a dirty folio with a page index of ULONG_MAX due to
index wrap-around, leading to duplicate processing of dirty buffers.
As a preparatory step, the GC ioctl loads the page/folio of the block to
be moved during GC and inserts it into the page cache based on information
in the nilfs_vdesc structure passed as an argument. Normally, this does
not cause issues because the user-space GC library configures the
nilfs_vdesc structure properly. However, since there is no range check on
the parameters determining the page index, a request with artificially
crafted parameters -- such as those generated by Syzbot -- can result in a
page/folio being inserted with a page index of ULONG_MAX, triggering the
above problem.
This resolves the issue by checking the ranges of 'vd_offset' and
'vd_vblocknr' in the nilfs_vdesc structure that determine the page index,
thereby preventing the invalid page/folio insertions.
Reported-by: syzbot+c37bed40868932d790e9@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=c37bed40868932d790e9
Fixes: 7942b919f732 ("nilfs2: ioctl operations")
Cc: wuyankun <wuyankun@uniontech.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Rik van Riel <riel@surriel.com>
Date: Sat Aug 8 11:42:39 2026 -0400
null_blk: fix UBSAN shift-out-of-bounds when zone_size is 0 or overflows
commit 95491fb05105b61050cb623a5e0227eb26aa3525 upstream.
null_zone_no() does sect >> ilog2(dev->zone_size_sects). When
zone_size_sects is 0, ilog2(0) returns -1, producing shift exponent -1
which UBSAN reports as shift-out-of-bounds.
UBSAN: shift-out-of-bounds in drivers/block/null_blk/zoned.c:21:14
shift exponent -1 is negative
Call Trace:
null_zone_no drivers/block/null_blk/zoned.c:21 [inline]
null_process_zoned_cmd+0xf76/0xf80 drivers/block/null_blk/zoned.c:728
null_handle_cmd drivers/block/null_blk/main.c:1455 [inline]
null_queue_rq+0x8bc/0xe70 drivers/block/null_blk/main.c:1703
__blk_mq_issue_directly block/blk-mq.c:2694 [inline]
blk_mq_try_issue_directly+0x3f4/0x880 block/blk-mq.c:2754
blk_mq_submit_bio+0x20c0/0x2a40 block/blk-mq.c:3208
submit_bio_noacct_nocheck+0x2f4/0xa40 block/blk-core.c:790
block_read_full_folio+0x7a6/0x810 fs/buffer.c:2463
filemap_read_folio+0x12c/0x3a0 mm/filemap.c:2510
read_part_sector+0xb6/0x2b0 block/partitions/core.c:724
adfspart_check_ICS+0xb1/0x960 block/partitions/acorn.c:357
check_partition block/partitions/core.c:143 [inline]
blk_add_partitions block/partitions/core.c:591 [inline]
bdev_disk_changed+0x851/0x17a0 block/partitions/core.c:695
blkdev_get_whole+0x372/0x510 block/bdev.c:751
add_disk_final block/genhd.c:412 [inline]
add_disk_fwnode+0x24b/0x3a0 block/genhd.c:606
null_add_dev+0x130b/0x1d70 drivers/block/null_blk/main.c:2052
nullb_device_power_store+0x240/0x380 drivers/block/null_blk/main.c:501
configfs_write_iter+0x337/0x430 fs/configfs/file.c:229
Syzkaller triggers this by creating a zoned null_blk device via
configfs. The Call Trace shows configfs_write_iter in configfs/file.c
handling a write to power file, which calls nullb_device_power_store in
main.c, which calls null_add_dev in main.c, which calls add_disk in
genhd.c, which triggers partition scan via bdev_disk_changed in
partitions/core.c.
A zoned null_blk device with zone_size 0 should not be legal. Existing
code tries to reject it via is_power_of_2() check in zoned.c and
!zone_size check in main.c, but syzkaller can still reach
null_zone_no() with zone_size_sects 0 via two paths:
1. Direct 0 via configfs: zone_size attribute store in main.c has
NULLB_DEVICE_ATTR(zone_size, ulong, NULL) with no validation callback,
so echo 0 > zone_size succeeds before power store. If zoned is false
at power store time, the !zone_size check in main.c is skipped, and
later zoned set true leaves zone_size 0.
