Author: Quentin Schulz <quentin.schulz@cherry.de>
Date: Wed Jul 31 13:05:28 2024 +0200
arm64: dts: rockchip: fix eMMC/SPI corruption when audio has been used on RK3399 Puma
commit bb94a157b37ec23f53906a279320f6ed64300eba upstream.
In commit 91419ae0420f ("arm64: dts: rockchip: use BCLK to GPIO switch
on rk3399"), an additional pinctrl state was added whose default pinmux
is for 8ch i2s0. However, Puma only has 2ch i2s0. It's been overriding
the pinctrl-0 property but the second property override was missed in
the aforementioned commit.
On Puma, a hardware slider called "BIOS Disable/Normal Boot" can disable
eMMC and SPI to force booting from SD card. Another software-controlled
GPIO is then configured to override this behavior to make eMMC and SPI
available without human intervention. This is currently done in U-Boot
and it was enough until the aforementioned commit.
Indeed, because of this additional not-yet-overridden property, this
software-controlled GPIO is now muxed in a state that does not override
this hardware slider anymore, rendering SPI and eMMC flashes unusable.
Let's override the property with the 2ch pinmux to fix this.
Fixes: 91419ae0420f ("arm64: dts: rockchip: use BCLK to GPIO switch on rk3399")
Cc: stable@vger.kernel.org
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Link: https://lore.kernel.org/r/20240731-puma-emmc-6-v1-1-4e28eadf32d0@cherry.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: FUKAUMI Naoki <naoki@radxa.com>
Date: Mon Jul 22 18:52:16 2024 +0900
arm64: dts: rockchip: fix PMIC interrupt pin in pinctrl for ROCK Pi E
[ Upstream commit c623e9daf60a0275d623ce054601550e54987f5b ]
use GPIO0_A2 as PMIC interrupt pin in pinctrl.
(I forgot to fix this part in previous commit.)
Fixes: 02afd3d5b9fa ("arm64: dts: rockchip: fix PMIC interrupt pin on ROCK Pi E")
Signed-off-by: FUKAUMI Naoki <naoki@radxa.com>
Link: https://lore.kernel.org/r/20240722095216.1656081-1-naoki@radxa.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Quentin Schulz <quentin.schulz@cherry.de>
Date: Wed Jul 31 13:05:29 2024 +0200
arm64: dts: rockchip: override BIOS_DISABLE signal via GPIO hog on RK3399 Puma
commit 741f5ba7ccba5d7ae796dd11c320e28045524771 upstream.
The Qseven BIOS_DISABLE signal on the RK3399-Q7 keeps the on-module eMMC
and SPI flash powered-down initially (in fact it keeps the reset signal
asserted). BIOS_DISABLE_OVERRIDE pin allows to override that signal so
that eMMC and SPI can be used regardless of the state of the signal.
Let's make this GPIO a hog so that it's reserved and locked in the
proper state.
At the same time, make sure the pin is reserved for the hog and cannot
be requested by another node.
Cc: stable@vger.kernel.org
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Link: https://lore.kernel.org/r/20240731-puma-emmc-6-v1-2-4e28eadf32d0@cherry.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Arseniy Krasnov <avkrasnov@salutedevices.com>
Date: Wed Sep 11 17:24:25 2024 +0300
ASoC: meson: axg-card: fix 'use-after-free'
commit 4f9a71435953f941969a4f017e2357db62d85a86 upstream.
Buffer 'card->dai_link' is reallocated in 'meson_card_reallocate_links()',
so move 'pad' pointer initialization after this function when memory is
already reallocated.
Kasan bug report:
==================================================================
BUG: KASAN: slab-use-after-free in axg_card_add_link+0x76c/0x9bc
Read of size 8 at addr ffff000000e8b260 by task modprobe/356
CPU: 0 PID: 356 Comm: modprobe Tainted: G O 6.9.12-sdkernel #1
Call trace:
dump_backtrace+0x94/0xec
show_stack+0x18/0x24
dump_stack_lvl+0x78/0x90
print_report+0xfc/0x5c0
kasan_report+0xb8/0xfc
__asan_load8+0x9c/0xb8
axg_card_add_link+0x76c/0x9bc [snd_soc_meson_axg_sound_card]
meson_card_probe+0x344/0x3b8 [snd_soc_meson_card_utils]
platform_probe+0x8c/0xf4
really_probe+0x110/0x39c
__driver_probe_device+0xb8/0x18c
driver_probe_device+0x108/0x1d8
__driver_attach+0xd0/0x25c
bus_for_each_dev+0xe0/0x154
driver_attach+0x34/0x44
bus_add_driver+0x134/0x294
driver_register+0xa8/0x1e8
__platform_driver_register+0x44/0x54
axg_card_pdrv_init+0x20/0x1000 [snd_soc_meson_axg_sound_card]
do_one_initcall+0xdc/0x25c
do_init_module+0x10c/0x334
load_module+0x24c4/0x26cc
init_module_from_file+0xd4/0x128
__arm64_sys_finit_module+0x1f4/0x41c
invoke_syscall+0x60/0x188
el0_svc_common.constprop.0+0x78/0x13c
do_el0_svc+0x30/0x40
el0_svc+0x38/0x78
el0t_64_sync_handler+0x100/0x12c
el0t_64_sync+0x190/0x194
Fixes: 7864a79f37b5 ("ASoC: meson: add axg sound card support")
Cc: Stable@vger.kernel.org
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://patch.msgid.link/20240911142425.598631-1-avkrasnov@salutedevices.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jeff Layton <jlayton@kernel.org>
Date: Mon Aug 12 12:30:52 2024 -0400
btrfs: update target inode's ctime on unlink
[ Upstream commit 3bc2ac2f8f0b78a13140fc72022771efe0c9b778 ]
Unlink changes the link count on the target inode. POSIX mandates that
the ctime must also change when this occurs.
According to https://pubs.opengroup.org/onlinepubs/9699919799/functions/unlink.html:
"Upon successful completion, unlink() shall mark for update the last data
modification and last file status change timestamps of the parent
directory. Also, if the file's link count is not 0, the last file status
change timestamp of the file shall be marked for update."
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add link to the opengroup docs ]
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: peng guo <engguopeng@buaa.edu.cn>
Date: Wed Jul 10 10:31:12 2024 +0800
cxl/core: Fix incorrect vendor debug UUID define
[ Upstream commit 8ecef8e01a08c7e3e4ffc8f08d9f9663984f334b ]
When user send a mbox command whose opcode is CXL_MBOX_OP_CLEAR_LOG and
the in_payload is normal vendor debug log UUID according to
the CXL specification cxl_payload_from_user_allowed() will return
false unexpectedly, Sending mbox cmd operation fails and the kernel
log will print:
Clear Log: input payload not allowed.
All CXL devices that support a debug log shall support the Vendor Debug
Log to allow the log to be accessed through a common host driver, for any
device, all versions of the CXL specification define the same value with
Log Identifier of: 5e1819d9-11a9-400c-811f-d60719403d86
Refer to CXL spec r3.1 Table 8-71
Fix the definition value of DEFINE_CXL_VENDOR_DEBUG_UUID to match the
CXL specification.
