Author: Kailang Yang <kailang@realtek.com>
Date: Mon Mar 3 14:56:10 2025 +0800
ALSA: hda/realtek - add supported Mic Mute LED for Lenovo platform
commit f603b159231b0c58f0c27ab39348534063d38223 upstream.
Support Mic Mute LED for ThinkCentre M series.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/c211a2702f1f411e86bd7420d7eebc03@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Kailang Yang <kailang@realtek.com>
Date: Wed Mar 5 13:54:34 2025 +0800
ALSA: hda/realtek: update ALC222 depop optimize
commit ca0dedaff92307591f66c9206933fbdfe87add10 upstream.
Add ALC222 its own depop functions for alc_init and alc_shutup.
[note: this fixes pop noise issues on the models with two headphone
jacks -- tiwai ]
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Hoku Ishibe <me@hokuishi.be>
Date: Sun Feb 23 21:05:17 2025 -0500
ALSA: hda: intel: Add Dell ALC3271 to power_save denylist
commit 1ee5aa765c22a0577ec552d460bf2035300b4b51 upstream.
Dell XPS 13 7390 with the Realtek ALC3271 codec experiences
persistent humming noise when the power_save mode is enabled.
This issue occurs when the codec enters power saving mode,
leading to unwanted noise from the speakers.
This patch adds the affected model (PCI ID 0x1028:0x0962) to the
power_save denylist to ensure power_save is disabled by default,
preventing power-off related noise issues.
Steps to Reproduce
1. Boot the system with `snd_hda_intel` loaded.
2. Verify that `power_save` mode is enabled:
```sh
cat /sys/module/snd_hda_intel/parameters/power_save
````
output: 10 (default power save timeout)
3. Wait for the power save timeout
4. Observe a persistent humming noise from the speakers
5. Disable `power_save` manually:
```sh
echo 0 | sudo tee /sys/module/snd_hda_intel/parameters/power_save
````
6. Confirm that the noise disappears immediately.
This issue has been observed on my system, and this patch
successfully eliminates the unwanted noise. If other users
experience similar issues, additional reports would be helpful.
Signed-off-by: Hoku Ishibe <me@hokuishi.be>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250224020517.51035-1-me@hokuishi.be
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Arnd Bergmann <arnd@arndb.de>
Date: Tue Mar 4 15:25:55 2025 +0100
ALSA: hda: realtek: fix incorrect IS_REACHABLE() usage
commit d0bbe332669c5db32c8c92bc967f8e7f8d460ddf upstream.
The alternative path leads to a build error after a recent change:
sound/pci/hda/patch_realtek.c: In function 'alc233_fixup_lenovo_low_en_micmute_led':
include/linux/stddef.h:9:14: error: called object is not a function or function pointer
9 | #define NULL ((void *)0)
| ^
sound/pci/hda/patch_realtek.c:5041:49: note: in expansion of macro 'NULL'
5041 | #define alc233_fixup_lenovo_line2_mic_hotkey NULL
| ^~~~
sound/pci/hda/patch_realtek.c:5063:9: note: in expansion of macro 'alc233_fixup_lenovo_line2_mic_hotkey'
5063 | alc233_fixup_lenovo_line2_mic_hotkey(codec, fix, action);
Using IS_REACHABLE() is somewhat questionable here anyway since it
leads to the input code not working when the HDA driver is builtin
but input is in a loadable module. Replace this with a hard compile-time
dependency on CONFIG_INPUT. In practice this won't chance much
other than solve the compiler error because it is rare to require
sound output but no input support.
Fixes: f603b159231b ("ALSA: hda/realtek - add supported Mic Mute LED for Lenovo platform")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20250304142620.582191-1-arnd@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Murad Masimov <m.masimov@mt-integration.ru>
Date: Mon Mar 3 13:04:13 2025 +0300
ALSA: usx2y: validate nrpacks module parameter on probe
[ Upstream commit 172a0f509723fe4741d4b8e9190cf434b18320d8 ]
The module parameter defines number of iso packets per one URB. User is
allowed to set any value to the parameter of type int, which can lead to
various kinds of weird and incorrect behavior like integer overflows,
truncations, etc. Number of packets should be a small non-negative number.
Since this parameter is read-only, its value can be validated on driver
probe.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Murad Masimov <m.masimov@mt-integration.ru>
Link: https://patch.msgid.link/20250303100413.835-1-m.masimov@mt-integration.ru
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Nikolay Aleksandrov <razor@blackwall.org>
Date: Thu Feb 27 18:41:29 2025 +0200
be2net: fix sleeping while atomic bugs in be_ndo_bridge_getlink
[ Upstream commit 1a82d19ca2d6835904ee71e2d40fd331098f94a0 ]
Partially revert commit b71724147e73 ("be2net: replace polling with
sleeping in the FW completion path") w.r.t mcc mutex it introduces and the
use of usleep_range. The be2net be_ndo_bridge_getlink() callback is
called with rcu_read_lock, so this code has been broken for a long time.
Both the mutex_lock and the usleep_range can cause the issue Ian Kumlien
reported[1]. The call path is:
be_ndo_bridge_getlink -> be_cmd_get_hsw_config -> be_mcc_notify_wait ->
be_mcc_wait_compl -> usleep_range()
[1] https://lore.kernel.org/netdev/CAA85sZveppNgEVa_FD+qhOMtG_AavK9_mFiU+jWrMtXmwqefGA@mail.gmail.com/
Tested-by: Ian Kumlien <ian.kumlien@gmail.com>
Fixes: b71724147e73 ("be2net: replace polling with sleeping in the FW completion path")
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20250227164129.1201164-1-razor@blackwall.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Olivier Gayot <olivier.gayot@canonical.com>
Date: Wed Mar 5 10:21:54 2025 +0800
block: fix conversion of GPT partition name to 7-bit
commit e06472bab2a5393430cc2fbc3211cd3602422c1e upstream.
The utf16_le_to_7bit function claims to, naively, convert a UTF-16
string to a 7-bit ASCII string. By naively, we mean that it:
* drops the first byte of every character in the original UTF-16 string
* checks if all characters are printable, and otherwise replaces them
by exclamation mark "!".
This means that theoretically, all characters outside the 7-bit ASCII
range should be replaced by another character. Examples:
* lower-case alpha (ɒ) 0x0252 becomes 0x52 (R)
* ligature OE (œ) 0x0153 becomes 0x53 (S)
* hangul letter pieup (ㅂ) 0x3142 becomes 0x42 (B)
* upper-case gamma (Ɣ) 0x0194 becomes 0x94 (not printable) so gets
replaced by "!"
The result of this conversion for the GPT partition name is passed to
user-space as PARTNAME via udev, which is confusing and feels questionable.
However, there is a flaw in the conversion function itself. By dropping
one byte of each character and using isprint() to check if the remaining
byte corresponds to a printable character, we do not actually guarantee
that the resulting character is 7-bit ASCII.
This happens because we pass 8-bit characters to isprint(), which
in the kernel returns 1 for many values > 0x7f - as defined in ctype.c.
This results in many values which should be replaced by "!" to be kept
as-is, despite not being valid 7-bit ASCII. Examples:
* e with acute accent (é) 0x00E9 becomes 0xE9 - kept as-is because
isprint(0xE9) returns 1.
* euro sign (€) 0x20AC becomes 0xAC - kept as-is because isprint(0xAC)
returns 1.
This way has broken pyudev utility[1], fixes it by using a mask of 7 bits
instead of 8 bits before calling isprint.
Link: https://github.com/pyudev/pyudev/issues/490#issuecomment-2685794648 [1]
Link: https://lore.kernel.org/linux-block/4cac90c2-e414-4ebb-ae62-2a4589d9dc6e@canonical.com/
Cc: Mulhern <amulhern@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: stable@vger.kernel.org
Signed-off-by: Olivier Gayot <olivier.gayot@canonical.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250305022154.3903128-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Haoxiang Li <haoxiang_li2024@163.com>
Date: Fri Feb 21 16:58:01 2025 +0800
Bluetooth: Add check for mgmt_alloc_skb() in mgmt_device_connected()
commit d8df010f72b8a32aaea393e36121738bb53ed905 upstream.
Add check for the return value of mgmt_alloc_skb() in
mgmt_device_connected() to prevent null pointer dereference.
Fixes: e96741437ef0 ("Bluetooth: mgmt: Make use of mgmt_send_event_skb in MGMT_EV_DEVICE_CONNECTED")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Haoxiang Li <haoxiang_li2024@163.com>
Date: Fri Feb 21 16:49:47 2025 +0800
Bluetooth: Add check for mgmt_alloc_skb() in mgmt_remote_name()
commit f2176a07e7b19f73e05c805cf3d130a2999154cb upstream.
Add check for the return value of mgmt_alloc_skb() in
mgmt_remote_name() to prevent null pointer dereference.
Fixes: ba17bb62ce41 ("Bluetooth: Fix skb allocation in mgmt_remote_name() & mgmt_device_connected()")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Salah Triki <salah.triki@gmail.com>
Date: Fri Feb 21 22:32:59 2025 +0100
bluetooth: btusb: Initialize .owner field of force_poll_sync_fops
[ Upstream commit cbf85b9cb80bec6345ffe0368dfff98386f4714f ]
Initialize .owner field of force_poll_sync_fops to THIS_MODULE in order to
prevent btusb from being unloaded while its operations are in use.
Fixes: 800fe5ec302e ("Bluetooth: btusb: Add support for queuing during polling interval")
Signed-off-by: Salah Triki <salah.triki@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Michal Luczaj <mhal@rbox.co>
Date: Mon Nov 18 22:03:43 2024 +0100
bpf, vsock: Invoke proto::close on close()
commit 135ffc7becc82cfb84936ae133da7969220b43b2 upstream.
vsock defines a BPF callback to be invoked when close() is called. However,
this callback is never actually executed. As a result, a closed vsock
socket is not automatically removed from the sockmap/sockhash.
Introduce a dummy vsock_close() and make vsock_release() call proto::close.
Note: changes in __vsock_release() look messy, but it's only due to indent
level reduction and variables xmas tree reorder.
Fixes: 634f1a7110b4 ("vsock: support sockmap")
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Luigi Leonardi <leonardi@redhat.com>
Link: https://lore.kernel.org/r/20241118-vsock-bpf-poll-close-v1-3-f1b9669cacdc@rbox.co
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
[LL: There is no sockmap support for this kernel version. This patch has
been backported because it helps reduce conflicts on future backports]
Signed-off-by: Luigi Leonardi <leonardi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Date: Wed Jan 8 19:09:27 2025 +0530
bus: mhi: host: pci_generic: Use pci_try_reset_function() to avoid deadlock
commit a321d163de3d8aa38a6449ab2becf4b1581aed96 upstream.
There are multiple places from where the recovery work gets scheduled
asynchronously. Also, there are multiple places where the caller waits
synchronously for the recovery to be completed. One such place is during
the PM shutdown() callback.
If the device is not alive during recovery_work, it will try to reset the
device using pci_reset_function(). This function internally will take the
device_lock() first before resetting the device. By this time, if the lock
has already been acquired, then recovery_work will get stalled while
waiting for the lock. And if the lock was already acquired by the caller
which waits for the recovery_work to be completed, it will lead to
deadlock.
This is what happened on the X1E80100 CRD device when the device died
before shutdown() callback. Driver core calls the driver's shutdown()
callback while holding the device_lock() leading to deadlock.
And this deadlock scenario can occur on other paths as well, like during
the PM suspend() callback, where the driver core would hold the
device_lock() before calling driver's suspend() callback. And if the
recovery_work was already started, it could lead to deadlock. This is also
observed on the X1E80100 CRD.
So to fix both issues, use pci_try_reset_function() in recovery_work. This
function first checks for the availability of the device_lock() before
trying to reset the device. If the lock is available, it will acquire it
and reset the device. Otherwise, it will return -EAGAIN. If that happens,
recovery_work will fail with the error message "Recovery failed" as not
much could be done.
Cc: stable@vger.kernel.org # 5.12
Reported-by: Johan Hovold <johan@kernel.org>
Closes: https://lore.kernel.org/mhi/Z1me8iaK7cwgjL92@hovoldconsulting.com
Fixes: 7389337f0a78 ("mhi: pci_generic: Add suspend/resume/recovery procedure")
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Analyzed-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/mhi/Z2KKjWY2mPen6GPL@hovoldconsulting.com/
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Link: https://lore.kernel.org/r/20250108-mhi_recovery_fix-v1-1-a0a00a17da46@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Vitaliy Shevtsov <v.shevtsov@mt-integration.ru>
Date: Thu Feb 27 23:46:27 2025 +0500
caif_virtio: fix wrong pointer check in cfv_probe()
[ Upstream commit a466fd7e9fafd975949e5945e2f70c33a94b1a70 ]
del_vqs() frees virtqueues, therefore cfv->vq_tx pointer should be checked
for NULL before calling it, not cfv->vdev. Also the current implementation
is redundant because the pointer cfv->vdev is dereferenced before it is
checked for NULL.
Fix this by checking cfv->vq_tx for NULL instead of cfv->vdev before
calling del_vqs().
Fixes: 0d2e1a2926b1 ("caif_virtio: Introduce caif over virtio")
Signed-off-by: Vitaliy Shevtsov <v.shevtsov@mt-integration.ru>
Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Link: https://patch.msgid.link/20250227184716.4715-1-v.shevtsov@mt-integration.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Peter Zijlstra <peterz@infradead.org>
Date: Thu Jan 12 20:43:34 2023 +0100
cpuidle, intel_idle: Fix CPUIDLE_FLAG_IBRS
[ Upstream commit 9b461a6faae7b220c32466261965778b10189e54 ]
objtool to the rescue:
vmlinux.o: warning: objtool: intel_idle_ibrs+0x17: call to spec_ctrl_current() leaves .noinstr.text section
vmlinux.o: warning: objtool: intel_idle_ibrs+0x27: call to wrmsrl.constprop.0() leaves .noinstr.text section
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230112195540.556912863@infradead.org
Stable-dep-of: c157d351460b ("intel_idle: Handle older CPUs, which stop the TSC in deeper C states, correctly")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date: Tue Feb 18 10:14:11 2025 +0100
dma: kmsan: export kmsan_handle_dma() for modules
commit 19fac3c93991502a22c5132824c40b6a2e64b136 upstream.
kmsan_handle_dma() is used by virtio_ring() which can be built as a
module. kmsan_handle_dma() needs to be exported otherwise building the
virtio_ring fails.
Export kmsan_handle_dma for modules.
Link: https://lkml.kernel.org/r/20250218091411.MMS3wBN9@linutronix.de
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202502150634.qjxwSeJR-lkp@intel.com/
Fixes: 7ade4f10779c ("dma: kmsan: unpoison DMA mappings")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Macro Elver <elver@google.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Luca Ceresoli <luca.ceresoli@bootlin.com>
Date: Thu Feb 13 15:05:13 2025 +0100
drivers: core: fix device leak in __fw_devlink_relax_cycles()
commit 78eb41f518f414378643ab022241df2a9dcd008b upstream.
Commit bac3b10b78e5 ("driver core: fw_devlink: Stop trying to optimize
cycle detection logic") introduced a new struct device *con_dev and a
get_dev_from_fwnode() call to get it, but without adding a corresponding
put_device().
Closes: https://lore.kernel.org/all/20241204124826.2e055091@booty/
Fixes: bac3b10b78e5 ("driver core: fw_devlink: Stop trying to optimize cycle detection logic")
Cc: stable@vger.kernel.org
Reviewed-by: Saravana Kannan <saravanak@google.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://lore.kernel.org/r/20250213-fix__fw_devlink_relax_cycles_missing_device_put-v2-1-8cd3b03e6a3f@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Haoyu Li <lihaoyu499@gmail.com>
Date: Thu Jan 30 19:58:11 2025 +0800
drivers: virt: acrn: hsm: Use kzalloc to avoid info leak in pmcmd_ioctl
commit 819cec1dc47cdeac8f5dd6ba81c1dbee2a68c3bb upstream.
In the "pmcmd_ioctl" function, three memory objects allocated by
kmalloc are initialized by "hcall_get_cpu_state", which are then
copied to user space. The initializer is indeed implemented in
"acrn_hypercall2" (arch/x86/include/asm/acrn.h). There is a risk of
information leakage due to uninitialized bytes.