2. Large value overflow: mb_to_sects() in zoned.c does
(sector_t)mb * SZ_1M >> SECTOR_SHIFT which is mb * 2048. If mb is
1UL << 53 (9PB), mb * 2048 overflows 64-bit to 0. The value is
power-of-two so is_power_of_2() passes, but mb_to_sects() returns 0.
Check for zero zone_size explicitly in null_init_zoned_dev() in
zoned.c, returning -EINVAL with "must be non-zero power-of-two".
Check for zero zone_size_sects after mb_to_sects() conversion,
returning -EINVAL for overflow case. Keep defensive check in
null_zone_no() returning 0 for zero sectors to avoid shift out-of-bounds
even if zero slips through.
This change should be safe because zone_size is set once in
null_init_zoned_dev() under device lock and never changes after, and 0
is never valid for a zoned device. Returning -EINVAL at init time fails
device creation early with clear error, while defensive return 0 in
null_zone_no() makes zoned command fail via offline zone check.
No new locking is introduced.
Reported-by: syzbot+abd6a8dca0f2b7726060@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=abd6a8dca0f2b7726060
Link: https://lore.kernel.org/all/6a75205c.01d0871a.3a0d52.0033.GAE@google.com/
Fixes: 8a3cf049af68 ("null_blk: add zoned block device emulation")
Cc: stable@vger.kernel.org
Assisted-by: Hermes:muse-spark-1.2 syzkaller
Signed-off-by: Rik van Riel <riel@surriel.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://patch.msgid.link/20260808114239.69167f68@fangorn
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Bryam Vargas <hexlabsecurity@proton.me>
Date: Thu Jul 2 03:45:14 2026 -0500
nvmet-auth: zero the AUTH_RECEIVE response buffer
commit 3ddcfb013322aa37eaa7a0d344b73079c38dfa21 upstream.
nvmet_execute_auth_receive() allocates the response buffer with kmalloc()
sized by the host-supplied AUTH_RECEIVE allocation length, but the
DH-HMAC-CHAP builders write only a fixed-size message into it. The full
allocation length is then copied to the wire by nvmet_copy_to_sgl(), so a
remote initiator receives the bytes past the built message -- up to nearly
a page of uninitialized slab -- during the pre-authentication handshake.
Allocate the buffer with kzalloc() so the unwritten tail is zeroed before
it is sent; conforming responses are unaffected.
Fixes: db1312dd9548 ("nvmet: implement basic In-Band Authentication")
Cc: stable@vger.kernel.org
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jiang HongHui <jiang_hh2019@163.com>
Date: Wed Jul 29 19:02:06 2026 +0800
nvmet-fc: fix invalid free in LS IOD error path
commit ba98d6796d12258e837ece065d2ecb59d76ce4ff upstream.
nvmet_fc_alloc_ls_iodlist() advances iod while initializing the LS IOD
array. If an rqstbuf allocation or response buffer DMA mapping fails,
the unwind loop decrements iod past the start of the array. The final
kfree(iod) therefore frees an address before the allocated object.
This can be reproduced with nvme-fcloop and failslab by setting
fail-nth to 6 before creating a target port. KASAN reports:
BUG: KASAN: invalid-free in nvmet_fc_register_targetport
Free of addr ffff88816cf8ff48 by task nvmet_fail_nth/9552
Free the original allocation base stored in tgtport->iod instead. With
this fix applied, the same sysfs write with fail-nth=6 returns -ENOMEM
without any KASAN report.
Fixes: c53432030d86 ("nvme-fabrics: Add target support for FC transport")
Cc: stable@vger.kernel.org
Reviewed-by: Maurizio Lombardi <mlombard@redhat.com>
Assisted-by: Codex:gpt-5
Signed-off-by: Jiang HongHui <jiang_hh2019@163.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Ibrahim Hashimov <security@auditcode.ai>
Date: Thu Jul 9 15:25:33 2026 +0200
nvmet-tcp: bound SGL data length before allocating command buffers
commit 4a3f00262a044e8e15064b1a6860968bf0500bf4 upstream.