Fixes: 472b1ce6e9d6 ("cxl/mem: Enable commands via CEL")
Signed-off-by: peng guo <engguopeng@buaa.edu.cn>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://patch.msgid.link/20240710023112.8063-1-engguopeng@buaa.edu.cn
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Mikulas Patocka <mpatocka@redhat.com>
Date: Thu Sep 5 20:27:25 2024 +0200
dm-integrity: fix a race condition when accessing recalc_sector
commit f8e1ca92e35e9041cc0a1bc226ef07a853a22de4 upstream.
There's a race condition when accessing the variable
ic->sb->recalc_sector. The function integrity_recalc writes to this
variable when it makes some progress and the function
dm_integrity_map_continue may read this variable concurrently.
One problem is that on 32-bit architectures the 64-bit variable is not
read and written atomically - it may be possible to read garbage if read
races with write.
Another problem is that memory accesses to this variable are not guarded
with memory barriers.
This commit fixes the race - it moves reading ic->sb->recalc_sector to an
earlier place where we hold &ic->endio_wait.lock.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: T.J. Mercier <tjmercier@google.com>
Date: Fri Aug 30 19:26:26 2024 +0000
dma-buf: heaps: Fix off-by-one in CMA heap fault handler
commit ea5ff5d351b520524019f7ff7f9ce418de2dad87 upstream.
Until VM_DONTEXPAND was added in commit 1c1914d6e8c6 ("dma-buf: heaps:
Don't track CMA dma-buf pages under RssFile") it was possible to obtain
a mapping larger than the buffer size via mremap and bypass the overflow
check in dma_buf_mmap_internal. When using such a mapping to attempt to
fault past the end of the buffer, the CMA heap fault handler also checks
the fault offset against the buffer size, but gets the boundary wrong by
1. Fix the boundary check so that we don't read off the end of the pages
array and insert an arbitrary page in the mapping.
Reported-by: Xingyu Jin <xingyuj@google.com>
Fixes: a5d2d29e24be ("dma-buf: heaps: Move heap-helper logic into the cma_heap implementation")
Cc: stable@vger.kernel.org # Applicable >= 5.10. Needs adjustments only for 5.10.
Signed-off-by: T.J. Mercier <tjmercier@google.com>
Acked-by: John Stultz <jstultz@google.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240830192627.2546033-1-tjmercier@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Alex Deucher <alexander.deucher@amd.com>
Date: Fri Sep 6 10:42:45 2024 -0400
drm/amdgpu/atomfirmware: Silence UBSAN warning
commit 17ea4383649fdeaff3181ddcf1ff03350d42e591 upstream.
Per the comments, these are variable sized arrays.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3613
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 81f7804ba84ee617ed594de934ed87bcc4f83531)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Date: Thu Jul 25 08:59:25 2024 -0700
drm/i915/guc: prevent a possible int overflow in wq offsets
[ Upstream commit d3d37f74683e2f16f2635ee265884f7ca69350ae ]
It may be possible for the sum of the values derived from
i915_ggtt_offset() and __get_parent_scratch_offset()/
i915_ggtt_offset() to go over the u32 limit before being assigned
to wq offsets of u64 type.
Mitigate these issues by expanding one of the right operands
to u64 to avoid any overflow issues just in case.
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
Fixes: c2aa552ff09d ("drm/i915/guc: Add multi-lrc context registration")
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Link: https://patchwork.freedesktop.org/patch/msgid/20240725155925.14707-1-n.zhandarovich@fintech.ru
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 1f1c1bd56620b80ae407c5790743e17caad69cec)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Rob Clark <robdclark@chromium.org>
Date: Tue Jul 16 09:06:30 2024 -0700
drm/msm/adreno: Fix error return if missing firmware-name
[ Upstream commit 624ab9cde26a9f150b4fd268b0f3dae3184dc40c ]
-ENODEV is used to signify that there is no zap shader for the platform,
and the CPU can directly take the GPU out of secure mode. We want to
use this return code when there is no zap-shader node. But not when
there is, but without a firmware-name property. This case we want to
treat as-if the needed fw is not found.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/604564/
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Bouke Sybren Haarsma <boukehaarsma23@gmail.com>
Date: Sun Jul 28 14:47:31 2024 +0200
drm: panel-orientation-quirks: Add quirk for Ayn Loki Max
[ Upstream commit 2c71c8459c8ca66bd8f597effaac892ee8448a9f ]
Add quirk orientation for Ayn Loki Max model.
This has been tested by JELOS team that uses their
own patched kernel for a while now and confirmed by
users in the ChimeraOS discord servers.
Signed-off-by: Bouke Sybren Haarsma <boukehaarsma23@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240728124731.168452-3-boukehaarsma23@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Bouke Sybren Haarsma <boukehaarsma23@gmail.com>
Date: Sun Jul 28 14:47:30 2024 +0200
drm: panel-orientation-quirks: Add quirk for Ayn Loki Zero
[ Upstream commit b86aa4140f6a8f01f35bfb05af60e01a55b48803 ]
Add quirk orientation for the Ayn Loki Zero.
This also has been tested/used by the JELOS team.
Signed-off-by: Bouke Sybren Haarsma <boukehaarsma23@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240728124731.168452-2-boukehaarsma23@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Date: Wed May 8 21:46:55 2024 +0300
eeprom: digsy_mtc: Fix 93xx46 driver probe failure
[ Upstream commit 2b82641ad0620b2d71dc05024b20f82db7e1c0b6 ]
The update to support other (bigger) types of EEPROMs broke
the driver loading due to removal of the default size.
Fix this by adding the respective (new) flag to the platform data.
Fixes: 14374fbb3f06 ("misc: eeprom_93xx46: Add new 93c56 and 93c66 compatible strings")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240508184905.2102633-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Muhammad Usama Anjum <usama.anjum@collabora.com>
Date: Fri Sep 6 15:28:39 2024 +0500
fou: fix initialization of grc
[ Upstream commit 4c8002277167125078e6b9b90137bdf443ebaa08 ]
The grc must be initialize first. There can be a condition where if
fou is NULL, goto out will be executed and grc would be used
uninitialized.
Fixes: 7e4196935069 ("fou: Fix null-ptr-deref in GRO.")
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20240906102839.202798-1-usama.anjum@collabora.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Date: Tue Jan 16 10:32:20 2024 +0300
fs/ntfs3: Use kvfree to free memory allocated by kvmalloc
commit ddb17dc880eeaac37b5a6e984de07b882de7d78d upstream.
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Dmitry Savin <envelsavinds@gmail.com>
Date: Tue Jul 16 23:27:57 2024 +0100
HID: multitouch: Add support for GT7868Q
[ Upstream commit c8000deb68365b461b324d68c7ea89d730f0bb85 ]
GT7868Q has incorrect data in the report and needs a fixup.
The change enables haptic touchpad on Lenovo ThinkBook 13x Gen 4
and has been tested on the device.
Signed-off-by: Dmitry Savin <envelsavinds@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Patryk Biel <pbiel7@gmail.com>
Date: Mon Sep 9 11:30:28 2024 +0200
hwmon: (pmbus) Conditionally clear individual status bits for pmbus rev >= 1.2
[ Upstream commit 20471071f198c8626dbe3951ac9834055b387844 ]
The current implementation of pmbus_show_boolean assumes that all devices
support write-back operation of status register to clear pending warnings
or faults. Since clearing individual bits in the status registers was only
introduced in PMBus specification 1.2, this operation may not be supported
by some older devices. This can result in an error while reading boolean
attributes such as temp1_max_alarm.