Fixes: 3d679d5aec64 ("virt: acrn: Introduce interfaces to query C-states and P-states allowed by hypervisor")
Signed-off-by: Haoyu Li <lihaoyu499@gmail.com>
Cc: stable <stable@kernel.org>
Acked-by: Fei Li <fei1.li@intel.com>
Link: https://lore.kernel.org/r/20250130115811.92424-1-lihaoyu499@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Ma Ke <make24@iscas.ac.cn>
Date: Wed Feb 26 16:37:31 2025 +0800
drm/amd/display: Fix null check for pipe_ctx->plane_state in resource_build_scaling_params
commit 374c9faac5a763a05bc3f68ad9f73dab3c6aec90 upstream.
Null pointer dereference issue could occur when pipe_ctx->plane_state
is null. The fix adds a check to ensure 'pipe_ctx->plane_state' is not
null before accessing. This prevents a null pointer dereference.
Found by code review.
Fixes: 3be5262e353b ("drm/amd/display: Rename more dc_surface stuff to plane_state")
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 63e6a77ccf239337baa9b1e7787cde9fa0462092)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Ma Jun <Jun.Ma2@amd.com>
Date: Mon Dec 18 11:32:06 2023 +0800
drm/amdgpu: Check extended configuration space register when system uses large bar
[ Upstream commit e372baeb3d336b20fd9463784c577fd8824497cd ]
Some customer platforms do not enable mmconfig for various reasons,
such as bios bug, and therefore cannot access the GPU extend configuration
space through mmio.
When the system enters the d3cold state and resumes, the amdgpu driver
fails to resume because the extend configuration space registers of
GPU can't be restored. At this point, Usually we only see some failure
dmesg log printed by amdgpu driver, it is difficult to find the root
cause.
Therefor print a warnning message if the system can't access the
extended configuration space register when using large bar.
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 099bffc7cadf ("drm/amdgpu: disable BAR resize on Dell G5 SE")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Alex Deucher <alexander.deucher@amd.com>
Date: Mon Feb 17 10:55:05 2025 -0500
drm/amdgpu: disable BAR resize on Dell G5 SE
[ Upstream commit 099bffc7cadff40bfab1517c3461c53a7a38a0d7 ]
There was a quirk added to add a workaround for a Sapphire
RX 5600 XT Pulse that didn't allow BAR resizing. However,
the quirk caused a regression with runtime pm on Dell laptops
using those chips, rather than narrowing the scope of the
resizing quirk, add a quirk to prevent amdgpu from resizing
the BAR on those Dell platforms unless runtime pm is disabled.
v2: update commit message, add runpm check
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/1707
Fixes: 907830b0fc9e ("PCI: Add a REBAR size quirk for Sapphire RX 5600 XT Pulse")
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 5235053f443cef4210606e5fb71f99b915a9723d)
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Richard Thier <u9vata@gmail.com>
Date: Mon Jun 17 23:46:27 2019 +0200
drm/radeon: Fix rs400_gpu_init for ATI mobility radeon Xpress 200M
commit 29ffeb73b216ce3eff10229eb077cf9b7812119d upstream.
num_gb_pipes was set to a wrong value using r420_pipe_config
This have lead to HyperZ glitches on fast Z clearing.
Closes: https://bugs.freedesktop.org/show_bug.cgi?id=110897
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Richard Thier <u9vata@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 044e59a85c4d84e3c8d004c486e5c479640563a6)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Philipp Stanner <phasta@kernel.org>
Date: Tue Feb 18 13:41:50 2025 +0100
drm/sched: Fix preprocessor guard
[ Upstream commit 23e0832d6d7be2d3c713f9390c060b6f1c48bf36 ]
When writing the header guard for gpu_scheduler_trace.h, a typo,
apparently, occurred.
Fix the typo and document the scope of the guard.
Fixes: 353da3c520b4 ("drm/amdgpu: add tracepoint for scheduler (v2)")
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250218124149.118002-2-phasta@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Date: Fri Feb 7 00:03:11 2025 +0200
eeprom: digsy_mtc: Make GPIO lookup table match the device
commit 038ef0754aae76f79b147b8867f9250e6a976872 upstream.
The dev_id value in the GPIO lookup table must match to
the device instance name, which in this case is combined
of name and platform device ID, i.e. "spi_gpio.1". But
the table assumed that there was no platform device ID
defined, which is wrong. Fix the dev_id value accordingly.
Fixes: 9b00bc7b901f ("spi: spi-gpio: Rewrite to use GPIO descriptors")
Cc: stable <stable@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250206220311.1554075-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Namjae Jeon <linkinjeon@kernel.org>
Date: Fri Jan 31 12:55:55 2025 +0900
exfat: fix soft lockup in exfat_clear_bitmap
[ Upstream commit 9da33619e0ca53627641bc97d1b93ec741299111 ]
bitmap clear loop will take long time in __exfat_free_cluster()
if data size of file/dir enty is invalid.
If cluster bit in bitmap is already clear, stop clearing bitmap go to
out of loop.
Fixes: 31023864e67a ("exfat: add fat entry operations")
Reported-by: Kun Hu <huk23@m.fudan.edu.cn>, Jiaji Qin <jjtan24@m.fudan.edu.cn>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Date: Mon Aug 19 16:26:59 2024 +0300
fs/ntfs3: Add rough attr alloc_size check
commit c4a8ba334262e9a5c158d618a4820e1b9c12495c upstream.
Reported-by: syzbot+c6d94bedd910a8216d25@syzkaller.appspotmail.com
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Bin Lan <bin.lan.cn@windriver.com>
Signed-off-by: He Zhe <zhe.he@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Koichiro Den <koichiro.den@canonical.com>
Date: Mon Feb 24 23:31:26 2025 +0900
gpio: aggregator: protect driver attr handlers against module unload
commit 12f65d1203507f7db3ba59930fe29a3b8eee9945 upstream.
Both new_device_store and delete_device_store touch module global
resources (e.g. gpio_aggregator_lock). To prevent race conditions with
module unload, a reference needs to be held.
Add try_module_get() in these handlers.
For new_device_store, this eliminates what appears to be the most dangerous
scenario: if an id is allocated from gpio_aggregator_idr but
platform_device_register has not yet been called or completed, a concurrent
module unload could fail to unregister/delete the device, leaving behind a
dangling platform device/GPIO forwarder. This can result in various issues.
The following simple reproducer demonstrates these problems:
#!/bin/bash
while :; do
# note: whether 'gpiochip0 0' exists or not does not matter.
echo 'gpiochip0 0' > /sys/bus/platform/drivers/gpio-aggregator/new_device
done &
while :; do
modprobe gpio-aggregator
modprobe -r gpio-aggregator
done &
wait
Starting with the following warning, several kinds of warnings will appear
and the system may become unstable:
------------[ cut here ]------------
list_del corruption, ffff888103e2e980->next is LIST_POISON1 (dead000000000100)
WARNING: CPU: 1 PID: 1327 at lib/list_debug.c:56 __list_del_entry_valid_or_report+0xa3/0x120
[...]
RIP: 0010:__list_del_entry_valid_or_report+0xa3/0x120
[...]
Call Trace:
<TASK>
? __list_del_entry_valid_or_report+0xa3/0x120
? __warn.cold+0x93/0xf2
? __list_del_entry_valid_or_report+0xa3/0x120
? report_bug+0xe6/0x170
? __irq_work_queue_local+0x39/0xe0
? handle_bug+0x58/0x90
? exc_invalid_op+0x13/0x60
? asm_exc_invalid_op+0x16/0x20
? __list_del_entry_valid_or_report+0xa3/0x120
gpiod_remove_lookup_table+0x22/0x60
new_device_store+0x315/0x350 [gpio_aggregator]
kernfs_fop_write_iter+0x137/0x1f0
vfs_write+0x262/0x430
ksys_write+0x60/0xd0
do_syscall_64+0x6c/0x180
entry_SYSCALL_64_after_hwframe+0x76/0x7e
[...]
</TASK>
---[ end trace 0000000000000000 ]---
Fixes: 828546e24280 ("gpio: Add GPIO Aggregator")
Cc: stable@vger.kernel.org
Signed-off-by: Koichiro Den <koichiro.den@canonical.com>
Link: https://lore.kernel.org/r/20250224143134.3024598-2-koichiro.den@canonical.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Date: Wed Mar 5 16:37:50 2025 +0000
gpio: rcar: Fix missing of_node_put() call
[ Upstream commit 391b41f983bf7ff853de44704d8e14e7cc648a9b ]
of_parse_phandle_with_fixed_args() requires its caller to
call into of_node_put() on the node pointer from the output
structure, but such a call is currently missing.
Call into of_node_put() to rectify that.
Fixes: 159f8a0209af ("gpio-rcar: Add DT support")
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20250305163753.34913-2-fabrizio.castro.jz@renesas.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Date: Tue Jan 21 14:58:33 2025 +0100
gpio: rcar: Use raw_spinlock to protect register access
commit f02c41f87cfe61440c18bf77d1ef0a884b9ee2b5 upstream.
Use raw_spinlock in order to fix spurious messages about invalid context
when spinlock debugging is enabled. The lock is only used to serialize
register access.
[ 4.239592] =============================
[ 4.239595] [ BUG: Invalid wait context ]
[ 4.239599] 6.13.0-rc7-arm64-renesas-05496-gd088502a519f #35 Not tainted
[ 4.239603] -----------------------------
[ 4.239606] kworker/u8:5/76 is trying to lock:
[ 4.239609] ffff0000091898a0 (&p->lock){....}-{3:3}, at: gpio_rcar_config_interrupt_input_mode+0x34/0x164
[ 4.239641] other info that might help us debug this:
[ 4.239643] context-{5:5}
[ 4.239646] 5 locks held by kworker/u8:5/76:
[ 4.239651] #0: ffff0000080fb148 ((wq_completion)async){+.+.}-{0:0}, at: process_one_work+0x190/0x62c
[ 4.250180] OF: /soc/sound@ec500000/ports/port@0/endpoint: Read of boolean property 'frame-master' with a value.
[ 4.254094] #1: ffff80008299bd80 ((work_completion)(&entry->work)){+.+.}-{0:0}, at: process_one_work+0x1b8/0x62c
[ 4.254109] #2: ffff00000920c8f8
[ 4.258345] OF: /soc/sound@ec500000/ports/port@1/endpoint: Read of boolean property 'bitclock-master' with a value.
[ 4.264803] (&dev->mutex){....}-{4:4}, at: __device_attach_async_helper+0x3c/0xdc
[ 4.264820] #3: ffff00000a50ca40 (request_class#2){+.+.}-{4:4}, at: __setup_irq+0xa0/0x690
[ 4.264840] #4:
[ 4.268872] OF: /soc/sound@ec500000/ports/port@1/endpoint: Read of boolean property 'frame-master' with a value.
[ 4.273275] ffff00000a50c8c8 (lock_class){....}-{2:2}, at: __setup_irq+0xc4/0x690
[ 4.296130] renesas_sdhi_internal_dmac ee100000.mmc: mmc1 base at 0x00000000ee100000, max clock rate 200 MHz
[ 4.304082] stack backtrace:
[ 4.304086] CPU: 1 UID: 0 PID: 76 Comm: kworker/u8:5 Not tainted 6.13.0-rc7-arm64-renesas-05496-gd088502a519f #35
[ 4.304092] Hardware name: Renesas Salvator-X 2nd version board based on r8a77965 (DT)
[ 4.304097] Workqueue: async async_run_entry_fn
[ 4.304106] Call trace:
[ 4.304110] show_stack+0x14/0x20 (C)
[ 4.304122] dump_stack_lvl+0x6c/0x90
[ 4.304131] dump_stack+0x14/0x1c
[ 4.304138] __lock_acquire+0xdfc/0x1584
[ 4.426274] lock_acquire+0x1c4/0x33c
[ 4.429942] _raw_spin_lock_irqsave+0x5c/0x80
[ 4.434307] gpio_rcar_config_interrupt_input_mode+0x34/0x164
[ 4.440061] gpio_rcar_irq_set_type+0xd4/0xd8
[ 4.444422] __irq_set_trigger+0x5c/0x178
[ 4.448435] __setup_irq+0x2e4/0x690
[ 4.452012] request_threaded_irq+0xc4/0x190
[ 4.456285] devm_request_threaded_irq+0x7c/0xf4
[ 4.459398] ata1: link resume succeeded after 1 retries
[ 4.460902] mmc_gpiod_request_cd_irq+0x68/0xe0
[ 4.470660] mmc_start_host+0x50/0xac
[ 4.474327] mmc_add_host+0x80/0xe4
[ 4.477817] tmio_mmc_host_probe+0x2b0/0x440
[ 4.482094] renesas_sdhi_probe+0x488/0x6f4
[ 4.486281] renesas_sdhi_internal_dmac_probe+0x60/0x78
[ 4.491509] platform_probe+0x64/0xd8
[ 4.495178] really_probe+0xb8/0x2a8
[ 4.498756] __driver_probe_device+0x74/0x118
[ 4.503116] driver_probe_device+0x3c/0x154
[ 4.507303] __device_attach_driver+0xd4/0x160
[ 4.511750] bus_for_each_drv+0x84/0xe0
[ 4.515588] __device_attach_async_helper+0xb0/0xdc
[ 4.520470] async_run_entry_fn+0x30/0xd8
[ 4.524481] process_one_work+0x210/0x62c
[ 4.528494] worker_thread+0x1ac/0x340
[ 4.532245] kthread+0x10c/0x110
[ 4.535476] ret_from_fork+0x10/0x20
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250121135833.3769310-1-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Daniil Dulov <d.dulov@aladdin.ru>
Date: Mon Feb 24 20:30:30 2025 +0300
HID: appleir: Fix potential NULL dereference at raw event handle
commit 2ff5baa9b5275e3acafdf7f2089f74cccb2f38d1 upstream.
Syzkaller reports a NULL pointer dereference issue in input_event().
BUG: KASAN: null-ptr-deref in instrument_atomic_read include/linux/instrumented.h:68 [inline]
BUG: KASAN: null-ptr-deref in _test_bit include/asm-generic/bitops/instrumented-non-atomic.h:141 [inline]
BUG: KASAN: null-ptr-deref in is_event_supported drivers/input/input.c:67 [inline]
BUG: KASAN: null-ptr-deref in input_event+0x42/0xa0 drivers/input/input.c:395
Read of size 8 at addr 0000000000000028 by task syz-executor199/2949
CPU: 0 UID: 0 PID: 2949 Comm: syz-executor199 Not tainted 6.13.0-rc4-syzkaller-00076-gf097a36ef88d #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120
kasan_report+0xd9/0x110 mm/kasan/report.c:602
check_region_inline mm/kasan/generic.c:183 [inline]
kasan_check_range+0xef/0x1a0 mm/kasan/generic.c:189
instrument_atomic_read include/linux/instrumented.h:68 [inline]
_test_bit include/asm-generic/bitops/instrumented-non-atomic.h:141 [inline]
is_event_supported drivers/input/input.c:67 [inline]
input_event+0x42/0xa0 drivers/input/input.c:395
input_report_key include/linux/input.h:439 [inline]
key_down drivers/hid/hid-appleir.c:159 [inline]
appleir_raw_event+0x3e5/0x5e0 drivers/hid/hid-appleir.c:232
__hid_input_report.constprop.0+0x312/0x440 drivers/hid/hid-core.c:2111
hid_ctrl+0x49f/0x550 drivers/hid/usbhid/hid-core.c:484
__usb_hcd_giveback_urb+0x389/0x6e0 drivers/usb/core/hcd.c:1650
usb_hcd_giveback_urb+0x396/0x450 drivers/usb/core/hcd.c:1734
dummy_timer+0x17f7/0x3960 drivers/usb/gadget/udc/dummy_hcd.c:1993
__run_hrtimer kernel/time/hrtimer.c:1739 [inline]
__hrtimer_run_queues+0x20a/0xae0 kernel/time/hrtimer.c:1803
hrtimer_run_softirq+0x17d/0x350 kernel/time/hrtimer.c:1820
handle_softirqs+0x206/0x8d0 kernel/softirq.c:561
__do_softirq kernel/softirq.c:595 [inline]
invoke_softirq kernel/softirq.c:435 [inline]
__irq_exit_rcu+0xfa/0x160 kernel/softirq.c:662
irq_exit_rcu+0x9/0x30 kernel/softirq.c:678
instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1049 [inline]
sysvec_apic_timer_interrupt+0x90/0xb0 arch/x86/kernel/apic/apic.c:1049
</IRQ>
<TASK>
asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:702
__mod_timer+0x8f6/0xdc0 kernel/time/timer.c:1185
add_timer+0x62/0x90 kernel/time/timer.c:1295
schedule_timeout+0x11f/0x280 kernel/time/sleep_timeout.c:98
usbhid_wait_io+0x1c7/0x380 drivers/hid/usbhid/hid-core.c:645
usbhid_init_reports+0x19f/0x390 drivers/hid/usbhid/hid-core.c:784
hiddev_ioctl+0x1133/0x15b0 drivers/hid/usbhid/hiddev.c:794
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:906 [inline]
__se_sys_ioctl fs/ioctl.c:892 [inline]
__x64_sys_ioctl+0x190/0x200 fs/ioctl.c:892
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
This happens due to the malformed report items sent by the emulated device
which results in a report, that has no fields, being added to the report list.
