Author: Shuai Xue <xueshuai@linux.alibaba.com>
Date: Sat Sep 24 15:49:53 2022 +0800
ACPI: APEI: do not add task_work to kernel thread to avoid memory leak
[ Upstream commit 415fed694fe11395df56e05022d6e7cee1d39dd3 ]
If an error is detected as a result of user-space process accessing a
corrupt memory location, the CPU may take an abort. Then the platform
firmware reports kernel via NMI like notifications, e.g. NOTIFY_SEA,
NOTIFY_SOFTWARE_DELEGATED, etc.
For NMI like notifications, commit 7f17b4a121d0 ("ACPI: APEI: Kick the
memory_failure() queue for synchronous errors") keep track of whether
memory_failure() work was queued, and make task_work pending to flush out
the queue so that the work is processed before return to user-space.
The code use init_mm to check whether the error occurs in user space:
if (current->mm != &init_mm)
The condition is always true, becase _nobody_ ever has "init_mm" as a real
VM any more.
In addition to abort, errors can also be signaled as asynchronous
exceptions, such as interrupt and SError. In such case, the interrupted
current process could be any kind of thread. When a kernel thread is
interrupted, the work ghes_kick_task_work deferred to task_work will never
be processed because entry_handler returns to call ret_to_kernel() instead
of ret_to_user(). Consequently, the estatus_node alloced from
ghes_estatus_pool in ghes_in_nmi_queue_one_entry() will not be freed.
After around 200 allocations in our platform, the ghes_estatus_pool will
run of memory and ghes_in_nmi_queue_one_entry() returns ENOMEM. As a
result, the event failed to be processed.
sdei: event 805 on CPU 113 failed with error: -2
Finally, a lot of unhandled events may cause platform firmware to exceed
some threshold and reboot.
The condition should generally just do
if (current->mm)
as described in active_mm.rst documentation.
Then if an asynchronous error is detected when a kernel thread is running,
(e.g. when detected by a background scrubber), do not add task_work to it
as the original patch intends to do.
Fixes: 7f17b4a121d0 ("ACPI: APEI: Kick the memory_failure() queue for synchronous errors")
Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Hans de Goede <hdegoede@redhat.com>
Date: Mon Sep 5 14:34:12 2022 +0200
ACPI: tables: FPDT: Don't call acpi_os_map_memory() on invalid phys address
[ Upstream commit 211391bf04b3c74e250c566eeff9cf808156c693 ]
On a Packard Bell Dot SC (Intel Atom N2600 model) there is a FPDT table
which contains invalid physical addresses, with high bits set which fall
outside the range of the CPU-s supported physical address range.
Calling acpi_os_map_memory() on such an invalid phys address leads to
the below WARN_ON in ioremap triggering resulting in an oops/stacktrace.
Add code to verify the physical address before calling acpi_os_map_memory()
to fix / avoid the oops.
[ 1.226900] ioremap: invalid physical address 3001000000000000
[ 1.226949] ------------[ cut here ]------------
[ 1.226962] WARNING: CPU: 1 PID: 1 at arch/x86/mm/ioremap.c:200 __ioremap_caller.cold+0x43/0x5f
[ 1.226996] Modules linked in:
[ 1.227016] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 6.0.0-rc3+ #490
[ 1.227029] Hardware name: Packard Bell dot s/SJE01_CT, BIOS V1.10 07/23/2013
[ 1.227038] RIP: 0010:__ioremap_caller.cold+0x43/0x5f
[ 1.227054] Code: 96 00 00 e9 f8 af 24 ff 89 c6 48 c7 c7 d8 0c 84 99 e8 6a 96 00 00 e9 76 af 24 ff 48 89 fe 48 c7 c7 a8 0c 84 99 e8 56 96 00 00 <0f> 0b e9 60 af 24 ff 48 8b 34 24 48 c7 c7 40 0d 84 99 e8 3f 96 00
[ 1.227067] RSP: 0000:ffffb18c40033d60 EFLAGS: 00010286
[ 1.227084] RAX: 0000000000000032 RBX: 3001000000000000 RCX: 0000000000000000
[ 1.227095] RDX: 0000000000000001 RSI: 00000000ffffdfff RDI: 00000000ffffffff
[ 1.227105] RBP: 3001000000000000 R08: 0000000000000000 R09: ffffb18c40033c18
[ 1.227115] R10: 0000000000000003 R11: ffffffff99d62fe8 R12: 0000000000000008
[ 1.227124] R13: 0003001000000000 R14: 0000000000001000 R15: 3001000000000000
[ 1.227135] FS: 0000000000000000(0000) GS:ffff913a3c080000(0000) knlGS:0000000000000000
[ 1.227146] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1.227156] CR2: 0000000000000000 CR3: 0000000018c26000 CR4: 00000000000006e0
[ 1.227167] Call Trace:
[ 1.227176] <TASK>
[ 1.227185] ? acpi_os_map_iomem+0x1c9/0x1e0
[ 1.227215] ? kmem_cache_alloc_trace+0x187/0x370
[ 1.227254] acpi_os_map_iomem+0x1c9/0x1e0
[ 1.227288] acpi_init_fpdt+0xa8/0x253
[ 1.227308] ? acpi_debugfs_init+0x1f/0x1f
[ 1.227339] do_one_initcall+0x5a/0x300
[ 1.227406] ? rcu_read_lock_sched_held+0x3f/0x80
[ 1.227442] kernel_init_freeable+0x28b/0x2cc
[ 1.227512] ? rest_init+0x170/0x170
[ 1.227538] kernel_init+0x16/0x140
[ 1.227552] ret_from_fork+0x1f/0x30
[ 1.227639] </TASK>
[ 1.227647] irq event stamp: 186819
[ 1.227656] hardirqs last enabled at (186825): [<ffffffff98184a6e>] __up_console_sem+0x5e/0x70
[ 1.227672] hardirqs last disabled at (186830): [<ffffffff98184a53>] __up_console_sem+0x43/0x70
[ 1.227686] softirqs last enabled at (186576): [<ffffffff980fbc9d>] __irq_exit_rcu+0xed/0x160
[ 1.227701] softirqs last disabled at (186569): [<ffffffff980fbc9d>] __irq_exit_rcu+0xed/0x160
[ 1.227715] ---[ end trace 0000000000000000 ]---
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Arvid Norlander <lkml@vorpal.se>
Date: Wed Aug 24 20:49:50 2022 +0200
ACPI: video: Add Toshiba Satellite/Portege Z830 quirk
[ Upstream commit 574160b8548deff8b80b174f03201e94ab8431e2 ]
Toshiba Satellite Z830 needs the quirk video_disable_backlight_sysfs_if
for proper backlight control after suspend/resume cycles.
Toshiba Portege Z830 is simply the same laptop rebranded for certain
markets (I looked through the manual to other language sections to confirm
this) and thus also needs this quirk.
Thanks to Hans de Goede for suggesting this fix.
Link: https://www.spinics.net/lists/platform-driver-x86/msg34394.html
Suggested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Arvid Norlander <lkml@vorpal.se>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Arvid Norlander <lkml@vorpal.se>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Mario Limonciello <mario.limonciello@amd.com>
Date: Thu Sep 15 13:23:14 2022 -0500
ACPI: x86: Add a quirk for Dell Inspiron 14 2-in-1 for StorageD3Enable
[ Upstream commit 018d6711c26e4bd26e20a819fcc7f8ab902608f3 ]
Dell Inspiron 14 2-in-1 has two ACPI nodes under GPP1 both with _ADR of
0, both without _HID. It's ambiguous which the kernel should take, but
it seems to take "DEV0". Unfortunately "DEV0" is missing the device
property `StorageD3Enable` which is present on "NVME".
To avoid this causing problems for suspend, add a quirk for this system
to behave like `StorageD3Enable` property was found.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216440
Reported-and-tested-by: Luya Tshimbalanga <luya@fedoraproject.org>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Andreas Pape <apape@de.adit-jv.com>
Date: Mon Sep 26 18:58:13 2022 +0200
ALSA: dmaengine: increment buffer pointer atomically
[ Upstream commit d1c442019594692c64a70a86ad88eb5b6db92216 ]
Setting pointer and afterwards checking for wraparound leads
to the possibility of returning the inconsistent pointer position.
This patch increments buffer pointer atomically to avoid this issue.
Fixes: e7f73a1613567a ("ASoC: Add dmaengine PCM helper functions")
Signed-off-by: Andreas Pape <apape@de.adit-jv.com>
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Link: https://lore.kernel.org/r/1664211493-11789-1-git-send-email-erosca@de.adit-jv.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Takashi Iwai <tiwai@suse.de>
Date: Sat Oct 1 09:48:10 2022 +0200
ALSA: hda/hdmi: Don't skip notification handling during PM operation
[ Upstream commit 5226c7b9784eee215e3914f440b3c2e1764f67a8 ]
The HDMI driver skips the notification handling from the graphics
driver when the codec driver is being in the PM operation. This
behavior was introduced by the commit eb399d3c99d8 ("ALSA: hda - Skip
ELD notification during PM process"). This skip may cause a problem,
as we may miss the ELD update when the connection/disconnection
happens right at the runtime-PM operation of the audio codec.
Although this workaround was valid at that time, it's no longer true;
the fix was required just because the ELD update procedure needed to
wake up the audio codec, which had lead to a runtime-resume during a
runtime-suspend. Meanwhile, the ELD update procedure doesn't need a
codec wake up any longer since the commit 788d441a164c ("ALSA: hda -
Use component ops for i915 HDMI/DP audio jack handling"); i.e. there
is no much reason for skipping the notification.
Let's drop those checks for addressing the missing notification.
Fixes: 788d441a164c ("ALSA: hda - Use component ops for i915 HDMI/DP audio jack handling")
Reported-by: Brent Lu <brent.lu@intel.com>
Link: https://lore.kernel.org/r/20220927135807.4097052-1-brent.lu@intel.com
Link: https://lore.kernel.org/r/20221001074809.7461-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Saranya Gopal <saranya.gopal@intel.com>
Date: Tue Oct 11 10:19:16 2022 +0530
ALSA: hda/realtek: Add Intel Reference SSID to support headset keys
commit 4f2e56a59b9947b3e698d3cabcb858765c12b1e8 upstream.
This patch fixes the issue with 3.5mm headset keys
on RPL-P platform.
[ Rearranged the entry in SSID order by tiwai ]
Signed-off-by: Saranya Gopal <saranya.gopal@intel.com>
Signed-off-by: Ninad Naik <ninad.naik@intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20221011044916.2278867-1-saranya.gopal@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Luke D. Jones <luke@ljones.dev>
Date: Mon Oct 10 20:03:47 2022 +1300
ALSA: hda/realtek: Add quirk for ASUS GV601R laptop
commit 2ea8e1297801f7b0220ebf6ae61a5b74ca83981e upstream.
The ASUS ROG X16 (GV601R) series laptop has the same node-to-DAC pairs
as early models and the G14, this includes bass speakers which are by
default mapped incorrectly to the 0x06 node.
Add a quirk to use the same DAC pairs as the G14.
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20221010070347.36883-1-luke@ljones.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Luke D. Jones <luke@ljones.dev>
Date: Mon Oct 10 19:57:02 2022 +1300
ALSA: hda/realtek: Correct pin configs for ASUS G533Z
commit 66ba7c88507344dee68ad1acbdb630473ab36114 upstream.
The initial fix for ASUS G533Z was based on faulty information. This
fixes the pincfg to values that have been verified with no existing
module options or other hacks enabled.
Enables headphone jack, and 5.1 surround.
[ corrected the indent level by tiwai ]
Fixes: bc2c23549ccd ("ALSA: hda/realtek: Add pincfg for ASUS G533Z HP jack")
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20221010065702.35190-1-luke@ljones.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Callum Osmotherly <callum.osmotherly@gmail.com>
Date: Wed Oct 5 17:44:16 2022 +1030
ALSA: hda/realtek: remove ALC289_FIXUP_DUAL_SPK for Dell 5530
commit 417b9c51f59734d852e47252476fadc293ad994a upstream.
After some feedback from users with Dell Precision 5530 machines, this
patch reverts the previous change to add ALC289_FIXUP_DUAL_SPK.
While it improved the speaker output quality, it caused the headphone
jack to have an audible "pop" sound when power saving was toggled.
Fixes: 1885ff13d4c4 ("ALSA: hda/realtek: Enable 4-speaker output Dell Precision 5530 laptop")
Signed-off-by: Callum Osmotherly <callum.osmotherly@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/Yz0uyN1zwZhnyRD6@piranha
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Takashi Iwai <tiwai@suse.de>
Date: Tue Sep 6 11:23:06 2022 +0200
ALSA: hda: beep: Simplify keep-power-at-enable behavior
[ Upstream commit 4c8d695cb9bc5f6fd298a586602947b2fc099a64 ]
The recent fix for IDT codecs to keep the power up while the beep is
enabled can be better integrated into the beep helper code.
This patch cleans up the code with refactoring.
Fixes: 414d38ba8710 ("ALSA: hda/sigmatel: Keep power up while beep is enabled")
Link: https://lore.kernel.org/r/20220906092306.26183-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Takashi Iwai <tiwai@suse.de>
Date: Tue Oct 11 09:01:47 2022 +0200
ALSA: oss: Fix potential deadlock at unregistration
commit 97d917879d7f92df09c3f21fd54609a8bcd654b2 upstream.
We took sound_oss_mutex around the calls of unregister_sound_special()
at unregistering OSS devices. This may, however, lead to a deadlock,
because we manage the card release via the card's device object, and
the release may happen at unregister_sound_special() call -- which
will take sound_oss_mutex again in turn.
Although the deadlock might be fixed by relaxing the rawmidi mutex in
the previous commit, it's safer to move unregister_sound_special()
calls themselves out of the sound_oss_mutex, too. The call is
race-safe as the function has a spinlock protection by itself.
Link: https://lore.kernel.org/r/CAB7eexJP7w1B0mVgDF0dQ+gWor7UdkiwPczmL7pn91xx8xpzOA@mail.gmail.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20221011070147.7611-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Takashi Iwai <tiwai@suse.de>
Date: Tue Oct 11 09:01:46 2022 +0200
ALSA: rawmidi: Drop register_mutex in snd_rawmidi_free()
commit a70aef7982b012e86dfd39fbb235e76a21ae778a upstream.
The register_mutex taken around the dev_unregister callback call in
snd_rawmidi_free() may potentially lead to a mutex deadlock, when OSS
emulation and a hot unplug are involved.
Since the mutex doesn't protect the actual race (as the registration
itself is already protected by another means), let's drop it.
Link: https://lore.kernel.org/r/CAB7eexJP7w1B0mVgDF0dQ+gWor7UdkiwPczmL7pn91xx8xpzOA@mail.gmail.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20221011070147.7611-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Takashi Iwai <tiwai@suse.de>
Date: Thu Sep 15 10:59:47 2022 +0200
ALSA: usb-audio: Fix last interface check for registration
commit 39efc9c8a973ddff5918191525d1679d0fb368ea upstream.
The recent fix in commit 6392dcd1d0c7 ("ALSA: usb-audio: Register card
at the last interface") tried to delay the card registration until the
last found interface is probed. It assumed that the probe callback
gets called for those later interfaces, but it's not always true; as
the driver loops over the descriptor and probes the matching ones,
it's not separately called via multiple probe calls. This results in
the missing card registration, i.e. no sound device.
For addressing this problem, replace the check whether the last
interface is processed with usb_interface_claimed() instead of the
comparison with the probe interface number.
Fixes: 6392dcd1d0c7 ("ALSA: usb-audio: Register card at the last interface")
Link: https://lore.kernel.org/r/20220915085947.7922-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Takashi Iwai <tiwai@suse.de>
Date: Fri Sep 30 12:01:29 2022 +0200
ALSA: usb-audio: Fix NULL dererence at error path
commit 568be8aaf8a535f79c4db76cabe17b035aa2584d upstream.
At an error path to release URB buffers and contexts, the driver might
hit a NULL dererence for u->urb pointer, when u->buffer_size has been
already set but the actual URB allocation failed.
Fix it by adding the NULL check of urb. Also, make sure that
buffer_size is cleared after the error path or the close.
Cc: <stable@vger.kernel.org>
Reported-by: Sabri N. Ferreiro <snferreiro1@gmail.com>
Link: https://lore.kernel.org/r/CAKG+3NRjTey+fFfUEGwuxL-pi_=T4cUskYG9OzpzHytF+tzYng@mail.gmail.com
Link: https://lore.kernel.org/r/20220930100129.19445-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Takashi Iwai <tiwai@suse.de>
Date: Fri Sep 30 12:01:51 2022 +0200
ALSA: usb-audio: Fix potential memory leaks
commit 6382da0828995af87aa8b8bef28cc61aceb4aff3 upstream.
When the driver hits -ENOMEM at allocating a URB or a buffer, it
aborts and goes to the error path that releases the all previously
allocated resources. However, when -ENOMEM hits at the middle of the
sync EP URB allocation loop, the partially allocated URBs might be
left without released, because ep->nurbs is still zero at that point.
Fix it by setting ep->nurbs at first, so that the error handler loops
over the full URB list.
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220930100151.19461-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Takashi Iwai <tiwai@suse.de>
Date: Sun Sep 4 18:12:47 2022 +0200
ALSA: usb-audio: Register card at the last interface
[ Upstream commit 6392dcd1d0c7034ccf630ec55fc9e5810ecadf3b ]
The USB-audio driver matches per interface, and as default, it
registers the card instance at the very first instance. This can be a
problem for the devices that have multiple interfaces to be probed, as
the udev rule isn't applied properly for the later appearing
interfaces. Although we introduced the delayed_register option and
the quirks for covering those shortcomings, it's nothing but a
workaround for specific devices.
This patch is an another attempt to fix the problem in a more generic
way. Now the driver checks the whole USB device descriptor at the
very first time when an interface is attached to a sound card. It
looks at each matching interface in the descriptor and remembers the
last matching one. The snd_card_register() is invoked only when this
last interface is probed.
After this change, the quirks for the delayed registration become
superfluous, hence they are removed along with the patch. OTOH, the
delayed_register option is still kept, as it might be useful for some
corner cases (e.g. a special driver overtakes the interface probe from
the standard driver, and the last interface probe may miss).
Link: https://lore.kernel.org/r/20220904161247.16461-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Alexander Stein <alexander.stein@ew.tq-group.com>
Date: Thu Sep 15 08:28:54 2022 +0200
arm64: dts: imx8mp: Add snps,gfladj-refclk-lpm-sel quirk to USB nodes
[ Upstream commit 5c3d5ecf48ab06c709c012bf1e8f0c91e1fcd7ad ]
With this set the SOF/ITP counter is based on ref_clk when 2.0 ports are
suspended.
snps,dis-u2-freeclk-exists-quirk can be removed as
snps,gfladj-refclk-lpm-sel also clears the free running clock configuration
bit.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/20220915062855.751881-4-alexander.stein@ew.tq-group.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
Date: Fri Sep 2 10:42:13 2022 +0200
arm64: dts: imx8mq-librem5: Add bq25895 as max17055's power supply
[ Upstream commit 6effe295e1a87408033c29dbcea9d5a5c8b937d5 ]
This allows the userspace to notice that there's not enough
current provided to charge the battery, and also fixes issues
with 0% SOC values being considered invalid.
Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Matt Ranostay <mranostay@ti.com>
Date: Mon Sep 19 13:57:23 2022 -0700
arm64: dts: ti: k3-j7200: fix main pinmux range
[ Upstream commit 0d0a0b4413460383331088b2203ba09a6971bc3a ]
Range size of 0x2b4 was incorrect since there isn't 173 configurable
pins for muxing. Additionally there is a non-addressable region in the
mapping which requires splitting into two ranges.
main_pmx0 -> 67 pins
main_pmx1 -> 3 pins
Fixes: d361ed88455f ("arm64: dts: ti: Add support for J7200 SoC")
Signed-off-by: Matt Ranostay <mranostay@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Tested-by: Vaishnav Achath <vaishnav.a@ti.com>
Link: https://lore.kernel.org/r/20220919205723.8342-1-mranostay@ti.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: James Morse <james.morse@arm.com>
Date: Fri Sep 30 14:19:59 2022 +0100
arm64: errata: Add Cortex-A55 to the repeat tlbi list
commit 171df58028bf4649460fb146a56a58dcb0c8f75a upstream.
Cortex-A55 is affected by an erratum where in rare circumstances the
CPUs may not handle a race between a break-before-make sequence on one
CPU, and another CPU accessing the same page. This could allow a store
to a page that has been unmapped.
Work around this by adding the affected CPUs to the list that needs
TLB sequences to be done twice.
Signed-off-by: James Morse <james.morse@arm.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220930131959.3082594-1-james.morse@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Mark Rutland <mark.rutland@arm.com>
Date: Thu Sep 29 14:45:25 2022 +0100
arm64: ftrace: fix module PLTs with mcount
[ Upstream commit 8cfb08575c6d4585f1ce0deeb189e5c824776b04 ]
Li Huafei reports that mcount-based ftrace with module PLTs was broken
by commit:
a6253579977e4c6f ("arm64: ftrace: consistently handle PLTs.")
When a module PLTs are used and a module is loaded sufficiently far away
from the kernel, we'll create PLTs for any branches which are
out-of-range. These are separate from the special ftrace trampoline
PLTs, which the module PLT code doesn't directly manipulate.
When mcount is in use this is a problem, as each mcount callsite in a
module will be initialized to point to a module PLT, but since commit
a6253579977e4c6f ftrace_make_nop() will assume that the callsite has
been initialized to point to the special ftrace trampoline PLT, and
ftrace_find_callable_addr() rejects other cases.
This means that when ftrace tries to initialize a callsite via
ftrace_make_nop(), the call to ftrace_find_callable_addr() will find
that the `_mcount` stub is out-of-range and is not handled by the ftrace
PLT, resulting in a splat:
| ftrace_test: loading out-of-tree module taints kernel.
| ftrace: no module PLT for _mcount
| ------------[ ftrace bug ]------------
| ftrace failed to modify
| [<ffff800029180014>] 0xffff800029180014
| actual: 44:00:00:94
| Initializing ftrace call sites
| ftrace record flags: 2000000
| (0)
| expected tramp: ffff80000802eb3c
| ------------[ cut here ]------------
| WARNING: CPU: 3 PID: 157 at kernel/trace/ftrace.c:2120 ftrace_bug+0x94/0x270
| Modules linked in:
| CPU: 3 PID: 157 Comm: insmod Tainted: G O 6.0.0-rc6-00151-gcd722513a189-dirty #22
| Hardware name: linux,dummy-virt (DT)
| pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
| pc : ftrace_bug+0x94/0x270
| lr : ftrace_bug+0x21c/0x270
| sp : ffff80000b2bbaf0
| x29: ffff80000b2bbaf0 x28: 0000000000000000 x27: ffff0000c4d38000
| x26: 0000000000000001 x25: ffff800009d7e000 x24: ffff0000c4d86e00
| x23: 0000000002000000 x22: ffff80000a62b000 x21: ffff8000098ebea8
| x20: ffff0000c4d38000 x19: ffff80000aa24158 x18: ffffffffffffffff
| x17: 0000000000000000 x16: 0a0d2d2d2d2d2d2d x15: ffff800009aa9118
| x14: 0000000000000000 x13: 6333626532303830 x12: 3030303866666666
| x11: 203a706d61727420 x10: 6465746365707865 x9 : 3362653230383030
| x8 : c0000000ffffefff x7 : 0000000000017fe8 x6 : 000000000000bff4
| x5 : 0000000000057fa8 x4 : 0000000000000000 x3 : 0000000000000001
| x2 : ad2cb14bb5438900 x1 : 0000000000000000 x0 : 0000000000000022
| Call trace:
| ftrace_bug+0x94/0x270
| ftrace_process_locs+0x308/0x430
| ftrace_module_init+0x44/0x60
| load_module+0x15b4/0x1ce8
| __do_sys_init_module+0x1ec/0x238
| __arm64_sys_init_module+0x24/0x30
| invoke_syscall+0x54/0x118
| el0_svc_common.constprop.4+0x84/0x100
| do_el0_svc+0x3c/0xd0
| el0_svc+0x1c/0x50
| el0t_64_sync_handler+0x90/0xb8
| el0t_64_sync+0x15c/0x160
| ---[ end trace 0000000000000000 ]---
| ---------test_init-----------
Fix this by reverting to the old behaviour of ignoring the old
instruction when initialising an mcount callsite in a module, which was
the behaviour prior to commit a6253579977e4c6f.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Fixes: a6253579977e ("arm64: ftrace: consistently handle PLTs.")
Reported-by: Li Huafei <lihuafei1@huawei.com>
Link: https://lore.kernel.org/linux-arm-kernel/20220929094134.99512-1-lihuafei1@huawei.com
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20220929134525.798593-1-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Conor Dooley <conor.dooley@microchip.com>
Date: Fri Jul 15 18:51:55 2022 +0100
arm64: topology: move store_cpu_topology() to shared code
commit 456797da792fa7cbf6698febf275fe9b36691f78 upstream.
arm64's method of defining a default cpu topology requires only minimal
changes to apply to RISC-V also. The current arm64 implementation exits
early in a uniprocessor configuration by reading MPIDR & claiming that
uniprocessor can rely on the default values.
This is appears to be a hangover from prior to '3102bc0e6ac7 ("arm64:
topology: Stop using MPIDR for topology information")', because the
current code just assigns default values for multiprocessor systems.
With the MPIDR references removed, store_cpu_topolgy() can be moved to
the common arch_topology code.
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Alex Sverdlin <alexander.sverdlin@nokia.com>
Date: Mon Sep 5 16:26:59 2022 +0100
ARM: 9242/1: kasan: Only map modules if CONFIG_KASAN_VMALLOC=n
[ Upstream commit 823f606ab6b4759a1faf0388abcf4fb0776710d2 ]
In case CONFIG_KASAN_VMALLOC=y kasan_populate_vmalloc() allocates the
shadow pages dynamically. But even worse is that kasan_release_vmalloc()
releases them, which is not compatible with create_mapping() of
MODULES_VADDR..MODULES_END range:
BUG: Bad page state in process kworker/9:1 pfn:2068b
page:e5e06160 refcount:0 mapcount:0 mapping:00000000 index:0x0
flags: 0x1000(reserved)
raw: 00001000 e5e06164 e5e06164 00000000 00000000 00000000 ffffffff 00000000
page dumped because: PAGE_FLAGS_CHECK_AT_FREE flag(s) set
bad because of flags: 0x1000(reserved)
Modules linked in: ip_tables
CPU: 9 PID: 154 Comm: kworker/9:1 Not tainted 5.4.188-... #1
Hardware name: LSI Axxia AXM55XX
Workqueue: events do_free_init
unwind_backtrace
show_stack
dump_stack
bad_page
free_pcp_prepare
free_unref_page
kasan_depopulate_vmalloc_pte
__apply_to_page_range
apply_to_existing_page_range
kasan_release_vmalloc
__purge_vmap_area_lazy
_vm_unmap_aliases.part.0
__vunmap
do_free_init
process_one_work
worker_thread
kthread
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Wang Kefeng <wangkefeng.wang@huawei.com>
Date: Tue Sep 13 05:25:51 2022 +0100
ARM: 9244/1: dump: Fix wrong pg_level in walk_pmd()
[ Upstream commit 2ccd19b3ffac07cc7e75a2bd1ed779728bb67197 ]
After ARM supports p4d page tables, the pg_level for note_page()
in walk_pmd() should be 4, not 3, fix it.
Fixes: 84e6ffb2c49c ("arm: add support for folded p4d page tables")
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Wang Kefeng <wangkefeng.wang@huawei.com>
Date: Fri Sep 16 12:10:49 2022 +0100
ARM: 9247/1: mm: set readonly for MT_MEMORY_RO with ARM_LPAE
[ Upstream commit 14ca1a4690750bb54e1049e49f3140ef48958a6e ]
MT_MEMORY_RO is introduced by commit 598f0a99fa8a ("ARM: 9210/1:
Mark the FDT_FIXED sections as shareable"), which is a readonly
memory type for FDT area, but there are some different between
ARM_LPAE and non-ARM_LPAE, we need to setup PMD_SECT_AP2 and
L_PMD_SECT_RDONLY for MT_MEMORY_RO when ARM_LAPE enabled.
non-ARM_LPAE 0xff800000-0xffa00000 2M PGD KERNEL ro NX SHD
ARM_LPAE 0xff800000-0xffc00000 4M PMD RW NX SHD
ARM_LPAE+fix 0xff800000-0xffc00000 4M PMD ro NX SHD
Fixes: 598f0a99fa8a ("ARM: 9210/1: Mark the FDT_FIXED sections as shareable")
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Kees Cook <keescook@chromium.org>
Date: Wed Sep 7 15:41:03 2022 -0700
ARM: decompressor: Include .data.rel.ro.local
[ Upstream commit 1b64daf413acd86c2c13f5443f6b4ef3690c8061 ]
The .data.rel.ro.local section has the same semantics as .data.rel.ro
here, so include it in the .rodata section of the decompressor.
Additionally since the .printk_index section isn't usable outside of
the core kernel, discard it in the decompressor. Avoids these warnings:
arm-linux-gnueabi-ld: warning: orphan section `.data.rel.ro.local' from `arch/arm/boot/compressed/fdt_rw.o' being placed in section `.data.rel.ro.local'
arm-linux-gnueabi-ld: warning: orphan section `.printk_index' from `arch/arm/boot/compressed/fdt_rw.o' being placed in section `.printk_index'
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/linux-mm/202209080545.qMIVj7YM-lkp@intel.com
Cc: Russell King <linux@armlinux.org.uk>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Geert Uytterhoeven <geert+renesas@glider.be>
Date: Tue Sep 27 15:28:26 2022 +0200
ARM: Drop CMDLINE_* dependency on ATAGS
[ Upstream commit 136f4b1ec7c962ee37a787e095fd37b058d72bd3 ]
On arm32, the configuration options to specify the kernel command line
type depend on ATAGS. However, the actual CMDLINE cofiguration option
does not depend on ATAGS, and the code that handles this is not specific
to ATAGS (see drivers/of/fdt.c:early_init_dt_scan_chosen()).
Hence users who desire to override the kernel command line on arm32 must
enable support for ATAGS, even on a pure-DT system. Other architectures
(arm64, loongarch, microblaze, nios2, powerpc, and riscv) do not impose
such a restriction.
Hence drop the dependency on ATAGS.
Fixes: bd51e2f595580fb6 ("ARM: 7506/1: allow for ATAGS to be configured out when DT support is selected")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Date: Mon Sep 26 12:43:53 2022 +0200
ARM: dts: exynos: correct s5k6a3 reset polarity on Midas family
[ Upstream commit 3ba2d4bb9592bf7a6a3fe3dbe711ecfc3d004bab ]
According to s5k6a3 driver code, the reset line for the chip appears to
be active low. This also matches the typical polarity of reset lines in
general. Let's fix it up as having correct polarity in DTS is important
when the driver will be switched over to gpiod API.
Fixes: b4fec64758ab ("ARM: dts: Add camera device nodes for Exynos4412 TRATS2 board")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220913164104.203957-1-dmitry.torokhov@gmail.com
Link: https://lore.kernel.org/r/20220926104354.118578-2-krzysztof.kozlowski@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Date: Tue Sep 27 15:05:03 2022 -0700
ARM: dts: exynos: fix polarity of VBUS GPIO of Origen
[ Upstream commit a08137bd1e0a7ce951dce9ce4a83e39d379b6e1b ]
EHCI Oxynos (drivers/usb/host/ehci-exynos.c) drives VBUS GPIO high when
trying to power up the bus, therefore the GPIO in DTS must be marked as
"active high". This will be important when EHCI driver is converted to
gpiod API that respects declared polarities.
Fixes: 4e8991def565 ("ARM: dts: exynos: Enable AX88760 USB hub on Origen board")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/20220927220504.3744878-1-dmitry.torokhov@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Alexander Stein <alexander.stein@ew.tq-group.com>
Date: Fri Aug 26 07:53:32 2022 +0200
ARM: dts: imx6dl: add missing properties for sram
[ Upstream commit f5848b95633d598bacf0500e0108dc5961af88c0 ]
All 3 properties are required by sram.yaml. Fixes the dtbs_check warning:
sram@900000: '#address-cells' is a required property
sram@900000: '#size-cells' is a required property
sram@900000: 'ranges' is a required property
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Alexander Stein <alexander.stein@ew.tq-group.com>
Date: Fri Aug 26 07:53:31 2022 +0200
ARM: dts: imx6q: add missing properties for sram
[ Upstream commit b11d083c5dcec7c42fe982c854706d404ddd3a5f ]
All 3 properties are required by sram.yaml. Fixes the dtbs_check warning:
sram@900000: '#address-cells' is a required property
sram@900000: '#size-cells' is a required property
sram@900000: 'ranges' is a required property
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Lucas Stach <l.stach@pengutronix.de>
Date: Tue Jul 26 15:05:23 2022 +0200
ARM: dts: imx6qdl-kontron-samx6i: hook up DDC i2c bus
[ Upstream commit afd8f77957e3e83adf21d9229c61ff37f44a177a ]
i2c2 is routed to the pins dedicated as DDC in the module standard.
Reduce clock rate to 100kHz to be in line with VESA standard and hook
this bus up to the HDMI node.
Fixes: 708ed2649ad8 ("ARM: dts: imx6qdl-kontron-samx6i: increase i2c-frequency")
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
[m.felsch@pengutronix.de: add fixes line]
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Alexander Stein <alexander.stein@ew.tq-group.com>
Date: Fri Aug 26 07:53:33 2022 +0200
ARM: dts: imx6qp: add missing properties for sram
[ Upstream commit 088fe5237435ee2f7ed4450519b2ef58b94c832f ]
All 3 properties are required by sram.yaml. Fixes the dtbs_check warning:
sram@940000: '#address-cells' is a required property
sram@940000: '#size-cells' is a required property
sram@940000: 'ranges' is a required property
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Alexander Stein <alexander.stein@ew.tq-group.com>
Date: Fri Aug 26 07:53:34 2022 +0200
ARM: dts: imx6sl: add missing properties for sram
[ Upstream commit 60c9213a1d9941a8b33db570796c3f9be8984974 ]
All 3 properties are required by sram.yaml. Fixes the dtbs_check warning:
sram@900000: '#address-cells' is a required property
sram@900000: '#size-cells' is a required property
sram@900000: 'ranges' is a required property
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Alexander Stein <alexander.stein@ew.tq-group.com>
Date: Fri Aug 26 07:53:35 2022 +0200
ARM: dts: imx6sll: add missing properties for sram
[ Upstream commit 7492a83ed9b7a151e2dd11d64b06da7a7f0fa7f9 ]
All 3 properties are required by sram.yaml. Fixes the dtbs_check warning:
sram@900000: '#address-cells' is a required property
sram@900000: '#size-cells' is a required property
sram@900000: 'ranges' is a required property
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Alexander Stein <alexander.stein@ew.tq-group.com>
Date: Fri Aug 26 07:53:36 2022 +0200
ARM: dts: imx6sx: add missing properties for sram
[ Upstream commit 415432c008b2bce8138841356ba444631cabaa50 ]
All 3 properties are required by sram.yaml. Fixes the dtbs_check warning:
sram@900000: '#address-cells' is a required property
sram@900000: '#size-cells' is a required property
sram@900000: 'ranges' is a required property
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Haibo Chen <haibo.chen@nxp.com>
Date: Mon Jul 25 18:16:22 2022 +0800
ARM: dts: imx7d-sdb: config the max pressure for tsc2046
[ Upstream commit e7c4ebe2f9cd68588eb24ba4ed122e696e2d5272 ]
Use the general touchscreen method to config the max pressure for
touch tsc2046(data sheet suggest 8 bit pressure), otherwise, for
ABS_PRESSURE, when config the same max and min value, weston will
meet the following issue,
[17:19:39.183] event1 - ADS7846 Touchscreen: is tagged by udev as: Touchscreen
[17:19:39.183] event1 - ADS7846 Touchscreen: kernel bug: device has min == max on ABS_PRESSURE
[17:19:39.183] event1 - ADS7846 Touchscreen: was rejected
[17:19:39.183] event1 - not using input device '/dev/input/event1'
This will then cause the APP weston-touch-calibrator can't list touch devices.
root@imx6ul7d:~# weston-touch-calibrator
could not load cursor 'dnd-move'
could not load cursor 'dnd-copy'
could not load cursor 'dnd-none'
No devices listed.
And accroding to binding Doc, "ti,x-max", "ti,y-max", "ti,pressure-max"
belong to the deprecated properties, so remove them. Also for "ti,x-min",
"ti,y-min", "ti,x-plate-ohms", the value set in dts equal to the default
value in driver, so are redundant, also remove here.
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Michael Walle <michael@walle.cc>
Date: Tue Aug 16 02:10:24 2022 +0200
ARM: dts: kirkwood: lsxl: fix serial line
[ Upstream commit 04eabc6ac10fda9424606d9a7ab6ab9a5d95350a ]
Commit 327e15428977 ("ARM: dts: kirkwood: consolidate common pinctrl
settings") unknowingly broke the serial output on this board. Before
this commit, the pinmux was still configured by the bootloader and the
kernel didn't reconfigured it again. This was an oversight by the
initial board support where the pinmux for the serial line was never
configured by the kernel. But with this commit, the serial line will be
reconfigured to the wrong pins. This is especially confusing, because
the output still works, but the input doesn't. Presumingly, the input is
reconfigured to MPP10, but the output is connected to both MPP11 and
MPP5.
Override the pinmux in the board device tree.
Fixes: 327e15428977 ("ARM: dts: kirkwood: consolidate common pinctrl settings")
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Michael Walle <michael@walle.cc>
Date: Tue Aug 16 02:10:25 2022 +0200
ARM: dts: kirkwood: lsxl: remove first ethernet port
[ Upstream commit 2d528eda7c96ce5c70f895854ecd5684bd5d80b9 ]
Both the Linkstation LS-CHLv2 and the LS-XHL have only one ethernet
port. This has always been wrong, i.e. the board code used to set up
both ports, but the driver will play nice and return -ENODEV if the
assiciated PHY is not found. Nevertheless, it is wrong. Remove it.
Fixes: 876e23333511 ("ARM: kirkwood: add gigabit ethernet and mvmdio device tree nodes")
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Marek Behún <kabel@kernel.org>
Date: Wed Jul 27 14:56:10 2022 +0200
ARM: dts: turris-omnia: Fix mpp26 pin name and comment
[ Upstream commit 49e93898f0dc177e645c22d0664813567fd9ec00 ]
There is a bug in Turris Omnia's schematics, whereupon the MPP[26] pin,
which is routed to CN11 pin header, is documented as SPI CS1, but
MPP[26] pin does not support this function. Instead it controls chip
select 2 if in "spi0" mode.
Fix the name of the pin node in pinctrl node and fix the comment in SPI
node.
Fixes: 26ca8b52d6e1 ("ARM: dts: add support for Turris Omnia")
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Date: Tue Sep 6 18:01:05 2022 +0100
ASoC: codecs: tx-macro: fix kcontrol put
[ Upstream commit c1057a08af438e0cf5450c1d977a3011198ed2f8 ]
tx_macro_tx_mixer_put() and tx_macro_dec_mode_put() currently returns zero
eventhough it changes the value.
Fix this, so that change notifications are sent correctly.
Fixes: d207bdea0ca9 ("ASoC: codecs: lpass-tx-macro: add dapm widgets and route")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220906170112.1984-6-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Date: Thu Sep 22 21:44:57 2022 +0200
ASoC: da7219: Fix an error handling path in da7219_register_dai_clks()
[ Upstream commit abb4e4349afe7eecdb0499582f1c777031e3a7c8 ]
If clk_hw_register() fails, the corresponding clk should not be
unregistered.
To handle errors from loops, clean up partial iterations before doing the
goto. So add a clk_hw_unregister().
Then use a while (--i >= 0) loop in the unwind section.
Fixes: 78013a1cf297 ("ASoC: da7219: Fix clock handling around codec level probe")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/e4acceab57a0d9e477a8d5890a45c5309e553e7c.1663875789.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Liang He <windhl@126.com>
Date: Wed Sep 14 21:43:54 2022 +0800
ASoC: eureka-tlv320: Hold reference returned from of_find_xxx API
[ Upstream commit bfb735a3ceff0bab6473bac275da96f9b2a06dec ]
In eukrea_tlv320_probe(), we need to hold the reference returned
from of_find_compatible_node() which has increased the refcount
and then call of_node_put() with it when done.
Fixes: 66f232908de2 ("ASoC: eukrea-tlv320: Add DT support.")
Co-authored-by: Kelin Wang <wangkelin2023@163.com>
Signed-off-by: Liang He <windhl@126.com>
Link: https://lore.kernel.org/r/20220914134354.3995587-1-windhl@126.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dan Carpenter <error27@gmail.com>
Date: Thu Aug 11 14:01:26 2022 +0300
ASoC: mt6359: fix tests for platform_get_irq() failure
[ Upstream commit 51eea3a6fb4d39c2cc71824e6eee5949d7ae4d1c ]
The platform_get_irq() returns negative error codes. It can't actually
return zero, but if it did that should be treated as success.
Fixes: eef07b9e0925 ("ASoC: mediatek: mt6359: add MT6359 accdet jack driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/YvThhr86N3qQM2EO@kili
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Zhang Qilong <zhangqilong3@huawei.com>
Date: Thu Sep 29 00:01:16 2022 +0800
ASoC: mt6660: Fix PM disable depth imbalance in mt6660_i2c_probe
[ Upstream commit b73f11e895e140537e7f8c7251211ccd3ce0782b ]
The pm_runtime_enable will increase power disable depth. Thus
a pairing decrement is needed on the error handling path to
keep it balanced according to context. We fix it by moving
pm_runtime_enable to the endding of mt6660_i2c_probe.
Fixes:f289e55c6eeb4 ("ASoC: Add MediaTek MT6660 Speaker Amp Driver")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20220928160116.125020-5-zhangqilong3@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Date: Fri Sep 2 09:30:30 2022 +0800
ASoC: rsnd: Add check for rsnd_mod_power_on
[ Upstream commit 376be51caf8871419bbcbb755e1e615d30dc3153 ]
As rsnd_mod_power_on() can return negative numbers,
it should be better to check the return value and
deal with the exception.
Fixes: e7d850dd10f4 ("ASoC: rsnd: use mod base common method on SSI-parent")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20220902013030.3691266-1-jiasheng@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jairaj Arava <jairaj.arava@intel.com>
Date: Mon Sep 19 13:44:29 2022 +0200
ASoC: SOF: pci: Change DMI match info to support all Chrome platforms
[ Upstream commit c1c1fc8103f794a10c5c15e3c17879caf4f42c8f ]
In some Chrome platforms if OEM's use their own string as SYS_VENDOR than
"Google", it leads to firmware load failure from intel/sof/community path.
Hence, changing SYS_VENDOR to PRODUCT_FAMILY in which "Google" is used
as common prefix and is supported in all Chrome platforms.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Chao Song <chao.song@intel.com>
Reviewed-by: Curtis Malainey <curtis@malainey.com>
Signed-off-by: Jairaj Arava <jairaj.arava@intel.com>
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220919114429.42700-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Martin Povišer <povik+lin@cutebit.org>
Date: Thu Aug 25 16:02:37 2022 +0200
ASoC: tas2764: Allow mono streams
[ Upstream commit 23204d928a27146d13e11c9383632775345ecca8 ]
The part is a mono speaker amp, but it can do downmix and switch between
left and right channel, so the right channel range is 1 to 2.
(This mirrors commit bf54d97a835d ("ASoC: tas2770: Allow mono streams")
which was a fix to the tas2770 driver.)
Fixes: 827ed8a0fa50 ("ASoC: tas2764: Add the driver for the TAS2764")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220825140241.53963-2-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Martin Povišer <povik+lin@cutebit.org>
Date: Thu Aug 25 16:02:38 2022 +0200
ASoC: tas2764: Drop conflicting set_bias_level power setting
[ Upstream commit 09273f38832406db19a8907a934687cc10660a6b ]
The driver is setting the PWR_CTRL field in both the set_bias_level
callback and on DAPM events of the DAC widget (and also in the
mute_stream method). Drop the set_bias_level callback altogether as the
power setting it does is in conflict with the other code paths.
(This mirrors commit c8a6ae3fe1c8 ("ASoC: tas2770: Drop conflicting
set_bias_level power setting") which was a fix to the tas2770 driver.)
Fixes: 827ed8a0fa50 ("ASoC: tas2764: Add the driver for the TAS2764")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220825140241.53963-3-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Martin Povišer <povik+lin@cutebit.org>
Date: Thu Aug 25 16:02:39 2022 +0200
ASoC: tas2764: Fix mute/unmute
[ Upstream commit f5ad67f13623548e5aff847f89700c178aaf2a98 ]
Because the PWR_CTRL field is modeled as the power state of the DAC
widget, and at the same time it is used to implement mute/unmute, we
need some additional book-keeping to have the right end result no matter
the sequence of calls. Without this fix, one permanently mutes an
ongoing stream by toggling the associated speaker pin control.
(This mirrors commit 1e5907bcb3a3 ("ASoC: tas2770: Fix handling of
mute/unmute") which was a fix to the tas2770 driver.)
Fixes: 827ed8a0fa50 ("ASoC: tas2764: Add the driver for the TAS2764")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220825140241.53963-4-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Date: Wed Sep 21 16:53:53 2022 +0200
ASoC: wcd9335: fix order of Slimbus unprepare/disable
commit ea8ef003aa53ad23e7705c5cab1c4e664faa6c79 upstream.
Slimbus streams are first prepared and then enabled, so the cleanup path
should reverse it. The unprepare sets stream->num_ports to 0 and frees
the stream->ports. Calling disable after unprepare was not really
effective (channels was not deactivated) and could lead to further
issues due to making transfers on unprepared stream.
Fixes: 20aedafdf492 ("ASoC: wcd9335: add support to wcd9335 codec")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220921145354.1683791-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Date: Wed Sep 21 16:53:54 2022 +0200
ASoC: wcd934x: fix order of Slimbus unprepare/disable
commit e96bca7eaa5747633ec638b065630ff83728982a upstream.
Slimbus streams are first prepared and then enabled, so the cleanup path
should reverse it. The unprepare sets stream->num_ports to 0 and frees
the stream->ports. Calling disable after unprepare was not really
effective (channels was not deactivated) and could lead to further
issues due to making transfers on unprepared stream.
Fixes: a61f3b4f476e ("ASoC: wcd934x: add support to wcd9340/wcd9341 codec")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220921145354.1683791-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Zhang Qilong <zhangqilong3@huawei.com>
Date: Thu Sep 29 00:01:15 2022 +0800
ASoC: wm5102: Fix PM disable depth imbalance in wm5102_probe
[ Upstream commit fcbb60820cd3008bb44334a0395e5e57ccb77329 ]
The pm_runtime_enable will increase power disable depth. Thus
a pairing decrement is needed on the error handling path to
keep it balanced according to context. We fix it by moving
pm_runtime_enable to the endding of wm5102_probe.
Fixes:93e8791dd34ca ("ASoC: wm5102: Initial driver")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20220928160116.125020-4-zhangqilong3@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Zhang Qilong <zhangqilong3@huawei.com>
Date: Thu Sep 29 00:01:14 2022 +0800
ASoC: wm5110: Fix PM disable depth imbalance in wm5110_probe
[ Upstream commit 86b46bf1feb83898d89a2b4a8d08d21e9ea277a7 ]
The pm_runtime_enable will increase power disable depth. Thus
a pairing decrement is needed on the error handling path to
keep it balanced according to context. We fix it by moving
pm_runtime_enable to the endding of wm5110_probe.
Fixes:5c6af635fd772 ("ASoC: wm5110: Add audio CODEC driver")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20220928160116.125020-3-zhangqilong3@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Zhang Qilong <zhangqilong3@huawei.com>
Date: Thu Sep 29 00:01:13 2022 +0800
ASoC: wm8997: Fix PM disable depth imbalance in wm8997_probe
[ Upstream commit 41a736ac20602f64773e80f0f5b32cde1830a44a ]
The pm_runtime_enable will increase power disable depth. Thus
a pairing decrement is needed on the error handling path to
keep it balanced according to context. We fix it by moving
pm_runtime_enable to the endding of wm8997_probe
Fixes:40843aea5a9bd ("ASoC: wm8997: Initial CODEC driver")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20220928160116.125020-2-zhangqilong3@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Niklas Cassel <niklas.cassel@wdc.com>
Date: Fri Sep 16 14:28:33 2022 +0200
ata: fix ata_id_has_devslp()
[ Upstream commit 9c6e09a434e1317e09b78b3b69cd384022ec9a03 ]
ACS-5 section
7.13.6.36 Word 78: Serial ATA features supported
states that:
If word 76 is not 0000h or FFFFh, word 78 reports the features supported
by the device. If this word is not supported, the word shall be cleared
to zero.
(This text also exists in really old ACS standards, e.g. ACS-3.)
Additionally, move the macro to the other ATA_ID_FEATURE_SUPP macros
(which already have this check), thus making it more likely that the
next ATA_ID_FEATURE_SUPP macro that is added will include this check.
Fixes: 65fe1f0f66a5 ("ahci: implement aggressive SATA device sleep support")
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Niklas Cassel <niklas.cassel@wdc.com>
Date: Fri Sep 16 14:28:35 2022 +0200
ata: fix ata_id_has_dipm()
[ Upstream commit 630624cb1b5826d753ac8e01a0e42de43d66dedf ]
ACS-5 section
7.13.6.36 Word 78: Serial ATA features supported
states that:
If word 76 is not 0000h or FFFFh, word 78 reports the features supported
by the device. If this word is not supported, the word shall be cleared
to zero.
(This text also exists in really old ACS standards, e.g. ACS-3.)
The problem with ata_id_has_dipm() is that the while it performs a
check against 0 and 0xffff, it performs the check against
ATA_ID_FEATURE_SUPP (word 78), the same word where the feature bit
is stored.
Fix this by performing the check against ATA_ID_SATA_CAPABILITY
(word 76), like required by the spec. The feature bit check itself
is of course still performed against ATA_ID_FEATURE_SUPP (word 78).
Additionally, move the macro to the other ATA_ID_FEATURE_SUPP macros
(which already have this check), thus making it more likely that the
next ATA_ID_FEATURE_SUPP macro that is added will include this check.
Fixes: ca77329fb713 ("[libata] Link power management infrastructure")
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Niklas Cassel <niklas.cassel@wdc.com>
Date: Fri Sep 16 14:28:34 2022 +0200
ata: fix ata_id_has_ncq_autosense()
[ Upstream commit a5fb6bf853148974dbde092ec1bde553bea5e49f ]
ACS-5 section
7.13.6.36 Word 78: Serial ATA features supported
states that:
If word 76 is not 0000h or FFFFh, word 78 reports the features supported
by the device. If this word is not supported, the word shall be cleared
to zero.
(This text also exists in really old ACS standards, e.g. ACS-3.)
Additionally, move the macro to the other ATA_ID_FEATURE_SUPP macros
(which already have this check), thus making it more likely that the
next ATA_ID_FEATURE_SUPP macro that is added will include this check.
Fixes: 5b01e4b9efa0 ("libata: Implement NCQ autosense")
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Niklas Cassel <niklas.cassel@wdc.com>
Date: Fri Sep 16 14:28:32 2022 +0200
ata: fix ata_id_sense_reporting_enabled() and ata_id_has_sense_reporting()
[ Upstream commit 690aa8c3ae308bc696ec8b1b357b995193927083 ]
ACS-5 section
7.13.6.41 Words 85..87, 120: Commands and feature sets supported or enabled
states that:
If bit 15 of word 86 is set to one, bit 14 of word 119 is set to one,
and bit 15 of word 119 is cleared to zero, then word 119 is valid.
If bit 15 of word 86 is set to one, bit 14 of word 120 is set to one,
and bit 15 of word 120 is cleared to zero, then word 120 is valid.
(This text also exists in really old ACS standards, e.g. ACS-3.)
Currently, ata_id_sense_reporting_enabled() and
ata_id_has_sense_reporting() both check bit 15 of word 86,
but neither of them check that bit 14 of word 119 is set to one,
or that bit 15 of word 119 is cleared to zero.
Additionally, make ata_id_sense_reporting_enabled() return false
if !ata_id_has_sense_reporting(), similar to how e.g.
ata_id_flush_ext_enabled() returns false if !ata_id_has_flush_ext().
Fixes: e87fd28cf9a2 ("libata: Implement support for sense data reporting")
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Date: Fri Sep 9 22:36:06 2022 +0300
ata: libahci_platform: Sanity check the DT child nodes number
[ Upstream commit 3c132ea6508b34956e5ed88d04936983ec230601 ]
Having greater than AHCI_MAX_PORTS (32) ports detected isn't that critical
from the further AHCI-platform initialization point of view since
exceeding the ports upper limit will cause allocating more resources than
will be used afterwards. But detecting too many child DT-nodes doesn't
seem right since it's very unlikely to have it on an ordinary platform. In
accordance with the AHCI specification there can't be more than 32 ports
implemented at least due to having the CAP.NP field of 5 bits wide and the
PI register of dword size. Thus if such situation is found the DTB must
have been corrupted and the data read from it shouldn't be reliable. Let's
consider that as an erroneous situation and halt further resources
allocation.
Note it's logically more correct to have the nports set only after the
initialization value is checked for being sane. So while at it let's make
sure nports is assigned with a correct value.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Coly Li <colyli@suse.de>
Date: Tue Sep 20 00:16:47 2022 +0800
bcache: fix set_at_max_writeback_rate() for multiple attached devices
[ Upstream commit d2d05b88035d2d51a5bb6c5afec88a0880c73df4 ]
Inside set_at_max_writeback_rate() the calculation in following if()
check is wrong,
if (atomic_inc_return(&c->idle_counter) <
atomic_read(&c->attached_dev_nr) * 6)
Because each attached backing device has its own writeback thread
running and increasing c->idle_counter, the counter increates much
faster than expected. The correct calculation should be,
(counter / dev_nr) < dev_nr * 6
which equals to,
counter < dev_nr * dev_nr * 6
This patch fixes the above mistake with correct calculation, and helper
routine idle_counter_exceeded() is added to make code be more clear.
Reported-by: Mingzhe Zou <mingzhe.zou@easystack.cn>
Signed-off-by: Coly Li <colyli@suse.de>
Acked-by: Mingzhe Zou <mingzhe.zou@easystack.cn>
Link: https://lore.kernel.org/r/20220919161647.81238-6-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Yu Kuai <yukuai3@huawei.com>
Date: Mon Aug 29 10:22:38 2022 +0800
blk-throttle: prevent overflow while calculating wait time
[ Upstream commit 8d6bbaada2e0a65f9012ac4c2506460160e7237a ]
There is a problem found by code review in tg_with_in_bps_limit() that
'bps_limit * jiffy_elapsed_rnd' might overflow. Fix the problem by
calling mul_u64_u64_div_u64() instead.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220829022240.3348319-3-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Yu Kuai <yukuai3@huawei.com>
Date: Tue Sep 13 18:57:49 2022 +0800
blk-wbt: call rq_qos_add() after wb_normal is initialized
commit 8c5035dfbb9475b67c82b3fdb7351236525bf52b upstream.
Our test found a problem that wbt inflight counter is negative, which
will cause io hang(noted that this problem doesn't exist in mainline):
t1: device create t2: issue io
add_disk
blk_register_queue
wbt_enable_default
wbt_init
rq_qos_add
// wb_normal is still 0
/*
* in mainline, disk can't be opened before
* bdev_add(), however, in old kernels, disk
* can be opened before blk_register_queue().
*/
blkdev_issue_flush
// disk size is 0, however, it's not checked
submit_bio_wait
submit_bio
blk_mq_submit_bio
rq_qos_throttle
wbt_wait
bio_to_wbt_flags
rwb_enabled
// wb_normal is 0, inflight is not increased
wbt_queue_depth_changed(&rwb->rqos);
wbt_update_limits
// wb_normal is initialized
rq_qos_track
wbt_track
rq->wbt_flags |= bio_to_wbt_flags(rwb, bio);
// wb_normal is not 0，wbt_flags will be set
t3: io completion
blk_mq_free_request
rq_qos_done
wbt_done
wbt_is_tracked
// return true
__wbt_done
wbt_rqw_done
atomic_dec_return(&rqw->inflight);
// inflight is decreased
commit 8235b5c1e8c1 ("block: call bdev_add later in device_add_disk") can
avoid this problem, however it's better to fix this problem in wbt:
1) Lower kernel can't backport this patch due to lots of refactor.
2) Root cause is that wbt call rq_qos_add() before wb_normal is
initialized.
Fixes: e34cbd307477 ("blk-wbt: add general throttling mechanism")
Cc: <stable@vger.kernel.org>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20220913105749.3086243-1-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Yu Kuai <yukuai3@huawei.com>
Date: Sun Oct 9 18:10:38 2022 +0800
blk-wbt: fix that 'rwb->wc' is always set to 1 in wbt_init()
commit 285febabac4a16655372d23ff43e89ff6f216691 upstream.
commit 8c5035dfbb94 ("blk-wbt: call rq_qos_add() after wb_normal is
initialized") moves wbt_set_write_cache() before rq_qos_add(), which
is wrong because wbt_rq_qos() is still NULL.
Fix the problem by removing wbt_set_write_cache() and setting 'rwb->wc'
directly. Noted that this patch also remove the redundant setting of
'rab->wc'.
Fixes: 8c5035dfbb94 ("blk-wbt: call rq_qos_add() after wb_normal is initialized")
Reported-by: kernel test robot <yujie.liu@intel.com>
Link: https://lore.kernel.org/r/202210081045.77ddf59b-yujie.liu@intel.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20221009101038.1692875-1-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Kiran K <kiran.k@intel.com>
Date: Wed Sep 7 12:49:45 2022 +0530
Bluetooth: btintel: Mark Intel controller to support LE_STATES quirk
[ Upstream commit dd0a1794f4334ddbf9b7c5e7d642aaffff38c69b ]
HarrrisonPeak, CyclonePeak, SnowFieldPeak and SandyPeak controllers
are marked to support HCI_QUIRK_LE_STATES.
