Author: Ruslan Krupitsa <krupitsarus@outlook.com>
Date: Fri Jan 2 02:53:36 2026 +0300
ALSA: hda/realtek: add HP Laptop 15s-eq1xxx mute LED quirk
[ Upstream commit 9ed7a28225af02b74f61e7880d460db49db83758 ]
HP Laptop 15s-eq1xxx with ALC236 codec does not enable the
mute LED automatically. This patch adds a quirk entry for
subsystem ID 0x8706 using the ALC236_FIXUP_HP_MUTE_LED_COEFBIT2
fixup, enabling correct mute LED behavior.
Signed-off-by: Ruslan Krupitsa <krupitsarus@outlook.com>
Link: https://patch.msgid.link/AS8P194MB112895B8EC2D87D53A876085BBBAA@AS8P194MB1128.EURP194.PROD.OUTLOOK.COM
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Tim Guttzeit <t.guttzeit@tuxedocomputers.com>
Date: Mon Jan 19 16:15:55 2026 +0100
ALSA: hda/realtek: Fix headset mic for TongFang X6AR55xU
[ Upstream commit b48fe9af1e60360baf09ca6b7a3cd6541f16e611 ]
Add a PCI quirk to enable microphone detection on the headphone jack of
TongFang X6AR55xU devices.
Signed-off-by: Tim Guttzeit <t.guttzeit@tuxedocomputers.com>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Link: https://patch.msgid.link/20260119151626.35481-1-wse@tuxedocomputers.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Werner Sembach <wse@tuxedocomputers.com>
Date: Fri Jan 23 23:12:24 2026 +0100
ALSA: hda/realtek: Really fix headset mic for TongFang X6AR55xU.
commit 1aaedafb21f38cb872d44f7608b4828a1e14e795 upstream.
Add a PCI quirk to enable microphone detection on the headphone jack of
TongFang X6AR55xU devices.
The former quirk entry did not acomplish this and is removed.
Fixes: b48fe9af1e60 ("ALSA: hda/realtek: Fix headset mic for TongFang X6AR55xU")
Signed-off-by: Tim Guttzeit <t.guttzeit@tuxedocomputers.com>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Link: https://patch.msgid.link/20260123221233.28273-1-wse@tuxedocomputers.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Thomas Weissschuh <thomas.weissschuh@linutronix.de>
Date: Wed Jan 7 11:01:49 2026 +0100
ARM: 9468/1: fix memset64() on big-endian
commit 23ea2a4c72323feb6e3e025e8a6f18336513d5ad upstream.
On big-endian systems the 32-bit low and high halves need to be swapped
for the underlying assembly implementation to work correctly.
Fixes: fd1d362600e2 ("ARM: implement memset32 & memset64")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Chris Bainbridge <chris.bainbridge@gmail.com>
Date: Mon Feb 2 20:50:33 2026 +0000
ASoC: amd: fix memory leak in acp3x pdm dma ops
[ Upstream commit 7f67ba5413f98d93116a756e7f17cd2c1d6c2bd6 ]
Fixes: 4a767b1d039a8 ("ASoC: amd: add acp3x pdm driver dma ops")
Signed-off-by: Chris Bainbridge <chris.bainbridge@gmail.com>
Link: https://patch.msgid.link/20260202205034.7697-1-chris.bainbridge@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Kery Qi <qikeyu2017@gmail.com>
Date: Wed Jan 7 23:48:37 2026 +0800
ASoC: davinci-evm: Fix reference leak in davinci_evm_probe
[ Upstream commit 5b577d214fcc109707bcb77b4ae72a31cfd86798 ]
The davinci_evm_probe() function calls of_parse_phandle() to acquire
device nodes for "ti,audio-codec" and "ti,mcasp-controller". These
functions return device nodes with incremented reference counts.
However, in several error paths (e.g., when the second of_parse_phandle(),
snd_soc_of_parse_card_name(), or devm_snd_soc_register_card() fails),
the function returns directly without releasing the acquired nodes,
leading to reference leaks.
This patch adds an error handling path 'err_put' to properly release
the device nodes using of_node_put() and clean up the pointers when
an error occurs.
Signed-off-by: Kery Qi <qikeyu2017@gmail.com>
Link: https://patch.msgid.link/20260107154836.1521-2-qikeyu2017@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dimitrios Katsaros <patcherwork@gmail.com>
Date: Tue Jan 13 11:58:46 2026 +0100
ASoC: tlv320adcx140: Propagate error codes during probe
[ Upstream commit d89aad92cfd15edbd704746f44c98fe687f9366f ]
When scanning for the reset pin, we could get an -EPROBE_DEFER.
The driver would assume that no reset pin had been defined,
which would mean that the chip would never be powered.
Now we both respect any error we get from devm_gpiod_get_optional.
We also now properly report the missing GPIO definition when
'gpio_reset' is NULL.
Signed-off-by: Dimitrios Katsaros <patcherwork@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://patch.msgid.link/20260113-sound-soc-codecs-tvl320adcx140-v4-3-8f7ecec525c8@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Carlos Llamas <cmllamas@google.com>
Date: Fri Jan 23 17:57:02 2026 +0000
binder: fix BR_FROZEN_REPLY error log
commit 1769f90e5ba2a6d24bb46b85da33fe861c68f005 upstream.
The error logging for failed transactions is misleading as it always
reports "dead process or thread" even when the target is actually
frozen. Additionally, the pid and tid are reversed which can further
confuse debugging efforts. Fix both issues.
Cc: stable@kernel.org
Cc: Steven Moreland <smoreland@google.com>
Fixes: a15dac8b2286 ("binder: additional transaction error logs")
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20260123175702.2154348-1-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Carlos Llamas <cmllamas@google.com>
Date: Tue Jan 27 23:55:11 2026 +0000
binderfs: fix ida_alloc_max() upper bound
commit ec4ddc90d201d09ef4e4bef8a2c6d9624525ad68 upstream.
The 'max' argument of ida_alloc_max() takes the maximum valid ID and not
the "count". Using an ID of BINDERFS_MAX_MINOR (1 << 20) for dev->minor
would exceed the limits of minor numbers (20-bits). Fix this off-by-one
error by subtracting 1 from the 'max'.
Cc: stable@vger.kernel.org
Fixes: 3ad20fe393b3 ("binder: implement binderfs")
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Link: https://patch.msgid.link/20260127235545.2307876-2-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: shechenglong <shechenglong@xfusion.com>
Date: Sun Dec 28 21:04:26 2025 +0800
block,bfq: fix aux stat accumulation destination
[ Upstream commit 04bdb1a04d8a2a89df504c1e34250cd3c6e31a1c ]
Route bfqg_stats_add_aux() time accumulation into the destination
stats object instead of the source, aligning with other stat fields.
Reviewed-by: Yu Kuai <yukuai@fnnas.com>
Signed-off-by: shechenglong <shechenglong@xfusion.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Filipe Manana <fdmanana@suse.com>
Date: Fri Dec 12 17:18:25 2025 +0000
btrfs: fix reservation leak in some error paths when inserting inline extent
[ Upstream commit c1c050f92d8f6aac4e17f7f2230160794fceef0c ]
If we fail to allocate a path or join a transaction, we return from
__cow_file_range_inline() without freeing the reserved qgroup data,
resulting in a leak. Fix this by ensuring we call btrfs_qgroup_free_data()
in such cases.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Junrui Luo <moonafterrain@outlook.com>
Date: Thu Jan 29 00:55:13 2026 +0800
dpaa2-switch: add bounds check for if_id in IRQ handler
[ Upstream commit 31a7a0bbeb006bac2d9c81a2874825025214b6d8 ]
The IRQ handler extracts if_id from the upper 16 bits of the hardware
status register and uses it to index into ethsw->ports[] without
validation. Since if_id can be any 16-bit value (0-65535) but the ports
array is only allocated with sw_attr.num_ifs elements, this can lead to
an out-of-bounds read potentially.
Add a bounds check before accessing the array, consistent with the
existing validation in dpaa2_switch_rx().
Reported-by: Yuhao Jiang <danisjiang@gmail.com>
Reported-by: Junrui Luo <moonafterrain@outlook.com>
Fixes: 24ab724f8a46 ("dpaa2-switch: use the port index in the IRQ handler")
Signed-off-by: Junrui Luo <moonafterrain@outlook.com>
Link: https://patch.msgid.link/SYBPR01MB7881D420AB43FF1A227B84AFAF91A@SYBPR01MB7881.ausprd01.prod.outlook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Junrui Luo <moonafterrain@outlook.com>
Date: Wed Jan 28 16:07:34 2026 +0800
dpaa2-switch: prevent ZERO_SIZE_PTR dereference when num_ifs is zero
[ Upstream commit ed48a84a72fefb20a82dd90a7caa7807e90c6f66 ]
The driver allocates arrays for ports, FDBs, and filter blocks using
kcalloc() with ethsw->sw_attr.num_ifs as the element count. When the
device reports zero interfaces (either due to hardware configuration
or firmware issues), kcalloc(0, ...) returns ZERO_SIZE_PTR (0x10)
instead of NULL.
Later in dpaa2_switch_probe(), the NAPI initialization unconditionally
accesses ethsw->ports[0]->netdev, which attempts to dereference
ZERO_SIZE_PTR (address 0x10), resulting in a kernel panic.
Add a check to ensure num_ifs is greater than zero after retrieving
device attributes. This prevents the zero-sized allocations and
subsequent invalid pointer dereference.
Reported-by: Yuhao Jiang <danisjiang@gmail.com>
Reported-by: Junrui Luo <moonafterrain@outlook.com>
Fixes: 0b1b71370458 ("staging: dpaa2-switch: handle Rx path on control interface")
Signed-off-by: Junrui Luo <moonafterrain@outlook.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/SYBPR01MB7881BEABA8DA896947962470AF91A@SYBPR01MB7881.ausprd01.prod.outlook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jacob Keller <jacob.e.keller@intel.com>
Date: Mon Feb 2 16:16:39 2026 -0800
drm/mgag200: fix mgag200_bmc_stop_scanout()
[ Upstream commit 0e0c8f4d16de92520623aa1ea485cadbf64e6929 ]
The mgag200_bmc_stop_scanout() function is called by the .atomic_disable()
handler for the MGA G200 VGA BMC encoder. This function performs a few
register writes to inform the BMC of an upcoming mode change, and then
polls to wait until the BMC actually stops.
The polling is implemented using a busy loop with udelay() and an iteration
timeout of 300, resulting in the function blocking for 300 milliseconds.