Due to this appleir_input_configured() is never called, hidinput_connect()
fails which results in the HID_CLAIMED_INPUT flag is not being set. However,
it does not make appleir_probe() fail and lets the event callback to be
called without the associated input device.
Thus, add a check for the HID_CLAIMED_INPUT flag and leave the event hook
early if the driver didn't claim any input_dev for some reason. Moreover,
some other hid drivers accessing input_dev in their event callbacks do have
similar checks, too.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: 9a4a5574ce42 ("HID: appleir: add support for Apple ir devices")
Cc: stable@vger.kernel.org
Signed-off-by: Daniil Dulov <d.dulov@aladdin.ru>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Yu-Chun Lin <eleanor15x@gmail.com>
Date: Tue Feb 18 00:50:13 2025 +0800
HID: google: fix unused variable warning under !CONFIG_ACPI
[ Upstream commit 4bd0725c09f377ffaf22b834241f6c050742e4fc ]
As reported by the kernel test robot, the following warning occurs:
>> drivers/hid/hid-google-hammer.c:261:36: warning: 'cbas_ec_acpi_ids' defined but not used [-Wunused-const-variable=]
261 | static const struct acpi_device_id cbas_ec_acpi_ids[] = {
| ^~~~~~~~~~~~~~~~
The 'cbas_ec_acpi_ids' array is only used when CONFIG_ACPI is enabled.
Wrapping its definition and 'MODULE_DEVICE_TABLE' in '#ifdef CONFIG_ACPI'
prevents a compiler warning when ACPI is disabled.
Fixes: eb1aac4c8744f75 ("HID: google: add support tablet mode switch for Whiskers")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202501201141.jctFH5eB-lkp@intel.com/
Signed-off-by: Yu-Chun Lin <eleanor15x@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Zhang Lixu <lixu.zhang@intel.com>
Date: Tue Feb 18 14:37:30 2025 +0800
HID: intel-ish-hid: Fix use-after-free issue in ishtp_hid_remove()
[ Upstream commit 07583a0010696a17fb0942e0b499a62785c5fc9f ]
The system can experience a random crash a few minutes after the driver is
removed. This issue occurs due to improper handling of memory freeing in
the ishtp_hid_remove() function.
The function currently frees the `driver_data` directly within the loop
that destroys the HID devices, which can lead to accessing freed memory.
Specifically, `hid_destroy_device()` uses `driver_data` when it calls
`hid_ishtp_set_feature()` to power off the sensor, so freeing
`driver_data` beforehand can result in accessing invalid memory.
This patch resolves the issue by storing the `driver_data` in a temporary
variable before calling `hid_destroy_device()`, and then freeing the
`driver_data` after the device is destroyed.
Fixes: 0b28cb4bcb17 ("HID: intel-ish-hid: ISH HID client driver")
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Erik Schumacher <erik.schumacher@iris-sensing.com>
Date: Mon Feb 24 09:19:04 2025 +0000
hwmon: (ad7314) Validate leading zero bits and return error
[ Upstream commit e278d5e8aef4c0a1d9a9fa8b8910d713a89aa800 ]
Leading zero bits are sent on the bus before the temperature value is
transmitted. If any of these bits are high, the connection might be
unstable or there could be no AD7314 / ADT730x (or compatible) at all.
Return -EIO in that case.
Signed-off-by: Erik Schumacher <erik.schumacher@iris-sensing.com>
Fixes: 4f3a659581cab ("hwmon: AD7314 driver (ported from IIO)")
Link: https://lore.kernel.org/r/24a50c2981a318580aca8f50d23be7987b69ea00.camel@iris-sensing.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Maud Spierings <maudspierings@gocontroll.com>
Date: Thu Feb 27 13:57:53 2025 +0100
hwmon: (ntc_thermistor) Fix the ncpXXxh103 sensor table
[ Upstream commit 1c7932d5ae0f5c22fa52ac811b4c427bbca5aff5 ]
I could not find a single table that has the values currently present in
the table, change it to the actual values that can be found in [1]/[2]
and [3] (page 15 column 2)
[1]: https://www.murata.com/products/productdetail?partno=NCP15XH103F03RC
[2]: https://www.murata.com/products/productdata/8796836626462/NTHCG83.txt?1437969843000
[3]: https://nl.mouser.com/datasheet/2/281/r44e-522712.pdf
Fixes: 54ce3a0d8011 ("hwmon: (ntc_thermistor) Add support for ncpXXxh103")
Signed-off-by: Maud Spierings <maudspierings@gocontroll.com>
Link: https://lore.kernel.org/r/20250227-ntc_thermistor_fixes-v1-3-70fa73200b52@gocontroll.com
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Titus Rwantare <titusr@google.com>
Date: Thu Feb 27 22:24:55 2025 +0000
hwmon: (pmbus) Initialise page count in pmbus_identify()
[ Upstream commit 6b6e2e8fd0de3fa7c6f4f8fe6841b01770b2e7bc ]
The `pmbus_identify()` function fails to correctly determine the number
of supported pages on PMBus devices. This occurs because `info->pages`
is implicitly zero-initialised, and `pmbus_set_page()` does not perform
writes to the page register if `info->pages` is not yet initialised.
Without this patch, `info->pages` is always set to the maximum after
scanning.
This patch initialises `info->pages` to `PMBUS_PAGES` before the probing
loop, enabling `pmbus_set_page()` writes to make it out onto the bus
correctly identifying the number of pages. `PMBUS_PAGES` seemed like a
reasonable non-zero number because that's the current result of the
identification process.
Testing was done with a PMBus device in QEMU.
Signed-off-by: Titus Rwantare <titusr@google.com>
Fixes: 442aba78728e7 ("hwmon: PMBus device driver")
Link: https://lore.kernel.org/r/20250227222455.2583468-1-titusr@google.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Xinghuo Chen <xinghuo.chen@foxmail.com>
Date: Mon Mar 3 07:57:33 2025 -0500
hwmon: fix a NULL vs IS_ERR_OR_NULL() check in xgene_hwmon_probe()
[ Upstream commit 10fce7ebe888fa8c97eee7e317a47e7603e5e78d ]
The devm_memremap() function returns error pointers on error,
it doesn't return NULL.
Fixes: c7cefce03e69 ("hwmon: (xgene) access mailbox as RAM")
Signed-off-by: Xinghuo Chen <xinghuo.chen@foxmail.com>
Link: https://lore.kernel.org/r/tencent_9AD8E7683EC29CAC97496B44F3F865BA070A@qq.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Nick Child <nnac123@linux.ibm.com>
Date: Tue Oct 1 11:32:00 2024 -0500
ibmvnic: Inspect header requirements before using scrq direct
[ Upstream commit de390657b5d6f7deb9d1d36aaf45f02ba51ec9dc ]
Previously, the TX header requirement for standard frames was ignored.
This requirement is a bitstring sent from the VIOS which maps to the
type of header information needed during TX. If no header information,
is needed then send subcrq direct can be used (which can be more
performant).
This bitstring was previously ignored for standard packets (AKA non LSO,
non CSO) due to the belief that the bitstring was over-cautionary. It
turns out that there are some configurations where the backing device
does need header information for transmission of standard packets. If
the information is not supplied then this causes continuous "Adapter
error" transport events. Therefore, this bitstring should be respected
and observed before considering the use of send subcrq direct.
Fixes: 74839f7a8268 ("ibmvnic: Introduce send sub-crq direct")
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241001163200.1802522-2-nnac123@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Nick Child <nnac123@linux.ibm.com>
Date: Wed Aug 7 16:18:09 2024 -0500
ibmvnic: Perform tx CSO during send scrq direct
[ Upstream commit e633e32b60fd6701bed73599b273a2a03621ea54 ]
During initialization with the vnic server, a bitstring is communicated
to the client regarding header info needed during CSO (See "VNIC
Capabilities" in PAPR). Most of the time, to be safe, vnic server
requests header info for CSO. When header info is needed, multiple TX
descriptors are required per skb; This limits the driver to use
send_subcrq_indirect instead of send_subcrq_direct.
Previously, the vnic server request for header info was ignored. This
allowed the use of send_sub_crq_direct. Transmissions were successful
because the bitstring returned by vnic server is broad and over
cautionary. It was observed that mlx backing devices could actually
transmit and handle CSO packets without the vnic server receiving
header info (despite the fact that the bitstring requested it).
There was a trust issue: The bitstring was overcautionary. This extra
precaution (requesting header info when the backing device may not use
it) comes at the cost of performance (using direct vs indirect hcalls
has a 30% delta in small packet RR transaction rate). So it has been
requested that the vnic server team tries to ensure that the bitstring
is more exact. In the meantime, disable CSO when it is possible to use
the skb in the send_subcrq_direct path. In other words, calculate the
checksum before handing the packet to FW when the packet is not
segmented and xmit_more is false.
Since the code path is only possible if the skb is non GSO and xmit_more
is false, the cost of doing checksum in the send_subcrq_direct path is
minimal. Any large segmented skb will have xmit_more set to true more
frequently and it is inexpensive to do checksumming on a small skb.
The worst-case workload would be a 9000 MTU TCP_RR test with close
to MTU sized packets (and TSO off). This allows xmit_more to be false
more frequently and open the code path up to use send_subcrq_direct.
Observing trace data (graph-time = 1) and packet rate with this workload
shows minimal performance degradation:
1. NIC does checksum w headers, safely use send_subcrq_indirect:
- Packet rate: 631k txs
- Trace data:
ibmvnic_xmit = 44344685.87 us / 6234576 hits = AVG 7.11 us
skb_checksum_help = 4.07 us / 2 hits = AVG 2.04 us
^ Notice hits, tracing this just for reassurance
ibmvnic_tx_scrq_flush = 33040649.69 us / 5638441 hits = AVG 5.86 us
send_subcrq_indirect = 37438922.24 us / 6030859 hits = AVG 6.21 us
2. NIC does checksum w/o headers, dangerously use send_subcrq_direct:
- Packet rate: 831k txs
- Trace data:
ibmvnic_xmit = 48940092.29 us / 8187630 hits = AVG 5.98 us
skb_checksum_help = 2.03 us / 1 hits = AVG 2.03
ibmvnic_tx_scrq_flush = 31141879.57 us / 7948960 hits = AVG 3.92 us
send_subcrq_indirect = 8412506.03 us / 728781 hits = AVG 11.54
^ notice hits is much lower b/c send_subcrq_direct was called
^ wasn't traceable
3. driver does checksum, safely use send_subcrq_direct (THIS PATCH):
- Packet rate: 829k txs
- Trace data:
ibmvnic_xmit = 56696077.63 us / 8066168 hits = AVG 7.03 us
skb_checksum_help = 8587456.16 us / 7526072 hits = AVG 1.14 us
ibmvnic_tx_scrq_flush = 30219545.55 us / 7782409 hits = AVG 3.88 us
send_subcrq_indirect = 8638326.44 us / 763693 hits = AVG 11.31 us
When the bitstring ever specifies that CSO does not require headers
(dependent on VIOS vnic server changes), then this patch should be
removed and replaced with one that investigates the bitstring before
using send_subcrq_direct.
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Link: https://patch.msgid.link/20240807211809.1259563-8-nnac123@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: de390657b5d6 ("ibmvnic: Inspect header requirements before using scrq direct")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Nayab Sayed <nayabbasha.sayed@microchip.com>
Date: Wed Jan 15 11:37:04 2025 +0530
iio: adc: at91-sama5d2_adc: fix sama7g5 realbits value
commit aa5119c36d19639397d29ef305aa53a5ecd72b27 upstream.
The number of valid bits in SAMA7G5 ADC channel data register are 16.
Hence changing the realbits value to 16
Fixes: 840bf6cb983f ("iio: adc: at91-sama5d2_adc: add support for sama7g5 device")
Signed-off-by: Nayab Sayed <nayabbasha.sayed@microchip.com>
Link: https://patch.msgid.link/20250115-fix-sama7g5-adc-realbits-v2-1-58a6e4087584@microchip.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Angelo Dureghello <adureghello@baylibre.com>
Date: Sat Jan 25 17:24:32 2025 +0100
iio: dac: ad3552r: clear reset status flag
commit e17b9f20da7d2bc1f48878ab2230523b2512d965 upstream.
Clear reset status flag, to keep error status register clean after reset
(ad3552r manual, rev B table 38).
Reset error flag was left to 1, so debugging registers, the "Error
Status Register" was dirty (0x01). It is important to clear this bit, so
if there is any reset event over normal working mode, it is possible to
detect it.
Fixes: 8f2b54824b28 ("drivers:iio:dac: Add AD3552R driver support")
Signed-off-by: Angelo Dureghello <adureghello@baylibre.com>
Link: https://patch.msgid.link/20250125-wip-bl-ad3552r-clear-reset-v2-1-aa3a27f3ff8c@baylibre.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Sam Winchenbach <swinchenbach@arka.org>
Date: Mon Feb 3 13:34:34 2025 +0000
iio: filter: admv8818: Force initialization of SDO
commit cc2c3540d9477a9931fb0fd851fcaeba524a5b35 upstream.
When a weak pull-up is present on the SDO line, regmap_update_bits fails
to write both the SOFTRESET and SDOACTIVE bits because it incorrectly
reads them as already set.
Since the soft reset disables the SDO line, performing a
read-modify-write operation on ADI_SPI_CONFIG_A to enable the SDO line
doesn't make sense. This change directly writes to the register instead
of using regmap_update_bits.
Fixes: f34fe888ad05 ("iio:filter:admv8818: add support for ADMV8818")
Signed-off-by: Sam Winchenbach <swinchenbach@arka.org>
Link: https://patch.msgid.link/SA1P110MB106904C961B0F3FAFFED74C0BCF5A@SA1P110MB1069.NAMP110.PROD.OUTLOOK.COM
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Pawel Chmielewski <pawel.chmielewski@intel.com>
Date: Tue Feb 11 20:50:15 2025 +0200
intel_th: pci: Add Arrow Lake support
commit b5edccae9f447a92d475267d94c33f4926963eec upstream.
Add support for the Trace Hub in Arrow Lake.
Signed-off-by: Pawel Chmielewski <pawel.chmielewski@intel.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20250211185017.1759193-4-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Date: Tue Feb 11 20:50:16 2025 +0200
intel_th: pci: Add Panther Lake-H support
commit a70034d6c0d5f3cdee40bb00a578e17fd2ebe426 upstream.
Add support for the Trace Hub in Panther Lake-H.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20250211185017.1759193-5-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Date: Tue Feb 11 20:50:17 2025 +0200
intel_th: pci: Add Panther Lake-P/U support
commit 49114ff05770264ae233f50023fc64a719a9dcf9 upstream.
Add support for the Trace Hub in Panther Lake-P/U.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20250211185017.1759193-6-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Date: Mon Feb 17 08:27:54 2025 +0100
kbuild: userprogs: use correct lld when linking through clang
commit dfc1b168a8c4b376fa222b27b97c2c4ad4b786e1 upstream.
The userprog infrastructure links objects files through $(CC).
Either explicitly by manually calling $(CC) on multiple object files or
implicitly by directly compiling a source file to an executable.