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Chethan T N <chethan.tumkur.narayan@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Sean Wang <sean.wang@mediatek.com>
Date: Thu Aug 11 08:49:07 2022 +0800
Bluetooth: btusb: mediatek: fix WMT failure during runtime suspend
[ Upstream commit fd3f106677bac70437dc12e76c827294ed495a44 ]
WMT cmd/event doesn't follow up the generic HCI cmd/event handling, it
needs constantly polling control pipe until the host received the WMT
event, thus, we should require to specifically acquire PM counter on the
USB to prevent the interface from entering auto suspended while WMT
cmd/event in progress.
Fixes: a1c49c434e15 ("Bluetooth: btusb: Add protocol support for MediaTek MT7668U USB devices")
Co-developed-by: Jing Cai <jing.cai@mediatek.com>
Signed-off-by: Jing Cai <jing.cai@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Date: Mon Sep 26 15:44:42 2022 -0700
Bluetooth: hci_core: Fix not handling link timeouts propertly
[ Upstream commit 116523c8fac05d1d26f748fee7919a4ec5df67ea ]
Change that introduced the use of __check_timeout did not account for
link types properly, it always assumes ACL_LINK is used thus causing
hdev->acl_last_tx to be used even in case of LE_LINK and then again
uses ACL_LINK with hci_link_tx_to.
To fix this __check_timeout now takes the link type as parameter and
then procedure to use the right last_tx based on the link type and pass
it to hci_link_tx_to.
Fixes: 1b1d29e51499 ("Bluetooth: Make use of __check_timeout on hci_sched_le")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tested-by: David Beinder <david@beinder.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Date: Mon Sep 19 10:56:59 2022 -0700
Bluetooth: hci_sysfs: Fix attempting to call device_add multiple times
[ Upstream commit 448a496f760664d3e2e79466aa1787e6abc922b5 ]
device_add shall not be called multiple times as stated in its
documentation:
'Do not call this routine or device_register() more than once for
any device structure'
Syzkaller reports a bug as follows [1]:
------------[ cut here ]------------
kernel BUG at lib/list_debug.c:33!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN
[...]
Call Trace:
<TASK>
__list_add include/linux/list.h:69 [inline]
list_add_tail include/linux/list.h:102 [inline]
kobj_kset_join lib/kobject.c:164 [inline]
kobject_add_internal+0x18f/0x8f0 lib/kobject.c:214
kobject_add_varg lib/kobject.c:358 [inline]
kobject_add+0x150/0x1c0 lib/kobject.c:410
device_add+0x368/0x1e90 drivers/base/core.c:3452
hci_conn_add_sysfs+0x9b/0x1b0 net/bluetooth/hci_sysfs.c:53
hci_le_cis_estabilished_evt+0x57c/0xae0 net/bluetooth/hci_event.c:6799
hci_le_meta_evt+0x2b8/0x510 net/bluetooth/hci_event.c:7110
hci_event_func net/bluetooth/hci_event.c:7440 [inline]
hci_event_packet+0x63d/0xfd0 net/bluetooth/hci_event.c:7495
hci_rx_work+0xae7/0x1230 net/bluetooth/hci_core.c:4007
process_one_work+0x991/0x1610 kernel/workqueue.c:2289
worker_thread+0x665/0x1080 kernel/workqueue.c:2436
kthread+0x2e4/0x3a0 kernel/kthread.c:376
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306
</TASK>
Link: https://syzkaller.appspot.com/bug?id=da3246e2d33afdb92d66bc166a0934c5b146404a
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tested-by: Hawkins Jiawei <yin31149@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Date: Mon Aug 29 23:58:12 2022 +0900
Bluetooth: hci_{ldisc,serdev}: check percpu_init_rwsem() failure
[ Upstream commit 3124d320c22f3f4388d9ac5c8f37eaad0cefd6b1 ]
syzbot is reporting NULL pointer dereference at hci_uart_tty_close() [1],
for rcu_sync_enter() is called without rcu_sync_init() due to
hci_uart_tty_open() ignoring percpu_init_rwsem() failure.
While we are at it, fix that hci_uart_register_device() ignores
percpu_init_rwsem() failure and hci_uart_unregister_device() does not
call percpu_free_rwsem().
Link: https://syzkaller.appspot.com/bug?extid=576dfca25381fb6fbc5f [1]
Reported-by: syzbot <syzbot+576dfca25381fb6fbc5f@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Fixes: 67d2f8781b9f00d1 ("Bluetooth: hci_ldisc: Allow sleeping while proto locks are held.")
Fixes: d73e172816652772 ("Bluetooth: hci_serdev: Init hci_uart proto_lock to avoid oops")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Date: Thu Sep 29 13:27:13 2022 -0700
Bluetooth: L2CAP: Fix user-after-free
[ Upstream commit 35fcbc4243aad7e7d020b7c1dfb14bb888b20a4f ]
This uses l2cap_chan_hold_unless_zero() after calling
__l2cap_get_chan_blah() to prevent the following trace:
Bluetooth: l2cap_core.c:static void l2cap_chan_destroy(struct kref
*kref)
Bluetooth: chan 0000000023c4974d
Bluetooth: parent 00000000ae861c08
==================================================================
BUG: KASAN: use-after-free in __mutex_waiter_is_first
kernel/locking/mutex.c:191 [inline]
BUG: KASAN: use-after-free in __mutex_lock_common
kernel/locking/mutex.c:671 [inline]
BUG: KASAN: use-after-free in __mutex_lock+0x278/0x400
kernel/locking/mutex.c:729
Read of size 8 at addr ffff888006a49b08 by task kworker/u3:2/389
Link: https://lore.kernel.org/lkml/20220622082716.478486-1-lee.jones@linaro.org
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sungwoo Kim <iam@sung-woo.kim>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Date: Sun Sep 4 00:32:56 2022 +0900
Bluetooth: L2CAP: initialize delayed works at l2cap_chan_create()
[ Upstream commit 2d2cb3066f2c90cd8ca540b36ba7a55e7f2406e0 ]
syzbot is reporting cancel_delayed_work() without INIT_DELAYED_WORK() at
l2cap_chan_del() [1], for CONF_NOT_COMPLETE flag (which meant to prevent
l2cap_chan_del() from calling cancel_delayed_work()) is cleared by timer
which fires before l2cap_chan_del() is called by closing file descriptor
created by socket(AF_BLUETOOTH, SOCK_STREAM, BTPROTO_L2CAP).
l2cap_bredr_sig_cmd(L2CAP_CONF_REQ) and l2cap_bredr_sig_cmd(L2CAP_CONF_RSP)
are calling l2cap_ertm_init(chan), and they call l2cap_chan_ready() (which
clears CONF_NOT_COMPLETE flag) only when l2cap_ertm_init(chan) succeeded.
l2cap_sock_init() does not call l2cap_ertm_init(chan), and it instead sets
CONF_NOT_COMPLETE flag by calling l2cap_chan_set_defaults(). However, when
connect() is requested, "command 0x0409 tx timeout" happens after 2 seconds
from connect() request, and CONF_NOT_COMPLETE flag is cleared after 4
seconds from connect() request, for l2cap_conn_start() from
l2cap_info_timeout() callback scheduled by
schedule_delayed_work(&conn->info_timer, L2CAP_INFO_TIMEOUT);
in l2cap_connect() is calling l2cap_chan_ready().
Fix this problem by initializing delayed works used by L2CAP_MODE_ERTM
mode as soon as l2cap_chan_create() allocates a channel, like I did in
commit be8597239379f0f5 ("Bluetooth: initialize skb_queue_head at
l2cap_chan_create()").
Link: https://syzkaller.appspot.com/bug?extid=83672956c7aa6af698b3 [1]
Reported-by: syzbot <syzbot+83672956c7aa6af698b3@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Date: Tue Sep 13 16:08:13 2022 -0700
Bluetooth: RFCOMM: Fix possible deadlock on socket shutdown/release
[ Upstream commit 812e92b824c1db16c9519f8624d48a9901a0d38f ]
Due to change to switch to use lock_sock inside rfcomm_sk_state_change
the socket shutdown/release procedure can cause a deadlock:
rfcomm_sock_shutdown():
lock_sock();
__rfcomm_sock_close():
rfcomm_dlc_close():
__rfcomm_dlc_close():
rfcomm_dlc_lock();
rfcomm_sk_state_change():
lock_sock();
To fix this when the call __rfcomm_sock_close is now done without
holding the lock_sock since rfcomm_dlc_lock exists to protect
the dlc data there is no need to use lock_sock in that code path.
Link: https://lore.kernel.org/all/CAD+dNTsbuU4w+Y_P7o+VEN7BYCAbZuwZx2+tH+OTzCdcZF82YA@mail.gmail.com/
Fixes: b7ce436a5d79 ("Bluetooth: switch to lock_sock in RFCOMM")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jianglei Nie <niejianglei2021@163.com>
Date: Fri Sep 30 14:28:43 2022 +0800
bnx2x: fix potential memory leak in bnx2x_tpa_stop()
[ Upstream commit b43f9acbb8942b05252be83ac25a81cec70cc192 ]
bnx2x_tpa_stop() allocates a memory chunk from new_data with
bnx2x_frag_alloc(). The new_data should be freed when gets some error.
But when "pad + len > fp->rx_buf_size" is true, bnx2x_tpa_stop() returns
without releasing the new_data, which will lead to a memory leak.
We should free the new_data with bnx2x_frag_free() when "pad + len >
fp->rx_buf_size" is true.
Fixes: 07b0f00964def8af9321cfd6c4a7e84f6362f728 ("bnx2x: fix possible panic under memory stress")
Signed-off-by: Jianglei Nie <niejianglei2021@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Lorenz Bauer <oss@lmb.io>
Date: Sat Sep 10 11:01:20 2022 +0000
bpf: btf: fix truncated last_member_type_id in btf_struct_resolve
[ Upstream commit a37a32583e282d8d815e22add29bc1e91e19951a ]
When trying to finish resolving a struct member, btf_struct_resolve
saves the member type id in a u16 temporary variable. This truncates
the 32 bit type id value if it exceeds UINT16_MAX.
As a result, structs that have members with type ids > UINT16_MAX and
which need resolution will fail with a message like this:
[67414] STRUCT ff_device size=120 vlen=12
effect_owners type_id=67434 bits_offset=960 Member exceeds struct_size
Fix this by changing the type of last_member_type_id to u32.
Fixes: a0791f0df7d2 ("bpf: fix BTF limits")
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Lorenz Bauer <oss@lmb.io>
Link: https://lore.kernel.org/r/20220910110120.339242-1-oss@lmb.io
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Hou Tao <houtao1@huawei.com>
Date: Wed Aug 31 12:26:27 2022 +0800
bpf: Disable preemption when increasing per-cpu map_locked
[ Upstream commit 2775da21628738ce073a3a6a806adcbaada0f091 ]
Per-cpu htab->map_locked is used to prohibit the concurrent accesses
from both NMI and non-NMI contexts. But since commit 74d862b682f5
("sched: Make migrate_disable/enable() independent of RT"),
migrate_disable() is also preemptible under CONFIG_PREEMPT case, so now
map_locked also disallows concurrent updates from normal contexts
(e.g. userspace processes) unexpectedly as shown below:
process A process B
htab_map_update_elem()
htab_lock_bucket()
migrate_disable()
/* return 1 */
__this_cpu_inc_return()
/* preempted by B */
htab_map_update_elem()
/* the same bucket as A */
htab_lock_bucket()
migrate_disable()
/* return 2, so lock fails */
__this_cpu_inc_return()
return -EBUSY
A fix that seems feasible is using in_nmi() in htab_lock_bucket() and
only checking the value of map_locked for nmi context. But it will
re-introduce dead-lock on bucket lock if htab_lock_bucket() is re-entered
through non-tracing program (e.g. fentry program).
One cannot use preempt_disable() to fix this issue as htab_use_raw_lock
being false causes the bucket lock to be a spin lock which can sleep and
does not work with preempt_disable().
Therefore, use migrate_disable() when using the spinlock instead of
preempt_disable() and defer fixing concurrent updates to when the kernel
has its own BPF memory allocator.
Fixes: 74d862b682f5 ("sched: Make migrate_disable/enable() independent of RT")
Reviewed-by: Hao Luo <haoluo@google.com>
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20220831042629.130006-2-houtao@huaweicloud.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Lee Jones <lee@kernel.org>
Date: Mon Sep 12 14:38:55 2022 +0100
bpf: Ensure correct locking around vulnerable function find_vpid()
[ Upstream commit 83c10cc362d91c0d8d25e60779ee52fdbbf3894d ]
The documentation for find_vpid() clearly states:
"Must be called with the tasklist_lock or rcu_read_lock() held."
Presently we do neither for find_vpid() instance in bpf_task_fd_query().
Add proper rcu_read_lock/unlock() to fix the issue.
Fixes: 41bdc4b40ed6f ("bpf: introduce bpf subcommand BPF_TASK_FD_QUERY")
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220912133855.1218900-1-lee@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Date: Tue Aug 23 03:31:25 2022 +0200
bpf: Fix reference state management for synchronous callbacks
[ Upstream commit 9d9d00ac29d0ef7ce426964de46fa6b380357d0a ]
Currently, verifier verifies callback functions (sync and async) as if
they will be executed once, (i.e. it explores execution state as if the
function was being called once). The next insn to explore is set to
start of subprog and the exit from nested frame is handled using
curframe > 0 and prepare_func_exit. In case of async callback it uses a
customized variant of push_stack simulating a kind of branch to set up
custom state and execution context for the async callback.
While this approach is simple and works when callback really will be
executed only once, it is unsafe for all of our current helpers which
are for_each style, i.e. they execute the callback multiple times.
A callback releasing acquired references of the caller may do so
multiple times, but currently verifier sees it as one call inside the
frame, which then returns to caller. Hence, it thinks it released some
reference that the cb e.g. got access through callback_ctx (register
filled inside cb from spilled typed register on stack).
Similarly, it may see that an acquire call is unpaired inside the
callback, so the caller will copy the reference state of callback and
then will have to release the register with new ref_obj_ids. But again,
the callback may execute multiple times, but the verifier will only
account for acquired references for a single symbolic execution of the
callback, which will cause leaks.
Note that for async callback case, things are different. While currently
we have bpf_timer_set_callback which only executes it once, even for
multiple executions it would be safe, as reference state is NULL and
check_reference_leak would force program to release state before
BPF_EXIT. The state is also unaffected by analysis for the caller frame.
Hence async callback is safe.
Since we want the reference state to be accessible, e.g. for pointers
loaded from stack through callback_ctx's PTR_TO_STACK, we still have to
copy caller's reference_state to callback's bpf_func_state, but we
enforce that whatever references it adds to that reference_state has
been released before it hits BPF_EXIT. This requires introducing a new
callback_ref member in the reference state to distinguish between caller
vs callee references. Hence, check_reference_leak now errors out if it
sees we are in callback_fn and we have not released callback_ref refs.
Since there can be multiple nested callbacks, like frame 0 -> cb1 -> cb2
etc. we need to also distinguish between whether this particular ref
belongs to this callback frame or parent, and only error for our own, so
we store state->frameno (which is always non-zero for callbacks).
In short, callbacks can read parent reference_state, but cannot mutate
it, to be able to use pointers acquired by the caller. They must only
undo their changes (by releasing their own acquired_refs before
BPF_EXIT) on top of caller reference_state before returning (at which
point the caller and callback state will match anyway, so no need to
copy it back to caller).
Fixes: 69c087ba6225 ("bpf: Add bpf_for_each_map_elem() helper")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20220823013125.24938-1-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Hou Tao <houtao1@huawei.com>
Date: Wed Aug 31 12:26:28 2022 +0800
bpf: Propagate error from htab_lock_bucket() to userspace
[ Upstream commit 66a7a92e4d0d091e79148a4c6ec15d1da65f4280 ]
In __htab_map_lookup_and_delete_batch() if htab_lock_bucket() returns
-EBUSY, it will go to next bucket. Going to next bucket may not only
skip the elements in current bucket silently, but also incur
out-of-bound memory access or expose kernel memory to userspace if
current bucket_cnt is greater than bucket_size or zero.
Fixing it by stopping batch operation and returning -EBUSY when
htab_lock_bucket() fails, and the application can retry or skip the busy
batch as needed.
Fixes: 20b6cc34ea74 ("bpf: Avoid hashtab deadlock with map_locked")
Reported-by: Hao Sun <sunhao.th@gmail.com>
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20220831042629.130006-3-houtao@huaweicloud.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Hou Tao <houtao1@huawei.com>
Date: Thu Sep 1 14:19:35 2022 +0800
bpf: Use this_cpu_{inc|dec|inc_return} for bpf_task_storage_busy
[ Upstream commit 197827a05e13808c60f52632e9887eede63f1c16 ]
Now migrate_disable() does not disable preemption and under some
architectures (e.g. arm64) __this_cpu_{inc|dec|inc_return} are neither
preemption-safe nor IRQ-safe, so for fully preemptible kernel concurrent
lookups or updates on the same task local storage and on the same CPU
may make bpf_task_storage_busy be imbalanced, and
bpf_task_storage_trylock() on the specific cpu will always fail.
Fixing it by using this_cpu_{inc|dec|inc_return} when manipulating
bpf_task_storage_busy.
Fixes: bc235cdb423a ("bpf: Prevent deadlock from recursive bpf_task_storage_[get|delete]")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/r/20220901061938.3789460-2-houtao@huaweicloud.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Quentin Monnet <quentin@isovalent.com>
Date: Mon Aug 15 17:22:05 2022 +0100
bpftool: Clear errno after libcap's checks
[ Upstream commit cea558855c39b7f1f02ff50dcf701ca6596bc964 ]
When bpftool is linked against libcap, the library runs a "constructor"
function to compute the number of capabilities of the running kernel
[0], at the beginning of the execution of the program. As part of this,
it performs multiple calls to prctl(). Some of these may fail, and set
errno to a non-zero value:
# strace -e prctl ./bpftool version
prctl(PR_CAPBSET_READ, CAP_MAC_OVERRIDE) = 1
prctl(PR_CAPBSET_READ, 0x30 /* CAP_??? */) = -1 EINVAL (Invalid argument)
prctl(PR_CAPBSET_READ, CAP_CHECKPOINT_RESTORE) = 1
prctl(PR_CAPBSET_READ, 0x2c /* CAP_??? */) = -1 EINVAL (Invalid argument)
prctl(PR_CAPBSET_READ, 0x2a /* CAP_??? */) = -1 EINVAL (Invalid argument)
prctl(PR_CAPBSET_READ, 0x29 /* CAP_??? */) = -1 EINVAL (Invalid argument)
** fprintf added at the top of main(): we have errno == 1
./bpftool v7.0.0
using libbpf v1.0
features: libbfd, libbpf_strict, skeletons
+++ exited with 0 +++
This has been addressed in libcap 2.63 [1], but until this version is
available everywhere, we can fix it on bpftool side.
Let's clean errno at the beginning of the main() function, to make sure
that these checks do not interfere with the batch mode, where we error
out if errno is set after a bpftool command.
[0] https://git.kernel.org/pub/scm/libs/libcap/libcap.git/tree/libcap/cap_alloc.c?h=libcap-2.65#n20
[1] https://git.kernel.org/pub/scm/libs/libcap/libcap.git/commit/?id=f25a1b7e69f7b33e6afb58b3e38f3450b7d2d9a0
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220815162205.45043-1-quentin@isovalent.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Lam Thai <lamthai@arista.com>
Date: Wed Aug 24 15:59:00 2022 -0700
bpftool: Fix a wrong type cast in btf_dumper_int
[ Upstream commit 7184aef9c0f7a81db8fd18d183ee42481d89bf35 ]
When `data` points to a boolean value, casting it to `int *` is problematic
and could lead to a wrong value being passed to `jsonw_bool`. Change the
cast to `bool *` instead.
Fixes: b12d6ec09730 ("bpf: btf: add btf print functionality")
Signed-off-by: Lam Thai <lamthai@arista.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20220824225859.9038-1-lamthai@arista.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Date: Tue Aug 23 17:28:20 2022 +0200
btrfs: don't print information about space cache or tree every remount
[ Upstream commit dbecac26630014d336a8e5ea67096ff18210fb9c ]
btrfs currently prints information about space cache or free space tree
being in use on every remount, regardless whether such remount actually
enabled or disabled one of these features.
This is actually unnecessary since providing remount options changing the
state of these features will explicitly print the appropriate notice.
Let's instead print such unconditional information just on an initial mount
to avoid filling the kernel log when, for example, laptop-mode-tools
remount the fs on some events.
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Qu Wenruo <wqu@suse.com>
Date: Mon Aug 1 09:35:57 2022 +0800
btrfs: dump extra info if one free space cache has more bitmaps than it should
[ Upstream commit 62cd9d4474282a1eb84f945955c56cbfc42e1ffe ]
There is an internal report on hitting the following ASSERT() in
recalculate_thresholds():
ASSERT(ctl->total_bitmaps <= max_bitmaps);
Above @max_bitmaps is calculated using the following variables:
- bytes_per_bg
8 * 4096 * 4096 (128M) for x86_64/x86.
- block_group->length
The length of the block group.
@max_bitmaps is the rounded up value of block_group->length / 128M.
Normally one free space cache should not have more bitmaps than above
value, but when it happens the ASSERT() can be triggered if
CONFIG_BTRFS_ASSERT is also enabled.
But the ASSERT() itself won't provide enough info to know which is going
wrong.
Is the bg too small thus it only allows one bitmap?
Or is there something else wrong?
So although I haven't found extra reports or crash dump to do further
investigation, add the extra info to make it more helpful to debug.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Filipe Manana <fdmanana@suse.com>
Date: Tue Aug 23 12:45:42 2022 +0100
btrfs: fix race between quota enable and quota rescan ioctl
commit 331cd9461412e103d07595a10289de90004ac890 upstream.
When enabling quotas, at btrfs_quota_enable(), after committing the
transaction, we change fs_info->quota_root to point to the quota root we
created and set BTRFS_FS_QUOTA_ENABLED at fs_info->flags. Then we try
to start the qgroup rescan worker, first by initializing it with a call
to qgroup_rescan_init() - however if that fails we end up freeing the
quota root but we leave fs_info->quota_root still pointing to it, this
can later result in a use-after-free somewhere else.
We have previously set the flags BTRFS_FS_QUOTA_ENABLED and
BTRFS_QGROUP_STATUS_FLAG_ON, so we can only fail with -EINPROGRESS at
btrfs_quota_enable(), which is possible if someone already called the
quota rescan ioctl, and therefore started the rescan worker.
So fix this by ignoring an -EINPROGRESS and asserting we can't get any
other error.
Reported-by: Ye Bin <yebin10@huawei.com>
Link: https://lore.kernel.org/linux-btrfs/20220823015931.421355-1-yebin10@huawei.com/
CC: stable@vger.kernel.org # 4.19+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Qu Wenruo <wqu@suse.com>
Date: Tue Aug 2 14:53:03 2022 +0800
btrfs: scrub: try to fix super block errors
[ Upstream commit f9eab5f0bba76742af654f33d517bf62a0db8f12 ]
[BUG]
The following script shows that, although scrub can detect super block
errors, it never tries to fix it:
mkfs.btrfs -f -d raid1 -m raid1 $dev1 $dev2
xfs_io -c "pwrite 67108864 4k" $dev2
mount $dev1 $mnt
btrfs scrub start -B $dev2
btrfs scrub start -Br $dev2
umount $mnt
The first scrub reports the super error correctly:
scrub done for f3289218-abd3-41ac-a630-202f766c0859
Scrub started: Tue Aug 2 14:44:11 2022
Status: finished
Duration: 0:00:00
Total to scrub: 1.26GiB
Rate: 0.00B/s
Error summary: super=1
Corrected: 0
Uncorrectable: 0
Unverified: 0
But the second read-only scrub still reports the same super error:
Scrub started: Tue Aug 2 14:44:11 2022
Status: finished
Duration: 0:00:00
Total to scrub: 1.26GiB
Rate: 0.00B/s
Error summary: super=1
Corrected: 0
Uncorrectable: 0
Unverified: 0
[CAUSE]
The comments already shows that super block can be easily fixed by
committing a transaction:
/*
* If we find an error in a super block, we just report it.
* They will get written with the next transaction commit
* anyway
*/
But the truth is, such assumption is not always true, and since scrub
should try to repair every error it found (except for read-only scrub),
we should really actively commit a transaction to fix this.
[FIX]
Just commit a transaction if we found any super block errors, after
everything else is done.
We cannot do this just after scrub_supers(), as
btrfs_commit_transaction() will try to pause and wait for the running
scrub, thus we can not call it with scrub_lock hold.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Date: Tue Sep 20 22:43:51 2022 +0900
btrfs: set generation before calling btrfs_clean_tree_block in btrfs_init_new_buffer
commit cbddcc4fa3443fe8cfb2ff8e210deb1f6a0eea38 upstream.
syzbot is reporting uninit-value in btrfs_clean_tree_block() [1], for
commit bc877d285ca3dba2 ("btrfs: Deduplicate extent_buffer init code")
missed that btrfs_set_header_generation() in btrfs_init_new_buffer() must
not be moved to after clean_tree_block() because clean_tree_block() is
calling btrfs_header_generation() since commit 55c69072d6bd5be1 ("Btrfs:
Fix extent_buffer usage when nodesize != leafsize").
Since memzero_extent_buffer() will reset "struct btrfs_header" part, we
can't move btrfs_set_header_generation() to before memzero_extent_buffer().
Just re-add btrfs_set_header_generation() before btrfs_clean_tree_block().
Link: https://syzkaller.appspot.com/bug?extid=fba8e2116a12609b6c59 [1]
Reported-by: syzbot <syzbot+fba8e2116a12609b6c59@syzkaller.appspotmail.com>
Fixes: bc877d285ca3dba2 ("btrfs: Deduplicate extent_buffer init code")
CC: stable@vger.kernel.org # 4.19+
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Ziyang Xuan <william.xuanziyang@huawei.com>
Date: Thu Sep 15 09:55:56 2022 +0800
can: bcm: check the result of can_send() in bcm_can_tx()
[ Upstream commit 3fd7bfd28cfd68ae80a2fe92ea1615722cc2ee6e ]
If can_send() fail, it should not update frames_abs counter
in bcm_can_tx(). Add the result check for can_send() in bcm_can_tx().
Suggested-by: Marc Kleine-Budde <mkl@pengutronix.de>
Suggested-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Link: https://lore.kernel.org/all/9851878e74d6d37aee2f1ee76d68361a46f89458.1663206163.git.william.xuanziyang@huawei.com
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Anssi Hannula <anssi.hannula@bitwise.fi>
Date: Mon Oct 10 17:08:27 2022 +0200
can: kvaser_usb: Fix use of uninitialized completion
commit cd7f30e174d09a02ca2afa5ef093fb0f0352e0d8 upstream.
flush_comp is initialized when CMD_FLUSH_QUEUE is sent to the device and
completed when the device sends CMD_FLUSH_QUEUE_RESP.
This causes completion of uninitialized completion if the device sends
CMD_FLUSH_QUEUE_RESP before CMD_FLUSH_QUEUE is ever sent (e.g. as a
response to a flush by a previously bound driver, or a misbehaving
device).
Fix that by initializing flush_comp in kvaser_usb_init_one() like the
other completions.
This issue is only triggerable after RX URBs have been set up, i.e. the
interface has been opened at least once.
Cc: stable@vger.kernel.org
Fixes: aec5fb2268b7 ("can: kvaser_usb: Add support for Kvaser USB hydra family")
Tested-by: Jimmy Assarsson <extja@kvaser.com>
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://lore.kernel.org/all/20221010150829.199676-3-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Anssi Hannula <anssi.hannula@bitwise.fi>
Date: Mon Oct 10 17:08:29 2022 +0200
can: kvaser_usb_leaf: Fix CAN state after restart
commit 0be1a655fe68c8e6dcadbcbddb69cf2fb29881f5 upstream.
can_restart() expects CMD_START_CHIP to set the error state to
ERROR_ACTIVE as it calls netif_carrier_on() immediately afterwards.
Otherwise the user may immediately trigger restart again and hit a
BUG_ON() in can_restart().
Fix kvaser_usb_leaf set_mode(CMD_START_CHIP) to set the expected state.
Cc: stable@vger.kernel.org
Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices")
Tested-by: Jimmy Assarsson <extja@kvaser.com>
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://lore.kernel.org/all/20221010150829.199676-5-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Anssi Hannula <anssi.hannula@bitwise.fi>
Date: Mon Oct 10 17:08:26 2022 +0200
can: kvaser_usb_leaf: Fix overread with an invalid command
commit 1499ecaea9d2ba68d5e18d80573b4561a8dc4ee7 upstream.
For command events read from the device,
kvaser_usb_leaf_read_bulk_callback() verifies that cmd->len does not
exceed the size of the received data, but the actual kvaser_cmd handlers
will happily read any kvaser_cmd fields without checking for cmd->len.
This can cause an overread if the last cmd in the buffer is shorter than
expected for the command type (with cmd->len showing the actual short
size).
Maximum overread seems to be 22 bytes (CMD_LEAF_LOG_MESSAGE), some of
which are delivered to userspace as-is.
Fix that by verifying the length of command before handling it.
This issue can only occur after RX URBs have been set up, i.e. the
interface has been opened at least once.
Cc: stable@vger.kernel.org
Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices")
Tested-by: Jimmy Assarsson <extja@kvaser.com>
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://lore.kernel.org/all/20221010150829.199676-2-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Anssi Hannula <anssi.hannula@bitwise.fi>
Date: Mon Oct 10 17:08:28 2022 +0200
can: kvaser_usb_leaf: Fix TX queue out of sync after restart
commit 455561fb618fde40558776b5b8435f9420f335db upstream.
The TX queue seems to be implicitly flushed by the hardware during
bus-off or bus-off recovery, but the driver does not reset the TX
bookkeeping.
Despite not resetting TX bookkeeping the driver still re-enables TX
queue unconditionally, leading to "cannot find free context" /
NETDEV_TX_BUSY errors if the TX queue was full at bus-off time.
Fix that by resetting TX bookkeeping on CAN restart.
Tested with 0bfd:0124 Kvaser Mini PCI Express 2xHS FW 4.18.778.
Cc: stable@vger.kernel.org
Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices")
Tested-by: Jimmy Assarsson <extja@kvaser.com>
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://lore.kernel.org/all/20221010150829.199676-4-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Waiman Long <longman@redhat.com>
Date: Thu Sep 1 16:57:36 2022 -0400
cgroup/cpuset: Enable update_tasks_cpumask() on top_cpuset
[ Upstream commit ec5fbdfb99d18482619ac42605cb80fbb56068ee ]
Previously, update_tasks_cpumask() is not supposed to be called with
top cpuset. With cpuset partition that takes CPUs away from the top
cpuset, adjusting the cpus_mask of the tasks in the top cpuset is
necessary. Percpu kthreads, however, are ignored.
Fixes: ee8dde0cd2ce ("cpuset: Add new v2 cpuset.sched.partition flag")
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Michal Koutný <mkoutny@suse.com>
Date: Fri Aug 26 18:52:35 2022 +0200
cgroup: Honor caller's cgroup NS when resolving path
[ Upstream commit 74e4b956eb1cac0e4c10c240339b1bbfbc9a4c48 ]
cgroup_get_from_path() is not widely used function. Its callers presume
the path is resolved under cgroup namespace. (There is one caller
currently and resolving in init NS won't make harm (netfilter). However,
future users may be subject to different effects when resolving
globally.)
Since, there's currently no use for the global resolution, modify the
existing function to take cgroup NS into account.
Fixes: a79a908fd2b0 ("cgroup: introduce cgroup namespaces")
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ronnie Sahlberg <lsahlber@redhat.com>
Date: Tue Sep 20 14:32:02 2022 +1000
cifs: destage dirty pages before re-reading them for cache=none
commit bb44c31cdcac107344dd2fcc3bd0504a53575c51 upstream.
This is the opposite case of kernel bugzilla 216301.
If we mmap a file using cache=none and then proceed to update the mmapped
area these updates are not reflected in a later pread() of that part of the
file.
To fix this we must first destage any dirty pages in the range before
we allow the pread() to proceed.
Cc: stable@vger.kernel.org
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Date: Mon Sep 26 11:36:29 2022 +0800
cifs: Fix the error length of VALIDATE_NEGOTIATE_INFO message
commit e98ecc6e94f4e6d21c06660b0f336df02836694f upstream.
Commit d5c7076b772a ("smb3: add smb3.1.1 to default dialect list")
extend the dialects from 3 to 4, but forget to decrease the extended
length when specific the dialect, then the message length is larger
than expected.
This maybe leak some info through network because not initialize the
message body.
After apply this patch, the VALIDATE_NEGOTIATE_INFO message length is
reduced from 28 bytes to 26 bytes.
Fixes: d5c7076b772a ("smb3: add smb3.1.1 to default dialect list")
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Cc: <stable@vger.kernel.org>
Acked-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Enzo Matsumiya <ematsumiya@suse.de>
Date: Fri Sep 16 20:57:05 2022 -0300
cifs: return correct error in ->calc_signature()
[ Upstream commit 09a1f9a168ae1f69f701689429871793174417d2 ]
If an error happens while getting the key or session in the
->calc_signature implementations, 0 (success) is returned. Fix it by
returning a proper error code.
Since it seems to be highly unlikely to happen wrap the rc check in
unlikely() too.
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Fixes: 32811d242ff6 ("cifs: Start using per session key for smb2/3 for signature generation")
Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Joel Stanley <joel@jms.id.au>
Date: Thu Apr 21 13:34:26 2022 +0930
clk: ast2600: BCLK comes from EPLL
[ Upstream commit b8c1dc9c00b252b3be853720a71b05ed451ddd9f ]
This correction was made in the u-boot SDK recently. There are no
in-tree users of this clock so the impact is minimal.
Fixes: d3d04f6c330a ("clk: Add support for AST2600 SoC")
Link: https://github.com/AspeedTech-BMC/u-boot/commit/8ad54a5ae15f27fea5e894cc2539a20d90019717
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20220421040426.171256-1-joel@jms.id.au
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Date: Fri Sep 30 01:53:58 2022 +0300
clk: baikal-t1: Add SATA internal ref clock buffer
[ Upstream commit 081a9b7c74eae4e12b2cb1b86720f836a8f29247 ]
It turns out the internal SATA reference clock signal will stay
unavailable for the SATA interface consumer until the buffer on it's way
is ungated. So aside with having the actual clock divider enabled we need
to ungate a buffer placed on the signal way to the SATA controller (most
likely some rudiment from the initial SoC release). Seeing the switch flag
is placed in the same register as the SATA-ref clock divider at a
non-standard ffset, let's implement it as a separate clock controller with
the set-rate propagation to the parental clock divider wrapper. As such
we'll be able to disable/enable and still change the original clock source
rate.
Fixes: 353afa3a8d2e ("clk: Add Baikal-T1 CCU Dividers driver")
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Link: https://lore.kernel.org/r/20220929225402.9696-5-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Date: Fri Sep 30 01:53:57 2022 +0300
clk: baikal-t1: Add shared xGMAC ref/ptp clocks internal parent
[ Upstream commit e2eef312762e0b5a5a70d29fe59a245c0a3cffa0 ]
Baikal-T1 CCU reference manual says that both xGMAC reference and xGMAC
PTP clocks are generated by two different wrappers with the same constant
divider thus each producing a 156.25 MHz signal. But for some reason both
of these clock sources are gated by a single switch-flag in the CCU
registers space - CCU_SYS_XGMAC_BASE.BIT(0). In order to make the clocks
handled independently we need to define a shared parental gate so the base
clock signal would be switched off only if both of the child-clocks are
disabled.
Note the ID is intentionally set to -2 since we are going to add a one
more internal clock identifier in the next commit.
Fixes: 353afa3a8d2e ("clk: Add Baikal-T1 CCU Dividers driver")
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Link: https://lore.kernel.org/r/20220929225402.9696-4-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Date: Fri Sep 30 01:53:56 2022 +0300
clk: baikal-t1: Fix invalid xGMAC PTP clock divider
[ Upstream commit 3c742088686ce922704aec5b11d09bcc5a396589 ]
Most likely due to copy-paste mistake the divider has been set to 10 while
according to the SoC reference manual it's supposed to be 8 thus having
PTP clock frequency of 156.25 MHz.
Fixes: 353afa3a8d2e ("clk: Add Baikal-T1 CCU Dividers driver")
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Link: https://lore.kernel.org/r/20220929225402.9696-3-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Stefan Wahren <stefan.wahren@i2se.com>
Date: Sun Sep 4 16:10:37 2022 +0200
clk: bcm2835: fix bcm2835_clock_rate_from_divisor declaration
[ Upstream commit 0b919a3728691c172312dee99ba654055ccd8c84 ]
The return value of bcm2835_clock_rate_from_divisor is always unsigned
and also all caller expect this. So fix the declaration accordingly.
Fixes: 41691b8862e2 ("clk: bcm2835: Add support for programming the audio domain clocks")
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/20220904141037.38816-1-stefan.wahren@i2se.com
Reviewed-by: Ivan T. Ivanov <iivanov@suse.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Maxime Ripard <maxime@cerno.tech>
Date: Mon Sep 26 10:45:09 2022 +0200
clk: bcm2835: Make peripheral PLLC critical
[ Upstream commit 6c5422851d8be8c7451e968fd2e6da41b6109e17 ]
When testing for a series affecting the VEC, it was discovered that
turning off and on the VEC clock is crashing the system.
It turns out that, when disabling the VEC clock, it's the only child of
the PLLC-per clock which will also get disabled. The source of the crash
is PLLC-per being disabled.
It's likely that some other device might not take a clock reference that
it actually needs, but it's unclear which at this point. Let's make
PLLC-per critical so that we don't have that crash.
Reported-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220926084509.12233-1-maxime@cerno.tech
Reviewed-by: Stefan Wahren <stefan.wahren@i2se.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ivan T. Ivanov <iivanov@suse.de>
Date: Mon Sep 12 11:13:04 2022 +0300
clk: bcm2835: Round UART input clock up
[ Upstream commit f690a4d7a8f66430662975511c86819dc9965bcc ]
It was reported that RPi3[1] and RPi Zero 2W boards have issues with
the Bluetooth. It turns out that when switching from initial to
operation speed host and device no longer can talk each other because
host uses incorrect UART baud rate.
The UART driver used in this case is amba-pl011. Original fix, see
below Github link[2], was inside pl011 module, but somehow it didn't
look as the right place to fix. Beside that this original rounding
function is not exactly perfect for all possible clock values. So I
deiced to move the hack to the platform which actually need it.
The UART clock is initialised to be as close to the requested
frequency as possible without exceeding it. Now that there is a
clock manager that returns the actual frequencies, an expected
48MHz clock is reported as 47999625. If the requested baud rate
== requested clock/16, there is no headroom and the slight
reduction in actual clock rate results in failure.
If increasing a clock by less than 0.1% changes it from ..999..
to ..000.., round it up.
[1] https://bugzilla.suse.com/show_bug.cgi?id=1188238
[2] https://github.com/raspberrypi/linux/commit/ab3f1b39537f6d3825b8873006fbe2fc5ff057b7
Cc: Phil Elwell <phil@raspberrypi.com>
Signed-off-by: Ivan T. Ivanov <iivanov@suse.de>
Reviewed-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/20220912081306.24662-1-iivanov@suse.de
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Liang He <windhl@126.com>
Date: Fri Jul 8 16:49:00 2022 +0800
clk: berlin: Add of_node_put() for of_get_parent()
[ Upstream commit 37c381b812dcbfde9c3f1f3d3e75fdfc1b40d5bc ]
In berlin2_clock_setup() and berlin2q_clock_setup(), we need to
call of_node_put() for the reference returned by of_get_parent()
which has increased the refcount. We should call *_put() in fail
path or when it is not used anymore.
Fixes: 26b3b6b959b2 ("clk: berlin: prepare simple-mfd conversion")
Signed-off-by: Liang He <windhl@126.com>
Link: https://lore.kernel.org/r/20220708084900.311684-1-windhl@126.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Lin Yujun <linyujun809@huawei.com>
Date: Wed Sep 14 11:32:06 2022 +0800
clk: imx: scu: fix memleak on platform_device_add() fails
[ Upstream commit 855ae87a2073ebf1b395e020de54fdf9ce7d166f ]
No error handling is performed when platform_device_add()
fails. Add error processing before return, and modified
the return value.
Fixes: 77d8f3068c63 ("clk: imx: scu: add two cells binding support")
Signed-off-by: Lin Yujun <linyujun809@huawei.com>
Link: https://lore.kernel.org/r/20220914033206.98046-1-linyujun809@huawei.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Chen-Yu Tsai <wenst@chromium.org>
Date: Tue Sep 27 12:11:20 2022 +0200
clk: mediatek: mt8183: mfgcfg: Propagate rate changes to parent
[ Upstream commit 9f94f545f258b15bfa6357eb62e1e307b712851e ]
The only clock in the MT8183 MFGCFG block feeds the GPU. Propagate its
rate change requests to its parent, so that DVFS for the GPU can work
properly.
Fixes: acddfc2c261b ("clk: mediatek: Add MT8183 clock support")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220927101128.44758-3-angelogioacchino.delregno@collabora.com
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Liang He <windhl@126.com>
Date: Tue Jun 28 22:10:38 2022 +0800
clk: meson: Hold reference returned by of_get_parent()
[ Upstream commit 89ab396d712f7c91fe94f55cff23460426f5fc81 ]
We should hold the reference returned by of_get_parent() and use it
to call of_node_put() for refcount balance.
Fixes: 88e2da81241e ("clk: meson: aoclk: refactor common code into dedicated file")
Fixes: 6682bd4d443f ("clk: meson: factorise meson64 peripheral clock controller drivers")
Fixes: bb6eddd1d28c ("clk: meson: meson8b: use the HHI syscon if available")
Signed-off-by: Liang He <windhl@126.com>
Link: https://lore.kernel.org/r/20220628141038.168383-1-windhl@126.com
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Liang He <windhl@126.com>
Date: Tue Jun 28 22:31:55 2022 +0800
clk: oxnas: Hold reference returned by of_get_parent()
[ Upstream commit 1d6aa08c54cd0e005210ab8e3b1e92ede70f8a4f ]
In oxnas_stdclk_probe(), we need to hold the reference returned by
of_get_parent() and use it to call of_node_put() for refcount
balance.
Fixes: 0bbd72b4c64f ("clk: Add Oxford Semiconductor OXNAS Standard Clocks")
Signed-off-by: Liang He <windhl@126.com>
Link: https://lore.kernel.org/r/20220628143155.170550-1-windhl@126.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Robert Marko <robimarko@gmail.com>
Date: Fri Aug 19 00:06:22 2022 +0200
clk: qcom: apss-ipq6018: mark apcs_alias0_core_clk as critical
[ Upstream commit 86e78995c93ee182433f965babfccd48417d4dcf ]
While fixing up the driver I noticed that my IPQ8074 board was hanging
after CPUFreq switched the frequency during boot, WDT would eventually
reset it.
So mark apcs_alias0_core_clk as critical since its the clock feeding the
CPU cluster and must never be disabled.
Fixes: 5e77b4ef1b19 ("clk: qcom: Add ipq6018 apss clock controller")
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220818220628.339366-3-robimarko@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Adam Skladowski <a_skl39@protonmail.com>
Date: Tue Aug 30 10:56:18 2022 +0300
clk: qcom: gcc-sm6115: Override default Alpha PLL regs
[ Upstream commit 068a0605ef5a6b430e7278c169bfcd25b680b28f ]
The DEFAULT and BRAMMO PLL offsets are non-standard in downstream, but
currently only BRAMMO ones are overridden. Override DEFAULT ones too.
A very similar thing is happening in gcc-qcm2290 driver.
Fixes: cbe63bfdc54f ("clk: qcom: Add Global Clock controller (GCC) driver for SM6115")
Signed-off-by: Adam Skladowski <a_skl39@protonmail.com>
Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220830075620.974009-2-iskren.chernev@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dang Huynh <danct12@riseup.net>
Date: Sun Sep 11 00:02:07 2022 +0700
clk: qcom: sm6115: Select QCOM_GDSC
[ Upstream commit 50ee65dc512b9b5c4de354cf3b4dded34f46c571 ]
While working on the Fxtec Pro1X device, this error shows up with
my own minimal configuration:
gcc-sm6115: probe of 1400000.clock-controller failed with error -38
The clock driver depends on CONFIG_QCOM_GDSC and after enabling
that, the driver probes successfully.
Signed-off-by: Dang Huynh <danct12@riseup.net>
Fixes: cbe63bfdc54f ("clk: qcom: Add Global Clock controller (GCC)
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220910170207.1592220-1-danct12@riseup.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Liang He <windhl@126.com>
Date: Tue Jun 28 22:38:51 2022 +0800
clk: qoriq: Hold reference returned by of_get_parent()
[ Upstream commit a8ea4273bc26256ce3cce83164f0f51c5bf6e127 ]
In legacy_init_clockgen(), we need to hold the reference returned
by of_get_parent() and use it to call of_node_put() for refcount
balance.
Beside, in create_sysclk(), we need to call of_node_put() on 'sysclk'
also for refcount balance.
Fixes: 0dfc86b3173f ("clk: qoriq: Move chip-specific knowledge into driver")
Signed-off-by: Liang He <windhl@126.com>
Link: https://lore.kernel.org/r/20220628143851.171299-1-windhl@126.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Liang He <windhl@126.com>
Date: Mon Jul 4 08:47:29 2022 +0800
clk: sprd: Hold reference returned by of_get_parent()
[ Upstream commit 91e6455bf715fb1558a0bf8f645ec1c131254a3c ]
We should hold the reference returned by of_get_parent() and use it
to call of_node_put() for refcount balance.
Fixes: f95e8c7923d1 ("clk: sprd: support to get regmap from parent node")
Signed-off-by: Liang He <windhl@126.com>
Link: https://lore.kernel.org/r/20220704004729.272481-1-windhl@126.com
Reviewed-by: Orson Zhai <orsonzhai@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Miaoqian Lin <linmq006@gmail.com>
Date: Mon May 23 19:28:11 2022 +0400
clk: tegra20: Fix refcount leak in tegra20_clock_init
[ Upstream commit 4e343bafe03ff68a62f48f8235cf98f2c685468b ]
of_find_matching_node() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak.
Fixes: 37c26a906527 ("clk: tegra: add clock support for Tegra20")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220523152811.19692-1-linmq006@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Miaoqian Lin <linmq006@gmail.com>
Date: Mon May 23 18:38:34 2022 +0400
clk: tegra: Fix refcount leak in tegra114_clock_init
[ Upstream commit db16a80c76ea395766913082b1e3f939dde29b2c ]
of_find_matching_node() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak.
Fixes: 2cb5efefd6f7 ("clk: tegra: Implement clocks for Tegra114")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220523143834.7587-1-linmq006@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Miaoqian Lin <linmq006@gmail.com>
Date: Mon May 23 18:26:08 2022 +0400
clk: tegra: Fix refcount leak in tegra210_clock_init
[ Upstream commit 56c78cb1f00a9dde8cd762131ce8f4c5eb046fbb ]
of_find_matching_node() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak.
Fixes: 6b301a059eb2 ("clk: tegra: Add support for Tegra210 clocks")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220523142608.65074-1-linmq006@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Miaoqian Lin <linmq006@gmail.com>
Date: Thu Jun 2 07:08:36 2022 +0400
clk: ti: dra7-atl: Fix reference leak in of_dra7_atl_clk_probe
[ Upstream commit 9c59a01caba26ec06fefd6ca1f22d5fd1de57d63 ]
pm_runtime_get_sync() will increment pm usage counter.
Forgetting to putting operation will result in reference leak.
Add missing pm_runtime_put_sync in some error paths.
Fixes: 9ac33b0ce81f ("CLK: TI: Driver for DRA7 ATL (Audio Tracking Logic)")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220602030838.52057-1-linmq006@gmail.com
Reviewed-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Date: Fri Sep 30 01:53:55 2022 +0300
clk: vc5: Fix 5P49V6901 outputs disabling when enabling FOD
[ Upstream commit c388cc804016cf0f65afdc2362b120aa594ff3e6 ]
We have discovered random glitches during the system boot up procedure.
The problem investigation led us to the weird outcomes: when none of the
Renesas 5P49V6901 ports are explicitly enabled by the kernel driver, the
glitches disappeared. It was a mystery since the SoC external clock
domains were fed with different 5P49V6901 outputs. The driver code didn't
seem like bogus either. We almost despaired to find out a root cause when
the solution has been found for a more modern revision of the chip. It
turned out the 5P49V6901 clock generator stopped its output for a short
period of time during the VC5_OUT_DIV_CONTROL register writing. The same
problem was found for the 5P49V6965 revision of the chip and was
successfully fixed in commit fc336ae622df ("clk: vc5: fix output disabling
when enabling a FOD") by enabling the "bypass_sync" flag hidden inside
"Unused Factory Reserved Register". Even though the 5P49V6901 registers
description and programming guide doesn't provide any intel regarding that
flag, setting it up anyway in the officially unused register completely
eliminated the denoted glitches. Thus let's activate the functionality
submitted in commit fc336ae622df ("clk: vc5: fix output disabling when
enabling a FOD") for the Renesas 5P49V6901 chip too in order to remove the
ports implicit inter-dependency.
Fixes: dbf6b16f5683 ("clk: vc5: Add support for IDT VersaClock 5P49V6901")
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Link: https://lore.kernel.org/r/20220929225402.9696-2-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ian Nam <young.kwan.nam@xilinx.com>
Date: Tue May 10 12:31:54 2022 +0530
clk: zynqmp: Fix stack-out-of-bounds in strncpy`
[ Upstream commit dd80fb2dbf1cd8751efbe4e53e54056f56a9b115 ]
"BUG: KASAN: stack-out-of-bounds in strncpy+0x30/0x68"
Linux-ATF interface is using 16 bytes of SMC payload. In case clock name is
longer than 15 bytes, string terminated NULL character will not be received
by Linux. Add explicit NULL character at last byte to fix issues when clock
name is longer.
This fixes below bug reported by KASAN:
==================================================================
BUG: KASAN: stack-out-of-bounds in strncpy+0x30/0x68
Read of size 1 at addr ffff0008c89a7410 by task swapper/0/1
CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.4.0-00396-g81ef9e7-dirty #3
Hardware name: Xilinx Versal vck190 Eval board revA (QSPI) (DT)
Call trace:
dump_backtrace+0x0/0x1e8
show_stack+0x14/0x20
dump_stack+0xd4/0x108
print_address_description.isra.0+0xbc/0x37c
__kasan_report+0x144/0x198
kasan_report+0xc/0x18
__asan_load1+0x5c/0x68
strncpy+0x30/0x68
zynqmp_clock_probe+0x238/0x7b8
platform_drv_probe+0x6c/0xc8
really_probe+0x14c/0x418
driver_probe_device+0x74/0x130
__device_attach_driver+0xc4/0xe8
bus_for_each_drv+0xec/0x150
__device_attach+0x160/0x1d8
device_initial_probe+0x10/0x18
bus_probe_device+0xe0/0xf0
device_add+0x528/0x950
of_device_add+0x5c/0x80
of_platform_device_create_pdata+0x120/0x168
of_platform_bus_create+0x244/0x4e0
of_platform_populate+0x50/0xe8
zynqmp_firmware_probe+0x370/0x3a8
platform_drv_probe+0x6c/0xc8
really_probe+0x14c/0x418
driver_probe_device+0x74/0x130
device_driver_attach+0x94/0xa0
__driver_attach+0x70/0x108
bus_for_each_dev+0xe4/0x158
driver_attach+0x30/0x40
bus_add_driver+0x21c/0x2b8
driver_register+0xbc/0x1d0
__platform_driver_register+0x7c/0x88
zynqmp_firmware_driver_init+0x1c/0x24
do_one_initcall+0xa4/0x234
kernel_init_freeable+0x1b0/0x24c
kernel_init+0x10/0x110
ret_from_fork+0x10/0x18
The buggy address belongs to the page:
page:ffff0008f9be1c88 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0
raw: 0008d00000000000 ffff0008f9be1c90 ffff0008f9be1c90 0000000000000000
raw: 0000000000000000 0000000000000000 00000000ffffffff
page dumped because: kasan: bad access detected
addr ffff0008c89a7410 is located in stack of task swapper/0/1 at offset 112 in frame:
zynqmp_clock_probe+0x0/0x7b8
this frame has 3 objects:
[32, 44) 'response'
[64, 80) 'ret_payload'
[96, 112) 'name'
Memory state around the buggy address:
ffff0008c89a7300: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff0008c89a7380: 00 00 00 00 f1 f1 f1 f1 00 04 f2 f2 00 00 f2 f2
>ffff0008c89a7400: 00 00 f3 f3 00 00 00 00 00 00 00 00 00 00 00 00
^
ffff0008c89a7480: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff0008c89a7500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
==================================================================
Signed-off-by: Ian Nam <young.kwan.nam@xilinx.com>
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Link: https://lore.kernel.org/r/20220510070154.29528-3-shubhrajyoti.datta@xilinx.com
Acked-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Quanyang Wang <quanyang.wang@windriver.com>
Date: Fri Aug 26 22:20:30 2022 +0800
clk: zynqmp: pll: rectify rate rounding in zynqmp_pll_round_rate
[ Upstream commit 30eaf02149ecc3c5815e45d27187bf09e925071d ]
The function zynqmp_pll_round_rate is used to find a most appropriate
PLL frequency which the hardware can generate according to the desired
frequency. For example, if the desired frequency is 297MHz, considering
the limited range from PS_PLL_VCO_MIN (1.5GHz) to PS_PLL_VCO_MAX (3.0GHz)
of PLL, zynqmp_pll_round_rate should return 1.872GHz (297MHz * 5).
There are two problems with the current code of zynqmp_pll_round_rate:
1) When the rate is below PS_PLL_VCO_MIN, it can't find a correct rate
when the parameter "rate" is an integer multiple of *prate, in other words,
if "f" is zero, zynqmp_pll_round_rate won't return a valid frequency which
is from PS_PLL_VCO_MIN to PS_PLL_VCO_MAX. For example, *prate is 33MHz
and the rate is 660MHz, zynqmp_pll_round_rate will not boost up rate and
just return 660MHz, and this will cause clk_calc_new_rates failure since
zynqmp_pll_round_rate returns an invalid rate out of its boundaries.
2) Even if the rate is higher than PS_PLL_VCO_MIN, there is still a risk
that zynqmp_pll_round_rate returns an invalid rate because the function
DIV_ROUND_CLOSEST makes some loss in the fractional part. If the parent
clock *prate is 33333333Hz and we want to set the PLL rate to 1.5GHz,
this function will return 1499999985Hz by using the formula below:
value = *prate * DIV_ROUND_CLOSEST(rate, *prate)).
This value is also invalid since it's slightly smaller than PS_PLL_VCO_MIN.
because DIV_ROUND_CLOSEST makes some loss in the fractional part.
Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Link: https://lore.kernel.org/r/20220826142030.213805-1-quanyang.wang@windriver.com
Reviewed-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Doug Smythies <dsmythies@telus.net>
Date: Tue Sep 6 13:28:57 2022 -0700
cpufreq: intel_pstate: Add Tigerlake support in no-HWP mode
[ Upstream commit 71bb5c82aaaea007167f3ba68d3a669c74d7d55d ]
Users may disable HWP in firmware, in which case intel_pstate wouldn't load
unless the CPU model is explicitly supported.
Add TIGERLAKE to the list of CPUs that can register intel_pstate while not
advertising the HWP capability. Without this change, an TIGERLAKE in no-HWP
mode could only use the acpi_cpufreq frequency scaling driver.
See also commits:
d8de7a44e11f: cpufreq: intel_pstate: Add Skylake servers support
fbdc21e9b038: cpufreq: intel_pstate: Add Icelake servers support in no-HWP mode
706c5328851d: cpufreq: intel_pstate: Add Cometlake support in no-HWP mode
Reported by: M. Cargi Ari <cagriari@pm.me>
Signed-off-by: Doug Smythies <dsmythies@telus.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ignat Korchagin <ignat@cloudflare.com>
Date: Wed Aug 31 19:37:06 2022 +0100
crypto: akcipher - default implementation for setting a private key
[ Upstream commit bc155c6c188c2f0c5749993b1405673d25a80389 ]
Changes from v1:
* removed the default implementation from set_pub_key: it is assumed that
an implementation must always have this callback defined as there are
no use case for an algorithm, which doesn't need a public key
Many akcipher implementations (like ECDSA) support only signature
verifications, so they don't have all callbacks defined.
Commit 78a0324f4a53 ("crypto: akcipher - default implementations for
request callbacks") introduced default callbacks for sign/verify
operations, which just return an error code.
However, these are not enough, because before calling sign the caller would
likely call set_priv_key first on the instantiated transform (as the
in-kernel testmgr does). This function does not have a default stub, so the
kernel crashes, when trying to set a private key on an akcipher, which
doesn't support signature generation.
I've noticed this, when trying to add a KAT vector for ECDSA signature to
the testmgr.
With this patch the testmgr returns an error in dmesg (as it should)
instead of crashing the kernel NULL ptr dereference.
Fixes: 78a0324f4a53 ("crypto: akcipher - default implementations for request callbacks")
Signed-off-by: Ignat Korchagin <ignat@cloudflare.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dan Carpenter <error27@gmail.com>
Date: Mon Sep 19 09:43:27 2022 +0300
crypto: cavium - prevent integer overflow loading firmware
[ Upstream commit 2526d6bf27d15054bb0778b2f7bc6625fd934905 ]
The "code_length" value comes from the firmware file. If your firmware
is untrusted realistically there is probably very little you can do to
protect yourself. Still we try to limit the damage as much as possible.