The function gets called ultimately by the output_poll_execute work thread
for the DRM output change polling thread of the mgag200 driver:
kworker/0:0-mm_ 3528 [000] 4555.315364:
ffffffffaa0e25b3 delay_halt.part.0+0x33
ffffffffc03f6188 mgag200_bmc_stop_scanout+0x178
ffffffffc087ae7a disable_outputs+0x12a
ffffffffc087c12a drm_atomic_helper_commit_tail+0x1a
ffffffffc03fa7b6 mgag200_mode_config_helper_atomic_commit_tail+0x26
ffffffffc087c9c1 commit_tail+0x91
ffffffffc087d51b drm_atomic_helper_commit+0x11b
ffffffffc0509694 drm_atomic_commit+0xa4
ffffffffc05105e8 drm_client_modeset_commit_atomic+0x1e8
ffffffffc0510ce6 drm_client_modeset_commit_locked+0x56
ffffffffc0510e24 drm_client_modeset_commit+0x24
ffffffffc088a743 __drm_fb_helper_restore_fbdev_mode_unlocked+0x93
ffffffffc088a683 drm_fb_helper_hotplug_event+0xe3
ffffffffc050f8aa drm_client_dev_hotplug+0x9a
ffffffffc088555a output_poll_execute+0x29a
ffffffffa9b35924 process_one_work+0x194
ffffffffa9b364ee worker_thread+0x2fe
ffffffffa9b3ecad kthread+0xdd
ffffffffa9a08549 ret_from_fork+0x29
On a server running ptp4l with the mgag200 driver loaded, we found that
ptp4l would sometimes get blocked from execution because of this busy
waiting loop.
Every so often, approximately once every 20 minutes -- though with large
variance -- the output_poll_execute() thread would detect some sort of
change that required performing a hotplug event which results in attempting
to stop the BMC scanout, resulting in a 300msec delay on one CPU.
On this system, ptp4l was pinned to a single CPU. When the
output_poll_execute() thread ran on that CPU, it blocked ptp4l from
executing for its 300 millisecond duration.
This resulted in PTP service disruptions such as failure to send a SYNC
message on time, failure to handle ANNOUNCE messages on time, and clock
check warnings from the application. All of this despite the application
being configured with FIFO_RT and a higher priority than the background
workqueue tasks. (However, note that the kernel did not use
CONFIG_PREEMPT...)
It is unclear if the event is due to a faulty VGA connection, another bug,
or actual events causing a change in the connection. At least on the system
under test it is not a one-time event and consistently causes disruption to
the time sensitive applications.
The function has some helpful comments explaining what steps it is
attempting to take. In particular, step 3a and 3b are explained as such:
3a - The third step is to verify if there is an active scan. We are
waiting on a 0 on remhsyncsts (<XSPAREREG<0>.
3b - This step occurs only if the remove is actually scanning. We are
waiting for the end of the frame which is a 1 on remvsyncsts
(<XSPAREREG<1>).
The actual steps 3a and 3b are implemented as while loops with a
non-sleeping udelay(). The first step iterates while the tmp value at
position 0 is *not* set. That is, it keeps iterating as long as the bit is
zero. If the bit is already 0 (because there is no active scan), it will
iterate the entire 300 attempts which wastes 300 milliseconds in total.
This is opposite of what the description claims.
The step 3b logic only executes if we do not iterate over the entire 300
attempts in the first loop. If it does trigger, it is trying to check and
wait for a 1 on the remvsyncsts. However, again the condition is actually
inverted and it will loop as long as the bit is 1, stopping once it hits
zero (rather than the explained attempt to wait until we see a 1).
Worse, both loops are implemented using non-sleeping waits which spin
instead of allowing the scheduler to run other processes. If the kernel is
not configured to allow arbitrary preemption, it will waste valuable CPU
time doing nothing.
There does not appear to be any documentation for the BMC register
interface, beyond what is in the comments here. It seems more probable that
the comment here is correct and the implementation accidentally got
inverted from the intended logic.
Reading through other DRM driver implementations, it does not appear that
the .atomic_enable or .atomic_disable handlers need to delay instead of
sleep. For example, the ast_astdp_encoder_helper_atomic_disable() function
calls ast_dp_set_phy_sleep() which uses msleep(). The "atomic" in the name
is referring to the atomic modesetting support, which is the support to
enable atomic configuration from userspace, and not to the "atomic context"
of the kernel. There is no reason to use udelay() here if a sleep would be
sufficient.
Replace the while loops with a read_poll_timeout() based implementation
that will sleep between iterations, and which stops polling once the
condition is met (instead of looping as long as the condition is met). This
aligns with the commented behavior and avoids blocking on the CPU while
doing nothing.
Note the RREG_DAC is implemented using a statement expression to allow
working properly with the read_poll_timeout family of functions. The other
RREG_<TYPE> macros ought to be cleaned up to have better semantics, and
several places in the mgag200 driver could make use of RREG_DAC or similar
RREG_* macros should likely be cleaned up for better semantics as well, but
that task has been left as a future cleanup for a non-bugfix.
Fixes: 414c45310625 ("mgag200: initial g200se driver (v2)")
Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260202-jk-mgag200-fix-bad-udelay-v2-1-ce1e9665987d@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Max Yuan <maxyuan@google.com>
Date: Sat Feb 7 14:15:27 2026 -0500
gve: Correct ethtool rx_dropped calculation
[ Upstream commit c7db85d579a1dccb624235534508c75fbf2dfe46 ]
The gve driver's "rx_dropped" statistic, exposed via `ethtool -S`,
incorrectly includes `rx_buf_alloc_fail` counts. These failures
represent an inability to allocate receive buffers, not true packet
drops where a received packet is discarded. This misrepresentation can
lead to inaccurate diagnostics.
This patch rectifies the ethtool "rx_dropped" calculation. It removes
`rx_buf_alloc_fail` from the total and adds `xdp_tx_errors` and
`xdp_redirect_errors`, which represent legitimate packet drops within
the XDP path.
Cc: stable@vger.kernel.org
Fixes: 433e274b8f7b ("gve: Add stats for gve.")
Signed-off-by: Max Yuan <maxyuan@google.com>
Reviewed-by: Jordan Rhee <jordanrhee@google.com>
Reviewed-by: Joshua Washington <joshwash@google.com>
Reviewed-by: Matt Olson <maolson@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260202193925.3106272-3-hramamurthy@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ Context + variable naming ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Debarghya Kundu <debarghyak@google.com>
Date: Sat Feb 7 12:43:39 2026 -0500
gve: Fix stats report corruption on queue count change
[ Upstream commit 7b9ebcce0296e104a0d82a6b09d68564806158ff ]
The driver and the NIC share a region in memory for stats reporting.
The NIC calculates its offset into this region based on the total size
of the stats region and the size of the NIC's stats.
When the number of queues is changed, the driver's stats region is
resized. If the queue count is increased, the NIC can write past
the end of the allocated stats region, causing memory corruption.
If the queue count is decreased, there is a gap between the driver
and NIC stats, leading to incorrect stats reporting.
This change fixes the issue by allocating stats region with maximum
size, and the offset calculation for NIC stats is changed to match
with the calculation of the NIC.
Cc: stable@vger.kernel.org
Fixes: 24aeb56f2d38 ("gve: Add Gvnic stats AQ command and ethtool show/set-priv-flags.")
Signed-off-by: Debarghya Kundu <debarghyak@google.com>
Reviewed-by: Joshua Washington <joshwash@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260202193925.3106272-2-hramamurthy@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ gve_num_tx_queues() => priv->tx_cfg.num_queues and no stopped queues ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Kang Chen <k.chen@smail.nju.edu.cn>
Date: Tue Sep 9 11:13:16 2025 +0800
hfsplus: fix slab-out-of-bounds read in hfsplus_uni2asc()
commit bea3e1d4467bcf292c8e54f080353d556d355e26 upstream.
BUG: KASAN: slab-out-of-bounds in hfsplus_uni2asc+0xa71/0xb90 fs/hfsplus/unicode.c:186
Read of size 2 at addr ffff8880289ef218 by task syz.6.248/14290
CPU: 0 UID: 0 PID: 14290 Comm: syz.6.248 Not tainted 6.16.4 #1 PREEMPT(full)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x116/0x1b0 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0xca/0x5f0 mm/kasan/report.c:482
kasan_report+0xca/0x100 mm/kasan/report.c:595
hfsplus_uni2asc+0xa71/0xb90 fs/hfsplus/unicode.c:186
hfsplus_listxattr+0x5b6/0xbd0 fs/hfsplus/xattr.c:738
vfs_listxattr+0xbe/0x140 fs/xattr.c:493
listxattr+0xee/0x190 fs/xattr.c:924
filename_listxattr fs/xattr.c:958 [inline]
path_listxattrat+0x143/0x360 fs/xattr.c:988
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xcb/0x4c0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fe0e9fae16d
Code: 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fe0eae67f98 EFLAGS: 00000246 ORIG_RAX: 00000000000000c3
RAX: ffffffffffffffda RBX: 00007fe0ea205fa0 RCX: 00007fe0e9fae16d
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000200000000000
RBP: 00007fe0ea0480f0 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007fe0ea206038 R14: 00007fe0ea205fa0 R15: 00007fe0eae48000
</TASK>
Allocated by task 14290:
kasan_save_stack+0x24/0x50 mm/kasan/common.c:47
kasan_save_track+0x14/0x30 mm/kasan/common.c:68
poison_kmalloc_redzone mm/kasan/common.c:377 [inline]
__kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:394
kasan_kmalloc include/linux/kasan.h:260 [inline]
__do_kmalloc_node mm/slub.c:4333 [inline]
__kmalloc_noprof+0x219/0x540 mm/slub.c:4345
kmalloc_noprof include/linux/slab.h:909 [inline]
hfsplus_find_init+0x95/0x1f0 fs/hfsplus/bfind.c:21
hfsplus_listxattr+0x331/0xbd0 fs/hfsplus/xattr.c:697
vfs_listxattr+0xbe/0x140 fs/xattr.c:493
listxattr+0xee/0x190 fs/xattr.c:924
filename_listxattr fs/xattr.c:958 [inline]
path_listxattrat+0x143/0x360 fs/xattr.c:988
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xcb/0x4c0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
When hfsplus_uni2asc is called from hfsplus_listxattr,
it actually passes in a struct hfsplus_attr_unistr*.
The size of the corresponding structure is different from that of hfsplus_unistr,
so the previous fix (94458781aee6) is insufficient.
The pointer on the unicode buffer is still going beyond the allocated memory.