The documentation at Documentation/kbuild/llvm.rst indicates that ld.lld
would be used for linking if LLVM=1 is specified.
However clang instead will use either a globally installed cross linker
from $PATH called ${target}-ld or fall back to the system linker, which
probably does not support crosslinking.
For the normal kernel build this is not an issue because the linker is
always executed directly, without the compiler being involved.
Explicitly pass --ld-path to clang so $(LD) is respected.
As clang 13.0.1 is required to build the kernel, this option is available.
Fixes: 7f3a59db274c ("kbuild: add infrastructure to build userspace programs")
Cc: stable@vger.kernel.org # needs wrapping in $(cc-option) for < 6.9
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
[nathan: use cc-option for 6.6 and older, as those trees support back to
clang-11]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Namjae Jeon <linkinjeon@kernel.org>
Date: Thu Feb 27 15:49:10 2025 +0900
ksmbd: fix bug on trap in smb2_lock
commit e26e2d2e15daf1ab33e0135caf2304a0cfa2744b upstream.
If lock count is greater than 1, flags could be old value.
It should be checked with flags of smb_lock, not flags.
It will cause bug-on trap from locks_free_lock in error handling
routine.
Cc: stable@vger.kernel.org
Reported-by: Norbert Szetei <norbert@doyensec.com>
Tested-by: Norbert Szetei <norbert@doyensec.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Namjae Jeon <linkinjeon@kernel.org>
Date: Fri Feb 21 14:16:23 2025 +0900
ksmbd: fix type confusion via race condition when using ipc_msg_send_request
commit e2ff19f0b7a30e03516e6eb73b948e27a55bc9d2 upstream.
req->handle is allocated using ksmbd_acquire_id(&ipc_ida), based on
ida_alloc. req->handle from ksmbd_ipc_login_request and
FSCTL_PIPE_TRANSCEIVE ioctl can be same and it could lead to type confusion
between messages, resulting in access to unexpected parts of memory after
an incorrect delivery. ksmbd check type of ipc response but missing add
continue to check next ipc reponse.
Cc: stable@vger.kernel.org
Reported-by: Norbert Szetei <norbert@doyensec.com>
Tested-by: Norbert Szetei <norbert@doyensec.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Namjae Jeon <linkinjeon@kernel.org>
Date: Wed Feb 26 15:44:02 2025 +0900
ksmbd: fix use-after-free in smb2_lock
commit 84d2d1641b71dec326e8736a749b7ee76a9599fc upstream.
If smb_lock->zero_len has value, ->llist of smb_lock is not delete and
flock is old one. It will cause use-after-free on error handling
routine.
Cc: stable@vger.kernel.org
Reported-by: Norbert Szetei <norbert@doyensec.com>
Tested-by: Norbert Szetei <norbert@doyensec.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Sean Christopherson <seanjc@google.com>
Date: Thu Feb 27 14:24:06 2025 -0800
KVM: SVM: Drop DEBUGCTL[5:2] from guest's effective value
commit ee89e8013383d50a27ea9bf3c8a69eed6799856f upstream.
Drop bits 5:2 from the guest's effective DEBUGCTL value, as AMD changed
the architectural behavior of the bits and broke backwards compatibility.
On CPUs without BusLockTrap (or at least, in APMs from before ~2023),
bits 5:2 controlled the behavior of external pins:
Performance-Monitoring/Breakpoint Pin-Control (PBi)—Bits 5:2, read/write.
Software uses thesebits to control the type of information reported by
the four external performance-monitoring/breakpoint pins on the
processor. When a PBi bit is cleared to 0, the corresponding external pin
(BPi) reports performance-monitor information. When a PBi bit is set to
1, the corresponding external pin (BPi) reports breakpoint information.
With the introduction of BusLockTrap, presumably to be compatible with
Intel CPUs, AMD redefined bit 2 to be BLCKDB:
Bus Lock #DB Trap (BLCKDB)—Bit 2, read/write. Software sets this bit to
enable generation of a #DB trap following successful execution of a bus
lock when CPL is > 0.
and redefined bits 5:3 (and bit 6) as "6:3 Reserved MBZ".
Ideally, KVM would treat bits 5:2 as reserved. Defer that change to a
feature cleanup to avoid breaking existing guest in LTS kernels. For now,
drop the bits to retain backwards compatibility (of a sort).
Note, dropping bits 5:2 is still a guest-visible change, e.g. if the guest
is enabling LBRs *and* the legacy PBi bits, then the state of the PBi bits
is visible to the guest, whereas now the guest will always see '0'.
Reported-by: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: stable@vger.kernel.org
Reviewed-and-tested-by: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20250227222411.3490595-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Date: Thu Mar 13 12:53:26 2025 +0100
Linux 6.1.131
Link: https://lore.kernel.org/r/20250310170427.529761261@linuxfoundation.org
Tested-by: SeongJae Park <sj@kernel.org>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Mark Brown <broonie@kernel.org>
Tested-by: Pavel Machek (CIP) <pavel@denx.de>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Peter Schneider <pschneider1968@googlemail.com>
Tested-by: Hardik Garg <hargar@linux.microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Eric Dumazet <edumazet@google.com>
Date: Thu Feb 27 08:26:42 2025 +0000
llc: do not use skb_get() before dev_queue_xmit()
[ Upstream commit 64e6a754d33d31aa844b3ee66fb93ac84ca1565e ]
syzbot is able to crash hosts [1], using llc and devices
not supporting IFF_TX_SKB_SHARING.
In this case, e1000 driver calls eth_skb_pad(), while
the skb is shared.
Simply replace skb_get() by skb_clone() in net/llc/llc_s_ac.c
Note that e1000 driver might have an issue with pktgen,
because it does not clear IFF_TX_SKB_SHARING, this is an
orthogonal change.
We need to audit other skb_get() uses in net/llc.
[1]
kernel BUG at net/core/skbuff.c:2178 !
Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN NOPTI
CPU: 0 UID: 0 PID: 16371 Comm: syz.2.2764 Not tainted 6.14.0-rc4-syzkaller-00052-gac9c34d1e45a #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
RIP: 0010:pskb_expand_head+0x6ce/0x1240 net/core/skbuff.c:2178
Call Trace:
<TASK>
__skb_pad+0x18a/0x610 net/core/skbuff.c:2466
__skb_put_padto include/linux/skbuff.h:3843 [inline]
skb_put_padto include/linux/skbuff.h:3862 [inline]
eth_skb_pad include/linux/etherdevice.h:656 [inline]
e1000_xmit_frame+0x2d99/0x5800 drivers/net/ethernet/intel/e1000/e1000_main.c:3128
__netdev_start_xmit include/linux/netdevice.h:5151 [inline]
netdev_start_xmit include/linux/netdevice.h:5160 [inline]
xmit_one net/core/dev.c:3806 [inline]
dev_hard_start_xmit+0x9a/0x7b0 net/core/dev.c:3822
sch_direct_xmit+0x1ae/0xc30 net/sched/sch_generic.c:343
__dev_xmit_skb net/core/dev.c:4045 [inline]
__dev_queue_xmit+0x13d4/0x43e0 net/core/dev.c:4621
dev_queue_xmit include/linux/netdevice.h:3313 [inline]
llc_sap_action_send_test_c+0x268/0x320 net/llc/llc_s_ac.c:144
llc_exec_sap_trans_actions net/llc/llc_sap.c:153 [inline]
llc_sap_next_state net/llc/llc_sap.c:182 [inline]
llc_sap_state_process+0x239/0x510 net/llc/llc_sap.c:209
llc_ui_sendmsg+0xd0d/0x14e0 net/llc/af_llc.c:993
sock_sendmsg_nosec net/socket.c:718 [inline]
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot+da65c993ae113742a25f@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/67c020c0.050a0220.222324.0011.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Tiezhu Yang <yangtiezhu@loongson.cn>
Date: Sat Mar 8 13:50:45 2025 +0800
LoongArch: Convert unreachable() to BUG()
commit da64a2359092ceec4f9dea5b329d0aef20104217 upstream.
When compiling on LoongArch, there exists the following objtool warning
in arch/loongarch/kernel/machine_kexec.o:
kexec_reboot() falls through to next function crash_shutdown_secondary()
Avoid using unreachable() as it can (and will in the absence of UBSAN)
generate fall-through code. Use BUG() so we get a "break BRK_BUG" trap
(with unreachable annotation).
Cc: stable@vger.kernel.org # 6.12+
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Irui Wang <irui.wang@mediatek.com>
Date: Thu Mar 21 09:47:54 2024 +0800
media: mediatek: vcodec: Handle invalid decoder vsi
commit 59d438f8e02ca641c58d77e1feffa000ff809e9f upstream.
Handle an invalid decoder vsi in vpu_dec_init to ensure the decoder vsi
is valid for future use.
Fixes: 590577a4e525 ("[media] vcodec: mediatek: Add Mediatek V4L2 Video Decoder Driver")
Signed-off-by: Irui Wang <irui.wang@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[ Replace mtk_vdec_err with mtk_vcodec_err to make it work on 6.1.y ]
Signed-off-by: Alva Lan <alvalan9@foxmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Alexander Usyskin <alexander.usyskin@intel.com>
Date: Sun Feb 9 13:05:50 2025 +0200
mei: me: add panther lake P DID
commit a8e8ffcc3afce2ee5fb70162aeaef3f03573ee1e upstream.
Add Panther Lake P device id.
Cc: stable <stable@kernel.org>
Co-developed-by: Tomas Winkler <tomasw@gmail.com>
Signed-off-by: Tomas Winkler <tomasw@gmail.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://lore.kernel.org/r/20250209110550.1582982-1-alexander.usyskin@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Hao Zhang <zhanghao1@kylinos.cn>
Date: Thu Feb 27 11:41:29 2025 +0800
mm/page_alloc: fix uninitialized variable
commit 8fe9ed44dc29fba0786b7e956d2e87179e407582 upstream.
The variable "compact_result" is not initialized in function
__alloc_pages_slowpath(). It causes should_compact_retry() to use an
uninitialized value.
Initialize variable "compact_result" with the value COMPACT_SKIPPED.
BUG: KMSAN: uninit-value in __alloc_pages_slowpath+0xee8/0x16c0 mm/page_alloc.c:4416
__alloc_pages_slowpath+0xee8/0x16c0 mm/page_alloc.c:4416
__alloc_frozen_pages_noprof+0xa4c/0xe00 mm/page_alloc.c:4752
alloc_pages_mpol+0x4cd/0x890 mm/mempolicy.c:2270
alloc_frozen_pages_noprof mm/mempolicy.c:2341 [inline]
alloc_pages_noprof mm/mempolicy.c:2361 [inline]
folio_alloc_noprof+0x1dc/0x350 mm/mempolicy.c:2371
filemap_alloc_folio_noprof+0xa6/0x440 mm/filemap.c:1019
__filemap_get_folio+0xb9a/0x1840 mm/filemap.c:1970
grow_dev_folio fs/buffer.c:1039 [inline]
grow_buffers fs/buffer.c:1105 [inline]
__getblk_slow fs/buffer.c:1131 [inline]
bdev_getblk+0x2c9/0xab0 fs/buffer.c:1431
getblk_unmovable include/linux/buffer_head.h:369 [inline]
ext4_getblk+0x3b7/0xe50 fs/ext4/inode.c:864
ext4_bread_batch+0x9f/0x7d0 fs/ext4/inode.c:933
__ext4_find_entry+0x1ebb/0x36c0 fs/ext4/namei.c:1627
ext4_lookup_entry fs/ext4/namei.c:1729 [inline]
ext4_lookup+0x189/0xb40 fs/ext4/namei.c:1797
__lookup_slow+0x538/0x710 fs/namei.c:1793
lookup_slow+0x6a/0xd0 fs/namei.c:1810
walk_component fs/namei.c:2114 [inline]
link_path_walk+0xf29/0x1420 fs/namei.c:2479
path_openat+0x30f/0x6250 fs/namei.c:3985
do_filp_open+0x268/0x600 fs/namei.c:4016
do_sys_openat2+0x1bf/0x2f0 fs/open.c:1428
do_sys_open fs/open.c:1443 [inline]
__do_sys_openat fs/open.c:1459 [inline]
__se_sys_openat fs/open.c:1454 [inline]
__x64_sys_openat+0x2a1/0x310 fs/open.c:1454
x64_sys_call+0x36f5/0x3c30 arch/x86/include/generated/asm/syscalls_64.h:258
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Local variable compact_result created at:
__alloc_pages_slowpath+0x66/0x16c0 mm/page_alloc.c:4218
__alloc_frozen_pages_noprof+0xa4c/0xe00 mm/page_alloc.c:4752
Link: https://lkml.kernel.org/r/tencent_ED1032321D6510B145CDBA8CBA0093178E09@qq.com
Reported-by: syzbot+0cfd5e38e96a5596f2b6@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=0cfd5e38e96a5596f2b6
Signed-off-by: Hao Zhang <zhanghao1@kylinos.cn>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Ryan Roberts <ryan.roberts@arm.com>
Date: Wed Feb 26 12:16:09 2025 +0000
mm: don't skip arch_sync_kernel_mappings() in error paths
commit 3685024edd270f7c791f993157d65d3c928f3d6e upstream.
Fix callers that previously skipped calling arch_sync_kernel_mappings() if
an error occurred during a pgtable update. The call is still required to
sync any pgtable updates that may have occurred prior to hitting the error
condition.
These are theoretical bugs discovered during code review.
Link: https://lkml.kernel.org/r/20250226121610.2401743-1-ryan.roberts@arm.com
Fixes: 2ba3e6947aed ("mm/vmalloc: track which page-table levels were modified")
Fixes: 0c95cba49255 ("mm: apply_to_pte_range warn and fail if a large pte is encountered")
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christop Hellwig <hch@infradead.org>
Cc: "Uladzislau Rezki (Sony)" <urezki@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Krister Johansen <kjlx@templeofstupid.com>
Date: Mon Mar 3 18:10:13 2025 +0100
mptcp: fix 'scheduling while atomic' in mptcp_pm_nl_append_new_local_addr
commit 022bfe24aad8937705704ff2e414b100cf0f2e1a upstream.
If multiple connection requests attempt to create an implicit mptcp
endpoint in parallel, more than one caller may end up in
mptcp_pm_nl_append_new_local_addr because none found the address in
local_addr_list during their call to mptcp_pm_nl_get_local_id. In this
case, the concurrent new_local_addr calls may delete the address entry
created by the previous caller. These deletes use synchronize_rcu, but
this is not permitted in some of the contexts where this function may be
called. During packet recv, the caller may be in a rcu read critical
section and have preemption disabled.