Also Smatch marks any data read from the filesystem as untrusted and
prints warnings if it not capped correctly.
The "ntohl(ucode->code_length) * 2" multiplication can have an
integer overflow.
Fixes: 9e2c7d99941d ("crypto: cavium - Add Support for Octeon-tx CPT Engine")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Koba Ko <koba.ko@canonical.com>
Date: Thu Sep 1 22:47:12 2022 +0800
crypto: ccp - Release dma channels before dmaengine unrgister
[ Upstream commit 68dbe80f5b510c66c800b9e8055235c5b07e37d1 ]
A warning is shown during shutdown,
__dma_async_device_channel_unregister called while 2 clients hold a reference
WARNING: CPU: 15 PID: 1 at drivers/dma/dmaengine.c:1110 __dma_async_device_channel_unregister+0xb7/0xc0
Call dma_release_channel for occupied channles before dma_async_device_unregister.
Fixes: 54cce8ecb925 ("crypto: ccp - ccp_dmaengine_unregister release dma channels")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Koba Ko <koba.ko@canonical.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Weili Qian <qianweili@huawei.com>
Date: Sat Aug 27 18:27:37 2022 +0800
crypto: hisilicon/qm - fix missing put dfx access
[ Upstream commit 5afc904f443de2afd31c4e0686ba178beede86fe ]
In function qm_cmd_write(), if function returns from
branch 'atomic_read(&qm->status.flags) == QM_STOP',
the got dfx access is forgotten to put.
Fixes: 607c191b371d ("crypto: hisilicon - support runtime PM for accelerator device")
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ye Weihua <yeweihua4@huawei.com>
Date: Thu Jul 28 10:07:58 2022 +0800
crypto: hisilicon/zip - fix mismatch in get/set sgl_sge_nr
[ Upstream commit d74f9340097a881869c4c22ca376654cc2516ecc ]
KASAN reported this Bug:
[17619.659757] BUG: KASAN: global-out-of-bounds in param_get_int+0x34/0x60
[17619.673193] Read of size 4 at addr fffff01332d7ed00 by task read_all/1507958
...
[17619.698934] The buggy address belongs to the variable:
[17619.708371] sgl_sge_nr+0x0/0xffffffffffffa300 [hisi_zip]
There is a mismatch in hisi_zip when get/set the variable sgl_sge_nr.
The type of sgl_sge_nr is u16, and get/set sgl_sge_nr by
param_get/set_int.
Replacing param_get/set_int to param_get/set_ushort can fix this bug.
Fixes: f081fda293ffb ("crypto: hisilicon - add sgl_sge_nr module param for zip")
Signed-off-by: Ye Weihua <yeweihua4@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Peter Harliman Liem <pliem@maxlinear.com>
Date: Tue Sep 6 10:51:28 2022 +0800
crypto: inside-secure - Change swab to swab32
[ Upstream commit 664593407e936b6438fbfaaf98876910fd31cf9a ]
The use of swab() is causing failures in 64-bit arch, as it
translates to __swab64() instead of the intended __swab32().
It eventually causes wrong results in xcbcmac & cmac algo.
Fixes: 78cf1c8bfcb8 ("crypto: inside-secure - Move ipad/opad into safexcel_context")
Signed-off-by: Peter Harliman Liem <pliem@maxlinear.com>
Acked-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dan Carpenter <error27@gmail.com>
Date: Mon Sep 19 09:43:19 2022 +0300
crypto: marvell/octeontx - prevent integer overflows
[ Upstream commit caca37cf6c749ff0303f68418cfe7b757a4e0697 ]
The "code_length" value comes from the firmware file. If your firmware
is untrusted realistically there is probably very little you can do to
protect yourself. Still we try to limit the damage as much as possible.
Also Smatch marks any data read from the filesystem as untrusted and
prints warnings if it not capped correctly.
The "code_length * 2" can overflow. The round_up(ucode_size, 16) +
sizeof() expression can overflow too. Prevent these overflows.
Fixes: d9110b0b01ff ("crypto: marvell - add support for OCTEON TX CPT engine")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Lucas Segarra Fernandez <lucas.segarra.fernandez@intel.com>
Date: Thu Aug 25 12:32:16 2022 +0200
crypto: qat - fix default value of WDT timer
[ Upstream commit cc40b04c08400d86d2d6ea0159e0617e717f729c ]
The QAT HW supports an hardware mechanism to detect an accelerator hang.
The reporting of a hang occurs after a watchdog timer (WDT) expires.
The value of the WDT set previously was too small and was causing false
positives.
Change the default value of the WDT to 0x7000000ULL to avoid this.
Fixes: 1c4d9d5bbb5a ("crypto: qat - enable detection of accelerators hang")
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Lucas Segarra Fernandez <lucas.segarra.fernandez@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Damian Muszynski <damian.muszynski@intel.com>
Date: Fri Sep 9 11:49:12 2022 +0100
crypto: qat - fix DMA transfer direction
[ Upstream commit cf5bb835b7c8a5fee7f26455099cca7feb57f5e9 ]
When CONFIG_DMA_API_DEBUG is selected, while running the crypto self
test on the QAT crypto algorithms, the function add_dma_entry() reports
a warning similar to the one below, saying that overlapping mappings
are not supported. This occurs in tests where the input and the output
scatter list point to the same buffers (i.e. two different scatter lists
which point to the same chunks of memory).
The logic that implements the mapping uses the flag DMA_BIDIRECTIONAL
for both the input and the output scatter lists which leads to
overlapped write mappings. These are not supported by the DMA layer.
Fix by specifying the correct DMA transfer directions when mapping
buffers. For in-place operations where the input scatter list
matches the output scatter list, buffers are mapped once with
DMA_BIDIRECTIONAL, otherwise input buffers are mapped using the flag
DMA_TO_DEVICE and output buffers are mapped with DMA_FROM_DEVICE.
Overlapping a read mapping with a write mapping is a valid case in
dma-coherent devices like QAT.
The function that frees and unmaps the buffers, qat_alg_free_bufl()
has been changed accordingly to the changes to the mapping function.
DMA-API: 4xxx 0000:06:00.0: cacheline tracking EEXIST, overlapping mappings aren't supported
WARNING: CPU: 53 PID: 4362 at kernel/dma/debug.c:570 add_dma_entry+0x1e9/0x270
...
Call Trace:
dma_map_page_attrs+0x82/0x2d0
? preempt_count_add+0x6a/0xa0
qat_alg_sgl_to_bufl+0x45b/0x990 [intel_qat]
qat_alg_aead_dec+0x71/0x250 [intel_qat]
crypto_aead_decrypt+0x3d/0x70
test_aead_vec_cfg+0x649/0x810
? number+0x310/0x3a0
? vsnprintf+0x2a3/0x550
? scnprintf+0x42/0x70
? valid_sg_divisions.constprop.0+0x86/0xa0
? test_aead_vec+0xdf/0x120
test_aead_vec+0xdf/0x120
alg_test_aead+0x185/0x400
alg_test+0x3d8/0x500
? crypto_acomp_scomp_free_ctx+0x30/0x30
? __schedule+0x32a/0x12a0
? ttwu_queue_wakelist+0xbf/0x110
? _raw_spin_unlock_irqrestore+0x23/0x40
? try_to_wake_up+0x83/0x570
? _raw_spin_unlock_irqrestore+0x23/0x40
? __set_cpus_allowed_ptr_locked+0xea/0x1b0
? crypto_acomp_scomp_free_ctx+0x30/0x30
cryptomgr_test+0x27/0x50
kthread+0xe6/0x110
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x1f/0x30
Fixes: d370cec ("crypto: qat - Intel(R) QAT crypto interface")
Link: https://lore.kernel.org/linux-crypto/20220223080400.139367-1-gilad@benyossef.com/
Signed-off-by: Damian Muszynski <damian.muszynski@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Zhengchao Shao <shaozhengchao@huawei.com>
Date: Mon Jul 25 12:09:28 2022 +0800
crypto: sahara - don't sleep when in softirq
[ Upstream commit 108586eba094b318e6a831f977f4ddcc403a15da ]
Function of sahara_aes_crypt maybe could be called by function
of crypto_skcipher_encrypt during the rx softirq, so it is not
allowed to use mutex lock.
Fixes: c0c3c89ae347 ("crypto: sahara - replace tasklets with...")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jie Hai <haijie1@huawei.com>
Date: Tue Aug 30 14:22:47 2022 +0800
dmaengine: hisilicon: Add multi-thread support for a DMA channel
[ Upstream commit 2cbb95883c990d0002a77e13d3278913ab26ad79 ]
When we get a DMA channel and try to use it in multiple threads it
will cause oops and hanging the system.
% echo 100 > /sys/module/dmatest/parameters/threads_per_chan
% echo 100 > /sys/module/dmatest/parameters/iterations
% echo 1 > /sys/module/dmatest/parameters/run
[383493.327077] Unable to handle kernel paging request at virtual
address dead000000000108
[383493.335103] Mem abort info:
[383493.335103] ESR = 0x96000044
[383493.335105] EC = 0x25: DABT (current EL), IL = 32 bits
[383493.335107] SET = 0, FnV = 0
[383493.335108] EA = 0, S1PTW = 0
[383493.335109] FSC = 0x04: level 0 translation fault
[383493.335110] Data abort info:
[383493.335111] ISV = 0, ISS = 0x00000044
[383493.364739] CM = 0, WnR = 1
[383493.367793] [dead000000000108] address between user and kernel
address ranges
[383493.375021] Internal error: Oops: 96000044 [#1] PREEMPT SMP
[383493.437574] CPU: 63 PID: 27895 Comm: dma0chan0-copy2 Kdump:
loaded Tainted: GO 5.17.0-rc4+ #2
[383493.457851] pstate: 204000c9 (nzCv daIF +PAN -UAO -TCO -DIT
-SSBS BTYPE=--)
[383493.465331] pc : vchan_tx_submit+0x64/0xa0
[383493.469957] lr : vchan_tx_submit+0x34/0xa0
This occurs because the transmission timed out, and that's due
to data race. Each thread rewrite channels's descriptor as soon as
device_issue_pending is called. It leads to the situation that
the driver thinks that it uses the right descriptor in interrupt
handler while channels's descriptor has been changed by other
thread. The descriptor which in fact reported interrupt will not
be handled any more, as well as its tx->callback.
That's why timeout reports.
With current fixes channels' descriptor changes it's value only
when it has been used. A new descriptor is acquired from
vc->desc_issued queue that is already filled with descriptors
that are ready to be sent. Threads have no direct access to DMA
channel descriptor. In case of channel's descriptor is busy, try
to submit to HW again when a descriptor is completed. In this case,
vc->desc_issued may be empty when hisi_dma_start_transfer is called,
so delete error reporting on this. Now it is just possible to queue
a descriptor for further processing.
Fixes: e9f08b65250d ("dmaengine: hisilicon: Add Kunpeng DMA engine support")
Signed-off-by: Jie Hai <haijie1@huawei.com>
Acked-by: Zhou Wang <wangzhou1@hisilicon.com>
Link: https://lore.kernel.org/r/20220830062251.52993-4-haijie1@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jie Hai <haijie1@huawei.com>
Date: Tue Aug 30 14:22:45 2022 +0800
dmaengine: hisilicon: Disable channels when unregister hisi_dma
[ Upstream commit e3bdaa04ada31f46d0586df83a2789b8913053c5 ]
When hisi_dma is unloaded or unbinded, all of channels should be
disabled. This patch disables DMA channels when driver is unloaded
or unbinded.
Fixes: e9f08b65250d ("dmaengine: hisilicon: Add Kunpeng DMA engine support")
Signed-off-by: Jie Hai <haijie1@huawei.com>
Acked-by: Zhou Wang <wangzhou1@hisilicon.com>
Link: https://lore.kernel.org/r/20220830062251.52993-2-haijie1@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jie Hai <haijie1@huawei.com>
Date: Tue Aug 30 14:22:46 2022 +0800
dmaengine: hisilicon: Fix CQ head update
[ Upstream commit 94477a79cf80e8ab55b68f14bc579a12ddea1e0b ]
After completion of data transfer of one or multiple descriptors,
the completion status and the current head pointer to submission
queue are written into the CQ and interrupt can be generated to
inform the software. In interrupt process CQ is read and cq_head
is updated.
hisi_dma_irq updates cq_head only when the completion status is
success. When an abnormal interrupt reports, cq_head will not update
which will cause subsequent interrupt processes read the error CQ
and never report the correct status.
This patch updates cq_head whenever CQ is accessed.
Fixes: e9f08b65250d ("dmaengine: hisilicon: Add Kunpeng DMA engine support")
Signed-off-by: Jie Hai <haijie1@huawei.com>
Acked-by: Zhou Wang <wangzhou1@hisilicon.com>
Link: https://lore.kernel.org/r/20220830062251.52993-3-haijie1@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dave Jiang <dave.jiang@intel.com>
Date: Mon Sep 19 09:58:42 2022 -0700
dmaengine: ioat: stop mod_timer from resurrecting deleted timer in __cleanup()
[ Upstream commit 898ec89dbb55b8294695ad71694a0684e62b2a73 ]
User reports observing timer event report channel halted but no error
observed in CHANERR register. The driver finished self-test and released
channel resources. Debug shows that __cleanup() can call
mod_timer() after the timer has been deleted and thus resurrect the
timer. While harmless, it causes suprious error message to be emitted.
Use mod_timer_pending() call to prevent deleted timer from being
resurrected.
Fixes: 3372de5813e4 ("dmaengine: ioatdma: removal of dma_v3.c and relevant ioat3 references")
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/166360672197.3851724.17040290563764838369.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Date: Wed Sep 21 19:05:56 2022 +0200
dmaengine: mxs: use platform_driver_register
commit 26696d4657167112a1079f86cba1739765c1360e upstream.
Driver registration fails on SOC imx8mn as its supplier, the clock
control module, is probed later than subsys initcall level. This driver
uses platform_driver_probe which is not compatible with deferred probing
and won't be probed again later if probe function fails due to clock not
being available at that time.
This patch replaces the use of platform_driver_probe with
platform_driver_register which will allow probing the driver later again
when the clock control module will be available.
The __init annotation has been dropped because it is not compatible with
deferred probing. The code is not executed once and its memory cannot be
freed.
Fixes: a580b8c5429a ("dmaengine: mxs-dma: add dma support for i.MX23/28")
Co-developed-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220921170556.1055962-1-dario.binacchi@amarulasolutions.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Author: Vaishnav Achath <vaishnav.a@ti.com>
Date: Tue Aug 2 11:18:35 2022 +0530
dmaengine: ti: k3-udma: Reset UDMA_CHAN_RT byte counters to prevent overflow
[ Upstream commit 7c94dcfa8fcff2dba53915f1dabfee49a3df8b88 ]
UDMA_CHAN_RT_*BCNT_REG stores the real-time channel bytecount statistics.
These registers are 32-bit hardware counters and the driver uses these
counters to monitor the operational progress status for a channel, when
transferring more than 4GB of data it was observed that these counters
overflow and completion calculation of a operation gets affected and the
transfer hangs indefinitely.
This commit adds changes to decrease the byte count for every complete
transaction so that these registers never overflow and the proper byte
count statistics is maintained for ongoing transaction by the RT counters.
Earlier uc->bcnt used to maintain a count of the completed bytes at driver
side, since the RT counters maintain the statistics of current transaction
now, the maintenance of uc->bcnt is not necessary.
Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20220802054835.19482-1-vaishnav.a@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dan Carpenter <error27@gmail.com>
Date: Thu Sep 22 14:22:47 2022 +0300
drivers: serial: jsm: fix some leaks in probe
[ Upstream commit 1d5859ef229e381f4db38dce8ed58e4bf862006b ]
This error path needs to unwind instead of just returning directly.
Fixes: 03a8482c17dd ("drivers: serial: jsm: Enable support for Digi Classic adapters")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/YyxFh1+lOeZ9WfKO@kili
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Nathan Chancellor <nathan@kernel.org>
Date: Fri Oct 14 08:21:03 2022 -0700
drm/amd/display: Fix build breakage with CONFIG_DEBUG_FS=n
commit 2130b87b2273389cafe6765bf09ef564cda01407 upstream.
After commit 8799c0be89eb ("drm/amd/display: Fix vblank refcount in vrr
transition"), a build with CONFIG_DEBUG_FS=n is broken due to a
misplaced brace, along the lines of:
In file included from drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_trace.h:39,
from drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:41:
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c: At top level:
./include/drm/drm_atomic.h:864:9: error: expected identifier or ‘(’ before ‘for’
864 | for ((__i) = 0; \
| ^~~
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:8317:9: note: in expansion of macro ‘for_each_new_crtc_in_state’
8317 | for_each_new_crtc_in_state(state, crtc, new_crtc_state, j)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
Move the brace within the #ifdef so that the file can be built with or
without CONFIG_DEBUG_FS.
Fixes: 8799c0be89eb ("drm/amd/display: Fix vblank refcount in vrr transition")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: David Gow <davidgow@google.com>
Date: Thu Aug 11 17:43:26 2022 -0300
drm/amd/display: fix overflow on MIN_I64 definition
[ Upstream commit 6ae0632d17759852c07e2d1e0a31c728eb6ba246 ]
The definition of MIN_I64 in bw_fixed.c can cause gcc to whinge about
integer overflow, because it is treated as a positive value, which is
then negated. The temporary positive value is not necessarily
representable.
This causes the following warning:
../drivers/gpu/drm/amd/amdgpu/../display/dc/dml/calcs/bw_fixed.c:30:19:
warning: integer overflow in expression ‘-9223372036854775808’ of type
‘long long int’ results in ‘-9223372036854775808’ [-Woverflow]
30 | (int64_t)(-(1LL << 63))
| ^
Writing out (-MAX_I64 - 1) works instead.
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Tales Aparecida <tales.aparecida@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Yunxiang Li <Yunxiang.Li@amd.com>
Date: Wed Sep 21 17:20:19 2022 -0400
drm/amd/display: Fix vblank refcount in vrr transition
commit 8799c0be89ebb99a16098bdf618f49f817bef76a upstream.
manage_dm_interrupts disable/enable vblank using drm_crtc_vblank_off/on
which causes drm_crtc_vblank_get in vrr_transition to fail, and later
when drm_crtc_vblank_put is called the refcount on vblank will be messed
up. Therefore move the call to after manage_dm_interrupts.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1247
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1380
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Aric Cyr <aric.cyr@amd.com>
Date: Fri Sep 9 18:07:59 2022 -0400
drm/amd/display: Remove interface for periodic interrupt 1
[ Upstream commit 97d8d6f075bd8f988589be02b91f6fa644d0b0b8 ]
[why]
Only a single VLINE interrupt is available so interface should not
expose the second one which is used by DMU firmware.
[how]
Remove references to periodic_interrupt1 and VLINE1 from DC interfaces.
Reviewed-by: Jaehyun Chung <jaehyun.chung@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Yang Yingliang <yangyingliang@huawei.com>
Date: Fri Aug 26 16:57:54 2022 +0800
drm/amdgpu: add missing pci_disable_device() in amdgpu_pmops_runtime_resume()
[ Upstream commit 6b11af6d1c8f5d4135332bb932baaa06e511173d ]
Add missing pci_disable_device() if amdgpu_device_resume() fails.
Fixes: 8e4d5d43cc6c ("drm/amdgpu: Handling of amdgpu_device_resume return value for graceful teardown")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: hongao <hongao@uniontech.com>
Date: Tue Sep 20 17:24:53 2022 +0800
drm/amdgpu: fix initial connector audio value
[ Upstream commit 4bb71fce58f30df3f251118291d6b0187ce531e6 ]
This got lost somewhere along the way, This fixes
audio not working until set_property was called.
Signed-off-by: hongao <hongao@uniontech.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Rafael Mendonca <rafaelmendsr@gmail.com>
Date: Mon Sep 12 19:34:32 2022 -0300
drm/amdgpu: Fix memory leak in hpd_rx_irq_create_workqueue()
[ Upstream commit 7136f956c73c4ba50bfeb61653dfd6a9669ea915 ]
If construction of the array of work queues to handle hpd_rx_irq offload
work fails, we need to unwind. Destroy all the created workqueues and
the allocated memory for the hpd_rx_irq_offload_work_queue struct array.
Fixes: 8e794421bc98 ("drm/amd/display: Fork thread to offload work of hpd_rx_irq")
Signed-off-by: Rafael Mendonca <rafaelmendsr@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Gerd Hoffmann <kraxel@redhat.com>
Date: Tue Sep 6 16:29:57 2022 +0200
drm/bochs: fix blanking
[ Upstream commit e740ceb53e4579a7a4063712cebecac3c343b189 ]
VGA_IS1_RC is the color mode register (VGA_IS1_RM the one for monochrome
mode, note C vs. M at the end). So when using VGA_IS1_RC make sure the
vga device is actually in color mode and set the corresponding bit in the
misc register.
Reproducible when booting VMs in UEFI mode with some edk2 versions (edk2
fix is on the way too). Doesn't happen in BIOS mode because in that
case the vgabios already flips the bit.
Fixes: 250e743915d4 ("drm/bochs: Add screen blanking support")
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20220906142957.2763577-1-kraxel@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dan Carpenter <error27@gmail.com>
Date: Mon Jul 4 13:55:40 2022 +0300
drm/bridge: Avoid uninitialized variable warning
[ Upstream commit 7d1202738efda60155d98b370b3c70d336be0eea ]
This code works, but technically it uses "num_in_bus_fmts" before it
has been initialized so it leads to static checker warnings and probably
KMEMsan warnings at run time. Initialize the variable to zero to
silence the warning.
Fixes: f32df58acc68 ("drm/bridge: Add the necessary bits to support bus format negotiation")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/YrrIs3hoGcPVmXc5@kili
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Zheyu Ma <zheyuma97@gmail.com>
Date: Tue Aug 30 15:34:50 2022 +0800
drm/bridge: megachips: Fix a null pointer dereference bug
[ Upstream commit 1ff673333d46d2c1b053ebd0c1c7c7c79e36943e ]
When removing the module we will get the following warning:
[ 31.911505] i2c-core: driver [stdp2690-ge-b850v3-fw] unregistered
[ 31.912484] general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN PTI
[ 31.913338] KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
[ 31.915280] RIP: 0010:drm_bridge_remove+0x97/0x130
[ 31.921825] Call Trace:
[ 31.922533] stdp4028_ge_b850v3_fw_remove+0x34/0x60 [megachips_stdpxxxx_ge_b850v3_fw]
[ 31.923139] i2c_device_remove+0x181/0x1f0
The two bridges (stdp2690, stdp4028) do not probe at the same time, so
the driver does not call ge_b850v3_resgiter() when probing, causing the
driver to try to remove the object that has not been initialized.
Fix this by checking whether both the bridges are probed.
Fixes: 11632d4aa2b3 ("drm/bridge: megachips: Ensure both bridges are probed before registration")
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220830073450.1897020-1-zheyuma97@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Chen-Yu Tsai <wenst@chromium.org>
Date: Thu Jul 21 17:22:58 2022 +0800
drm/bridge: parade-ps8640: Fix regulator supply order
[ Upstream commit fc94224c2e0ae8d83ac511a3ef4962178505469d ]
The datasheet says that VDD12 must be enabled and at full voltage before
VDD33 is enabled.
Reorder the bulk regulator supply names so that VDD12 is enabled before
VDD33. Any enable ramp delays should be handled by setting proper
constraints on the regulators.
Fixes: bc1aee7fc8f0 ("drm/bridge: Add I2C based driver for ps8640 bridge")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220721092258.3397461-1-wenst@chromium.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Khaled Almahallawy <khaled.almahallawy@intel.com>
Date: Thu Sep 15 22:49:00 2022 -0700
drm/dp: Don't rewrite link config when setting phy test pattern
[ Upstream commit 7b4d8db657192066bc6f1f6635d348413dac1e18 ]
The sequence for Source DP PHY CTS automation is [2][1]:
1- Emulate successful Link Training(LT)
2- Short HPD and change link rates and number of lanes by LT.
(This is same flow for Link Layer CTS)
3- Short HPD and change PHY test pattern and swing/pre-emphasis
levels (This step should not trigger LT)
The problem is with DP PHY compliance setup as follow:
[DPTX + on board LTTPR]------Main Link--->[Scope]
^ |
| |
| |
----------Aux Ch------>[Aux Emulator]
At step 3, before writing TRAINING_LANEx_SET/LINK_QUAL_PATTERN_SET
to declare the pattern/swing requested by scope, we write link
config in LINK_BW_SET/LANE_COUNT_SET on a port that has LTTPR.
As LTTPR snoops aux transaction, LINK_BW_SET/LANE_COUNT_SET writes
indicate a LT will start [Check DP 2.0 E11 -Sec 3.6.8.2 & 3.6.8.6.3],
and LTTPR will reset the link and stop sending DP signals to
DPTX/Scope causing the measurements to fail. Note that step 3 will
not trigger LT and DP link will never recovered by the
Aux Emulator/Scope.
The reset of link can be tested with a monitor connected to LTTPR
port simply by writing to LINK_BW_SET or LANE_COUNT_SET as follow
igt/tools/dpcd_reg write --offset=0x100 --value 0x14 --device=2
OR
printf '\x14' | sudo dd of=/dev/drm_dp_aux2 bs=1 count=1 conv=notrunc
seek=$((0x100))
This single aux write causes the screen to blank, sending short HPD to
DPTX, setting LINK_STATUS_UPDATE = 1 in DPCD 0x204, and triggering LT.
As stated in [1]:
"Before any TX electrical testing can be performed, the link between a
DPTX and DPRX (in this case, a piece of test equipment), including all
LTTPRs within the path, shall be trained as defined in this Standard."
In addition, changing Phy pattern/Swing/Pre-emphasis (Step 3) uses the
same link rate and lane count applied on step 2, so no need to redo LT.
The fix is to not rewrite link config in step 3, and just writes
TRAINING_LANEx_SET and LINK_QUAL_PATTERN_SET
[1]: DP 2.0 E11 - 3.6.11.1 LTTPR DPTX_PHY Electrical Compliance
[2]: Configuring UnigrafDPTC Controller - Automation Test Sequence
https://www.keysight.com/us/en/assets/9922-01244/help-files/
D9040DPPC-DisplayPort-Test-Software-Online-Help-latest.chm
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Or Cochvi <or.cochvi@intel.com>
Signed-off-by: Khaled Almahallawy <khaled.almahallawy@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220916054900.415804-1-khaled.almahallawy@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Simon Ser <contact@emersion.fr>
Date: Thu Feb 10 15:40:25 2022 +0000
drm/dp_mst: fix drm_dp_dpcd_read return value checks
[ Upstream commit 2ac6cdd581f48c8f68747156fde5868486a44985 ]
drm_dp_dpcd_read returns the number of bytes read. The previous code
would print garbage on DPCD error, and would exit with on error on
success.
Signed-off-by: Simon Ser <contact@emersion.fr>
Fixes: cb897542c6d2 ("drm/dp_mst: Fix W=1 warnings")
Cc: Lyude Paul <lyude@redhat.com>
Cc: Benjamin Gaignard <benjamin.gaignard@st.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/473500/
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
Date: Mon Oct 3 14:15:41 2022 +0300
drm/i915: Fix watermark calculations for gen12+ CCS+CC modifier
commit 070a2855900de17b1e11a0dc35af9794e80f1a28 upstream.
Take the gen12+ CCS+CC modifier into account when calculating the
watermarks. Othwerwise we'll calculate the watermarks thinking this
Y-tiled modifier is linear.
The rc_surface part is actually a nop since that is not used
for any glk+ platform.
Cc: stable@vger.kernel.org
Fixes: d1e2775e9b96 ("drm/i915/tgl: Add Clear Color support for TGL Render Decompression")
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221003111544.8007-4-ville.syrjala@linux.intel.com
(cherry picked from commit a627455bbe50a111475d7a42beb58fa64bd96c83)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
Date: Mon Oct 3 14:15:40 2022 +0300
drm/i915: Fix watermark calculations for gen12+ MC CCS modifier
commit 484b2b9281000274ef7c5cb0a9ebc5da6f5c281c upstream.
Take the gen12+ MC CCS modifier into account when calculating the
watermarks. Othwerwise we'll calculate the watermarks thinking this
Y-tiled modifier is linear.
The rc_surface part is actually a nop since that is not used
for any glk+ platform.
v2: Split RC CCS vs. MC CCS to separate patches
Cc: stable@vger.kernel.org
Fixes: 2dfbf9d2873a ("drm/i915/tgl: Gen-12 display can decompress surfaces compressed by the media engine")
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221003111544.8007-3-ville.syrjala@linux.intel.com
(cherry picked from commit 91c9651425fe955b1387f3637607dda005f3f710)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
Date: Mon Oct 3 14:15:39 2022 +0300
drm/i915: Fix watermark calculations for gen12+ RC CCS modifier
commit c56453a00f19ccddee302f5f9fe96b80e0b47fd3 upstream.
Take the gen12+ RC CCS modifier into account when calculating the
watermarks. Othwerwise we'll calculate the watermarks thinking this
Y-tiled modifier is linear.
The rc_surface part is actually a nop since that is not used
for any glk+ platform.
v2: Split RC CCS vs. MC CCS to separate patches
Cc: stable@vger.kernel.org
Fixes: b3e57bccd68a ("drm/i915/tgl: Gen-12 render decompression")
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221003111544.8007-2-ville.syrjala@linux.intel.com
(cherry picked from commit a89a96a586114f67598c6391c75678b4dba5c2da)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Liviu Dudau <liviu.dudau@arm.com>
Date: Fri Jul 8 16:39:21 2022 +0100
drm/komeda: Fix handling of atomic commits in the atomic_commit_tail hook
[ Upstream commit eaa225b6b52233d45457fd33730e1528c604d92d ]
Komeda driver relies on the generic DRM atomic helper functions to handle
commits. It only implements an atomic_commit_tail hook for the
mode_config_helper_funcs and even that one is pretty close to the generic
implementation with the exception of additional dma_fence signalling.
What the generic helper framework doesn't do is waiting for the actual
hardware to signal that the commit parameters have been written into the
appropriate registers. As we signal CRTC events only on the irq handlers,
we need to flush the configuration and wait for the hardware to respond.
Add the Komeda specific implementation for atomic_commit_hw_done() that
flushes and waits for flip done before calling drm_atomic_helper_commit_hw_done().
The fix was prompted by a patch from Carsten Haitzler where he was trying to
solve the same issue but in a different way that I think can lead to wrong
event signaling to userspace.
Reported-by: Carsten Haitzler <carsten.haitzler@arm.com>
Tested-by: Carsten Haitzler <carsten.haitzler@arm.com>
Reviewed-by: Carsten Haitzler <carsten.haitzler@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220722122139.288486-1-liviu.dudau@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Adrián Larumbe <adrian.larumbe@collabora.com>
Date: Mon Sep 19 02:09:39 2022 +0100
drm/meson: explicitly remove aggregate driver at module unload time
[ Upstream commit 8616f2a0589a80e08434212324250eb22f6a66ce ]
Because component_master_del wasn't being called when unloading the
meson_drm module, the aggregate device would linger forever in the global
aggregate_devices list. That means when unloading and reloading the
meson_dw_hdmi module, component_add would call into
try_to_bring_up_aggregate_device and find the unbound meson_drm aggregate
device.
This would in turn dereference some of the aggregate_device's struct
entries which point to memory automatically freed by the devres API when
unbinding the aggregate device from meson_drv_unbind, and trigger an
use-after-free bug:
[ +0.000014] =============================================================
[ +0.000007] BUG: KASAN: use-after-free in find_components+0x468/0x500
[ +0.000017] Read of size 8 at addr ffff000006731688 by task modprobe/2536
[ +0.000018] CPU: 4 PID: 2536 Comm: modprobe Tainted: G C O 5.19.0-rc6-lrmbkasan+ #1
[ +0.000010] Hardware name: Hardkernel ODROID-N2Plus (DT)
[ +0.000008] Call trace:
[ +0.000005] dump_backtrace+0x1ec/0x280
[ +0.000011] show_stack+0x24/0x80
[ +0.000007] dump_stack_lvl+0x98/0xd4
[ +0.000010] print_address_description.constprop.0+0x80/0x520
[ +0.000011] print_report+0x128/0x260
[ +0.000007] kasan_report+0xb8/0xfc
[ +0.000007] __asan_report_load8_noabort+0x3c/0x50
[ +0.000009] find_components+0x468/0x500
[ +0.000008] try_to_bring_up_aggregate_device+0x64/0x390
[ +0.000009] __component_add+0x1dc/0x49c
[ +0.000009] component_add+0x20/0x30
[ +0.000008] meson_dw_hdmi_probe+0x28/0x34 [meson_dw_hdmi]
[ +0.000013] platform_probe+0xd0/0x220
[ +0.000008] really_probe+0x3ac/0xa80
[ +0.000008] __driver_probe_device+0x1f8/0x400
[ +0.000008] driver_probe_device+0x68/0x1b0
[ +0.000008] __driver_attach+0x20c/0x480
[ +0.000009] bus_for_each_dev+0x114/0x1b0
[ +0.000007] driver_attach+0x48/0x64
[ +0.000009] bus_add_driver+0x390/0x564
[ +0.000007] driver_register+0x1a8/0x3e4
[ +0.000009] __platform_driver_register+0x6c/0x94
[ +0.000007] meson_dw_hdmi_platform_driver_init+0x30/0x1000 [meson_dw_hdmi]
[ +0.000014] do_one_initcall+0xc4/0x2b0
[ +0.000008] do_init_module+0x154/0x570
[ +0.000010] load_module+0x1a78/0x1ea4
[ +0.000008] __do_sys_init_module+0x184/0x1cc
[ +0.000008] __arm64_sys_init_module+0x78/0xb0
[ +0.000008] invoke_syscall+0x74/0x260
[ +0.000008] el0_svc_common.constprop.0+0xcc/0x260
[ +0.000009] do_el0_svc+0x50/0x70
[ +0.000008] el0_svc+0x68/0x1a0
[ +0.000009] el0t_64_sync_handler+0x11c/0x150
[ +0.000009] el0t_64_sync+0x18c/0x190
[ +0.000014] Allocated by task 902:
[ +0.000007] kasan_save_stack+0x2c/0x5c
[ +0.000009] __kasan_kmalloc+0x90/0xd0
[ +0.000007] __kmalloc_node+0x240/0x580
[ +0.000010] memcg_alloc_slab_cgroups+0xa4/0x1ac
[ +0.000010] memcg_slab_post_alloc_hook+0xbc/0x4c0
[ +0.000008] kmem_cache_alloc_node+0x1d0/0x490
[ +0.000009] __alloc_skb+0x1d4/0x310
[ +0.000010] alloc_skb_with_frags+0x8c/0x620
[ +0.000008] sock_alloc_send_pskb+0x5ac/0x6d0
[ +0.000010] unix_dgram_sendmsg+0x2e0/0x12f0
[ +0.000010] sock_sendmsg+0xcc/0x110
[ +0.000007] sock_write_iter+0x1d0/0x304
[ +0.000008] new_sync_write+0x364/0x460
[ +0.000007] vfs_write+0x420/0x5ac
[ +0.000008] ksys_write+0x19c/0x1f0
[ +0.000008] __arm64_sys_write+0x78/0xb0
[ +0.000007] invoke_syscall+0x74/0x260
[ +0.000008] el0_svc_common.constprop.0+0x1a8/0x260
[ +0.000009] do_el0_svc+0x50/0x70
[ +0.000007] el0_svc+0x68/0x1a0
[ +0.000008] el0t_64_sync_handler+0x11c/0x150
[ +0.000008] el0t_64_sync+0x18c/0x190
[ +0.000013] Freed by task 2509:
[ +0.000008] kasan_save_stack+0x2c/0x5c
[ +0.000007] kasan_set_track+0x2c/0x40
[ +0.000008] kasan_set_free_info+0x28/0x50
[ +0.000008] ____kasan_slab_free+0x128/0x1d4
[ +0.000008] __kasan_slab_free+0x18/0x24
[ +0.000007] slab_free_freelist_hook+0x108/0x230
[ +0.000010] kfree+0x110/0x35c
[ +0.000008] release_nodes+0xf0/0x16c
[ +0.000008] devres_release_all+0xfc/0x180
[ +0.000008] device_unbind_cleanup+0x24/0x164
[ +0.000008] device_release_driver_internal+0x3e8/0x5b0
[ +0.000010] driver_detach+0xac/0x1b0
[ +0.000008] bus_remove_driver+0x158/0x29c
[ +0.000008] driver_unregister+0x70/0xb0
[ +0.000009] platform_driver_unregister+0x20/0x2c
[ +0.000007] 0xffff800003722d98
[ +0.000012] __do_sys_delete_module+0x288/0x400
[ +0.000009] __arm64_sys_delete_module+0x5c/0x80
[ +0.000008] invoke_syscall+0x74/0x260
[ +0.000008] el0_svc_common.constprop.0+0xcc/0x260
[ +0.000008] do_el0_svc+0x50/0x70
[ +0.000007] el0_svc+0x68/0x1a0
[ +0.000008] el0t_64_sync_handler+0x11c/0x150
[ +0.000009] el0t_64_sync+0x18c/0x190
[ +0.000013] Last potentially related work creation:
[ +0.000007] kasan_save_stack+0x2c/0x5c
[ +0.000007] __kasan_record_aux_stack+0xb8/0xf0
[ +0.000009] kasan_record_aux_stack_noalloc+0x14/0x20
[ +0.000008] insert_work+0x54/0x290
[ +0.000009] __queue_work+0x48c/0xd24
[ +0.000008] queue_work_on+0x90/0x11c
[ +0.000008] call_usermodehelper_exec+0x188/0x404
[ +0.000010] kobject_uevent_env+0x5a8/0x794
[ +0.000010] kobject_uevent+0x14/0x20
[ +0.000008] driver_register+0x230/0x3e4
[ +0.000009] __platform_driver_register+0x6c/0x94
[ +0.000007] gxbb_driver_init+0x28/0x34
[ +0.000010] do_one_initcall+0xc4/0x2b0
[ +0.000008] do_initcalls+0x20c/0x24c
[ +0.000010] kernel_init_freeable+0x22c/0x278
[ +0.000009] kernel_init+0x3c/0x170
[ +0.000008] ret_from_fork+0x10/0x20
[ +0.000013] The buggy address belongs to the object at ffff000006731600
which belongs to the cache kmalloc-256 of size 256
[ +0.000009] The buggy address is located 136 bytes inside of
256-byte region [ffff000006731600, ffff000006731700)
[ +0.000015] The buggy address belongs to the physical page:
[ +0.000008] page:fffffc000019cc00 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff000006730a00 pfn:0x6730
[ +0.000011] head:fffffc000019cc00 order:2 compound_mapcount:0 compound_pincount:0
[ +0.000008] flags: 0xffff00000010200(slab|head|node=0|zone=0|lastcpupid=0xffff)
[ +0.000016] raw: 0ffff00000010200 fffffc00000c3d08 fffffc0000ef2b08 ffff000000002680
[ +0.000009] raw: ffff000006730a00 0000000000150014 00000001ffffffff 0000000000000000
[ +0.000006] page dumped because: kasan: bad access detected
[ +0.000011] Memory state around the buggy address:
[ +0.000007] ffff000006731580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ +0.000007] ffff000006731600: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ +0.000007] >ffff000006731680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ +0.000007] ^
[ +0.000006] ffff000006731700: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ +0.000007] ffff000006731780: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ +0.000006] ==================================================================
Fix by adding 'remove' driver callback for meson-drm, and explicitly deleting the
aggregate device.
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220919010940.419893-3-adrian.larumbe@collabora.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Adrián Larumbe <adrian.larumbe@collabora.com>
Date: Mon Sep 19 02:09:38 2022 +0100
drm/meson: reorder driver deinit sequence to fix use-after-free bug
[ Upstream commit 31c519981eb141c7ec39bfd5be25d35f02edb868 ]
Unloading the driver triggers the following KASAN warning:
[ +0.006275] =============================================================
[ +0.000029] BUG: KASAN: use-after-free in __list_del_entry_valid+0xe0/0x1a0
[ +0.000026] Read of size 8 at addr ffff000020c395e0 by task rmmod/2695
[ +0.000019] CPU: 5 PID: 2695 Comm: rmmod Tainted: G C O 5.19.0-rc6-lrmbkasan+ #1
[ +0.000013] Hardware name: Hardkernel ODROID-N2Plus (DT)
[ +0.000008] Call trace:
[ +0.000007] dump_backtrace+0x1ec/0x280
[ +0.000013] show_stack+0x24/0x80
[ +0.000008] dump_stack_lvl+0x98/0xd4
[ +0.000011] print_address_description.constprop.0+0x80/0x520
[ +0.000011] print_report+0x128/0x260
[ +0.000007] kasan_report+0xb8/0xfc
[ +0.000008] __asan_report_load8_noabort+0x3c/0x50
[ +0.000010] __list_del_entry_valid+0xe0/0x1a0
[ +0.000009] drm_atomic_private_obj_fini+0x30/0x200 [drm]
[ +0.000172] drm_bridge_detach+0x94/0x260 [drm]
[ +0.000145] drm_encoder_cleanup+0xa4/0x290 [drm]
[ +0.000144] drm_mode_config_cleanup+0x118/0x740 [drm]
[ +0.000143] drm_mode_config_init_release+0x1c/0x2c [drm]
[ +0.000144] drm_managed_release+0x170/0x414 [drm]
[ +0.000142] drm_dev_put.part.0+0xc0/0x124 [drm]
[ +0.000143] drm_dev_put+0x20/0x30 [drm]
[ +0.000142] meson_drv_unbind+0x1d8/0x2ac [meson_drm]
[ +0.000028] take_down_aggregate_device+0xb0/0x160
[ +0.000016] component_del+0x18c/0x360
[ +0.000009] meson_dw_hdmi_remove+0x28/0x40 [meson_dw_hdmi]
[ +0.000015] platform_remove+0x64/0xb0
[ +0.000009] device_remove+0xb8/0x154
[ +0.000009] device_release_driver_internal+0x398/0x5b0
[ +0.000009] driver_detach+0xac/0x1b0
[ +0.000009] bus_remove_driver+0x158/0x29c
[ +0.000009] driver_unregister+0x70/0xb0
[ +0.000008] platform_driver_unregister+0x20/0x2c
[ +0.000008] meson_dw_hdmi_platform_driver_exit+0x1c/0x30 [meson_dw_hdmi]
[ +0.000012] __do_sys_delete_module+0x288/0x400
[ +0.000011] __arm64_sys_delete_module+0x5c/0x80
[ +0.000009] invoke_syscall+0x74/0x260
[ +0.000009] el0_svc_common.constprop.0+0xcc/0x260
[ +0.000009] do_el0_svc+0x50/0x70
[ +0.000007] el0_svc+0x68/0x1a0
[ +0.000012] el0t_64_sync_handler+0x11c/0x150
[ +0.000008] el0t_64_sync+0x18c/0x190
[ +0.000018] Allocated by task 0:
[ +0.000007] (stack is not available)
[ +0.000011] Freed by task 2695:
[ +0.000008] kasan_save_stack+0x2c/0x5c
[ +0.000011] kasan_set_track+0x2c/0x40
[ +0.000008] kasan_set_free_info+0x28/0x50
[ +0.000009] ____kasan_slab_free+0x128/0x1d4
[ +0.000008] __kasan_slab_free+0x18/0x24
[ +0.000007] slab_free_freelist_hook+0x108/0x230
[ +0.000011] kfree+0x110/0x35c
[ +0.000008] release_nodes+0xf0/0x16c
[ +0.000009] devres_release_group+0x180/0x270
[ +0.000008] component_unbind+0x128/0x1e0
[ +0.000010] component_unbind_all+0x1b8/0x264
[ +0.000009] meson_drv_unbind+0x1a0/0x2ac [meson_drm]
[ +0.000025] take_down_aggregate_device+0xb0/0x160
[ +0.000009] component_del+0x18c/0x360
[ +0.000009] meson_dw_hdmi_remove+0x28/0x40 [meson_dw_hdmi]
[ +0.000012] platform_remove+0x64/0xb0
[ +0.000008] device_remove+0xb8/0x154
[ +0.000009] device_release_driver_internal+0x398/0x5b0
[ +0.000009] driver_detach+0xac/0x1b0
[ +0.000009] bus_remove_driver+0x158/0x29c
[ +0.000008] driver_unregister+0x70/0xb0
[ +0.000008] platform_driver_unregister+0x20/0x2c
[ +0.000008] meson_dw_hdmi_platform_driver_exit+0x1c/0x30 [meson_dw_hdmi]
[ +0.000011] __do_sys_delete_module+0x288/0x400
[ +0.000010] __arm64_sys_delete_module+0x5c/0x80
[ +0.000008] invoke_syscall+0x74/0x260
[ +0.000008] el0_svc_common.constprop.0+0xcc/0x260
[ +0.000008] do_el0_svc+0x50/0x70
[ +0.000007] el0_svc+0x68/0x1a0
[ +0.000009] el0t_64_sync_handler+0x11c/0x150
[ +0.000009] el0t_64_sync+0x18c/0x190
[ +0.000014] The buggy address belongs to the object at ffff000020c39000
which belongs to the cache kmalloc-4k of size 4096
[ +0.000008] The buggy address is located 1504 bytes inside of
4096-byte region [ffff000020c39000, ffff000020c3a000)
[ +0.000016] The buggy address belongs to the physical page:
[ +0.000009] page:fffffc0000830e00 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x20c38
[ +0.000013] head:fffffc0000830e00 order:3 compound_mapcount:0 compound_pincount:0
[ +0.000008] flags: 0xffff00000010200(slab|head|node=0|zone=0|lastcpupid=0xffff)
[ +0.000019] raw: 0ffff00000010200 fffffc0000fd4808 fffffc0000126208 ffff000000002e80
[ +0.000009] raw: 0000000000000000 0000000000020002 00000001ffffffff 0000000000000000
[ +0.000008] page dumped because: kasan: bad access detected
[ +0.000011] Memory state around the buggy address:
[ +0.000008] ffff000020c39480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ +0.000007] ffff000020c39500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ +0.000007] >ffff000020c39580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ +0.000007] ^
[ +0.000007] ffff000020c39600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ +0.000007] ffff000020c39680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ +0.000006] ==================================================================
The reason this is happening is unloading meson-dw-hdmi will cause the
component API to take down the aggregate device, which in turn will cause
all devres-managed memory to be freed, including the struct dw_hdmi
allocated in dw_hdmi_probe. This struct embeds a struct drm_bridge that is
added at the end of the function, and which is later on picked up in
meson_encoder_hdmi_init.
However, when attaching the bridge to the encoder created in
meson_encoder_hdmi_init, it's linked to the encoder's bridge chain, from
where it never leaves, even after devres_release_group is called when the
driver's components are unbound and the embedding structure freed.
Then, when calling drm_dev_put in the aggregate driver's unbind function,
drm_bridge_detach is called for every single bridge linked to the encoder,
including the one whose memory had already been deallocated.
Fix by calling component_unbind_all after drm_dev_put.
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220919010940.419893-2-adrian.larumbe@collabora.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Maxime Ripard <maxime@cerno.tech>
Date: Mon Jul 11 19:38:31 2022 +0200
drm/mipi-dsi: Detach devices when removing the host
[ Upstream commit 668a8f17b5290d04ef7343636a5588a0692731a1 ]
Whenever the MIPI-DSI host is unregistered, the code of
mipi_dsi_host_unregister() loops over every device currently found on that
bus and will unregister it.
However, it doesn't detach it from the bus first, which leads to all kind
of resource leaks if the host wants to perform some clean up whenever a
device is detached.
Fixes: 068a00233969 ("drm: Add MIPI DSI bus support")
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220711173939.1132294-2-maxime@cerno.tech
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Kuogee Hsieh <quic_khsieh@quicinc.com>
Date: Wed Aug 24 13:15:50 2022 -0700
drm/msm/dp: correct 1.62G link rate at dp_catalog_ctrl_config_msa()
[ Upstream commit aa0bff10af1c4b92e6b56e3e1b7f81c660d3ba78 ]
At current implementation there is an extra 0 at 1.62G link rate which
cause no correct pixel_div selected for 1.62G link rate to calculate
mvid and nvid. This patch delete the extra 0 to have mvid and nvid be
calculated correctly.
Changes in v2:
-- fix Fixes tag's text
Changes in v3:
-- fix misspelling of "Reviewed-by"
Fixes: 937f941ca06f ("drm/msm/dp: Use qmp phy for DP PLL and PHY")
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/499328/
Link: https://lore.kernel.org/r/1661372150-3764-1-git-send-email-quic_khsieh@quicinc.com
[DB: rewrapped commit message]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Date: Wed Jun 15 15:57:01 2022 +0300
drm/msm/dpu: index dpu_kms->hw_vbif using vbif_idx
[ Upstream commit 7538f80ae0d98bf51eb89eee5344aec219902d42 ]
Remove loops over hw_vbif. Instead always VBIF's idx as an index in the
array. This fixes an error in dpu_kms_hw_init(), where we fill
dpu_kms->hw_vbif[i], but check for an error pointer at
dpu_kms->hw_vbif[vbif_idx].
Fixes: 25fdd5933e4c ("drm/msm: Add SDM845 DPU support")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/489569/
Link: https://lore.kernel.org/r/20220615125703.24647-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Lyude Paul <lyude@redhat.com>
Date: Tue Aug 16 14:04:36 2022 -0400
drm/nouveau/kms/nv140-: Disable interlacing
commit 8ba9249396bef37cb68be9e8dee7847f1737db9d upstream.
As it turns out: while Nvidia does actually have interlacing knobs on their
GPU still pretty much no current GPUs since Volta actually support it.
Trying interlacing on these GPUs will result in NVDisplay being quite
unhappy like so:
nouveau 0000:1f:00.0: disp: chid 0 stat 00004802 reason 4 [INVALID_ARG] mthd 2008 data 00000001 code 00080000
nouveau 0000:1f:00.0: disp: chid 0 stat 10005080 reason 5 [INVALID_STATE] mthd 0200 data 00000001 code 00000001
So let's fix this by following the same behavior Nvidia's driver does and
disable interlacing entirely.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220816180436.156310-1-lyude@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jianglei Nie <niejianglei2021@163.com>
Date: Tue Jul 5 17:43:06 2022 +0800
drm/nouveau/nouveau_bo: fix potential memory leak in nouveau_bo_alloc()
[ Upstream commit 6dc548745d5b5102e3c53dc5097296ac270b6c69 ]
nouveau_bo_alloc() allocates a memory chunk for "nvbo" with kzalloc().
When some error occurs, "nvbo" should be released. But when
WARN_ON(pi < 0)) equals true, the function return ERR_PTR without
releasing the "nvbo", which will lead to a memory leak.
We should release the "nvbo" with kfree() if WARN_ON(pi < 0)) equals true.
Signed-off-by: Jianglei Nie <niejianglei2021@163.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220705094306.2244103-1-niejianglei2021@163.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jianglei Nie <niejianglei2021@163.com>
Date: Tue Jul 5 21:25:46 2022 +0800
drm/nouveau: fix a use-after-free in nouveau_gem_prime_import_sg_table()
commit 540dfd188ea2940582841c1c220bd035a7db0e51 upstream.
nouveau_bo_init() is backed by ttm_bo_init() and ferries its return code
back to the caller. On failures, ttm will call nouveau_bo_del_ttm() and
free the memory.Thus, when nouveau_bo_init() returns an error, the gem
object has already been released. Then the call to nouveau_bo_ref() will
use the freed "nvbo->bo" and lead to a use-after-free bug.
We should delete the call to nouveau_bo_ref() to avoid the use-after-free.
Signed-off-by: Jianglei Nie <niejianglei2021@163.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: 019cbd4a4feb ("drm/nouveau: Initialize GEM object before TTM object")
Cc: Thierry Reding <treding@nvidia.com>
Cc: <stable@vger.kernel.org> # v5.4+
Link: https://patchwork.freedesktop.org/patch/msgid/20220705132546.2247677-1-niejianglei2021@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Liang He <windhl@126.com>
Date: Fri Jul 22 22:43:48 2022 +0800
drm/omap: dss: Fix refcount leak bugs
[ Upstream commit 8b42057e62120813ebe9274f508fa785b7cab33a ]
In dss_init_ports() and __dss_uninit_ports(), we should call
of_node_put() for the reference returned by of_graph_get_port_by_id()
in fail path or when it is not used anymore.
Fixes: 09bffa6e5192 ("drm: omap: use common OF graph helpers")
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220722144348.1306569-1-windhl@126.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Takashi Iwai <tiwai@suse.de>
Date: Thu Sep 8 11:51:04 2022 +0200
drm/udl: Restore display mode on resume
commit 6d6e732835db92e66c28dbcf258a7e3d3c71420d upstream.
Restore the display mode whne resuming from suspend. Currently, the
display remains dark.
On resume, the CRTC's mode does not change, but the 'active' flag
changes to 'true'. Taking this into account when considering a mode
switch restores the display mode.
The bug is reproducable by using Gnome with udl and observing the
adapter's suspend/resume behavior.
Actually, the whole check added in udl_simple_display_pipe_enable()
about the crtc_state->mode_changed was bogus. We should drop the
whole check and always apply the mode change in this function.
[ tiwai -- Drop the mode_changed check entirely instead, per Daniel's
suggestion ]
Fixes: 997d33c35618 ("drm/udl: Inline DPMS code into CRTC enable and disable functions")
Cc: <stable@vger.kernel.org>
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220908095115.23396-2-tiwai@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Date: Mon Aug 29 15:11:42 2022 +0200
drm/vc4: vec: Fix timings for VEC modes
[ Upstream commit 30d7565be96b3946c18a1ce3fd538f7946839092 ]
This commit fixes vertical timings of the VEC (composite output) modes
to accurately represent the 525-line ("NTSC") and 625-line ("PAL") ITU-R
standards.
Previous timings were actually defined as 502 and 601 lines, resulting
in non-standard 62.69 Hz and 52 Hz signals being generated,
respectively.
Signed-off-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728-rpi-analog-tv-properties-v2-28-459522d653a7@cerno.tech
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Date: Thu Jun 30 23:07:19 2022 +0300
drm/virtio: Check whether transferred 2D BO is shmem
commit e473216b42aa1fd9fc6b94b608b42c210c655908 upstream.
Transferred 2D BO always must be a shmem BO. Add check for that to prevent
NULL dereference if userspace passes a VRAM BO.
Cc: stable@vger.kernel.org
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220630200726.1884320-3-dmitry.osipenko@collabora.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Date: Thu Jun 30 23:07:18 2022 +0300
drm/virtio: Correct drm_gem_shmem_get_sg_table() error handling
[ Upstream commit 64b88afbd92fbf434759d1896a7cf705e1c00e79 ]
Previous commit fixed checking of the ERR_PTR value returned by
drm_gem_shmem_get_sg_table(), but it missed to zero out the shmem->pages,
which will crash virtio_gpu_cleanup_object(). Add the missing zeroing of
the shmem->pages.
Fixes: c24968734abf ("drm/virtio: Fix NULL vs IS_ERR checking in virtio_gpu_object_shmem_init")
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220630200726.1884320-2-dmitry.osipenko@collabora.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Date: Thu Jun 30 23:07:20 2022 +0300
drm/virtio: Unlock reservations on virtio_gpu_object_shmem_init() error
commit fdf0ff4d12cbcd76b53f27c96ce51ddca400884a upstream.
Unlock reservations in the error code path of virtio_gpu_object_create()
to silence debug warning splat produced by ww_mutex_destroy(&obj->lock)
when GEM is released with the held lock.
Cc: stable@vger.kernel.org
Fixes: 30172efbfb84 ("drm/virtio: blob prep: refactor getting pages and attaching backing")
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220630200726.1884320-4-dmitry.osipenko@collabora.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Date: Thu Jun 30 23:07:22 2022 +0300
drm/virtio: Use appropriate atomic state in virtio_gpu_plane_cleanup_fb()
commit 4656b3a26a9e9fe5f04bfd2ab55b066266ba7f4d upstream.
Make virtio_gpu_plane_cleanup_fb() to clean the state which DRM core
wants to clean up and not the current plane's state. Normally the older
atomic state is cleaned up, but the newer state could also be cleaned up
in case of aborted commits.
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220630200726.1884320-6-dmitry.osipenko@collabora.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Rafael Mendonca <rafaelmendsr@gmail.com>
Date: Fri Sep 16 17:47:51 2022 -0300
drm/vmwgfx: Fix memory leak in vmw_mksstat_add_ioctl()
[ Upstream commit a40c7f61d12fbd1e785e59140b9efd57127c0c33 ]
If the copy of the description string from userspace fails, then the page
for the instance descriptor doesn't get freed before returning -EFAULT,
which leads to a memleak.
Fixes: 7a7a933edd6c ("drm/vmwgfx: Introduce VMware mks-guest-stats")
Signed-off-by: Rafael Mendonca <rafaelmendsr@gmail.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Signed-off-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220916204751.720716-1-rafaelmendsr@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Alvin Å ipraga <alsi@bang-olufsen.dk>
Date: Sun Jun 12 16:48:53 2022 +0200
drm: bridge: adv7511: fix CEC power down control register offset
[ Upstream commit 1d22b6033ea113a4c3850dfa2c0770885c81aec8 ]
The ADV7511_REG_CEC_CTRL = 0xE2 register is part of the main register
map - not the CEC register map. As such, we shouldn't apply an offset to
the register address. Doing so will cause us to address a bogus register
for chips with a CEC register map offset (e.g. ADV7533).