Fetch PMBus revision supported by the device and modify pmbus_show_boolean
so that it only tries to clear individual status bits if the device is
compliant with PMBus specs >= 1.2. Otherwise clear all fault indicators
on the current page after a fault status was reported.
Fixes: 35f165f08950a ("hwmon: (pmbus) Clear pmbus fault/warning bits after read")
Signed-off-by: Patryk Biel <pbiel7@gmail.com>
Message-ID: <20240909-pmbus-status-reg-clearing-v1-1-f1c0d68c6408@gmail.com>
[groeck:
Rewrote description
Moved revision detection code ahead of clear faults command
Assigned revision if return value from PMBUS_REVISION command is 0
Improved return value check from calling _pmbus_write_byte_data()]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jacob Keller <jacob.e.keller@intel.com>
Date: Wed Jul 31 09:55:55 2024 -0700
ice: fix accounting for filters shared by multiple VSIs
[ Upstream commit e843cf7b34fe2e0c1afc55e1f3057375c9b77a14 ]
When adding a switch filter (such as a MAC or VLAN filter), it is expected
that the driver will detect the case where the filter already exists, and
return -EEXIST. This is used by calling code such as ice_vc_add_mac_addr,
and ice_vsi_add_vlan to avoid incrementing the accounting fields such as
vsi->num_vlan or vf->num_mac.
This logic works correctly for the case where only a single VSI has added a
given switch filter.
When a second VSI adds the same switch filter, the driver converts the
existing filter from an ICE_FWD_TO_VSI filter into an ICE_FWD_TO_VSI_LIST
filter. This saves switch resources, by ensuring that multiple VSIs can
re-use the same filter.
The ice_add_update_vsi_list() function is responsible for doing this
conversion. When first converting a filter from the FWD_TO_VSI into
FWD_TO_VSI_LIST, it checks if the VSI being added is the same as the
existing rule's VSI. In such a case it returns -EEXIST.
However, when the switch rule has already been converted to a
FWD_TO_VSI_LIST, the logic is different. Adding a new VSI in this case just
requires extending the VSI list entry. The logic for checking if the rule
already exists in this case returns 0 instead of -EEXIST.
This breaks the accounting logic mentioned above, so the counters for how
many MAC and VLAN filters exist for a given VF or VSI no longer accurately
reflect the actual count. This breaks other code which relies on these
counts.
In typical usage this primarily affects such filters generally shared by
multiple VSIs such as VLAN 0, or broadcast and multicast MAC addresses.
Fix this by correctly reporting -EEXIST in the case of adding the same VSI
to a switch rule already converted to ICE_FWD_TO_VSI_LIST.
Fixes: 9daf8208dd4d ("ice: Add support for switch filter programming")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Sriram Yagnaraman <sriram.yagnaraman@ericsson.com>
Date: Thu Aug 22 09:42:07 2024 +0200
igb: Always call igb_xdp_ring_update_tail() under Tx lock
[ Upstream commit 27717f8b17c098c4373ddb8fe89e1a1899c7779d ]
Always call igb_xdp_ring_update_tail() under __netif_tx_lock, add a comment
and lockdep assert to indicate that. This is needed to share the same TX
ring between XDP, XSK and slow paths. Furthermore, the current XDP
implementation is racy on tail updates.
Fixes: 9cbc948b5a20 ("igb: add XDP support")
Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
[Kurt: Add lockdep assert and fixes tag]
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Marek Vasut <marex@denx.de>
Date: Mon Jul 8 23:18:57 2024 +0200
Input: ads7846 - ratelimit the spi_sync error message
[ Upstream commit ccbfea78adf75d3d9e87aa739dab83254f5333fa ]
In case the touch controller is not connected, this message keeps scrolling
on the console indefinitelly. Ratelimit it to avoid filling kernel logs.
"
ads7846 spi2.1: spi_sync --> -22
"
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20240708211913.171243-1-marex@denx.de
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Takashi Iwai <tiwai@suse.de>
Date: Wed Aug 14 12:06:19 2024 +0200
Input: i8042 - add Fujitsu Lifebook E756 to i8042 quirk table
[ Upstream commit 7ce7c2283fa6843ab3c2adfeb83dcc504a107858 ]
Yet another quirk entry for Fujitsu laptop. Lifebook E756 requires
i8041.nomux for keeping the touchpad working after suspend/resume.
Link: https://bugzilla.suse.com/show_bug.cgi?id=1229056
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240814100630.2048-1-tiwai@suse.de
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jonathan Denose <jdenose@google.com>
Date: Tue Jul 23 21:33:30 2024 -0700
Input: synaptics - enable SMBus for HP Elitebook 840 G2
[ Upstream commit da897484557b34a54fabb81f6c223c19a69e546d ]
The kernel reports that the touchpad for this device can support a
different bus.
With SMBus enabled the touchpad movement is smoother and three-finger
gestures are recognized.
Signed-off-by: Jonathan Denose <jdenose@google.com>
Link: https://lore.kernel.org/r/20240719180612.1.Ib652dd808c274076f32cd7fc6c1160d2cf71753b@changeid
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Namjae Jeon <linkinjeon@kernel.org>
Date: Mon Aug 5 08:56:18 2024 +0900
ksmbd: override fsids for share path check
[ Upstream commit a018c1b636e79b60149b41151ded7c2606d8606e ]
Sangsoo reported that a DAC denial error occurred when accessing
files through the ksmbd thread. This patch override fsids for share
path check.
Reported-by: Sangsoo Lee <constant.lee@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Namjae Jeon <linkinjeon@kernel.org>
Date: Mon Aug 5 08:57:03 2024 +0900
ksmbd: override fsids for smb2_query_info()
[ Upstream commit f6bd41280a44dcc2e0a25ed72617d25f586974a7 ]
Sangsoo reported that a DAC denial error occurred when accessing
files through the ksmbd thread. This patch override fsids for
smb2_query_info().
Reported-by: Sangsoo Lee <constant.lee@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Date: Wed Sep 18 19:23:06 2024 +0200
Linux 6.1.111
Link: https://lore.kernel.org/r/20240916114221.021192667@linuxfoundation.org
Tested-by: Peter Schneider <pschneider1968@googlemail.com>
Tested-by: Yann Sionneau<ysionneau@kalrayinc.com>
Tested-by: Mark Brown <broonie@kernel.org>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Pavel Machek (CIP) <pavel@denx.de>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Date: Wed Sep 11 18:51:11 2024 +0100
minmax: reduce min/max macro expansion in atomisp driver
commit 7c6a3a65ace70f12b27b1a27c9a69cb791dc6e91 upstream.
Avoid unnecessary nested min()/max() which results in egregious macro
expansion.
Use clamp_t() as this introduces the least possible expansion, and turn
the {s,u}DIGIT_FITTING() macros into inline functions to avoid the
nested expansion.
This resolves an issue with slackware 15.0 32-bit compilation as
reported by Richard Narron.
Presumably the min/max fixups would be difficult to backport, this patch
should be easier and fix's Richard's problem in 5.15.
Reported-by: Richard Narron <richard@aaazen.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Closes: https://lore.kernel.org/all/4a5321bd-b1f-1832-f0c-cea8694dc5aa@aaazen.com/
Fixes: 867046cc7027 ("minmax: relax check to allow comparison between unsigned arguments and signed constants")
Cc: stable@vger.kernel.org
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Linus Torvalds <torvalds@linux-foundation.org>
Date: Wed Sep 11 17:11:23 2024 -0700
mm: avoid leaving partial pfn mappings around in error case
commit 79a61cc3fc0466ad2b7b89618a6157785f0293b3 upstream.