An example stack:
BUG: scheduling while atomic: swapper/2/0/0x00000302
Call Trace:
<IRQ>
dump_stack_lvl (lib/dump_stack.c:117 (discriminator 1))
dump_stack (lib/dump_stack.c:124)
__schedule_bug (kernel/sched/core.c:5943)
schedule_debug.constprop.0 (arch/x86/include/asm/preempt.h:33 kernel/sched/core.c:5970)
__schedule (arch/x86/include/asm/jump_label.h:27 include/linux/jump_label.h:207 kernel/sched/features.h:29 kernel/sched/core.c:6621)
schedule (arch/x86/include/asm/preempt.h:84 kernel/sched/core.c:6804 kernel/sched/core.c:6818)
schedule_timeout (kernel/time/timer.c:2160)
wait_for_completion (kernel/sched/completion.c:96 kernel/sched/completion.c:116 kernel/sched/completion.c:127 kernel/sched/completion.c:148)
__wait_rcu_gp (include/linux/rcupdate.h:311 kernel/rcu/update.c:444)
synchronize_rcu (kernel/rcu/tree.c:3609)
mptcp_pm_nl_append_new_local_addr (net/mptcp/pm_netlink.c:966 net/mptcp/pm_netlink.c:1061)
mptcp_pm_nl_get_local_id (net/mptcp/pm_netlink.c:1164)
mptcp_pm_get_local_id (net/mptcp/pm.c:420)
subflow_check_req (net/mptcp/subflow.c:98 net/mptcp/subflow.c:213)
subflow_v4_route_req (net/mptcp/subflow.c:305)
tcp_conn_request (net/ipv4/tcp_input.c:7216)
subflow_v4_conn_request (net/mptcp/subflow.c:651)
tcp_rcv_state_process (net/ipv4/tcp_input.c:6709)
tcp_v4_do_rcv (net/ipv4/tcp_ipv4.c:1934)
tcp_v4_rcv (net/ipv4/tcp_ipv4.c:2334)
ip_protocol_deliver_rcu (net/ipv4/ip_input.c:205 (discriminator 1))
ip_local_deliver_finish (include/linux/rcupdate.h:813 net/ipv4/ip_input.c:234)
ip_local_deliver (include/linux/netfilter.h:314 include/linux/netfilter.h:308 net/ipv4/ip_input.c:254)
ip_sublist_rcv_finish (include/net/dst.h:461 net/ipv4/ip_input.c:580)
ip_sublist_rcv (net/ipv4/ip_input.c:640)
ip_list_rcv (net/ipv4/ip_input.c:675)
__netif_receive_skb_list_core (net/core/dev.c:5583 net/core/dev.c:5631)
netif_receive_skb_list_internal (net/core/dev.c:5685 net/core/dev.c:5774)
napi_complete_done (include/linux/list.h:37 include/net/gro.h:449 include/net/gro.h:444 net/core/dev.c:6114)
igb_poll (drivers/net/ethernet/intel/igb/igb_main.c:8244) igb
__napi_poll (net/core/dev.c:6582)
net_rx_action (net/core/dev.c:6653 net/core/dev.c:6787)
handle_softirqs (kernel/softirq.c:553)
__irq_exit_rcu (kernel/softirq.c:588 kernel/softirq.c:427 kernel/softirq.c:636)
irq_exit_rcu (kernel/softirq.c:651)
common_interrupt (arch/x86/kernel/irq.c:247 (discriminator 14))
</IRQ>
This problem seems particularly prevalent if the user advertises an
endpoint that has a different external vs internal address. In the case
where the external address is advertised and multiple connections
already exist, multiple subflow SYNs arrive in parallel which tends to
trigger the race during creation of the first local_addr_list entries
which have the internal address instead.
Fix by skipping the replacement of an existing implicit local address if
called via mptcp_pm_nl_get_local_id.
Fixes: d045b9eb95a9 ("mptcp: introduce implicit endpoints")
Cc: stable@vger.kernel.org
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Krister Johansen <kjlx@templeofstupid.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250303-net-mptcp-fix-sched-while-atomic-v1-1-f6a216c5a74c@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jason Xing <kerneljasonxing@gmail.com>
Date: Tue Mar 4 08:44:29 2025 +0800
net-timestamp: support TCP GSO case for a few missing flags
[ Upstream commit 3c9231ea6497dfc50ac0ef69fff484da27d0df66 ]
When I read through the TSO codes, I found out that we probably
miss initializing the tx_flags of last seg when TSO is turned
off, which means at the following points no more timestamp
(for this last one) will be generated. There are three flags
to be handled in this patch:
1. SKBTX_HW_TSTAMP
2. SKBTX_BPF
3. SKBTX_SCHED_TSTAMP
Note that SKBTX_BPF[1] was added in 6.14.0-rc2 by commit
6b98ec7e882af ("bpf: Add BPF_SOCK_OPS_TSTAMP_SCHED_CB callback")
and only belongs to net-next branch material for now. The common
issue of the above three flags can be fixed by this single patch.
This patch initializes the tx_flags to SKBTX_ANY_TSTAMP like what
the UDP GSO does to make the newly segmented last skb inherit the
tx_flags so that requested timestamp will be generated in each
certain layer, or else that last one has zero value of tx_flags
which leads to no timestamp at all.
Fixes: 4ed2d765dfacc ("net-timestamp: TCP timestamping")
Signed-off-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Antoine Tenart <atenart@kernel.org>
Date: Wed Feb 26 18:13:42 2025 +0100
net: gso: fix ownership in __udp_gso_segment
[ Upstream commit ee01b2f2d7d0010787c2343463965bbc283a497f ]
In __udp_gso_segment the skb destructor is removed before segmenting the
skb but the socket reference is kept as-is. This is an issue if the
original skb is later orphaned as we can hit the following bug:
kernel BUG at ./include/linux/skbuff.h:3312! (skb_orphan)
RIP: 0010:ip_rcv_core+0x8b2/0xca0
Call Trace:
ip_rcv+0xab/0x6e0
__netif_receive_skb_one_core+0x168/0x1b0
process_backlog+0x384/0x1100
__napi_poll.constprop.0+0xa1/0x370
net_rx_action+0x925/0xe50
The above can happen following a sequence of events when using
OpenVSwitch, when an OVS_ACTION_ATTR_USERSPACE action precedes an
OVS_ACTION_ATTR_OUTPUT action:
1. OVS_ACTION_ATTR_USERSPACE is handled (in do_execute_actions): the skb
goes through queue_gso_packets and then __udp_gso_segment, where its
destructor is removed.
2. The segments' data are copied and sent to userspace.
3. OVS_ACTION_ATTR_OUTPUT is handled (in do_execute_actions) and the
same original skb is sent to its path.
4. If it later hits skb_orphan, we hit the bug.
Fix this by also removing the reference to the socket in
__udp_gso_segment.
Fixes: ad405857b174 ("udp: better wmem accounting on gso")
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Link: https://patch.msgid.link/20250226171352.258045-1-atenart@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Peiyang Wang <wangpeiyang1@huawei.com>
Date: Fri Feb 28 18:52:58 2025 +0800
net: hns3: make sure ptp clock is unregister and freed if hclge_ptp_get_cycle returns an error
[ Upstream commit b7365eab39831487a84e63a9638209b68dc54008 ]
During the initialization of ptp, hclge_ptp_get_cycle might return an error
and returned directly without unregister clock and free it. To avoid that,
call hclge_ptp_destroy_clock to unregist and free clock if
hclge_ptp_get_cycle failed.
Fixes: 8373cd38a888 ("net: hns3: change the method of obtaining default ptp cycle")
Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250228105258.1243461-1-shaojijie@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Justin Iurman <justin.iurman@uliege.be>
Date: Tue Mar 4 19:10:39 2025 +0100
net: ipv6: fix dst ref loop in ila lwtunnel
[ Upstream commit 0e7633d7b95b67f1758aea19f8e85621c5f506a3 ]
This patch follows commit 92191dd10730 ("net: ipv6: fix dst ref loops in
rpl, seg6 and ioam6 lwtunnels") and, on a second thought, the same patch
is also needed for ila (even though the config that triggered the issue
was pathological, but still, we don't want that to happen).
Fixes: 79ff2fc31e0f ("ila: Cache a route to translated address")
Cc: Tom Herbert <tom@herbertland.com>
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Link: https://patch.msgid.link/20250304181039.35951-1-justin.iurman@uliege.be
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Justin Iurman <justin.iurman@uliege.be>
Date: Wed Mar 5 09:16:55 2025 +0100
net: ipv6: fix missing dst ref drop in ila lwtunnel
[ Upstream commit 5da15a9c11c1c47ef573e6805b60a7d8a1687a2a ]
Add missing skb_dst_drop() to drop reference to the old dst before
adding the new dst to the skb.
Fixes: 79ff2fc31e0f ("ila: Cache a route to translated address")
Cc: Tom Herbert <tom@herbertland.com>
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Link: https://patch.msgid.link/20250305081655.19032-1-justin.iurman@uliege.be
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Date: Mon Nov 27 23:30:21 2023 +0900
nilfs2: eliminate staggered calls to kunmap in nilfs_rename
commit 8cf57c6df818f58fdad16a909506be213623a88e upstream.
In nilfs_rename(), calls to nilfs_put_page() to release pages obtained
with nilfs_find_entry() or nilfs_dotdot() are alternated in the normal
path.
When replacing the kernel memory mapping method from kmap to
kmap_local_{page,folio}, this violates the constraint on the calling order
of kunmap_local().
Swap the order of nilfs_put_page calls where the kmap sections of multiple
pages overlap so that they are nested, allowing direct replacement of
nilfs_put_page() -> unmap_and_put_page().
Without this reordering, that replacement will cause a kernel WARNING in
kunmap_local_indexed() on architectures with high memory mapping.
Link: https://lkml.kernel.org/r/20231127143036.2425-3-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: ee70999a988b ("nilfs2: handle errors that nilfs_prepare_chunk() may return")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Date: Sat Jan 11 23:26:35 2025 +0900
nilfs2: handle errors that nilfs_prepare_chunk() may return
commit ee70999a988b8abc3490609142f50ebaa8344432 upstream.
Patch series "nilfs2: fix issues with rename operations".
This series fixes BUG_ON check failures reported by syzbot around rename
operations, and a minor behavioral issue where the mtime of a child
directory changes when it is renamed instead of moved.
This patch (of 2):
The directory manipulation routines nilfs_set_link() and
nilfs_delete_entry() rewrite the directory entry in the folio/page
previously read by nilfs_find_entry(), so error handling is omitted on the
assumption that nilfs_prepare_chunk(), which prepares the buffer for
rewriting, will always succeed for these. And if an error is returned, it
triggers the legacy BUG_ON() checks in each routine.
This assumption is wrong, as proven by syzbot: the buffer layer called by
nilfs_prepare_chunk() may call nilfs_get_block() if necessary, which may
fail due to metadata corruption or other reasons. This has been there all
along, but improved sanity checks and error handling may have made it more
reproducible in fuzzing tests.
Fix this issue by adding missing error paths in nilfs_set_link(),
nilfs_delete_entry(), and their caller nilfs_rename().
Link: https://lkml.kernel.org/r/20250111143518.7901-1-konishi.ryusuke@gmail.com
Link: https://lkml.kernel.org/r/20250111143518.7901-2-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+32c3706ebf5d95046ea1@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=32c3706ebf5d95046ea1
Reported-by: syzbot+1097e95f134f37d9395c@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=1097e95f134f37d9395c
Fixes: 2ba466d74ed7 ("nilfs2: directory entry operations")
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Date: Mon Nov 27 23:30:20 2023 +0900
nilfs2: move page release outside of nilfs_delete_entry and nilfs_set_link
commit 584db20c181f5e28c0386d7987406ace7fbd3e49 upstream.
Patch series "nilfs2: Folio conversions for directory paths".
This series applies page->folio conversions to nilfs2 directory
operations. This reduces hidden compound_head() calls and also converts
deprecated kmap calls to kmap_local in the directory code.
Although nilfs2 does not yet support large folios, Matthew has done his
best here to include support for large folios, which will be needed for
devices with large block sizes.
This series corresponds to the second half of the original post [1], but
with two complementary patches inserted at the beginning and some
adjustments, to prevent a kmap_local constraint violation found during
testing with highmem mapping.
[1] https://lkml.kernel.org/r/20231106173903.1734114-1-willy@infradead.org
I have reviewed all changes and tested this for regular and small block
sizes, both on machines with and without highmem mapping. No issues
found.
This patch (of 17):
In a few directory operations, the call to nilfs_put_page() for a page
obtained using nilfs_find_entry() or nilfs_dotdot() is hidden in
nilfs_set_link() and nilfs_delete_entry(), making it difficult to track
page release and preventing change of its call position.
By moving nilfs_put_page() out of these functions, this makes the page
get/put correspondence clearer and makes it easier to swap
nilfs_put_page() calls (and kunmap calls within them) when modifying
multiple directory entries simultaneously in nilfs_rename().
Also, update comments for nilfs_set_link() and nilfs_delete_entry() to
reflect changes in their behavior.
To make nilfs_put_page() visible from namei.c, this moves its definition
to nilfs.h and replaces existing equivalents to use it, but the exposure
of that definition is temporary and will be removed on a later kmap ->
kmap_local conversion.
Link: https://lkml.kernel.org/r/20231127143036.2425-1-konishi.ryusuke@gmail.com
Link: https://lkml.kernel.org/r/20231127143036.2425-2-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: ee70999a988b ("nilfs2: handle errors that nilfs_prepare_chunk() may return")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Meir Elisha <meir.elisha@volumez.com>
Date: Wed Feb 26 09:28:12 2025 +0200
nvmet-tcp: Fix a possible sporadic response drops in weakly ordered arch
[ Upstream commit a16f88964c647103dad7743a484b216d488a6352 ]
The order in which queue->cmd and rcv_state are updated is crucial.
If these assignments are reordered by the compiler, the worker might not
get queued in nvmet_tcp_queue_response(), hanging the IO. to enforce the
the correct reordering, set rcv_state using smp_store_release().
Fixes: bdaf13279192 ("nvmet-tcp: fix a segmentation fault during io parsing error")
Signed-off-by: Meir Elisha <meir.elisha@volumez.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Mingcong Bai <jeffbai@aosc.io>
Date: Sat Feb 22 00:48:24 2025 +0800
platform/x86: thinkpad_acpi: Add battery quirk for ThinkPad X131e
commit d0d10eaedcb53740883d7e5d53c5e15c879b48fb upstream.
Based on the dmesg messages from the original reporter:
[ 4.964073] ACPI: \_SB_.PCI0.LPCB.EC__.HKEY: BCTG evaluated but flagged as error
[ 4.964083] thinkpad_acpi: Error probing battery 2
Lenovo ThinkPad X131e also needs this battery quirk.
Reported-by: Fan Yang <804284660@qq.com>
Tested-by: Fan Yang <804284660@qq.com>
Co-developed-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Mingcong Bai <jeffbai@aosc.io>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250221164825.77315-1-jeffbai@aosc.io
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jiayuan Chen <jiayuan.chen@linux.dev>
Date: Fri Feb 28 22:14:08 2025 +0800
ppp: Fix KMSAN uninit-value warning with bpf
[ Upstream commit 4c2d14c40a68678d885eab4008a0129646805bae ]
Syzbot caught an "KMSAN: uninit-value" warning [1], which is caused by the
ppp driver not initializing a 2-byte header when using socket filter.
The following code can generate a PPP filter BPF program:
'''
struct bpf_program fp;
pcap_t *handle;
handle = pcap_open_dead(DLT_PPP_PPPD, 65535);
pcap_compile(handle, &fp, "ip and outbound", 0, 0);
bpf_dump(&fp, 1);
'''
Its output is:
'''
(000) ldh [2]
(001) jeq #0x21 jt 2 jf 5
(002) ldb [0]
(003) jeq #0x1 jt 4 jf 5
(004) ret #65535
(005) ret #0
'''
Wen can find similar code at the following link:
https://github.com/ppp-project/ppp/blob/master/pppd/options.c#L1680
The maintainer of this code repository is also the original maintainer
of the ppp driver.
As you can see the BPF program skips 2 bytes of data and then reads the
'Protocol' field to determine if it's an IP packet. Then it read the first
byte of the first 2 bytes to determine the direction.
The issue is that only the first byte indicating direction is initialized
in current ppp driver code while the second byte is not initialized.
For normal BPF programs generated by libpcap, uninitialized data won't be
used, so it's not a problem. However, for carefully crafted BPF programs,
such as those generated by syzkaller [2], which start reading from offset
0, the uninitialized data will be used and caught by KMSAN.
[1] https://syzkaller.appspot.com/bug?extid=853242d9c9917165d791
[2] https://syzkaller.appspot.com/text?tag=ReproC&x=11994913980000
Cc: Paul Mackerras <paulus@samba.org>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot+853242d9c9917165d791@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/bpf/000000000000dea025060d6bc3bc@google.com/
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250228141408.393864-1-jiayuan.chen@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Haoxiang Li <haoxiang_li2024@163.com>
Date: Thu Feb 27 12:11:31 2025 +0800
rapidio: add check for rio_add_net() in rio_scan_alloc_net()
commit e842f9a1edf306bf36fe2a4d847a0b0d458770de upstream.
The return value of rio_add_net() should be checked. If it fails,
put_device() should be called to free the memory and give up the reference
initialized in rio_add_net().
Link: https://lkml.kernel.org/r/20250227041131.3680761-1-haoxiang_li2024@163.com
Fixes: e6b585ca6e81 ("rapidio: move net allocation into core code")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Cc: Alexandre Bounine <alex.bou9@gmail.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Haoxiang Li <haoxiang_li2024@163.com>
Date: Thu Feb 27 15:34:09 2025 +0800
rapidio: fix an API misues when rio_add_net() fails
commit b2ef51c74b0171fde7eb69b6152d3d2f743ef269 upstream.
rio_add_net() calls device_register() and fails when device_register()
fails. Thus, put_device() should be used rather than kfree(). Add
"mport->net = NULL;" to avoid a use after free issue.