Fixes: 3b1b975003e4 ("drm: adv7511/33: add HDMI CEC support")
Signed-off-by: Alvin Å ipraga <alsi@bang-olufsen.dk>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220612144854.2223873-2-alvin@pqrs.dk
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Alvin Å ipraga <alsi@bang-olufsen.dk>
Date: Sun Jun 12 16:48:54 2022 +0200
drm: bridge: adv7511: unregister cec i2c device after cec adapter
[ Upstream commit 40cdb02cb9f965732eb543d47f15bef8d10f0f5f ]
cec_unregister_adapter() assumes that the underlying adapter ops are
callable. For example, if the CEC adapter currently has a valid physical
address, then the unregistration procedure will invalidate the physical
address by setting it to f.f.f.f. Whence the following kernel oops
observed after removing the adv7511 module:
Unable to handle kernel execution of user memory at virtual address 0000000000000000
Internal error: Oops: 86000004 [#1] PREEMPT_RT SMP
Call trace:
0x0
adv7511_cec_adap_log_addr+0x1ac/0x1c8 [adv7511]
cec_adap_unconfigure+0x44/0x90 [cec]
__cec_s_phys_addr.part.0+0x68/0x230 [cec]
__cec_s_phys_addr+0x40/0x50 [cec]
cec_unregister_adapter+0xb4/0x118 [cec]
adv7511_remove+0x60/0x90 [adv7511]
i2c_device_remove+0x34/0xe0
device_release_driver_internal+0x114/0x1f0
driver_detach+0x54/0xe0
bus_remove_driver+0x60/0xd8
driver_unregister+0x34/0x60
i2c_del_driver+0x2c/0x68
adv7511_exit+0x1c/0x67c [adv7511]
__arm64_sys_delete_module+0x154/0x288
invoke_syscall+0x48/0x100
el0_svc_common.constprop.0+0x48/0xe8
do_el0_svc+0x28/0x88
el0_svc+0x1c/0x50
el0t_64_sync_handler+0xa8/0xb0
el0t_64_sync+0x15c/0x160
Code: bad PC value
---[ end trace 0000000000000000 ]---
Protect against this scenario by unregistering i2c_cec after
unregistering the CEC adapter. Duly disable the CEC clock afterwards
too.
Fixes: 3b1b975003e4 ("drm: adv7511/33: add HDMI CEC support")
Signed-off-by: Alvin Å ipraga <alsi@bang-olufsen.dk>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220612144854.2223873-3-alvin@pqrs.dk
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Lucas Stach <l.stach@pengutronix.de>
Date: Fri Aug 26 20:57:33 2022 +0200
drm: bridge: dw_hdmi: only trigger hotplug event on link change
[ Upstream commit da09daf881082266e4075657fac53c7966de8e4d ]
There are two events that signal a real change of the link state: HPD going
high means the sink is newly connected or wants the source to re-read the
EDID, RX sense going low is a indication that the link has been disconnected.
Ignore the other two events that also trigger interrupts, but don't need
immediate attention: HPD going low does not necessarily mean the link has
been lost and should not trigger a immediate read of the status. RX sense
going high also does not require a detect cycle, as HPD going high is the
right point in time to read the EDID.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> (v1)
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220826185733.3213248-1-l.stach@pengutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Maya Matuszczyk <maccraft123mc@gmail.com>
Date: Wed Aug 3 20:24:03 2022 +0200
drm: panel-orientation-quirks: Add quirk for Anbernic Win600
[ Upstream commit 770e19076065e079a32f33eb11be2057c87f1cde ]
This device is another x86 gaming handheld, and as (hopefully) there is
only one set of DMI IDs it's using DMI_EXACT_MATCH
Signed-off-by: Maya Matuszczyk <maccraft123mc@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220803182402.1217293-1-maccraft123mc@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Javier Martinez Canillas <javierm@redhat.com>
Date: Tue Jul 5 12:02:14 2022 +0200
drm: Prevent drm_copy_field() to attempt copying a NULL pointer
[ Upstream commit f6ee30407e883042482ad4ad30da5eaba47872ee ]
There are some struct drm_driver fields that are required by drivers since
drm_copy_field() attempts to copy them to user-space via DRM_IOCTL_VERSION.
But it can be possible that a driver has a bug and did not set some of the
fields, which leads to drm_copy_field() attempting to copy a NULL pointer:
[ +10.395966] Unable to handle kernel access to user memory outside uaccess routines at virtual address 0000000000000000
[ +0.010955] Mem abort info:
[ +0.002835] ESR = 0x0000000096000004
[ +0.003872] EC = 0x25: DABT (current EL), IL = 32 bits
[ +0.005395] SET = 0, FnV = 0
[ +0.003113] EA = 0, S1PTW = 0
[ +0.003182] FSC = 0x04: level 0 translation fault
[ +0.004964] Data abort info:
[ +0.002919] ISV = 0, ISS = 0x00000004
[ +0.003886] CM = 0, WnR = 0
[ +0.003040] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000115dad000
[ +0.006536] [0000000000000000] pgd=0000000000000000, p4d=0000000000000000
[ +0.006925] Internal error: Oops: 96000004 [#1] SMP
...
[ +0.011113] pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ +0.007061] pc : __pi_strlen+0x14/0x150
[ +0.003895] lr : drm_copy_field+0x30/0x1a4
[ +0.004156] sp : ffff8000094b3a50
[ +0.003355] x29: ffff8000094b3a50 x28: ffff8000094b3b70 x27: 0000000000000040
[ +0.007242] x26: ffff443743c2ba00 x25: 0000000000000000 x24: 0000000000000040
[ +0.007243] x23: ffff443743c2ba00 x22: ffff8000094b3b70 x21: 0000000000000000
[ +0.007241] x20: 0000000000000000 x19: ffff8000094b3b90 x18: 0000000000000000
[ +0.007241] x17: 0000000000000000 x16: 0000000000000000 x15: 0000aaab14b9af40
[ +0.007241] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
[ +0.007239] x11: 0000000000000000 x10: 0000000000000000 x9 : ffffa524ad67d4d8
[ +0.007242] x8 : 0101010101010101 x7 : 7f7f7f7f7f7f7f7f x6 : 6c6e6263606e7141
[ +0.007239] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000
[ +0.007241] x2 : 0000000000000000 x1 : ffff8000094b3b90 x0 : 0000000000000000
[ +0.007240] Call trace:
[ +0.002475] __pi_strlen+0x14/0x150
[ +0.003537] drm_version+0x84/0xac
[ +0.003448] drm_ioctl_kernel+0xa8/0x16c
[ +0.003975] drm_ioctl+0x270/0x580
[ +0.003448] __arm64_sys_ioctl+0xb8/0xfc
[ +0.003978] invoke_syscall+0x78/0x100
[ +0.003799] el0_svc_common.constprop.0+0x4c/0xf4
[ +0.004767] do_el0_svc+0x38/0x4c
[ +0.003357] el0_svc+0x34/0x100
[ +0.003185] el0t_64_sync_handler+0x11c/0x150
[ +0.004418] el0t_64_sync+0x190/0x194
[ +0.003716] Code: 92402c04 b200c3e8 f13fc09f 5400088c (a9400c02)
[ +0.006180] ---[ end trace 0000000000000000 ]---
Reported-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220705100215.572498-3-javierm@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Javier Martinez Canillas <javierm@redhat.com>
Date: Tue Jul 5 12:02:13 2022 +0200
drm: Use size_t type for len variable in drm_copy_field()
[ Upstream commit 94dc3471d1b2b58b3728558d0e3f264e9ce6ff59 ]
The strlen() function returns a size_t which is an unsigned int on 32-bit
arches and an unsigned long on 64-bit arches. But in the drm_copy_field()
function, the strlen() return value is assigned to an 'int len' variable.
Later, the len variable is passed as copy_from_user() third argument that
is an unsigned long parameter as well.
In theory, this can lead to an integer overflow via type conversion. Since
the assignment happens to a signed int lvalue instead of a size_t lvalue.
In practice though, that's unlikely since the values copied are set by DRM
drivers and not controlled by userspace. But using a size_t for len is the
correct thing to do anyways.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220705100215.572498-2-javierm@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Liang He <windhl@126.com>
Date: Mon Jul 11 21:15:50 2022 +0800
drm:pl111: Add of_node_put() when breaking out of for_each_available_child_of_node()
[ Upstream commit e0686dc6f2252e009c455fe99e2ce9d62a60eb47 ]
The reference 'child' in the iteration of for_each_available_child_of_node()
is only escaped out into a local variable which is only used to check
its value. So we still need to the of_node_put() when breaking of the
for_each_available_child_of_node() which will automatically increase
and decrease the refcount.
Fixes: ca454bd42dc2 ("drm/pl111: Support the Versatile Express")
Signed-off-by: Liang He <windhl@126.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220711131550.361350-1-windhl@126.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jim Cromie <jim.cromie@gmail.com>
Date: Sun Sep 4 15:40:46 2022 -0600
dyndbg: drop EXPORTed dynamic_debug_exec_queries
[ Upstream commit e26ef3af964acfea311403126acee8c56c89e26b ]
This exported fn is unused, and will not be needed. Lets dump it.
The export was added to let drm control pr_debugs, as part of using
them to avoid drm_debug_enabled overheads. But its better to just
implement the drm.debug bitmap interface, then its available for
everyone.
Fixes: a2d375eda771 ("dyndbg: refine export, rename to dynamic_debug_exec_queries()")
Fixes: 4c0d77828d4f ("dyndbg: export ddebug_exec_queries")
Acked-by: Jason Baron <jbaron@akamai.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20220904214134.408619-10-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jim Cromie <jim.cromie@gmail.com>
Date: Sun Sep 4 15:40:39 2022 -0600
dyndbg: fix module.dyndbg handling
[ Upstream commit 85d6b66d31c35158364058ee98fb69ab5bb6a6b1 ]
For CONFIG_DYNAMIC_DEBUG=N, the ddebug_dyndbg_module_param_cb()
stub-fn is too permissive:
bash-5.1# modprobe drm JUNKdyndbg
bash-5.1# modprobe drm dyndbgJUNK
[ 42.933220] dyndbg param is supported only in CONFIG_DYNAMIC_DEBUG builds
[ 42.937484] ACPI: bus type drm_connector registered
This caused no ill effects, because unknown parameters are either
ignored by default with an "unknown parameter" warning, or ignored
because dyndbg allows its no-effect use on non-dyndbg builds.
But since the code has an explicit feedback message, it should be
issued accurately. Fix with strcmp for exact param-name match.
Fixes: b48420c1d301 dynamic_debug: make dynamic-debug work for module initialization
Reported-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Jason Baron <jbaron@akamai.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20220904214134.408619-3-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jim Cromie <jim.cromie@gmail.com>
Date: Sun Sep 4 15:40:38 2022 -0600
dyndbg: fix static_branch manipulation
[ Upstream commit ee879be38bc87f8cedc79ae2742958db6533ca59 ]
In https://lore.kernel.org/lkml/20211209150910.GA23668@axis.com/
Vincent's patch commented on, and worked around, a bug toggling
static_branch's, when a 2nd PRINTK-ish flag was added. The bug
results in a premature static_branch_disable when the 1st of 2 flags
was disabled.
The cited commit computed newflags, but then in the JUMP_LABEL block,
failed to use that result, instead using just one of the terms in it.
Using newflags instead made the code work properly.
This is Vincents test-case, reduced. It needs the 2nd flag to
demonstrate the bug, but it's explanatory here.
pt_test() {
echo 5 > /sys/module/dynamic_debug/verbose
site="module tcp" # just one callsite
echo " $site =_ " > /proc/dynamic_debug/control # clear it
# A B ~A ~B
for flg in +T +p "-T #broke here" -p; do
echo " $site $flg " > /proc/dynamic_debug/control
done;
# A B ~B ~A
for flg in +T +p "-p #broke here" -T; do
echo " $site $flg " > /proc/dynamic_debug/control
done
}
pt_test
Fixes: 84da83a6ffc0 dyndbg: combine flags & mask into a struct, simplify with it
CC: vincent.whitchurch@axis.com
Acked-by: Jason Baron <jbaron@akamai.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20220904214134.408619-2-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jim Cromie <jim.cromie@gmail.com>
Date: Sun Sep 4 15:40:44 2022 -0600
dyndbg: let query-modname override actual module name
[ Upstream commit e75ef56f74965f426dd819a41336b640ffdd8fbc ]
dyndbg's control-parser: ddebug_parse_query(), requires that search
terms: module, func, file, lineno, are used only once in a query; a
thing cannot be named both foo and bar.
The cited commit added an overriding module modname, taken from the
module loader, which is authoritative. So it set query.module 1st,
which disallowed its use in the query-string.
But now, its useful to allow a module-load to enable classes across a
whole (or part of) a subsystem at once.
# enable (dynamic-debug in) drm only
modprobe drm dyndbg="class DRM_UT_CORE +p"
# get drm_helper too
modprobe drm dyndbg="class DRM_UT_CORE module drm* +p"
# get everything that knows DRM_UT_CORE
modprobe drm dyndbg="class DRM_UT_CORE module * +p"
# also for boot-args:
drm.dyndbg="class DRM_UT_CORE module * +p"
So convert the override into a default, by filling it only when/after
the query-string omitted the module.
NB: the query class FOO handling is forthcoming.
Fixes: 8e59b5cfb9a6 dynamic_debug: add modname arg to exec_query callchain
Acked-by: Jason Baron <jbaron@akamai.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20220904214134.408619-8-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ard Biesheuvel <ardb@kernel.org>
Date: Thu Sep 15 19:00:24 2022 +0200
efi: libstub: drop pointless get_memory_map() call
commit d80ca810f096ff66f451e7a3ed2f0cd9ef1ff519 upstream.
Currently, the non-x86 stub code calls get_memory_map() redundantly,
given that the data it returns is never used anywhere. So drop the call.
Cc: <stable@vger.kernel.org> # v4.14+
Fixes: 24d7c494ce46 ("efi/arm-stub: Round up FDT allocation to mapping size")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jakub Kicinski <kuba@kernel.org>
Date: Wed Sep 28 11:12:36 2022 -0700
eth: alx: take rtnl_lock on resume
[ Upstream commit 6ad1c94e1e7e374d88f0cfd77936dddb8339aaba ]
Zbynek reports that alx trips an rtnl assertion on resume:
RTNL: assertion failed at net/core/dev.c (2891)
RIP: 0010:netif_set_real_num_tx_queues+0x1ac/0x1c0
Call Trace:
<TASK>
__alx_open+0x230/0x570 [alx]
alx_resume+0x54/0x80 [alx]
? pci_legacy_resume+0x80/0x80
dpm_run_callback+0x4a/0x150
device_resume+0x8b/0x190
async_resume+0x19/0x30
async_run_entry_fn+0x30/0x130
process_one_work+0x1e5/0x3b0
indeed the driver does not hold rtnl_lock during its internal close
and re-open functions during suspend/resume. Note that this is not
a huge bug as the driver implements its own locking, and does not
implement changing the number of queues, but we need to silence
the splat.
Fixes: 4a5fe57e7751 ("alx: use fine-grained locking instead of RTNL")
Reported-and-tested-by: Zbynek Michl <zbynek.michl@gmail.com>
Reviewed-by: Niels Dossche <dossche.niels@gmail.com>
Link: https://lore.kernel.org/r/20220928181236.1053043-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dylan Yudaken <dylany@fb.com>
Date: Tue Aug 16 06:59:59 2022 -0700
eventfd: guard wake_up in eventfd fs calls as well
[ Upstream commit 9f0deaa12d832f488500a5afe9b912e9b3cfc432 ]
Guard wakeups that the user can trigger, and that may end up triggering a
call back into eventfd_signal. This is in addition to the current approach
that only guards in eventfd_signal.
Rename in_eventfd_signal -> in_eventfd at the same time to reflect this.
Without this there would be a deadlock in the following code using libaio:
int main()
{
struct io_context *ctx = NULL;
struct iocb iocb;
struct iocb *iocbs[] = { &iocb };
int evfd;
uint64_t val = 1;
evfd = eventfd(0, EFD_CLOEXEC);
assert(!io_setup(2, &ctx));
io_prep_poll(&iocb, evfd, POLLIN);
io_set_eventfd(&iocb, evfd);
assert(1 == io_submit(ctx, 1, iocbs));
write(evfd, &val, 8);
}
Signed-off-by: Dylan Yudaken <dylany@fb.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/20220816135959.1490641-1-dylany@fb.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jan Kara <jack@suse.cz>
Date: Wed Sep 14 17:29:33 2022 +0200
ext2: Use kvmalloc() for group descriptor array
[ Upstream commit e7c7fbb9a8574ebd89cc05db49d806c7476863ad ]
Array of group descriptor block buffers can get rather large. In theory
in can reach 1MB for perfectly valid filesystem and even more for
maliciously crafted ones. Use kvmalloc() to allocate the array to avoid
straining memory allocator with large order allocations unnecessarily.
Reported-by: syzbot+0f2f7e65a3007d39539f@syzkaller.appspotmail.com
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jan Kara <jack@suse.cz>
Date: Wed Jul 27 17:57:53 2022 +0200
ext4: avoid crash when inline data creation follows DIO write
commit 4bb26f2885ac6930984ee451b952c5a6042f2c0e upstream.
When inode is created and written to using direct IO, there is nothing
to clear the EXT4_STATE_MAY_INLINE_DATA flag. Thus when inode gets
truncated later to say 1 byte and written using normal write, we will
try to store the data as inline data. This confuses the code later
because the inode now has both normal block and inline data allocated
and the confusion manifests for example as:
kernel BUG at fs/ext4/inode.c:2721!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 359 Comm: repro Not tainted 5.19.0-rc8-00001-g31ba1e3b8305-dirty #15
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-1.fc36 04/01/2014
RIP: 0010:ext4_writepages+0x363d/0x3660
RSP: 0018:ffffc90000ccf260 EFLAGS: 00010293
RAX: ffffffff81e1abcd RBX: 0000008000000000 RCX: ffff88810842a180
RDX: 0000000000000000 RSI: 0000008000000000 RDI: 0000000000000000
RBP: ffffc90000ccf650 R08: ffffffff81e17d58 R09: ffffed10222c680b
R10: dfffe910222c680c R11: 1ffff110222c680a R12: ffff888111634128
R13: ffffc90000ccf880 R14: 0000008410000000 R15: 0000000000000001
FS: 00007f72635d2640(0000) GS:ffff88811b000000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000565243379180 CR3: 000000010aa74000 CR4: 0000000000150eb0
Call Trace:
<TASK>
do_writepages+0x397/0x640
filemap_fdatawrite_wbc+0x151/0x1b0
file_write_and_wait_range+0x1c9/0x2b0
ext4_sync_file+0x19e/0xa00
vfs_fsync_range+0x17b/0x190
ext4_buffered_write_iter+0x488/0x530
ext4_file_write_iter+0x449/0x1b90
vfs_write+0xbcd/0xf40
ksys_write+0x198/0x2c0
__x64_sys_write+0x7b/0x90
do_syscall_64+0x3d/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
</TASK>
Fix the problem by clearing EXT4_STATE_MAY_INLINE_DATA when we are doing
direct IO write to a file.
Cc: stable@kernel.org
Reported-by: Tadeusz Struk <tadeusz.struk@linaro.org>
Reported-by: syzbot+bd13648a53ed6933ca49@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?id=a1e89d09bbbcbd5c4cb45db230ee28c822953984
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Tested-by: Tadeusz Struk<tadeusz.struk@linaro.org>
Link: https://lore.kernel.org/r/20220727155753.13969-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jerry Lee æŽä¿®è³¢ <jerrylee@qnap.com>
Date: Mon Jul 18 10:25:19 2022 +0000
ext4: continue to expand file system when the target size doesn't reach
commit df3cb754d13d2cd5490db9b8d536311f8413a92e upstream.
When expanding a file system from (16TiB-2MiB) to 18TiB, the operation
exits early which leads to result inconsistency between resize2fs and
Ext4 kernel driver.
=== before ===
○ → resize2fs /dev/mapper/thin
resize2fs 1.45.5 (07-Jan-2020)
Filesystem at /dev/mapper/thin is mounted on /mnt/test; on-line resizing required
old_desc_blocks = 2048, new_desc_blocks = 2304
The filesystem on /dev/mapper/thin is now 4831837696 (4k) blocks long.
[ 865.186308] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[ 912.091502] dm-4: detected capacity change from 34359738368 to 38654705664
[ 970.030550] dm-5: detected capacity change from 34359734272 to 38654701568
[ 1000.012751] EXT4-fs (dm-5): resizing filesystem from 4294966784 to 4831837696 blocks
[ 1000.012878] EXT4-fs (dm-5): resized filesystem to 4294967296
=== after ===
[ 129.104898] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[ 143.773630] dm-4: detected capacity change from 34359738368 to 38654705664
[ 198.203246] dm-5: detected capacity change from 34359734272 to 38654701568
[ 207.918603] EXT4-fs (dm-5): resizing filesystem from 4294966784 to 4831837696 blocks
[ 207.918754] EXT4-fs (dm-5): resizing filesystem from 4294967296 to 4831837696 blocks
[ 207.918758] EXT4-fs (dm-5): Converting file system to meta_bg
[ 207.918790] EXT4-fs (dm-5): resizing filesystem from 4294967296 to 4831837696 blocks
[ 221.454050] EXT4-fs (dm-5): resized to 4658298880 blocks
[ 227.634613] EXT4-fs (dm-5): resized filesystem to 4831837696
Signed-off-by: Jerry Lee <jerrylee@qnap.com>
Link: https://lore.kernel.org/r/PU1PR04MB22635E739BD21150DC182AC6A18C9@PU1PR04MB2263.apcprd04.prod.outlook.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Lukas Czerner <lczerner@redhat.com>
Date: Wed Aug 24 18:03:47 2022 +0200
ext4: don't increase iversion counter for ea_inodes
commit 50f094a5580e6297bf10a807d16f0ee23fa576cf upstream.
ea_inodes are using i_version for storing part of the reference count so
we really need to leave it alone.
The problem can be reproduced by xfstest ext4/026 when iversion is
enabled. Fix it by not calling inode_inc_iversion() for EXT4_EA_INODE_FL
inodes in ext4_mark_iloc_dirty().
Cc: stable@kernel.org
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Link: https://lore.kernel.org/r/20220824160349.39664-1-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Josh Triplett <josh@joshtriplett.org>
Date: Sun Jul 31 20:24:53 2022 -0700
ext4: don't run ext4lazyinit for read-only filesystems
[ Upstream commit 426d15ad11419066f7042ffa8fbf1b5c21a1ecbe ]
On a read-only filesystem, we won't invoke the block allocator, so we
don't need to prefetch the block bitmaps.
This avoids starting and running the ext4lazyinit thread at all on a
system with no read-write ext4 filesystems (for instance, a container VM
with read-only filesystems underneath an overlayfs).
Fixes: 21175ca434c5 ("ext4: make prefetch_block_bitmaps default")
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Link: https://lore.kernel.org/r/48b41da1498fcac3287e2e06b660680646c1c050.1659323972.git.josh@joshtriplett.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Zhang Yi <yi.zhang@huawei.com>
Date: Wed Aug 31 15:46:29 2022 +0800
ext4: ext4_read_bh_lock() should submit IO if the buffer isn't uptodate
commit 0b73284c564d3ae4feef4bc920292f004acf4980 upstream.
Recently we notice that ext4 filesystem would occasionally fail to read
metadata from disk and report error message, but the disk and block
layer looks fine. After analyse, we lockon commit 88dbcbb3a484
("blkdev: avoid migration stalls for blkdev pages"). It provide a
migration method for the bdev, we could move page that has buffers
without extra users now, but it lock the buffers on the page, which
breaks the fragile metadata read operation on ext4 filesystem,
ext4_read_bh_lock() was copied from ll_rw_block(), it depends on the
assumption of that locked buffer means it is under IO. So it just
trylock the buffer and skip submit IO if it lock failed, after
wait_on_buffer() we conclude IO error because the buffer is not
uptodate.
This issue could be easily reproduced by add some delay just after
buffer_migrate_lock_buffers() in __buffer_migrate_folio() and do
fsstress on ext4 filesystem.
EXT4-fs error (device pmem1): __ext4_find_entry:1658: inode #73193:
comm fsstress: reading directory lblock 0
EXT4-fs error (device pmem1): __ext4_find_entry:1658: inode #75334:
comm fsstress: reading directory lblock 0
Fix it by removing the trylock logic in ext4_read_bh_lock(), just lock
the buffer and submit IO if it's not uptodate, and also leave over
readahead helper.
Cc: stable@kernel.org
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220831074629.3755110-1-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jan Kara <jack@suse.cz>
Date: Mon Aug 22 13:48:32 2022 +0200
ext4: fix check for block being out of directory size
commit 61a1d87a324ad5e3ed27c6699dfc93218fcf3201 upstream.
The check in __ext4_read_dirblock() for block being outside of directory
size was wrong because it compared block number against directory size
in bytes. Fix it.
Fixes: 65f8ea4cd57d ("ext4: check if directory block is within i_size")
CVE: CVE-2022-1184
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Link: https://lore.kernel.org/r/20220822114832.1482-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Zhihao Cheng <chengzhihao1@huawei.com>
Date: Sun Sep 11 12:52:04 2022 +0800
ext4: fix dir corruption when ext4_dx_add_entry() fails
commit 7177dd009c7c04290891e9a534cd47d1b620bd04 upstream.
Following process may lead to fs corruption:
1. ext4_create(dir/foo)
ext4_add_nondir
ext4_add_entry
ext4_dx_add_entry
a. add_dirent_to_buf
ext4_mark_inode_dirty
ext4_handle_dirty_metadata // dir inode bh is recorded into journal
b. ext4_append // dx_get_count(entries) == dx_get_limit(entries)
ext4_bread(EXT4_GET_BLOCKS_CREATE)
ext4_getblk
ext4_map_blocks
ext4_ext_map_blocks
ext4_mb_new_blocks
dquot_alloc_block
dquot_alloc_space_nodirty
inode_add_bytes // update dir's i_blocks
ext4_ext_insert_extent
ext4_ext_dirty // record extent bh into journal
ext4_handle_dirty_metadata(bh)
// record new block into journal
inode->i_size += inode->i_sb->s_blocksize // new size(in mem)
c. ext4_handle_dirty_dx_node(bh2)
// record dir's new block(dx_node) into journal
d. ext4_handle_dirty_dx_node((frame - 1)->bh)
e. ext4_handle_dirty_dx_node(frame->bh)
f. do_split // ret err!
g. add_dirent_to_buf
ext4_mark_inode_dirty(dir) // update raw_inode on disk(skipped)
2. fsck -a /dev/sdb
drop last block(dx_node) which beyonds dir's i_size.
/dev/sdb: recovering journal
/dev/sdb contains a file system with errors, check forced.
/dev/sdb: Inode 12, end of extent exceeds allowed value
(logical block 128, physical block 3938, len 1)
3. fsck -fn /dev/sdb
dx_node->entry[i].blk > dir->i_size
Pass 2: Checking directory structure
Problem in HTREE directory inode 12 (/dir): bad block number 128.
Clear HTree index? no
Problem in HTREE directory inode 12: block #3 has invalid depth (2)
Problem in HTREE directory inode 12: block #3 has bad max hash
Problem in HTREE directory inode 12: block #3 not referenced
Fix it by marking inode dirty directly inside ext4_append().
Fetch a reproducer in [Link].
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216466
Cc: stable@vger.kernel.org
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220911045204.516460-1-chengzhihao1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Ye Bin <yebin10@huawei.com>
Date: Wed Sep 14 18:08:59 2022 +0800
ext4: fix miss release buffer head in ext4_fc_write_inode
commit ccbf8eeb39f2ff00b54726a2b20b35d788c4ecb5 upstream.
In 'ext4_fc_write_inode' function first call 'ext4_get_inode_loc' get 'iloc',
after use it miss release 'iloc.bh'.
So just release 'iloc.bh' before 'ext4_fc_write_inode' return.
Cc: stable@kernel.org
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220914100859.1415196-1-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Baokun Li <libaokun1@huawei.com>
Date: Fri Aug 5 20:39:47 2022 +0800
ext4: fix null-ptr-deref in ext4_write_info
commit f9c1f248607d5546075d3f731e7607d5571f2b60 upstream.
I caught a null-ptr-deref bug as follows:
==================================================================
KASAN: null-ptr-deref in range [0x0000000000000068-0x000000000000006f]
CPU: 1 PID: 1589 Comm: umount Not tainted 5.10.0-02219-dirty #339
RIP: 0010:ext4_write_info+0x53/0x1b0
[...]
Call Trace:
dquot_writeback_dquots+0x341/0x9a0
ext4_sync_fs+0x19e/0x800
__sync_filesystem+0x83/0x100
sync_filesystem+0x89/0xf0
generic_shutdown_super+0x79/0x3e0
kill_block_super+0xa1/0x110
deactivate_locked_super+0xac/0x130
deactivate_super+0xb6/0xd0
cleanup_mnt+0x289/0x400
__cleanup_mnt+0x16/0x20
task_work_run+0x11c/0x1c0
exit_to_user_mode_prepare+0x203/0x210
syscall_exit_to_user_mode+0x5b/0x3a0
do_syscall_64+0x59/0x70
entry_SYSCALL_64_after_hwframe+0x44/0xa9
==================================================================
Above issue may happen as follows:
-------------------------------------
exit_to_user_mode_prepare
task_work_run
__cleanup_mnt
cleanup_mnt
deactivate_super
deactivate_locked_super
kill_block_super
generic_shutdown_super
shrink_dcache_for_umount
dentry = sb->s_root
sb->s_root = NULL <--- Here set NULL
sync_filesystem
__sync_filesystem
sb->s_op->sync_fs > ext4_sync_fs
dquot_writeback_dquots
sb->dq_op->write_info > ext4_write_info
ext4_journal_start(d_inode(sb->s_root), EXT4_HT_QUOTA, 2)
d_inode(sb->s_root)
s_root->d_inode <--- Null pointer dereference
To solve this problem, we use ext4_journal_start_sb directly
to avoid s_root being used.
Cc: stable@kernel.org
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220805123947.565152-1-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Ye Bin <yebin10@huawei.com>
Date: Wed Sep 21 14:40:38 2022 +0800
ext4: fix potential memory leak in ext4_fc_record_modified_inode()
commit 9305721a309fa1bd7c194e0d4a2335bf3b29dca4 upstream.
As krealloc may return NULL, in this case 'state->fc_modified_inodes'
may not be freed by krealloc, but 'state->fc_modified_inodes' already
set NULL. Then will lead to 'state->fc_modified_inodes' memory leak.
Cc: stable@kernel.org
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220921064040.3693255-2-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Ye Bin <yebin10@huawei.com>
Date: Wed Sep 21 14:40:39 2022 +0800
ext4: fix potential memory leak in ext4_fc_record_regions()
commit 7069d105c1f15c442b68af43f7fde784f3126739 upstream.
As krealloc may return NULL, in this case 'state->fc_regions' may not be
freed by krealloc, but 'state->fc_regions' already set NULL. Then will
lead to 'state->fc_regions' memory leak.
Cc: stable@kernel.org
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220921064040.3693255-3-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Lalith Rajendran <lalithkraj@google.com>
Date: Thu Aug 18 21:40:49 2022 +0000
ext4: make ext4_lazyinit_thread freezable
commit 3b575495ab8dbb4dbe85b4ac7f991693c3668ff5 upstream.
ext4_lazyinit_thread is not set freezable. Hence when the thread calls
try_to_freeze it doesn't freeze during suspend and continues to send
requests to the storage during suspend, resulting in suspend failures.
Cc: stable@kernel.org
Signed-off-by: Lalith Rajendran <lalithkraj@google.com>
Link: https://lore.kernel.org/r/20220818214049.1519544-1-lalithkraj@google.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jinke Han <hanjinke.666@bytedance.com>
Date: Sat Sep 3 09:24:29 2022 +0800
ext4: place buffer head allocation before handle start
commit d1052d236eddf6aa851434db1897b942e8db9921 upstream.
In our product environment, we encounter some jbd hung waiting handles to
stop while several writters were doing memory reclaim for buffer head
allocation in delay alloc write path. Ext4 do buffer head allocation with
holding transaction handle which may be blocked too long if the reclaim
works not so smooth. According to our bcc trace, the reclaim time in
buffer head allocation can reach 258s and the jbd transaction commit also
take almost the same time meanwhile. Except for these extreme cases,
we often see several seconds delays for cgroup memory reclaim on our
servers. This is more likely to happen considering docker environment.
One thing to note, the allocation of buffer heads is as often as page
allocation or more often when blocksize less than page size. Just like
page cache allocation, we should also place the buffer head allocation
before startting the handle.
Cc: stable@kernel.org
Signed-off-by: Jinke Han <hanjinke.666@bytedance.com>
Link: https://lore.kernel.org/r/20220903012429.22555-1-hanjinke.666@bytedance.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Ye Bin <yebin10@huawei.com>
Date: Wed Sep 21 14:40:40 2022 +0800
ext4: update 'state->fc_regions_size' after successful memory allocation
commit 27cd49780381c6ccbf248798e5e8fd076200ffba upstream.
To avoid to 'state->fc_regions_size' mismatch with 'state->fc_regions'
when fail to reallocate 'fc_reqions',only update 'state->fc_regions_size'
after 'state->fc_regions' is allocated successfully.
Cc: stable@kernel.org
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220921064040.3693255-4-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jaegeuk Kim <jaegeuk@kernel.org>
Date: Thu Aug 18 22:40:09 2022 -0700
f2fs: complete checkpoints during remount
commit 4f99484d27961cb194cebcd917176fa038a5025f upstream.
Otherwise, pending checkpoints can contribute a race condition to give a
quota warning.
- Thread - checkpoint thread
add checkpoints to the list
do_remount()
down_write(&sb->s_umount);
f2fs_remount()
block_operations()
down_read_trylock(&sb->s_umount) = 0
up_write(&sb->s_umount);
f2fs_quota_sync()
dquot_writeback_dquots()
WARN_ON_ONCE(!rwsem_is_locked(&sb->s_umount));
Or,
do_remount()
down_write(&sb->s_umount);
f2fs_remount()
create a ckpt thread
f2fs_enable_checkpoint() adds checkpoints
wait for f2fs_sync_fs()
trigger another pending checkpoint
block_operations()
down_read_trylock(&sb->s_umount) = 0
up_write(&sb->s_umount);
f2fs_quota_sync()
dquot_writeback_dquots()
WARN_ON_ONCE(!rwsem_is_locked(&sb->s_umount));
Cc: stable@vger.kernel.org
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Zhang Qilong <zhangqilong3@huawei.com>
Date: Mon Sep 5 12:59:17 2022 +0800
f2fs: fix race condition on setting FI_NO_EXTENT flag
[ Upstream commit 07725adc55c0a414c10acb5c8c86cea34b95ddef ]
The following scenarios exist.
process A: process B:
->f2fs_drop_extent_tree ->f2fs_update_extent_cache_range
->f2fs_update_extent_tree_range
->write_lock
->set_inode_flag
->is_inode_flag_set
->__free_extent_tree // Shouldn't
// have been
// cleaned up
// here
->write_lock
In this case, the "FI_NO_EXTENT" flag is set between
f2fs_update_extent_tree_range and is_inode_flag_set
by other process. it leads to clearing the whole exten
tree which should not have happened. And we fix it by
move the setting it to the range of write_lock.
Fixes:5f281fab9b9a3 ("f2fs: disable extent_cache for fcollapse/finsert inodes")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Chao Yu <chao@kernel.org>
Date: Wed Sep 14 21:28:46 2022 +0800
f2fs: fix to account FS_CP_DATA_IO correctly
[ Upstream commit d80afefb17e01aa0c46a8eebc01882e0ebd8b0f6 ]
f2fs_inode_info.cp_task was introduced for FS_CP_DATA_IO accounting
since commit b0af6d491a6b ("f2fs: add app/fs io stat").
However, cp_task usage coverage has been increased due to below
commits:
commit 040d2bb318d1 ("f2fs: fix to avoid deadloop if data_flush is on")
commit 186857c5a14a ("f2fs: fix potential recursive call when enabling data_flush")
So that, if data_flush mountoption is on, when data flush was
triggered from background, the IO from data flush will be accounted
as checkpoint IO type incorrectly.
In order to fix this issue, this patch splits cp_task into two:
a) cp_task: used for IO accounting
b) wb_task: used to avoid deadlock
Fixes: 040d2bb318d1 ("f2fs: fix to avoid deadloop if data_flush is on")
Fixes: 186857c5a14a ("f2fs: fix potential recursive call when enabling data_flush")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Chao Yu <chao@kernel.org>
Date: Tue Sep 13 10:08:41 2022 +0800
f2fs: fix to do sanity check on destination blkaddr during recovery
commit 0ef4ca04a3f9223ff8bc440041c524b2123e09a3 upstream.
As Wenqing Liu reported in bugzilla:
https://bugzilla.kernel.org/show_bug.cgi?id=216456
loop5: detected capacity change from 0 to 131072
F2FS-fs (loop5): recover_inode: ino = 6, name = hln, inline = 1
F2FS-fs (loop5): recover_data: ino = 6 (i_size: recover) err = 0
F2FS-fs (loop5): recover_inode: ino = 6, name = hln, inline = 1
F2FS-fs (loop5): recover_data: ino = 6 (i_size: recover) err = 0
F2FS-fs (loop5): recover_inode: ino = 6, name = hln, inline = 1
F2FS-fs (loop5): recover_data: ino = 6 (i_size: recover) err = 0
F2FS-fs (loop5): Bitmap was wrongly set, blk:5634
------------[ cut here ]------------
WARNING: CPU: 3 PID: 1013 at fs/f2fs/segment.c:2198
RIP: 0010:update_sit_entry+0xa55/0x10b0 [f2fs]
Call Trace:
<TASK>
f2fs_do_replace_block+0xa98/0x1890 [f2fs]
f2fs_replace_block+0xeb/0x180 [f2fs]
recover_data+0x1a69/0x6ae0 [f2fs]
f2fs_recover_fsync_data+0x120d/0x1fc0 [f2fs]
f2fs_fill_super+0x4665/0x61e0 [f2fs]
mount_bdev+0x2cf/0x3b0
legacy_get_tree+0xed/0x1d0
vfs_get_tree+0x81/0x2b0
path_mount+0x47e/0x19d0
do_mount+0xce/0xf0
__x64_sys_mount+0x12c/0x1a0
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
If we enable CONFIG_F2FS_CHECK_FS config, it will trigger a kernel panic
instead of warning.
The root cause is: in fuzzed image, SIT table is inconsistent with inode
mapping table, result in triggering such warning during SIT table update.
This patch introduces a new flag DATA_GENERIC_ENHANCE_UPDATE, w/ this
flag, data block recovery flow can check destination blkaddr's validation
in SIT table, and skip f2fs_replace_block() to avoid inconsistent status.
Cc: stable@vger.kernel.org
Reported-by: Wenqing Liu <wenqingliu0120@gmail.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Chao Yu <chao@kernel.org>
Date: Wed Sep 14 19:51:51 2022 +0800
f2fs: fix to do sanity check on summary info
commit c6ad7fd16657ebd34a87a97d9588195aae87597d upstream.
As Wenqing Liu reported in bugzilla:
https://bugzilla.kernel.org/show_bug.cgi?id=216456
BUG: KASAN: use-after-free in recover_data+0x63ae/0x6ae0 [f2fs]
Read of size 4 at addr ffff8881464dcd80 by task mount/1013
CPU: 3 PID: 1013 Comm: mount Tainted: G W 6.0.0-rc4 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014
Call Trace:
dump_stack_lvl+0x45/0x5e
print_report.cold+0xf3/0x68d
kasan_report+0xa8/0x130
recover_data+0x63ae/0x6ae0 [f2fs]
f2fs_recover_fsync_data+0x120d/0x1fc0 [f2fs]
f2fs_fill_super+0x4665/0x61e0 [f2fs]
mount_bdev+0x2cf/0x3b0
legacy_get_tree+0xed/0x1d0
vfs_get_tree+0x81/0x2b0
path_mount+0x47e/0x19d0
do_mount+0xce/0xf0
__x64_sys_mount+0x12c/0x1a0
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
The root cause is: in fuzzed image, SSA table is corrupted: ofs_in_node
is larger than ADDRS_PER_PAGE(), result in out-of-range access on 4k-size
page.
- recover_data
- do_recover_data
- check_index_in_prev_nodes
- f2fs_data_blkaddr
This patch adds sanity check on summary info in recovery and GC flow
in where the flows rely on them.
After patch:
[ 29.310883] F2FS-fs (loop0): Inconsistent ofs_in_node:65286 in summary, ino:0, nid:6, max:1018
Cc: stable@vger.kernel.org
Reported-by: Wenqing Liu <wenqingliu0120@gmail.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jaegeuk Kim <jaegeuk@kernel.org>
Date: Fri Aug 19 15:52:02 2022 -0700
f2fs: flush pending checkpoints when freezing super
commit c7b58576370147833999fd4cc874d0f918bdf9ca upstream.
This avoids -EINVAL when trying to freeze f2fs.
Cc: stable@vger.kernel.org
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jaegeuk Kim <jaegeuk@kernel.org>
Date: Tue Aug 23 10:18:42 2022 -0700
f2fs: increase the limit for reserve_root
commit da35fe96d12d15779f3cb74929b7ed03941cf983 upstream.
This patch increases the threshold that limits the reserved root space from 0.2%
to 12.5% by using simple shift operation.
Typically Android sets 128MB, but if the storage capacity is 32GB, 0.2% which is
around 64MB becomes too small. Let's relax it.
Cc: stable@vger.kernel.org
Reported-by: Aran Dalton <arda@allwinnertech.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Hyunwoo Kim <imv4bel@gmail.com>
Date: Sun Sep 25 06:32:43 2022 -0700
fbdev: smscufx: Fix use-after-free in ufx_ops_open()
commit 5610bcfe8693c02e2e4c8b31427f1bdbdecc839c upstream.
A race condition may occur if the user physically removes the
USB device while calling open() for this device node.
This is a race condition between the ufx_ops_open() function and
the ufx_usb_disconnect() function, which may eventually result in UAF.
So, add a mutex to the ufx_ops_open() and ufx_usb_disconnect() functions
to avoid race contidion of krefs.
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Guilherme G. Piccoli <gpiccoli@igalia.com>
Date: Fri Sep 9 17:07:55 2022 -0300
firmware: google: Test spinlock on panic path to avoid lockups
[ Upstream commit 3e081438b8e639cc76ef1a5ce0c1bd8a154082c7 ]
Currently the gsmi driver registers a panic notifier as well as
reboot and die notifiers. The callbacks registered are called in
atomic and very limited context - for instance, panic disables
preemption and local IRQs, also all secondary CPUs (not executing
the panic path) are shutdown.
With that said, taking a spinlock in this scenario is a dangerous
invitation for lockup scenarios. So, fix that by checking if the
spinlock is free to acquire in the panic notifier callback - if not,
bail-out and avoid a potential hang.
Fixes: 74c5b31c6618 ("driver: Google EFI SMI")
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: David Gow <davidgow@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Julius Werner <jwerner@chromium.org>
Cc: Petr Mladek <pmladek@suse.com>
Reviewed-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Link: https://lore.kernel.org/r/20220909200755.189679-1-gpiccoli@igalia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dan Carpenter <error27@gmail.com>
Date: Thu Sep 1 08:18:45 2022 +0300
fpga: prevent integer overflow in dfl_feature_ioctl_set_irq()
[ Upstream commit 939bc5453b8cbdde9f1e5110ce8309aedb1b501a ]
The "hdr.count * sizeof(s32)" multiplication can overflow on 32 bit
systems leading to memory corruption. Use array_size() to fix that.
Fixes: 322b598be4d9 ("fpga: dfl: introduce interrupt trigger setting API")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/YxBAtYCM38dM7yzI@kili
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Alexander Aring <aahringo@redhat.com>
Date: Mon Aug 15 15:43:14 2022 -0400
fs: dlm: fix race between test_bit() and queue_work()
commit eef6ec9bf390e836a6c4029f3620fe49528aa1fe upstream.
This patch fixes a race by using ls_cb_mutex around the bit
operations and conditional code blocks for LSFL_CB_DELAY.
The function dlm_callback_stop() expects to stop all callbacks and
flush all currently queued onces. The set_bit() is not enough because
there can still be queue_work() after the workqueue was flushed.
To avoid queue_work() after set_bit(), surround both by ls_cb_mutex.
Cc: stable@vger.kernel.org
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Alexander Aring <aahringo@redhat.com>
Date: Mon Aug 15 15:43:13 2022 -0400
fs: dlm: fix race in lowcomms
[ Upstream commit 30ea3257e8766027c4d8d609dcbd256ff9a76073 ]
This patch fixes a race between queue_work() in
_dlm_lowcomms_commit_msg() and srcu_read_unlock(). The queue_work() can
take the final reference of a dlm_msg and so msg->idx can contain
garbage which is signaled by the following warning:
[ 676.237050] ------------[ cut here ]------------
[ 676.237052] WARNING: CPU: 0 PID: 1060 at include/linux/srcu.h:189 dlm_lowcomms_commit_msg+0x41/0x50
[ 676.238945] Modules linked in: dlm_locktorture torture rpcsec_gss_krb5 intel_rapl_msr intel_rapl_common iTCO_wdt iTCO_vendor_support qxl kvm_intel drm_ttm_helper vmw_vsock_virtio_transport kvm vmw_vsock_virtio_transport_common ttm irqbypass crc32_pclmul joydev crc32c_intel serio_raw drm_kms_helper vsock virtio_scsi virtio_console virtio_balloon snd_pcm drm syscopyarea sysfillrect sysimgblt snd_timer fb_sys_fops i2c_i801 lpc_ich snd i2c_smbus soundcore pcspkr
[ 676.244227] CPU: 0 PID: 1060 Comm: lock_torture_wr Not tainted 5.19.0-rc3+ #1546
[ 676.245216] Hardware name: Red Hat KVM/RHEL-AV, BIOS 1.16.0-2.module+el8.7.0+15506+033991b0 04/01/2014
[ 676.246460] RIP: 0010:dlm_lowcomms_commit_msg+0x41/0x50
[ 676.247132] Code: fe ff ff ff 75 24 48 c7 c6 bd 0f 49 bb 48 c7 c7 38 7c 01 bd e8 00 e7 ca ff 89 de 48 c7 c7 60 78 01 bd e8 42 3d cd ff 5b 5d c3 <0f> 0b eb d8 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 48
[ 676.249253] RSP: 0018:ffffa401c18ffc68 EFLAGS: 00010282
[ 676.249855] RAX: 0000000000000001 RBX: 00000000ffff8b76 RCX: 0000000000000006
[ 676.250713] RDX: 0000000000000000 RSI: ffffffffbccf3a10 RDI: ffffffffbcc7b62e
[ 676.251610] RBP: ffffa401c18ffc70 R08: 0000000000000001 R09: 0000000000000001
[ 676.252481] R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000000005
[ 676.253421] R13: ffff8b76786ec370 R14: ffff8b76786ec370 R15: ffff8b76786ec480
[ 676.254257] FS: 0000000000000000(0000) GS:ffff8b7777800000(0000) knlGS:0000000000000000
[ 676.255239] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 676.255897] CR2: 00005590205d88b8 CR3: 000000017656c003 CR4: 0000000000770ee0
[ 676.256734] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 676.257567] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 676.258397] PKRU: 55555554
[ 676.258729] Call Trace:
[ 676.259063] <TASK>
[ 676.259354] dlm_midcomms_commit_mhandle+0xcc/0x110
[ 676.259964] queue_bast+0x8b/0xb0
[ 676.260423] grant_pending_locks+0x166/0x1b0
[ 676.261007] _unlock_lock+0x75/0x90
[ 676.261469] unlock_lock.isra.57+0x62/0xa0
[ 676.262009] dlm_unlock+0x21e/0x330
[ 676.262457] ? lock_torture_stats+0x80/0x80 [dlm_locktorture]
[ 676.263183] torture_unlock+0x5a/0x90 [dlm_locktorture]
[ 676.263815] ? preempt_count_sub+0xba/0x100
[ 676.264361] ? complete+0x1d/0x60
[ 676.264777] lock_torture_writer+0xb8/0x150 [dlm_locktorture]
[ 676.265555] kthread+0x10a/0x130
[ 676.266007] ? kthread_complete_and_exit+0x20/0x20
[ 676.266616] ret_from_fork+0x22/0x30
[ 676.267097] </TASK>
[ 676.267381] irq event stamp: 9579855
[ 676.267824] hardirqs last enabled at (9579863): [<ffffffffbb14e6f8>] __up_console_sem+0x58/0x60
[ 676.268896] hardirqs last disabled at (9579872): [<ffffffffbb14e6dd>] __up_console_sem+0x3d/0x60
[ 676.270008] softirqs last enabled at (9579798): [<ffffffffbc200349>] __do_softirq+0x349/0x4c7
[ 676.271438] softirqs last disabled at (9579897): [<ffffffffbb0d54c0>] irq_exit_rcu+0xb0/0xf0
[ 676.272796] ---[ end trace 0000000000000000 ]---
I reproduced this warning with dlm_locktorture test which is currently
not upstream. However this patch fix the issue by make a additional
refcount between dlm_lowcomms_new_msg() and dlm_lowcomms_commit_msg().
In case of the race the kref_put() in dlm_lowcomms_commit_msg() will be
the final put.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Alexander Aring <aahringo@redhat.com>
Date: Mon Aug 15 15:43:15 2022 -0400
fs: dlm: handle -EBUSY first in lock arg validation
commit 44637ca41d551d409a481117b07fa209b330fca9 upstream.
During lock arg validation, first check for -EBUSY cases, then for
-EINVAL cases. The -EINVAL checks look at lkb state variables
which are not stable when an lkb is busy and would cause an
-EBUSY result, e.g. lkb->lkb_grmode.
Cc: stable@vger.kernel.org
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Lukas Czerner <lczerner@redhat.com>
Date: Thu Aug 25 12:06:57 2022 +0200
fs: record I_DIRTY_TIME even if inode already has I_DIRTY_INODE
commit cbfecb927f429a6fa613d74b998496bd71e4438a upstream.
Currently the I_DIRTY_TIME will never get set if the inode already has
I_DIRTY_INODE with assumption that it supersedes I_DIRTY_TIME. That's
true, however ext4 will only update the on-disk inode in
->dirty_inode(), not on actual writeback. As a result if the inode
already has I_DIRTY_INODE state by the time we get to
__mark_inode_dirty() only with I_DIRTY_TIME, the time was already filled
into on-disk inode and will not get updated until the next I_DIRTY_INODE
update, which might never come if we crash or get a power failure.
The problem can be reproduced on ext4 by running xfstest generic/622
with -o iversion mount option.
Fix it by allowing I_DIRTY_TIME to be set even if the inode already has
I_DIRTY_INODE. Also make sure that the case is properly handled in
writeback_single_inode() as well. Additionally changes in
xfs_fs_dirty_inode() was made to accommodate for I_DIRTY_TIME in flag.
Thanks Jan Kara for suggestions on how to make this work properly.
Cc: Dave Chinner <david@fromorbit.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: stable@kernel.org
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220825100657.44217-1-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Date: Tue Jan 11 15:34:11 2022 +0800
fsi: core: Check error number after calling ida_simple_get
[ Upstream commit 35af9fb49bc5c6d61ef70b501c3a56fe161cce3e ]
If allocation fails, the ida_simple_get() will return error number.
So master->idx could be error number and be used in dev_set_name().
Therefore, it should be better to check it and return error if fails,
like the ida_simple_get() in __fsi_get_new_minor().
Fixes: 09aecfab93b8 ("drivers/fsi: Add fsi master definition")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20220111073411.614138-1-jiasheng@iscas.ac.cn
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Zheng Yejian <zhengyejian1@huawei.com>
Date: Mon Sep 26 15:20:08 2022 +0000
ftrace: Properly unset FTRACE_HASH_FL_MOD
commit 0ce0638edf5ec83343302b884fa208179580700a upstream.
When executing following commands like what document said, but the log
"#### all functions enabled ####" was not shown as expect:
1. Set a 'mod' filter:
$ echo 'write*:mod:ext3' > /sys/kernel/tracing/set_ftrace_filter
2. Invert above filter:
$ echo '!write*:mod:ext3' >> /sys/kernel/tracing/set_ftrace_filter
3. Read the file:
$ cat /sys/kernel/tracing/set_ftrace_filter
By some debugging, I found that flag FTRACE_HASH_FL_MOD was not unset
after inversion like above step 2 and then result of ftrace_hash_empty()
is incorrect.
Link: https://lkml.kernel.org/r/20220926152008.2239274-1-zhengyejian1@huawei.com
Cc: <mingo@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 8c08f0d5c6fb ("ftrace: Have cached module filters be an active filter")
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Martin Liska <mliska@suse.cz>
Date: Thu Oct 13 09:40:59 2022 +0200
gcov: support GCC 12.1 and newer compilers
commit 977ef30a7d888eeb52fb6908f99080f33e5309a8 upstream.
Starting with GCC 12.1, the created .gcda format can't be read by gcov
tool. There are 2 significant changes to the .gcda file format that
need to be supported:
a) [gcov: Use system IO buffering]
(23eb66d1d46a34cb28c4acbdf8a1deb80a7c5a05) changed that all sizes in
the format are in bytes and not in words (4B)
b) [gcov: make profile merging smarter]
(72e0c742bd01f8e7e6dcca64042b9ad7e75979de) add a new checksum to the
file header.
Tested with GCC 7.5, 10.4, 12.2 and the current master.
Link: https://lkml.kernel.org/r/624bda92-f307-30e9-9aaa-8cc678b2dfb2@suse.cz
Signed-off-by: Martin Liska <mliska@suse.cz>
Tested-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Date: Fri Sep 30 15:20:33 2022 +0200
gpio: rockchip: request GPIO mux to pinctrl when setting direction
commit 8ea8af6c8469156ac2042d83d73f6b74eb4b4b45 upstream.
Before the split of gpio and pinctrl sections in their own driver,
rockchip_set_mux was called in pinmux_ops.gpio_set_direction for
configuring a pin in its GPIO function.
This is essential for cases where pinctrl is "bypassed" by gpio
consumers otherwise the GPIO function is not configured for the pin and
it does not work. Such was the case for the sysfs/libgpiod userspace
GPIO handling.
Let's call pinctrl_gpio_direction_input/output when setting the
direction of a GPIO so that the pinctrl core requests from the rockchip
pinctrl driver to put the pin in its GPIO function.
Fixes: 9ce9a02039de ("pinctrl/rockchip: drop the gpio related codes")
Fixes: 936ee2675eee ("gpio/rockchip: add driver for rockchip gpio")
Cc: stable@vger.kernel.org
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Link: https://lore.kernel.org/r/20220930132033.4003377-3-foss+kernel@0leil.net
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Zeng Jingxiang <linuszeng@tencent.com>
Date: Wed Jul 27 15:31:19 2022 +0800
gpu: lontium-lt9611: Fix NULL pointer dereference in lt9611_connector_init()
[ Upstream commit ef8886f321c5dab8124b9153d25afa2a71d05323 ]
A NULL check for bridge->encoder shows that it may be NULL, but it
already been dereferenced on all paths leading to the check.
812 if (!bridge->encoder) {
Dereference the pointer bridge->encoder.
810 drm_connector_attach_encoder(<9611->connector, bridge->encoder);
Signed-off-by: Zeng Jingxiang <linuszeng@tencent.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220727073119.1578972-1-zengjx95@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Kees Cook <keescook@chromium.org>
Date: Tue Sep 14 12:49:03 2021 -0700
hardening: Avoid harmless Clang option under CONFIG_INIT_STACK_ALL_ZERO
commit f02003c860d921171be4a27e2893766eb3bc6871 upstream.
Currently under Clang, CC_HAS_AUTO_VAR_INIT_ZERO requires an extra
-enable flag compared to CC_HAS_AUTO_VAR_INIT_PATTERN. GCC 12[1] will
not, and will happily ignore the Clang-specific flag. However, its
presence on the command-line is both cumbersome and confusing. Due to
GCC's tolerant behavior, though, we can continue to use a single Kconfig
cc-option test for the feature on both compilers, but then drop the
Clang-specific option in the Makefile.
In other words, this patch does not change anything other than making the
compiler command line shorter once GCC supports -ftrivial-auto-var-init=zero.
[1] https://gcc.gnu.org/git/?p=gcc.git;a=commitdiff;h=a25e0b5e6ac8a77a71c229e0a7b744603365b0e9
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: llvm@lists.linux.dev
Fixes: dcb7c0b9461c ("hardening: Clarify Kconfig text for auto-var-init")
Suggested-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/lkml/20210914102837.6172-1-will@kernel.org/
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Kees Cook <keescook@chromium.org>
Date: Thu Sep 29 22:57:43 2022 -0700
hardening: Remove Clang's enable flag for -ftrivial-auto-var-init=zero
commit 607e57c6c62c00965ae276902c166834ce73014a upstream.
Now that Clang's -enable-trivial-auto-var-init-zero-knowing-it-will-be-removed-from-clang
option is no longer required, remove it from the command line. Clang 16
and later will warn when it is used, which will cause Kconfig to think
it can't use -ftrivial-auto-var-init=zero at all. Check for whether it
is required and only use it when so.
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: linux-kbuild@vger.kernel.org
Cc: llvm@lists.linux.dev
Cc: stable@vger.kernel.org
Fixes: f02003c860d9 ("hardening: Avoid harmless Clang option under CONFIG_INIT_STACK_ALL_ZERO")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Andri Yngvason <andri@yngvason.is>
Date: Wed Sep 7 15:01:59 2022 +0000
HID: multitouch: Add memory barriers
commit be6e2b5734a425941fcdcdbd2a9337be498ce2cf upstream.
This fixes broken atomic checks which cause a race between the
release-timer and processing of hid input.
I noticed that contacts were sometimes sticking, even with the "sticky
fingers" quirk enabled. This fixes that problem.