This patch introduces two warpper functions hfsplus_uni2asc_xattr_str and
hfsplus_uni2asc_str to process two unicode buffers,
struct hfsplus_attr_unistr* and struct hfsplus_unistr* respectively.
When ustrlen value is bigger than the allocated memory size,
the ustrlen value is limited to an safe size.
Fixes: 94458781aee6 ("hfsplus: fix slab-out-of-bounds read in hfsplus_uni2asc()")
Signed-off-by: Kang Chen <k.chen@smail.nju.edu.cn>
Reviewed-by: Viacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
Link: https://lore.kernel.org/r/20250909031316.1647094-1-k.chen@smail.nju.edu.cn
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: Jianqiang kang <jianqkang@sina.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Rodrigo Lugathe da Conceição Alves <lugathe2@gmail.com>
Date: Thu Nov 27 19:03:57 2025 -0300
HID: Apply quirk HID_QUIRK_ALWAYS_POLL to Edifier QR30 (2d99:a101)
[ Upstream commit 85a866809333cd2bf8ddac93d9a3e3ba8e4f807d ]
The USB speaker has a bug that causes it to reboot when changing the
brightness using the physical knob.
Add a new vendor and product ID entry in hid-ids.h, and register
the corresponding device in hid-quirks.c with the required quirk.
Signed-off-by: Rodrigo Lugathe da Conceição Alves <lugathe2@gmail.com>
Reviewed-by: Terry Junge <linuxhid@cosmicgizmosystems.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Kwok Kin Ming <kenkinming2002@gmail.com>
Date: Thu Jan 1 02:18:26 2026 +0800
HID: i2c-hid: fix potential buffer overflow in i2c_hid_get_report()
[ Upstream commit 2497ff38c530b1af0df5130ca9f5ab22c5e92f29 ]
`i2c_hid_xfer` is used to read `recv_len + sizeof(__le16)` bytes of data
into `ihid->rawbuf`.
The former can come from the userspace in the hidraw driver and is only
bounded by HID_MAX_BUFFER_SIZE(16384) by default (unless we also set
`max_buffer_size` field of `struct hid_ll_driver` which we do not).
The latter has size determined at runtime by the maximum size of
different report types you could receive on any particular device and
can be a much smaller value.
Fix this by truncating `recv_len` to `ihid->bufsize - sizeof(__le16)`.
The impact is low since access to hidraw devices requires root.
Signed-off-by: Kwok Kin Ming <kenkinming2002@gmail.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Zhang Lixu <lixu.zhang@intel.com>
Date: Fri Dec 12 10:51:50 2025 +0800
HID: intel-ish-hid: Reset enum_devices_done before enumeration
[ Upstream commit 56e230723e3a818373bd62331bccb1c6d2b3881b ]
Some systems have enabled ISH without any sensors. In this case sending
HOSTIF_DM_ENUM_DEVICES results in 0 sensors. This triggers ISH hardware
reset on subsequent enumeration after S3/S4 resume.
The enum_devices_done flag was not reset before sending the
HOSTIF_DM_ENUM_DEVICES command. On subsequent enumeration calls (such as
after S3/S4 resume), this flag retains its previous true value, causing the
wait loop to be skipped and returning prematurely to hid_ishtp_cl_init().
If 0 HID devices are found, hid_ishtp_cl_init() skips getting HID device
descriptors and sets init_done to true. When the delayed enumeration
response arrives with init_done already true, the driver treats it as a bad
packet and triggers an ISH hardware reset.
Set enum_devices_done to false before sending the enumeration command,
consistent with similar functions like ishtp_get_hid_descriptor() and
ishtp_get_report_descriptor() which reset their respective flags.
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Zhang Lixu <lixu.zhang@intel.com>
Date: Wed Dec 10 10:53:28 2025 +0800
HID: intel-ish-hid: Update ishtp bus match to support device ID table
[ Upstream commit daeed86b686855adda79f13729e0c9b0530990be ]
The ishtp_cl_bus_match() function previously only checked the first entry
in the driver's device ID table. Update it to iterate over the entire
table, allowing proper matching for drivers with multiple supported
protocol GUIDs.
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: DaytonCL <artem749507@gmail.com>
Date: Sun Dec 14 14:34:36 2025 +0100
HID: multitouch: add MT_QUIRK_STICKY_FINGERS to MT_CLS_VTL
[ Upstream commit ff3f234ff1dcd6d626a989151db067a1b7f0f215 ]
Some VTL-class touchpads (e.g. TOPS0102:00 35CC:0104) intermittently
fail to release a finger contact. A previous slot remains logically
active, accompanied by stale BTN_TOOL_DOUBLETAP state, causing
gestures to stay latched and resulting in stuck two-finger
scrolling and false right-clicks.
Apply MT_QUIRK_STICKY_FINGERS to handle the unreleased contact correctly.
Link: https://gitlab.freedesktop.org/libinput/libinput/-/issues/1225
Suggested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Tested-by: DaytonCL <artem749507@gmail.com>
Signed-off-by: DaytonCL <artem749507@gmail.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Siarhei Vishniakou <svv@google.com>
Date: Tue Nov 11 15:45:19 2025 -0800
HID: playstation: Center initial joystick axes to prevent spurious events
[ Upstream commit e9143268d259d98e111a649affa061acb8e13c5b ]
When a new PlayStation gamepad (DualShock 4 or DualSense) is initialized,
the input subsystem sets the default value for its absolute axes (e.g.,
ABS_X, ABS_Y) to 0.
However, the hardware's actual neutral/resting state for these joysticks
is 128 (0x80). This creates a mismatch.
When the first HID report arrives from the device, the driver sees the
resting value of 128. The kernel compares this to its initial state of 0
and incorrectly interprets this as a delta (0 -> 128). Consequently, it
generates EV_ABS events for this initial, non-existent movement.
This behavior can fail userspace 'sanity check' tests (e.g., in
Android CTS) that correctly assert no motion events should be generated
from a device that is already at rest.
This patch fixes the issue by explicitly setting the initial value of the
main joystick axes (e.g., ABS_X, ABS_Y, ABS_RX, ABS_RY) to 128 (0x80)
in the common ps_gamepad_create() function.
This aligns the kernel's initial state with the hardware's expected
neutral state, ensuring that the first report (at 128) produces no
delta and thus, no spurious event.
Signed-off-by: Siarhei Vishniakou <svv@google.com>
Reviewed-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Chris Chiu <chris.chiu@canonical.com>
Date: Fri Jan 2 06:56:43 2026 +0000
HID: quirks: Add another Chicony HP 5MP Cameras to hid_ignore_list
[ Upstream commit c06bc3557542307b9658fbd43cc946a14250347b ]
Another Chicony Electronics HP 5MP Camera with USB ID 04F2:B882
reports a HID sensor interface that is not actually implemented.
Add the device to the HID ignore list so the bogus sensor is never
exposed to userspace. Then the system won't hang when runtime PM
tries to wake the unresponsive device.
Signed-off-by: Chris Chiu <chris.chiu@canonical.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Arnd Bergmann <arnd@arndb.de>
Date: Tue Feb 3 17:34:36 2026 +0100
hwmon: (occ) Mark occ_init_attribute() as __printf
[ Upstream commit 831a2b27914cc880130ffe8fb8d1e65a5324d07f ]
This is a printf-style function, which gcc -Werror=suggest-attribute=format
correctly points out:
drivers/hwmon/occ/common.c: In function 'occ_init_attribute':
drivers/hwmon/occ/common.c:761:9: error: function 'occ_init_attribute' might be a candidate for 'gnu_printf' format attribute [-Werror=suggest-attribute=format]
Add the attribute to avoid this warning and ensure any incorrect
format strings are detected here.
Fixes: 744c2fe950e9 ("hwmon: (occ) Rework attribute registration for stack usage")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20260203163440.2674340-1-arnd@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Lu Baolu <baolu.lu@linux.intel.com>
Date: Wed Oct 22 16:26:27 2025 +0800
iommu: disable SVA when CONFIG_X86 is set
commit 72f98ef9a4be30d2a60136dd6faee376f780d06c upstream.
Patch series "Fix stale IOTLB entries for kernel address space", v7.
This proposes a fix for a security vulnerability related to IOMMU Shared
Virtual Addressing (SVA). In an SVA context, an IOMMU can cache kernel
page table entries. When a kernel page table page is freed and
reallocated for another purpose, the IOMMU might still hold stale,
incorrect entries. This can be exploited to cause a use-after-free or
write-after-free condition, potentially leading to privilege escalation or
data corruption.
This solution introduces a deferred freeing mechanism for kernel page
table pages, which provides a safe window to notify the IOMMU to
invalidate its caches before the page is reused.
This patch (of 8):
In the IOMMU Shared Virtual Addressing (SVA) context, the IOMMU hardware
shares and walks the CPU's page tables. The x86 architecture maps the
kernel's virtual address space into the upper portion of every process's
page table. Consequently, in an SVA context, the IOMMU hardware can walk
and cache kernel page table entries.
The Linux kernel currently lacks a notification mechanism for kernel page
table changes, specifically when page table pages are freed and reused.
The IOMMU driver is only notified of changes to user virtual address
mappings. This can cause the IOMMU's internal caches to retain stale
entries for kernel VA.
Use-After-Free (UAF) and Write-After-Free (WAF) conditions arise when
kernel page table pages are freed and later reallocated. The IOMMU could
misinterpret the new data as valid page table entries. The IOMMU might
then walk into attacker-controlled memory, leading to arbitrary physical
memory DMA access or privilege escalation. This is also a
Write-After-Free issue, as the IOMMU will potentially continue to write
Accessed and Dirty bits to the freed memory while attempting to walk the
stale page tables.
Currently, SVA contexts are unprivileged and cannot access kernel
mappings. However, the IOMMU will still walk kernel-only page tables all
the way down to the leaf entries, where it realizes the mapping is for the
kernel and errors out. This means the IOMMU still caches these
intermediate page table entries, making the described vulnerability a real
concern.
Disable SVA on x86 architecture until the IOMMU can receive notification
to flush the paging cache before freeing the CPU kernel page table pages.