As Jann points out, PFN mappings are special, because unlike normal
memory mappings, there is no lifetime information associated with the
mapping - it is just a raw mapping of PFNs with no reference counting of
a 'struct page'.
That's all very much intentional, but it does mean that it's easy to
mess up the cleanup in case of errors. Yes, a failed mmap() will always
eventually clean up any partial mappings, but without any explicit
lifetime in the page table mapping itself, it's very easy to do the
error handling in the wrong order.
In particular, it's easy to mistakenly free the physical backing store
before the page tables are actually cleaned up and (temporarily) have
stale dangling PTE entries.
To make this situation less error-prone, just make sure that any partial
pfn mapping is torn down early, before any other error handling.
Reported-and-tested-by: Jann Horn <jannh@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Simona Vetter <simona.vetter@ffwll.ch>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Edward Adam Davis <eadavis@qq.com>
Date: Tue Sep 10 17:58:56 2024 +0800
mptcp: pm: Fix uaf in __timer_delete_sync
commit b4cd80b0338945a94972ac3ed54f8338d2da2076 upstream.
There are two paths to access mptcp_pm_del_add_timer, result in a race
condition:
CPU1 CPU2
==== ====
net_rx_action
napi_poll netlink_sendmsg
__napi_poll netlink_unicast
process_backlog netlink_unicast_kernel
__netif_receive_skb genl_rcv
__netif_receive_skb_one_core netlink_rcv_skb
NF_HOOK genl_rcv_msg
ip_local_deliver_finish genl_family_rcv_msg
ip_protocol_deliver_rcu genl_family_rcv_msg_doit
tcp_v4_rcv mptcp_pm_nl_flush_addrs_doit
tcp_v4_do_rcv mptcp_nl_remove_addrs_list
tcp_rcv_established mptcp_pm_remove_addrs_and_subflows
tcp_data_queue remove_anno_list_by_saddr
mptcp_incoming_options mptcp_pm_del_add_timer
mptcp_pm_del_add_timer kfree(entry)
In remove_anno_list_by_saddr(running on CPU2), after leaving the critical
zone protected by "pm.lock", the entry will be released, which leads to the
occurrence of uaf in the mptcp_pm_del_add_timer(running on CPU1).
Keeping a reference to add_timer inside the lock, and calling
sk_stop_timer_sync() with this reference, instead of "entry->add_timer".
Move list_del(&entry->list) to mptcp_pm_del_add_timer and inside the pm lock,
do not directly access any members of the entry outside the pm lock, which
can avoid similar "entry->x" uaf.
Fixes: 00cfd77b9063 ("mptcp: retransmit ADD_ADDR when timeout")
Cc: stable@vger.kernel.org
Reported-and-tested-by: syzbot+f3a31fb909db9b2a5c4d@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=f3a31fb909db9b2a5c4d
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://patch.msgid.link/tencent_7142963A37944B4A74EF76CD66EA3C253609@qq.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Carolina Jubran <cjubran@nvidia.com>
Date: Mon Aug 5 10:03:20 2024 +0300
net/mlx5: Add missing masks and QoS bit masks for scheduling elements
[ Upstream commit 452ef7f86036392005940de54228d42ca0044192 ]
Add the missing masks for supported element types and Transmit
Scheduling Arbiter (TSAR) types in scheduling elements.
Also, add the corresponding bit masks for these types in the QoS
capabilities of a NIC scheduler.
Fixes: 214baf22870c ("net/mlx5e: Support HTB offload")
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Cosmin Ratiu <cratiu@nvidia.com>
Date: Fri Jun 14 00:00:31 2024 +0300
net/mlx5: Correct TASR typo into TSAR
[ Upstream commit e575d3a6dd22123888defb622b1742aa2d45b942 ]
TSAR is the correct spelling (Transmit Scheduling ARbiter).
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20240613210036.1125203-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 861cd9b9cb62 ("net/mlx5: Verify support for scheduling element and TSAR type")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Carolina Jubran <cjubran@nvidia.com>
Date: Mon Sep 2 11:46:14 2024 +0300
net/mlx5: Explicitly set scheduling element and TSAR type
[ Upstream commit c88146abe4d0f8cf659b2b8883fdc33936d2e3b8 ]
Ensure the scheduling element type and TSAR type are explicitly
initialized in the QoS rate group creation.
This prevents potential issues due to default values.
Fixes: 1ae258f8b343 ("net/mlx5: E-switch, Introduce rate limiting groups API")
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Benjamin Poirier <bpoirier@nvidia.com>
Date: Fri Aug 30 08:39:27 2024 -0400
net/mlx5: Fix bridge mode operations when there are no VFs
[ Upstream commit b1d305abef4640af1b4f1b4774d513cd81b10cfc ]
Currently, trying to set the bridge mode attribute when numvfs=0 leads to a
crash:
bridge link set dev eth2 hwmode vepa
[ 168.967392] BUG: kernel NULL pointer dereference, address: 0000000000000030
[...]
[ 168.969989] RIP: 0010:mlx5_add_flow_rules+0x1f/0x300 [mlx5_core]
[...]
[ 168.976037] Call Trace:
[ 168.976188] <TASK>
[ 168.978620] _mlx5_eswitch_set_vepa_locked+0x113/0x230 [mlx5_core]
[ 168.979074] mlx5_eswitch_set_vepa+0x7f/0xa0 [mlx5_core]
[ 168.979471] rtnl_bridge_setlink+0xe9/0x1f0
[ 168.979714] rtnetlink_rcv_msg+0x159/0x400
[ 168.980451] netlink_rcv_skb+0x54/0x100
[ 168.980675] netlink_unicast+0x241/0x360
[ 168.980918] netlink_sendmsg+0x1f6/0x430
[ 168.981162] ____sys_sendmsg+0x3bb/0x3f0
[ 168.982155] ___sys_sendmsg+0x88/0xd0
[ 168.985036] __sys_sendmsg+0x59/0xa0
[ 168.985477] do_syscall_64+0x79/0x150
[ 168.987273] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 168.987773] RIP: 0033:0x7f8f7950f917
(esw->fdb_table.legacy.vepa_fdb is null)
The bridge mode is only relevant when there are multiple functions per
port. Therefore, prevent setting and getting this setting when there are no
VFs.
Note that after this change, there are no settings to change on the PF
interface using `bridge link` when there are no VFs, so the interface no
longer appears in the `bridge link` output.
Fixes: 4b89251de024 ("net/mlx5: Support ndo bridge_setlink and getlink")
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Maher Sanalla <msanalla@nvidia.com>
Date: Thu Aug 15 11:02:34 2024 +0300
net/mlx5: Update the list of the PCI supported devices
[ Upstream commit 7472d157cb8014103105433bcc0705af2e6f7184 ]
Add the upcoming ConnectX-9 device ID to the table of supported
PCI device IDs.
Fixes: f908a35b2218 ("net/mlx5: Update the list of the PCI supported devices")
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Carolina Jubran <cjubran@nvidia.com>
Date: Mon Aug 5 13:13:03 2024 +0300
net/mlx5: Verify support for scheduling element and TSAR type
[ Upstream commit 861cd9b9cb62feb244b8d77e68fd6ddedbbf66e9 ]
Before creating a scheduling element in a NIC or E-Switch scheduler,
ensure that the requested element type is supported. If the element is
of type Transmit Scheduling Arbiter (TSAR), also verify that the
specific TSAR type is supported.