nvmet_tcp_map_data() reads the host-controlled 32-bit sgl->length
and, for the in-capsule offset descriptor (type 0x01), checks it
against port->inline_data_size before use. Any other SGL descriptor
type -- including the non-inline transport SGL data-block descriptor
(type (NVME_TRANSPORT_SGL_DATA_DESC << 4) | NVME_SGL_FMT_TRANSPORT_A,
the type a real host uses for out-of-capsule writes) skips that check
entirely and falls straight through to:
cmd->req.sg = sgl_alloc(len, GFP_KERNEL, &cmd->req.sg_cnt);
with len taken directly from the wire, unbounded up to 4 GiB.
nvmet_req_init() only parses the command and never inspects
sgl->length, and nvmet_check_transfer_len() -- the only other place
transfer_len is validated -- runs later, from req->execute(), after
the allocation has already happened. For a write command the target
responds with an R2T and parks the command waiting for the host to
send the data; if the host (or an unauthenticated peer that simply
never follows up) never does, the sgl_alloc() buffer stays resident
for the life of the command. NVMe/TCP has no mandatory authentication
in the default configuration, so any peer able to reach the target
portal and complete a Fabrics connect can drive this with a single
crafted command, repeatable across queues and connections for
amplification. This is unbounded kernel memory allocation
triggered by a remote, effectively unauthenticated peer.
Validate len against the same NVMET_TCP_MAXH2CDATA ceiling this file
already uses to bound per-PDU H2C data, for every SGL descriptor type,
before doing any allocation. This closes the gap for the non-inline
descriptor while leaving the existing, tighter inline_data_size check
in place for the in-capsule case.
Runtime-verified on a v6.19 KASAN stand: with this bound in place, a
crafted write command carrying an oversized non-inline SGL length is
rejected before sgl_alloc() runs, where the same request previously
drove an unbounded ~256 MiB kernel allocation (up to 4 GiB) that
stayed resident pending an R2T the host never satisfies.
Fixes: 872d26a391da ("nvmet-tcp: add NVMe over TCP target driver")
Cc: stable@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ibrahim Hashimov <security@auditcode.ai>
Assisted-by: AuditCode-AI:2026.07
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Date: Mon Jul 27 22:03:31 2026 +0200
nvmet-tcp: Do not WARN on remotely-controlled oversized SGL allocations
commit 737a3b535247226f6e1a7988fd9d6e63e7d6fc71 upstream.
When fuzzing the nvme target code, I tripped a kernel warning in
nvmet_tcp_map_data() because the length passed into the allocator is
controlled by the remote initiator.
A remote initiator that sends a command with an SGL claiming a huge
number, can create a scatterlist and iovec allocation of over 1 million
entries, which causes the backing kmalloc call to exceed MAX_PAGE_ORDER
and then the page allocator will trip on a WARN_ON_ONCE_GFP() message:
WARNING: mm/page_alloc.c:5280 __alloc_frozen_pages_noprof
Workqueue: nvmet_tcp_wq nvmet_tcp_io_work
...
sgl_alloc_order
nvmet_tcp_map_data
nvmet_tcp_try_recv_pdu
As it's never good to trip a kernel warning remotely due to many systems
having panic-on-warn enabled, let's silence it by just add GFP_NOWARN to
the allocation flags.
Assisted-by: gkh_clanker_2000
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Guixin Liu <kanie@linux.alibaba.com>
Date: Tue Aug 4 10:18:57 2026 +0800
nvmet: fix NULL pointer dereference in nvmet_execute_identify_nslist()
commit 79aba4c9403419d822972d2851f2a96a2c0531cf upstream.
When a host issues an Identify command with CNS 07h (Active Namespace ID
List for a specific I/O Command Set), nvmet_execute_identify_nslist() is
called with match_css set. The command-set filter dereferences req->ns,
but this handler never calls nvmet_req_find_ns(), so req->ns is always
NULL (nvmet_req_init() resets it to NULL). As soon as an enabled
namespace with an NSID greater than the requested value exists,
req->ns->csi dereferences a NULL pointer and oopses.
Besides the crash, the comparison is logically wrong: to filter the list
by command set it must test the command set of the namespace being
iterated, not a single fixed value. Use the loop variable ns->csi.