Link: https://lkml.kernel.org/r/20251022082635.2462433-1-baolu.lu@linux.intel.com
Link: https://lkml.kernel.org/r/20251022082635.2462433-2-baolu.lu@linux.intel.com
Fixes: 26b25a2b98e4 ("iommu: Bind process address spaces to devices")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Jean-Philippe Brucker <jean-philippe@linaro.org>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robin Murohy <robin.murphy@arm.com>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: "Uladzislau Rezki (Sony)" <urezki@gmail.com>
Cc: Vasant Hegde <vasant.hegde@amd.com>
Cc: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Cc: Yi Lai <yi1.lai@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[ The context change is due to the commit
be51b1d6bbff ("iommu/sva: Refactoring iommu_sva_bind/unbind_device()")
and the commit 757636ed2607 ("iommu: Rename iommu-sva-lib.{c,h}")
in v6.2 which are irrelevant to the logic of this patch. ]
Signed-off-by: Rahul Sharma <black.hawk@163.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Sean Christopherson <seanjc@google.com>
Date: Tue Jan 13 09:46:05 2026 -0800
KVM: Don't clobber irqfd routing type when deassigning irqfd
commit b4d37cdb77a0015f51fee083598fa227cc07aaf1 upstream.
When deassigning a KVM_IRQFD, don't clobber the irqfd's copy of the IRQ's
routing entry as doing so breaks kvm_arch_irq_bypass_del_producer() on x86
and arm64, which explicitly look for KVM_IRQ_ROUTING_MSI. Instead, to
handle a concurrent routing update, verify that the irqfd is still active
before consuming the routing information. As evidenced by the x86 and
arm64 bugs, and another bug in kvm_arch_update_irqfd_routing() (see below),
clobbering the entry type without notifying arch code is surprising and
error prone.
As a bonus, checking that the irqfd is active provides a convenient
location for documenting _why_ KVM must not consume the routing entry for
an irqfd that is in the process of being deassigned: once the irqfd is
deleted from the list (which happens *before* the eventfd is detached), it
will no longer receive updates via kvm_irq_routing_update(), and so KVM
could deliver an event using stale routing information (relative to
KVM_SET_GSI_ROUTING returning to userspace).
As an even better bonus, explicitly checking for the irqfd being active
fixes a similar bug to the one the clobbering is trying to prevent: if an
irqfd is deactivated, and then its routing is changed,
kvm_irq_routing_update() won't invoke kvm_arch_update_irqfd_routing()
(because the irqfd isn't in the list). And so if the irqfd is in bypass
mode, IRQs will continue to be posted using the old routing information.
As for kvm_arch_irq_bypass_del_producer(), clobbering the routing type
results in KVM incorrectly keeping the IRQ in bypass mode, which is
especially problematic on AMD as KVM tracks IRQs that are being posted to
a vCPU in a list whose lifetime is tied to the irqfd.
Without the help of KASAN to detect use-after-free, the most common
sympton on AMD is a NULL pointer deref in amd_iommu_update_ga() due to
the memory for irqfd structure being re-allocated and zeroed, resulting
in irqfd->irq_bypass_data being NULL when read by
avic_update_iommu_vcpu_affinity():
BUG: kernel NULL pointer dereference, address: 0000000000000018
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 40cf2b9067 P4D 40cf2b9067 PUD 408362a067 PMD 0
Oops: Oops: 0000 [#1] SMP
CPU: 6 UID: 0 PID: 40383 Comm: vfio_irq_test
Tainted: G U W O 6.19.0-smp--5dddc257e6b2-irqfd #31 NONE
Tainted: [U]=USER, [W]=WARN, [O]=OOT_MODULE
Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 34.78.2-0 09/05/2025
RIP: 0010:amd_iommu_update_ga+0x19/0xe0
Call Trace:
<TASK>
avic_update_iommu_vcpu_affinity+0x3d/0x90 [kvm_amd]
__avic_vcpu_load+0xf4/0x130 [kvm_amd]
kvm_arch_vcpu_load+0x89/0x210 [kvm]
vcpu_load+0x30/0x40 [kvm]
kvm_arch_vcpu_ioctl_run+0x45/0x620 [kvm]
kvm_vcpu_ioctl+0x571/0x6a0 [kvm]
__se_sys_ioctl+0x6d/0xb0
do_syscall_64+0x6f/0x9d0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x46893b
</TASK>
---[ end trace 0000000000000000 ]---
If AVIC is inhibited when the irfd is deassigned, the bug will manifest as
list corruption, e.g. on the next irqfd assignment.
list_add corruption. next->prev should be prev (ffff8d474d5cd588),
but was 0000000000000000. (next=ffff8d8658f86530).
------------[ cut here ]------------
kernel BUG at lib/list_debug.c:31!
Oops: invalid opcode: 0000 [#1] SMP
CPU: 128 UID: 0 PID: 80818 Comm: vfio_irq_test
Tainted: G U W O 6.19.0-smp--f19dc4d680ba-irqfd #28 NONE
Tainted: [U]=USER, [W]=WARN, [O]=OOT_MODULE
Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 34.78.2-0 09/05/2025
RIP: 0010:__list_add_valid_or_report+0x97/0xc0
Call Trace:
<TASK>
avic_pi_update_irte+0x28e/0x2b0 [kvm_amd]
kvm_pi_update_irte+0xbf/0x190 [kvm]
kvm_arch_irq_bypass_add_producer+0x72/0x90 [kvm]
irq_bypass_register_consumer+0xcd/0x170 [irqbypass]
kvm_irqfd+0x4c6/0x540 [kvm]
kvm_vm_ioctl+0x118/0x5d0 [kvm]
__se_sys_ioctl+0x6d/0xb0
do_syscall_64+0x6f/0x9d0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
</TASK>
---[ end trace 0000000000000000 ]---
On Intel and arm64, the bug is less noisy, as the end result is that the
device keeps posting IRQs to the vCPU even after it's been deassigned.
Note, the worst of the breakage can be traced back to commit cb210737675e
("KVM: Pass new routing entries and irqfd when updating IRTEs"), as before
that commit KVM would pull the routing information from the per-VM routing
table. But as above, similar bugs have existed since support for IRQ
bypass was added. E.g. if a routing change finished before irq_shutdown()
invoked kvm_arch_irq_bypass_del_producer(), VMX and SVM would see stale
routing information and potentially leave the irqfd in bypass mode.
Alternatively, x86 could be fixed by explicitly checking irq_bypass_vcpu
instead of irq_entry.type in kvm_arch_irq_bypass_del_producer(), and arm64
could be modified to utilize irq_bypass_vcpu in a similar manner. But (a)
that wouldn't fix the routing updates bug, and (b) fixing core code doesn't
preclude x86 (or arm64) from adding such code as a sanity check (spoiler
alert).
Fixes: f70c20aaf141 ("KVM: Add an arch specific hooks in 'struct kvm_kernel_irqfd'")
Fixes: cb210737675e ("KVM: Pass new routing entries and irqfd when updating IRTEs")
Fixes: a0d7e2fc61ab ("KVM: arm64: vgic-v4: Only attempt vLPI mapping for actual MSIs")
Cc: stable@vger.kernel.org
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oupton@kernel.org>
Link: https://patch.msgid.link/20260113174606.104978-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Zhiquan Li <zhiquan_li@163.com>
Date: Sat Feb 7 16:34:29 2026 -0500
KVM: selftests: Add -U_FORTIFY_SOURCE to avoid some unpredictable test failures
[ Upstream commit e396a74222654486d6ab45dca5d0c54c408b8b91 ]
Some distributions (such as Ubuntu) configure GCC so that
_FORTIFY_SOURCE is automatically enabled at -O1 or above. This results
in some fortified version of definitions of standard library functions
are included. While linker resolves the symbols, the fortified versions
might override the definitions in lib/string_override.c and reference to
those PLT entries in GLIBC. This is not a problem for the code in host,
but it is a disaster for the guest code. E.g., if build and run
x86/nested_emulation_test on Ubuntu 24.04 will encounter a L1 #PF due to
memset() reference to __memset_chk@plt.
The option -fno-builtin-memset is not helpful here, because those
fortified versions are not built-in but some definitions which are
included by header, they are for different intentions.
In order to eliminate the unpredictable behaviors may vary depending on
the linker and platform, add the "-U_FORTIFY_SOURCE" into CFLAGS to
prevent from introducing the fortified definitions.
Signed-off-by: Zhiquan Li <zhiquan_li@163.com>
Link: https://patch.msgid.link/20260122053551.548229-1-zhiquan_li@163.com
Fixes: 6b6f71484bf4 ("KVM: selftests: Implement memcmp(), memcpy(), and memset() for guest use")
Cc: stable@vger.kernel.org
[sean: tag for stable]
Signed-off-by: Sean Christopherson <seanjc@google.com>
[ Makefile.kvm -> Makefile ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Date: Wed Feb 11 13:37:27 2026 +0100
Linux 6.1.163
Link: https://lore.kernel.org/r/20260209142301.913348974@linuxfoundation.org
Tested-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Tested-by: Brett A C Sheffield <bacs@librecast.net>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Hardik Garg <hargar@linux.microsoft.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Peter Schneider <pschneider1968@googlemail.com>
Tested-by: Mark Brown <broonie@kernel.org>
Tested-by: Jeffrin Jose T <jeffrin@rajagiritech.edu.in>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Chenghao Duan <duanchenghao@kylinos.cn>
Date: Wed Dec 31 15:19:20 2025 +0800
LoongArch: Enable exception fixup for specific ADE subcode
[ Upstream commit 9bdc1ab5e4ce6f066119018d8f69631a46f9c5a0 ]
This patch allows the LoongArch BPF JIT to handle recoverable memory
access errors generated by BPF_PROBE_MEM* instructions.
When a BPF program performs memory access operations, the instructions
it executes may trigger ADEM exceptions. The kernel’s built-in BPF
exception table mechanism (EX_TYPE_BPF) will generate corresponding
exception fixup entries in the JIT compilation phase; however, the
architecture-specific trap handling function needs to proactively call
the common fixup routine to achieve exception recovery.
do_ade(): fix EX_TYPE_BPF memory access exceptions for BPF programs,
ensure safe execution.
Relevant test cases: illegal address access tests in module_attach and
subprogs_extable of selftests/bpf.
Signed-off-by: Chenghao Duan <duanchenghao@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Huacai Chen <chenhuacai@kernel.org>
Date: Wed Dec 31 15:19:10 2025 +0800
LoongArch: Set correct protection_map[] for VM_NONE/VM_SHARED
[ Upstream commit d5be446948b379f1d1a8e7bc6656d13f44c5c7b1 ]
For 32BIT platform _PAGE_PROTNONE is 0, so set a VMA to be VM_NONE or
VM_SHARED will make pages non-present, then cause Oops with kernel page
fault.