Fixes: 214baf22870c ("net/mlx5e: Support HTB offload")
Fixes: 85c5f7c9200e ("net/mlx5: E-switch, Create QoS on demand")
Fixes: 0fe132eac38c ("net/mlx5: E-switch, Allow to add vports to rate groups")
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Shahar Shitrit <shshitrit@nvidia.com>
Date: Sun Aug 11 13:56:13 2024 +0300
net/mlx5e: Add missing link modes to ptys2ethtool_map
[ Upstream commit 7617d62cba4a8a3ff3ed3fda0171c43f135c142e ]
Add MLX5E_1000BASE_T and MLX5E_100BASE_TX to the legacy
modes in ptys2legacy_ethtool_table, since they were missing.
Fixes: 665bc53969d7 ("net/mlx5e: Use new ethtool get/set link ksettings API")
Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Sean Anderson <sean.anderson@linux.dev>
Date: Tue Sep 10 10:31:44 2024 -0400
net: dpaa: Pad packets to ETH_ZLEN
[ Upstream commit cbd7ec083413c6a2e0c326d49e24ec7d12c7a9e0 ]
When sending packets under 60 bytes, up to three bytes of the buffer
following the data may be leaked. Avoid this by extending all packets to
ETH_ZLEN, ensuring nothing is leaked in the padding. This bug can be
reproduced by running
$ ping -s 11 destination
Fixes: 9ad1a3749333 ("dpaa_eth: add support for DPAA Ethernet")
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20240910143144.1439910-1-sean.anderson@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Moon Yeounsu <yyyynoom@gmail.com>
Date: Wed Aug 7 19:07:21 2024 +0900
net: ethernet: use ip_hdrlen() instead of bit shift
[ Upstream commit 9a039eeb71a42c8b13408a1976e300f3898e1be0 ]
`ip_hdr(skb)->ihl << 2` is the same as `ip_hdrlen(skb)`
Therefore, we should use a well-defined function not a bit shift
to find the header length.
It also compresses two lines to a single line.
Signed-off-by: Moon Yeounsu <yyyynoom@gmail.com>
Reviewed-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jacky Chou <jacky_chou@aspeedtech.com>
Date: Fri Sep 6 14:28:31 2024 +0800
net: ftgmac100: Enable TX interrupt to avoid TX timeout
[ Upstream commit fef2843bb49f414d1523ca007d088071dee0e055 ]
Currently, the driver only enables RX interrupt to handle RX
packets and TX resources. Sometimes there is not RX traffic,
so the TX resource needs to wait for RX interrupt to free.
This situation will toggle the TX timeout watchdog when the MAC
TX ring has no more resources to transmit packets.
Therefore, enable TX interrupt to release TX resources at any time.
When I am verifying iperf3 over UDP, the network hangs.
Like the log below.
root# iperf3 -c 192.168.100.100 -i1 -t10 -u -b0
Connecting to host 192.168.100.100, port 5201
[ 4] local 192.168.100.101 port 35773 connected to 192.168.100.100 port 5201
[ ID] Interval Transfer Bandwidth Total Datagrams
[ 4] 0.00-20.42 sec 160 KBytes 64.2 Kbits/sec 20
[ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0
[ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0
[ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0
[ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0
[ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0
[ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0
[ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0
[ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0
[ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bandwidth Jitter Lost/Total Datagrams
[ 4] 0.00-20.42 sec 160 KBytes 64.2 Kbits/sec 0.000 ms 0/20 (0%)
[ 4] Sent 20 datagrams
iperf3: error - the server has terminated
The network topology is FTGMAC connects directly to a PC.
UDP does not need to wait for ACK, unlike TCP.
Therefore, FTGMAC needs to enable TX interrupt to release TX resources instead
of waiting for the RX interrupt.
Fixes: 10cbd6407609 ("ftgmac100: Rework NAPI & interrupts handling")
Signed-off-by: Jacky Chou <jacky_chou@aspeedtech.com>
Link: https://patch.msgid.link/20240906062831.2243399-1-jacky_chou@aspeedtech.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Pawel Dembicki <paweldembicki@gmail.com>
Date: Fri Aug 9 21:38:06 2024 +0200
net: phy: vitesse: repair vsc73xx autonegotiation
[ Upstream commit de7a670f8defe4ed2115552ad23dea0f432f7be4 ]
When the vsc73xx mdio bus work properly, the generic autonegotiation
configuration works well.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Willem de Bruijn <willemb@google.com>
Date: Tue Sep 10 17:35:35 2024 -0400
net: tighten bad gso csum offset check in virtio_net_hdr
commit 6513eb3d3191574b58859ef2d6dc26c0277c6f81 upstream.
The referenced commit drops bad input, but has false positives.
Tighten the check to avoid these.
The check detects illegal checksum offload requests, which produce
csum_start/csum_off beyond end of packet after segmentation.
But it is based on two incorrect assumptions:
1. virtio_net_hdr_to_skb with VIRTIO_NET_HDR_GSO_TCP[46] implies GSO.
True in callers that inject into the tx path, such as tap.
But false in callers that inject into rx, like virtio-net.
Here, the flags indicate GRO, and CHECKSUM_UNNECESSARY or
CHECKSUM_NONE without VIRTIO_NET_HDR_F_NEEDS_CSUM is normal.
2. TSO requires checksum offload, i.e., ip_summed == CHECKSUM_PARTIAL.
False, as tcp[46]_gso_segment will fix up csum_start and offset for
all other ip_summed by calling __tcp_v4_send_check.
Because of 2, we can limit the scope of the fix to virtio_net_hdr
that do try to set these fields, with a bogus value.
Link: https://lore.kernel.org/netdev/20240909094527.GA3048202@port70.net/
Fixes: 89add40066f9 ("net: drop bad gso csum_start and offset in virtio_net_hdr")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20240910213553.839926-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Sean Anderson <sean.anderson@linux.dev>
Date: Tue Sep 3 13:51:41 2024 -0400
net: xilinx: axienet: Fix race in axienet_stop
commit 858430db28a5f5a11f8faa3a6fa805438e6f0851 upstream.
axienet_dma_err_handler can race with axienet_stop in the following
manner:
CPU 1 CPU 2
====================== ==================
axienet_stop()
napi_disable()
axienet_dma_stop()
axienet_dma_err_handler()
napi_disable()
axienet_dma_stop()
axienet_dma_start()
napi_enable()
cancel_work_sync()
free_irq()
Fix this by setting a flag in axienet_stop telling
axienet_dma_err_handler not to bother doing anything. I chose not to use
disable_work_sync to allow for easier backporting.
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Fixes: 8a3b7a252dca ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Link: https://patch.msgid.link/20240903175141.4132898-1-sean.anderson@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ Adjusted to apply before dmaengine support ]
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Florian Westphal <fw@strlen.de>
Date: Thu Sep 5 12:54:46 2024 +0200
netfilter: nft_socket: fix sk refcount leaks
[ Upstream commit 8b26ff7af8c32cb4148b3e147c52f9e4c695209c ]
We must put 'sk' reference before returning.