Cc: stable@vger.kernel.org
Fixes: 9609827458c3 ("HID: multitouch: optimize the sticky fingers timer")
Signed-off-by: Andri Yngvason <andri@yngvason.is>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20220907150159.2285460-1-andri@yngvason.is
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Hyunwoo Kim <imv4bel@gmail.com>
Date: Sun Sep 4 12:31:15 2022 -0700
HID: roccat: Fix use-after-free in roccat_read()
[ Upstream commit cacdb14b1c8d3804a3a7d31773bc7569837b71a4 ]
roccat_report_event() is responsible for registering
roccat-related reports in struct roccat_device.
int roccat_report_event(int minor, u8 const *data)
{
struct roccat_device *device;
struct roccat_reader *reader;
struct roccat_report *report;
uint8_t *new_value;
device = devices[minor];
new_value = kmemdup(data, device->report_size, GFP_ATOMIC);
if (!new_value)
return -ENOMEM;
report = &device->cbuf[device->cbuf_end];
/* passing NULL is safe */
kfree(report->value);
...
The registered report is stored in the struct roccat_device member
"struct roccat_report cbuf[ROCCAT_CBUF_SIZE];".
If more reports are received than the "ROCCAT_CBUF_SIZE" value,
kfree() the saved report from cbuf[0] and allocates a new reprot.
Since there is no lock when this kfree() is performed,
kfree() can be performed even while reading the saved report.
static ssize_t roccat_read(struct file *file, char __user *buffer,
size_t count, loff_t *ppos)
{
struct roccat_reader *reader = file->private_data;
struct roccat_device *device = reader->device;
struct roccat_report *report;
ssize_t retval = 0, len;
DECLARE_WAITQUEUE(wait, current);
mutex_lock(&device->cbuf_lock);
...
report = &device->cbuf[reader->cbuf_start];
/*
* If report is larger than requested amount of data, rest of report
* is lost!
*/
len = device->report_size > count ? count : device->report_size;
if (copy_to_user(buffer, report->value, len)) {
retval = -EFAULT;
goto exit_unlock;
}
...
The roccat_read() function receives the device->cbuf report and
delivers it to the user through copy_to_user().
If the N+ROCCAT_CBUF_SIZE th report is received while copying of
the Nth report->value is in progress, the pointer that copy_to_user()
is working on is kfree()ed and UAF read may occur. (race condition)
Since the device node of this driver does not set separate permissions,
this is not a security vulnerability, but because it is used for
requesting screen display of profile or dpi settings,
a user using the roccat device can apply udev to this device node or
There is a possibility to use it by giving.
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Miaoqian Lin <linmq006@gmail.com>
Date: Mon Apr 4 08:52:32 2022 +0000
HSI: omap_ssi: Fix refcount leak in ssi_probe
[ Upstream commit 9a2ea132df860177b33c9fd421b26c4e9a0a9396 ]
When returning or breaking early from a
for_each_available_child_of_node() loop, we need to explicitly call
of_node_put() on the child node to possibly release the node.
Fixes: b209e047bc74 ("HSI: Introduce OMAP SSI driver")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jack Wang <jinpu.wang@ionos.com>
Date: Fri Aug 26 12:12:27 2022 +0200
HSI: omap_ssi_port: Fix dma_map_sg error check
[ Upstream commit 551e325bbd3fb8b5a686ac1e6cf76e5641461cf2 ]
dma_map_sg return 0 on error, in case of error return -EIO
to caller.
Cc: Sebastian Reichel <sre@kernel.org>
Cc: linux-kernel@vger.kernel.org (open list)
Fixes: b209e047bc74 ("HSI: Introduce OMAP SSI driver")
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Gaurav Kohli <gauravkohli@linux.microsoft.com>
Date: Wed Oct 5 22:52:59 2022 -0700
hv_netvsc: Fix race between VF offering and VF association message from host
commit 365e1ececb2905f94cc10a5817c5b644a32a3ae2 upstream.
During vm boot, there might be possibility that vf registration
call comes before the vf association from host to vm.
And this might break netvsc vf path, To prevent the same block
vf registration until vf bind message comes from host.
Cc: stable@vger.kernel.org
Fixes: 00d7ddba11436 ("hv_netvsc: pair VF based on serial number")
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Gaurav Kohli <gauravkohli@linux.microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Liang He <windhl@126.com>
Date: Fri Sep 16 23:47:08 2022 +0800
hwmon: (gsc-hwmon) Call of_node_get() before of_find_xxx API
commit 7f62cf781e6567d59c8935dc8c6068ce2bb904b7 upstream.
In gsc_hwmon_get_devtree_pdata(), we should call of_node_get() before
the of_find_compatible_node() which will automatically call
of_node_put() for the 'from' argument.
Fixes: 3bce5377ef66 ("hwmon: Add Gateworks System Controller support")
Signed-off-by: Liang He <windhl@126.com>
Co-developed-by: Mengda Chen <chenmengda2009@163.com>
Signed-off-by: Mengda Chen <chenmengda2009@163.com>
Link: https://lore.kernel.org/r/20220916154708.3084515-1-chenmengda2009@163.com
Cc: stable@vger.kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Oleksandr Shamray <oleksandrs@nvidia.com>
Date: Thu Sep 29 15:16:42 2022 +0300
hwmon: (pmbus/mp2888) Fix sensors readouts for MPS Multi-phase mp2888 controller
[ Upstream commit 525dd5aed67a2f4f7278116fb92a24e6a53e2622 ]
Fix scale factors for reading MPS Multi-phase mp2888 controller.
Fixed sensors:
- PIN/POUT: based on vendor documentation, set bscale factor 0.5W/LSB
- IOUT: based on vendor documentation, set scale factor 0.25 A/LSB
Fixes: e4db7719d037 ("hwmon: (pmbus) Add support for MPS Multi-phase mp2888 controller")
Signed-off-by: Oleksandr Shamray <oleksandrs@nvidia.com>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20220929121642.63051-1-oleksandrs@nvidia.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jason A. Donenfeld <Jason@zx2c4.com>
Date: Sat Sep 24 12:11:51 2022 +0200
hwmon: (sht4x) do not overflow clamping operation on 32-bit platforms
[ Upstream commit f9c0cf8f26de367c58e48b02b1cdb9c377626e6f ]
On 32-bit platforms, long is 32 bits, so (long)UINT_MAX is less than
(long)SHT4X_MIN_POLL_INTERVAL, which means the clamping operation is
bogus. Fix this by clamping at INT_MAX, so that the upperbound is the
same on all platforms.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Link: https://lore.kernel.org/r/20220924101151.4168414-1-Jason@zx2c4.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: James Cowgill <james.cowgill@blaize.com>
Date: Mon Aug 1 20:04:18 2022 +0000
hwrng: arm-smccc-trng - fix NO_ENTROPY handling
[ Upstream commit 042b4b169c6fb9d4df268d66282d7302dd73d37b ]
The SMCCC_RET_TRNG_NO_ENTROPY switch arm is never used because the
NO_ENTROPY return value is negative and negative values are handled
above the switch by immediately returning.
Fix by handling errors using a default arm in the switch.
Fixes: 0888d04b47a1 ("hwrng: Add Arm SMCCC TRNG based driver")
Signed-off-by: James Cowgill <james.cowgill@blaize.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Kshitiz Varshney <kshitiz.varshney@nxp.com>
Date: Mon Aug 22 13:19:03 2022 +0200
hwrng: imx-rngc - Moving IRQ handler registering after imx_rngc_irq_mask_clear()
[ Upstream commit 10a2199caf437e893d9027d97700b3c6010048b7 ]
Issue:
While servicing interrupt, if the IRQ happens to be because of a SEED_DONE
due to a previous boot stage, you end up completing the completion
prematurely, hence causing kernel to crash while booting.
Fix:
Moving IRQ handler registering after imx_rngc_irq_mask_clear()
Fixes: 1d5449445bd0 (hwrng: mx-rngc - add a driver for Freescale RNGC)
Signed-off-by: Kshitiz Varshney <kshitiz.varshney@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Date: Tue Sep 27 16:56:44 2022 +0300
i2c: designware: Fix handling of real but unexpected device interrupts
commit 301c8f5c32c8fb79c67539bc23972dc3ef48024c upstream.
Commit c7b79a752871 ("mfd: intel-lpss: Add Intel Alder Lake PCH-S PCI
IDs") caused a regression on certain Gigabyte motherboards for Intel
Alder Lake-S where system crashes to NULL pointer dereference in
i2c_dw_xfer_msg() when system resumes from S3 sleep state ("deep").
I was able to debug the issue on Gigabyte Z690 AORUS ELITE and made
following notes:
- Issue happens when resuming from S3 but not when resuming from
"s2idle"
- PCI device 00:15.0 == i2c_designware.0 is already in D0 state when
system enters into pci_pm_resume_noirq() while all other i2c_designware
PCI devices are in D3. Devices were runtime suspended and in D3 prior
entering into suspend
- Interrupt comes after pci_pm_resume_noirq() when device interrupts are
re-enabled
- According to register dump the interrupt really comes from the
i2c_designware.0. Controller is enabled, I2C target address register
points to a one detectable I2C device address 0x60 and the
DW_IC_RAW_INTR_STAT register START_DET, STOP_DET, ACTIVITY and
TX_EMPTY bits are set indicating completed I2C transaction.
My guess is that the firmware uses this controller to communicate with
an on-board I2C device during resume but does not disable the controller
before giving control to an operating system.
I was told the UEFI update fixes this but never the less it revealed the
driver is not ready to handle TX_EMPTY (or RX_FULL) interrupt when device
is supposed to be idle and state variables are not set (especially the
dev->msgs pointer which may point to NULL or stale old data).
Introduce a new software status flag STATUS_ACTIVE indicating when the
controller is active in driver point of view. Now treat all interrupts
that occur when is not set as unexpected and mask all interrupts from
the controller.
Fixes: c7b79a752871 ("mfd: intel-lpss: Add Intel Alder Lake PCH-S PCI IDs")
Reported-by: Samuel Clark <slc2015@gmail.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215907
Cc: stable@vger.kernel.org # v5.12+
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Asmaa Mnebhi <asmaa@nvidia.com>
Date: Mon Sep 26 15:45:04 2022 -0400
i2c: mlxbf: support lock mechanism
[ Upstream commit 86067ccfa1424a26491542d6f6d7546d40b61a10 ]
Linux is not the only entity using the BlueField I2C busses so
support a lock mechanism provided by hardware to avoid issues
when multiple entities are trying to access the same bus.
The lock is acquired whenever written explicitely or the lock
register is read. So make sure it is always released at the end
of a successful or failed transaction.
Fixes: b5b5b32081cd206b (i2c: mlxbf: I2C SMBus driver for Mellanox BlueField SoC)
Reviewed-by: Khalil Blaiech <kblaiech@nvidia.com>
Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Randy Dunlap <rdunlap@infradead.org>
Date: Sat Sep 10 18:26:16 2022 -0700
ia64: export memory_add_physaddr_to_nid to fix cxl build error
[ Upstream commit 97c318bfbe84efded246e80428054f300042f110 ]
cxl_pmem.ko uses memory_add_physaddr_to_nid() but ia64 does not export it,
so this causes a build error:
ERROR: modpost: "memory_add_physaddr_to_nid" [drivers/cxl/cxl_pmem.ko] undefined!
Fix this by exporting that function.
Fixes: 8c2676a5870a ("hot-add-mem x86_64: memory_add_physaddr_to_nid node fixup")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Ben Widawsky <bwidawsk@kernel.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: linux-ia64@vger.kernel.org
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Keith Mannthey <kmannth@us.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Michal Jaron <michalx.jaron@intel.com>
Date: Thu Aug 18 13:32:33 2022 +0200
iavf: Fix race between iavf_close and iavf_reset_task
[ Upstream commit 11c12adcbc1598d91e73ab6ddfa41d25a01478ed ]
During stress tests with adding VF to namespace and changing vf's
trust there was a race between iavf_reset_task and iavf_close.
Sometimes when IAVF_FLAG_AQ_DISABLE_QUEUES from iavf_close was sent
to PF after reset and before IAVF_AQ_GET_CONFIG was sent then PF
returns error IAVF_NOT_SUPPORTED to disable queues request and
following requests. There is need to get_config before other
aq_required will be send but iavf_close clears all flags, if
get_config was not sent before iavf_close, then it will not be send
at all.
In case when IAVF_FLAG_AQ_GET_OFFLOAD_VLAN_V2_CAPS was sent before
IAVF_FLAG_AQ_DISABLE_QUEUES then there was rtnl_lock deadlock
between iavf_close and iavf_adminq_task until iavf_close timeouts
and disable queues was sent after iavf_close ends.
There was also a problem with sending delete/add filters.
Sometimes when filters was not yet added to PF and in
iavf_close all filters was set to remove there might be a try
to remove nonexistent filters on PF.
Add aq_required_tmp to save aq_required flags and send them after
disable_queues will be handled. Clear flags given to iavf_down
different than IAVF_FLAG_AQ_GET_CONFIG as this flag is necessary
to sent other aq_required. Remove some flags that we don't
want to send as we are in iavf_close and we want to disable
interface. Remove filters which was not yet sent and send del
filters flags only when there are filters to remove.
Signed-off-by: Michal Jaron <michalx.jaron@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Daisuke Matsuda <matsuda-daisuke@fujitsu.com>
Date: Wed Sep 21 17:08:43 2022 +0900
IB: Set IOVA/LENGTH on IB_MR in core/uverbs layers
[ Upstream commit 241f9a27e0fc0eaf23e3d52c8450f10648cd11f1 ]
Set 'iova' and 'length' on ib_mr in ib_uverbs and ib_core layers to let all
drivers have the members filled. Also, this commit removes redundancy in
the respective drivers.
Previously, commit 04c0a5fcfcf65 ("IB/uverbs: Set IOVA on IB MR in uverbs
layer") changed to set 'iova', but seems to have missed 'length' and the
ib_core layer at that time.
Fixes: 04c0a5fcfcf65 ("IB/uverbs: Set IOVA on IB MR in uverbs layer")
Signed-off-by: Daisuke Matsuda <matsuda-daisuke@fujitsu.com>
Link: https://lore.kernel.org/r/20220921080844.1616883-1-matsuda-daisuke@fujitsu.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jacob Keller <jacob.e.keller@intel.com>
Date: Wed Jul 27 16:15:57 2022 -0700
ice: set tx_tstamps when creating new Tx rings via ethtool
[ Upstream commit b3b173745c8cab1e24d6821488b60abed3acb24d ]
When the user changes the number of queues via ethtool, the driver
allocates new rings. This allocation did not initialize tx_tstamps. This
results in the tx_tstamps field being zero (due to kcalloc allocation), and
would result in a NULL pointer dereference when attempting a transmit
timestamp on the new ring.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Date: Sun Jun 26 13:29:23 2022 +0100
iio: ABI: Fix wrong format of differential capacitance channel ABI.
[ Upstream commit 1efc41035f1841acf0af2bab153158e27ce94f10 ]
in_ only occurs once in these attributes.
Fixes: 0baf29d658c7 ("staging:iio:documentation Add abi docs for capacitance adcs.")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220626122938.582107-3-jic23@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Nuno Sá <nuno.sa@analog.com>
Date: Mon Sep 12 10:12:21 2022 +0200
iio: adc: ad7923: fix channel readings for some variants
commit f4f43f01cff2f29779343ade755191afd2581c77 upstream.
Some of the supported devices have 4 or 2 LSB trailing bits that should
not be taken into account. Hence we need to shift these bits out which
fits perfectly on the scan type shift property. This change fixes both
raw and buffered reads.
Fixes: f2f7a449707e ("iio:adc:ad7923: Add support for the ad7904/ad7914/ad7924")
Fixes: 851644a60d20 ("iio: adc: ad7923: Add support for the ad7908/ad7918/ad7928")
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20220912081223.173584-2-nuno.sa@analog.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Claudiu Beznea <claudiu.beznea@microchip.com>
Date: Wed Aug 3 13:28:38 2022 +0300
iio: adc: at91-sama5d2_adc: check return status for pressure and touch
[ Upstream commit d84ace944a3b24529798dbae1340dea098473155 ]
Check return status of at91_adc_read_position() and
at91_adc_read_pressure() in at91_adc_read_info_raw().
Fixes: 6794e23fa3fe ("iio: adc: at91-sama5d2_adc: add support for oversampling resolution")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220803102855.2191070-3-claudiu.beznea@microchip.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Claudiu Beznea <claudiu.beznea@microchip.com>
Date: Wed Aug 3 13:28:40 2022 +0300
iio: adc: at91-sama5d2_adc: disable/prepare buffer on suspend/resume
[ Upstream commit 808175e21d9b7f866eda742e8970f27b78afe5db ]
In case triggered buffers are enabled while system is suspended they will
not work anymore after resume. For this call at91_adc_buffer_postdisable()
on suspend and at91_adc_buffer_prepare() on resume. On tests it has been
seen that at91_adc_buffer_postdisable() call is not necessary but it has
been kept because it also does the book keeping for DMA. On resume path
there is no need to call at91_adc_configure_touch() as it is embedded in
at91_adc_buffer_prepare().
Fixes: 073c662017f2f ("iio: adc: at91-sama5d2_adc: add support for DMA")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220803102855.2191070-5-claudiu.beznea@microchip.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Claudiu Beznea <claudiu.beznea@microchip.com>
Date: Wed Aug 3 13:28:37 2022 +0300
iio: adc: at91-sama5d2_adc: fix AT91_SAMA5D2_MR_TRACKTIM_MAX
[ Upstream commit bb73d5d9164c57c4bb916739a98e5cd8e0a5ed8c ]
All ADC HW versions handled by this driver (SAMA5D2, SAM9X60, SAMA7G5)
have MR.TRACKTIM on 4 bits. Fix AT91_SAMA5D2_MR_TRACKTIM_MAX to reflect
this.
Fixes: 27e177190891 ("iio:adc:at91_adc8xx: introduce new atmel adc driver")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220803102855.2191070-2-claudiu.beznea@microchip.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Claudiu Beznea <claudiu.beznea@microchip.com>
Date: Wed Aug 3 13:28:39 2022 +0300
iio: adc: at91-sama5d2_adc: lock around oversampling and sample freq
[ Upstream commit 9780a23ed5a0a0a63683e078f576719a98d4fb70 ]
.read_raw()/.write_raw() could be called asynchronously from user space
or other in kernel drivers. Without locking on st->lock these could be
called asynchronously while there is a conversion in progress. Read will
be harmless but changing registers while conversion is in progress may
lead to inconsistent results. Thus, to avoid this lock st->lock.
Fixes: 27e177190891 ("iio:adc:at91_adc8xx: introduce new atmel adc driver")
Fixes: 6794e23fa3fe ("iio: adc: at91-sama5d2_adc: add support for oversampling resolution")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220803102855.2191070-4-claudiu.beznea@microchip.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Michael Hennerich <michael.hennerich@analog.com>
Date: Tue Sep 13 09:34:12 2022 +0200
iio: dac: ad5593r: Fix i2c read protocol requirements
commit 558a25f903b4af6361b7fbeea08a6446a0745653 upstream.
For reliable operation across the full range of supported
interface rates, the AD5593R needs a STOP condition between
address write, and data read (like show in the datasheet Figure 40)
so in turn i2c_smbus_read_word_swapped cannot be used.
While at it, a simple helper was added to make the code simpler.
Fixes: 56ca9db862bf ("iio: dac: Add support for the AD5592R/AD5593R ADCs/DACs")
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220913073413.140475-2-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Nuno Sá <nuno.sa@analog.com>
Date: Fri Jul 15 14:28:50 2022 +0200
iio: inkern: fix return value in devm_of_iio_channel_get_by_name()
[ Upstream commit 9e878dbc0e8322f8b2f5ab0093c1e89926362dbe ]
of_iio_channel_get_by_name() can either return NULL or an error pointer
so that only doing IS_ERR() is not enough. Fix it by checking the NULL
pointer case and return -ENODEV in that case. Note this is done like this
so that users of the function (which only check for error pointers) do
not need to be changed. This is not ideal since we are losing error codes
and as such, in a follow up change, things will be unified so that
of_iio_channel_get_by_name() only returns error codes.
Fixes: 6e39b145cef7 ("iio: provide of_iio_channel_get_by_name() and devm_ version it")
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220715122903.332535-3-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Nuno Sá <nuno.sa@analog.com>
Date: Fri Jul 15 14:28:49 2022 +0200
iio: inkern: only release the device node when done with it
[ Upstream commit 79c3e84874c7d14f04ad58313b64955a0d2e9437 ]
'of_node_put()' can potentially release the memory pointed to by
'iiospec.np' which would leave us with an invalid pointer (and we would
still pass it in 'of_xlate()'). Note that it is not guaranteed for the
of_node lifespan to be attached to the device (to which is attached)
lifespan so that there is (even though very unlikely) the possibility
for the node to be freed while the device is still around. Thus, as there
are indeed some of_xlate users which do access the node, a race is indeed
possible.
As such, we can only release the node after we are done with it.
Fixes: 17d82b47a215d ("iio: Add OF support")
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20220715122903.332535-2-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Date: Mon Aug 15 09:16:47 2022 +0000
iio: ltc2497: Fix reading conversion results
commit 7f4f1096d5921f5d90547596f9ce80e0b924f887 upstream.
After the result of the previous conversion is read the chip
automatically starts a new conversion and doesn't accept new i2c
transfers until this conversion is completed which makes the function
return failure.
So add an early return iff the programming of the new address isn't
needed. Note this will not fix the problem in general, but all cases
that are currently used. Once this changes we get the failure back, but
this can be addressed when the need arises.
Fixes: 69548b7c2c4f ("iio: adc: ltc2497: split protocol independent part in a separate module ")
Reported-by: Meng Li <Meng.Li@windriver.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Tested-by: Denys Zagorui <dzagorui@cisco.com>
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220815091647.1523532-1-dzagorui@cisco.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jakob Hauser <jahau@rocketmail.com>
Date: Fri Aug 12 23:54:06 2022 +0200
iio: magnetometer: yas530: Change data type of hard_offsets to signed
[ Upstream commit e137fafc8985cf152a4bb6f18ae83ebb06816df1 ]
The "hard_offsets" are currently unsigned u8 but they should be signed as they
can get negative. They are signed in function yas5xx_meaure_offsets() and in the
Yamaha drivers [1][2].
[1] https://github.com/NovaFusion/android_kernel_samsung_golden/blob/cm-12.1/drivers/sensor/compass/yas.h#L156
[2] https://github.com/msm8916-mainline/android_kernel_qcom_msm8916/blob/GT-I9195I/drivers/iio/magnetometer/yas_mag_drv-yas532.c#L91
Fixes: de8860b1ed47 ("iio: magnetometer: Add driver for Yamaha YAS530")
Signed-off-by: Jakob Hauser <jahau@rocketmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/40f052bf6491457d0c5c0ed4c3534dc6fa251c3c.1660337264.git.jahau@rocketmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Eddie James <eajames@linux.ibm.com>
Date: Thu Sep 15 14:57:18 2022 -0500
iio: pressure: dps310: Refactor startup procedure
commit c2329717bdd3fa62f8a2f3d8d85ad0bee4556bd7 upstream.
Move the startup procedure into a function, and correct a missing
check on the return code for writing the PRS_CFG register.
Cc: <stable@vger.kernel.org>
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220915195719.136812-2-eajames@linux.ibm.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Eddie James <eajames@linux.ibm.com>
Date: Thu Sep 15 14:57:19 2022 -0500
iio: pressure: dps310: Reset chip after timeout
commit 7b4ab4abcea4c0c10b25187bf2569e5a07e9a20c upstream.
The DPS310 chip has been observed to get "stuck" such that pressure
and temperature measurements are never indicated as "ready" in the
MEAS_CFG register. The only solution is to reset the device and try
again. In order to avoid continual failures, use a boolean flag to
only try the reset after timeout once if errors persist.
Fixes: ba6ec48e76bc ("iio: Add driver for Infineon DPS310")
Cc: <stable@vger.kernel.org>
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220915195719.136812-3-eajames@linux.ibm.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Mimi Zohar <zohar@linux.ibm.com>
Date: Wed Aug 17 17:18:42 2022 -0400
ima: fix blocking of security.ima xattrs of unsupported algorithms
[ Upstream commit 5926586f291b53cb8a0c9631fc19489be1186e2d ]
Limit validating the hash algorithm to just security.ima xattr, not
the security.evm xattr or any of the protected EVM security xattrs,
nor posix acls.
Fixes: 50f742dd9147 ("IMA: block writes of the security.ima xattr with unsupported algorithms")
Reported-by: Christian Brauner <brauner@kernel.org>
Acked-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Rafael Mendonca <rafaelmendsr@gmail.com>
Date: Wed Oct 19 22:47:09 2022 -0300
io-wq: Fix memory leak in worker creation
commit 996d3efeb091c503afd3ee6b5e20eabf446fd955 upstream.
If the CPU mask allocation for a node fails, then the memory allocated for
the 'io_wqe' struct of the current node doesn't get freed on the error
handling path, since it has not yet been added to the 'wqes' array.
This was spotted when fuzzing v6.1-rc1 with Syzkaller:
BUG: memory leak
unreferenced object 0xffff8880093d5000 (size 1024):
comm "syz-executor.2", pid 7701, jiffies 4295048595 (age 13.900s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<00000000cb463369>] __kmem_cache_alloc_node+0x18e/0x720
[<00000000147a3f9c>] kmalloc_node_trace+0x2a/0x130
[<000000004e107011>] io_wq_create+0x7b9/0xdc0
[<00000000c38b2018>] io_uring_alloc_task_context+0x31e/0x59d
[<00000000867399da>] __io_uring_add_tctx_node.cold+0x19/0x1ba
[<000000007e0e7a79>] io_uring_setup.cold+0x1b80/0x1dce
[<00000000b545e9f6>] __x64_sys_io_uring_setup+0x5d/0x80
[<000000008a8a7508>] do_syscall_64+0x5d/0x90
[<000000004ac08bec>] entry_SYSCALL_64_after_hwframe+0x63/0xcd
Fixes: 0e03496d1967 ("io-wq: use private CPU mask")
Cc: stable@vger.kernel.org
Signed-off-by: Rafael Mendonca <rafaelmendsr@gmail.com>
Link: https://lore.kernel.org/r/20221020014710.902201-1-rafaelmendsr@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Pavel Begunkov <asml.silence@gmail.com>
Date: Sun Oct 16 22:42:54 2022 +0100
io_uring/af_unix: defer registered files gc to io_uring release
[ upstream commit 0091bfc81741b8d3aeb3b7ab8636f911b2de6e80 ]
Instead of putting io_uring's registered files in unix_gc() we want it
to be done by io_uring itself. The trick here is to consider io_uring
registered files for cycle detection but not actually putting them down.
Because io_uring can't register other ring instances, this will remove
all refs to the ring file triggering the ->release path and clean up
with io_ring_ctx_free().
Cc: stable@vger.kernel.org
Fixes: 6b06314c47e1 ("io_uring: add file set registration")
Reported-and-tested-by: David Bouman <dbouman03@gmail.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
[axboe: add kerneldoc comment to skb, fold in skb leak fix]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Pavel Begunkov <asml.silence@gmail.com>
Date: Thu Sep 29 22:23:18 2022 +0100
io_uring/net: don't update msg_name if not provided
commit 6f10ae8a155446248055c7ddd480ef40139af788 upstream.
io_sendmsg_copy_hdr() may clear msg->msg_name if the userspace didn't
provide it, we should retain NULL in this case.
Cc: stable@vger.kernel.org
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/97d49f61b5ec76d0900df658cfde3aa59ff22121.1664486545.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Pavel Begunkov <asml.silence@gmail.com>
Date: Sun Oct 16 22:42:57 2022 +0100
io_uring/rw: fix error'ed retry return values
[ upstream commit 62bb0647b14646fa6c9aa25ecdf67ad18f13523c ]
Kernel test robot reports that we test negativity of an unsigned in
io_fixup_rw_res() after a recent change, which masks error codes and
messes up the return value in case I/O is re-retried and failed with
an error.
Fixes: 4d9cb92ca41dd ("io_uring/rw: fix short rw error handling")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/9754a0970af1861e7865f9014f735c70dc60bf79.1663071587.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Pavel Begunkov <asml.silence@gmail.com>
Date: Sun Oct 16 22:42:56 2022 +0100
io_uring/rw: fix short rw error handling
[ upstream commit 89473c1a9205760c4fa6d158058da7b594a815f0 ]
We have a couple of problems, first reports of unexpected link breakage
for reads when cqe->res indicates that the IO was done in full. The
reason here is partial IO with retries.
TL;DR; we compare the result in __io_complete_rw_common() against
req->cqe.res, but req->cqe.res doesn't store the full length but rather
the length left to be done. So, when we pass the full corrected result
via kiocb_done() -> __io_complete_rw_common(), it fails.
The second problem is that we don't try to correct res in
io_complete_rw(), which, for instance, might be a problem for O_DIRECT
but when a prefix of data was cached in the page cache. We also
definitely don't want to pass a corrected result into io_rw_done().
The fix here is to leave __io_complete_rw_common() alone, always pass
not corrected result into it and fix it up as the last step just before
actually finishing the I/O.
Cc: stable@vger.kernel.org
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Pavel Begunkov <asml.silence@gmail.com>
Date: Sun Oct 16 22:42:58 2022 +0100
io_uring/rw: fix unexpected link breakage
[ upstream commit bf68b5b34311ee57ed40749a1257a30b46127556 ]
req->cqe.res is set in io_read() to the amount of bytes left to be done,
which is used to figure out whether to fail a read or not. However,
io_read() may do another without returning, and we stash the previous
value into ->bytes_done but forget to update cqe.res. Then we ask a read
to do strictly less than cqe.res but expect the return to be exactly
cqe.res.
Fix the bug by updating cqe.res for retries.
Cc: stable@vger.kernel.org
Reported-and-Tested-by: Beld Zhang <beldzhang@gmail.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/3a1088440c7be98e5800267af922a67da0ef9f13.1664235732.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Pavel Begunkov <asml.silence@gmail.com>
Date: Sun Oct 16 22:42:55 2022 +0100
io_uring: correct pinned_vm accounting
[ upstream commit 42b6419d0aba47c5d8644cdc0b68502254671de5 ]
->mm_account should be released only after we free all registered
buffers, otherwise __io_sqe_buffers_unregister() will see a NULL
->mm_account and skip locked_vm accounting.
Cc: <Stable@vger.kernel.org>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/6d798f65ed4ab8db3664c4d3397d4af16ca98846.1664849932.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Yicong Yang <yangyicong@hisilicon.com>
Date: Tue Aug 16 19:44:10 2022 +0800
iommu/arm-smmu-v3: Make default domain type of HiSilicon PTT device to identity
[ Upstream commit 24b6c7798a0122012ca848ea0d25e973334266b0 ]
The DMA operations of HiSilicon PTT device can only work properly with
identical mappings. So add a quirk for the device to force the domain
as passthrough.
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/20220816114414.4092-2-yangyicong@huawei.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Robin Murphy <robin.murphy@arm.com>
Date: Tue Sep 13 12:47:20 2022 +0100
iommu/iova: Fix module config properly
[ Upstream commit 4f58330fcc8482aa90674e1f40f601e82f18ed4a ]
IOMMU_IOVA is intended to be an optional library for users to select as
and when they desire. Since it can be a module now, this means that
built-in code which has chosen not to select it should not fail to link
if it happens to have selected as a module by someone else. Replace
IS_ENABLED() with IS_REACHABLE() to do the right thing.
CC: Thierry Reding <thierry.reding@gmail.com>
Reported-by: John Garry <john.garry@huawei.com>
Fixes: 15bbdec3931e ("iommu: Make the iova library a module")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/548c2f683ca379aface59639a8f0cccc3a1ac050.1663069227.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dan Carpenter <error27@gmail.com>
Date: Thu Aug 4 17:32:39 2022 +0300
iommu/omap: Fix buffer overflow in debugfs
[ Upstream commit 184233a5202786b20220acd2d04ddf909ef18f29 ]
There are two issues here:
1) The "len" variable needs to be checked before the very first write.
Otherwise if omap2_iommu_dump_ctx() with "bytes" less than 32 it is a
buffer overflow.
2) The snprintf() function returns the number of bytes that *would* have
been copied if there were enough space. But we want to know the
number of bytes which were *actually* copied so use scnprintf()
instead.
Fixes: bd4396f09a4a ("iommu/omap: Consolidate OMAP IOMMU modules")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/YuvYh1JbE3v+abd5@kili
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ye Bin <yebin10@huawei.com>
Date: Sat Sep 17 17:38:05 2022 +0800
jbd2: add miss release buffer head in fc_do_one_pass()
commit dfff66f30f66b9524b661f311bbed8ff3d2ca49f upstream.
In fc_do_one_pass() miss release buffer head after use which will lead
to reference count leak.
Cc: stable@kernel.org
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220917093805.1782845-1-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Ye Bin <yebin10@huawei.com>
Date: Wed Sep 14 18:08:11 2022 +0800
jbd2: fix potential buffer head reference count leak
commit e0d5fc7a6d80ac2406c7dfc6bb625201d0250a8a upstream.
As in 'jbd2_fc_wait_bufs' if buffer isn't uptodate, will return -EIO without
update 'journal->j_fc_off'. But 'jbd2_fc_release_bufs' will release buffer head
from ‘j_fc_off - 1’ if 'bh' is NULL will terminal release which will lead to
buffer head buffer head reference count leak.
To solve above issue, update 'journal->j_fc_off' before return -EIO.
Cc: stable@kernel.org
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220914100812.1414768-2-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Ye Bin <yebin10@huawei.com>
Date: Wed Sep 14 18:08:12 2022 +0800
jbd2: fix potential use-after-free in jbd2_fc_wait_bufs
commit 243d1a5d505d0b0460c9af0ad56ed4a56ef0bebd upstream.
In 'jbd2_fc_wait_bufs' use 'bh' after put buffer head reference count
which may lead to use-after-free.
So judge buffer if uptodate before put buffer head reference count.
Cc: stable@kernel.org
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220914100812.1414768-3-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Andrew Perepechko <anserper@ya.ru>
Date: Wed Sep 7 19:59:59 2022 +0300
jbd2: wake up journal waiters in FIFO order, not LIFO
commit 34fc8768ec6089565d6d73bad26724083cecf7bd upstream.
LIFO wakeup order is unfair and sometimes leads to a journal
user not being able to get a journal handle for hundreds of
transactions in a row.
FIFO wakeup can make things more fair.
Cc: stable@kernel.org
Signed-off-by: Alexey Lyashkov <alexey.lyashkov@gmail.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220907165959.1137482-1-alexey.lyashkov@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Masahiro Yamada <masahiroy@kernel.org>
Date: Sun Aug 7 09:48:09 2022 +0900
kbuild: remove the target in signal traps when interrupted
[ Upstream commit a7f3257da8a86b96fb9bf1bba40ae0bbd7f1885a ]
When receiving some signal, GNU Make automatically deletes the target if
it has already been changed by the interrupted recipe.
If the target is possibly incomplete due to interruption, it must be
deleted so that it will be remade from scratch on the next run of make.
Otherwise, the target would remain corrupted permanently because its
timestamp had already been updated.
Thanks to this behavior of Make, you can stop the build any time by
pressing Ctrl-C, and just run 'make' to resume it.
Kbuild also relies on this feature, but it is equivalently important
for any build systems that make decisions based on timestamps (if you
want to support Ctrl-C reliably).
However, this does not always work as claimed; Make immediately dies
with Ctrl-C if its stderr goes into a pipe.
[Test Makefile]
foo:
echo hello > $@
sleep 3
echo world >> $@
[Test Result]
$ make # hit Ctrl-C
echo hello > foo
sleep 3
^Cmake: *** Deleting file 'foo'
make: *** [Makefile:3: foo] Interrupt
$ make 2>&1 | cat # hit Ctrl-C
echo hello > foo
sleep 3
^C$ # 'foo' is often left-over
The reason is because SIGINT is sent to the entire process group.
In this example, SIGINT kills 'cat', and 'make' writes the message to
the closed pipe, then dies with SIGPIPE before cleaning the target.
A typical bad scenario (as reported by [1], [2]) is to save build log
by using the 'tee' command:
$ make 2>&1 | tee log
This can be problematic for any build systems based on Make, so I hope
it will be fixed in GNU Make. The maintainer of GNU Make stated this is
a long-standing issue and difficult to fix [3]. It has not been fixed
yet as of writing.
So, we cannot rely on Make cleaning the target. We can do it by
ourselves, in signal traps.
As far as I understand, Make takes care of SIGHUP, SIGINT, SIGQUIT, and
SITERM for the target removal. I added the traps for them, and also for
SIGPIPE just in case cmd_* rule prints something to stdout or stderr
(but I did not observe an actual case where SIGPIPE was triggered).
[Note 1]
The trap handler might be worth explaining.
rm -f $@; trap - $(sig); kill -s $(sig) $$
This lets the shell kill itself by the signal it caught, so the parent
process can tell the child has exited on the signal. Generally, this is
a proper manner for handling signals, in case the calling program (like
Bash) may monitor WIFSIGNALED() and WTERMSIG() for WCE although this may
not be a big deal here because GNU Make handles SIGHUP, SIGINT, SIGQUIT
in WUE and SIGTERM in IUE.
IUE - Immediate Unconditional Exit
WUE - Wait and Unconditional Exit
WCE - Wait and Cooperative Exit
For details, see "Proper handling of SIGINT/SIGQUIT" [4].
[Note 2]
Reverting 392885ee82d3 ("kbuild: let fixdep directly write to .*.cmd
files") would directly address [1], but it only saves if_changed_dep.
As reported in [2], all commands that use redirection can potentially
leave an empty (i.e. broken) target.
[Note 3]
Another (even safer) approach might be to always write to a temporary
file, and rename it to $@ at the end of the recipe.
<command> > $(tmp-target)
mv $(tmp-target) $@
It would require a lot of Makefile changes, and result in ugly code,
so I did not take it.
[Note 4]
A little more thoughts about a pattern rule with multiple targets (or
a grouped target).
%.x %.y: %.z
<recipe>
When interrupted, GNU Make deletes both %.x and %.y, while this solution
only deletes $@. Probably, this is not a big deal. The next run of make
will execute the rule again to create $@ along with the other files.
[1]: https://lore.kernel.org/all/YLeot94yAaM4xbMY@gmail.com/
[2]: https://lore.kernel.org/all/20220510221333.2770571-1-robh@kernel.org/
[3]: https://lists.gnu.org/archive/html/help-make/2021-06/msg00001.html
[4]: https://www.cons.org/cracauer/sigint.html
Fixes: 392885ee82d3 ("kbuild: let fixdep directly write to .*.cmd files")
Reported-by: Ingo Molnar <mingo@kernel.org>
Reported-by: Rob Herring <robh@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Date: Fri Sep 16 14:41:12 2022 +0200
kbuild: rpm-pkg: fix breakage when V=1 is used
[ Upstream commit 2e07005f4813a9ff6e895787e0c2d1fea859b033 ]
Doing make V=1 binrpm-pkg results in:
Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.EgV6qJ
+ umask 022
+ cd .
+ /bin/rm -rf /home/scgl/rpmbuild/BUILDROOT/kernel-6.0.0_rc5+-1.s390x
+ /bin/mkdir -p /home/scgl/rpmbuild/BUILDROOT
+ /bin/mkdir /home/scgl/rpmbuild/BUILDROOT/kernel-6.0.0_rc5+-1.s390x
+ mkdir -p /home/scgl/rpmbuild/BUILDROOT/kernel-6.0.0_rc5+-1.s390x/boot
+ make -f ./Makefile image_name
+ cp test -e include/generated/autoconf.h -a -e include/config/auto.conf || ( \ echo >&2; \ echo >&2 " ERROR: Kernel configuration is invalid."; \ echo >&2 " include/generated/autoconf.h or include/config/auto.conf are missing.";\ echo >&2 " Run 'make oldconfig && make prepare' on kernel src to fix it."; \ echo >&2 ; \ /bin/false) arch/s390/boot/bzImage /home/scgl/rpmbuild/BUILDROOT/kernel-6.0.0_rc5+-1.s390x/boot/vmlinuz-6.0.0-rc5+
cp: invalid option -- 'e'
Try 'cp --help' for more information.
error: Bad exit status from /var/tmp/rpm-tmp.EgV6qJ (%install)
Because the make call to get the image name is verbose and prints
additional information.
Fixes: 993bdde94547 ("kbuild: add image_name to no-sync-config-targets")
Signed-off-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Masahiro Yamada <masahiroy@kernel.org>
Date: Wed Oct 5 01:29:04 2022 +0900
Kconfig.debug: add toolchain checks for DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT
commit bb1435f3f575b5213eaf27434efa3971f51c01de upstream.
CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT does not give explicit
-gdwarf-* flag. The actual DWARF version is up to the toolchain.
The combination of GCC and GAS works fine, and Clang with the integrated
assembler is good too.
The combination of Clang and GAS is tricky, but at least, the -g flag
works for Clang <=13, which defaults to DWARF v4.
Clang 14 switched its default to DWARF v5.
Now, CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT has the same issue as
addressed by commit 98cd6f521f10 ("Kconfig: allow explicit opt in to
DWARF v5").
CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y for Clang >= 14 and
GAS < 2.35 produces a ton of errors like follows:
/tmp/main-c2741c.s: Assembler messages:
/tmp/main-c2741c.s:109: Error: junk at end of line, first unrecognized character is `"'
/tmp/main-c2741c.s:109: Error: file number less than one
Add 'depends on' to check toolchains.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
[nathan: Fix conflict due to lack of f9b3cd24578401e]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Masahiro Yamada <masahiroy@kernel.org>
Date: Wed Oct 5 01:29:03 2022 +0900
Kconfig.debug: simplify the dependency of DEBUG_INFO_DWARF4/5
commit 4f001a21080ff2e2f0e1c3692f5e119aedbb3bc1 upstream.
Commit c0a5c81ca9be ("Kconfig.debug: drop GCC 5+ version check for
DWARF5") could have cleaned up the code a bit more.
"CC_IS_CLANG &&" is unneeded. No functional change is intended.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
[nathan: Only apply to DWARF5, as 5.15 does not have 32ef9e5054ec032]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Mark Brown <broonie@kernel.org>
Date: Mon Aug 29 17:06:56 2022 +0100
kselftest/arm64: Fix validatation termination record after EXTRA_CONTEXT
[ Upstream commit 5c152c2f66f9368394b89ac90dc7483476ef7b88 ]
When arm64 signal context data overflows the base struct sigcontext it gets
placed in an extra buffer pointed to by a record of type EXTRA_CONTEXT in
the base struct sigcontext which is required to be the last record in the
base struct sigframe. The current validation code attempts to check this
by using GET_RESV_NEXT_HEAD() to step forward from the current record to
the next but that is a macro which assumes it is being provided with a
struct _aarch64_ctx and uses the size there to skip forward to the next
record. Instead validate_extra_context() passes it a struct extra_context
which has a separate size field. This compiles but results in us trying
to validate a termination record in completely the wrong place, at best
failing validation and at worst just segfaulting. Fix this by passing
the struct _aarch64_ctx we meant to into the macro.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220829160703.874492-4-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Namjae Jeon <linkinjeon@kernel.org>
Date: Thu Sep 22 23:35:43 2022 +0900
ksmbd: fix endless loop when encryption for response fails
commit 360c8ee6fefdb496fffd2c18bb9a96a376a1a804 upstream.
If ->encrypt_resp return error, goto statement cause endless loop.
It send an error response immediately after removing it.
Fixes: 0626e6641f6b ("cifsd: add server handler for central processing and tranport layers")
Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Mickaël Salaün <mic@digikod.net>
Date: Thu Sep 29 12:04:47 2022 +0200
ksmbd: Fix user namespace mapping
commit 7c88c1e0ab1704bacb751341ee6431c3be34b834 upstream.
A kernel daemon should not rely on the current thread, which is unknown
and might be malicious. Before this security fix,
ksmbd_override_fsids() didn't correctly override FS UID/GID which means
that arbitrary user space threads could trick the kernel to impersonate
arbitrary users or groups for file system access checks, leading to
file system access bypass.
This was found while investigating truncate support for Landlock:
https://lore.kernel.org/r/CAKYAXd8fpMJ7guizOjHgxEyyjoUwPsx3jLOPZP=wPYcbhkVXqA@mail.gmail.com
Fixes: e2f34481b24d ("cifsd: add server-side procedures for SMB3")
Cc: Hyunchul Lee <hyc.lee@gmail.com>
Cc: Steve French <smfrench@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Link: https://lore.kernel.org/r/20220929100447.108468-1-mic@digikod.net
Acked-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Date: Mon Sep 26 11:36:30 2022 +0800
ksmbd: Fix wrong return value and message length check in smb2_ioctl()
commit b1763d265af62800ec96eeb79803c4c537dcef3a upstream.
Commit c7803b05f74b ("smb3: fix ksmbd bigendian bug in oplock
break, and move its struct to smbfs_common") use the defination
of 'struct validate_negotiate_info_req' in smbfs_common, the
array length of 'Dialects' changed from 1 to 4, but the protocol
does not require the client to send all 4. This lead the request
which satisfied with protocol and server to fail.
So just ensure the request payload has the 'DialectCount' in
smb2_ioctl(), then fsctl_validate_negotiate_info() will use it
to validate the payload length and each dialect.
Also when the {in, out}_buf_len is less than the required, should
goto out to initialize the status in the response header.
Fixes: f7db8fd03a4b ("ksmbd: add validation in smb2_ioctl")
Cc: stable@vger.kernel.org
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Sean Christopherson <seanjc@google.com>
Date: Tue Aug 30 15:37:21 2022 +0200
KVM: nVMX: Don't propagate vmcs12's PERF_GLOBAL_CTRL settings to vmcs02
commit def9d705c05eab3fdedeb10ad67907513b12038e upstream.
Don't propagate vmcs12's VM_ENTRY_LOAD_IA32_PERF_GLOBAL_CTRL to vmcs02.
KVM doesn't disallow L1 from using VM_ENTRY_LOAD_IA32_PERF_GLOBAL_CTRL
even when KVM itself doesn't use the control, e.g. due to the various
CPU errata that where the MSR can be corrupted on VM-Exit.
Preserve KVM's (vmcs01) setting to hopefully avoid having to toggle the
bit in vmcs02 at a later point. E.g. if KVM is loading PERF_GLOBAL_CTRL
when running L1, then odds are good KVM will also load the MSR when
running L2.
Fixes: 8bf00a529967 ("KVM: VMX: add support for switching of PERF_GLOBAL_CTRL")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20220830133737.1539624-18-vkuznets@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Sean Christopherson <seanjc@google.com>
Date: Tue Aug 30 23:15:48 2022 +0000
KVM: nVMX: Unconditionally purge queued/injected events on nested "exit"
commit d953540430c5af57f5de97ea9e36253908204027 upstream.
Drop pending exceptions and events queued for re-injection when leaving
nested guest mode, even if the "exit" is due to VM-Fail, SMI, or forced
by host userspace. Failure to purge events could result in an event
belonging to L2 being injected into L1.
This _should_ never happen for VM-Fail as all events should be blocked by
nested_run_pending, but it's possible if KVM, not the L1 hypervisor, is
the source of VM-Fail when running vmcs02.
SMI is a nop (barring unknown bugs) as recognition of SMI and thus entry
to SMM is blocked by pending exceptions and re-injected events.
Forced exit is definitely buggy, but has likely gone unnoticed because
userspace probably follows the forced exit with KVM_SET_VCPU_EVENTS (or
some other ioctl() that purges the queue).
Fixes: 4f350c6dbcb9 ("kvm: nVMX: Handle deferred early VMLAUNCH/VMRESUME failure properly")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20220830231614.3580124-2-seanjc@google.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Sean Christopherson <seanjc@google.com>
Date: Tue Aug 30 23:15:49 2022 +0000
KVM: VMX: Drop bits 31:16 when shoving exception error code into VMCS
commit eba9799b5a6efe2993cf92529608e4aa8163d73b upstream.
Deliberately truncate the exception error code when shoving it into the
VMCS (VM-Entry field for vmcs01 and vmcs02, VM-Exit field for vmcs12).
Intel CPUs are incapable of handling 32-bit error codes and will never
generate an error code with bits 31:16, but userspace can provide an
arbitrary error code via KVM_SET_VCPU_EVENTS. Failure to drop the bits
on exception injection results in failed VM-Entry, as VMX disallows
setting bits 31:16. Setting the bits on VM-Exit would at best confuse
L1, and at worse induce a nested VM-Entry failure, e.g. if L1 decided to
reinject the exception back into L2.
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20220830231614.3580124-3-seanjc@google.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Michal Luczaj <mhal@rbox.co>
Date: Mon Aug 22 00:06:47 2022 +0200
KVM: x86/emulator: Fix handing of POP SS to correctly set interruptibility
commit 6aa5c47c351b22c21205c87977c84809cd015fcf upstream.
The emulator checks the wrong variable while setting the CPU
interruptibility state, the target segment is embedded in the instruction
opcode, not the ModR/M register. Fix the condition.
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Fixes: a5457e7bcf9a ("KVM: emulate: POP SS triggers a MOV SS shadow too")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20220821215900.1419215-1-mhal@rbox.co
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Date: Mon Aug 15 10:02:27 2022 +0200
leds: lm3601x: Don't use mutex after it was destroyed
[ Upstream commit 32f7eed0c763a9b89f6b357ec54b48398fc7b99e ]
The mutex might still be in use until the devm cleanup callback
devm_led_classdev_flash_release() is called. This only happens some time
after lm3601x_remove() completed.
Fixes: e63a744871a3 ("leds: lm3601x: Convert class registration to device managed")
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Nathan Chancellor <nathan@kernel.org>
Date: Fri Oct 14 13:42:11 2022 -0700
lib/Kconfig.debug: Add check for non-constant .{s,u}leb128 support to DWARF5
commit 0a6de78cff600cb991f2a1b7ed376935871796a0 upstream.
When building with a RISC-V kernel with DWARF5 debug info using clang
and the GNU assembler, several instances of the following error appear:
/tmp/vgettimeofday-48aa35.s:2963: Error: non-constant .uleb128 is not supported
Dumping the .s file reveals these .uleb128 directives come from
.debug_loc and .debug_ranges:
.Ldebug_loc0:
.byte 4 # DW_LLE_offset_pair
.uleb128 .Lfunc_begin0-.Lfunc_begin0 # starting offset
.uleb128 .Ltmp1-.Lfunc_begin0 # ending offset
.byte 1 # Loc expr size
.byte 90 # DW_OP_reg10
.byte 0 # DW_LLE_end_of_list
.Ldebug_ranges0:
.byte 4 # DW_RLE_offset_pair
.uleb128 .Ltmp6-.Lfunc_begin0 # starting offset
.uleb128 .Ltmp27-.Lfunc_begin0 # ending offset
.byte 4 # DW_RLE_offset_pair
.uleb128 .Ltmp28-.Lfunc_begin0 # starting offset
.uleb128 .Ltmp30-.Lfunc_begin0 # ending offset
.byte 0 # DW_RLE_end_of_list
There is an outstanding binutils issue to support a non-constant operand
to .sleb128 and .uleb128 in GAS for RISC-V but there does not appear to
be any movement on it, due to concerns over how it would work with
linker relaxation.
To avoid these build errors, prevent DWARF5 from being selected when
using clang and an assembler that does not have support for these symbol
deltas, which can be easily checked in Kconfig with as-instr plus the
small test program from the dwz test suite from the binutils issue.
Link: https://sourceware.org/bugzilla/show_bug.cgi?id=27215
Link: https://github.com/ClangBuiltLinux/linux/issues/1719
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
[nathan: Fix conflicts due to lack of f9b3cd24578401e]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Date: Wed Oct 26 12:35:57 2022 +0200
Linux 5.15.75
Link: https://lore.kernel.org/r/20221024113044.976326639@linuxfoundation.org
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Allen Pais <apais@linux.microsoft.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Kelsey Steele <kelseysteele@linux.microsoft.com>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Slade Watkins <srw@sladewatkins.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Rik van Riel <riel@surriel.com>
Date: Mon Aug 8 15:00:19 2022 -0400
livepatch: fix race between fork and KLP transition
commit 747f7a2901174c9afa805dddfb7b24db6f65e985 upstream.
The KLP transition code depends on the TIF_PATCH_PENDING and
the task->patch_state to stay in sync. On a normal (forward)
transition, TIF_PATCH_PENDING will be set on every task in
the system, while on a reverse transition (after a failed
forward one) first TIF_PATCH_PENDING will be cleared from
every task, followed by it being set on tasks that need to
be transitioned back to the original code.
However, the fork code copies over the TIF_PATCH_PENDING flag
from the parent to the child early on, in dup_task_struct and
setup_thread_stack. Much later, klp_copy_process will set
child->patch_state to match that of the parent.
However, the parent's patch_state may have been changed by KLP loading
or unloading since it was initially copied over into the child.
This results in the KLP code occasionally hitting this warning in
klp_complete_transition:
for_each_process_thread(g, task) {
WARN_ON_ONCE(test_tsk_thread_flag(task, TIF_PATCH_PENDING));
task->patch_state = KLP_UNDEFINED;
}
Set, or clear, the TIF_PATCH_PENDING flag in the child task
depending on whether or not it is needed at the time
klp_copy_process is called, at a point in copy_process where the
tasklist_lock is held exclusively, preventing races with the KLP
code.
The KLP code does have a few places where the state is changed
without the tasklist_lock held, but those should not cause
problems because klp_update_patch_state(current) cannot be
called while the current task is in the middle of fork,
klp_check_and_switch_task() which is called under the pi_lock,
which prevents rescheduling, and manipulation of the patch
state of idle tasks, which do not fork.
This should prevent this warning from triggering again in the
future, and close the race for both normal and reverse transitions.
Signed-off-by: Rik van Riel <riel@surriel.com>
Reported-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Fixes: d83a7cb375ee ("livepatch: change to a per-task consistency model")
Cc: stable@kernel.org
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20220808150019.03d6a67b@imladris.surriel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Amir Goldstein <amir73il@gmail.com>
Date: Tue Aug 16 17:53:17 2022 +0300
locks: fix TOCTOU race when granting write lease
[ Upstream commit d6da19c9cace63290ccfccb1fc35151ffefc0bec ]
Thread A trying to acquire a write lease checks the value of i_readcount
and i_writecount in check_conflicting_open() to verify that its own fd
is the only fd referencing the file.
Thread B trying to open the file for read will call break_lease() in
do_dentry_open() before incrementing i_readcount, which leaves a small
window where thread A can acquire the write lease and then thread B
completes the open of the file for read without breaking the write lease
that was acquired by thread A.
Fix this race by incrementing i_readcount before checking for existing
leases, same as the case with i_writecount.
Use a helper put_file_access() to decrement i_readcount or i_writecount
in do_dentry_open() and __fput().
Fixes: 387e3746d01c ("locks: eliminate false positive conflicts for write lease")
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jack Wang <jinpu.wang@ionos.com>
Date: Fri Aug 26 12:13:35 2022 +0200
mailbox: bcm-ferxrm-mailbox: Fix error check for dma_map_sg
[ Upstream commit 6b207ce8a96a71e966831e3a13c38143ba9a73c1 ]
dma_map_sg return 0 on error, fix the error check, and return -EIO
to caller.
Fixes: dbc049eee730 ("mailbox: Add driver for Broadcom FlexRM ring manager")
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Conor Dooley <conor.dooley@microchip.com>
Date: Wed Aug 24 08:08:12 2022 +0100
mailbox: mpfs: account for mbox offsets while sending
[ Upstream commit 0d1aadfe10ba17ebdeb96abb9638eb0f623f9b55 ]
The mailbox offset is not only used for receiving messages, but it is
also used by messages sent to the system controller by Linux that have a
payload, such as the "digital signature service". It is also overloaded
by certain other services (reprogramming of the FPGA fabric, see Link:)
to have a meaning other than the offset the system controller should
read from.
When the driver was written, no such services of the latter type were
in use & those of the former used an offset of zero so this has gone
un-noticed.
Link: https://www.microsemi.com/document-portal/doc_download/1245815-polarfire-fpga-and-polarfire-soc-fpga-system-services-user-guide # Section 5.2
Fixes: 83d7b1560810 ("mbox: add polarfire soc system controller mailbox")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Conor Dooley <conor.dooley@microchip.com>
Date: Wed Aug 24 08:08:11 2022 +0100
mailbox: mpfs: fix handling of the reg property
[ Upstream commit 2e10289d1f304f5082a4dda55a677b72b3bdb581 ]
The "data" region of the PolarFire SoC's system controller mailbox is
not one continuous register space - the system controller's QSPI sits
between the control and data registers. Split the "data" reg into two
parts: "data" & "control". Optionally get the "data" register address
from the 3rd reg property in the devicetree & fall back to using the
old base + MAILBOX_REG_OFFSET that the current code uses.
Fixes: 83d7b1560810 ("mbox: add polarfire soc system controller mailbox")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Logan Gunthorpe <logang@deltatee.com>
Date: Thu Aug 25 09:46:27 2022 -0600
md/raid5: Ensure stripe_fill happens on non-read IO with journal
[ Upstream commit e2eed85bc75138a9eeb63863d20f8904ac42a577 ]
When doing degrade/recover tests using the journal a kernel BUG
is hit at drivers/md/raid5.c:4381 in handle_parity_checks5():
BUG_ON(!test_bit(R5_UPTODATE, &dev->flags));
This was found to occur because handle_stripe_fill() was skipped
for stripes in the journal due to a condition in that function.
Thus blocks were not fetched and R5_UPTODATE was not set when
the code reached handle_parity_checks5().
To fix this, don't skip handle_stripe_fill() unless the stripe is
for read.