Fixes: 61c9967cd634 ("nvmet: implement active command set ns list")
Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Date: Thu Jul 30 15:18:39 2026 +0900
nvmet: pci-epf: fix use-after-free in nvmet_pci_epf_exec_iod_work()
commit c9e9bb757971485b4e8414b1744507af186d72c9 upstream.
nvmet_pci_epf_exec_iod_work() submits an I/O command with req->execute()
and then waits for the command to complete and transfers the data back
to the host. This wait is not needed for commands that do not transfer
data from the device to the host. To decide whether that wait is needed,
it reads iod->data_len and iod->dma_dir after calling req->execute().
However, once req->execute() is called, the command may complete
asynchronously on another CPU. For commands that do not require a
device-to-host data transfer, nvmet_pci_epf_queue_response() calls
nvmet_pci_epf_complete_iod() directly, which can free the iod before it
reads iod->data_len and iod->dma_dir, resulting in the KFENCE use-after-
free:
BUG: KFENCE: use-after-free read in nvmet_pci_epf_exec_iod_work+0x288/0x798 [nvmet_pci_epf]
Use-after-free read at 0x00000000fdfa6d03 (in kfence-#63):
nvmet_pci_epf_exec_iod_work+0x288/0x798 [nvmet_pci_epf]
process_one_work+0x15c/0x4f0
worker_thread+0x18c/0x30c
kthread+0x130/0x140
ret_from_fork+0x10/0x20
kfence-#63: 0x00000000e3de0e71-0x00000000c938ad62, size=712, cache=kmalloc-1k
allocated by task 10 on cpu 0 at 73.995480s (0.005122s ago):
mempool_kmalloc+0x1c/0x28
mempool_alloc_noprof+0x40/0x9c
nvmet_pci_epf_poll_sqs_work+0xd4/0x344 [nvmet_pci_epf]
process_one_work+0x15c/0x4f0
worker_thread+0x18c/0x30c
kthread+0x130/0x140
ret_from_fork+0x10/0x20
freed by task 131 on cpu 3 at 73.995521s (0.008385s ago):
mempool_kfree+0x10/0x20
mempool_free+0x44/0x64
nvmet_pci_epf_free_iod+0x88/0x98 [nvmet_pci_epf]
nvmet_pci_epf_cq_work+0xfc/0x280 [nvmet_pci_epf]
process_one_work+0x15c/0x4f0
worker_thread+0x18c/0x30c
kthread+0x130/0x140
ret_from_fork+0x10/0x20
Fix this by referring to iod->data_len and iod->dma_dir before calling
req->execute(). The remaining iod accesses such as iod->status are only
reached on the device-to-host read path. In this case,
nvmet_pci_epf_queue_response() signals iod->done instead of freeing the
iod, so the iod stays valid.
Fixes: 0faa0fe6f90e ("nvmet: New NVMe PCI endpoint function target driver")
Cc: stable@vger.kernel.org
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Yifei Gao <gyf161023@gmail.com>
Date: Tue Aug 4 21:36:25 2026 +0000
nvmet: pci-epf: put CQ ref on create_cq mapping failure
commit 659ae9d02cb5d72c76f74fff7441eb8fb64d8f5c upstream.
nvmet_pci_epf_create_cq() calls nvmet_cq_create(), which takes a
reference on the controller and installs the completion queue. If the
subsequent PCI address-space mapping fails or returns a too-small partial
mapping, the function jumps to err_internal / err_unmap_queue without
calling nvmet_cq_put(). The matching put in nvmet_pci_epf_delete_cq() is
gated on NVMET_PCI_EPF_Q_LIVE, which is only set after the mapping
succeeds, so teardown never releases these references. A remote PCI host
that drives Create IO CQ commands with a failing PRP1/pci_addr therefore
leaks the CQ and a controller reference on each attempt.
Drop the CQ reference on the mapping-failure paths. The err_internal and
err_unmap_queue labels are only reachable after nvmet_cq_create() has
succeeded, so this pairs the create/put correctly.