Fix it by set correct protection_map[] for VM_NONE/VM_SHARED, replacing
_PAGE_PROTNONE with _PAGE_PRESENT.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Eric Dumazet <edumazet@google.com>
Date: Thu Jan 29 20:43:59 2026 +0000
macvlan: fix error recovery in macvlan_common_newlink()
[ Upstream commit f8db6475a83649689c087a8f52486fcc53e627e9 ]
valis provided a nice repro to crash the kernel:
ip link add p1 type veth peer p2
ip link set address 00:00:00:00:00:20 dev p1
ip link set up dev p1
ip link set up dev p2
ip link add mv0 link p2 type macvlan mode source
ip link add invalid% link p2 type macvlan mode source macaddr add 00:00:00:00:00:20
ping -c1 -I p1 1.2.3.4
He also gave a very detailed analysis:
<quote valis>
The issue is triggered when a new macvlan link is created with
MACVLAN_MODE_SOURCE mode and MACVLAN_MACADDR_ADD (or
MACVLAN_MACADDR_SET) parameter, lower device already has a macvlan
port and register_netdevice() called from macvlan_common_newlink()
fails (e.g. because of the invalid link name).
In this case macvlan_hash_add_source is called from
macvlan_change_sources() / macvlan_common_newlink():
This adds a reference to vlan to the port's vlan_source_hash using
macvlan_source_entry.
vlan is a pointer to the priv data of the link that is being created.
When register_netdevice() fails, the error is returned from
macvlan_newlink() to rtnl_newlink_create():
if (ops->newlink)
err = ops->newlink(dev, ¶ms, extack);
else
err = register_netdevice(dev);
if (err < 0) {
free_netdev(dev);
goto out;
}
and free_netdev() is called, causing a kvfree() on the struct
net_device that is still referenced in the source entry attached to
the lower device's macvlan port.
Now all packets sent on the macvlan port with a matching source mac
address will trigger a use-after-free in macvlan_forward_source().
</quote valis>
With all that, my fix is to make sure we call macvlan_flush_sources()
regardless of @create value whenever "goto destroy_macvlan_port;"
path is taken.
Many thanks to valis for following up on this issue.
Fixes: aa5fd0fb7748 ("driver: macvlan: Destroy new macvlan port if macvlan_common_newlink failed.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: valis <sec@valis.email>
Reported-by: syzbot+7182fbe91e58602ec1fe@syzkaller.appspotmail.com
Closes: https: //lore.kernel.org/netdev/695fb1e8.050a0220.1c677c.039f.GAE@google.com/T/#u
Cc: Boudewijn van der Heide <boudewijn@delta-utec.com>
Link: https://patch.msgid.link/20260129204359.632556-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jakub Kicinski <kuba@kernel.org>
Date: Thu Jan 29 19:38:27 2026 -0800
net: don't touch dev->stats in BPF redirect paths
[ Upstream commit fdf3f6800be36377e045e2448087f12132b88d2f ]
Gal reports that BPF redirect increments dev->stats.tx_errors
on failure. This is not correct, most modern drivers completely
ignore dev->stats so these drops will be invisible to the user.
Core code should use the dedicated core stats which are folded
into device stats in dev_get_stats().
Note that we're switching from tx_errors to tx_dropped.
Core only has tx_dropped, hence presumably users already expect
that counter to increment for "stack" Tx issues.
Reported-by: Gal Pressman <gal@nvidia.com>
Link: https://lore.kernel.org/c5df3b60-246a-4030-9c9a-0a35cd1ca924@nvidia.com
Fixes: b4ab31414970 ("bpf: Add redirect_neigh helper as redirect drop-in")
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260130033827.698841-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Zilin Guan <zilin@seu.edu.cn>
Date: Wed Jan 28 15:44:39 2026 +0000
net: liquidio: Fix off-by-one error in PF setup_nic_devices() cleanup
[ Upstream commit 8558aef4e8a1a83049ab906d21d391093cfa7e7f ]
In setup_nic_devices(), the initialization loop jumps to the label
setup_nic_dev_free on failure. The current cleanup loop while(i--)
skip the failing index i, causing a memory leak.
Fix this by changing the loop to iterate from the current index i
down to 0.
Also, decrement i in the devlink_alloc failure path to point to the
last successfully allocated index.
Compile tested only. Issue found using code review.
Fixes: f21fb3ed364b ("Add support of Cavium Liquidio ethernet adapters")
Suggested-by: Simon Horman <horms@kernel.org>
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20260128154440.278369-3-zilin@seu.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Zilin Guan <zilin@seu.edu.cn>
Date: Wed Jan 28 15:44:40 2026 +0000
net: liquidio: Fix off-by-one error in VF setup_nic_devices() cleanup
[ Upstream commit 6cbba46934aefdfb5d171e0a95aec06c24f7ca30 ]
In setup_nic_devices(), the initialization loop jumps to the label
setup_nic_dev_free on failure. The current cleanup loop while(i--)
skip the failing index i, causing a memory leak.
Fix this by changing the loop to iterate from the current index i
down to 0.
Compile tested only. Issue found using code review.
Fixes: 846b46873eeb ("liquidio CN23XX: VF offload features")
Suggested-by: Simon Horman <horms@kernel.org>
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20260128154440.278369-4-zilin@seu.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Zilin Guan <zilin@seu.edu.cn>
Date: Wed Jan 28 15:44:38 2026 +0000
net: liquidio: Initialize netdev pointer before queue setup
[ Upstream commit 926ede0c85e1e57c97d64d9612455267d597bb2c ]
In setup_nic_devices(), the netdev is allocated using alloc_etherdev_mq().
However, the pointer to this structure is stored in oct->props[i].netdev
only after the calls to netif_set_real_num_rx_queues() and
netif_set_real_num_tx_queues().
If either of these functions fails, setup_nic_devices() returns an error
without freeing the allocated netdev. Since oct->props[i].netdev is still
NULL at this point, the cleanup function liquidio_destroy_nic_device()
will fail to find and free the netdev, resulting in a memory leak.
Fix this by initializing oct->props[i].netdev before calling the queue
setup functions. This ensures that the netdev is properly accessible for
cleanup in case of errors.
Compile tested only. Issue found using a prototype static analysis tool
and code review.
Fixes: c33c997346c3 ("liquidio: enhanced ethtool --set-channels feature")
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20260128154440.278369-2-zilin@seu.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Date: Wed Dec 10 22:24:51 2025 -0800
net: usb: sr9700: support devices with virtual driver CD
[ Upstream commit bf4172bd870c3a34d3065cbb39192c22cbd7b18d ]
Some SR9700 devices have an SPI flash chip containing a virtual driver
CD, in which case they appear as a device with two interfaces and
product ID 0x9702. Interface 0 is the driver CD and interface 1 is the
Ethernet device.
Link: https://github.com/name-kurniawan/usb-lan
Link: https://www.draisberghof.de/usb_modeswitch/bb/viewtopic.php?t=2185
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Link: https://patch.msgid.link/20251211062451.139036-1-enelsonmoore@gmail.com
[pabeni@redhat.com: fixes link tags]
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Andrew Fasano <andrew.fasano@nist.gov>
Date: Wed Feb 4 17:46:58 2026 +0100
netfilter: nf_tables: fix inverted genmask check in nft_map_catchall_activate()
[ Upstream commit f41c5d151078c5348271ffaf8e7410d96f2d82f8 ]
nft_map_catchall_activate() has an inverted element activity check
compared to its non-catchall counterpart nft_mapelem_activate() and
compared to what is logically required.
nft_map_catchall_activate() is called from the abort path to re-activate
catchall map elements that were deactivated during a failed transaction.
It should skip elements that are already active (they don't need
re-activation) and process elements that are inactive (they need to be
restored). Instead, the current code does the opposite: it skips inactive
elements and processes active ones.
Compare the non-catchall activate callback, which is correct:
nft_mapelem_activate():
if (nft_set_elem_active(ext, iter->genmask))
return 0; /* skip active, process inactive */
With the buggy catchall version:
nft_map_catchall_activate():
if (!nft_set_elem_active(ext, genmask))
continue; /* skip inactive, process active */
The consequence is that when a DELSET operation is aborted,
nft_setelem_data_activate() is never called for the catchall element.
For NFT_GOTO verdict elements, this means nft_data_hold() is never
called to restore the chain->use reference count. Each abort cycle
permanently decrements chain->use. Once chain->use reaches zero,
DELCHAIN succeeds and frees the chain while catchall verdict elements
still reference it, resulting in a use-after-free.
This is exploitable for local privilege escalation from an unprivileged
user via user namespaces + nftables on distributions that enable
CONFIG_USER_NS and CONFIG_NF_TABLES.
Fix by removing the negation so the check matches nft_mapelem_activate():
skip active elements, process inactive ones.
Fixes: 628bd3e49cba ("netfilter: nf_tables: drop map element references from preparation phase")
Signed-off-by: Andrew Fasano <andrew.fasano@nist.gov>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Pablo Neira Ayuso <pablo@netfilter.org>
Date: Tue Apr 22 21:52:44 2025 +0200
netfilter: nft_set_pipapo: clamp maximum map bucket size to INT_MAX
commit b85e3367a5716ed3662a4fe266525190d2af76df upstream.
Otherwise, it is possible to hit WARN_ON_ONCE in __kvmalloc_node_noprof()
when resizing hashtable because __GFP_NOWARN is unset.
Similar to:
b541ba7d1f5a ("netfilter: conntrack: clamp maximum hashtable size to INT_MAX")
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
[ Keerthana: Handle freeing new_lt ]
Signed-off-by: Keerthana K <keerthana.kalyanasundaram@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Daniel Gomez <da.gomez@samsung.com>
Date: Fri Dec 19 06:13:20 2025 +0100
netfilter: replace -EEXIST with -EBUSY
[ Upstream commit 2bafeb8d2f380c3a81d98bd7b78b854b564f9cd4 ]
The -EEXIST error code is reserved by the module loading infrastructure
to indicate that a module is already loaded. When a module's init
function returns -EEXIST, userspace tools like kmod interpret this as
"module already loaded" and treat the operation as successful, returning
0 to the user even though the module initialization actually failed.
Replace -EEXIST with -EBUSY to ensure correct error reporting in the module
initialization path.
Affected modules:
* ebtable_broute ebtable_filter ebtable_nat arptable_filter
* ip6table_filter ip6table_mangle ip6table_nat ip6table_raw
* ip6table_security iptable_filter iptable_mangle iptable_nat
* iptable_raw iptable_security
Signed-off-by: Daniel Gomez <da.gomez@samsung.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Chaitanya Kulkarni <ckulkarnilinux@gmail.com>
Date: Fri Dec 19 16:18:42 2025 -0800
nvme-fc: release admin tagset if init fails
[ Upstream commit d1877cc7270302081a315a81a0ee8331f19f95c8 ]
nvme_fabrics creates an NVMe/FC controller in following path:
nvmf_dev_write()
-> nvmf_create_ctrl()
-> nvme_fc_create_ctrl()
-> nvme_fc_init_ctrl()
nvme_fc_init_ctrl() allocates the admin blk-mq resources right after
nvme_add_ctrl() succeeds. If any of the subsequent steps fail (changing
the controller state, scheduling connect work, etc.), we jump to the
fail_ctrl path, which tears down the controller references but never
frees the admin queue/tag set. The leaked blk-mq allocations match the
kmemleak report seen during blktests nvme/fc.