Fixes: 039b1f4f24ec ("netfilter: nft_socket: fix erroneous socket assignment")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Trond Myklebust <trond.myklebust@hammerspace.com>
Date: Wed Aug 21 14:05:02 2024 -0400
NFS: Avoid unnecessary rescanning of the per-server delegation list
[ Upstream commit f92214e4c312f6ea9d78650cc6291d200f17abb6 ]
If the call to nfs_delegation_grab_inode() fails, we will not have
dropped any locks that require us to rescan the list.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Trond Myklebust <trond.myklebust@hammerspace.com>
Date: Wed Aug 21 14:05:01 2024 -0400
NFSv4: Fix clearing of layout segments in layoutreturn
[ Upstream commit d72b7963115bea971a28eaa2cb76722c023f9fdf ]
Make sure that we clear the layout segments in cases where we see a
fatal error, and also in the case where the layout is invalid.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Naveen Mamindlapalli <naveenm@marvell.com>
Date: Fri Sep 6 10:28:38 2024 +0530
octeontx2-af: Modify SMQ flush sequence to drop packets
[ Upstream commit 019aba04f08c2102b35ce7fee9d4628d349f56c0 ]
The current implementation of SMQ flush sequence waits for the packets
in the TM pipeline to be transmitted out of the link. This sequence
doesn't succeed in HW when there is any issue with link such as lack of
link credits, link down or any other traffic that is fully occupying the
link bandwidth (QoS). This patch modifies the SMQ flush sequence to
drop the packets after TL1 level (SQM) instead of polling for the packets
to be sent out of RPM/CGX link.
Fixes: 5d9b976d4480 ("octeontx2-af: Support fixed transmit scheduler topology")
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Reviewed-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Link: https://patch.msgid.link/20240906045838.1620308-1-naveenm@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Naveen Mamindlapalli <naveenm@marvell.com>
Date: Mon Jun 12 11:34:24 2023 +0530
octeontx2-af: Set XOFF on other child transmit schedulers during SMQ flush
[ Upstream commit e18aab0470d8f6259be82282ffb3fdcfeaeff6c3 ]
When multiple transmit scheduler queues feed a TL1 transmit link, the
SMQ flush initiated on a low priority queue might get stuck when a high
priority queue fully subscribes the transmit link. This inturn effects
interface teardown. To avoid this, temporarily XOFF all TL1's other
immediate child transmit scheduler queues and also clear any rate limit
configuration on all the scheduler queues in SMQ(flush) hierarchy.
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 019aba04f08c ("octeontx2-af: Modify SMQ flush sequence to drop packets")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Mika Westerberg <mika.westerberg@linux.intel.com>
Date: Mon Jun 24 12:55:42 2024 +0300
pinctrl: meteorlake: Add Arrow Lake-H/U ACPI ID
commit a366e46da10d7bfa1a52c3bd31f342a3d0e8e7fe upstream.
Intel Arrow Lake-H/U has the same GPIO hardware than Meteor Lake-P but
the ACPI ID is different. Add this new ACPI ID to the list of supported
devices.
Cc: stable@vger.kernel.org
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Maximilian Luz <luzmaximilian@gmail.com>
Date: Sun Aug 11 15:19:45 2024 +0200
platform/surface: aggregator_registry: Add support for Surface Laptop Go 3
[ Upstream commit ed235163c3f02329d5e37ed4485bbc39ed2568d4 ]
Add SAM client device nodes for the Surface Laptop Go 3. It seems to use
the same SAM client devices as the Surface Laptop Go 1 and 2, so re-use
their node group.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20240811131948.261806-3-luzmaximilian@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Maximilian Luz <luzmaximilian@gmail.com>
Date: Sun Aug 11 15:19:44 2024 +0200
platform/surface: aggregator_registry: Add Support for Surface Pro 10
[ Upstream commit 9c8e022567bbec53bee8ae75c44b3d6cd2080d42 ]
Add SAM client device nodes for the Surface Pro 10. It seems to use the
same SAM client devices as the Surface Pro 9, so re-use its node group.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20240811131948.261806-2-luzmaximilian@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Hans de Goede <hdegoede@redhat.com>
Date: Mon Sep 9 13:32:26 2024 +0200
platform/x86: panasonic-laptop: Allocate 1 entry extra in the sinf array
commit 33297cef3101d950cec0033a0dce0a2d2bd59999 upstream.
Some DSDT-s have an off-by-one bug where the SINF package count is
one higher than the SQTY reported value, allocate 1 entry extra.
Also make the SQTY <-> SINF package count mismatch error more verbose
to help debugging similar issues in the future.
This fixes the panasonic-laptop driver failing to probe() on some
devices with the following errors:
[ 3.958887] SQTY reports bad SINF length SQTY: 37 SINF-pkg-count: 38
[ 3.958892] Couldn't retrieve BIOS data
[ 3.983685] Panasonic Laptop Support - With Macros: probe of MAT0019:00 failed with error -5
Fixes: 709ee531c153 ("panasonic-laptop: add Panasonic Let's Note laptop extras driver v0.94")
Cc: stable@vger.kernel.org
Tested-by: James Harmison <jharmison@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240909113227.254470-2-hdegoede@redhat.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Hans de Goede <hdegoede@redhat.com>
Date: Mon Sep 9 13:32:25 2024 +0200
platform/x86: panasonic-laptop: Fix SINF array out of bounds accesses
commit f52e98d16e9bd7dd2b3aef8e38db5cbc9899d6a4 upstream.
The panasonic laptop code in various places uses the SINF array with index
values of 0 - SINF_CUR_BRIGHT(0x0d) without checking that the SINF array
is big enough.
Not all panasonic laptops have this many SINF array entries, for example
the Toughbook CF-18 model only has 10 SINF array entries. So it only
supports the AC+DC brightness entries and mute.
Check that the SINF array has a minimum size which covers all AC+DC
brightness entries and refuse to load if the SINF array is smaller.
For higher SINF indexes hide the sysfs attributes when the SINF array
does not contain an entry for that attribute, avoiding show()/store()
accessing the array out of bounds and add bounds checking to the probe()
and resume() code accessing these.
Fixes: e424fb8cc4e6 ("panasonic-laptop: avoid overflow in acpi_pcc_hotkey_add()")
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240909113227.254470-1-hdegoede@redhat.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Kunwu Chan <chentao@kylinos.cn>
Date: Thu Jan 18 13:42:57 2024 +0800
pmdomain: ti: Add a null pointer check to the omap_prm_domain_init
commit 5d7f58ee08434a33340f75ac7ac5071eea9673b3 upstream.
devm_kasprintf() returns a pointer to dynamically allocated memory
which can be NULL upon failure. Ensure the allocation was successful
by checking the pointer validity.
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Link: https://lore.kernel.org/r/20240118054257.200814-1-chentao@kylinos.cn
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
[Xiangyu: Modified to apply on 6.1.y]
Signed-off-by: Xiangyu Chen <xiangyu.chen@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Christophe Leroy <christophe.leroy@csgroup.eu>
Date: Thu Aug 8 09:05:08 2024 +0200
powerpc/mm: Fix boot warning with hugepages and CONFIG_DEBUG_VIRTUAL
[ Upstream commit e7e846dc6c73fbc94ae8b4ec20d05627646416f2 ]
Booting with CONFIG_DEBUG_VIRTUAL leads to following warning when
passing hugepage reservation on command line:
Kernel command line: hugepagesz=1g hugepages=1 hugepagesz=64m hugepages=1 hugepagesz=256m hugepages=1 noreboot
HugeTLB: allocating 1 of page size 1.00 GiB failed. Only allocated 0 hugepages.