Link: https://lkml.kernel.org/r/20250227073409.3696854-1-haoxiang_li2024@163.com
Fixes: e8de370188d0 ("rapidio: add mport char device driver")
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Alexandre Bounine <alex.bou9@gmail.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Yang Yingliang <yangyingliang@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Christian Heusel <christian@heusel.eu>
Date: Mon Feb 24 09:32:59 2025 +0100
Revert "drivers/card_reader/rtsx_usb: Restore interrupt based detection"
commit 2397d61ee45cddb8f3bd3a3a9840ef0f0b5aa843 upstream.
This reverts commit 235b630eda072d7e7b102ab346d6b8a2c028a772.
This commit was found responsible for issues with SD card recognition,
as users had to re-insert their cards in the readers and wait for a
while. As for some people the SD card was involved in the boot process
it also caused boot failures.
Cc: stable@vger.kernel.org
Link: https://bbs.archlinux.org/viewtopic.php?id=303321
Fixes: 235b630eda07 ("drivers/card_reader/rtsx_usb: Restore interrupt based detection")
Reported-by: qf <quintafeira@tutanota.com>
Closes: https://lore.kernel.org/all/1de87dfa-1e81-45b7-8dcb-ad86c21d5352@heusel.eu
Signed-off-by: Christian Heusel <christian@heusel.eu>
Link: https://lore.kernel.org/r/20250224-revert-sdcard-patch-v1-1-d1a457fbb796@heusel.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Date: Mon Mar 10 16:47:34 2025 +0100
Revert "KVM: e500: always restore irqs"
This reverts commit bce6adebc9c5c4d49ea6b4fcaa56ec590b9516a6 which is
commit 87ecfdbc699cc95fac73291b52650283ddcf929d upstream.
It should not have been applied.
Link: https://lore.kernel.org/r/CABgObfb5U9zwTQBPkPB=mKu-vMrRspPCm4wfxoQpB+SyAnb5WQ@mail.gmail.com
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Date: Mon Mar 10 16:52:25 2025 +0100
Revert "KVM: PPC: e500: Mark "struct page" dirty in kvmppc_e500_shadow_map()"
This reverts commit 8b92e9cc04e71afb2be09f78af1de5492a0af4a4 which is
commit c9be85dabb376299504e0d391d15662c0edf8273 upstream.
It should not have been applied.
Link: https://lore.kernel.org/r/CABgObfb5U9zwTQBPkPB=mKu-vMrRspPCm4wfxoQpB+SyAnb5WQ@mail.gmail.com
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Date: Mon Mar 10 16:52:03 2025 +0100
Revert "KVM: PPC: e500: Mark "struct page" pfn accessed before dropping mmu_lock"
This reverts commit d2004572fc3014cae43a0d6374ffabbbab1644d4 which is
commit 84cf78dcd9d65c45ab73998d4ad50f433d53fb93 upstream.
It should not have been applied.
Link: https://lore.kernel.org/r/CABgObfb5U9zwTQBPkPB=mKu-vMrRspPCm4wfxoQpB+SyAnb5WQ@mail.gmail.com
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Date: Mon Mar 10 16:51:47 2025 +0100
Revert "KVM: PPC: e500: Use __kvm_faultin_pfn() to handle page faults"
This reverts commit deead14da7478b40a18cc439064c9c1a933e1b4b which is
commit 419cfb983ca93e75e905794521afefcfa07988bb upstream.
It should not have been applied.
Link: https://lore.kernel.org/r/CABgObfb5U9zwTQBPkPB=mKu-vMrRspPCm4wfxoQpB+SyAnb5WQ@mail.gmail.com
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Rob Herring (Arm) <robh@kernel.org>
Date: Wed Feb 26 13:38:19 2025 -0600
Revert "of: reserved-memory: Fix using wrong number of cells to get property 'alignment'"
commit 75f1f311d883dfaffb98be3c1da208d6ed5d4df9 upstream.
This reverts commit 267b21d0bef8e67dbe6c591c9991444e58237ec9.
Turns out some DTs do depend on this behavior. Specifically, a
downstream Pixel 6 DT. Revert the change at least until we can decide if
the DT spec can be changed instead.
Cc: stable@vger.kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Heiko Carstens <hca@linux.ibm.com>
Date: Tue Feb 25 10:53:10 2025 +0100
s390/traps: Fix test_monitor_call() inline assembly
commit 5623bc23a1cb9f9a9470fa73b3a20321dc4c4870 upstream.
The test_monitor_call() inline assembly uses the xgr instruction, which
also modifies the condition code, to clear a register. However the clobber
list of the inline assembly does not specify that the condition code is
modified, which may lead to incorrect code generation.
Use the lhi instruction instead to clear the register without that the
condition code is modified. Furthermore this limits clearing to the lower
32 bits of val, since its type is int.
Fixes: 17248ea03674 ("s390: fix __EMIT_BUG() macro")
Cc: stable@vger.kernel.org
Reviewed-by: Juergen Christ <jchrist@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Zecheng Li <zecheng@google.com>
Date: Tue Mar 4 21:40:31 2025 +0000
sched/fair: Fix potential memory corruption in child_cfs_rq_on_list
[ Upstream commit 3b4035ddbfc8e4521f85569998a7569668cccf51 ]
child_cfs_rq_on_list attempts to convert a 'prev' pointer to a cfs_rq.
This 'prev' pointer can originate from struct rq's leaf_cfs_rq_list,
making the conversion invalid and potentially leading to memory
corruption. Depending on the relative positions of leaf_cfs_rq_list and
the task group (tg) pointer within the struct, this can cause a memory
fault or access garbage data.
The issue arises in list_add_leaf_cfs_rq, where both
cfs_rq->leaf_cfs_rq_list and rq->leaf_cfs_rq_list are added to the same
leaf list. Also, rq->tmp_alone_branch can be set to rq->leaf_cfs_rq_list.
This adds a check `if (prev == &rq->leaf_cfs_rq_list)` after the main
conditional in child_cfs_rq_on_list. This ensures that the container_of
operation will convert a correct cfs_rq struct.
This check is sufficient because only cfs_rqs on the same CPU are added
to the list, so verifying the 'prev' pointer against the current rq's list
head is enough.
Fixes a potential memory corruption issue that due to current struct
layout might not be manifesting as a crash but could lead to unpredictable
behavior when the layout changes.
Fixes: fdaba61ef8a2 ("sched/fair: Ensure that the CFS parent is added after unthrottling")
Signed-off-by: Zecheng Li <zecheng@google.com>
Reviewed-and-tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20250304214031.2882646-1-zecheng@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Tuo Li <islituo@gmail.com>
Date: Fri Jun 30 10:47:48 2023 +0800
scsi: lpfc: Fix a possible data race in lpfc_unregister_fcf_rescan()
commit 0e881c0a4b6146b7e856735226208f48251facd8 upstream.
The variable phba->fcf.fcf_flag is often protected by the lock
phba->hbalock() when is accessed. Here is an example in
lpfc_unregister_fcf_rescan():
spin_lock_irq(&phba->hbalock);
phba->fcf.fcf_flag |= FCF_INIT_DISC;
spin_unlock_irq(&phba->hbalock);
However, in the same function, phba->fcf.fcf_flag is assigned with 0
without holding the lock, and thus can cause a data race:
phba->fcf.fcf_flag = 0;
To fix this possible data race, a lock and unlock pair is added when
accessing the variable phba->fcf.fcf_flag.
Reported-by: BassCheck <bass@buaa.edu.cn>
Signed-off-by: Tuo Li <islituo@gmail.com>
Link: https://lore.kernel.org/r/20230630024748.1035993-1-islituo@gmail.com
Reviewed-by: Justin Tee <justin.tee@broadcom.com>
Reviewed-by: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Wenshan Lan <jetlan9@163.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Visweswara Tanuku <quic_vtanuku@quicinc.com>
Date: Fri Jan 24 04:57:40 2025 -0800
slimbus: messaging: Free transaction ID in delayed interrupt scenario
commit dcb0d43ba8eb9517e70b1a0e4b0ae0ab657a0e5a upstream.
In case of interrupt delay for any reason, slim_do_transfer()
returns timeout error but the transaction ID (TID) is not freed.
This results into invalid memory access inside
qcom_slim_ngd_rx_msgq_cb() due to invalid TID.
Fix the issue by freeing the TID in slim_do_transfer() before
returning timeout error to avoid invalid memory access.
Call trace:
__memcpy_fromio+0x20/0x190
qcom_slim_ngd_rx_msgq_cb+0x130/0x290 [slim_qcom_ngd_ctrl]
vchan_complete+0x2a0/0x4a0
tasklet_action_common+0x274/0x700
tasklet_action+0x28/0x3c
_stext+0x188/0x620
run_ksoftirqd+0x34/0x74
smpboot_thread_fn+0x1d8/0x464
kthread+0x178/0x238
ret_from_fork+0x10/0x20
Code: aa0003e8 91000429 f100044a 3940002b (3800150b)
---[ end trace 0fe00bec2b975c99 ]---
Kernel panic - not syncing: Oops: Fatal exception in interrupt.
Fixes: afbdcc7c384b ("slimbus: Add messaging APIs to slimbus framework")
Cc: stable <stable@kernel.org>
Signed-off-by: Visweswara Tanuku <quic_vtanuku@quicinc.com>
Link: https://lore.kernel.org/r/20250124125740.16897-1-quic_vtanuku@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Ralf Schlatterbeck <rsc@runtux.com>
Date: Fri Feb 2 12:53:30 2024 +0100
spi-mxs: Fix chipselect glitch
commit 269e31aecdd0b70f53a05def79480f15cbcc0fd6 upstream.
There was a change in the mxs-dma engine that uses a new custom flag.
The change was not applied to the mxs spi driver.
This results in chipselect being deasserted too early.
This fixes the chipselect problem by using the new flag in the mxs-spi
driver.
Fixes: ceeeb99cd821 ("dmaengine: mxs: rename custom flag")
Signed-off-by: Ralf Schlatterbeck <rsc@runtux.com>
Link: https://msgid.link/r/20240202115330.wxkbfmvd76sy3a6a@runtux.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: Stefan Wahren <wahrenst@gmx.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Uday Shankar <ushankar@purestorage.com>
Date: Tue Mar 4 14:34:26 2025 -0700
ublk: set_params: properly check if parameters can be applied
[ Upstream commit 5ac60242b0173be83709603ebaf27a473f16c4e4 ]
The parameters set by the set_params call are only applied to the block
device in the start_dev call. So if a device has already been started, a
subsequently issued set_params on that device will not have the desired
effect, and should return an error. There is an existing check for this
- set_params fails on devices in the LIVE state. But this check is not
sufficient to cover the recovery case. In this case, the device will be
in the QUIESCED or FAIL_IO states, so set_params will succeed. But this
success is misleading, because the parameters will not be applied, since
the device has already been started (by a previous ublk server). The bit
UB_STATE_USED is set on completion of the start_dev; use it to detect
and fail set_params commands which arrive too late to be applied (after
start_dev).
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Fixes: 0aa73170eba5 ("ublk_drv: add SET_PARAMS/GET_PARAMS control command")
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250304-set_params-v1-1-17b5e0887606@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jiri Olsa <jolsa@kernel.org>
Date: Thu Jan 9 15:14:40 2025 +0100
uprobes: Fix race in uprobe_free_utask
commit b583ef82b671c9a752fbe3e95bd4c1c51eab764d upstream.
Max Makarov reported kernel panic [1] in perf user callchain code.
The reason for that is the race between uprobe_free_utask and bpf
profiler code doing the perf user stack unwind and is triggered
within uprobe_free_utask function:
- after current->utask is freed and
- before current->utask is set to NULL
general protection fault, probably for non-canonical address 0x9e759c37ee555c76: 0000 [#1] SMP PTI
RIP: 0010:is_uprobe_at_func_entry+0x28/0x80
...
? die_addr+0x36/0x90
? exc_general_protection+0x217/0x420
? asm_exc_general_protection+0x26/0x30
? is_uprobe_at_func_entry+0x28/0x80
perf_callchain_user+0x20a/0x360
get_perf_callchain+0x147/0x1d0
bpf_get_stackid+0x60/0x90
bpf_prog_9aac297fb833e2f5_do_perf_event+0x434/0x53b
? __smp_call_single_queue+0xad/0x120
bpf_overflow_handler+0x75/0x110
...
asm_sysvec_apic_timer_interrupt+0x1a/0x20
RIP: 0010:__kmem_cache_free+0x1cb/0x350
...
? uprobe_free_utask+0x62/0x80
? acct_collect+0x4c/0x220
uprobe_free_utask+0x62/0x80
mm_release+0x12/0xb0
do_exit+0x26b/0xaa0
__x64_sys_exit+0x1b/0x20
do_syscall_64+0x5a/0x80
It can be easily reproduced by running following commands in
separate terminals:
# while :; do bpftrace -e 'uprobe:/bin/ls:_start { printf("hit\n"); }' -c ls; done
# bpftrace -e 'profile:hz:100000 { @[ustack()] = count(); }'
Fixing this by making sure current->utask pointer is set to NULL
before we start to release the utask object.
[1] https://github.com/grafana/pyroscope/issues/3673
Fixes: cfa7f3d2c526 ("perf,x86: avoid missing caller address in stack traces captured in uprobe")
Reported-by: Max Makarov <maxpain@linux.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20250109141440.2692173-1-jolsa@kernel.org
[Christian Simon: Rebased for 6.12.y, due to mainline change https://lore.kernel.org/all/20240929144239.GA9475@redhat.com/]
Signed-off-by: Christian Simon <simon@swine.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Date: Thu Feb 13 15:22:57 2025 +0300
usb: atm: cxacru: fix a flaw in existing endpoint checks
commit c90aad369899a607cfbc002bebeafd51e31900cd upstream.
Syzbot once again identified a flaw in usb endpoint checking, see [1].
This time the issue stems from a commit authored by me (2eabb655a968
("usb: atm: cxacru: fix endpoint checking in cxacru_bind()")).
While using usb_find_common_endpoints() may usually be enough to
discard devices with wrong endpoints, in this case one needs more
than just finding and identifying the sufficient number of endpoints
of correct types - one needs to check the endpoint's address as well.
Since cxacru_bind() fills URBs with CXACRU_EP_CMD address in mind,
switch the endpoint verification approach to usb_check_XXX_endpoints()
instead to fix incomplete ep testing.
[1] Syzbot report:
usb 5-1: BOGUS urb xfer, pipe 3 != type 1
WARNING: CPU: 0 PID: 1378 at drivers/usb/core/urb.c:504 usb_submit_urb+0xc4e/0x18c0 drivers/usb/core/urb.c:503
...
RIP: 0010:usb_submit_urb+0xc4e/0x18c0 drivers/usb/core/urb.c:503
...
Call Trace:
<TASK>
cxacru_cm+0x3c8/0xe50 drivers/usb/atm/cxacru.c:649
cxacru_card_status drivers/usb/atm/cxacru.c:760 [inline]
cxacru_bind+0xcf9/0x1150 drivers/usb/atm/cxacru.c:1223
usbatm_usb_probe+0x314/0x1d30 drivers/usb/atm/usbatm.c:1058
cxacru_usb_probe+0x184/0x220 drivers/usb/atm/cxacru.c:1377
usb_probe_interface+0x641/0xbb0 drivers/usb/core/driver.c:396
really_probe+0x2b9/0xad0 drivers/base/dd.c:658
__driver_probe_device+0x1a2/0x390 drivers/base/dd.c:800
driver_probe_device+0x50/0x430 drivers/base/dd.c:830
...
Reported-and-tested-by: syzbot+ccbbc229a024fa3e13b5@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=ccbbc229a024fa3e13b5
Fixes: 2eabb655a968 ("usb: atm: cxacru: fix endpoint checking in cxacru_bind()")
Cc: stable@kernel.org
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Link: https://lore.kernel.org/r/20250213122259.730772-1-n.zhandarovich@fintech.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Badhri Jagan Sridharan <badhri@google.com>
Date: Sun Feb 16 22:30:02 2025 +0000
usb: dwc3: gadget: Prevent irq storm when TH re-executes
commit 69c58deec19628c8a686030102176484eb94fed4 upstream.