Check ctrl->ctrl.admin_tagset in the fail_ctrl path and call
nvme_remove_admin_tag_set() when it is set so that all admin queue
allocations are reclaimed whenever controller setup aborts.
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Reviewed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Chaitanya Kulkarni <ckulkarnilinux@gmail.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: YunJe Shin <yjshin0438@gmail.com>
Date: Wed Jan 28 09:41:07 2026 +0900
nvmet-tcp: add bounds checks in nvmet_tcp_build_pdu_iovec
commit 52a0a98549344ca20ad81a4176d68d28e3c05a5c upstream.
nvmet_tcp_build_pdu_iovec() could walk past cmd->req.sg when a PDU
length or offset exceeds sg_cnt and then use bogus sg->length/offset
values, leading to _copy_to_iter() GPF/KASAN. Guard sg_idx, remaining
entries, and sg->length/offset before building the bvec.
Fixes: 872d26a391da ("nvmet-tcp: add NVMe over TCP target driver")
Signed-off-by: YunJe Shin <ioerts@kookmin.ac.kr>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Joonkyo Jung <joonkyoj@yonsei.ac.kr>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Kaushlendra Kumar <kaushlendra.kumar@intel.com>
Date: Wed Dec 24 11:41:44 2025 +0530
platform/x86: intel_telemetry: Fix PSS event register mask
[ Upstream commit 39e9c376ac42705af4ed4ae39eec028e8bced9b4 ]
The PSS telemetry info parsing incorrectly applies
TELEM_INFO_SRAMEVTS_MASK when extracting event register
count from firmware response. This reads bits 15-8 instead
of the correct bits 7-0, causing misdetection of hardware
capabilities.
The IOSS path correctly uses TELEM_INFO_NENABLES_MASK for
register count. Apply the same mask to PSS parsing for
consistency.
Fixes: 9d16b482b059 ("platform:x86: Add Intel telemetry platform driver")
Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com>
Link: https://patch.msgid.link/20251224061144.3925519-1-kaushlendra.kumar@intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Kaushlendra Kumar <kaushlendra.kumar@intel.com>
Date: Wed Dec 24 08:50:53 2025 +0530
platform/x86: intel_telemetry: Fix swapped arrays in PSS output
commit 25e9e322d2ab5c03602eff4fbf4f7c40019d8de2 upstream.
The LTR blocking statistics and wakeup event counters are incorrectly
cross-referenced during debugfs output rendering. The code populates
pss_ltr_blkd[] with LTR blocking data and pss_s0ix_wakeup[] with wakeup
data, but the display loops reference the wrong arrays.
This causes the "LTR Blocking Status" section to print wakeup events
and the "Wakes Status" section to print LTR blockers, misleading power
management analysis and S0ix residency debugging.
Fix by aligning array usage with the intended output section labels.
Fixes: 87bee290998d ("platform:x86: Add Intel Telemetry Debugfs interfaces")
Cc: stable@vger.kernel.org
Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com>
Link: https://patch.msgid.link/20251224032053.3915900-1-kaushlendra.kumar@intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Date: Mon Jan 26 16:38:45 2026 +0200
platform/x86: toshiba_haps: Fix memory leaks in add/remove routines
[ Upstream commit 128497456756e1b952bd5a912cd073836465109d ]
toshiba_haps_add() leaks the haps object allocated by it if it returns
an error after allocating that object successfully.
toshiba_haps_remove() does not free the object pointed to by
toshiba_haps before clearing that pointer, so it becomes unreachable
allocated memory.
Address these memory leaks by using devm_kzalloc() for allocating
the memory in question.
Fixes: 23d0ba0c908a ("platform/x86: Toshiba HDD Active Protection Sensor")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Xu Yang <xu.yang_2@nxp.com>
Date: Sat Feb 7 10:23:59 2026 -0500
pmdomain: imx8m-blk-ctrl: fix out-of-range access of bc->domains
[ Upstream commit 6bd8b4a92a901fae1a422e6f914801063c345e8d ]
Fix out-of-range access of bc->domains in imx8m_blk_ctrl_remove().
Fixes: 2684ac05a8c4 ("soc: imx: add i.MX8M blk-ctrl driver")
Cc: stable@kernel.org
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Xu Yang <xu.yang_2@nxp.com>
Date: Sat Feb 7 10:11:16 2026 -0500
pmdomain: imx8mp-blk-ctrl: Keep gpc power domain on for system wakeup
[ Upstream commit e9ab2b83893dd03cf04d98faded81190e635233f ]
Current design will power off all dependent GPC power domains in
imx8mp_blk_ctrl_suspend(), even though the user device has enabled
wakeup capability. The result is that wakeup function never works
for such device.
An example will be USB wakeup on i.MX8MP. PHY device '382f0040.usb-phy'
is attached to power domain 'hsioblk-usb-phy2' which is spawned by hsio
block control. A virtual power domain device 'genpd:3:32f10000.blk-ctrl'
is created to build connection with 'hsioblk-usb-phy2' and it depends on
GPC power domain 'usb-otg2'. If device '382f0040.usb-phy' enable wakeup,
only power domain 'hsioblk-usb-phy2' keeps on during system suspend,
power domain 'usb-otg2' is off all the time. So the wakeup event can't
happen.
In order to further establish a connection between the power domains
related to GPC and block control during system suspend, register a genpd
power on/off notifier for the power_dev. This allows us to prevent the GPC
power domain from being powered off, in case the block control power
domain is kept on to serve system wakeup.
Suggested-by: Ulf Hansson <ulf.hansson@linaro.org>
Fixes: 556f5cf9568a ("soc: imx: add i.MX8MP HSIO blk-ctrl")
Cc: stable@vger.kernel.org
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Xu Yang <xu.yang_2@nxp.com>
Date: Sat Feb 7 10:19:11 2026 -0500
pmdomain: imx8mp-blk-ctrl: Keep usb phy power domain on for system wakeup
[ Upstream commit e2c4c5b2bbd4f688a0f9f6da26cdf6d723c53478 ]
USB system wakeup need its PHY on, so add the GENPD_FLAG_ACTIVE_WAKEUP
flags to USB PHY genpd configuration.
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Fixes: 556f5cf9568a ("soc: imx: add i.MX8MP HSIO blk-ctrl")
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Ilya Dryomov <idryomov@gmail.com>
Date: Wed Jan 7 22:37:55 2026 +0100
rbd: check for EOD after exclusive lock is ensured to be held
commit bd3884a204c3b507e6baa9a4091aa927f9af5404 upstream.
Similar to commit 870611e4877e ("rbd: get snapshot context after
exclusive lock is ensured to be held"), move the "beyond EOD" check
into the image request state machine so that it's performed after
exclusive lock is ensured to be held. This avoids various race
conditions which can arise when the image is shrunk under I/O (in
practice, mostly readahead). In one such scenario
rbd_assert(objno < rbd_dev->object_map_size);
can be triggered if a close-to-EOD read gets queued right before the
shrink is initiated and the EOD check is performed against an outdated
mapping_size. After the resize is done on the server side and exclusive
lock is (re)acquired bringing along the new (now shrunk) object map, the
read starts going through the state machine and rbd_obj_may_exist() gets
invoked on an object that is out of bounds of rbd_dev->object_map array.
Cc: stable@vger.kernel.org
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@linux.dev>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Bert Karwatzki <spasswolf@web.de>
Date: Sun Feb 1 01:24:45 2026 +0100
Revert "drm/amd: Check if ASPM is enabled from PCIe subsystem"
commit 243b467dea1735fed904c2e54d248a46fa417a2d upstream.
This reverts commit 7294863a6f01248d72b61d38478978d638641bee.
This commit was erroneously applied again after commit 0ab5d711ec74
("drm/amd: Refactor `amdgpu_aspm` to be evaluated per device")
removed it, leading to very hard to debug crashes, when used with a system with two
AMD GPUs of which only one supports ASPM.
Link: https://lore.kernel.org/linux-acpi/20251006120944.7880-1-spasswolf@web.de/
Link: https://github.com/acpica/acpica/issues/1060
Fixes: 0ab5d711ec74 ("drm/amd: Refactor `amdgpu_aspm` to be evaluated per device")
Signed-off-by: Bert Karwatzki <spasswolf@web.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 97a9689300eb2b393ba5efc17c8e5db835917080)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Wupeng Ma <mawupeng1@huawei.com>
Date: Sun Dec 28 14:50:07 2025 +0800
ring-buffer: Avoid softlockup in ring_buffer_resize() during memory free
[ Upstream commit 6435ffd6c7fcba330dfa91c58dc30aed2df3d0bf ]
When user resize all trace ring buffer through file 'buffer_size_kb',
then in ring_buffer_resize(), kernel allocates buffer pages for each
cpu in a loop.
If the kernel preemption model is PREEMPT_NONE and there are many cpus
and there are many buffer pages to be freed, it may not give up cpu
for a long time and finally cause a softlockup.
To avoid it, call cond_resched() after each cpu buffer free as Commit
f6bd2c92488c ("ring-buffer: Avoid softlockup in ring_buffer_resize()")
does.
Detailed call trace as follow:
rcu: INFO: rcu_sched self-detected stall on CPU
rcu: 24-....: (14837 ticks this GP) idle=521c/1/0x4000000000000000 softirq=230597/230597 fqs=5329
rcu: (t=15004 jiffies g=26003221 q=211022 ncpus=96)
CPU: 24 UID: 0 PID: 11253 Comm: bash Kdump: loaded Tainted: G EL 6.18.2+ #278 NONE
pc : arch_local_irq_restore+0x8/0x20
arch_local_irq_restore+0x8/0x20 (P)
free_frozen_page_commit+0x28c/0x3b0
__free_frozen_pages+0x1c0/0x678
___free_pages+0xc0/0xe0
free_pages+0x3c/0x50
ring_buffer_resize.part.0+0x6a8/0x880
ring_buffer_resize+0x3c/0x58
__tracing_resize_ring_buffer.part.0+0x34/0xd8
tracing_resize_ring_buffer+0x8c/0xd0
tracing_entries_write+0x74/0xd8
vfs_write+0xcc/0x288
ksys_write+0x74/0x118
__arm64_sys_write+0x24/0x38
Cc: <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20251228065008.2396573-1-mawupeng1@huawei.com
Signed-off-by: Wupeng Ma <mawupeng1@huawei.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Björn Töpel <bjorn@rivosinc.com>
Date: Sat Apr 19 13:13:59 2025 +0200
riscv: Replace function-like macro by static inline function
commit 121f34341d396b666d8a90b24768b40e08ca0d61 upstream.