Fixes: 0faa0fe6f90e ("nvmet: New NVMe PCI endpoint function target driver")
Cc: stable@vger.kernel.org
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Yifei Gao <gyf161023@gmail.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Ian Bridges <icb@fastmail.org>
Date: Thu Jul 23 23:57:03 2026 -0500
ocfs2: fix missing metadata reservation for large xattrs
commit 0cdc7dde00ec63ac714271fa8b2918d630b8da1a upstream.
[BUG]
lsetxattr() panics the kernel when setting a large xattr value on a
fragmented filesystem where the file already has an external xattr
block.
[CAUSE]
ocfs2_calc_xattr_set_need() never reserves metadata blocks for a new
xattr value's extent tree when the file already has an external xattr
block. The not_found path leaves meta_add at zero, so meta_ac is NULL
when ocfs2_xattr_extend_allocation() runs.
A new value root has room for a single extent record. On a fragmented
filesystem, the allocator cannot satisfy the xattr value in one
contiguous run, so each non-contiguous run requires its own extent
record. When the value root's extent list is full and meta_ac is NULL,
ocfs2_add_clusters_in_btree() returns RESTART_META, and
ocfs2_xattr_extend_allocation() hits BUG_ON(why == RESTART_META).
[FIX]
The case where no xattr block exists yet already calls
ocfs2_extend_meta_needed(&def_xv.xv.xr_list) to reserve value tree
metadata. Add the same reservation to the case where an xattr block
already exists, making the two cases consistent.
Replace the BUG_ON with a -ENOSPC return so that if RESTART_META is
returned despite the reservation, the error propagates to userspace
instead of panicking the kernel.
Link: https://lore.kernel.org/amLwn3i9tET8yhG7@dev
Fixes: a78f9f466894 ("ocfs2: make xattr extension work with new local alloc reservation.")
Signed-off-by: Ian Bridges <icb@fastmail.org>
Reported-by: syzbot+e538032956b1157914a3@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=e538032956b1157914a3
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Heming Zhao <heming.zhao@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Steffen Persvold <spersvold@gmail.com>
Date: Thu Jul 9 14:24:46 2026 +0200
PCI: host-generic: Fix NULL pointer dereference on 32-bit CAM systems
commit 008cb88edb41f3c7c8e0ed763ff9f26719830984 upstream.
On 32-bit systems the config space is too large to ioremap in one go, so
pci_ecam_create() maps each bus segment separately and relies on the
->add_bus callback (pci_ecam_add_bus) to populate the per-bus mapping in
cfg->winp[]. pci_ecam_map_bus() then uses that mapping as the base for
every config access.
The generic ECAM ops (pci_generic_ecam_ops) already provide the ->add_bus
and ->remove_bus callbacks, but the CAM (legacy) ops in pci-host-generic.c
do not. As a result, on a 32-bit host using "pci-host-cam-generic" the
per-bus mapping is never set up and the first config read dereferences a
NULL base, crashing during bus enumeration:
Unable to handle kernel NULL pointer dereference at virtual address 00000800
Oops [#1]
CPU: 0 PID: 1 Comm: swapper Not tainted 6.9.7+ #43
Hardware name: Digilent Nexys-Video-A7 RV32 (DT)
epc : pci_generic_config_read+0x40/0xb0
ra : pci_generic_config_read+0x2c/0xb0
[<c038db9c>] pci_generic_config_read+0x40/0xb0
[<c038da04>] pci_bus_read_config_dword+0x50/0xb0
[<c0391e94>] pci_bus_generic_read_dev_vendor_id+0x3c/0x1ec
[<c039245c>] pci_scan_single_device+0xa4/0x11c
[<c0392570>] pci_scan_slot+0x9c/0x23c
[<c039388c>] pci_scan_child_bus_extend+0x58/0x2f4
[<c0393db0>] pci_scan_root_bus_bridge+0x64/0xe8
[<c0393e54>] pci_host_probe+0x20/0xc8
[<c03bc6f4>] pci_host_common_probe+0x144/0x1e4
Fix this by giving the CAM ops the same ->add_bus/->remove_bus callbacks.
Since pci_ecam_add_bus() and pci_ecam_remove_bus() are static to ecam.c,
move the CAM ops definition there as pci_generic_cam_ops (mirroring
pci_generic_ecam_ops) and export it for pci-host-generic.c to reference.