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at arch/powerpc/include/asm/io.h:948 __alloc_bootmem_huge_page+0xd4/0x284
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted 6.10.0-rc6-00396-g6b0e82791bd0-dirty #936
Hardware name: MPC8544DS e500v2 0x80210030 MPC8544 DS
NIP: c1020240 LR: c10201d0 CTR: 00000000
REGS: c13fdd30 TRAP: 0700 Not tainted (6.10.0-rc6-00396-g6b0e82791bd0-dirty)
MSR: 00021000 <CE,ME> CR: 44084288 XER: 20000000
GPR00: c10201d0 c13fde20 c130b560 e8000000 e8001000 00000000 00000000 c1420000
GPR08: 00000000 00028001 00000000 00000004 44084282 01066ac0 c0eb7c9c efffe149
GPR16: c0fc4228 0000005f ffffffff c0eb7d0c c0eb7cc0 c0eb7ce0 ffffffff 00000000
GPR24: c1441cec efffe153 e8001000 c14240c0 00000000 c1441d64 00000000 e8000000
NIP [c1020240] __alloc_bootmem_huge_page+0xd4/0x284
LR [c10201d0] __alloc_bootmem_huge_page+0x64/0x284
Call Trace:
[c13fde20] [c10201d0] __alloc_bootmem_huge_page+0x64/0x284 (unreliable)
[c13fde50] [c10207b8] hugetlb_hstate_alloc_pages+0x8c/0x3e8
[c13fdeb0] [c1021384] hugepages_setup+0x240/0x2cc
[c13fdef0] [c1000574] unknown_bootoption+0xfc/0x280
[c13fdf30] [c0078904] parse_args+0x200/0x4c4
[c13fdfa0] [c1000d9c] start_kernel+0x238/0x7d0
[c13fdff0] [c0000434] set_ivor+0x12c/0x168
Code: 554aa33e 7c042840 3ce0c142 80a7427c 5109a016 50caa016 7c9a2378 7fdcf378 4180000c 7c052040 41810160 7c095040 <0fe00000> 38c00000 40800108 3c60c0eb
---[ end trace 0000000000000000 ]---
This is due to virt_addr_valid() using high_memory before it is set.
high_memory is set in mem_init() using max_low_pfn, but max_low_pfn
is available long before, it is set in mem_topology_setup(). So just
like commit daa9ada2093e ("powerpc/mm: Fix boot crash with FLATMEM")
moved the setting of max_mapnr immediately after the call to
mem_topology_setup(), the same can be done for high_memory.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/62b69c4baad067093f39e7e60df0fe27a86b8d2a.1723100702.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Anders Roxell <anders.roxell@linaro.org>
Date: Mon Aug 5 11:22:34 2024 +0200
scripts: kconfig: merge_config: config files: add a trailing newline
[ Upstream commit 33330bcf031818e60a816db0cfd3add9eecc3b28 ]
When merging files without trailing newlines at the end of the file, two
config fragments end up at the same row if file1.config doens't have a
trailing newline at the end of the file.
file1.config "CONFIG_1=y"
file2.config "CONFIG_2=y"
./scripts/kconfig/merge_config.sh -m .config file1.config file2.config
This will generate a .config looking like this.
cat .config
...
CONFIG_1=yCONFIG_2=y"
Making sure so we add a newline at the end of every config file that is
passed into the script.
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Michal Luczaj <mhal@rbox.co>
Date: Sat Jul 13 21:41:39 2024 +0200
selftests/bpf: Support SOCK_STREAM in unix_inet_redir_to_connected()
[ Upstream commit 1b0ad43177c097d38b967b99c2b71d8be28b0223 ]
Function ignores the AF_UNIX socket type argument, SOCK_DGRAM is hardcoded.
Fix to respect the argument provided.
Fixes: 75e0e27db6cf ("selftest/bpf: Change udp to inet in some function names")
Suggested-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Jakub Sitnicki <jakub@cloudflare.com>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20240713200218.2140950-3-mhal@rbox.co
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: ChenXiaoSong <chenxiaosong@kylinos.cn>
Date: Thu Aug 22 08:20:50 2024 +0000
smb/server: fix return value of smb2_open()
[ Upstream commit 2186a116538a715b20e15f84fdd3545e5fe0a39b ]
In most error cases, error code is not returned in smb2_open(),
__process_request() will not print error message.
Fix this by returning the correct value at the end of smb2_open().
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Date: Mon Sep 9 18:47:46 2024 +0200
soundwire: stream: Revert "soundwire: stream: fix programming slave ports for non-continous port maps"
commit 233a95fd574fde1c375c486540a90304a2d2d49f upstream.
This reverts commit ab8d66d132bc8f1992d3eb6cab8d32dda6733c84 because it
breaks codecs using non-continuous masks in source and sink ports. The
commit missed the point that port numbers are not used as indices for
iterating over prop.sink_ports or prop.source_ports.
Soundwire core and existing codecs expect that the array passed as
prop.sink_ports and prop.source_ports is continuous. The port mask still
might be non-continuous, but that's unrelated.
Reported-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Closes: https://lore.kernel.org/all/b6c75eee-761d-44c8-8413-2a5b34ee2f98@linux.intel.com/
Fixes: ab8d66d132bc ("soundwire: stream: fix programming slave ports for non-continous port maps")
Acked-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20240909164746.136629-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Date: Fri Mar 3 18:19:43 2023 +0100
spi: geni-qcom: Convert to platform remove callback returning void
[ Upstream commit d0b52f6539e008a0d42bf673486bd21b7d2dc191 ]
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230303172041.2103336-30-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: 89e362c883c6 ("spi: geni-qcom: Undo runtime PM changes at driver exit time")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jinjie Ruan <ruanjinjie@huawei.com>
Date: Mon Sep 9 15:31:40 2024 +0800
spi: geni-qcom: Fix incorrect free_irq() sequence
[ Upstream commit b787a33864121a565aeb0e88561bf6062a19f99c ]
In spi_geni_remove(), the free_irq() sequence is different from that
on the probe error path. And the IRQ will still remain and it's interrupt
handler may use the dma channel after release dma channel and before free
irq, which is not secure, fix it.
Fixes: b59c122484ec ("spi: spi-geni-qcom: Add support for GPI dma")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patch.msgid.link/20240909073141.951494-3-ruanjinjie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jinjie Ruan <ruanjinjie@huawei.com>
Date: Mon Sep 9 15:31:39 2024 +0800
spi: geni-qcom: Undo runtime PM changes at driver exit time
[ Upstream commit 89e362c883c65ff94b76b9862285f63545fb5274 ]
It's important to undo pm_runtime_use_autosuspend() with
pm_runtime_dont_use_autosuspend() at driver exit time unless driver
initially enabled pm_runtime with devm_pm_runtime_enable()
(which handles it for you).
Hence, switch to devm_pm_runtime_enable() to fix it, so the
pm_runtime_disable() in probe error path and remove function
can be removed.
Fixes: cfdab2cd85ec ("spi: spi-geni-qcom: Set an autosuspend delay of 250 ms")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patch.msgid.link/20240909073141.951494-2-ruanjinjie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Han Xu <han.xu@nxp.com>
Date: Wed Sep 11 16:11:45 2024 -0500
spi: nxp-fspi: fix the KASAN report out-of-bounds bug
commit 2a8787c1cdc7be24fdd8953ecd1a8743a1006235 upstream.