The flush_icache_range() function is implemented as a "function-like
macro with unused parameters", which can result in "unused variables"
warnings.
Replace the macro with a static inline function, as advised by
Documentation/process/coding-style.rst.
Fixes: 08f051eda33b ("RISC-V: Flush I$ when making a dirty page executable")
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20250419111402.1660267-1-bjorn@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Ron Economos <re@w6rz.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Björn Töpel <bjorn@rivosinc.com>
Date: Sat Apr 19 13:14:00 2025 +0200
riscv: uprobes: Add missing fence.i after building the XOL buffer
commit 7d1d19a11cfbfd8bae1d89cc010b2cc397cd0c48 upstream.
The XOL (execute out-of-line) buffer is used to single-step the
replaced instruction(s) for uprobes. The RISC-V port was missing a
proper fence.i (i$ flushing) after constructing the XOL buffer, which
can result in incorrect execution of stale/broken instructions.
This was found running the BPF selftests "test_progs:
uprobe_autoattach, attach_probe" on the Spacemit K1/X60, where the
uprobes tests randomly blew up.
Reviewed-by: Guo Ren <guoren@kernel.org>
Fixes: 74784081aac8 ("riscv: Add uprobes supported")
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20250419111402.1660267-2-bjorn@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Rahul Sharma <black.hawk@163.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Maurizio Lombardi <mlombard@redhat.com>
Date: Mon Jan 12 17:53:51 2026 +0100
scsi: target: iscsi: Fix use-after-free in iscsit_dec_conn_usage_count()
[ Upstream commit 9411a89e9e7135cc459178fa77a3f1d6191ae903 ]
In iscsit_dec_conn_usage_count(), the function calls complete() while
holding the conn->conn_usage_lock. As soon as complete() is invoked, the
waiter (such as iscsit_close_connection()) may wake up and proceed to free
the iscsit_conn structure.
If the waiter frees the memory before the current thread reaches
spin_unlock_bh(), it results in a KASAN slab-use-after-free as the function
attempts to release a lock within the already-freed connection structure.
Fix this by releasing the spinlock before calling complete().
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reported-by: Zhaojuan Guo <zguo@redhat.com>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Link: https://patch.msgid.link/20260112165352.138606-2-mlombard@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Maurizio Lombardi <mlombard@redhat.com>
Date: Mon Jan 12 17:53:52 2026 +0100
scsi: target: iscsi: Fix use-after-free in iscsit_dec_session_usage_count()
[ Upstream commit 84dc6037390b8607c5551047d3970336cb51ba9a ]
In iscsit_dec_session_usage_count(), the function calls complete() while
holding the sess->session_usage_lock. Similar to the connection usage count
logic, the waiter signaled by complete() (e.g., in the session release
path) may wake up and free the iscsit_session structure immediately.
This creates a race condition where the current thread may attempt to
execute spin_unlock_bh() on a session structure that has already been
deallocated, resulting in a KASAN slab-use-after-free.
To resolve this, release the session_usage_lock before calling complete()
to ensure all dereferences of the sess pointer are finished before the
waiter is allowed to proceed with deallocation.
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reported-by: Zhaojuan Guo <zguo@redhat.com>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Link: https://patch.msgid.link/20260112165352.138606-3-mlombard@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: ChenXiaoSong <chenxiaosong@kylinos.cn>
Date: Mon Feb 2 08:24:07 2026 +0000
smb/client: fix memory leak in smb2_open_file()
[ Upstream commit e3a43633023e3cacaca60d4b8972d084a2b06236 ]
Reproducer:
1. server: directories are exported read-only
2. client: mount -t cifs //${server_ip}/export /mnt
3. client: dd if=/dev/zero of=/mnt/file bs=512 count=1000 oflag=direct
4. client: umount /mnt
5. client: sleep 1
6. client: modprobe -r cifs
The error message is as follows:
=============================================================================
BUG cifs_small_rq (Not tainted): Objects remaining on __kmem_cache_shutdown()
-----------------------------------------------------------------------------
Object 0x00000000d47521be @offset=14336
...
WARNING: mm/slub.c:1251 at __kmem_cache_shutdown+0x34e/0x440, CPU#0: modprobe/1577
...
Call Trace:
<TASK>
kmem_cache_destroy+0x94/0x190
cifs_destroy_request_bufs+0x3e/0x50 [cifs]
cleanup_module+0x4e/0x540 [cifs]
__se_sys_delete_module+0x278/0x400
__x64_sys_delete_module+0x5f/0x70
x64_sys_call+0x2299/0x2ff0
do_syscall_64+0x89/0x350
entry_SYSCALL_64_after_hwframe+0x76/0x7e
...
kmem_cache_destroy cifs_small_rq: Slab cache still has objects when called from cifs_destroy_request_bufs+0x3e/0x50 [cifs]
WARNING: mm/slab_common.c:532 at kmem_cache_destroy+0x16b/0x190, CPU#0: modprobe/1577
Link: https://lore.kernel.org/linux-cifs/9751f02d-d1df-4265-a7d6-b19761b21834@linux.dev/T/#mf14808c144448b715f711ce5f0477a071f08eaf6
Fixes: e255612b5ed9 ("cifs: Add fallback for SMB2 CREATE without FILE_READ_ATTRIBUTES")
Reported-by: Paulo Alcantara <pc@manguebit.org>
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Reviewed-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: ZhangGuoDong <zhangguodong@kylinos.cn>
Date: Sun Dec 28 22:51:01 2025 +0800
smb/server: call ksmbd_session_rpc_close() on error path in create_smb2_pipe()
[ Upstream commit 7c28f8eef5ac5312794d8a52918076dcd787e53b ]
When ksmbd_iov_pin_rsp() fails, we should call ksmbd_session_rpc_close().
Signed-off-by: ZhangGuoDong <zhangguodong@kylinos.cn>
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Breno Leitao <leitao@debian.org>
Date: Mon Jan 26 09:50:27 2026 -0800
spi: tegra210-quad: Move curr_xfer read inside spinlock
[ Upstream commit ef13ba357656451d6371940d8414e3e271df97e3 ]
Move the assignment of the transfer pointer from curr_xfer inside the
spinlock critical section in both handle_cpu_based_xfer() and
handle_dma_based_xfer().
Previously, curr_xfer was read before acquiring the lock, creating a
window where the timeout path could clear curr_xfer between reading it
and using it. By moving the read inside the lock, the handlers are
guaranteed to see a consistent value that cannot be modified by the
timeout path.
Fixes: 921fc1838fb0 ("spi: tegra210-quad: Add support for Tegra210 QSPI controller")
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20260126-tegra_xfer-v2-2-6d2115e4f387@debian.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Breno Leitao <leitao@debian.org>
Date: Mon Jan 26 09:50:28 2026 -0800
spi: tegra210-quad: Protect curr_xfer assignment in tegra_qspi_setup_transfer_one
[ Upstream commit f5a4d7f5e32ba163cff893493ec1cbb0fd2fb0d5 ]
When the timeout handler processes a completed transfer and signals
completion, the transfer thread can immediately set up the next transfer
and assign curr_xfer to point to it.
If a delayed ISR from the previous transfer then runs, it checks if
(!tqspi->curr_xfer) (currently without the lock also -- to be fixed
soon) to detect stale interrupts, but this check passes because
curr_xfer now points to the new transfer. The ISR then incorrectly
processes the new transfer's context.
Protect the curr_xfer assignment with the spinlock to ensure the ISR
either sees NULL (and bails out) or sees the new value only after the
assignment is complete.
Fixes: 921fc1838fb0 ("spi: tegra210-quad: Add support for Tegra210 QSPI controller")
Signed-off-by: Breno Leitao <leitao@debian.org>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260126-tegra_xfer-v2-3-6d2115e4f387@debian.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Breno Leitao <leitao@debian.org>
Date: Mon Jan 26 09:50:30 2026 -0800
spi: tegra210-quad: Protect curr_xfer clearing in tegra_qspi_non_combined_seq_xfer
[ Upstream commit 6d7723e8161f3c3f14125557e19dd080e9d882be ]
Protect the curr_xfer clearing in tegra_qspi_non_combined_seq_xfer()
with the spinlock to prevent a race with the interrupt handler that
reads this field to check if a transfer is in progress.
Fixes: b4e002d8a7ce ("spi: tegra210-quad: Fix timeout handling")
Signed-off-by: Breno Leitao <leitao@debian.org>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260126-tegra_xfer-v2-5-6d2115e4f387@debian.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Breno Leitao <leitao@debian.org>
Date: Mon Jan 26 09:50:29 2026 -0800
spi: tegra210-quad: Protect curr_xfer in tegra_qspi_combined_seq_xfer
[ Upstream commit bf4528ab28e2bf112c3a2cdef44fd13f007781cd ]
The curr_xfer field is read by the IRQ handler without holding the lock
to check if a transfer is in progress. When clearing curr_xfer in the
combined sequence transfer loop, protect it with the spinlock to prevent
a race with the interrupt handler.
Protect the curr_xfer clearing at the exit path of
tegra_qspi_combined_seq_xfer() with the spinlock to prevent a race
with the interrupt handler that reads this field.
Without this protection, the IRQ handler could read a partially updated
curr_xfer value, leading to NULL pointer dereference or use-after-free.
Fixes: b4e002d8a7ce ("spi: tegra210-quad: Fix timeout handling")
Signed-off-by: Breno Leitao <leitao@debian.org>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260126-tegra_xfer-v2-4-6d2115e4f387@debian.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Breno Leitao <leitao@debian.org>
Date: Mon Jan 26 09:50:26 2026 -0800
spi: tegra210-quad: Return IRQ_HANDLED when timeout already processed transfer
[ Upstream commit aabd8ea0aa253d40cf5f20a609fc3d6f61e38299 ]
When the ISR thread wakes up late and finds that the timeout handler
has already processed the transfer (curr_xfer is NULL), return
IRQ_HANDLED instead of IRQ_NONE.