Fixes: 8fe55ef23387 ("PCI: Dynamically map ECAM regions")
Signed-off-by: Steffen Persvold <spersvold@gmail.com>
[mani: removed timestamp from log]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260709122446.3151899-1-spersvold@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Abdifatah Suruur <suruurism@gmail.com>
Date: Thu Aug 13 20:47:07 2026 +0300
ptp: vmclock: prevent read-only mappings from becoming writable
commit a5edadbae57e2298a56cf7a4e774a027905a331f upstream.
vmclock_miscdev_mmap() rejects writable mappings of the shared vmclock
ABI page with -EROFS, but leaves VM_MAYWRITE set. Userspace can map the
page read-only and then upgrade it to writable with mprotect(), after
which the guest can corrupt the host-written timekeeping data (sequence
counter, UTC time, TSC offset) that the vmclock ABI defines as read-only.
Clear VM_MAYWRITE on the read-only path so the mapping cannot be
upgraded, as i915 does for its read-only objects and as fixed in drm/vc4
(CVE-2026-68445) and drm/panthor (CVE-2024-53071).
Cc: stable@vger.kernel.org
Fixes: 205032724226 ("ptp: Add support for the AMZNC10C 'vmclock' device")
Signed-off-by: Abdifatah Suruur <suruurism@gmail.com>
Link: https://patch.msgid.link/20260813174707.14809-1-suruurism@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Griffin Kroah-Hartman <griffin@kroah.com>
Date: Thu Jul 9 14:24:01 2026 +0200
rndis_host: add overflow check in rndis_rx_fixup()
commit 965a251f23ff69cfb4486974d4532e9bb551c7fc upstream.
Add an overflow check to ensure that data_offset + data_len + 8 does not
wrap, which would enable an OOB read of the USB data buffer.
Cc: Andrew Lunn <andrew+netdev@lunn.ch>
Cc: Shaoxu Liu <shaoxul@foxmail.com>
Signed-off-by: Griffin Kroah-Hartman <griffin@kroah.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/2026070900-denim-brook-52d4@gregkh
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Yun Zhou <yun.zhou@windriver.com>
Date: Thu Jul 30 17:30:02 2026 +0800
xfs: restore nofs context unconditionally in xfs_trans_roll
commit 0241ea5fb0fe86d2a673163b2f5815111aadc7f7 upstream.
When __xfs_trans_commit() fails in xfs_trans_roll(), the NOFS context
is cleared but only restored in the success path. This leaves the
error path without nofs protection, causing a circular lock dependency
between xfs_nondir_ilock_class and fs_reclaim:
CPU0 CPU1
---- ----
lock(&xfs_nondir_ilock_class);
lock(fs_reclaim);
lock(&xfs_nondir_ilock_class);
lock(fs_reclaim);
Fix this by moving xfs_trans_set_context() before the error check so
that nofs context is always restored on the new transaction.
Reported-by: syzbot+59178abfeb0ea3f0ab20@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=59178abfeb0ea3f0ab20
Fixes: a1ca658d649a ("xfs: fix incorrect context handling in xfs_trans_roll")
Cc: stable@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Yun Zhou <yun.zhou@windriver.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Hongling Zeng <zenghongling@kylinos.cn>
Date: Tue Jul 28 15:43:40 2026 +0800
xfs: validate attr entry pointer before field access
commit b7eea80be25f3334f131d52982b3131aba77b97d upstream.
xfs_attr3_leaf_verify_entry() accesses lentry/rentry fields (namelen,
valuelen) before checking if the entry pointer itself is within bounds.
If nameidx is crafted to point near the end of the buffer, these field
accesses can read out-of-bounds before the bounds check at
name_end > buf_end is performed.
Add explicit bounds checks for entry pointers before accessing their
fields. Use offsetof() to check that the start of the flexible array
member (nameval/name) is within bounds, which ensures all preceding
fields are safe to access.
Fixes: c84760659dcf2 ("xfs: check attribute leaf block structure")
Cc: <stable@vger.kernel.org> # v5.5
Signed-off-by: Hongling Zeng <zenghongling@kylinos.cn>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>