Change the memcpy length to fix the out-of-bounds issue when writing the
data that is not 4 byte aligned to TX FIFO.
To reproduce the issue, write 3 bytes data to NOR chip.
dd if=3b of=/dev/mtd0
[ 36.926103] ==================================================================
[ 36.933409] BUG: KASAN: slab-out-of-bounds in nxp_fspi_exec_op+0x26ec/0x2838
[ 36.940514] Read of size 4 at addr ffff00081037c2a0 by task dd/455
[ 36.946721]
[ 36.948235] CPU: 3 UID: 0 PID: 455 Comm: dd Not tainted 6.11.0-rc5-gc7b0e37c8434 #1070
[ 36.956185] Hardware name: Freescale i.MX8QM MEK (DT)
[ 36.961260] Call trace:
[ 36.963723] dump_backtrace+0x90/0xe8
[ 36.967414] show_stack+0x18/0x24
[ 36.970749] dump_stack_lvl+0x78/0x90
[ 36.974451] print_report+0x114/0x5cc
[ 36.978151] kasan_report+0xa4/0xf0
[ 36.981670] __asan_report_load_n_noabort+0x1c/0x28
[ 36.986587] nxp_fspi_exec_op+0x26ec/0x2838
[ 36.990800] spi_mem_exec_op+0x8ec/0xd30
[ 36.994762] spi_mem_no_dirmap_read+0x190/0x1e0
[ 36.999323] spi_mem_dirmap_write+0x238/0x32c
[ 37.003710] spi_nor_write_data+0x220/0x374
[ 37.007932] spi_nor_write+0x110/0x2e8
[ 37.011711] mtd_write_oob_std+0x154/0x1f0
[ 37.015838] mtd_write_oob+0x104/0x1d0
[ 37.019617] mtd_write+0xb8/0x12c
[ 37.022953] mtdchar_write+0x224/0x47c
[ 37.026732] vfs_write+0x1e4/0x8c8
[ 37.030163] ksys_write+0xec/0x1d0
[ 37.033586] __arm64_sys_write+0x6c/0x9c
[ 37.037539] invoke_syscall+0x6c/0x258
[ 37.041327] el0_svc_common.constprop.0+0x160/0x22c
[ 37.046244] do_el0_svc+0x44/0x5c
[ 37.049589] el0_svc+0x38/0x78
[ 37.052681] el0t_64_sync_handler+0x13c/0x158
[ 37.057077] el0t_64_sync+0x190/0x194
[ 37.060775]
[ 37.062274] Allocated by task 455:
[ 37.065701] kasan_save_stack+0x2c/0x54
[ 37.069570] kasan_save_track+0x20/0x3c
[ 37.073438] kasan_save_alloc_info+0x40/0x54
[ 37.077736] __kasan_kmalloc+0xa0/0xb8
[ 37.081515] __kmalloc_noprof+0x158/0x2f8
[ 37.085563] mtd_kmalloc_up_to+0x120/0x154
[ 37.089690] mtdchar_write+0x130/0x47c
[ 37.093469] vfs_write+0x1e4/0x8c8
[ 37.096901] ksys_write+0xec/0x1d0
[ 37.100332] __arm64_sys_write+0x6c/0x9c
[ 37.104287] invoke_syscall+0x6c/0x258
[ 37.108064] el0_svc_common.constprop.0+0x160/0x22c
[ 37.112972] do_el0_svc+0x44/0x5c
[ 37.116319] el0_svc+0x38/0x78
[ 37.119401] el0t_64_sync_handler+0x13c/0x158
[ 37.123788] el0t_64_sync+0x190/0x194
[ 37.127474]
[ 37.128977] The buggy address belongs to the object at ffff00081037c2a0
[ 37.128977] which belongs to the cache kmalloc-8 of size 8
[ 37.141177] The buggy address is located 0 bytes inside of
[ 37.141177] allocated 3-byte region [ffff00081037c2a0, ffff00081037c2a3)
[ 37.153465]
[ 37.154971] The buggy address belongs to the physical page:
[ 37.160559] page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x89037c
[ 37.168596] flags: 0xbfffe0000000000(node=0|zone=2|lastcpupid=0x1ffff)
[ 37.175149] page_type: 0xfdffffff(slab)
[ 37.179021] raw: 0bfffe0000000000 ffff000800002500 dead000000000122 0000000000000000
[ 37.186788] raw: 0000000000000000 0000000080800080 00000001fdffffff 0000000000000000
[ 37.194553] page dumped because: kasan: bad access detected
[ 37.200144]
[ 37.201647] Memory state around the buggy address:
[ 37.206460] ffff00081037c180: fa fc fc fc fa fc fc fc fa fc fc fc fa fc fc fc
[ 37.213701] ffff00081037c200: fa fc fc fc 05 fc fc fc 03 fc fc fc 02 fc fc fc
[ 37.220946] >ffff00081037c280: 06 fc fc fc 03 fc fc fc fc fc fc fc fc fc fc fc
[ 37.228186] ^
[ 37.232473] ffff00081037c300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 37.239718] ffff00081037c380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 37.246962] ==================================================================
[ 37.254394] Disabling lock debugging due to kernel taint
0+1 records in
0+1 records out
3 bytes copied, 0.335911 s, 0.0 kB/s
Fixes: a5356aef6a90 ("spi: spi-mem: Add driver for NXP FlexSPI controller")
Cc: stable@kernel.org
Signed-off-by: Han Xu <han.xu@nxp.com>
Link: https://patch.msgid.link/20240911211146.3337068-1-han.xu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Foster Snowhill <forst@pen.gy>
Date: Tue Aug 6 19:28:09 2024 +0200
usbnet: ipheth: fix carrier detection in modes 1 and 4
[ Upstream commit 67927a1b255d883881be9467508e0af9a5e0be9d ]
Apart from the standard "configurations", "interfaces" and "alternate
interface settings" in USB, iOS devices also have a notion of
"modes". In different modes, the device exposes a different set of
available configurations.
Depending on the iOS version, and depending on the current mode, the
length and contents of the carrier state control message differs:
* 1 byte (seen on iOS 4.2.1, 8.4):
* 03: carrier off (mode 0)
* 04: carrier on (mode 0)
* 3 bytes (seen on iOS 10.3.4, 15.7.6):
* 03 03 03: carrier off (mode 0)
* 04 04 03: carrier on (mode 0)
* 4 bytes (seen on iOS 16.5, 17.6):
* 03 03 03 00: carrier off (mode 0)
* 04 03 03 00: carrier off (mode 1)
* 06 03 03 00: carrier off (mode 4)
* 04 04 03 04: carrier on (mode 0 and 1)
* 06 04 03 04: carrier on (mode 4)
Before this change, the driver always used the first byte of the
response to determine carrier state.
From this larger sample, the first byte seems to indicate the number of
available USB configurations in the current mode (with the exception of
the default mode 0), and in some cases (namely mode 1 and 4) does not
correlate with the carrier state.
Previous logic erroneously counted `04 03 03 00` as "carrier on" and
`06 04 03 04` as "carrier off" on iOS versions that support mode 1 and
mode 4 respectively.
Only modes 0, 1 and 4 expose the USB Ethernet interfaces necessary for
the ipheth driver.
Check the second byte of the control message where possible, and fall
back to checking the first byte on older iOS versions.
Signed-off-by: Foster Snowhill <forst@pen.gy>
Tested-by: Georgi Valkov <gvalkov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>