Fixes: 07e83364845e ("md/r5cache: shift complex rmw from read path to write path")
Link: https://lore.kernel.org/linux-raid/e05c4239-41a9-d2f7-3cfa-4aa9d2cea8c1@deltatee.com/
Suggested-by: Song Liu <song@kernel.org>
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: David Sloan <david.sloan@eideticom.com>
Date: Thu Sep 8 10:15:14 2022 -0600
md/raid5: Remove unnecessary bio_put() in raid5_read_one_chunk()
[ Upstream commit c66a6f41e09ad386fd2cce22b9cded837bbbc704 ]
When running chunk-sized reads on disks with badblocks duplicate bio
free/puts are observed:
=============================================================================
BUG bio-200 (Not tainted): Object already free
-----------------------------------------------------------------------------
Allocated in mempool_alloc_slab+0x17/0x20 age=3 cpu=2 pid=7504
__slab_alloc.constprop.0+0x5a/0xb0
kmem_cache_alloc+0x31e/0x330
mempool_alloc_slab+0x17/0x20
mempool_alloc+0x100/0x2b0
bio_alloc_bioset+0x181/0x460
do_mpage_readpage+0x776/0xd00
mpage_readahead+0x166/0x320
blkdev_readahead+0x15/0x20
read_pages+0x13f/0x5f0
page_cache_ra_unbounded+0x18d/0x220
force_page_cache_ra+0x181/0x1c0
page_cache_sync_ra+0x65/0xb0
filemap_get_pages+0x1df/0xaf0
filemap_read+0x1e1/0x700
blkdev_read_iter+0x1e5/0x330
vfs_read+0x42a/0x570
Freed in mempool_free_slab+0x17/0x20 age=3 cpu=2 pid=7504
kmem_cache_free+0x46d/0x490
mempool_free_slab+0x17/0x20
mempool_free+0x66/0x190
bio_free+0x78/0x90
bio_put+0x100/0x1a0
raid5_make_request+0x2259/0x2450
md_handle_request+0x402/0x600
md_submit_bio+0xd9/0x120
__submit_bio+0x11f/0x1b0
submit_bio_noacct_nocheck+0x204/0x480
submit_bio_noacct+0x32e/0xc70
submit_bio+0x98/0x1a0
mpage_readahead+0x250/0x320
blkdev_readahead+0x15/0x20
read_pages+0x13f/0x5f0
page_cache_ra_unbounded+0x18d/0x220
Slab 0xffffea000481b600 objects=21 used=0 fp=0xffff8881206d8940 flags=0x17ffffc0010201(locked|slab|head|node=0|zone=2|lastcpupid=0x1fffff)
CPU: 0 PID: 34525 Comm: kworker/u24:2 Not tainted 6.0.0-rc2-localyes-265166-gf11c5343fa3f #143
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-1ubuntu1.1 04/01/2014
Workqueue: raid5wq raid5_do_work
Call Trace:
<TASK>
dump_stack_lvl+0x5a/0x78
dump_stack+0x10/0x16
print_trailer+0x158/0x165
object_err+0x35/0x50
free_debug_processing.cold+0xb7/0xbe
__slab_free+0x1ae/0x330
kmem_cache_free+0x46d/0x490
mempool_free_slab+0x17/0x20
mempool_free+0x66/0x190
bio_free+0x78/0x90
bio_put+0x100/0x1a0
mpage_end_io+0x36/0x150
bio_endio+0x2fd/0x360
md_end_io_acct+0x7e/0x90
bio_endio+0x2fd/0x360
handle_failed_stripe+0x960/0xb80
handle_stripe+0x1348/0x3760
handle_active_stripes.constprop.0+0x72a/0xaf0
raid5_do_work+0x177/0x330
process_one_work+0x616/0xb20
worker_thread+0x2bd/0x6f0
kthread+0x179/0x1b0
ret_from_fork+0x22/0x30
</TASK>
The double free is caused by an unnecessary bio_put() in the
if(is_badblock(...)) error path in raid5_read_one_chunk().
The error path was moved ahead of bio_alloc_clone() in c82aa1b76787c
("md/raid5: move checking badblock before clone bio in
raid5_read_one_chunk"). The previous code checked and freed align_bio
which required a bio_put. After the move that is no longer needed as
raid_bio is returned to the control of the common io path which
performs its own endio resulting in a double free on bad device blocks.
Fixes: c82aa1b76787c ("md/raid5: move checking badblock before clone bio in raid5_read_one_chunk")
Signed-off-by: David Sloan <david.sloan@eideticom.com>
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Guoqing Jiang <Guoqing.jiang@linux.dev>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Logan Gunthorpe <logang@deltatee.com>
Date: Wed Sep 21 10:28:37 2022 -0600
md/raid5: Wait for MD_SB_CHANGE_PENDING in raid5d
[ Upstream commit 5e2cf333b7bd5d3e62595a44d598a254c697cd74 ]
A complicated deadlock exists when using the journal and an elevated
group_thrtead_cnt. It was found with loop devices, but its not clear
whether it can be seen with real disks. The deadlock can occur simply
by writing data with an fio script.
When the deadlock occurs, multiple threads will hang in different ways:
1) The group threads will hang in the blk-wbt code with bios waiting to
be submitted to the block layer:
io_schedule+0x70/0xb0
rq_qos_wait+0x153/0x210
wbt_wait+0x115/0x1b0
io_schedule+0x70/0xb0
rq_qos_wait+0x153/0x210
wbt_wait+0x115/0x1b0
__rq_qos_throttle+0x38/0x60
blk_mq_submit_bio+0x589/0xcd0
wbt_wait+0x115/0x1b0
__rq_qos_throttle+0x38/0x60
blk_mq_submit_bio+0x589/0xcd0
__submit_bio+0xe6/0x100
submit_bio_noacct_nocheck+0x42e/0x470
submit_bio_noacct+0x4c2/0xbb0
ops_run_io+0x46b/0x1a30
handle_stripe+0xcd3/0x36b0
handle_active_stripes.constprop.0+0x6f6/0xa60
raid5_do_work+0x177/0x330
Or:
io_schedule+0x70/0xb0
rq_qos_wait+0x153/0x210
wbt_wait+0x115/0x1b0
__rq_qos_throttle+0x38/0x60
blk_mq_submit_bio+0x589/0xcd0
__submit_bio+0xe6/0x100
submit_bio_noacct_nocheck+0x42e/0x470
submit_bio_noacct+0x4c2/0xbb0
flush_deferred_bios+0x136/0x170
raid5_do_work+0x262/0x330
2) The r5l_reclaim thread will hang in the same way, submitting a
bio to the block layer:
io_schedule+0x70/0xb0
rq_qos_wait+0x153/0x210
wbt_wait+0x115/0x1b0
__rq_qos_throttle+0x38/0x60
blk_mq_submit_bio+0x589/0xcd0
__submit_bio+0xe6/0x100
submit_bio_noacct_nocheck+0x42e/0x470
submit_bio_noacct+0x4c2/0xbb0
submit_bio+0x3f/0xf0
md_super_write+0x12f/0x1b0
md_update_sb.part.0+0x7c6/0xff0
md_update_sb+0x30/0x60
r5l_do_reclaim+0x4f9/0x5e0
r5l_reclaim_thread+0x69/0x30b
However, before hanging, the MD_SB_CHANGE_PENDING flag will be
set for sb_flags in r5l_write_super_and_discard_space(). This
flag will never be cleared because the submit_bio() call never
returns.
3) Due to the MD_SB_CHANGE_PENDING flag being set, handle_stripe()
will do no processing on any pending stripes and re-set
STRIPE_HANDLE. This will cause the raid5d thread to enter an
infinite loop, constantly trying to handle the same stripes
stuck in the queue.
The raid5d thread has a blk_plug that holds a number of bios
that are also stuck waiting seeing the thread is in a loop
that never schedules. These bios have been accounted for by
blk-wbt thus preventing the other threads above from
continuing when they try to submit bios. --Deadlock.
To fix this, add the same wait_event() that is used in raid5_do_work()
to raid5d() such that if MD_SB_CHANGE_PENDING is set, the thread will
schedule and wait until the flag is cleared. The schedule action will
flush the plug which will allow the r5l_reclaim thread to continue,
thus preventing the deadlock.
However, md_check_recovery() calls can also clear MD_SB_CHANGE_PENDING
from the same thread and can thus deadlock if the thread is put to
sleep. So avoid waiting if md_check_recovery() is being called in the
loop.
It's not clear when the deadlock was introduced, but the similar
wait_event() call in raid5_do_work() was added in 2017 by this
commit:
16d997b78b15 ("md/raid5: simplfy delaying of writes while metadata
is updated.")
Link: https://lore.kernel.org/r/7f3b87b6-b52a-f737-51d7-a4eec5c44112@deltatee.com
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Saurabh Sengar <ssengar@linux.microsoft.com>
Date: Tue Aug 23 11:51:04 2022 -0700
md: Replace snprintf with scnprintf
[ Upstream commit 1727fd5015d8f93474148f94e34cda5aa6ad4a43 ]
Current code produces a warning as shown below when total characters
in the constituent block device names plus the slashes exceeds 200.
snprintf() returns the number of characters generated from the given
input, which could cause the expression “200 – len†to wrap around
to a large positive number. Fix this by using scnprintf() instead,
which returns the actual number of characters written into the buffer.
[ 1513.267938] ------------[ cut here ]------------
[ 1513.267943] WARNING: CPU: 15 PID: 37247 at <snip>/lib/vsprintf.c:2509 vsnprintf+0x2c8/0x510
[ 1513.267944] Modules linked in: <snip>
[ 1513.267969] CPU: 15 PID: 37247 Comm: mdadm Not tainted 5.4.0-1085-azure #90~18.04.1-Ubuntu
[ 1513.267969] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.1 05/09/2022
[ 1513.267971] RIP: 0010:vsnprintf+0x2c8/0x510
<-snip->
[ 1513.267982] Call Trace:
[ 1513.267986] snprintf+0x45/0x70
[ 1513.267990] ? disk_name+0x71/0xa0
[ 1513.267993] dump_zones+0x114/0x240 [raid0]
[ 1513.267996] ? _cond_resched+0x19/0x40
[ 1513.267998] raid0_run+0x19e/0x270 [raid0]
[ 1513.268000] md_run+0x5e0/0xc50
[ 1513.268003] ? security_capable+0x3f/0x60
[ 1513.268005] do_md_run+0x19/0x110
[ 1513.268006] md_ioctl+0x195e/0x1f90
[ 1513.268007] blkdev_ioctl+0x91f/0x9f0
[ 1513.268010] block_ioctl+0x3d/0x50
[ 1513.268012] do_vfs_ioctl+0xa9/0x640
[ 1513.268014] ? __fput+0x162/0x260
[ 1513.268016] ksys_ioctl+0x75/0x80
[ 1513.268017] __x64_sys_ioctl+0x1a/0x20
[ 1513.268019] do_syscall_64+0x5e/0x200
[ 1513.268021] entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes: 766038846e875 ("md/raid0: replace printk() with pr_*()")
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Acked-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Date: Thu Aug 18 22:33:08 2022 +0200
media: cedrus: Fix endless loop in cedrus_h265_skip_bits()
commit 91db7a3fc7fe670cf1770a398a43bb4a1f776bf1 upstream.
The busy status bit may never de-assert if number of programmed skip
bits is incorrect, resulting in a kernel hang because the bit is polled
endlessly in the code. Fix it by adding timeout for the bit-polling.
This problem is reproducible by setting the data_bit_offset field of
the HEVC slice params to a wrong value by userspace.
Cc: stable@vger.kernel.org
Fixes: 7678c5462680 (media: cedrus: Fix decoding for some HEVC videos)
Reported-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Date: Thu Aug 18 22:33:07 2022 +0200
media: cedrus: Set the platform driver data earlier
commit 708938f8495147fe2e77a9a3e1015d8e6899323e upstream.
The cedrus_hw_resume() crashes with NULL deference on driver probe if
runtime PM is disabled because it uses platform data that hasn't been
set up yet. Fix this by setting the platform data earlier during probe.
Cc: stable@vger.kernel.org
Fixes: 50e761516f2b (media: platform: Add Cedrus VPU decoder driver)
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Acked-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Zheyu Ma <zheyuma97@gmail.com>
Date: Thu Jul 28 04:23:38 2022 +0200
media: cx88: Fix a null-ptr-deref bug in buffer_prepare()
[ Upstream commit 2b064d91440b33fba5b452f2d1b31f13ae911d71 ]
When the driver calls cx88_risc_buffer() to prepare the buffer, the
function call may fail, resulting in a empty buffer and null-ptr-deref
later in buffer_queue().
The following log can reveal it:
[ 41.822762] general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN PTI
[ 41.824488] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
[ 41.828027] RIP: 0010:buffer_queue+0xc2/0x500
[ 41.836311] Call Trace:
[ 41.836945] __enqueue_in_driver+0x141/0x360
[ 41.837262] vb2_start_streaming+0x62/0x4a0
[ 41.838216] vb2_core_streamon+0x1da/0x2c0
[ 41.838516] __vb2_init_fileio+0x981/0xbc0
[ 41.839141] __vb2_perform_fileio+0xbf9/0x1120
[ 41.840072] vb2_fop_read+0x20e/0x400
[ 41.840346] v4l2_read+0x215/0x290
[ 41.840603] vfs_read+0x162/0x4c0
Fix this by checking the return value of cx88_risc_buffer()
[hverkuil: fix coding style issues]
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Liang He <windhl@126.com>
Date: Wed Jul 20 16:30:03 2022 +0200
media: exynos4-is: fimc-is: Add of_node_put() when breaking out of loop
[ Upstream commit 211f8304fa21aaedc2c247f0c9d6c7f1aaa61ad7 ]
In fimc_is_register_subdevs(), we need to call of_node_put() for
the reference 'i2c_bus' when breaking out of the
for_each_compatible_node() which has increased the refcount.
Fixes: 9a761e436843 ("[media] exynos4-is: Add Exynos4x12 FIMC-IS driver")
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Xu Qiang <xuqiang36@huawei.com>
Date: Thu Aug 18 08:57:53 2022 +0200
media: meson: vdec: add missing clk_disable_unprepare on error in vdec_hevc_start()
[ Upstream commit 4029372233e13e281f8c387f279f9f064ced3810 ]
Add the missing clk_disable_unprepare() before return
from vdec_hevc_start() in the error handling case.
Fixes: 823a7300340e (“media: meson: vdec: add common HEVC decoder supportâ€)
Signed-off-by: Xu Qiang <xuqiang36@huawei.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Hangyu Hua <hbh25y@gmail.com>
Date: Tue Aug 16 10:58:19 2022 +0200
media: platform: fix some double free in meson-ge2d and mtk-jpeg and s5p-mfc
[ Upstream commit c65c3f3a2cbf21ed429d9b9c725bdb5dc6abf4cf ]
video_unregister_device will release device internally. There is no need to
call video_device_release after video_unregister_device.
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: José Expósito <jose.exposito89@gmail.com>
Date: Sat Jan 8 18:04:39 2022 +0100
media: uvcvideo: Fix memory leak in uvc_gpio_parse
[ Upstream commit f0f078457f18f10696888f8d0e6aba9deb9cde92 ]
Previously the unit buffer was allocated before checking the IRQ for
privacy GPIO. In case of error, the unit buffer was leaked.
Allocate the unit buffer after the IRQ to avoid it.
Addresses-Coverity-ID: 1474639 ("Resource leak")
Fixes: 2886477ff987 ("media: uvcvideo: Implement UVC_EXT_GPIO_UNIT")
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Yunke Cao <yunkec@google.com>
Date: Thu Jul 7 10:53:31 2022 +0200
media: uvcvideo: Use entity get_cur in uvc_ctrl_set
[ Upstream commit 5f36851c36b30f713f588ed2b60aa7b4512e2c76 ]
Entity controls should get_cur using an entity-defined function
instead of via a query. Fix this in uvc_ctrl_set.
Fixes: 65900c581d01 ("media: uvcvideo: Allow entity-defined get_info and get_cur")
Signed-off-by: Yunke Cao <yunkec@google.com>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Miaoqian Lin <linmq006@gmail.com>
Date: Wed Jun 1 06:25:14 2022 +0200
media: xilinx: vipp: Fix refcount leak in xvip_graph_dma_init
[ Upstream commit 1c78f19c3a0ea312a8178a6bfd8934eb93e9b10a ]
of_get_child_by_name() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak.
Fixes: df3305156f98 ("[media] v4l: xilinx: Add Xilinx Video IP core")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Liang He <windhl@126.com>
Date: Tue Jul 19 16:56:39 2022 +0800
memory: of: Fix refcount leak bug in of_get_ddr_timings()
[ Upstream commit 05215fb32010d4afb68fbdbb4d237df6e2d4567b ]
We should add the of_node_put() when breaking out of
for_each_child_of_node() as it will automatically increase
and decrease the refcount.
Fixes: e6b42eb6a66c ("memory: emif: add device tree support to emif driver")
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220719085640.1210583-1-windhl@126.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Liang He <windhl@126.com>
Date: Tue Jul 19 16:56:40 2022 +0800
memory: of: Fix refcount leak bug in of_lpddr3_get_ddr_timings()
[ Upstream commit 48af14fb0eaa63d9aa68f59fb0b205ec55a95636 ]
We should add the of_node_put() when breaking out of
for_each_child_of_node() as it will automatically increase
and decrease the refcount.
Fixes: 976897dd96db ("memory: Extend of_memory with LPDDR3 support")
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220719085640.1210583-2-windhl@126.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Liang He <windhl@126.com>
Date: Sat Jul 16 11:13:24 2022 +0800
memory: pl353-smc: Fix refcount leak bug in pl353_smc_probe()
[ Upstream commit 61b3c876c1cbdb1efd1f52a1f348580e6e14efb6 ]
The break of for_each_available_child_of_node() needs a
corresponding of_node_put() when the reference 'child' is not
used anymore. Here we do not need to call of_node_put() in
fail path as '!match' means no break.
While the of_platform_device_create() will created a new
reference by 'child' but it has considered the refcounting.
Fixes: fee10bd22678 ("memory: pl353: Add driver for arm pl353 static memory controller")
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220716031324.447680-1-windhl@126.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Date: Sun Jul 31 14:06:23 2022 +0200
mfd: fsl-imx25: Fix an error handling path in mx25_tsadc_setup_irq()
[ Upstream commit 3fa9e4cfb55da512ebfd57336fde468830719298 ]
If devm_of_platform_populate() fails, some resources need to be
released.
Introduce a mx25_tsadc_unset_irq() function that undoes
mx25_tsadc_setup_irq() and call it both from the new error handling path
of the probe and in the remove function.
Fixes: a55196eff6d6 ("mfd: fsl-imx25: Use devm_of_platform_populate()")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/d404e04828fc06bcfddf81f9f3e9b4babbe35415.1659269156.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dan Carpenter <error27@gmail.com>
Date: Thu Aug 11 13:53:05 2022 +0300
mfd: fsl-imx25: Fix check for platform_get_irq() errors
[ Upstream commit 75db7907355ca5e2ff606e9dd3e86b6c3a455fe2 ]
The mx25_tsadc_remove() function assumes all non-zero returns are success
but the platform_get_irq() function returns negative on error and
positive non-zero values on success. It never returns zero, but if it
did then treat that as a success.
Fixes: 18f773937968 ("mfd: fsl-imx25: Clean up irq settings during removal")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/YvTfkbVQWYKMKS/t@kili
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Date: Mon Aug 1 14:42:02 2022 +0300
mfd: intel_soc_pmic: Fix an error handling path in intel_soc_pmic_i2c_probe()
[ Upstream commit 48749cabba109397b4e7dd556e85718ec0ec114d ]
The commit in Fixes: has added a pwm_add_table() call in the probe() and
a pwm_remove_table() call in the remove(), but forget to update the error
handling path of the probe.
Add the missing pwm_remove_table() call.
Fixes: a3aa9a93df9f ("mfd: intel_soc_pmic_core: ADD PWM lookup table for CRC PMIC based PWM")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20220801114211.36267-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Date: Sun Jul 31 11:55:38 2022 +0200
mfd: lp8788: Fix an error handling path in lp8788_irq_init() and lp8788_irq_init()
[ Upstream commit 557244f6284f30613f2d61f14b579303165876c3 ]
In lp8788_irq_init(), if an error occurs after a successful
irq_domain_add_linear() call, it must be undone by a corresponding
irq_domain_remove() call.
irq_domain_remove() should also be called in lp8788_irq_exit() for the same
reason.
Fixes: eea6b7cc53aa ("mfd: Add lp8788 mfd driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/bcd5a72c9c1c383dd6324680116426e32737655a.1659261275.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Date: Sun Jul 31 11:55:27 2022 +0200
mfd: lp8788: Fix an error handling path in lp8788_probe()
[ Upstream commit becfdcd75126b20b8ec10066c5e85b34f8994ad5 ]
Should an error occurs in mfd_add_devices(), some resources need to be
released, as already done in the .remove() function.
Add an error handling path and a lp8788_irq_exit() call to undo a previous
lp8788_irq_init().
Fixes: eea6b7cc53aa ("mfd: Add lp8788 mfd driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/18398722da9df9490722d853e4797350189ae79b.1659261275.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Date: Tue Sep 13 17:11:12 2022 +0800
mfd: sm501: Add check for platform_driver_register()
[ Upstream commit 8325a6c24ad78b8c1acc3c42b098ee24105d68e5 ]
As platform_driver_register() can return error numbers,
it should be better to check platform_driver_register()
and deal with the exception.
Fixes: b6d6454fdb66 ("[PATCH] mfd: SM501 core driver")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20220913091112.1739138-1-jiasheng@iscas.ac.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Kees Cook <keescook@chromium.org>
Date: Wed Sep 7 16:05:56 2022 -0700
MIPS: BCM47XX: Cast memcmp() of function to (void *)
[ Upstream commit 0dedcf6e3301836eb70cfa649052e7ce4fcd13ba ]
Clang is especially sensitive about argument type matching when using
__overloaded functions (like memcmp(), etc). Help it see that function
pointers are just "void *". Avoids this error:
arch/mips/bcm47xx/prom.c:89:8: error: no matching function for call to 'memcmp'
if (!memcmp(prom_init, prom_init + mem, 32))
^~~~~~
include/linux/string.h:156:12: note: candidate function not viable: no known conversion from 'void (void)' to 'const void *' for 1st argument extern int memcmp(const void *,const void *,__kernel_size_t);
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: "Rafał Miłecki" <zajec5@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: linux-mips@vger.kernel.org
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: llvm@lists.linux.dev
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/lkml/202209080652.sz2d68e5-lkp@intel.com
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Lin Yujun <linyujun809@huawei.com>
Date: Wed Sep 14 11:29:17 2022 +0800
MIPS: SGI-IP27: Fix platform-device leak in bridge_platform_create()
[ Upstream commit 11bec9cba4de06b3c0e9e4041453c2caaa1cbec1 ]
In error case in bridge_platform_create after calling
platform_device_add()/platform_device_add_data()/
platform_device_add_resources(), release the failed
'pdev' or it will be leak, call platform_device_put()
to fix this problem.
Besides, 'pdev' is divided into 'pdev_wd' and 'pdev_bd',
use platform_device_unregister() to release sgi_w1
resources when xtalk-bridge registration fails.
Fixes: 5dc76a96e95a ("MIPS: PCI: use information from 1-wire PROM for IOC3 detection")
Signed-off-by: Lin Yujun <linyujun809@huawei.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Date: Sat Apr 23 15:24:03 2022 +0200
MIPS: SGI-IP27: Free some unused memory
[ Upstream commit 33d7085682b4aa212ebfadbc21da81dfefaaac16 ]
platform_device_add_data() duplicates the memory it is passed. So we can
free some memory to save a few bytes that would remain unused otherwise.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Stable-dep-of: 11bec9cba4de ("MIPS: SGI-IP27: Fix platform-device leak in bridge_platform_create()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Hangyu Hua <hbh25y@gmail.com>
Date: Wed Aug 24 16:26:00 2022 +0800
misc: ocxl: fix possible refcount leak in afu_ioctl()
[ Upstream commit c3b69ba5114c860d730870c03ab4ee45276e5e35 ]
eventfd_ctx_put need to be called to put the refcount that gotten by
eventfd_ctx_fdget when ocxl_irq_set_handler fails.
Fixes: 060146614643 ("ocxl: move event_fd handling to frontend")
Acked-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Link: https://lore.kernel.org/r/20220824082600.36159-1-hbh25y@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Duoming Zhou <duoming@zju.edu.cn>
Date: Wed Sep 28 21:39:38 2022 +0800
mISDN: fix use-after-free bugs in l1oip timer handlers
[ Upstream commit 2568a7e0832ee30b0a351016d03062ab4e0e0a3f ]
The l1oip_cleanup() traverses the l1oip_ilist and calls
release_card() to cleanup module and stack. However,
release_card() calls del_timer() to delete the timers
such as keep_tl and timeout_tl. If the timer handler is
running, the del_timer() will not stop it and result in
UAF bugs. One of the processes is shown below:
(cleanup routine) | (timer handler)
release_card() | l1oip_timeout()
... |
del_timer() | ...
... |
kfree(hc) //FREE |
| hc->timeout_on = 0 //USE
Fix by calling del_timer_sync() in release_card(), which
makes sure the timer handlers have finished before the
resources, such as l1oip and so on, have been deallocated.
What's more, the hc->workq and hc->socket_thread can kick
those timers right back in. We add a bool flag to show
if card is released. Then, check this flag in hc->workq
and hc->socket_thread.
Fixes: 3712b42d4b1b ("Add layer1 over IP support")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Baolin Wang <baolin.wang@linux.alibaba.com>
Date: Thu Aug 18 15:37:43 2022 +0800
mm/damon: validate if the pmd entry is present before accessing
commit c8b9aff419303e4d4219b5ff64b1c7e062dee48e upstream.
pmd_huge() is used to validate if the pmd entry is mapped by a huge page,
also including the case of non-present (migration or hwpoisoned) pmd entry
on arm64 or x86 architectures. This means that pmd_pfn() can not get the
correct pfn number for a non-present pmd entry, which will cause
damon_get_page() to get an incorrect page struct (also may be NULL by
pfn_to_online_page()), making the access statistics incorrect.
This means that the DAMON may make incorrect decision according to the
incorrect statistics, for example, DAMON may can not reclaim cold page
in time due to this cold page was regarded as accessed mistakenly if
DAMOS_PAGEOUT operation is specified.
Moreover it does not make sense that we still waste time to get the page
of the non-present entry. Just treat it as not-accessed and skip it,
which maintains consistency with non-present pte level entries.
So add pmd entry present validation to fix the above issues.
Link: https://lkml.kernel.org/r/58b1d1f5fbda7db49ca886d9ef6783e3dcbbbc98.1660805030.git.baolin.wang@linux.alibaba.com
Fixes: 3f49584b262c ("mm/damon: implement primitives for the virtual memory address spaces")
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Carlos Llamas <cmllamas@google.com>
Date: Fri Sep 30 00:38:43 2022 +0000
mm/mmap: undo ->mmap() when arch_validate_flags() fails
commit deb0f6562884b5b4beb883d73e66a7d3a1b96d99 upstream.
Commit c462ac288f2c ("mm: Introduce arch_validate_flags()") added a late
check in mmap_region() to let architectures validate vm_flags. The check
needs to happen after calling ->mmap() as the flags can potentially be
modified during this callback.
If arch_validate_flags() check fails we unmap and free the vma. However,
the error path fails to undo the ->mmap() call that previously succeeded
and depending on the specific ->mmap() implementation this translates to
reference increments, memory allocations and other operations what will
not be cleaned up.
There are several places (mainly device drivers) where this is an issue.
However, one specific example is bpf_map_mmap() which keeps count of the
mappings in map->writecnt. The count is incremented on ->mmap() and then
decremented on vm_ops->close(). When arch_validate_flags() fails this
count is off since bpf_map_mmap_close() is never called.
One can reproduce this issue in arm64 devices with MTE support. Here the
vm_flags are checked to only allow VM_MTE if VM_MTE_ALLOWED has been set
previously. From userspace then is enough to pass the PROT_MTE flag to
mmap() syscall to trigger the arch_validate_flags() failure.
The following program reproduces this issue:
#include <stdio.h>
#include <unistd.h>
#include <linux/unistd.h>
#include <linux/bpf.h>
#include <sys/mman.h>
int main(void)
{
union bpf_attr attr = {
.map_type = BPF_MAP_TYPE_ARRAY,
.key_size = sizeof(int),
.value_size = sizeof(long long),
.max_entries = 256,
.map_flags = BPF_F_MMAPABLE,
};
int fd;
fd = syscall(__NR_bpf, BPF_MAP_CREATE, &attr, sizeof(attr));
mmap(NULL, 4096, PROT_WRITE | PROT_MTE, MAP_SHARED, fd, 0);
return 0;
}
By manually adding some log statements to the vm_ops callbacks we can
confirm that when passing PROT_MTE to mmap() the map->writecnt is off upon
->release():
With PROT_MTE flag:
root@debian:~# ./bpf-test
[ 111.263874] bpf_map_write_active_inc: map=9 writecnt=1
[ 111.288763] bpf_map_release: map=9 writecnt=1
Without PROT_MTE flag:
root@debian:~# ./bpf-test
[ 157.816912] bpf_map_write_active_inc: map=10 writecnt=1
[ 157.830442] bpf_map_write_active_dec: map=10 writecnt=0
[ 157.832396] bpf_map_release: map=10 writecnt=0
This patch fixes the above issue by calling vm_ops->close() when the
arch_validate_flags() check fails, after this we can proceed to unmap and
free the vma on the error path.
Link: https://lkml.kernel.org/r/20220930003844.1210987-1-cmllamas@google.com
Fixes: c462ac288f2c ("mm: Introduce arch_validate_flags()")
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Liam Howlett <liam.howlett@oracle.com>
Cc: Christian Brauner (Microsoft) <brauner@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: <stable@vger.kernel.org> [5.10+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Liu Shixin <liushixin2@huawei.com>
Date: Fri Sep 23 12:21:13 2022 +0800
mm: hugetlb: fix UAF in hugetlb_handle_userfault
commit 958f32ce832ba781ac20e11bb2d12a9352ea28fc upstream.
The vma_lock and hugetlb_fault_mutex are dropped before handling userfault
and reacquire them again after handle_userfault(), but reacquire the
vma_lock could lead to UAF[1,2] due to the following race,
hugetlb_fault
hugetlb_no_page
/*unlock vma_lock */
hugetlb_handle_userfault
handle_userfault
/* unlock mm->mmap_lock*/
vm_mmap_pgoff
do_mmap
mmap_region
munmap_vma_range
/* clean old vma */
/* lock vma_lock again <--- UAF */
/* unlock vma_lock */
Since the vma_lock will unlock immediately after
hugetlb_handle_userfault(), let's drop the unneeded lock and unlock in
hugetlb_handle_userfault() to fix the issue.
[1] https://lore.kernel.org/linux-mm/000000000000d5e00a05e834962e@google.com/
[2] https://lore.kernel.org/linux-mm/20220921014457.1668-1-liuzixian4@huawei.com/
Link: https://lkml.kernel.org/r/20220923042113.137273-1-liushixin2@huawei.com
Fixes: 1a1aad8a9b7b ("userfaultfd: hugetlbfs: add userfaultfd hugetlb hook")
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reported-by: syzbot+193f9cee8638750b23cf@syzkaller.appspotmail.com
Reported-by: Liu Zixian <liuzixian4@huawei.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: <stable@vger.kernel.org> [4.14+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Date: Thu Aug 25 09:33:57 2022 +0200
mmc: au1xmmc: Fix an error handling path in au1xmmc_probe()
[ Upstream commit 5cbedf52608cc3cbc1c2a9a861fb671620427a20 ]
If clk_prepare_enable() fails, there is no point in calling
clk_disable_unprepare() in the error handling path.
Move the out_clk label at the right place.
Fixes: b6507596dfd6 ("MIPS: Alchemy: au1xmmc: use clk framework")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/21d99886d07fa7fcbec74992657dabad98c935c4.1661412818.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Richard Acayan <mailingradian@gmail.com>
Date: Thu Sep 22 21:43:22 2022 -0400
mmc: sdhci-msm: add compatible string check for sdm670
[ Upstream commit 4de95950d970c71a9e82a24573bb7a44fd95baa1 ]
The Snapdragon 670 has the same quirk as Snapdragon 845 (needing to
restore the dll config). Add a compatible string check to detect the need
for this.
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Reviewed-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220923014322.33620-3-mailingradian@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Wenchao Chen <wenchao.chen@unisoc.com>
Date: Tue Oct 11 18:49:35 2022 +0800
mmc: sdhci-sprd: Fix minimum clock limit
commit 6e141772e6465f937458b35ddcfd0a981b6f5280 upstream.
The Spreadtrum controller supports 100KHz minimal clock rate, which means
that the current value 400KHz is wrong.
Unfortunately this has also lead to fail to initialize some cards, which
are allowed to require 100KHz to work. So, let's fix the problem by
changing the minimal supported clock rate to 100KHz.
Signed-off-by: Wenchao Chen <wenchao.chen@unisoc.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Fixes: fb8bd90f83c4 ("mmc: sdhci-sprd: Add Spreadtrum's initial host controller")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221011104935.10980-1-wenchao.chen666@gmail.com
[Ulf: Clarified to commit-message]
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Date: Thu Sep 22 21:06:40 2022 +0200
mmc: wmt-sdmmc: Fix an error handling path in wmt_mci_probe()
[ Upstream commit cb58188ad90a61784a56a64f5107faaf2ad323e7 ]
A dma_free_coherent() call is missing in the error handling path of the
probe, as already done in the remove function.
Fixes: 3a96dff0f828 ("mmc: SD/MMC Host Controller for Wondermedia WM8505/WM8650")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/53fc6ffa5d1c428fefeae7d313cf4a669c3a1e98.1663873255.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: William Dean <williamsukatube@gmail.com>
Date: Fri Jul 22 17:16:44 2022 +0800
mtd: devices: docg3: check the return value of devm_ioremap() in the probe
[ Upstream commit 26e784433e6c65735cd6d93a8db52531970d9a60 ]
The function devm_ioremap() in docg3_probe() can fail, so
its return value should be checked.
Fixes: 82402aeb8c81e ("mtd: docg3: Use devm_*() functions")
Reported-by: Hacash Robot <hacashRobot@santino.com>
Signed-off-by: William Dean <williamsukatube@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220722091644.2937953-1-williamsukatube@163.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Tudor Ambarus <tudor.ambarus@microchip.com>
Date: Thu Jul 28 10:40:14 2022 +0300
mtd: rawnand: atmel: Unmap streaming DMA mappings
commit 1161703c9bd664da5e3b2eb1a3bb40c210e026ea upstream.
Every dma_map_single() call should have its dma_unmap_single() counterpart,
because the DMA address space is a shared resource and one could render the
machine unusable by consuming all DMA addresses.
Link: https://lore.kernel.org/lkml/13c6c9a2-6db5-c3bf-349b-4c127ad3496a@axentia.se/
Cc: stable@vger.kernel.org
Fixes: f88fc122cc34 ("mtd: nand: Cleanup/rework the atmel_nand driver")
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Acked-by: Alexander Dahl <ada@thorsis.com>
Reported-by: Peter Rosin <peda@axentia.se>
Tested-by: Alexander Dahl <ada@thorsis.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Tested-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220728074014.145406-1-tudor.ambarus@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Pali Rohár <pali@kernel.org>
Date: Thu Jul 7 20:43:28 2022 +0200
mtd: rawnand: fsl_elbc: Fix none ECC mode
[ Upstream commit 049e43b9fd8fd2966940485da163d67e96ee3fea ]
Commit f6424c22aa36 ("mtd: rawnand: fsl_elbc: Make SW ECC work") added
support for specifying ECC mode via DTS and skipping autodetection.
But it broke explicit specification of HW ECC mode in DTS as correct
settings for HW ECC mode are applied only when NONE mode or nothing was
specified in DTS file.
Also it started aliasing NONE mode to be same as when ECC mode was not
specified and disallowed usage of ON_DIE mode.
Fix all these issues. Use autodetection of ECC mode only in case when mode
was really not specified in DTS file by checking that ecc value is invalid.
Set HW ECC settings either when HW ECC was specified in DTS or it was
autodetected. And do not fail when ON_DIE mode is set.
Fixes: f6424c22aa36 ("mtd: rawnand: fsl_elbc: Make SW ECC work")
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220707184328.3845-1-pali@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Date: Sun Jul 3 01:12:22 2022 +0200
mtd: rawnand: intel: Read the chip-select line from the correct OF node
[ Upstream commit bfc618fcc3f167ad082053e81e9d664e724c6288 ]
The chip select has to be read from the flash node which is a child node
of the NAND controller.
Fixes: 0b1039f016e8a3 ("mtd: rawnand: Add NAND controller support on Intel LGM SoC")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220702231227.1579176-4-martin.blumenstingl@googlemail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Date: Sun Jul 3 01:12:23 2022 +0200
mtd: rawnand: intel: Remove undocumented compatible string
[ Upstream commit 68c02ebaa34d41063ccbbc789a352537ddc3cd8a ]
The "intel,nand-controller" compatible string is not part of the
dt-bindings. Remove it from the driver as it's not supposed to be used
without any documentation for it.
Fixes: 0b1039f016e8a3 ("mtd: rawnand: Add NAND controller support on Intel LGM SoC")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220702231227.1579176-5-martin.blumenstingl@googlemail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dan Carpenter <error27@gmail.com>
Date: Thu Jul 28 10:12:12 2022 +0300
mtd: rawnand: meson: fix bit map use in meson_nfc_ecc_correct()
[ Upstream commit 3e4ad3212cf22687410b1e8f4e68feec50646113 ]
The meson_nfc_ecc_correct() function accidentally does a right shift
instead of a left shift so it only works for BIT(0). Also use
BIT_ULL() because "correct_bitmap" is a u64 and we want to avoid
shift wrapping bugs.
Fixes: 8fae856c5350 ("mtd: rawnand: meson: add support for Amlogic NAND flash controller")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Liang Yang <liang.yang@amlogic.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/YuI2zF1hP65+LE7r@kili
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Shigeru Yoshida <syoshida@redhat.com>
Date: Thu Sep 8 01:35:02 2022 +0900
nbd: Fix hung when signal interrupts nbd_start_device_ioctl()
[ Upstream commit 1de7c3cf48fc41cd95adb12bd1ea9033a917798a ]
syzbot reported hung task [1]. The following program is a simplified
version of the reproducer:
int main(void)
{
int sv[2], fd;
if (socketpair(AF_UNIX, SOCK_STREAM, 0, sv) < 0)
return 1;
if ((fd = open("/dev/nbd0", 0)) < 0)
return 1;
if (ioctl(fd, NBD_SET_SIZE_BLOCKS, 0x81) < 0)
return 1;
if (ioctl(fd, NBD_SET_SOCK, sv[0]) < 0)
return 1;
if (ioctl(fd, NBD_DO_IT) < 0)
return 1;
return 0;
}
When signal interrupt nbd_start_device_ioctl() waiting the condition
atomic_read(&config->recv_threads) == 0, the task can hung because it
waits the completion of the inflight IOs.
This patch fixes the issue by clearing queue, not just shutdown, when
signal interrupt nbd_start_device_ioctl().
Link: https://syzkaller.appspot.com/bug?id=7d89a3ffacd2b83fdd39549bc4d8e0a89ef21239 [1]
Reported-by: syzbot+38e6c55d4969a14c1534@syzkaller.appspotmail.com
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/20220907163502.577561-1-syoshida@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Date: Tue Oct 4 21:47:50 2022 -0400
net/ieee802154: don't warn zero-sized raw_sendmsg()
[ Upstream commit b12e924a2f5b960373459c8f8a514f887adf5cac ]
syzbot is hitting skb_assert_len() warning at __dev_queue_xmit() [1],
for PF_IEEE802154 socket's zero-sized raw_sendmsg() request is hitting
__dev_queue_xmit() with skb->len == 0.
Since PF_IEEE802154 socket's zero-sized raw_sendmsg() request was
able to return 0, don't call __dev_queue_xmit() if packet length is 0.
----------
#include <sys/socket.h>
#include <netinet/in.h>
int main(int argc, char *argv[])
{
struct sockaddr_in addr = { .sin_family = AF_INET, .sin_addr.s_addr = htonl(INADDR_LOOPBACK) };
struct iovec iov = { };
struct msghdr hdr = { .msg_name = &addr, .msg_namelen = sizeof(addr), .msg_iov = &iov, .msg_iovlen = 1 };
sendmsg(socket(PF_IEEE802154, SOCK_RAW, 0), &hdr, 0);
return 0;
}
----------
Note that this might be a sign that commit fd1894224407c484 ("bpf: Don't
redirect packets with invalid pkt_len") should be reverted, for
skb->len == 0 was acceptable for at least PF_IEEE802154 socket.
Link: https://syzkaller.appspot.com/bug?extid=5ea725c25d06fb9114c4 [1]
Reported-by: syzbot <syzbot+5ea725c25d06fb9114c4@syzkaller.appspotmail.com>
Fixes: fd1894224407c484 ("bpf: Don't redirect packets with invalid pkt_len")
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20221005014750.3685555-2-aahringo@redhat.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Date: Sun Oct 2 01:43:44 2022 +0900
net/ieee802154: reject zero-sized raw_sendmsg()
[ Upstream commit 3a4d061c699bd3eedc80dc97a4b2a2e1af83c6f5 ]
syzbot is hitting skb_assert_len() warning at raw_sendmsg() for ieee802154
socket. What commit dc633700f00f726e ("net/af_packet: check len when
min_header_len equals to 0") does also applies to ieee802154 socket.
Link: https://syzkaller.appspot.com/bug?extid=5ea725c25d06fb9114c4
Reported-by: syzbot <syzbot+5ea725c25d06fb9114c4@syzkaller.appspotmail.com>
Fixes: fd1894224407c484 ("bpf: Don't redirect packets with invalid pkt_len")
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ravi Gunasekaran <r-gunasekaran@ti.com>
Date: Wed Aug 17 15:14:06 2022 +0530
net: ethernet: ti: davinci_mdio: Add workaround for errata i2329
[ Upstream commit d04807b80691c6041ca8e3dcf1870d1bf1082c22 ]
On the CPSW and ICSS peripherals, there is a possibility that the MDIO
interface returns corrupt data on MDIO reads or writes incorrect data
on MDIO writes. There is also a possibility for the MDIO interface to
become unavailable until the next peripheral reset.
The workaround is to configure the MDIO in manual mode and disable the
MDIO state machine and emulate the MDIO protocol by reading and writing
appropriate fields in MDIO_MANUAL_IF_REG register of the MDIO controller
to manipulate the MDIO clock and data pins.
More details about the errata i2329 and the workaround is available in:
https://www.ti.com/lit/er/sprz487a/sprz487a.pdf
Add implementation to disable MDIO state machine, configure MDIO in manual
mode and achieve MDIO read and writes via MDIO Bitbanging
Signed-off-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Randy Dunlap <rdunlap@infradead.org>
Date: Tue Aug 23 19:42:16 2022 -0700
net: ethernet: ti: davinci_mdio: fix build for mdio bitbang uses
commit 35bbe652c421037822aba29423f5f1f7d0d69f3f upstream.
davinci_mdio.c uses mdio bitbang APIs, so it should select
MDIO_BITBANG to prevent build errors.
arm-linux-gnueabi-ld: drivers/net/ethernet/ti/davinci_mdio.o: in function `davinci_mdio_remove':
drivers/net/ethernet/ti/davinci_mdio.c:649: undefined reference to `free_mdio_bitbang'
arm-linux-gnueabi-ld: drivers/net/ethernet/ti/davinci_mdio.o: in function `davinci_mdio_probe':
drivers/net/ethernet/ti/davinci_mdio.c:545: undefined reference to `alloc_mdio_bitbang'
arm-linux-gnueabi-ld: drivers/net/ethernet/ti/davinci_mdio.o: in function `davinci_mdiobb_read':
drivers/net/ethernet/ti/davinci_mdio.c:236: undefined reference to `mdiobb_read'
arm-linux-gnueabi-ld: drivers/net/ethernet/ti/davinci_mdio.o: in function `davinci_mdiobb_write':
drivers/net/ethernet/ti/davinci_mdio.c:253: undefined reference to `mdiobb_write'
Fixes: d04807b80691 ("net: ethernet: ti: davinci_mdio: Add workaround for errata i2329")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Ravi Gunasekaran <r-gunasekaran@ti.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Naresh Kamboju <naresh.kamboju@linaro.org>
Cc: Sudip Mukherjee (Codethink) <sudipm.mukherjee@gmail.com>
Link: https://lore.kernel.org/r/20220824024216.4939-1-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Zheng Yongjun <zhengyongjun3@huawei.com>
Date: Thu Sep 8 13:55:13 2022 +0000
net: fs_enet: Fix wrong check in do_pd_setup
[ Upstream commit ec3f06b542a960806a81345042e4eee3f8c5dec4 ]
Should check of_iomap return value 'fep->fec.fecp' instead of 'fep->fcc.fccp'
Fixes: 976de6a8c304 ("fs_enet: Be an of_platform device when CONFIG_PPC_CPM_NEW_BINDING is set.")
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Alexander Aring <aahringo@redhat.com>
Date: Wed Oct 5 22:02:37 2022 -0400
net: ieee802154: return -EINVAL for unknown addr type
commit 30393181fdbc1608cc683b4ee99dcce05ffcc8c7 upstream.
This patch adds handling to return -EINVAL for an unknown addr type. The
current behaviour is to return 0 as successful but the size of an
unknown addr type is not defined and should return an error like -EINVAL.
Fixes: 94160108a70c ("net/ieee802154: fix uninit value bug in dgram_sendmsg")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Liu Jian <liujian56@huawei.com>
Date: Tue Aug 23 21:37:54 2022 +0800
net: If sock is dead don't access sock's sk_wq in sk_stream_wait_memory
[ Upstream commit 3f8ef65af927db247418d4e1db49164d7a158fc5 ]
Fixes the below NULL pointer dereference:
[...]
[ 14.471200] Call Trace:
[ 14.471562] <TASK>
[ 14.471882] lock_acquire+0x245/0x2e0
[ 14.472416] ? remove_wait_queue+0x12/0x50
[ 14.473014] ? _raw_spin_lock_irqsave+0x17/0x50
[ 14.473681] _raw_spin_lock_irqsave+0x3d/0x50
[ 14.474318] ? remove_wait_queue+0x12/0x50
[ 14.474907] remove_wait_queue+0x12/0x50
[ 14.475480] sk_stream_wait_memory+0x20d/0x340
[ 14.476127] ? do_wait_intr_irq+0x80/0x80
[ 14.476704] do_tcp_sendpages+0x287/0x600
[ 14.477283] tcp_bpf_push+0xab/0x260
[ 14.477817] tcp_bpf_sendmsg_redir+0x297/0x500
[ 14.478461] ? __local_bh_enable_ip+0x77/0xe0
[ 14.479096] tcp_bpf_send_verdict+0x105/0x470
[ 14.479729] tcp_bpf_sendmsg+0x318/0x4f0
[ 14.480311] sock_sendmsg+0x2d/0x40
[ 14.480822] ____sys_sendmsg+0x1b4/0x1c0
[ 14.481390] ? copy_msghdr_from_user+0x62/0x80
[ 14.482048] ___sys_sendmsg+0x78/0xb0
[ 14.482580] ? vmf_insert_pfn_prot+0x91/0x150
[ 14.483215] ? __do_fault+0x2a/0x1a0
[ 14.483738] ? do_fault+0x15e/0x5d0
[ 14.484246] ? __handle_mm_fault+0x56b/0x1040
[ 14.484874] ? lock_is_held_type+0xdf/0x130
[ 14.485474] ? find_held_lock+0x2d/0x90
[ 14.486046] ? __sys_sendmsg+0x41/0x70
[ 14.486587] __sys_sendmsg+0x41/0x70
[ 14.487105] ? intel_pmu_drain_pebs_core+0x350/0x350
[ 14.487822] do_syscall_64+0x34/0x80
[ 14.488345] entry_SYSCALL_64_after_hwframe+0x63/0xcd
[...]
The test scenario has the following flow:
thread1 thread2
----------- ---------------
tcp_bpf_sendmsg
tcp_bpf_send_verdict
tcp_bpf_sendmsg_redir sock_close
tcp_bpf_push_locked __sock_release
tcp_bpf_push //inet_release
do_tcp_sendpages sock->ops->release
sk_stream_wait_memory // tcp_close
sk_wait_event sk->sk_prot->close
release_sock(__sk);
***
lock_sock(sk);
__tcp_close
sock_orphan(sk)
sk->sk_wq = NULL
release_sock
****
lock_sock(__sk);
remove_wait_queue(sk_sleep(sk), &wait);
sk_sleep(sk)
//NULL pointer dereference
&rcu_dereference_raw(sk->sk_wq)->wait
While waiting for memory in thread1, the socket is released with its wait
queue because thread2 has closed it. This caused by tcp_bpf_send_verdict
didn't increase the f_count of psock->sk_redir->sk_socket->file in thread1.
We should check if SOCK_DEAD flag is set on wakeup in sk_stream_wait_memory
before accessing the wait queue.
Suggested-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Liu Jian <liujian56@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Cc: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/bpf/20220823133755.314697-2-liujian56@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Date: Mon Oct 3 17:19:27 2022 +0100
net: mvpp2: fix mvpp2 debugfs leak
[ Upstream commit 0152dfee235e87660f52a117fc9f70dc55956bb4 ]
When mvpp2 is unloaded, the driver specific debugfs directory is not
removed, which technically leads to a memory leak. However, this
directory is only created when the first device is probed, so the
hardware is present. Removing the module is only something a developer
would to when e.g. testing out changes, so the module would be
reloaded. So this memory leak is minor.
The original attempt in commit fe2c9c61f668 ("net: mvpp2: debugfs: fix
memory leak when using debugfs_lookup()") that was labelled as a memory
leak fix was not, it fixed a refcount leak, but in doing so created a
problem when the module is reloaded - the directory already exists, but
mvpp2_root is NULL, so we lose all debugfs entries. This fix has been
reverted.
This is the alternative fix, where we remove the offending directory
whenever the driver is unloaded.
Fixes: 21da57a23125 ("net: mvpp2: add a debugfs interface for the Header Parser")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Marcin Wojtas <mw@semihalf.com>
Link: https://lore.kernel.org/r/E1ofOAB-00CzkG-UO@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Date: Thu Sep 29 00:25:37 2022 +0900
net: rds: don't hold sock lock when cancelling work from rds_tcp_reset_callbacks()
[ Upstream commit a91b750fd6629354460282bbf5146c01b05c4859 ]
syzbot is reporting lockdep warning at rds_tcp_reset_callbacks() [1], for
commit ac3615e7f3cffe2a ("RDS: TCP: Reduce code duplication in
rds_tcp_reset_callbacks()") added cancel_delayed_work_sync() into a section
protected by lock_sock() without realizing that rds_send_xmit() might call
lock_sock().
We don't need to protect cancel_delayed_work_sync() using lock_sock(), for
even if rds_{send,recv}_worker() re-queued this work while __flush_work()
from cancel_delayed_work_sync() was waiting for this work to complete,
retried rds_{send,recv}_worker() is no-op due to the absence of RDS_CONN_UP
bit.
Link: https://syzkaller.appspot.com/bug?extid=78c55c7bc6f66e53dce2 [1]
Reported-by: syzbot <syzbot+78c55c7bc6f66e53dce2@syzkaller.appspotmail.com>
Co-developed-by: Hillf Danton <hdanton@sina.com>
Signed-off-by: Hillf Danton <hdanton@sina.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Tested-by: syzbot <syzbot+78c55c7bc6f66e53dce2@syzkaller.appspotmail.com>
Fixes: ac3615e7f3cffe2a ("RDS: TCP: Reduce code duplication in rds_tcp_reset_callbacks()")
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Mika Westerberg <mika.westerberg@linux.intel.com>
Date: Tue Aug 30 18:32:46 2022 +0300
net: thunderbolt: Enable DMA paths only after rings are enabled
commit ff7cd07f306406493f7b78890475e85b6d0811ed upstream.
If the other host starts sending packets early on it is possible that we
are still in the middle of populating the initial Rx ring packets to the
ring. This causes the tbnet_poll() to mess over the queue and causes
list corruption. This happens specifically when connected with macOS as
it seems start sending various IP discovery packets as soon as its side
of the paths are configured.
To prevent this we move the DMA path enabling to happen after we have
primed the Rx ring. This makes sure no incoming packets can arrive
before we are ready to handle them.
Fixes: e69b6c02b4c3 ("net: Add support for networking over Thunderbolt cable")
Cc: stable@vger.kernel.org
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Maxim Mikityanskiy <maxtram95@gmail.com>
Date: Sat Oct 1 13:57:13 2022 +0300
net: wwan: iosm: Call mutex_init before locking it
[ Upstream commit ba0fbdb95da5ddd8db457ce6ba09d16dd979a294 ]
wwan_register_ops calls wwan_create_default_link, which ends up in the
ipc_wwan_newlink callback that locks ipc_wwan->if_mutex. However, this
mutex is not yet initialized by that point. Fix it by moving mutex_init
above the wwan_register_ops call. This also makes the order of
operations in ipc_wwan_init symmetric to ipc_wwan_deinit.
Fixes: 83068395bbfc ("net: iosm: create default link via WWAN core")
Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Reviewed-by: M Chetan Kumar <m.chetan.kumar@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Antoine Tenart <atenart@kernel.org>
Date: Fri Sep 16 11:29:40 2022 +0200
netfilter: conntrack: fix the gc rescheduling delay
[ Upstream commit 95eabdd207024312876d0ebed90b4c977e050e85 ]
Commit 2cfadb761d3d ("netfilter: conntrack: revisit gc autotuning")
changed the eviction rescheduling to the use average expiry of scanned
entries (within 1-60s) by doing:
for (...) {
expires = clamp(nf_ct_expires(tmp), ...);
next_run += expires;
next_run /= 2;
}
The issue is the above will make the average ('next_run' here) more
dependent on the last expiration values than the firsts (for sets > 2).
Depending on the expiration values used to compute the average, the
result can be quite different than what's expected. To fix this we can
do the following:
for (...) {
expires = clamp(nf_ct_expires(tmp), ...);
next_run += (expires - next_run) / ++count;
}
Fixes: 2cfadb761d3d ("netfilter: conntrack: revisit gc autotuning")
Cc: Florian Westphal <fw@strlen.de>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Antoine Tenart <atenart@kernel.org>
Date: Fri Sep 16 11:29:41 2022 +0200
netfilter: conntrack: revisit the gc initial rescheduling bias
[ Upstream commit 2aa192757005f130b2dd3547dda6e462e761199f ]
The previous commit changed the way the rescheduling delay is computed
which has a side effect: the bias is now represented as much as the
other entries in the rescheduling delay which makes the logic to kick in
only with very large sets, as the initial interval is very large
(INT_MAX).
Revisit the GC initial bias to allow more frequent GC for smaller sets
while still avoiding wakeups when a machine is mostly idle. We're moving
from a large initial value to pretending we have 100 entries expiring at
the upper bound. This way only a few entries having a small timeout
won't impact much the rescheduling delay and non-idle machines will have
enough entries to lower the delay when needed. This also improves
readability as the initial bias is now linked to what is computed
instead of being an arbitrary large value.
Fixes: 2cfadb761d3d ("netfilter: conntrack: revisit gc autotuning")
Suggested-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Phil Sutter <phil@nwl.cc>
Date: Wed Sep 21 13:07:31 2022 +0200
netfilter: nft_fib: Fix for rpath check with VRF devices
[ Upstream commit 2a8a7c0eaa8747c16aa4a48d573aa920d5c00a5c ]
Analogous to commit b575b24b8eee3 ("netfilter: Fix rpfilter
dropping vrf packets by mistake") but for nftables fib expression:
Add special treatment of VRF devices so that typical reverse path
filtering via 'fib saddr . iif oif' expression works as expected.
Fixes: f6d0cbcf09c50 ("netfilter: nf_tables: add fib expression")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Date: Thu Sep 1 07:27:04 2022 +0200
nfsd: Fix a memory leak in an error handling path
[ Upstream commit fd1ef88049de09bc70d60b549992524cfc0e66ff ]
If this memdup_user() call fails, the memory allocated in a previous call
a few lines above should be freed. Otherwise it leaks.
Fixes: 6ee95d1c8991 ("nfsd: add support for upcall version 2")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Chuck Lever <chuck.lever@oracle.com>
Date: Mon Sep 5 15:33:32 2022 -0400
NFSD: Fix handling of oversized NFSv4 COMPOUND requests
[ Upstream commit 7518a3dc5ea249d4112156ce71b8b184eb786151 ]
If an NFS server returns NFS4ERR_RESOURCE on the first operation in
an NFSv4 COMPOUND, there's no way for a client to know where the
problem is and then simplify the compound to make forward progress.
So instead, make NFSD process as many operations in an oversized
COMPOUND as it can and then return NFS4ERR_RESOURCE on the first
operation it did not process.
pynfs NFSv4.0 COMP6 exercises this case, but checks only for the
COMPOUND status code, not whether the server has processed any
of the operations.
pynfs NFSv4.1 SEQ6 and SEQ7 exercise the NFSv4.1 case, which detects
too many operations per COMPOUND by checking against the limits
negotiated when the session was created.
Suggested-by: Bruce Fields <bfields@fieldses.org>
Fixes: 0078117c6d91 ("nfsd: return RESOURCE not GARBAGE_ARGS on too many ops")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dai Ngo <dai.ngo@oracle.com>
Date: Mon Sep 26 10:59:16 2022 -0700
NFSD: fix use-after-free on source server when doing inter-server copy
[ Upstream commit 019805fea91599b22dfa62ffb29c022f35abeb06 ]
Use-after-free occurred when the laundromat tried to free expired
cpntf_state entry on the s2s_cp_stateids list after inter-server
copy completed. The sc_cp_list that the expired copy state was
inserted on was already freed.