While commit d325a1de49d6 ("usb: dwc3: gadget: Prevent losing events in
event cache") makes sure that top half(TH) does not end up overwriting the
cached events before processing them when the TH gets invoked more than one
time, returning IRQ_HANDLED results in occasional irq storm where the TH
hogs the CPU. The irq storm can be prevented by the flag before event
handler busy is cleared. Default enable interrupt moderation in all
versions which support them.
ftrace event stub during dwc3 irq storm:
irq/504_dwc3-1111 ( 1111) [000] .... 70.000866: irq_handler_exit: irq=14 ret=handled
irq/504_dwc3-1111 ( 1111) [000] .... 70.000872: irq_handler_entry: irq=504 name=dwc3
irq/504_dwc3-1111 ( 1111) [000] .... 70.000874: irq_handler_exit: irq=504 ret=handled
irq/504_dwc3-1111 ( 1111) [000] .... 70.000881: irq_handler_entry: irq=504 name=dwc3
irq/504_dwc3-1111 ( 1111) [000] .... 70.000883: irq_handler_exit: irq=504 ret=handled
irq/504_dwc3-1111 ( 1111) [000] .... 70.000889: irq_handler_entry: irq=504 name=dwc3
irq/504_dwc3-1111 ( 1111) [000] .... 70.000892: irq_handler_exit: irq=504 ret=handled
irq/504_dwc3-1111 ( 1111) [000] .... 70.000898: irq_handler_entry: irq=504 name=dwc3
irq/504_dwc3-1111 ( 1111) [000] .... 70.000901: irq_handler_exit: irq=504 ret=handled
irq/504_dwc3-1111 ( 1111) [000] .... 70.000907: irq_handler_entry: irq=504 name=dwc3
irq/504_dwc3-1111 ( 1111) [000] .... 70.000909: irq_handler_exit: irq=504 ret=handled
irq/504_dwc3-1111 ( 1111) [000] .... 70.000915: irq_handler_entry: irq=504 name=dwc3
irq/504_dwc3-1111 ( 1111) [000] .... 70.000918: irq_handler_exit: irq=504 ret=handled
irq/504_dwc3-1111 ( 1111) [000] .... 70.000924: irq_handler_entry: irq=504 name=dwc3
irq/504_dwc3-1111 ( 1111) [000] .... 70.000927: irq_handler_exit: irq=504 ret=handled
irq/504_dwc3-1111 ( 1111) [000] .... 70.000933: irq_handler_entry: irq=504 name=dwc3
irq/504_dwc3-1111 ( 1111) [000] .... 70.000935: irq_handler_exit: irq=504 ret=handled
....
Cc: stable <stable@kernel.org>
Suggested-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Fixes: d325a1de49d6 ("usb: dwc3: gadget: Prevent losing events in event cache")
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20250216223003.3568039-1-badhri@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Date: Thu Jan 30 23:49:31 2025 +0000
usb: dwc3: Set SUSPENDENABLE soon after phy init
commit cc5bfc4e16fc1d1c520cd7bb28646e82b6e69217 upstream.
After phy initialization, some phy operations can only be executed while
in lower P states. Ensure GUSB3PIPECTL.SUSPENDENABLE and
GUSB2PHYCFG.SUSPHY are set soon after initialization to avoid blocking
phy ops.
Previously the SUSPENDENABLE bits are only set after the controller
initialization, which may not happen right away if there's no gadget
driver or xhci driver bound. Revise this to clear SUSPENDENABLE bits
only when there's mode switching (change in GCTL.PRTCAPDIR).
Fixes: 6d735722063a ("usb: dwc3: core: Prevent phy suspend during init")
Cc: stable <stable@kernel.org>
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/633aef0afee7d56d2316f7cc3e1b2a6d518a8cc9.1738280911.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Prashanth K <prashanth.k@oss.qualcomm.com>
Date: Mon Feb 24 14:26:04 2025 +0530
usb: gadget: Check bmAttributes only if configuration is valid
commit 8e812e9355a6f14dffd54a33d951ca403b9732f5 upstream.
If the USB configuration is not valid, then avoid checking for
bmAttributes to prevent null pointer deference.
Cc: stable <stable@kernel.org>
Fixes: 40e89ff5750f ("usb: gadget: Set self-powered based on MaxPower and bmAttributes")
Signed-off-by: Prashanth K <prashanth.k@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250224085604.417327-1-prashanth.k@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Marek Szyprowski <m.szyprowski@samsung.com>
Date: Thu Feb 20 13:03:14 2025 +0100
usb: gadget: Fix setting self-powered state on suspend
commit c783e1258f29c5caac9eea0aea6b172870f1baf8 upstream.
cdev->config might be NULL, so check it before dereferencing.
CC: stable <stable@kernel.org>
Fixes: 40e89ff5750f ("usb: gadget: Set self-powered based on MaxPower and bmAttributes")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20250220120314.3614330-1-m.szyprowski@samsung.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Prashanth K <prashanth.k@oss.qualcomm.com>
Date: Mon Feb 17 17:33:28 2025 +0530
usb: gadget: Set self-powered based on MaxPower and bmAttributes
commit 40e89ff5750fca2c1d6da93f98a2038716bba86c upstream.
Currently the USB gadget will be set as bus-powered based solely
on whether its bMaxPower is greater than 100mA, but this may miss
devices that may legitimately draw less than 100mA but still want
to report as bus-powered. Similarly during suspend & resume, USB
gadget is incorrectly marked as bus/self powered without checking
the bmAttributes field. Fix these by configuring the USB gadget
as self or bus powered based on bmAttributes, and explicitly set
it as bus-powered if it draws more than 100mA.
Cc: stable <stable@kernel.org>
Fixes: 5e5caf4fa8d3 ("usb: gadget: composite: Inform controller driver of self-powered")
Signed-off-by: Prashanth K <prashanth.k@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250217120328.2446639-1-prashanth.k@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Pawel Laszczak <pawell@cadence.com>
Date: Fri Feb 28 07:50:25 2025 +0000
usb: hub: lack of clearing xHC resources
commit 2b66ef84d0d2a0ea955b40bd306f5e3abbc5cf9c upstream.
The xHC resources allocated for USB devices are not released in correct
order after resuming in case when while suspend device was reconnected.
This issue has been detected during the fallowing scenario:
- connect hub HS to root port
- connect LS/FS device to hub port
- wait for enumeration to finish
- force host to suspend
- reconnect hub attached to root port
- wake host
For this scenario during enumeration of USB LS/FS device the Cadence xHC
reports completion error code for xHC commands because the xHC resources
used for devices has not been properly released.
XHCI specification doesn't mention that device can be reset in any order
so, we should not treat this issue as Cadence xHC controller bug.
Similar as during disconnecting in this case the device resources should
be cleared starting form the last usb device in tree toward the root hub.
To fix this issue usbcore driver should call hcd->driver->reset_device
for all USB devices connected to hub which was reconnected while
suspending.
Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/PH7PR07MB953841E38C088678ACDCF6EEDDCC2@PH7PR07MB9538.namprd07.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Miao Li <limiao@kylinos.cn>
Date: Tue Mar 4 15:07:57 2025 +0800
usb: quirks: Add DELAY_INIT and NO_LPM for Prolific Mass Storage Card Reader
commit ff712188daa3fe3ce7e11e530b4dca3826dae14a upstream.
When used on Huawei hisi platforms, Prolific Mass Storage Card Reader
which the VID:PID is in 067b:2731 might fail to enumerate at boot time
and doesn't work well with LPM enabled, combination quirks:
USB_QUIRK_DELAY_INIT + USB_QUIRK_NO_LPM
fixed the problems.
Signed-off-by: Miao Li <limiao@kylinos.cn>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20250304070757.139473-1-limiao870622@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Date: Tue Feb 25 13:02:46 2025 +0200
usb: renesas_usbhs: Call clk_put()
commit b5ea08aa883da05106fcc683d12489a4292d1122 upstream.
Clocks acquired with of_clk_get() need to be freed with clk_put(). Call
clk_put() on priv->clks[0] on error path.
Fixes: 3df0e240caba ("usb: renesas_usbhs: Add multiple clocks management")
Cc: stable <stable@kernel.org>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://lore.kernel.org/r/20250225110248.870417-2-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Date: Tue Feb 25 13:02:48 2025 +0200
usb: renesas_usbhs: Flush the notify_hotplug_work
commit 552ca6b87e3778f3dd5b87842f95138162e16c82 upstream.
When performing continuous unbind/bind operations on the USB drivers
available on the Renesas RZ/G2L SoC, a kernel crash with the message
"Unable to handle kernel NULL pointer dereference at virtual address"
may occur. This issue points to the usbhsc_notify_hotplug() function.
Flush the delayed work to avoid its execution when driver resources are
unavailable.
Fixes: bc57381e6347 ("usb: renesas_usbhs: use delayed_work instead of work_struct")
Cc: stable <stable@kernel.org>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://lore.kernel.org/r/20250225110248.870417-4-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Date: Tue Feb 25 13:02:47 2025 +0200
usb: renesas_usbhs: Use devm_usb_get_phy()
commit e0c92440938930e7fa7aa6362780d39cdea34449 upstream.
The gpriv->transceiver is retrieved in probe() through usb_get_phy() but
never released. Use devm_usb_get_phy() to handle this scenario.
This issue was identified through code investigation. No issue was found
without this change.
Fixes: b5a2875605ca ("usb: renesas_usbhs: Allow an OTG PHY driver to provide VBUS")
Cc: stable <stable@kernel.org>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://lore.kernel.org/r/20250225110248.870417-3-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Date: Wed Feb 19 12:47:00 2025 +0100
usb: typec: tcpci_rt1711h: Unmask alert interrupts to fix functionality
commit d6b82dafd17db0658f089b9cdec573982ca82bc5 upstream.
During probe, the TCPC alert interrupts are getting masked to
avoid unwanted interrupts during chip setup: this is ok to do
but there is no unmasking happening at any later time, which
means that the chip will not raise any interrupt, essentially
making it not functional as, while internally it does perform
all of the intended functions, it won't signal anything to the
outside.
Unmask the alert interrupts to fix functionality.
Fixes: ce08eaeb6388 ("staging: typec: rt1711h typec chip driver")
Cc: stable <stable@kernel.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250219114700.41700-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Fedor Pchelkin <boddah8794@gmail.com>
Date: Mon Feb 17 13:54:40 2025 +0300
usb: typec: ucsi: increase timeout for PPM reset operations
commit bf4f9ae1cb08ccaafbe6874be6c46f59b83ae778 upstream.
It is observed that on some systems an initial PPM reset during the boot
phase can trigger a timeout:
[ 6.482546] ucsi_acpi USBC000:00: failed to reset PPM!
[ 6.482551] ucsi_acpi USBC000:00: error -ETIMEDOUT: PPM init failed
Still, increasing the timeout value, albeit being the most straightforward
solution, eliminates the problem: the initial PPM reset may take up to
~8000-10000ms on some Lenovo laptops. When it is reset after the above
period of time (or even if ucsi_reset_ppm() is not called overall), UCSI
works as expected.
Moreover, if the ucsi_acpi module is loaded/unloaded manually after the
system has booted, reading the CCI values and resetting the PPM works
perfectly, without any timeout. Thus it's only a boot-time issue.
The reason for this behavior is not clear but it may be the consequence
of some tricks that the firmware performs or be an actual firmware bug.
As a workaround, increase the timeout to avoid failing the UCSI
initialization prematurely.
Fixes: b1b59e16075f ("usb: typec: ucsi: Increase command completion timeout value")
Cc: stable <stable@kernel.org>
Signed-off-by: Fedor Pchelkin <boddah8794@gmail.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20250217105442.113486-3-boddah8794@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Michal Pecio <michal.pecio@gmail.com>
Date: Tue Feb 25 11:59:27 2025 +0200
usb: xhci: Enable the TRB overfetch quirk on VIA VL805
commit c133ec0e5717868c9967fa3df92a55e537b1aead upstream.
Raspberry Pi is a major user of those chips and they discovered a bug -
when the end of a transfer ring segment is reached, up to four TRBs can
be prefetched from the next page even if the segment ends with link TRB
and on page boundary (the chip claims to support standard 4KB pages).
It also appears that if the prefetched TRBs belong to a different ring
whose doorbell is later rung, they may be used without refreshing from
system RAM and the endpoint will stay idle if their cycle bit is stale.
Other users complain about IOMMU faults on x86 systems, unsurprisingly.
Deal with it by using existing quirk which allocates a dummy page after
each transfer ring segment. This was seen to resolve both problems. RPi
came up with a more efficient solution, shortening each segment by four
TRBs, but it complicated the driver and they ditched it for this quirk.
Also rename the quirk and add VL805 device ID macro.
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Link: https://github.com/raspberrypi/linux/issues/4685
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=215906
CC: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250225095927.2512358-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Oscar Maes <oscmaes92@gmail.com>
Date: Mon Mar 3 16:56:19 2025 +0100
vlan: enforce underlying device type
[ Upstream commit b33a534610067ade2bdaf2052900aaad99701353 ]
Currently, VLAN devices can be created on top of non-ethernet devices.
Besides the fact that it doesn't make much sense, this also causes a
bug which leaks the address of a kernel function to usermode.
When creating a VLAN device, we initialize GARP (garp_init_applicant)
and MRP (mrp_init_applicant) for the underlying device.
As part of the initialization process, we add the multicast address of
each applicant to the underlying device, by calling dev_mc_add.
__dev_mc_add uses dev->addr_len to determine the length of the new
multicast address.
This causes an out-of-bounds read if dev->addr_len is greater than 6,
since the multicast addresses provided by GARP and MRP are only 6
bytes long.
This behaviour can be reproduced using the following commands:
ip tunnel add gretest mode ip6gre local ::1 remote ::2 dev lo
ip l set up dev gretest
ip link add link gretest name vlantest type vlan id 100
Then, the following command will display the address of garp_pdu_rcv:
ip maddr show | grep 01:80:c2:00:00:21
Fix the bug by enforcing the type of the underlying device during VLAN
device initialization.
Fixes: 22bedad3ce11 ("net: convert multicast list to list_head")
Reported-by: syzbot+91161fe81857b396c8a0@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/000000000000ca9a81061a01ec20@google.com/
Signed-off-by: Oscar Maes <oscmaes92@gmail.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20250303155619.8918-1-oscmaes92@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Michal Luczaj <mhal@rbox.co>
Date: Tue Jan 28 14:15:27 2025 +0100
vsock: Keep the binding until socket destruction
commit fcdd2242c0231032fc84e1404315c245ae56322a upstream.
Preserve sockets bindings; this includes both resulting from an explicit
bind() and those implicitly bound through autobind during connect().
Prevents socket unbinding during a transport reassignment, which fixes a
use-after-free:
1. vsock_create() (refcnt=1) calls vsock_insert_unbound() (refcnt=2)
2. transport->release() calls vsock_remove_bound() without checking if
sk was bound and moved to bound list (refcnt=1)
3. vsock_bind() assumes sk is in unbound list and before
__vsock_insert_bound(vsock_bound_sockets()) calls
__vsock_remove_bound() which does:
list_del_init(&vsk->bound_table); // nop
sock_put(&vsk->sk); // refcnt=0
BUG: KASAN: slab-use-after-free in __vsock_bind+0x62e/0x730
Read of size 4 at addr ffff88816b46a74c by task a.out/2057
dump_stack_lvl+0x68/0x90
print_report+0x174/0x4f6
kasan_report+0xb9/0x190
__vsock_bind+0x62e/0x730
vsock_bind+0x97/0xe0
__sys_bind+0x154/0x1f0
__x64_sys_bind+0x6e/0xb0
do_syscall_64+0x93/0x1b0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Allocated by task 2057:
kasan_save_stack+0x1e/0x40
kasan_save_track+0x10/0x30
__kasan_slab_alloc+0x85/0x90
kmem_cache_alloc_noprof+0x131/0x450
sk_prot_alloc+0x5b/0x220
sk_alloc+0x2c/0x870
__vsock_create.constprop.0+0x2e/0xb60
vsock_create+0xe4/0x420
__sock_create+0x241/0x650
__sys_socket+0xf2/0x1a0
__x64_sys_socket+0x6e/0xb0
do_syscall_64+0x93/0x1b0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Freed by task 2057:
kasan_save_stack+0x1e/0x40
kasan_save_track+0x10/0x30
kasan_save_free_info+0x37/0x60
__kasan_slab_free+0x4b/0x70
kmem_cache_free+0x1a1/0x590
__sk_destruct+0x388/0x5a0
__vsock_bind+0x5e1/0x730
vsock_bind+0x97/0xe0
__sys_bind+0x154/0x1f0
__x64_sys_bind+0x6e/0xb0
do_syscall_64+0x93/0x1b0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
refcount_t: addition on 0; use-after-free.