Use a similar approach to tegra_qspi_handle_timeout() by reading
QSPI_TRANS_STATUS and checking the QSPI_RDY bit to determine if the
hardware actually completed the transfer. If QSPI_RDY is set, the
interrupt was legitimate and triggered by real hardware activity.
The fact that the timeout path handled it first doesn't make it
spurious. Returning IRQ_NONE incorrectly suggests the interrupt
wasn't for this device, which can cause issues with shared interrupt
lines and interrupt accounting.
Fixes: b4e002d8a7ce ("spi: tegra210-quad: Fix timeout handling")
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Usama Arif <usamaarif642@gmail.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260126-tegra_xfer-v2-1-6d2115e4f387@debian.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Felix Gu <ustc.gu@gmail.com>
Date: Mon Feb 2 23:15:09 2026 +0800
spi: tegra: Fix a memory leak in tegra_slink_probe()
[ Upstream commit 41d9a6795b95d6ea28439ac1e9ce8c95bbca20fc ]
In tegra_slink_probe(), when platform_get_irq() fails, it directly
returns from the function with an error code, which causes a memory leak.
Replace it with a goto label to ensure proper cleanup.
Fixes: eb9913b511f1 ("spi: tegra: Fix missing IRQ check in tegra_slink_probe()")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20260202-slink-v1-1-eac50433a6f9@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Daniel Hodges <hodgesd@meta.com>
Date: Sat Jan 31 10:01:14 2026 -0800
tipc: use kfree_sensitive() for session key material
[ Upstream commit 74d9391e8849e70ded5309222d09b0ed0edbd039 ]
The rx->skey field contains a struct tipc_aead_key with GCM-AES
encryption keys used for TIPC cluster communication. Using plain
kfree() leaves this sensitive key material in freed memory pages
where it could potentially be recovered.
Switch to kfree_sensitive() to ensure the key material is zeroed
before the memory is freed.
Fixes: 1ef6f7c9390f ("tipc: add automatic session key exchange")
Signed-off-by: Daniel Hodges <hodgesd@meta.com>
Link: https://patch.msgid.link/20260131180114.2121438-1-hodgesd@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Steven Rostedt <rostedt@goodmis.org>
Date: Sat Feb 7 12:44:03 2026 -0500
tracing: Fix ftrace event field alignments
[ Upstream commit 033c55fe2e326bea022c3cc5178ecf3e0e459b82 ]
The fields of ftrace specific events (events used to save ftrace internal
events like function traces and trace_printk) are generated similarly to
how normal trace event fields are generated. That is, the fields are added
to a trace_events_fields array that saves the name, offset, size,
alignment and signness of the field. It is used to produce the output in
the format file in tracefs so that tooling knows how to parse the binary
data of the trace events.
The issue is that some of the ftrace event structures are packed. The
function graph exit event structures are one of them. The 64 bit calltime
and rettime fields end up 4 byte aligned, but the algorithm to show to
userspace shows them as 8 byte aligned.
The macros that create the ftrace events has one for embedded structure
fields. There's two macros for theses fields:
__field_desc() and __field_packed()
The difference of the latter macro is that it treats the field as packed.
Rename that field to __field_desc_packed() and create replace the
__field_packed() to be a normal field that is packed and have the calltime
and rettime use those.
This showed up on 32bit architectures for function graph time fields. It
had:
~# cat /sys/kernel/tracing/events/ftrace/funcgraph_exit/format
[..]
field:unsigned long func; offset:8; size:4; signed:0;
field:unsigned int depth; offset:12; size:4; signed:0;
field:unsigned int overrun; offset:16; size:4; signed:0;
field:unsigned long long calltime; offset:24; size:8; signed:0;
field:unsigned long long rettime; offset:32; size:8; signed:0;
Notice that overrun is at offset 16 with size 4, where in the structure
calltime is at offset 20 (16 + 4), but it shows the offset at 24. That's
because it used the alignment of unsigned long long when used as a
declaration and not as a member of a structure where it would be aligned
by word size (in this case 4).
By using the proper structure alignment, the format has it at the correct
offset:
~# cat /sys/kernel/tracing/events/ftrace/funcgraph_exit/format
[..]
field:unsigned long func; offset:8; size:4; signed:0;
field:unsigned int depth; offset:12; size:4; signed:0;
field:unsigned int overrun; offset:16; size:4; signed:0;
field:unsigned long long calltime; offset:20; size:8; signed:0;
field:unsigned long long rettime; offset:28; size:8; signed:0;
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reported-by: "jempty.liang" <imntjempty@163.com>
Link: https://patch.msgid.link/20260204113628.53faec78@gandalf.local.home
Fixes: 04ae87a52074e ("ftrace: Rework event_create_dir()")
Closes: https://lore.kernel.org/all/20260130015740.212343-1-imntjempty@163.com/
Closes: https://lore.kernel.org/all/20260202123342.2544795-1-imntjempty@163.com/
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
[ Context / renames ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Veerendranath Jakkam <veerendranath.jakkam@oss.qualcomm.com>
Date: Fri Jan 9 20:30:04 2026 +0530
wifi: cfg80211: Fix bitrate calculation overflow for HE rates
[ Upstream commit a3034bf0746d88a00cceda9541534a5721445a24 ]
An integer overflow occurs in cfg80211_calculate_bitrate_he() when
calculating bitrates for high throughput HE configurations.
For example, with 160 MHz bandwidth, HE-MCS 13, HE-NSS 4, and HE-GI 0,
the multiplication (result * rate->nss) overflows the 32-bit 'result'
variable before division by 8, leading to significantly underestimated
bitrate values.
The overflow occurs because the NSS multiplication operates on a 32-bit
integer that cannot accommodate intermediate values exceeding
4,294,967,295. When overflow happens, the value wraps around, producing
incorrect bitrates for high MCS and NSS combinations.
Fix this by utilizing the 64-bit 'tmp' variable for the NSS
multiplication and subsequent divisions via do_div(). This approach
preserves full precision throughout the entire calculation, with the
final value assigned to 'result' only after completing all operations.
Signed-off-by: Veerendranath Jakkam <veerendranath.jakkam@oss.qualcomm.com>
Link: https://patch.msgid.link/20260109-he_bitrate_overflow-v1-1-95575e466b6e@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Date: Mon Dec 22 10:29:07 2025 +0800
wifi: mac80211: collect station statistics earlier when disconnect
[ Upstream commit a203dbeeca15a9b924f0d51f510921f4bae96801 ]
In __sta_info_destroy_part2(), station statistics are requested after the
IEEE80211_STA_NONE -> IEEE80211_STA_NOTEXIST transition. This is
problematic because the driver may be unable to handle the request due to
the STA being in the NOTEXIST state (i.e. if the driver destroys the
underlying data when transitioning to NOTEXIST).
Move the statistics collection to before the state transition to avoid
this issue.
Signed-off-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20251222-mac80211-move-station-stats-collection-earlier-v1-1-12cd4e42c633@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Date: Sun Jan 18 09:28:29 2026 +0200
wifi: mac80211: don't increment crypto_tx_tailroom_needed_cnt twice
[ Upstream commit 3f3d8ff31496874a69b131866f62474eb24ed20a ]
In reconfig, in case the driver asks to disconnect during the reconfig,
all the keys of the interface are marked as tainted.
Then ieee80211_reenable_keys will loop over all the interface keys, and
for each one it will
a) increment crypto_tx_tailroom_needed_cnt
b) call ieee80211_key_enable_hw_accel, which in turn will detect that
this key is tainted, so it will mark it as "not in hardware", which is
paired with crypto_tx_tailroom_needed_cnt incrementation, so we get two
incrementations for each tainted key.
Then we get a warning in ieee80211_free_keys.
To fix it, don't increment the count in ieee80211_reenable_keys for
tainted keys
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260118092821.4ca111fddcda.Id6e554f4b1c83760aa02d5a9e4e3080edb197aa2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Moon Hee Lee <moonhee.lee.ca@gmail.com>
Date: Mon Dec 15 19:59:32 2025 -0800
wifi: mac80211: ocb: skip rx_no_sta when interface is not joined
[ Upstream commit ff4071c60018a668249dc6a2df7d16330543540e ]
ieee80211_ocb_rx_no_sta() assumes a valid channel context, which is only
present after JOIN_OCB.
RX may run before JOIN_OCB is executed, in which case the OCB interface
is not operational. Skip RX peer handling when the interface is not
joined to avoid warnings in the RX path.
Reported-by: syzbot+b364457b2d1d4e4a3054@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=b364457b2d1d4e4a3054
Tested-by: syzbot+b364457b2d1d4e4a3054@syzkaller.appspotmail.com
Signed-off-by: Moon Hee Lee <moonhee.lee.ca@gmail.com>
Link: https://patch.msgid.link/20251216035932.18332-1-moonhee.lee.ca@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Peter Åstrand <astrand@lysator.liu.se>
Date: Wed Dec 3 08:57:08 2025 +0100
wifi: wlcore: ensure skb headroom before skb_push
[ Upstream commit e75665dd096819b1184087ba5718bd93beafff51 ]
This avoids occasional skb_under_panic Oops from wl1271_tx_work. In this case, headroom is
less than needed (typically 110 - 94 = 16 bytes).
Signed-off-by: Peter Astrand <astrand@lysator.liu.se>
Link: https://patch.msgid.link/097bd417-e1d7-acd4-be05-47b199075013@lysator.liu.se
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Andrew Cooper <andrew.cooper3@citrix.com>
Date: Mon Jan 26 21:10:46 2026 +0000
x86/kfence: fix booting on 32bit non-PAE systems
commit 16459fe7e0ca6520a6e8f603de4ccd52b90fd765 upstream.
The original patch inverted the PTE unconditionally to avoid
L1TF-vulnerable PTEs, but Linux doesn't make this adjustment in 2-level
paging.
Adjust the logic to use the flip_protnone_guard() helper, which is a nop
on 2-level paging but inverts the address bits in all other paging modes.
This doesn't matter for the Xen aspect of the original change. Linux no
longer supports running 32bit PV under Xen, and Xen doesn't support
running any 32bit PV guests without using PAE paging.
Link: https://lkml.kernel.org/r/20260126211046.2096622-1-andrew.cooper3@citrix.com
Fixes: b505f1944535 ("x86/kfence: avoid writing L1TF-vulnerable PTEs")
Reported-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Closes: https://lore.kernel.org/lkml/CAKFNMokwjw68ubYQM9WkzOuH51wLznHpEOMSqtMoV1Rn9JV_gw@mail.gmail.com/
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Tested-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Alexander Potapenko <glider@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Jann Horn <jannh@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>