When COPY completes, the Linux client normally sends LOCKU(lock_state x),
FREE_STATEID(lock_state x) and CLOSE(open_state y) to the source server.
The nfs4_put_stid call from nfsd4_free_stateid cleans up the copy state
from the s2s_cp_stateids list before freeing the lock state's stid.
However, sometimes the CLOSE was sent before the FREE_STATEID request.
When this happens, the nfsd4_close_open_stateid call from nfsd4_close
frees all lock states on its st_locks list without cleaning up the copy
state on the sc_cp_list list. When the time the FREE_STATEID arrives the
server returns BAD_STATEID since the lock state was freed. This causes
the use-after-free error to occur when the laundromat tries to free
the expired cpntf_state.
This patch adds a call to nfs4_free_cpntf_statelist in
nfsd4_close_open_stateid to clean up the copy state before calling
free_ol_stateid_reaplist to free the lock state's stid on the reaplist.
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Chuck Lever <chuck.lever@oracle.com>
Date: Thu Sep 1 15:10:18 2022 -0400
NFSD: Protect against send buffer overflow in NFSv2 READ
commit 401bc1f90874280a80b93f23be33a0e7e2d1f912 upstream.
Since before the git era, NFSD has conserved the number of pages
held by each nfsd thread by combining the RPC receive and send
buffers into a single array of pages. This works because there are
no cases where an operation needs a large RPC Call message and a
large RPC Reply at the same time.
Once an RPC Call has been received, svc_process() updates
svc_rqst::rq_res to describe the part of rq_pages that can be
used for constructing the Reply. This means that the send buffer
(rq_res) shrinks when the received RPC record containing the RPC
Call is large.
A client can force this shrinkage on TCP by sending a correctly-
formed RPC Call header contained in an RPC record that is
excessively large. The full maximum payload size cannot be
constructed in that case.
Cc: <stable@vger.kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Chuck Lever <chuck.lever@oracle.com>
Date: Thu Sep 1 15:10:05 2022 -0400
NFSD: Protect against send buffer overflow in NFSv2 READDIR
[ Upstream commit 00b4492686e0497fdb924a9d4c8f6f99377e176c ]
Restore the previous limit on the @count argument to prevent a
buffer overflow attack.
Fixes: 53b1119a6e50 ("NFSD: Fix READDIR buffer overflow")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Chuck Lever <chuck.lever@oracle.com>
Date: Thu Sep 1 15:10:24 2022 -0400
NFSD: Protect against send buffer overflow in NFSv3 READ
commit fa6be9cc6e80ec79892ddf08a8c10cabab9baf38 upstream.
Since before the git era, NFSD has conserved the number of pages
held by each nfsd thread by combining the RPC receive and send
buffers into a single array of pages. This works because there are
no cases where an operation needs a large RPC Call message and a
large RPC Reply at the same time.
Once an RPC Call has been received, svc_process() updates
svc_rqst::rq_res to describe the part of rq_pages that can be
used for constructing the Reply. This means that the send buffer
(rq_res) shrinks when the received RPC record containing the RPC
Call is large.
A client can force this shrinkage on TCP by sending a correctly-
formed RPC Call header contained in an RPC record that is
excessively large. The full maximum payload size cannot be
constructed in that case.
Cc: <stable@vger.kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Chuck Lever <chuck.lever@oracle.com>
Date: Thu Sep 1 15:10:12 2022 -0400
NFSD: Protect against send buffer overflow in NFSv3 READDIR
commit 640f87c190e0d1b2a0fcb2ecf6d2cd53b1c41991 upstream.
Since before the git era, NFSD has conserved the number of pages
held by each nfsd thread by combining the RPC receive and send
buffers into a single array of pages. This works because there are
no cases where an operation needs a large RPC Call message and a
large RPC Reply message at the same time.
Once an RPC Call has been received, svc_process() updates
svc_rqst::rq_res to describe the part of rq_pages that can be
used for constructing the Reply. This means that the send buffer
(rq_res) shrinks when the received RPC record containing the RPC
Call is large.
A client can force this shrinkage on TCP by sending a correctly-
formed RPC Call header contained in an RPC record that is
excessively large. The full maximum payload size cannot be
constructed in that case.
Thanks to Aleksi Illikainen and Kari Hulkko for uncovering this
issue.
Reported-by: Ben Ronallo <Benjamin.Ronallo@synopsys.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Anna Schumaker <Anna.Schumaker@Netapp.com>
Date: Tue Sep 13 14:01:50 2022 -0400
NFSD: Return nfserr_serverfault if splice_ok but buf->pages have data
[ Upstream commit 06981d560606ac48d61e5f4fff6738b925c93173 ]
This was discussed with Chuck as part of this patch set. Returning
nfserr_resource was decided to not be the best error message here, and
he suggested changing to nfserr_serverfault instead.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Link: https://lore.kernel.org/linux-nfs/20220907195259.926736-1-anna@kernel.org/T/#t
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Christian Brauner <brauner@kernel.org>
Date: Mon Aug 29 14:38:40 2022 +0200
ntfs3: rework xattr handlers and switch to POSIX ACL VFS helpers
[ Upstream commit a26aa12384158116c0d80d50e0bdc7b3323551e2 ]
The xattr code in ntfs3 is currently a bit confused. For example, it
defines a POSIX ACL i_op->set_acl() method but instead of relying on the
generic POSIX ACL VFS helpers it defines its own set of xattr helpers
with the consequence that i_op->set_acl() is currently dead code.
Switch ntfs3 to rely on the VFS POSIX ACL xattr handlers. Also remove
i_op->{g,s}et_acl() methods from symlink inode operations. Symlinks
don't support xattrs.
This is a preliminary change for the following patches which move
handling idmapped mounts directly in posix_acl_xattr_set().
This survives POSIX ACL xfstests.
Fixes: be71b5cba2e6 ("fs/ntfs3: Add attrib operations")
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Reviewed-by: Seth Forshee (DigitalOcean) <sforshee@kernel.org>>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Sagi Grimberg <sagi@grimberg.me>
Date: Thu Sep 29 10:36:47 2022 +0300
nvme-multipath: fix possible hang in live ns resize with ANA access
commit 72e3b8883a36e80ebfa41015c7b6926ce31ace05 upstream.
When we revalidate paths as part of ns size change (as of commit
e7d65803e2bb), it is possible that during the path revalidation, the
only paths that is IO capable (i.e. optimized/non-optimized) are the
ones that ns resize was not yet informed to the host, which will cause
inflight requests to be requeued (as we have available paths but none
are IO capable). These requests on the requeue list are waiting for
someone to resubmit them at some point.
The IO capable paths will eventually notify the ns resize change to the
host, but there is nothing that will kick the requeue list to resubmit
the queued requests.
Fix this by always kicking the requeue list, and if no IO capable path
exists, these requests will be queued again.
A typical log that indicates that IOs are requeued:
--
nvme nvme1: creating 4 I/O queues.
nvme nvme1: new ctrl: "testnqn1"
nvme nvme2: creating 4 I/O queues.
nvme nvme2: mapped 4/0/0 default/read/poll queues.
nvme nvme2: new ctrl: NQN "testnqn1", addr 127.0.0.1:8009
nvme nvme1: rescanning namespaces.
nvme1n1: detected capacity change from 2097152 to 4194304
block nvme1n1: no usable path - requeuing I/O
block nvme1n1: no usable path - requeuing I/O
block nvme1n1: no usable path - requeuing I/O
block nvme1n1: no usable path - requeuing I/O
block nvme1n1: no usable path - requeuing I/O
block nvme1n1: no usable path - requeuing I/O
block nvme1n1: no usable path - requeuing I/O
block nvme1n1: no usable path - requeuing I/O
block nvme1n1: no usable path - requeuing I/O
block nvme1n1: no usable path - requeuing I/O
nvme nvme2: rescanning namespaces.
--
Reported-by: Yogev Cohen <yogev@lightbitslabs.com>
Fixes: e7d65803e2bb ("nvme-multipath: revalidate paths during rescan")
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Cc: <stable@vger.kernel.org> # v5.15+
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Rishabh Bhatnagar <risbhat@amazon.com>
Date: Tue Sep 20 19:19:32 2022 +0000
nvme-pci: set min_align_mask before calculating max_hw_sectors
commit 61ce339f19fabbc3e51237148a7ef6f2270e44fa upstream.
If swiotlb is force enabled dma_max_mapping_size ends up calling
swiotlb_max_mapping_size which takes into account the min align mask for
the device. Set the min align mask for nvme driver before calling
dma_max_mapping_size while calculating max hw sectors.
Signed-off-by: Rishabh Bhatnagar <risbhat@amazon.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Keith Busch <kbusch@kernel.org>
Date: Mon Sep 19 12:45:08 2022 -0700
nvme: copy firmware_rev on each init
[ Upstream commit a8eb6c1ba48bddea82e8d74cbe6e119f006be97d ]
The firmware revision can change on after a reset so copy the most
recent info each time instead of just the first time, otherwise the
sysfs firmware_rev entry may contain stale data.
Reported-by: Jeff Lien <jeff.lien@wdc.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Chao Leng <lengchao@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Gaosheng Cui <cuigaosheng1@huawei.com>
Date: Fri Sep 16 13:04:02 2022 +0100
nvmem: core: Fix memleak in nvmem_register()
commit bd1244561fa2a4531ded40dbf09c9599084f8b29 upstream.
dev_set_name will alloc memory for nvmem->dev.kobj.name in
nvmem_register, when nvmem_validate_keepouts failed, nvmem's
memory will be freed and return, but nobody will free memory
for nvmem->dev.kobj.name, there will be memleak, so moving
nvmem_validate_keepouts() after device_register() and let
the device core deal with cleaning name in error cases.
Fixes: de0534df9347 ("nvmem: core: fix error handling while validating keepout regions")
Cc: stable@vger.kernel.org
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220916120402.38753-1-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Varun Prakash <varun@chelsio.com>
Date: Wed Sep 21 00:06:49 2022 +0530
nvmet-tcp: add bounds check on Transfer Tag
[ Upstream commit b6a545ffa2c192b1e6da4a7924edac5ba9f4ea2b ]
ttag is used as an index to get cmd in nvmet_tcp_handle_h2c_data_pdu(),
add a bounds check to avoid out-of-bounds access.
Signed-off-by: Varun Prakash <varun@chelsio.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Sami Tolvanen <samitolvanen@google.com>
Date: Thu Sep 8 14:54:58 2022 -0700
objtool: Preserve special st_shndx indexes in elf_update_symbol
[ Upstream commit 5141d3a06b2da1731ac82091298b766a1f95d3d8 ]
elf_update_symbol fails to preserve the special st_shndx values
between [SHN_LORESERVE, SHN_HIRESERVE], which results in it
converting SHN_ABS entries into SHN_UNDEF, for example. Explicitly
check for the special indexes and ensure these symbols are not
marked undefined.
Fixes: ead165fa1042 ("objtool: Fix symbol creation")
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220908215504.3686827-17-samitolvanen@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Eric Dumazet <edumazet@google.com>
Date: Sat Oct 1 13:51:02 2022 -0700
once: add DO_ONCE_SLOW() for sleepable contexts
[ Upstream commit 62c07983bef9d3e78e71189441e1a470f0d1e653 ]
Christophe Leroy reported a ~80ms latency spike
happening at first TCP connect() time.
This is because __inet_hash_connect() uses get_random_once()
to populate a perturbation table which became quite big
after commit 4c2c8f03a5ab ("tcp: increase source port perturb table to 2^16")
get_random_once() uses DO_ONCE(), which block hard irqs for the duration
of the operation.
This patch adds DO_ONCE_SLOW() which uses a mutex instead of a spinlock
for operations where we prefer to stay in process context.
Then __inet_hash_connect() can use get_random_slow_once()
to populate its perturbation table.
Fixes: 4c2c8f03a5ab ("tcp: increase source port perturb table to 2^16")
Fixes: 190cc82489f4 ("tcp: change source port randomizarion at connect() time")
Reported-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/netdev/CANn89iLAEYBaoYajy0Y9UmGFff5GPxDUoG-ErVB2jDdRNQ5Tug@mail.gmail.com/T/#t
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willy Tarreau <w@1wt.eu>
Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Mike Pattrick <mkp@redhat.com>
Date: Wed Aug 17 11:06:34 2022 -0400
openvswitch: Fix double reporting of drops in dropwatch
[ Upstream commit 1100248a5c5ccd57059eb8d02ec077e839a23826 ]
Frames sent to userspace can be reported as dropped in
ovs_dp_process_packet, however, if they are dropped in the netlink code
then netlink_attachskb will report the same frame as dropped.
This patch checks for error codes which indicate that the frame has
already been freed.
Signed-off-by: Mike Pattrick <mkp@redhat.com>
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2109946
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Mike Pattrick <mkp@redhat.com>
Date: Wed Aug 17 11:06:35 2022 -0400
openvswitch: Fix overreporting of drops in dropwatch
[ Upstream commit c21ab2afa2c64896a7f0e3cbc6845ec63dcfad2e ]
Currently queue_userspace_packet will call kfree_skb for all frames,
whether or not an error occurred. This can result in a single dropped
frame being reported as multiple drops in dropwatch. This functions
caller may also call kfree_skb in case of an error. This patch will
consume the skbs instead and allow caller's to use kfree_skb.
Signed-off-by: Mike Pattrick <mkp@redhat.com>
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2109957
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Helge Deller <deller@gmx.de>
Date: Fri Oct 14 10:13:55 2022 +0200
parisc: fbdev/stifb: Align graphics memory size to 4MB
commit aca7c13d3bee81a968337a5515411409ae9d095d upstream.
Independend of the current graphics resolution, adjust the reported
graphics card memory size to the next 4MB boundary.
This fixes the fbtest program which expects a naturally aligned size.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Maciej W. Rozycki <macro@orcam.me.uk>
Date: Wed Sep 21 20:49:16 2022 +0100
PCI: Sanitise firmware BAR assignments behind a PCI-PCI bridge
commit 0e32818397426a688f598f35d3bc762eca6d7592 upstream.
When pci_assign_resource() is unable to assign resources to a BAR, it uses
pci_revert_fw_address() to fall back to a firmware assignment (if any).
Previously pci_revert_fw_address() assumed all addresses could reach the
device, but this is not true if the device is below a bridge that only
forwards addresses within its windows.
This problem was observed on a Tyan Tomcat IV S1564D system where the BIOS
did not assign valid addresses to several bridges and USB devices:
pci 0000:00:11.0: PCI-to-PCIe bridge to [bus 01-ff]
pci 0000:00:11.0: bridge window [io 0xe000-0xefff]
pci 0000:01:00.0: PCIe Upstream Port to [bus 02-ff]
pci 0000:01:00.0: bridge window [io 0x0000-0x0fff] # unreachable
pci 0000:02:02.0: PCIe Downstream Port to [bus 05-ff]
pci 0000:02:02.0: bridge window [io 0x0000-0x0fff] # unreachable
pci 0000:05:00.0: PCIe-to-PCI bridge to [bus 06-ff]
pci 0000:05:00.0: bridge window [io 0x0000-0x0fff] # unreachable
pci 0000:06:08.0: USB UHCI 1.1
pci 0000:06:08.0: BAR 4: [io 0xfce0-0xfcff] # unreachable
pci 0000:06:08.1: USB UHCI 1.1
pci 0000:06:08.1: BAR 4: [io 0xfce0-0xfcff] # unreachable
pci 0000:06:08.0: can't claim BAR 4 [io 0xfce0-0xfcff]: no compatible bridge window
pci 0000:06:08.1: can't claim BAR 4 [io 0xfce0-0xfcff]: no compatible bridge window
During the first pass of assigning unassigned resources, there was not
enough I/O space available, so we couldn't assign the 06:08.0 BAR and
reverted to the firmware assignment (still unreachable). Reverting the
06:08.1 assignment failed because it conflicted with 06:08.0:
pci 0000:00:11.0: bridge window [io 0xe000-0xefff]
pci 0000:01:00.0: no space for bridge window [io size 0x2000]
pci 0000:02:02.0: no space for bridge window [io size 0x1000]
pci 0000:05:00.0: no space for bridge window [io size 0x1000]
pci 0000:06:08.0: BAR 4: no space for [io size 0x0020]
pci 0000:06:08.0: BAR 4: trying firmware assignment [io 0xfce0-0xfcff]
pci 0000:06:08.1: BAR 4: no space for [io size 0x0020]
pci 0000:06:08.1: BAR 4: trying firmware assignment [io 0xfce0-0xfcff]
pci 0000:06:08.1: BAR 4: [io 0xfce0-0xfcff] conflicts with 0000:06:08.0 [io 0xfce0-0xfcff]
A subsequent pass assigned valid bridge windows and a valid 06:08.1 BAR,
but left the 06:08.0 BAR alone, so the UHCI device was still unusable:
pci 0000:00:11.0: bridge window [io 0xe000-0xefff] released
pci 0000:00:11.0: bridge window [io 0x1000-0x2fff] # reassigned
pci 0000:01:00.0: bridge window [io 0x1000-0x2fff] # reassigned
pci 0000:02:02.0: bridge window [io 0x2000-0x2fff] # reassigned
pci 0000:05:00.0: bridge window [io 0x2000-0x2fff] # reassigned
pci 0000:06:08.0: BAR 4: assigned [io 0xfce0-0xfcff] # left alone
pci 0000:06:08.1: BAR 4: assigned [io 0x2000-0x201f]
...
uhci_hcd 0000:06:08.0: host system error, PCI problems?
uhci_hcd 0000:06:08.0: host controller process error, something bad happened!
uhci_hcd 0000:06:08.0: host controller halted, very bad!
uhci_hcd 0000:06:08.0: HCRESET not completed yet!
uhci_hcd 0000:06:08.0: HC died; cleaning up
If the address assigned by firmware is not reachable because it's not
within upstream bridge windows, fail instead of assigning the unusable
address from firmware.
[bhelgaas: commit log, use pci_upstream_bridge()]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=16263
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2203012338460.46819@angie.orcam.me.uk
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2209211921250.29493@angie.orcam.me.uk
Fixes: 58c84eda0756 ("PCI: fall back to original BIOS BAR addresses")
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org # v2.6.35+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Adrian Hunter <adrian.hunter@intel.com>
Date: Wed Oct 12 11:22:58 2022 +0300
perf intel-pt: Fix segfault in intel_pt_print_info() with uClibc
commit 5a3d47071f0ced0431ef82a5fb6bd077ed9493db upstream.
uClibc segfaulted because NULL was passed as the format to fprintf().
That happened because one of the format strings was missing and
intel_pt_print_info() didn't check that before calling fprintf().
Add the missing format string, and check format is not NULL before calling
fprintf().
Fixes: 11fa7cb86b56d361 ("perf tools: Pass Intel PT information for decoding MTC and CYC")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221012082259.22394-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Liang He <windhl@126.com>
Date: Thu Sep 15 17:35:06 2022 +0800
phy: amlogic: phy-meson-axg-mipi-pcie-analog: Hold reference returned by of_get_parent()
[ Upstream commit c4c349be07aeec5f397a349046dc5fc0f2657691 ]
As the of_get_parent() will increase the refcount of the node->parent
and the reference will be discarded, so we should hold the reference
with which we can decrease the refcount when done.
Fixes: 8eff8b4e22d9 ("phy: amlogic: phy-meson-axg-mipi-pcie-analog: add support for MIPI DSI analog")
Signed-off-by: Liang He <windhl@126.com>
Link: https://lore.kernel.org/r/20220915093506.4009456-1-windhl@126.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Chunfeng Yun <chunfeng.yun@mediatek.com>
Date: Wed Sep 14 14:07:46 2022 +0800
phy: phy-mtk-tphy: fix the phy type setting issue
[ Upstream commit 931c05a8cb1be029ef2fbc1e4af313d4cb297c47 ]
The PHY type is not set if the index is non zero, prepare type
value according to the index, like as mask value.
Fixes: 39099a443358 ("phy: phy-mtk-tphy: support type switch by pericfg")
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220914060746.10004-7-chunfeng.yun@mediatek.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dongliang Mu <mudongliangabcd@gmail.com>
Date: Wed Sep 14 13:13:33 2022 +0800
phy: qualcomm: call clk_disable_unprepare in the error handling
[ Upstream commit c3966ced8eb8dc53b6c8d7f97d32cc8a2107d83e ]
Smatch reports the following error:
drivers/phy/qualcomm/phy-qcom-usb-hsic.c:82 qcom_usb_hsic_phy_power_on()
warn: 'uphy->cal_clk' from clk_prepare_enable() not released on lines:
58.
drivers/phy/qualcomm/phy-qcom-usb-hsic.c:82 qcom_usb_hsic_phy_power_on()
warn: 'uphy->cal_sleep_clk' from clk_prepare_enable() not released on
lines: 58.
drivers/phy/qualcomm/phy-qcom-usb-hsic.c:82 qcom_usb_hsic_phy_power_on()
warn: 'uphy->phy_clk' from clk_prepare_enable() not released on lines:
58.
Fix this by calling proper clk_disable_unprepare calls.
Fixes: 0b56e9a7e835 ("phy: Group vendor specific phy drivers")
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20220914051334.69282-1-dzm91@hust.edu.cn
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Date: Fri Sep 30 15:20:32 2022 +0200
pinctrl: rockchip: add pinmux_ops.gpio_set_direction callback
commit 4635c0e2a7f7f3568cbfccae70121f9835efa62c upstream.
Before the split of gpio and pinctrl sections in their own driver,
rockchip_set_mux was called in pinmux_ops.gpio_set_direction for
configuring a pin in its GPIO function.
This is essential for cases where pinctrl is "bypassed" by gpio
consumers otherwise the GPIO function is not configured for the pin and
it does not work. Such was the case for the sysfs/libgpiod userspace
GPIO handling.
Let's re-implement the pinmux_ops.gpio_set_direction callback so that
the gpio subsystem can request from the pinctrl driver to put the pin in
its GPIO function.
Fixes: 9ce9a02039de ("pinctrl/rockchip: drop the gpio related codes")
Cc: stable@vger.kernel.org
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Link: https://lore.kernel.org/r/20220930132033.4003377-2-foss+kernel@0leil.net
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jameson Thies <jthies@google.com>
Date: Tue Sep 13 20:49:54 2022 +0000
platform/chrome: cros_ec: Notify the PM of wake events during resume
[ Upstream commit 8edd2752b0aa498b3a61f3caee8f79f7e0567fad ]
cros_ec_handle_event in the cros_ec driver can notify the PM of wake
events. When a device is suspended, cros_ec_handle_event will not check
MKBP events. Instead, received MKBP events are checked during resume by
cros_ec_report_events_during_suspend. But
cros_ec_report_events_during_suspend cannot notify the PM if received
events are wake events, causing wake events to not be reported if
received while the device is suspended.
Update cros_ec_report_events_during_suspend to notify the PM of wake
events during resume by calling pm_wakeup_event.
Signed-off-by: Jameson Thies <jthies@google.com>
Reviewed-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220913204954.2931042-1-jthies@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Patryk Duda <pdk@semihalf.com>
Date: Tue Aug 2 17:41:28 2022 +0200
platform/chrome: cros_ec_proto: Update version on GET_NEXT_EVENT failure
commit f74c7557ed0d321947e8bb4e9d47c1013f8b2227 upstream.
Some EC based devices (e.g. Fingerpint MCU) can jump to RO part of the
firmware (intentionally or due to device reboot). The RO part doesn't
change during the device lifecycle, so it won't support newer version
of EC_CMD_GET_NEXT_EVENT command.
Function cros_ec_query_all() is responsible for finding maximum
supported MKBP event version. It's usually called when the device is
running RW part of the firmware, so the command version can be
potentially higher than version supported by the RO.
The problem was fixed by updating maximum supported version when the
device returns EC_RES_INVALID_VERSION (mapped to -ENOPROTOOPT). That way
the kernel will use highest common version supported by RO and RW.
Fixes: 3300fdd630d4 ("platform/chrome: cros_ec: handle MKBP more events flag")
Cc: <stable@vger.kernel.org> # 5.10+
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Patryk Duda <pdk@semihalf.com>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220802154128.21175-1-pdk@semihalf.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Prashant Malani <pmalani@chromium.org>
Date: Fri Aug 19 19:08:03 2022 +0000
platform/chrome: cros_ec_typec: Correct alt mode index
[ Upstream commit 4e477663e396f48c5cfc5f2d75d4b514f409516a ]
Alt mode indices used by USB PD (Power Delivery) start with 1, not 0.
Update the alt mdoe registration code to factor this in to the alt mode
descriptor.
Fixes: de0f49487db3 ("platform/chrome: cros_ec_typec: Register partner altmodes")
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220819190807.1275937-3-pmalani@chromium.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Rustam Subkhankulov <subkhankulov@ispras.ru>
Date: Sun Aug 14 01:08:43 2022 +0300
platform/chrome: fix double-free in chromeos_laptop_prepare()
[ Upstream commit 6ad4194d6a1e1d11b285989cd648ef695b4a93c0 ]
If chromeos_laptop_prepare_i2c_peripherals() fails after allocating memory
for 'cros_laptop->i2c_peripherals', this memory is freed at 'err_out' label
and nonzero value is returned. Then chromeos_laptop_destroy() is called,
resulting in double-free error.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Rustam Subkhankulov <subkhankulov@ispras.ru>
Fixes: 5020cd29d8bf ("platform/chrome: chromeos_laptop - supply properties for ACPI devices")
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220813220843.2373004-1-subkhankulov@ispras.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dan Carpenter <error27@gmail.com>
Date: Fri Aug 19 08:20:36 2022 +0300
platform/chrome: fix memory corruption in ioctl
[ Upstream commit 8a07b45fd3c2dda24fad43639be5335a4595196a ]
If "s_mem.bytes" is larger than the buffer size it leads to memory
corruption.
Fixes: eda2e30c6684 ("mfd / platform: cros_ec: Miscellaneous character device to talk with the EC")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/Yv8dpCFZJdbUT5ye@kili
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Hans de Goede <hdegoede@redhat.com>
Date: Sat Sep 17 23:04:07 2022 +0200
platform/x86: msi-laptop: Change DMI match / alias strings to fix module autoloading
[ Upstream commit 2a2565272a3628e45d61625e36ef17af7af4e3de ]
On a MSI S270 with Fedora 37 x86_64 / systemd-251.4 the module does not
properly autoload.
This is likely caused by issues with how systemd-udevd handles the single
quote char (') which is part of the sys_vendor / chassis_vendor strings
on this laptop. As a workaround remove the single quote char + everything
behind it from the sys_vendor + chassis_vendor matches. This fixes
the module not autoloading.
Link: https://github.com/systemd/systemd/issues/24715
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220917210407.647432-1-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Hans de Goede <hdegoede@redhat.com>
Date: Thu Aug 25 16:13:34 2022 +0200
platform/x86: msi-laptop: Fix old-ec check for backlight registering
[ Upstream commit 83ac7a1c2ed5f17caa07cbbc84bad3c05dc3bf22 ]
Commit 2cc6c717799f ("msi-laptop: Port to new backlight interface
selection API") replaced this check:
if (!quirks->old_ec_model || acpi_video_backlight_support())
pr_info("Brightness ignored, ...");
else
do_register();
With:
if (quirks->old_ec_model ||
acpi_video_get_backlight_type() == acpi_backlight_vendor)
do_register();
But since the do_register() part was part of the else branch, the entire
condition should be inverted. So not only the 2 statements on either
side of the || should be inverted, but the || itself should be replaced
with a &&.
In practice this has likely not been an issue because the new-ec models
(old_ec_model==false) likely all support ACPI video backlight control,
making acpi_video_get_backlight_type() return acpi_backlight_video
turning the second part of the || also false when old_ec_model == false.
Fixes: 2cc6c717799f ("msi-laptop: Port to new backlight interface selection API")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220825141336.208597-1-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Hans de Goede <hdegoede@redhat.com>
Date: Thu Aug 25 16:13:36 2022 +0200
platform/x86: msi-laptop: Fix resource cleanup
[ Upstream commit 5523632aa10f906dfe2eb714ee748590dc7fc6b1 ]
Fix the input-device not getting free-ed on probe-errors and
fix the msi_touchpad_dwork not getting cancelled on neither
probe-errors nor on remove.
Fixes: 143a4c0284dc ("msi-laptop: send out touchpad on/off key")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220825141336.208597-3-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Wei Yongjun <weiyongjun1@huawei.com>
Date: Sat Aug 27 07:32:23 2022 +0000
power: supply: adp5061: fix out-of-bounds read in adp5061_get_chg_type()
[ Upstream commit 9d47e01b9d807808224347935562f7043a358054 ]
ADP5061_CHG_STATUS_1_CHG_STATUS is masked with 0x07, which means a length
of 8, but adp5061_chg_type array size is 4, may end up reading 4 elements
beyond the end of the adp5061_chg_type[] array.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Chao Qin <chao.qin@intel.com>
Date: Tue Sep 20 14:08:26 2022 +0800
powercap: intel_rapl: fix UBSAN shift-out-of-bounds issue
[ Upstream commit 2d93540014387d1c73b9ccc4d7895320df66d01b ]
When value < time_unit, the parameter of ilog2() will be zero and
the return value is -1. u64(-1) is too large for shift exponent
and then will trigger shift-out-of-bounds:
shift exponent 18446744073709551615 is too large for 32-bit type 'int'
Call Trace:
rapl_compute_time_window_core
rapl_write_data_raw
set_time_window
store_constraint_time_window_us
Signed-off-by: Chao Qin <chao.qin@intel.com>
Acked-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Zhang Rui <rui.zhang@intel.com>
Date: Sat Sep 24 13:47:36 2022 +0800
powercap: intel_rapl: Use standard Energy Unit for SPR Dram RAPL domain
commit 4c081324df5608b73428662ca54d5221ea03a6bd upstream.
Intel Xeon servers used to use a fixed energy resolution (15.3uj) for
Dram RAPL domain. But on SPR, Dram RAPL domain follows the standard
energy resolution as described in MSR_RAPL_POWER_UNIT.
Remove the SPR dram_domain_energy_unit quirk.
Fixes: 2d798d9f5967 ("powercap: intel_rapl: add support for Sapphire Rapids")
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Wang Wendy <wendy.wang@intel.com>
Cc: 5.9+ <stable@vger.kernel.org> # 5.9+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Nicholas Piggin <npiggin@gmail.com>
Date: Wed Sep 21 11:41:02 2022 +1000
powerpc/64s: Fix GENERIC_CPU build flags for PPC970 / G5
[ Upstream commit 58ec7f06b74e0d6e76c4110afce367c8b5f0837d ]
Big-endian GENERIC_CPU supports 970, but builds with -mcpu=power5.
POWER5 is ISA v2.02 whereas 970 is v2.01 plus Altivec. 2.02 added
the popcntb instruction which a compiler might use.
Use -mcpu=power4.
Fixes: 471d7ff8b51b ("powerpc/64s: Remove POWER4 support")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220921014103.587954-1-npiggin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Pali Rohár <pali@kernel.org>
Date: Sat Aug 27 15:44:54 2022 +0200
powerpc/boot: Explicitly disable usage of SPE instructions
commit 110a58b9f91c66f743c01a2c217243d94c899c23 upstream.
uImage boot wrapper should not use SPE instructions, like kernel itself.
Boot wrapper has already disabled Altivec and VSX instructions but not SPE.
Options -mno-spe and -mspe=no already set when compilation of kernel, but
not when compiling uImage wrapper yet. Fix it.
Cc: stable@vger.kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220827134454.17365-1-pali@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Michael Ellerman <mpe@ellerman.id.au>
Date: Thu Sep 1 11:42:53 2022 +1000
powerpc/configs: Properly enable PAPR_SCM in pseries_defconfig
[ Upstream commit aa398d88aea4ec863bd7aea35d5035a37096dc59 ]
My commit to add PAPR_SCM to pseries_defconfig failed to add the
required dependencies, meaning the driver doesn't get built.
Add the required LIBNVDIMM=m.
Fixes: d6481a7195df ("powerpc/configs: Add PAPR_SCM to pseries_defconfig")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220901014253.252927-1-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Li Huafei <lihuafei1@huawei.com>
Date: Fri Sep 23 17:32:53 2022 +0800
powerpc/kprobes: Fix null pointer reference in arch_prepare_kprobe()
[ Upstream commit 97f88a3d723162781d6cbfdc7b9617eefab55b19 ]
I found a null pointer reference in arch_prepare_kprobe():
# echo 'p cmdline_proc_show' > kprobe_events
# echo 'p cmdline_proc_show+16' >> kprobe_events
Kernel attempted to read user page (0) - exploit attempt? (uid: 0)
BUG: Kernel NULL pointer dereference on read at 0x00000000
Faulting instruction address: 0xc000000000050bfc
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA PowerNV
Modules linked in:
CPU: 0 PID: 122 Comm: sh Not tainted 6.0.0-rc3-00007-gdcf8e5633e2e #10
NIP: c000000000050bfc LR: c000000000050bec CTR: 0000000000005bdc
REGS: c0000000348475b0 TRAP: 0300 Not tainted (6.0.0-rc3-00007-gdcf8e5633e2e)
MSR: 9000000000009033 <SF,HV,EE,ME,IR,DR,RI,LE> CR: 88002444 XER: 20040006
CFAR: c00000000022d100 DAR: 0000000000000000 DSISR: 40000000 IRQMASK: 0
...
NIP arch_prepare_kprobe+0x10c/0x2d0
LR arch_prepare_kprobe+0xfc/0x2d0
Call Trace:
0xc0000000012f77a0 (unreliable)
register_kprobe+0x3c0/0x7a0
__register_trace_kprobe+0x140/0x1a0
__trace_kprobe_create+0x794/0x1040
trace_probe_create+0xc4/0xe0
create_or_delete_trace_kprobe+0x2c/0x80
trace_parse_run_command+0xf0/0x210
probes_write+0x20/0x40
vfs_write+0xfc/0x450
ksys_write+0x84/0x140
system_call_exception+0x17c/0x3a0
system_call_vectored_common+0xe8/0x278
--- interrupt: 3000 at 0x7fffa5682de0
NIP: 00007fffa5682de0 LR: 0000000000000000 CTR: 0000000000000000
REGS: c000000034847e80 TRAP: 3000 Not tainted (6.0.0-rc3-00007-gdcf8e5633e2e)
MSR: 900000000280f033 <SF,HV,VEC,VSX,EE,PR,FP,ME,IR,DR,RI,LE> CR: 44002408 XER: 00000000
The address being probed has some special:
cmdline_proc_show: Probe based on ftrace
cmdline_proc_show+16: Probe for the next instruction at the ftrace location
The ftrace-based kprobe does not generate kprobe::ainsn::insn, it gets
set to NULL. In arch_prepare_kprobe() it will check for:
...
prev = get_kprobe(p->addr - 1);
preempt_enable_no_resched();
if (prev && ppc_inst_prefixed(ppc_inst_read(prev->ainsn.insn))) {
...
If prev is based on ftrace, 'ppc_inst_read(prev->ainsn.insn)' will occur
with a null pointer reference. At this point prev->addr will not be a
prefixed instruction, so the check can be skipped.
Check if prev is ftrace-based kprobe before reading 'prev->ainsn.insn'
to fix this problem.
Fixes: b4657f7650ba ("powerpc/kprobes: Don't allow breakpoints on suffixes")
Signed-off-by: Li Huafei <lihuafei1@huawei.com>
[mpe: Trim oops]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220923093253.177298-1-lihuafei1@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Nathan Chancellor <nathan@kernel.org>
Date: Fri Sep 2 18:00:08 2022 +0200
powerpc/math_emu/efp: Include module.h
[ Upstream commit cfe0d370e0788625ce0df3239aad07a2506c1796 ]
When building with a recent version of clang, there are a couple of
errors around the call to module_init():
arch/powerpc/math-emu/math_efp.c:927:1: error: type specifier missing, defaults to 'int'; ISO C99 and later do not support implicit int [-Wimplicit-int]
module_init(spe_mathemu_init);
^
int
arch/powerpc/math-emu/math_efp.c:927:13: error: a parameter list without types is only allowed in a function definition
module_init(spe_mathemu_init);
^
2 errors generated.
module_init() is a macro, which is not getting expanded because module.h
is not included in this file. Add the include so that the macro can
expand properly, clearing up the build failure.
Fixes: ac6f120369ff ("powerpc/85xx: Workaroudn e500 CPU erratum A005")
[chleroy: added fixes tag]
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/8403854a4c187459b2f4da3537f51227b70b9223.1662134272.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Liang He <windhl@126.com>
Date: Fri Jul 1 21:17:50 2022 +0800
powerpc/pci_dn: Add missing of_node_put()
[ Upstream commit 110a1fcb6c4d55144d8179983a475f17a1d6f832 ]
In pci_add_device_node_info(), use of_node_put() to drop the reference
to 'parent' returned by of_get_parent() to keep refcount balance.
Fixes: cca87d303c85 ("powerpc/pci: Refactor pci_dn")
Co-authored-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Link: https://lore.kernel.org/r/20220701131750.240170-1-windhl@126.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Zheng Yongjun <zhengyongjun3@huawei.com>
Date: Tue Sep 6 14:17:03 2022 +0000
powerpc/powernv: add missing of_node_put() in opal_export_attrs()
[ Upstream commit 71a92e99c47900cc164620948b3863382cec4f1a ]
After using 'np' returned by of_find_node_by_path(), of_node_put()
need be called to decrease the refcount.
Fixes: 11fe909d2362 ("powerpc/powernv: Add OPAL exports attributes to sysfs")
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220906141703.118192-1-zhengyongjun3@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Haren Myneni <haren@linux.ibm.com>
Date: Wed Sep 28 18:57:33 2022 -0700
powerpc/pseries/vas: Pass hw_cpu_id to node associativity HCALL
[ Upstream commit f3e5d9e53e74d77e711a2c90a91a8b0836a9e0b3 ]
Generally the hypervisor decides to allocate a window on different
VAS instances. But if user space wishes to allocate on the current VAS
instance where the process is executing, the kernel has to pass
associativity domain IDs to allocate VAS window HCALL.
To determine the associativity domain IDs for the current CPU,
smp_processor_id() is passed to node associativity HCALL which may
return H_P2 (-55) error during DLPAR CPU event. This is because Linux
CPU numbers (smp_processor_id()) are not the same as the hypervisor's
view of CPU numbers.
Fix the issue by passing hard_smp_processor_id() with
VPHN_FLAG_VCPU flag (PAPR 14.11.6.1 H_HOME_NODE_ASSOCIATIVITY).
Fixes: b22f2d88e435 ("powerpc/pseries/vas: Integrate API with open/close windows")
Reviewed-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
[mpe: Update change log to mention Linux vs HV CPU numbers]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/55380253ea0c11341824cd4c0fc6bbcfc5752689.camel@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Liang He <windhl@126.com>
Date: Mon Jul 4 22:52:33 2022 +0800
powerpc/sysdev/fsl_msi: Add missing of_node_put()
[ Upstream commit def435c04ee984a5f9ed2711b2bfe946936c6a21 ]
In fsl_setup_msi_irqs(), use of_node_put() to drop the reference
returned by of_parse_phandle().
Fixes: 895d603f945ba ("powerpc/fsl_msi: add support for the fsl, msi property in PCI nodes")
Co-authored-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220704145233.278539-1-windhl@126.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Rohan McLure <rmclure@linux.ibm.com>
Date: Wed Sep 21 16:55:48 2022 +1000
powerpc: Fix fallocate and fadvise64_64 compat parameter combination
[ Upstream commit 016ff72bd2090903715c0f9422a44afbb966f4ee ]
As reported[1] by Arnd, the arch-specific fadvise64_64 and fallocate
compatibility handlers assume parameters are passed with 32-bit
big-endian ABI. This affects the assignment of odd-even parameter pairs
to the high or low words of a 64-bit syscall parameter.
Fix fadvise64_64 fallocate compat handlers to correctly swap upper/lower
32 bits conditioned on endianness.
A future patch will replace the arch-specific compat fallocate with an
asm-generic implementation. This patch is intended for ease of
back-port.
[1]: https://lore.kernel.org/all/be29926f-226e-48dc-871a-e29a54e80583@www.fastmail.com/
Fixes: 57f48b4b74e7 ("powerpc/compat_sys: swap hi/lo parts of 64-bit syscall args in LE mode")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rohan McLure <rmclure@linux.ibm.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220921065605.1051927-9-rmclure@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Pali Rohár <pali@kernel.org>
Date: Fri Sep 2 23:21:02 2022 +0200
powerpc: Fix SPE Power ISA properties for e500v1 platforms
[ Upstream commit 37b9345ce7f4ab17538ea62def6f6d430f091355 ]
Commit 2eb28006431c ("powerpc/e500v2: Add Power ISA properties to comply
with ePAPR 1.1") introduced new include file e500v2_power_isa.dtsi and
should have used it for all e500v2 platforms. But apparently it was used
also for e500v1 platforms mpc8540, mpc8541, mpc8555 and mpc8560.
e500v1 cores compared to e500v2 do not support double precision floating
point SPE instructions. Hence power-isa-sp.fd should not be set on e500v1
platforms, which is in e500v2_power_isa.dtsi include file.
Fix this issue by introducing a new e500v1_power_isa.dtsi include file and
use it in all e500v1 device tree files.
Fixes: 2eb28006431c ("powerpc/e500v2: Add Power ISA properties to comply with ePAPR 1.1")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220902212103.22534-1-pali@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Zhihao Cheng <chengzhihao1@huawei.com>
Date: Fri Sep 23 21:45:52 2022 +0800
quota: Check next/prev free block number after reading from quota file
commit 6c8ea8b8cd4722efd419f91ca46a2dc81b7d89a3 upstream.
Following process:
Init: v2_read_file_info: <3> dqi_free_blk 0 dqi_free_entry 5 dqi_blks 6
Step 1. chown bin f_a -> dquot_acquire -> v2_write_dquot:
qtree_write_dquot
do_insert_tree
find_free_dqentry
get_free_dqblk
write_blk(info->dqi_blocks) // info->dqi_blocks = 6, failure. The
content in physical block (corresponding to blk 6) is random.
Step 2. chown root f_a -> dquot_transfer -> dqput_all -> dqput ->
ext4_release_dquot -> v2_release_dquot -> qtree_delete_dquot:
dquot_release
remove_tree
free_dqentry
put_free_dqblk(6)
info->dqi_free_blk = blk // info->dqi_free_blk = 6
Step 3. drop cache (buffer head for block 6 is released)
Step 4. chown bin f_b -> dquot_acquire -> commit_dqblk -> v2_write_dquot:
qtree_write_dquot
do_insert_tree
find_free_dqentry
get_free_dqblk
dh = (struct qt_disk_dqdbheader *)buf
blk = info->dqi_free_blk // 6
ret = read_blk(info, blk, buf) // The content of buf is random
info->dqi_free_blk = le32_to_cpu(dh->dqdh_next_free) // random blk
Step 5. chown bin f_c -> notify_change -> ext4_setattr -> dquot_transfer:
dquot = dqget -> acquire_dquot -> ext4_acquire_dquot -> dquot_acquire ->
commit_dqblk -> v2_write_dquot -> dq_insert_tree:
do_insert_tree
find_free_dqentry
get_free_dqblk
blk = info->dqi_free_blk // If blk < 0 and blk is not an error
code, it will be returned as dquot
transfer_to[USRQUOTA] = dquot // A random negative value
__dquot_transfer(transfer_to)
dquot_add_inodes(transfer_to[cnt])
spin_lock(&dquot->dq_dqb_lock) // page fault
, which will lead to kernel page fault:
Quota error (device sda): qtree_write_dquot: Error -8000 occurred
while creating quota
BUG: unable to handle page fault for address: ffffffffffffe120
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
Oops: 0002 [#1] PREEMPT SMP
CPU: 0 PID: 5974 Comm: chown Not tainted 6.0.0-rc1-00004
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
RIP: 0010:_raw_spin_lock+0x3a/0x90
Call Trace:
dquot_add_inodes+0x28/0x270
__dquot_transfer+0x377/0x840
dquot_transfer+0xde/0x540
ext4_setattr+0x405/0x14d0
notify_change+0x68e/0x9f0
chown_common+0x300/0x430
__x64_sys_fchownat+0x29/0x40
In order to avoid accessing invalid quota memory address, this patch adds
block number checking of next/prev free block read from quota file.
Fetch a reproducer in [Link].
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216372
Fixes: 1da177e4c3f4152 ("Linux-2.6.12-rc2")
CC: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220923134555.2623931-2-chengzhihao1@huawei.com
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Andrew Gaul <gaul@gaul.org>
Date: Sun Oct 2 12:41:28 2022 +0900
r8152: Rate limit overflow messages
[ Upstream commit 93e2be344a7db169b7119de21ac1bf253b8c6907 ]
My system shows almost 10 million of these messages over a 24-hour
period which pollutes my logs.
Signed-off-by: Andrew Gaul <gaul@google.com>
Link: https://lore.kernel.org/r/20221002034128.2026653-1-gaul@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Zqiang <qiang1.zhang@intel.com>
Date: Tue Jul 12 16:26:05 2022 +0800
rcu-tasks: Convert RCU_LOCKDEP_WARN() to WARN_ONCE()
[ Upstream commit fcd53c8a4dfa38bafb89efdd0b0f718f3a03f884 ]
Kernels built with CONFIG_PROVE_RCU=y and CONFIG_DEBUG_LOCK_ALLOC=y
attempt to emit a warning when the synchronize_rcu_tasks_generic()
function is called during early boot while the rcu_scheduler_active
variable is RCU_SCHEDULER_INACTIVE. However the warnings is not
actually be printed because the debug_lockdep_rcu_enabled() returns
false, exactly because the rcu_scheduler_active variable is still equal
to RCU_SCHEDULER_INACTIVE.
This commit therefore replaces RCU_LOCKDEP_WARN() with WARN_ONCE()
to force these warnings to actually be printed.
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Zqiang <qiang1.zhang@intel.com>
Date: Mon Aug 8 10:26:26 2022 +0800
rcu: Avoid triggering strict-GP irq-work when RCU is idle
[ Upstream commit 621189a1fe93cb2b34d62c5cdb9e258bca044813 ]
Kernels built with PREEMPT_RCU=y and RCU_STRICT_GRACE_PERIOD=y trigger
irq-work from rcu_read_unlock(), and the resulting irq-work handler
invokes rcu_preempt_deferred_qs_handle(). The point of this triggering
is to force grace periods to end quickly in order to give tools like KASAN
a better chance of detecting RCU usage bugs such as leaking RCU-protected
pointers out of an RCU read-side critical section.
However, this irq-work triggering is unconditional. This works, but
there is no point in doing this irq-work unless the current grace period
is waiting on the running CPU or task, which is not the common case.
After all, in the common case there are many rcu_read_unlock() calls
per CPU per grace period.
This commit therefore triggers the irq-work only when the current grace
period is waiting on the running CPU or task.
This change was tested as follows on a four-CPU system:
echo rcu_preempt_deferred_qs_handler > /sys/kernel/debug/tracing/set_ftrace_filter
echo 1 > /sys/kernel/debug/tracing/function_profile_enabled
insmod rcutorture.ko
sleep 20
rmmod rcutorture.ko
echo 0 > /sys/kernel/debug/tracing/function_profile_enabled
echo > /sys/kernel/debug/tracing/set_ftrace_filter
This procedure produces results in this per-CPU set of files:
/sys/kernel/debug/tracing/trace_stat/function*
Sample output from one of these files is as follows:
Function Hit Time Avg s^2
-------- --- ---- --- ---
rcu_preempt_deferred_qs_handle 838746 182650.3 us 0.217 us 0.004 us
The baseline sum of the "Hit" values (the number of calls to this
function) was 3,319,015. With this commit, that sum was 1,140,359,
for a 2.9x reduction. The worst-case variance across the CPUs was less
than 25%, so this large effect size is statistically significant.
The raw data is available in the Link: URL.
Link: https://lore.kernel.org/all/20220808022626.12825-1-qiang1.zhang@intel.com/
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Michal Hocko <mhocko@suse.com>
Date: Wed Jun 22 13:47:11 2022 +0200
rcu: Back off upon fill_page_cache_func() allocation failure
[ Upstream commit 093590c16b447f53e66771c8579ae66c96f6ef61 ]
The fill_page_cache_func() function allocates couple of pages to store
kvfree_rcu_bulk_data structures. This is a lightweight (GFP_NORETRY)
allocation which can fail under memory pressure. The function will,
however keep retrying even when the previous attempt has failed.
This retrying is in theory correct, but in practice the allocation is
invoked from workqueue context, which means that if the memory reclaim
gets stuck, these retries can hog the worker for quite some time.
Although the workqueues subsystem automatically adjusts concurrency, such
adjustment is not guaranteed to happen until the worker context sleeps.
And the fill_page_cache_func() function's retry loop is not guaranteed
to sleep (see the should_reclaim_retry() function).
And we have seen this function cause workqueue lockups:
kernel: BUG: workqueue lockup - pool cpus=93 node=1 flags=0x1 nice=0 stuck for 32s!
[...]
kernel: pool 74: cpus=37 node=0 flags=0x1 nice=0 hung=32s workers=2 manager: 2146
kernel: pwq 498: cpus=249 node=1 flags=0x1 nice=0 active=4/256 refcnt=5
kernel: in-flight: 1917:fill_page_cache_func
kernel: pending: dbs_work_handler, free_work, kfree_rcu_monitor
Originally, we thought that the root cause of this lockup was several
retries with direct reclaim, but this is not yet confirmed. Furthermore,
we have seen similar lockups without any heavy memory pressure. This
suggests that there are other factors contributing to these lockups.
However, it is not really clear that endless retries are desireable.
So let's make the fill_page_cache_func() function back off after
allocation failure.
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Mark Zhang <markzhang@nvidia.com>
Date: Thu Sep 8 13:09:02 2022 +0300
RDMA/cm: Use SLID in the work completion as the DLID in responder side
[ Upstream commit b7d95040c13f61a4a6a859c5355faf583eff9658 ]
The responder should always use WC's SLID as the dlid, to follow the
IB SPEC section "13.5.4.2 COMMON RESPONSE ACTIONS":
A responder always takes the following actions in constructing a
response packet:
- The SLID of the received packet is used as the DLID in the response
packet.
Fixes: ac3a949fb2ff ("IB/CM: Set appropriate slid and dlid when handling CM request")
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Link: https://lore.kernel.org/r/cd17c240231e059d2fc07c17dfe555d548b917eb.1662631201.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Sindhu-Devale <sindhu.devale@intel.com>
Date: Wed Sep 7 14:13:23 2022 -0500
RDMA/irdma: Align AE id codes to correct flush code and event
[ Upstream commit 7f51a961f8c6b84752a48e950074a8c4a0808d91 ]
A number of asynchronous event (AE) ids were not aligned to the
correct flush_code and event_type. Fix these up so that the
correct IBV error and event codes are returned to application.
Also, add handling for new AE ids like IRDMA_AE_INVALID_REQUEST to
return the correct WC error code.
Fixes: 44d9e52977a1 ("RDMA/irdma: Implement device initialization definitions")
Signed-off-by: Sindhu-Devale <sindhu.devale@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Link: https://lore.kernel.org/r/20220907191324.1173-2-shiraz.saleem@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Aharon Landau <aharonl@nvidia.com>
Date: Sun Jul 31 11:26:36 2022 +0300
RDMA/mlx5: Don't compare mkey tags in DEVX indirect mkey
[ Upstream commit 13ad1125b941a5f257d9d3ae70485773abd34792 ]
According to the ib spec:
If the CI supports the Base Memory Management Extensions defined in this
specification, the L_Key format must consist of:
24 bit index in the most significant bits of the R_Key, and
8 bit key in the least significant bits of the R_Key
Through a successful Allocate L_Key verb invocation, the CI must let the
consumer own the key portion of the returned R_Key
Therefore, when creating a mkey using DEVX, the consumer is allowed to
change the key part. The kernel should compare only the index part of a
R_Key to determine equality with another R_Key.
Adding capability in order not to break backward compatibility.
Fixes: 534fd7aac56a ("IB/mlx5: Manage indirection mkey upon DEVX flow for ODP")
Link: https://lore.kernel.org/r/3d669aacea85a3a15c3b3b953b3eaba3f80ef9be.1659255945.git.leonro@nvidia.com
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Zhu Yanjun <yanjun.zhu@linux.dev>
Date: Sun Aug 21 21:16:13 2022 -0400
RDMA/rxe: Fix "kernel NULL pointer dereference" error
[ Upstream commit a625ca30eff806395175ebad3ac1399014bdb280 ]
When rxe_queue_init in the function rxe_qp_init_req fails,
both qp->req.task.func and qp->req.task.arg are not initialized.
Because of creation of qp fails, the function rxe_create_qp will
call rxe_qp_do_cleanup to handle allocated resource.
Before calling __rxe_do_task, both qp->req.task.func and
qp->req.task.arg should be checked.
Fixes: 8700e3e7c485 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20220822011615.805603-2-yanjun.zhu@linux.dev
Reported-by: syzbot+ab99dc4c6e961eed8b8e@syzkaller.appspotmail.com
Signed-off-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Bob Pearson <rpearsonhpe@gmail.com>
Date: Thu Aug 25 17:14:47 2022 -0500
RDMA/rxe: Fix resize_finish() in rxe_queue.c
[ Upstream commit fda5d0cf8aef12f0a4f714a96a4b2fce039a3e55 ]
Currently in resize_finish() in rxe_queue.c there is a loop which copies
the entries in the original queue into a newly allocated queue. The
termination logic for this loop is incorrect. The call to
queue_next_index() updates cons but has no effect on whether the queue is
empty. So if the queue starts out empty nothing is copied but if it is not
then the loop will run forever. This patch changes the loop to compare the
value of cons to the original producer index.
Fixes: ae6e843fe08d0 ("RDMA/rxe: Add memory barriers to kernel queues")
Link: https://lore.kernel.org/r/20220825221446.6512-1-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Zhu Yanjun <yanjun.zhu@linux.dev>
Date: Sun Aug 21 21:16:14 2022 -0400
RDMA/rxe: Fix the error caused by qp->sk
[ Upstream commit 548ce2e66725dcba4e27d1e8ac468d5dd17fd509 ]
When sock_create_kern in the function rxe_qp_init_req fails,
qp->sk is set to NULL.
Then the function rxe_create_qp will call rxe_qp_do_cleanup
to handle allocated resource.
Before handling qp->sk, this variable should be checked.
Fixes: 8700e3e7c485 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20220822011615.805603-3-yanjun.zhu@linux.dev
Signed-off-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Bernard Metzler <bmt@zurich.ibm.com>
Date: Tue Sep 20 10:12:02 2022 +0200
RDMA/siw: Always consume all skbuf data in sk_data_ready() upcall.
[ Upstream commit 754209850df8367c954ac1de7671c7430b1f342c ]
For header and trailer/padding processing, siw did not consume new
skb data until minimum amount present to fill current header or trailer
structure, including potential payload padding. Not consuming any
data during upcall may cause a receive stall, since tcp_read_sock()
is not upcalling again if no new data arrive.
A NFSoRDMA client got stuck at RDMA Write reception of unaligned
payload, if the current skb did contain only the expected 3 padding
bytes, but not the 4 bytes CRC trailer. Expecting 4 more bytes already
arrived in another skb, and not consuming those 3 bytes in the current
upcall left the Write incomplete, waiting for the CRC forever.
Fixes: 8b6a361b8c48 ("rdma/siw: receive path")
Reported-by: Olga Kornievskaia <kolga@netapp.com>
Tested-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Link: https://lore.kernel.org/r/20220920081202.223629-1-bmt@zurich.ibm.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Bernard Metzler <bmt@zurich.ibm.com>
Date: Tue Sep 20 10:25:03 2022 +0200
RDMA/siw: Fix QP destroy to wait for all references dropped.
[ Upstream commit a3c278807a459e6f50afee6971cabe74cccfb490 ]
Delay QP destroy completion until all siw references to QP are
dropped. The calling RDMA core will free QP structure after
successful return from siw_qp_destroy() call, so siw must not
hold any remaining reference to the QP upon return.
A use-after-free was encountered in xfstest generic/460, while
testing NFSoRDMA. Here, after a TCP connection drop by peer,
the triggered siw_cm_work_handler got delayed until after
QP destroy call, referencing a QP which has already freed.
Fixes: 303ae1cdfdf7 ("rdma/siw: application interface")
Reported-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Link: https://lore.kernel.org/r/20220920082503.224189-1-bmt@zurich.ibm.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Bart Van Assche <bvanassche@acm.org>
Date: Thu Sep 8 16:31:39 2022 -0700
RDMA/srp: Fix srp_abort()
[ Upstream commit 6dbe4a8dead84de474483910b02ec9e6a10fc1a9 ]
Fix the code for converting a SCSI command pointer into an SRP request
pointer.
Cc: Xiao Yang <yangx.jy@fujitsu.com>
Fixes: ad215aaea4f9 ("RDMA/srp: Make struct scsi_cmnd and struct srp_request adjacent")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220908233139.3042628-1-bvanassche@acm.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Patrick Rudolph <patrick.rudolph@9elements.com>
Date: Fri Sep 9 14:59:53 2022 +0200
regulator: core: Prevent integer underflow
[ Upstream commit 8d8e16592022c9650df8aedfe6552ed478d7135b ]
By using a ratio of delay to poll_enabled_time that is not integer
time_remaining underflows and does not exit the loop as expected.
As delay could be derived from DT and poll_enabled_time is defined
in the driver this can easily happen.
Use a signed iterator to make sure that the loop exits once
the remaining time is negative.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Link: https://lore.kernel.org/r/20220909125954.577669-1-patrick.rudolph@9elements.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Linus Walleij <linus.walleij@linaro.org>
Date: Fri Sep 9 13:25:29 2022 +0200
regulator: qcom_rpm: Fix circular deferral regression
commit 8478ed5844588703a1a4c96a004b1525fbdbdd5e upstream.