WARNING: CPU: 7 PID: 2057 at lib/refcount.c:25 refcount_warn_saturate+0xce/0x150
RIP: 0010:refcount_warn_saturate+0xce/0x150
__vsock_bind+0x66d/0x730
vsock_bind+0x97/0xe0
__sys_bind+0x154/0x1f0
__x64_sys_bind+0x6e/0xb0
do_syscall_64+0x93/0x1b0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
refcount_t: underflow; use-after-free.
WARNING: CPU: 7 PID: 2057 at lib/refcount.c:28 refcount_warn_saturate+0xee/0x150
RIP: 0010:refcount_warn_saturate+0xee/0x150
vsock_remove_bound+0x187/0x1e0
__vsock_release+0x383/0x4a0
vsock_release+0x90/0x120
__sock_release+0xa3/0x250
sock_close+0x14/0x20
__fput+0x359/0xa80
task_work_run+0x107/0x1d0
do_exit+0x847/0x2560
do_group_exit+0xb8/0x250
__x64_sys_exit_group+0x3a/0x50
x64_sys_call+0xfec/0x14f0
do_syscall_64+0x93/0x1b0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Fixes: c0cfa2d8a788 ("vsock: add multi-transports support")
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Link: https://patch.msgid.link/20250128-vsock-transport-vs-autobind-v3-1-1cf57065b770@rbox.co
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Luigi Leonardi <leonardi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Michal Luczaj <mhal@rbox.co>
Date: Mon Feb 10 13:15:00 2025 +0100
vsock: Orphan socket after transport release
commit 78dafe1cf3afa02ed71084b350713b07e72a18fb upstream.
During socket release, sock_orphan() is called without considering that it
sets sk->sk_wq to NULL. Later, if SO_LINGER is enabled, this leads to a
null pointer dereferenced in virtio_transport_wait_close().
Orphan the socket only after transport release.
Partially reverts the 'Fixes:' commit.
KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f]
lock_acquire+0x19e/0x500
_raw_spin_lock_irqsave+0x47/0x70
add_wait_queue+0x46/0x230
virtio_transport_release+0x4e7/0x7f0
__vsock_release+0xfd/0x490
vsock_release+0x90/0x120
__sock_release+0xa3/0x250
sock_close+0x14/0x20
__fput+0x35e/0xa90
__x64_sys_close+0x78/0xd0
do_syscall_64+0x93/0x1b0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Reported-by: syzbot+9d55b199192a4be7d02c@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=9d55b199192a4be7d02c
Fixes: fcdd2242c023 ("vsock: Keep the binding until socket destruction")
Tested-by: Luigi Leonardi <leonardi@redhat.com>
Reviewed-by: Luigi Leonardi <leonardi@redhat.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Link: https://patch.msgid.link/20250210-vsock-linger-nullderef-v3-1-ef6244d02b54@rbox.co
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Luigi Leonardi <leonardi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Date: Fri Feb 28 16:46:57 2025 +0300
wifi: cfg80211: regulatory: improve invalid hints checking
commit 59b348be7597c4a9903cb003c69e37df20c04a30 upstream.
Syzbot keeps reporting an issue [1] that occurs when erroneous symbols
sent from userspace get through into user_alpha2[] via
regulatory_hint_user() call. Such invalid regulatory hints should be
rejected.
While a sanity check from commit 47caf685a685 ("cfg80211: regulatory:
reject invalid hints") looks to be enough to deter these very cases,
there is a way to get around it due to 2 reasons.
1) The way isalpha() works, symbols other than latin lower and
upper letters may be used to determine a country/domain.
For instance, greek letters will also be considered upper/lower
letters and for such characters isalpha() will return true as well.
However, ISO-3166-1 alpha2 codes should only hold latin
characters.
2) While processing a user regulatory request, between
reg_process_hint_user() and regulatory_hint_user() there happens to
be a call to queue_regulatory_request() which modifies letters in
request->alpha2[] with toupper(). This works fine for latin symbols,
less so for weird letter characters from the second part of _ctype[].
Syzbot triggers a warning in is_user_regdom_saved() by first sending
over an unexpected non-latin letter that gets malformed by toupper()
into a character that ends up failing isalpha() check.
Prevent this by enhancing is_an_alpha2() to ensure that incoming
symbols are latin letters and nothing else.
[1] Syzbot report:
------------[ cut here ]------------
Unexpected user alpha2: A�
WARNING: CPU: 1 PID: 964 at net/wireless/reg.c:442 is_user_regdom_saved net/wireless/reg.c:440 [inline]
WARNING: CPU: 1 PID: 964 at net/wireless/reg.c:442 restore_alpha2 net/wireless/reg.c:3424 [inline]
WARNING: CPU: 1 PID: 964 at net/wireless/reg.c:442 restore_regulatory_settings+0x3c0/0x1e50 net/wireless/reg.c:3516
Modules linked in:
CPU: 1 UID: 0 PID: 964 Comm: kworker/1:2 Not tainted 6.12.0-rc5-syzkaller-00044-gc1e939a21eb1 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
Workqueue: events_power_efficient crda_timeout_work
RIP: 0010:is_user_regdom_saved net/wireless/reg.c:440 [inline]
RIP: 0010:restore_alpha2 net/wireless/reg.c:3424 [inline]
RIP: 0010:restore_regulatory_settings+0x3c0/0x1e50 net/wireless/reg.c:3516
...
Call Trace:
<TASK>
crda_timeout_work+0x27/0x50 net/wireless/reg.c:542
process_one_work kernel/workqueue.c:3229 [inline]
process_scheduled_works+0xa65/0x1850 kernel/workqueue.c:3310
worker_thread+0x870/0xd30 kernel/workqueue.c:3391
kthread+0x2f2/0x390 kernel/kthread.c:389
ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
</TASK>
Reported-by: syzbot+e10709ac3c44f3d4e800@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=e10709ac3c44f3d4e800
Fixes: 09d989d179d0 ("cfg80211: add regulatory hint disconnect support")
Cc: stable@kernel.org
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Link: https://patch.msgid.link/20250228134659.1577656-1-n.zhandarovich@fintech.ru
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Johannes Berg <johannes.berg@intel.com>
Date: Sun Feb 9 14:34:51 2025 +0200
wifi: iwlwifi: limit printed string from FW file
[ Upstream commit e0dc2c1bef722cbf16ae557690861e5f91208129 ]
There's no guarantee here that the file is always with a
NUL-termination, so reading the string may read beyond the
end of the TLV. If that's the last TLV in the file, it can
perhaps even read beyond the end of the file buffer.
Fix that by limiting the print format to the size of the
buffer we have.
Fixes: aee1b6385e29 ("iwlwifi: support fseq tlv and print fseq version")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250209143303.cb5f9d0c2f5d.Idec695d53c6c2234aade306f7647b576c7e3d928@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Vitaliy Shevtsov <v.shevtsov@mt-integration.ru>
Date: Fri Jan 31 20:26:55 2025 +0500
wifi: nl80211: reject cooked mode if it is set along with other flags
commit 49f27f29446a5bfe633dd2cc0cfebd48a1a5e77f upstream.
It is possible to set both MONITOR_FLAG_COOK_FRAMES and MONITOR_FLAG_ACTIVE
flags simultaneously on the same monitor interface from the userspace. This
causes a sub-interface to be created with no IEEE80211_SDATA_IN_DRIVER bit
set because the monitor interface is in the cooked state and it takes
precedence over all other states. When the interface is then being deleted
the kernel calls WARN_ONCE() from check_sdata_in_driver() because of missing
that bit.
Fix this by rejecting MONITOR_FLAG_COOK_FRAMES if it is set along with
other flags.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: 66f7ac50ed7c ("nl80211: Add monitor interface configuration flags")
Cc: stable@vger.kernel.org
Reported-by: syzbot+2e5c1e55b9e5c28a3da7@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=2e5c1e55b9e5c28a3da7
Signed-off-by: Vitaliy Shevtsov <v.shevtsov@mt-integration.ru>
Link: https://patch.msgid.link/20250131152657.5606-1-v.shevtsov@mt-integration.ru
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Andrew Cooper <andrew.cooper3@citrix.com>
Date: Fri Mar 7 00:28:46 2025 +0000
x86/amd_nb: Use rdmsr_safe() in amd_get_mmconfig_range()
commit 14cb5d83068ecf15d2da6f7d0e9ea9edbcbc0457 upstream.
Xen doesn't offer MSR_FAM10H_MMIO_CONF_BASE to all guests. This results
in the following warning:
unchecked MSR access error: RDMSR from 0xc0010058 at rIP: 0xffffffff8101d19f (xen_do_read_msr+0x7f/0xa0)
Call Trace:
xen_read_msr+0x1e/0x30
amd_get_mmconfig_range+0x2b/0x80
quirk_amd_mmconfig_area+0x28/0x100
pnp_fixup_device+0x39/0x50
__pnp_add_device+0xf/0x150
pnp_add_device+0x3d/0x100
pnpacpi_add_device_handler+0x1f9/0x280
acpi_ns_get_device_callback+0x104/0x1c0
acpi_ns_walk_namespace+0x1d0/0x260
acpi_get_devices+0x8a/0xb0
pnpacpi_init+0x50/0x80
do_one_initcall+0x46/0x2e0
kernel_init_freeable+0x1da/0x2f0
kernel_init+0x16/0x1b0
ret_from_fork+0x30/0x50
ret_from_fork_asm+0x1b/0x30
based on quirks for a "PNP0c01" device. Treating MMCFG as disabled is the
right course of action, so no change is needed there.
This was most likely exposed by fixing the Xen MSR accessors to not be
silently-safe.
Fixes: 3fac3734c43a ("xen/pv: support selecting safe/unsafe msr accesses")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250307002846.3026685-1-andrew.cooper3@citrix.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Ahmed S. Darwish <darwi@linutronix.de>
Date: Tue Mar 4 09:51:12 2025 +0100
x86/cacheinfo: Validate CPUID leaf 0x2 EDX output
commit 8177c6bedb7013cf736137da586cf783922309dd upstream.
CPUID leaf 0x2 emits one-byte descriptors in its four output registers
EAX, EBX, ECX, and EDX. For these descriptors to be valid, the most
significant bit (MSB) of each register must be clear.
The historical Git commit:
019361a20f016 ("- pre6: Intel: start to add Pentium IV specific stuff (128-byte cacheline etc)...")
introduced leaf 0x2 output parsing. It only validated the MSBs of EAX,
EBX, and ECX, but left EDX unchecked.
Validate EDX's most-significant bit.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250304085152.51092-2-darwi@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Ahmed S. Darwish <darwi@linutronix.de>
Date: Tue Mar 4 09:51:14 2025 +0100
x86/cpu: Properly parse CPUID leaf 0x2 TLB descriptor 0x63
commit f6bdaab79ee4228a143ee1b4cb80416d6ffc0c63 upstream.
CPUID leaf 0x2's one-byte TLB descriptors report the number of entries
for specific TLB types, among other properties.
Typically, each emitted descriptor implies the same number of entries
for its respective TLB type(s). An emitted 0x63 descriptor is an
exception: it implies 4 data TLB entries for 1GB pages and 32 data TLB
entries for 2MB or 4MB pages.
For the TLB descriptors parsing code, the entry count for 1GB pages is
encoded at the intel_tlb_table[] mapping, but the 2MB/4MB entry count is
totally ignored.
Update leaf 0x2's parsing logic 0x2 to account for 32 data TLB entries
for 2MB/4MB pages implied by the 0x63 descriptor.
Fixes: e0ba94f14f74 ("x86/tlb_info: get last level TLB entry number of CPU")
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: stable@kernel.org
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250304085152.51092-4-darwi@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Ahmed S. Darwish <darwi@linutronix.de>
Date: Tue Mar 4 09:51:13 2025 +0100
x86/cpu: Validate CPUID leaf 0x2 EDX output
commit 1881148215c67151b146450fb89ec22fd92337a7 upstream.
CPUID leaf 0x2 emits one-byte descriptors in its four output registers
EAX, EBX, ECX, and EDX. For these descriptors to be valid, the most
significant bit (MSB) of each register must be clear.
Leaf 0x2 parsing at intel.c only validated the MSBs of EAX, EBX, and
ECX, but left EDX unchecked.
Validate EDX's most-significant bit as well.
Fixes: e0ba94f14f74 ("x86/tlb_info: get last level TLB entry number of CPU")
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: stable@kernel.org
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250304085152.51092-3-darwi@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Xi Ruoyao <xry111@xry111.site>
Date: Wed May 22 10:06:24 2024 +0800
x86/mm: Don't disable PCID when INVLPG has been fixed by microcode
commit f24f669d03f884a6ef95cca84317d0f329e93961 upstream.
Per the "Processor Specification Update" documentations referred by
the intel-microcode-20240312 release note, this microcode release has
fixed the issue for all affected models.
So don't disable PCID if the microcode is new enough. The precise
minimum microcode revision fixing the issue was provided by Pawan
Intel.
[ dhansen: comment and changelog tweaks ]
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Link: https://lore.kernel.org/all/168436059559.404.13934972543631851306.tip-bot2@tip-bot2/
Link: https://github.com/intel/Intel-Linux-Processor-Microcode-Data-Files/releases/tag/microcode-20240312
Link: https://cdrdv2.intel.com/v1/dl/getContent/740518 # RPL042, rev. 13
Link: https://cdrdv2.intel.com/v1/dl/getContent/682436 # ADL063, rev. 24
Link: https://lore.kernel.org/all/20240325231300.qrltbzf6twm43ftb@desk/
Link: https://lore.kernel.org/all/20240522020625.69418-1-xry111%40xry111.site
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jarkko Sakkinen <jarkko@kernel.org>
Date: Wed Mar 5 07:00:05 2025 +0200
x86/sgx: Fix size overflows in sgx_encl_create()
[ Upstream commit 0d3e0dfd68fb9e6b0ec865be9f3377cc3ff55733 ]
The total size calculated for EPC can overflow u64 given the added up page
for SECS. Further, the total size calculated for shmem can overflow even
when the EPC size stays within limits of u64, given that it adds the extra
space for 128 byte PCMD structures (one for each page).
Address this by pre-evaluating the micro-architectural requirement of
SGX: the address space size must be power of two. This is eventually
checked up by ECREATE but the pre-check has the additional benefit of
making sure that there is some space for additional data.
Fixes: 888d24911787 ("x86/sgx: Add SGX_IOC_ENCLAVE_CREATE")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Dave Hansen <dave.hansen@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: https://lore.kernel.org/r/20250305050006.43896-1-jarkko@kernel.org
Closes: https://lore.kernel.org/linux-sgx/c87e01a0-e7dd-4749-a348-0980d3444f04@stanley.mountain/
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Waiman Long <longman@redhat.com>
Date: Thu Jul 27 14:45:57 2023 -0400
x86/speculation: Add __update_spec_ctrl() helper
[ Upstream commit e3e3bab1844d448a239cd57ebf618839e26b4157 ]
Add a new __update_spec_ctrl() helper which is a variant of
update_spec_ctrl() that can be used in a noinstr function.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20230727184600.26768-2-longman@redhat.com
Stable-dep-of: c157d351460b ("intel_idle: Handle older CPUs, which stop the TSC in deeper C states, correctly")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Date: Wed Nov 6 12:14:48 2024 +0200
xhci: pci: Fix indentation in the PCI device ID definitions
commit 0309ed83791c079f239c13e0c605210425cd1a61 upstream.
Some of the definitions are missing the one TAB, add it to them.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20241106101459.775897-23-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>