On recent kernels, the PM8058 L16 (or any other PM8058 LDO-regulator)
does not come up if they are supplied by an SMPS-regulator. This
is not very strange since the regulators are registered in a long
array and the L-regulators are registered before the S-regulators,
and if an L-regulator defers, it will never get around to registering
the S-regulator that it needs.
See arch/arm/boot/dts/qcom-apq8060-dragonboard.dts:
pm8058-regulators {
(...)
vdd_l13_l16-supply = <&pm8058_s4>;
(...)
Ooops.
Fix this by moving the PM8058 S-regulators first in the array.
Do the same for the PM8901 S-regulators (though this is currently
not causing any problems with out device trees) so that the pattern
of registration order is the same on all PMnnnn chips.
Fixes: 087a1b5cdd55 ("regulator: qcom: Rework to single platform device")
Cc: stable@vger.kernel.org
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Konrad Dybcio <konrad.dybcio@somainline.org>
Cc: linux-arm-msm@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220909112529.239143-1-linus.walleij@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Hamza Mahfooz <hamza.mahfooz@amd.com>
Date: Wed Oct 5 11:30:38 2022 -0400
Revert "drm/amdgpu: use dirty framebuffer helper"
commit 17d819e2828cacca2e4c909044eb9798ed379cd2 upstream.
This reverts commit 66f99628eb24409cb8feb5061f78283c8b65f820.
Unfortunately, that commit causes performance regressions on non-PSR
setups. So, just revert it until FB_DAMAGE_CLIPS support can be added.
Cc: stable@vger.kernel.org
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2189
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216554
Fixes: 66f99628eb2440 ("drm/amdgpu: use dirty framebuffer helper")
Fixes: abbc7a3dafb91b ("drm/amdgpu: don't register a dirty callback for non-atomic")
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Sasha Levin <sashal@kernel.org>
Date: Sat Oct 15 07:18:38 2022 -0400
Revert "fs: check FMODE_LSEEK to control internal pipe splicing"
This reverts commit fd0a6e99b61e6c08fa5cf585d54fd956f70c73a6.
Which was upstream commit 97ef77c52b789ec1411d360ed99dca1efe4b2c81.
The commit is missing dependencies and breaks NFS tests, remove it for
now.
Reported-by: Saeed Mirzamohammadi <saeed.mirzamohammadi@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Alexander Aring <aahringo@redhat.com>
Date: Tue Oct 4 21:47:49 2022 -0400
Revert "net/ieee802154: reject zero-sized raw_sendmsg()"
[ Upstream commit 2eb2756f6c9e9621e022d78321ce40a62c4520b5 ]
This reverts commit 3a4d061c699bd3eedc80dc97a4b2a2e1af83c6f5.
There is a v2 which does return zero if zero length is given.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20221005014750.3685555-1-aahringo@redhat.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: sunghwan jung <onenowy@gmail.com>
Date: Tue Sep 13 20:49:13 2022 +0900
Revert "usb: storage: Add quirk for Samsung Fit flash"
[ Upstream commit ad5dbfc123e6ffbbde194e2a4603323e09f741ee ]
This reverts commit 86d92f5465958752481269348d474414dccb1552,
which fix the timeout issue for "Samsung Fit Flash".
But the commit affects not only "Samsung Fit Flash" but also other usb
storages that use the same controller and causes severe performance
regression.
# hdparm -t /dev/sda (without the quirk)
Timing buffered disk reads: 622 MB in 3.01 seconds = 206.66 MB/sec
# hdparm -t /dev/sda (with the quirk)
Timing buffered disk reads: 220 MB in 3.00 seconds = 73.32 MB/sec
The commit author mentioned that "Issue was reproduced after device has
bad block", so this quirk should be applied when we have the timeout
issue with a device that has bad blocks.
We revert the commit so that we apply this quirk by adding kernel
paramters using a bootloader or other ways when we really need it,
without the performance regression with devices that don't have the
issue.
Signed-off-by: sunghwan jung <onenowy@gmail.com>
Link: https://lore.kernel.org/r/20220913114913.3073-1-onenowy@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Steven Rostedt (Google) <rostedt@goodmis.org>
Date: Wed Sep 28 13:39:38 2022 -0400
ring-buffer: Add ring_buffer_wake_waiters()
commit 7e9fbbb1b776d8d7969551565bc246f74ec53b27 upstream.
On closing of a file that represents a ring buffer or flushing the file,
there may be waiters on the ring buffer that needs to be woken up and exit
the ring_buffer_wait() function.
Add ring_buffer_wake_waiters() to wake up the waiters on the ring buffer
and allow them to exit the wait loop.
Link: https://lkml.kernel.org/r/20220928133938.28dc2c27@gandalf.local.home
Cc: stable@vger.kernel.org
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes: 15693458c4bc0 ("tracing/ring-buffer: Move poll wake ups into ring buffer code")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Steven Rostedt (Google) <rostedt@goodmis.org>
Date: Tue Sep 27 14:43:17 2022 -0400
ring-buffer: Allow splice to read previous partially read pages
commit fa8f4a89736b654125fb254b0db753ac68a5fced upstream.
If a page is partially read, and then the splice system call is run
against the ring buffer, it will always fail to read, no matter how much
is in the ring buffer. That's because the code path for a partial read of
the page does will fail if the "full" flag is set.
The splice system call wants full pages, so if the read of the ring buffer
is not yet full, it should return zero, and the splice will block. But if
a previous read was done, where the beginning has been consumed, it should
still be given to the splice caller if the rest of the page has been
written to.
This caused the splice command to never consume data in this scenario, and
let the ring buffer just fill up and lose events.
Link: https://lkml.kernel.org/r/20220927144317.46be6b80@gandalf.local.home
Cc: stable@vger.kernel.org
Fixes: 8789a9e7df6bf ("ring-buffer: read page interface")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Steven Rostedt (Google) <rostedt@goodmis.org>
Date: Tue Sep 27 19:15:25 2022 -0400
ring-buffer: Check pending waiters when doing wake ups as well
commit ec0bbc5ec5664dcee344f79373852117dc672c86 upstream.
The wake up waiters only checks the "wakeup_full" variable and not the
"full_waiters_pending". The full_waiters_pending is set when a waiter is
added to the wait queue. The wakeup_full is only set when an event is
triggered, and it clears the full_waiters_pending to avoid multiple calls
to irq_work_queue().
The irq_work callback really needs to check both wakeup_full as well as
full_waiters_pending such that this code can be used to wake up waiters
when a file is closed that represents the ring buffer and the waiters need
to be woken up.
Link: https://lkml.kernel.org/r/20220927231824.209460321@goodmis.org
Cc: stable@vger.kernel.org
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes: 15693458c4bc0 ("tracing/ring-buffer: Move poll wake ups into ring buffer code")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Steven Rostedt (Google) <rostedt@goodmis.org>
Date: Thu Sep 29 10:49:09 2022 -0400
ring-buffer: Fix race between reset page and reading page
commit a0fcaaed0c46cf9399d3a2d6e0c87ddb3df0e044 upstream.
The ring buffer is broken up into sub buffers (currently of page size).
Each sub buffer has a pointer to its "tail" (the last event written to the
sub buffer). When a new event is requested, the tail is locally
incremented to cover the size of the new event. This is done in a way that
there is no need for locking.
If the tail goes past the end of the sub buffer, the process of moving to
the next sub buffer takes place. After setting the current sub buffer to
the next one, the previous one that had the tail go passed the end of the
sub buffer needs to be reset back to the original tail location (before
the new event was requested) and the rest of the sub buffer needs to be
"padded".
The race happens when a reader takes control of the sub buffer. As readers
do a "swap" of sub buffers from the ring buffer to get exclusive access to
the sub buffer, it replaces the "head" sub buffer with an empty sub buffer
that goes back into the writable portion of the ring buffer. This swap can
happen as soon as the writer moves to the next sub buffer and before it
updates the last sub buffer with padding.
Because the sub buffer can be released to the reader while the writer is
still updating the padding, it is possible for the reader to see the event
that goes past the end of the sub buffer. This can cause obvious issues.
To fix this, add a few memory barriers so that the reader definitely sees
the updates to the sub buffer, and also waits until the writer has put
back the "tail" of the sub buffer back to the last event that was written
on it.
To be paranoid, it will only spin for 1 second, otherwise it will
warn and shutdown the ring buffer code. 1 second should be enough as
the writer does have preemption disabled. If the writer doesn't move
within 1 second (with preemption disabled) something is horribly
wrong. No interrupt should last 1 second!
Link: https://lore.kernel.org/all/20220830120854.7545-1-jiazi.li@transsion.com/
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216369
Link: https://lkml.kernel.org/r/20220929104909.0650a36c@gandalf.local.home
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: stable@vger.kernel.org
Fixes: c7b0930857e22 ("ring-buffer: prevent adding write in discarded area")
Reported-by: Jiazi.Li <jiazi.li@transsion.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Steven Rostedt (Google) <rostedt@goodmis.org>
Date: Tue Sep 27 19:15:24 2022 -0400
ring-buffer: Have the shortest_full queue be the shortest not longest
commit 3b19d614b61b93a131f463817e08219c9ce1fee3 upstream.
The logic to know when the shortest waiters on the ring buffer should be
woken up or not has uses a less than instead of a greater than compare,
which causes the shortest_full to actually be the longest.
Link: https://lkml.kernel.org/r/20220927231823.718039222@goodmis.org
Cc: stable@vger.kernel.org
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes: 2c2b0a78b3739 ("ring-buffer: Add percentage of ring buffer full to wake up reader")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Maciej W. Rozycki <macro@orcam.me.uk>
Date: Thu Sep 22 22:56:06 2022 +0100
RISC-V: Make port I/O string accessors actually work
commit 9cc205e3c17d5716da7ebb7fa0c985555e95d009 upstream.
Fix port I/O string accessors such as `insb', `outsb', etc. which use
the physical PCI port I/O address rather than the corresponding memory
mapping to get at the requested location, which in turn breaks at least
accesses made by our parport driver to a PCIe parallel port such as:
PCI parallel port detected: 1415:c118, I/O at 0x1000(0x1008), IRQ 20
parport0: PC-style at 0x1000 (0x1008), irq 20, using FIFO [PCSPP,TRISTATE,COMPAT,EPP,ECP]
causing a memory access fault:
Unable to handle kernel access to user memory without uaccess routines at virtual address 0000000000001008
Oops [#1]
Modules linked in:
CPU: 1 PID: 350 Comm: cat Not tainted 6.0.0-rc2-00283-g10d4879f9ef0-dirty #23
Hardware name: SiFive HiFive Unmatched A00 (DT)
epc : parport_pc_fifo_write_block_pio+0x266/0x416
ra : parport_pc_fifo_write_block_pio+0xb4/0x416
epc : ffffffff80542c3e ra : ffffffff80542a8c sp : ffffffd88899fc60
gp : ffffffff80fa2700 tp : ffffffd882b1e900 t0 : ffffffd883d0b000
t1 : ffffffffff000002 t2 : 4646393043330a38 s0 : ffffffd88899fcf0
s1 : 0000000000001000 a0 : 0000000000000010 a1 : 0000000000000000
a2 : ffffffd883d0a010 a3 : 0000000000000023 a4 : 00000000ffff8fbb
a5 : ffffffd883d0a001 a6 : 0000000100000000 a7 : ffffffc800000000
s2 : ffffffffff000002 s3 : ffffffff80d28880 s4 : ffffffff80fa1f50
s5 : 0000000000001008 s6 : 0000000000000008 s7 : ffffffd883d0a000
s8 : 0004000000000000 s9 : ffffffff80dc1d80 s10: ffffffd8807e4000
s11: 0000000000000000 t3 : 00000000000000ff t4 : 393044410a303930
t5 : 0000000000001000 t6 : 0000000000040000
status: 0000000200000120 badaddr: 0000000000001008 cause: 000000000000000f
[<ffffffff80543212>] parport_pc_compat_write_block_pio+0xfe/0x200
[<ffffffff8053bbc0>] parport_write+0x46/0xf8
[<ffffffff8050530e>] lp_write+0x158/0x2d2
[<ffffffff80185716>] vfs_write+0x8e/0x2c2
[<ffffffff80185a74>] ksys_write+0x52/0xc2
[<ffffffff80185af2>] sys_write+0xe/0x16
[<ffffffff80003770>] ret_from_syscall+0x0/0x2
---[ end trace 0000000000000000 ]---
For simplicity address the problem by adding PCI_IOBASE to the physical
address requested in the respective wrapper macros only, observing that
the raw accessors such as `__insb', `__outsb', etc. are not supposed to
be used other than by said macros. Remove the cast to `long' that is no
longer needed on `addr' now that it is used as an offset from PCI_IOBASE
and add parentheses around `addr' needed for predictable evaluation in
macro expansion. No need to make said adjustments in separate changes
given that current code is gravely broken and does not ever work.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Fixes: fab957c11efe2 ("RISC-V: Atomic and Locking Code")
Cc: stable@vger.kernel.org # v4.15+
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2209220223080.29493@angie.orcam.me.uk
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Andrew Bresticker <abrestic@rivosinc.com>
Date: Thu Sep 15 15:37:02 2022 -0400
riscv: Allow PROT_WRITE-only mmap()
commit 9e2e6042a7ec6504fe8e366717afa2f40cf16488 upstream.
Commit 2139619bcad7 ("riscv: mmap with PROT_WRITE but no PROT_READ is
invalid") made mmap() return EINVAL if PROT_WRITE was set wihtout
PROT_READ with the justification that a write-only PTE is considered a
reserved PTE permission bit pattern in the privileged spec. This check
is unnecessary since we let VM_WRITE imply VM_READ on RISC-V, and it is
inconsistent with other architectures that don't support write-only PTEs,
creating a potential software portability issue. Just remove the check
altogether and let PROT_WRITE imply PROT_READ as is the case on other
architectures.
Note that this also allows PROT_WRITE|PROT_EXEC mappings which were
disallowed prior to the aforementioned commit; PROT_READ is implied in
such mappings as well.
Fixes: 2139619bcad7 ("riscv: mmap with PROT_WRITE but no PROT_READ is invalid")
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Andrew Bresticker <abrestic@rivosinc.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220915193702.2201018-3-abrestic@rivosinc.com/
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Wenting Zhang <zephray@outlook.com>
Date: Fri Jul 8 16:38:22 2022 -0400
riscv: always honor the CONFIG_CMDLINE_FORCE when parsing dtb
commit 10f6913c548b32ecb73801a16b120e761c6957ea upstream.
When CONFIG_CMDLINE_FORCE is enabled, cmdline provided by
CONFIG_CMDLINE are always used. This allows CONFIG_CMDLINE to be
used regardless of the result of device tree scanning.
This especially fixes the case where a device tree without the
chosen node is supplied to the kernel. In such cases,
early_init_dt_scan would return true. But inside
early_init_dt_scan_chosen, the cmdline won't be updated as there
is no chosen node in the device tree. As a result, CONFIG_CMDLINE
is not copied into boot_command_line even if CONFIG_CMDLINE_FORCE
is enabled. This commit allows properly update boot_command_line
in this situation.
Fixes: 8fd6e05c7463 ("arch: riscv: support kernel command line forcing when no DTB passed")
Signed-off-by: Wenting Zhang <zephray@outlook.com>
Reviewed-by: Björn Töpel <bjorn@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/PSBPR04MB399135DFC54928AB958D0638B1829@PSBPR04MB3991.apcprd04.prod.outlook.com
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Andrew Bresticker <abrestic@rivosinc.com>
Date: Thu Sep 15 15:37:01 2022 -0400
riscv: Make VM_WRITE imply VM_READ
commit 7ab72c597356be1e7f0f3d856e54ce78527f43c8 upstream.
RISC-V does not presently have write-only mappings as that PTE bit pattern
is considered reserved in the privileged spec, so allow handling of read
faults in VMAs that have VM_WRITE without VM_READ in order to be consistent
with other architectures that have similar limitations.
Fixes: 2139619bcad7 ("riscv: mmap with PROT_WRITE but no PROT_READ is invalid")
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Andrew Bresticker <abrestic@rivosinc.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220915193702.2201018-2-abrestic@rivosinc.com/
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Fangrui Song <maskray@google.com>
Date: Sun Sep 18 02:29:34 2022 -0700
riscv: Pass -mno-relax only on lld < 15.0.0
commit 3cebf80e9a0d3adcb174053be32c88a640b3344b upstream.
lld since llvm:6611d58f5bbc ("[ELF] Relax R_RISCV_ALIGN"), which will be
included in the 15.0.0 release, has implemented some RISC-V linker
relaxation. -mno-relax is no longer needed in
KBUILD_CFLAGS/KBUILD_AFLAGS to suppress R_RISCV_ALIGN which older lld
can not handle:
ld.lld: error: capability.c:(.fixup+0x0): relocation R_RISCV_ALIGN
requires unimplemented linker relaxation; recompile with -mno-relax
but the .o is already compiled with -mno-relax
Signed-off-by: Fangrui Song <maskray@google.com>
Link: https://lore.kernel.org/r/20220710071117.446112-1-maskray@google.com/
Link: https://lore.kernel.org/r/20220918092933.19943-1-palmer@rivosinc.com
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Conor Dooley <conor.dooley@microchip.com>
Date: Fri Jul 15 18:51:56 2022 +0100
riscv: topology: fix default topology reporting
commit fbd92809997a391f28075f1c8b5ee314c225557c upstream.
RISC-V has no sane defaults to fall back on where there is no cpu-map
in the devicetree.
Without sane defaults, the package, core and thread IDs are all set to
-1. This causes user-visible inaccuracies for tools like hwloc/lstopo
which rely on the sysfs cpu topology files to detect a system's
topology.
On a PolarFire SoC, which should have 4 harts with a thread each,
lstopo currently reports:
Machine (793MB total)
Package L#0
NUMANode L#0 (P#0 793MB)
Core L#0
L1d L#0 (32KB) + L1i L#0 (32KB) + PU L#0 (P#0)
L1d L#1 (32KB) + L1i L#1 (32KB) + PU L#1 (P#1)
L1d L#2 (32KB) + L1i L#2 (32KB) + PU L#2 (P#2)
L1d L#3 (32KB) + L1i L#3 (32KB) + PU L#3 (P#3)
Adding calls to store_cpu_topology() in {boot,smp} hart bringup code
results in the correct topolgy being reported:
Machine (793MB total)
Package L#0
NUMANode L#0 (P#0 793MB)
L1d L#0 (32KB) + L1i L#0 (32KB) + Core L#0 + PU L#0 (P#0)
L1d L#1 (32KB) + L1i L#1 (32KB) + Core L#1 + PU L#1 (P#1)
L1d L#2 (32KB) + L1i L#2 (32KB) + Core L#2 + PU L#2 (P#2)
L1d L#3 (32KB) + L1i L#3 (32KB) + Core L#3 + PU L#3 (P#3)
CC: stable@vger.kernel.org # 456797da792f: arm64: topology: move store_cpu_topology() to shared code
Fixes: 03f11f03dbfe ("RISC-V: Parse cpu topology during boot.")
Reported-by: Brice Goglin <Brice.Goglin@inria.fr>
Link: https://github.com/open-mpi/hwloc/issues/536
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Letu Ren <fantasquex@gmail.com>
Date: Mon Aug 29 19:01:15 2022 +0800
scsi: 3w-9xxx: Avoid disabling device if failing to enable it
[ Upstream commit 7eff437b5ee1309b34667844361c6bbb5c97df05 ]
The original code will "goto out_disable_device" and call
pci_disable_device() if pci_enable_device() fails. The kernel will generate
a warning message like "3w-9xxx 0000:00:05.0: disabling already-disabled
device".
We shouldn't disable a device that failed to be enabled. A simple return is
fine.
Link: https://lore.kernel.org/r/20220829110115.38789-1-fantasquex@gmail.com
Reported-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Letu Ren <fantasquex@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Mike Christie <michael.christie@oracle.com>
Date: Thu Jun 16 17:45:50 2022 -0500
scsi: iscsi: Add recv workqueue helpers
[ Upstream commit 8af809966c0b34cfacd8da9a412689b8e9910354 ]
Add helpers to allow the drivers to run their recv paths from libiscsi's
workqueue.
Link: https://lore.kernel.org/r/20220616224557.115234-3-michael.christie@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Stable-dep-of: 57569c37f0ad ("scsi: iscsi: iscsi_tcp: Fix null-ptr-deref while calling getpeername()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Mike Christie <michael.christie@oracle.com>
Date: Wed Sep 7 17:17:00 2022 -0500
scsi: iscsi: iscsi_tcp: Fix null-ptr-deref while calling getpeername()
[ Upstream commit 57569c37f0add1b6489e1a1563c71519daf732cf ]
Fix a NULL pointer crash that occurs when we are freeing the socket at the
same time we access it via sysfs.
The problem is that:
1. iscsi_sw_tcp_conn_get_param() and iscsi_sw_tcp_host_get_param() take
the frwd_lock and do sock_hold() then drop the frwd_lock. sock_hold()
does a get on the "struct sock".
2. iscsi_sw_tcp_release_conn() does sockfd_put() which does the last put
on the "struct socket" and that does __sock_release() which sets the
sock->ops to NULL.
3. iscsi_sw_tcp_conn_get_param() and iscsi_sw_tcp_host_get_param() then
call kernel_getpeername() which accesses the NULL sock->ops.
Above we do a get on the "struct sock", but we needed a get on the "struct
socket". Originally, we just held the frwd_lock the entire time but in
commit bcf3a2953d36 ("scsi: iscsi: iscsi_tcp: Avoid holding spinlock while
calling getpeername()") we switched to refcount based because the network
layer changed and started taking a mutex in that path, so we could no
longer hold the frwd_lock.
Instead of trying to maintain multiple refcounts, this just has us use a
mutex for accessing the socket in the interface code paths.
Link: https://lore.kernel.org/r/20220907221700.10302-1-michael.christie@oracle.com
Fixes: bcf3a2953d36 ("scsi: iscsi: iscsi_tcp: Avoid holding spinlock while calling getpeername()")
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Mike Christie <michael.christie@oracle.com>
Date: Thu Jun 16 17:45:49 2022 -0500
scsi: iscsi: Rename iscsi_conn_queue_work()
[ Upstream commit 4b9f8ce4d5e823e42944c5a0a4842b0f936365ad ]
Rename iscsi_conn_queue_work() to iscsi_conn_queue_xmit() to reflect that
it handles queueing of xmits only.
Link: https://lore.kernel.org/r/20220616224557.115234-2-michael.christie@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Wu Bo <wubo40@huawei.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Stable-dep-of: 57569c37f0ad ("scsi: iscsi: iscsi_tcp: Fix null-ptr-deref while calling getpeername()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Mike Christie <michael.christie@oracle.com>
Date: Thu Jun 16 17:45:51 2022 -0500
scsi: iscsi: Run recv path from workqueue
[ Upstream commit f1d269765ee29da56b32818b7a08054484ed89f2 ]
We don't always want to run the recv path from the network softirq because
when we have to have multiple sessions sharing the same CPUs, some sessions
can eat up the NAPI softirq budget and affect other sessions or users.
Allow us to queue the recv handling to the iscsi workqueue so we can have
the scheduler/wq code try to balance the work and CPU use across all
sessions' worker threads.
Note: It wasn't the original intent of the change but a nice side effect is
that for some workloads/configs we get a nice performance boost. For a
simple read heavy test:
fio --direct=1 --filename=/dev/dm-0 --rw=randread --bs=256K
--ioengine=libaio --iodepth=128 --numjobs=4
where the iscsi threads, fio jobs, and rps_cpus share CPUs we see a 32%
throughput boost. We also see increases for small I/O IOPs tests but it's
not as high.
Link: https://lore.kernel.org/r/20220616224557.115234-4-michael.christie@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Stable-dep-of: 57569c37f0ad ("scsi: iscsi: iscsi_tcp: Fix null-ptr-deref while calling getpeername()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Duoming Zhou <duoming@zju.edu.cn>
Date: Tue Sep 20 22:42:13 2022 +0800
scsi: libsas: Fix use-after-free bug in smp_execute_task_sg()
[ Upstream commit 46ba53c30666717cb06c2b3c5d896301cd00d0c0 ]
When executing SMP task failed, the smp_execute_task_sg() calls del_timer()
to delete "slow_task->timer". However, if the timer handler
sas_task_internal_timedout() is running, the del_timer() in
smp_execute_task_sg() will not stop it and a UAF will happen. The process
is shown below:
(thread 1) | (thread 2)
smp_execute_task_sg() | sas_task_internal_timedout()
... |
del_timer() |
... | ...
sas_free_task(task) |
kfree(task->slow_task) //FREE|
| task->slow_task->... //USE
Fix by calling del_timer_sync() in smp_execute_task_sg(), which makes sure
the timer handler have finished before the "task->slow_task" is
deallocated.
Link: https://lore.kernel.org/r/20220920144213.10536-1-duoming@zju.edu.cn
Fixes: 2908d778ab3e ("[SCSI] aic94xx: new driver")
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Saurav Kashyap <skashyap@marvell.com>
Date: Mon Sep 19 06:44:34 2022 -0700
scsi: qedf: Populate sysfs attributes for vport
commit 592642e6b11e620e4b43189f8072752429fc8dc3 upstream.
Few vport parameters were displayed by systool as 'Unknown' or 'NULL'.
Copy speed, supported_speed, frame_size and update port_type for NPIV port.
Link: https://lore.kernel.org/r/20220919134434.3513-1-njavali@marvell.com
Cc: stable@vger.kernel.org
Tested-by: Guangwu Zhang <guazhang@redhat.com>
Reviewed-by: John Meneghini <jmeneghi@redhat.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Arun Easi <aeasi@marvell.com>
Date: Wed Sep 7 16:33:08 2022 -0700
scsi: tracing: Fix compile error in trace_array calls when TRACING is disabled
[ Upstream commit 1a77dd1c2bb5d4a58c16d198cf593720787c02e4 ]
Fix this compilation error seen when CONFIG_TRACING is not enabled:
drivers/scsi/qla2xxx/qla_os.c: In function 'qla_trace_init':
drivers/scsi/qla2xxx/qla_os.c:2854:25: error: implicit declaration of function
'trace_array_get_by_name'; did you mean 'trace_array_set_clr_event'?
[-Werror=implicit-function-declaration]
2854 | qla_trc_array = trace_array_get_by_name("qla2xxx");
| ^~~~~~~~~~~~~~~~~~~~~~~
| trace_array_set_clr_event
drivers/scsi/qla2xxx/qla_os.c: In function 'qla_trace_uninit':
drivers/scsi/qla2xxx/qla_os.c:2869:9: error: implicit declaration of function
'trace_array_put' [-Werror=implicit-function-declaration]
2869 | trace_array_put(qla_trc_array);
| ^~~~~~~~~~~~~~~
Link: https://lore.kernel.org/r/20220907233308.4153-2-aeasi@marvell.com
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Xin Long <lucien.xin@gmail.com>
Date: Wed Sep 28 14:10:13 2022 -0400
sctp: handle the error returned from sctp_auth_asoc_init_active_key
[ Upstream commit 022152aaebe116a25c39818a07e175a8cd3c1e11 ]
When it returns an error from sctp_auth_asoc_init_active_key(), the
active_key is actually not updated. The old sh_key will be freeed
while it's still used as active key in asoc. Then an use-after-free
will be triggered when sending patckets, as found by syzbot:
sctp_auth_shkey_hold+0x22/0xa0 net/sctp/auth.c:112
sctp_set_owner_w net/sctp/socket.c:132 [inline]
sctp_sendmsg_to_asoc+0xbd5/0x1a20 net/sctp/socket.c:1863
sctp_sendmsg+0x1053/0x1d50 net/sctp/socket.c:2025
inet_sendmsg+0x99/0xe0 net/ipv4/af_inet.c:819
sock_sendmsg_nosec net/socket.c:714 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:734
This patch is to fix it by not replacing the sh_key when it returns
errors from sctp_auth_asoc_init_active_key() in sctp_auth_set_key().
For sctp_auth_set_active_key(), old active_key_id will be set back
to asoc->active_key_id when the same thing happens.
Fixes: 58acd1009226 ("sctp: update active_key for asoc when old key is being replaced")
Reported-by: syzbot+a236dd8e9622ed8954a3@syzkaller.appspotmail.com
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Stefan Berger <stefanb@linux.ibm.com>
Date: Tue Sep 20 09:15:18 2022 -0400
selftest: tpm2: Add Client.__del__() to close /dev/tpm* handle
[ Upstream commit 2d869f0b458547386fbcd8cf3004b271b7347b7f ]
The following output can bee seen when the test is executed:
test_flush_context (tpm2_tests.SpaceTest) ... \
/usr/lib64/python3.6/unittest/case.py:605: ResourceWarning: \
unclosed file <_io.FileIO name='/dev/tpmrm0' mode='rb+' closefd=True>
An instance of Client does not implicitly close /dev/tpm* handle, once it
gets destroyed. Close the file handle in the class destructor
Client.__del__().
Fixes: 6ea3dfe1e0732 ("selftests: add TPM 2.0 tests")
Cc: Shuah Khan <shuah@kernel.org>
Cc: linux-kselftest@vger.kernel.org
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ian Rogers <irogers@google.com>
Date: Thu Sep 1 13:26:45 2022 -0700
selftests/xsk: Avoid use-after-free on ctx
[ Upstream commit af515a5587b8f45f19e11657746e0c89411b0380 ]
The put lowers the reference count to 0 and frees ctx, reading it
afterwards is invalid. Move the put after the uses and determine the
last use by the reference count being 1.
Fixes: 39e940d4abfa ("selftests/xsk: Destroy BPF resources only when ctx refcount drops to 0")
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20220901202645.1463552-1-irogers@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Date: Tue Sep 20 19:12:52 2022 +0200
selinux: use "grep -E" instead of "egrep"
commit c969bb8dbaf2f3628927eae73e7c579a74cf1b6e upstream.
The latest version of grep claims that egrep is now obsolete so the build
now contains warnings that look like:
egrep: warning: egrep is obsolescent; using grep -E
fix this by using "grep -E" instead.
Cc: Paul Moore <paul@paul-moore.com>
Cc: Stephen Smalley <stephen.smalley.work@gmail.com>
Cc: Eric Paris <eparis@parisplace.org>
Cc: selinux@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[PM: tweak to remove vdso reference, cleanup subj line]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Pali Rohár <pali@kernel.org>
Date: Sat Sep 24 12:43:24 2022 +0200
serial: 8250: Fix restoring termios speed after suspend
[ Upstream commit 379a33786d489ab81885ff0b3935cfeb36137fea ]
Since commit edc6afc54968 ("tty: switch to ktermios and new framework")
termios speed is no longer stored only in c_cflag member but also in new
additional c_ispeed and c_ospeed members. If BOTHER flag is set in c_cflag
then termios speed is stored only in these new members.
Since commit 027b57170bf8 ("serial: core: Fix initializing and restoring
termios speed") termios speed is available also in struct console.
So properly restore also c_ispeed and c_ospeed members after suspend to fix
restoring termios speed which is not represented by Bnnn constant.
Fixes: 4516d50aabed ("serial: 8250: Use canary to restart console after suspend")
Signed-off-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/20220924104324.4035-1-pali@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Maciej W. Rozycki <macro@orcam.me.uk>
Date: Wed Sep 21 00:35:32 2022 +0100
serial: 8250: Let drivers request full 16550A feature probing
commit 9906890c89e4dbd900ed87ad3040080339a7f411 upstream.
A SERIAL_8250_16550A_VARIANTS configuration option has been recently
defined that lets one request the 8250 driver not to probe for 16550A
device features so as to reduce the driver's device startup time in
virtual machines.
Some actual hardware devices require these features to have been fully
determined however for their driver to work correctly, so define a flag
to let drivers request full 16550A feature probing on a device-by-device
basis if required regardless of the SERIAL_8250_16550A_VARIANTS option
setting chosen.
Fixes: dc56ecb81a0a ("serial: 8250: Support disabling mdelay-filled probes of 16550A variants")
Cc: stable@vger.kernel.org # v5.6+
Reported-by: Anders Blomdell <anders.blomdell@control.lth.se>
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2209202357520.41633@angie.orcam.me.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Maciej W. Rozycki <macro@orcam.me.uk>
Date: Wed Sep 21 00:35:37 2022 +0100
serial: 8250: Request full 16550A feature probing for OxSemi PCIe devices
commit 00b7a4d4ee42be1c515e56cb1e8ba0f25e271d8e upstream.
Oxford Semiconductor PCIe (Tornado) 950 serial port devices need to
operate in the enhanced mode via the EFR register for the Divide-by-M
N/8 baud rate generator prescaler to be used in their native UART mode.
Otherwise the prescaler is fixed at 1 causing grossly incorrect baud
rates to be programmed.
Accessing the EFR register requires 16550A features to have been probed
for, so request this to happen regardless of SERIAL_8250_16550A_VARIANTS
by setting UPF_FULL_PROBE in port flags.
Fixes: 366f6c955d4d ("serial: 8250: Add proper clock handling for OxSemi PCIe devices")
Cc: stable@vger.kernel.org # v5.19+
Reported-by: Anders Blomdell <anders.blomdell@control.lth.se>
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2209210005040.41633@angie.orcam.me.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Date: Thu Sep 22 10:00:05 2022 +0300
serial: 8250: Toggle IER bits on only after irq has been set up
[ Upstream commit 039d4926379b1d1c17b51cf21c500a5eed86899e ]
Invoking TIOCVHANGUP on 8250_mid port on Ice Lake-D and then reopening
the port triggers these faults during serial8250_do_startup():
DMAR: DRHD: handling fault status reg 3
DMAR: [DMA Write NO_PASID] Request device [00:1a.0] fault addr 0x0 [fault reason 0x05] PTE Write access is not set
If the IRQ hasn't been set up yet, the UART will have zeroes in its MSI
address/data registers. Disabling the IRQ at the interrupt controller
won't stop the UART from performing a DMA write to the address programmed
in its MSI address register (zero) when it wants to signal an interrupt.
The UARTs (in Ice Lake-D) implement PCI 2.1 style MSI without masking
capability, so there is no way to mask the interrupt at the source PCI
function level, except disabling the MSI capability entirely, but that
would cause it to fall back to INTx# assertion, and the PCI specification
prohibits disabling the MSI capability as a way to mask a function's
interrupt service request.
The MSI address register is zeroed by the hangup as the irq is freed.
The interrupt is signalled during serial8250_do_startup() performing a
THRE test that temporarily toggles THRI in IER. The THRE test currently
occurs before UART's irq (and MSI address) is properly set up.
Refactor serial8250_do_startup() such that irq is set up before the
THRE test. The current irq setup code is intermixed with the timer
setup code. As THRE test must be performed prior to the timer setup,
extract it into own function and call it only after the THRE test.
The ->setup_timer() needs to be part of the struct uart_8250_ops in
order to not create circular dependency between 8250 and 8250_base
modules.
Fixes: 40b36daad0ac ("[PATCH] 8250 UART backup timer")
Reported-by: Lennert Buytenhek <buytenh@arista.com>
Tested-by: Lennert Buytenhek <buytenh@arista.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220922070005.2965-1-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Kees Cook <keescook@chromium.org>
Date: Wed Sep 7 16:40:44 2022 -0700
sh: machvec: Use char[] for section boundaries
[ Upstream commit c5783af354688b24abd359f7086c282ec74de993 ]
As done for other sections, define the extern as a character array,
which relaxes many of the compiler-time object size checks, which would
otherwise assume it's a single long. Solves the following build error:
arch/sh/kernel/machvec.c: error: array subscript 'struct sh_machine_vector[0]' is partly outside array bounds of 'long int[1]' [-Werror=array-bounds]: => 105:33
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: linux-sh@vger.kernel.org
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/lkml/alpine.DEB.2.22.394.2209050944290.964530@ramsan.of.borg/
Fixes: 9655ad03af2d ("sh: Fixup machvec support.")
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Rich Felker <dalias@libc.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Liu Jian <liujian56@huawei.com>
Date: Wed Sep 7 15:13:11 2022 +0800
skmsg: Schedule psock work if the cached skb exists on the psock
[ Upstream commit bec217197b412d74168c6a42fc0f76d0cc9cad00 ]
In sk_psock_backlog function, for ingress direction skb, if no new data
packet arrives after the skb is cached, the cached skb does not have a
chance to be added to the receive queue of psock. As a result, the cached
skb cannot be received by the upper-layer application. Fix this by reschedule
the psock work to dispose the cached skb in sk_msg_recvmsg function.
Fixes: 604326b41a6f ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: Liu Jian <liujian56@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20220907071311.60534-1-liujian56@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Date: Fri Sep 16 13:29:10 2022 +0100
slimbus: qcom-ngd-ctrl: allow compile testing without QCOM_RPROC_COMMON
[ Upstream commit e291691c69776ad278cd39dec2306dd39d681a9f ]
The Qualcomm common remote-proc code (CONFIG_QCOM_RPROC_COMMON) has
necessary stubs, so it is not needed for compile testing.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220916122910.170730-5-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 42992cf187e4 ("slimbus: qcom-ngd: Add error handling in of_qcom_slim_ngd_register")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Date: Fri Sep 16 13:29:08 2022 +0100
slimbus: qcom-ngd: cleanup in probe error path
commit 16f14551d0df9e7cd283545d7d748829594d912f upstream.
Add proper error path in probe() to cleanup resources previously
acquired/allocated to fix warnings visible during probe deferral:
notifier callback qcom_slim_ngd_ssr_notify already registered
WARNING: CPU: 6 PID: 70 at kernel/notifier.c:28 notifier_chain_register+0x5c/0x90
Modules linked in:
CPU: 6 PID: 70 Comm: kworker/u16:1 Not tainted 6.0.0-rc3-next-20220830 #380
Call trace:
notifier_chain_register+0x5c/0x90
srcu_notifier_chain_register+0x44/0x90
qcom_register_ssr_notifier+0x38/0x4c
qcom_slim_ngd_ctrl_probe+0xd8/0x400
platform_probe+0x6c/0xe0
really_probe+0xbc/0x2d4
__driver_probe_device+0x78/0xe0
driver_probe_device+0x3c/0x12c
__device_attach_driver+0xb8/0x120
bus_for_each_drv+0x78/0xd0
__device_attach+0xa8/0x1c0
device_initial_probe+0x18/0x24
bus_probe_device+0xa0/0xac
deferred_probe_work_func+0x88/0xc0
process_one_work+0x1d4/0x320
worker_thread+0x2cc/0x44c
kthread+0x110/0x114
ret_from_fork+0x10/0x20
Fixes: e1ae85e1830e ("slimbus: qcom-ngd-ctrl: add Protection Domain Restart Support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220916122910.170730-3-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Date: Fri Sep 16 13:29:07 2022 +0100
slimbus: qcom-ngd: use correct error in message of pdr_add_lookup() failure
commit 5038d21dde818fe74ba1fcb6f2cee35b8c2ebbf2 upstream.
Use correct error code, instead of previous 'ret' value, when printing
error from pdr_add_lookup() failure.
Fixes: e1ae85e1830e ("slimbus: qcom-ngd-ctrl: add Protection Domain Restart Support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220916122910.170730-2-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Steve French <stfrench@microsoft.com>
Date: Fri Oct 14 18:50:20 2022 -0500
smb3: must initialize two ACL struct fields to zero
commit f09bd695af3b8ab46fc24e5d6954a24104c38387 upstream.
Coverity spotted that we were not initalizing Stbz1 and Stbz2 to
zero in create_sd_buf.
Addresses-Coverity: 1513848 ("Uninitialized scalar variable")
Cc: <stable@vger.kernel.org>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Dmitry Osipenko <digetx@gmail.com>
Date: Wed Sep 23 03:34:21 2020 +0300
soc/tegra: fuse: Drop Kconfig dependency on TEGRA20_APB_DMA
[ Upstream commit 2254182807fc09ba9dec9a42ef239e373796f1b2 ]
The DMA subsystem could be entirely disabled in Kconfig and then the
TEGRA20_APB_DMA option isn't available too. Hence kernel configuration
fails if DMADEVICES Kconfig option is disabled due to the unsatisfiable
dependency.
The FUSE driver isn't a critical driver and currently it only provides
NVMEM interface to userspace which isn't known to be widely used, and
thus, it's fine if FUSE driver fails to load.
Let's remove the erroneous Kconfig dependency and let the FUSE driver to
fail the probing if DMA is unavailable.
Fixes: 19d41e5e9c68 ("soc/tegra: fuse: Add APB DMA dependency for Tegra20")
Reported-by: Necip Fazil Yildiran <fazilyildiran@gmail.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=209301
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Liang He <windhl@126.com>
Date: Thu Jul 21 21:52:17 2022 +0800
soc: qcom: smem_state: Add refcounting for the 'state->of_node'
[ Upstream commit 90681f53b9381c23ff7762a3b13826d620c272de ]
In qcom_smem_state_register() and qcom_smem_state_release(), we
should better use of_node_get() and of_node_put() for the reference
creation and destruction of 'device_node'.
Fixes: 9460ae2ff308 ("soc: qcom: Introduce common SMEM state machine code")
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220721135217.1301039-2-windhl@126.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Liang He <windhl@126.com>
Date: Thu Jul 21 21:52:16 2022 +0800
soc: qcom: smsm: Fix refcount leak bugs in qcom_smsm_probe()
[ Upstream commit af8f6f39b8afd772fda4f8e61823ef8c021bf382 ]
There are two refcount leak bugs in qcom_smsm_probe():
(1) The 'local_node' is escaped out from for_each_child_of_node() as
the break of iteration, we should call of_node_put() for it in error
path or when it is not used anymore.
(2) The 'node' is escaped out from for_each_available_child_of_node()
as the 'goto', we should call of_node_put() for it in goto target.
Fixes: c97c4090ff72 ("soc: qcom: smsm: Add driver for Qualcomm SMSM")
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220721135217.1301039-1-windhl@126.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Richard Fitzgerald <rf@opensource.cirrus.com>
Date: Fri Sep 16 11:35:05 2022 +0100
soundwire: cadence: Don't overwrite msg->buf during write commands
[ Upstream commit ba05b39d265bdd16913f7684600d9d41e2796745 ]
The buf passed in struct sdw_msg must only be written for a READ,
in that case the RDATA part of the response is the data value of the
register.
For a write command there is no RDATA, and buf should be assumed to
be const and unmodifable. The original caller should not expect its data
buffer to be corrupted by an sdw_nwrite().
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220916103505.1562210-1-rf@opensource.cirrus.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Date: Tue Sep 20 01:57:11 2022 +0800
soundwire: intel: fix error handling on dai registration issues
[ Upstream commit c6867cda906aadbce5e71efde9c78a26108b2bad ]
The call to intel_register_dai() may fail because of memory allocation
issues or problems reported by the ASoC core. In all cases, when a
error is thrown the component is not registered, it's invalid to
unregister it.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220919175721.354679-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Zhang Qilong <zhangqilong3@huawei.com>
Date: Sat Sep 24 20:13:09 2022 +0800
spi/omap100k:Fix PM disable depth imbalance in omap1_spi100k_probe
[ Upstream commit 29f65f2171c85a9633daa380df14009a365f42f2 ]
The pm_runtime_enable will increase power disable depth. Thus
a pairing decrement is needed on the error handling path to
keep it balanced according to context.
Fixes:db91841b58f9a ("spi/omap100k: Convert to runtime PM")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20220924121310.78331-4-zhangqilong3@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Zhang Qilong <zhangqilong3@huawei.com>
Date: Sat Sep 24 20:13:08 2022 +0800
spi: dw: Fix PM disable depth imbalance in dw_spi_bt1_probe
[ Upstream commit 618d815fc93477b1675878f3c04ff32657cc18b4 ]
The pm_runtime_enable will increase power disable depth. Thus
a pairing decrement is needed on the error handling path to
keep it balanced according to context.
Fixes:abf00907538e2 ("spi: dw: Add Baikal-T1 SPI Controller glue driver")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20220924121310.78331-3-zhangqilong3@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Marek Szyprowski <m.szyprowski@samsung.com>
Date: Fri Sep 30 13:34:08 2022 +0200
spi: Ensure that sg_table won't be used after being freed
[ Upstream commit 8e9204cddcc3fea9affcfa411715ba4f66e97587 ]
SPI code checks for non-zero sgt->orig_nents to determine if the buffer
has been DMA-mapped. Ensure that sg_table is really zeroed after free to
avoid potential NULL pointer dereference if the given SPI xfer object is
reused again without being DMA-mapped.
Fixes: 0c17ba73c08f ("spi: Fix cache corruption due to DMA/PIO overlap")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20220930113408.19720-1-m.szyprowski@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Neil Armstrong <neil.armstrong@linaro.org>
Date: Thu Sep 8 14:18:03 2022 +0200
spi: meson-spicc: do not rely on busy flag in pow2 clk ops
[ Upstream commit 36acf80fc0c4b5ebe6fa010b524d442ee7f08fd3 ]
Since [1], controller's busy flag isn't set anymore when the
__spi_transfer_message_noqueue() is used instead of the
__spi_pump_transfer_message() logic for spi_sync transfers.
Since the pow2 clock ops were limited to only be available when a
transfer is ongoing (between prepare_transfer_hardware and
unprepare_transfer_hardware callbacks), the only way to track this
down is to check for the controller cur_msg.
[1] ae7d2346dc89 ("spi: Don't use the message queue if possible in spi_sync")
Fixes: 09992025dacd ("spi: meson-spicc: add local pow2 clock ops to preserve rate between messages")
Fixes: ae7d2346dc89 ("spi: Don't use the message queue if possible in spi_sync")
Reported-by: Markus Schneider-Pargmann <msp@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Markus Schneider-Pargmann <msp@baylibre.com>
Link: https://lore.kernel.org/r/20220908121803.919943-1-narmstrong@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Date: Sat Aug 27 13:42:07 2022 +0200
spi: mt7621: Fix an error message in mt7621_spi_probe()
[ Upstream commit 2b2bf6b7faa9010fae10dc7de76627a3fdb525b3 ]
'status' is known to be 0 at this point. The expected error code is
PTR_ERR(clk).
Switch to dev_err_probe() in order to display the expected error code (in a
human readable way).
This also filters -EPROBE_DEFER cases, should it happen.
Fixes: 1ab7f2a43558 ("staging: mt7621-spi: add mt7621 support")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/928f3fb507d53ba0774df27cea0bbba4b055993b.1661599671.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Xu Qiang <xuqiang36@huawei.com>
Date: Thu Aug 25 06:53:24 2022 +0000
spi: qup: add missing clk_disable_unprepare on error in spi_qup_pm_resume_runtime()
[ Upstream commit 494a22765ce479c9f8ad181c5d24cffda9f534bb ]
Add the missing clk_disable_unprepare() before return
from spi_qup_pm_resume_runtime() in the error handling case.
Fixes: dae1a7700b34 (“spi: qup: Handle clocks in pm_runtime suspend and resumeâ€)
Signed-off-by: Xu Qiang <xuqiang36@huawei.com>
Link: https://lore.kernel.org/r/20220825065324.68446-2-xuqiang36@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Xu Qiang <xuqiang36@huawei.com>
Date: Thu Aug 25 06:53:23 2022 +0000
spi: qup: add missing clk_disable_unprepare on error in spi_qup_resume()
[ Upstream commit 70034320fdc597b8f58b4a43bb547f17c4c5557a ]
Add the missing clk_disable_unprepare() before return
from spi_qup_resume() in the error handling case.
Fixes: 64ff247a978f (“spi: Add Qualcomm QUP SPI controller supportâ€)
Signed-off-by: Xu Qiang <xuqiang36@huawei.com>
Link: https://lore.kernel.org/r/20220825065324.68446-1-xuqiang36@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Vincent Whitchurch <vincent.whitchurch@axis.com>
Date: Tue Sep 27 13:21:17 2022 +0200
spi: s3c64xx: Fix large transfers with DMA
[ Upstream commit 1224e29572f655facfcd850cf0f0a4784f36a903 ]
The COUNT_VALUE in the PACKET_CNT register is 16-bit so the maximum
value is 65535. Asking the driver to transfer a larger size currently
leads to the DMA transfer timing out. Implement ->max_transfer_size()
and have the core split the transfer as needed.
Fixes: 230d42d422e7 ("spi: Add s3c64xx SPI Controller driver")
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Link: https://lore.kernel.org/r/20220927112117.77599-5-vincent.whitchurch@axis.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: David Collins <collinsd@codeaurora.org>
Date: Thu Sep 29 17:50:16 2022 -0700
spmi: pmic-arb: correct duplicate APID to PPID mapping logic
[ Upstream commit 1f1693118c2476cb1666ad357edcf3cf48bf9b16 ]
Correct the way that duplicate PPID mappings are handled for PMIC
arbiter v5. The final APID mapped to a given PPID should be the
one which has write owner = APPS EE, if it exists, or if not
that, then the first APID mapped to the PPID, if it exists.
Fixes: 40f318f0ed67 ("spmi: pmic-arb: add support for HW version 5")
Signed-off-by: David Collins <collinsd@codeaurora.org>
Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com>
Link: https://lore.kernel.org/r/1655004286-11493-7-git-send-email-quic_fenglinw@quicinc.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20220930005019.2663064-8-sboyd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Date: Fri Sep 2 16:37:15 2022 +0200
staging: greybus: audio_helper: remove unused and wrong debugfs usage
commit d517cdeb904ddc0cbebcc959d43596426cac40b0 upstream.
In the greybus audio_helper code, the debugfs file for the dapm has the
potential to be removed and memory will be leaked. There is also the
very real potential for this code to remove ALL debugfs entries from the
system, and it seems like this is what will really happen if this code
ever runs. This all is very wrong as the greybus audio driver did not
create this debugfs file, the sound core did and controls the lifespan
of it.
So remove all of the debugfs logic from the audio_helper code as there's
no way it could be correct. If this really is needed, it can come back
with a fixup for the incorrect usage of the debugfs_lookup() call which
is what caused this to be noticed at all.
Cc: Johan Hovold <johan@kernel.org>
Cc: Alex Elder <elder@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20220902143715.320500-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Xiaoke Wang <xkernel.wang@foxmail.com>
Date: Fri Sep 9 19:27:21 2022 +0800
staging: rtl8723bs: fix a potential memory leak in rtw_init_cmd_priv()
[ Upstream commit 708056fba733a73d926772ea4ce9a42d240345da ]
In rtw_init_cmd_priv(), if `pcmdpriv->rsp_allocated_buf` is allocated
in failure, then `pcmdpriv->cmd_allocated_buf` will be not properly
released. Besides, considering there are only two error paths and the
first one can directly return, so we do not need implicitly jump to the
`exit` tag to execute the error handler.
So this patch added `kfree(pcmdpriv->cmd_allocated_buf);` on the error
path to release the resource and simplified the return logic of
rtw_init_cmd_priv(). As there is no proper device to test with, no runtime
testing was performed.
Signed-off-by: Xiaoke Wang <xkernel.wang@foxmail.com>
Link: https://lore.kernel.org/r/tencent_2B7931B79BA38E22205C5A09EFDF11E48805@qq.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Xiaoke Wang <xkernel.wang@foxmail.com>
Date: Fri Sep 9 18:39:35 2022 +0800
staging: rtl8723bs: fix potential memory leak in rtw_init_drv_sw()
[ Upstream commit 5a5aa9cce621e2c0e25a1e5d72d6be1749167cc0 ]
In rtw_init_drv_sw(), there are various init functions are called to
populate the padapter structure and some checks for their return value.
However, except for the first one error path, the other five error paths
do not properly release the previous allocated resources, which leads to
various memory leaks.
This patch fixes them and keeps the success and error separate.
Note that these changes keep the form of `rtw_init_drv_sw()` in
"drivers/staging/r8188eu/os_dep/os_intfs.c". As there is no proper device
to test with, no runtime testing was performed.
Signed-off-by: Xiaoke Wang <xkernel.wang@foxmail.com>
Link: https://lore.kernel.org/r/tencent_C3B899D2FC3F1BC827F3552E0B0734056006@qq.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Nam Cao <namcaov@gmail.com>
Date: Fri Sep 9 16:13:39 2022 +0200
staging: vt6655: fix potential memory leak
[ Upstream commit c8ff91535880d41b49699b3829fb6151942de29e ]
In function device_init_td0_ring, memory is allocated for member
td_info of priv->apTD0Rings[i], with i increasing from 0. In case of
allocation failure, the memory is freed in reversed order, with i
decreasing to 0. However, the case i=0 is left out and thus memory is
leaked.
Modify the memory freeing loop to include the case i=0.
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Signed-off-by: Nam Cao <namcaov@gmail.com>
Link: https://lore.kernel.org/r/20220909141338.19343-1-namcaov@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Nam Cao <namcaov@gmail.com>
Date: Mon Sep 12 19:04:31 2022 +0200
staging: vt6655: fix some erroneous memory clean-up loops
[ Upstream commit 2a2db520e3ca5aafba7c211abfd397666c9b5f9d ]
In some initialization functions of this driver, memory is allocated with
'i' acting as an index variable and increasing from 0. The commit in
"Fixes" introduces some clean-up codes in case of allocation failure,
which free memory in reverse order with 'i' decreasing to 0. However,
there are some problems:
- The case i=0 is left out. Thus memory is leaked.
- In case memory allocation fails right from the start, the memory
freeing loops will start with i=-1 and invalid memory locations will
be accessed.
One of these loops has been fixed in commit c8ff91535880 ("staging:
vt6655: fix potential memory leak"). Fix the remaining erroneous loops.
Link: https://lore.kernel.org/linux-staging/Yx9H1zSpxmNqx6Xc@kadam/
Fixes: 5341ee0adb17 ("staging: vt6655: check for memory allocation failures")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Signed-off-by: Nam Cao <namcaov@gmail.com>
Link: https://lore.kernel.org/r/20220912170429.29852-1-namcaov@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Chuck Lever <chuck.lever@oracle.com>
Date: Thu Sep 1 15:09:53 2022 -0400
SUNRPC: Fix svcxdr_init_decode's end-of-buffer calculation
[ Upstream commit 90bfc37b5ab91c1a6165e3e5cfc49bf04571b762 ]
Ensure that stream-based argument decoding can't go past the actual
end of the receive buffer. xdr_init_decode's calculation of the
value of xdr->end over-estimates the end of the buffer because the
Linux kernel RPC server code does not remove the size of the RPC
header from rqstp->rq_arg before calling the upper layer's
dispatcher.
The server-side still uses the svc_getnl() macros to decode the
RPC call header. These macros reduce the length of the head iov
but do not update the total length of the message in the buffer
(buf->len).
A proper fix for this would be to replace the use of svc_getnl() and
friends in the RPC header decoder, but that would be a large and
invasive change that would be difficult to backport.
Fixes: 5191955d6fc6 ("SUNRPC: Prepare for xdr_stream-style decoding on the server-side")
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Chuck Lever <chuck.lever@oracle.com>
Date: Thu Sep 1 15:09:59 2022 -0400
SUNRPC: Fix svcxdr_init_encode's buflen calculation
[ Upstream commit 1242a87da0d8cd2a428e96ca68e7ea899b0f4624 ]
Commit 2825a7f90753 ("nfsd4: allow encoding across page boundaries")
added an explicit computation of the remaining length in the rq_res
XDR buffer.
The computation appears to suffer from an "off-by-one" bug. Because
buflen is too large by one page, XDR encoding can run off the end of
the send buffer by eventually trying to use the struct page address
in rq_page_end, which always contains NULL.
Fixes: bddfdbcddbe2 ("NFSD: Extract the svcxdr_init_encode() helper")
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Eric Dumazet <edumazet@google.com>
Date: Mon Aug 22 21:15:28 2022 +0000
tcp: annotate data-race around tcp_md5sig_pool_populated
[ Upstream commit aacd467c0a576e5e44d2de4205855dc0fe43f6fb ]
tcp_md5sig_pool_populated can be read while another thread
changes its value.
The race has no consequence because allocations
are protected with tcp_md5sig_mutex.
This patch adds READ_ONCE() and WRITE_ONCE() to document
the race and silence KCSAN.
Reported-by: Abhishek Shah <abhishek.shah@columbia.edu>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Neal Cardwell <ncardwell@google.com>
Date: Wed Sep 28 16:03:31 2022 -0400
tcp: fix tcp_cwnd_validate() to not forget is_cwnd_limited
[ Upstream commit f4ce91ce12a7c6ead19b128ffa8cff6e3ded2a14 ]
This commit fixes a bug in the tracking of max_packets_out and
is_cwnd_limited. This bug can cause the connection to fail to remember
that is_cwnd_limited is true, causing the connection to fail to grow
cwnd when it should, causing throughput to be lower than it should be.
The following event sequence is an example that triggers the bug:
(a) The connection is cwnd_limited, but packets_out is not at its
peak due to TSO deferral deciding not to send another skb yet.
In such cases the connection can advance max_packets_seq and set
tp->is_cwnd_limited to true and max_packets_out to a small
number.
(b) Then later in the round trip the connection is pacing-limited (not
cwnd-limited), and packets_out is larger. In such cases the
connection would raise max_packets_out to a bigger number but
(unexpectedly) flip tp->is_cwnd_limited from true to false.
This commit fixes that bug.
One straightforward fix would be to separately track (a) the next
window after max_packets_out reaches a maximum, and (b) the next
window after tp->is_cwnd_limited is set to true. But this would
require consuming an extra u32 sequence number.
Instead, to save space we track only the most important
information. Specifically, we track the strongest available signal of
the degree to which the cwnd is fully utilized:
(1) If the connection is cwnd-limited then we remember that fact for
the current window.
(2) If the connection not cwnd-limited then we track the maximum
number of outstanding packets in the current window.
In particular, note that the new logic cannot trigger the buggy
(a)/(b) sequence above because with the new logic a condition where
tp->packets_out > tp->max_packets_out can only trigger an update of
tp->is_cwnd_limited if tp->is_cwnd_limited is false.
This first showed up in a testing of a BBRv2 dev branch, but this
buggy behavior highlighted a general issue with the
tcp_cwnd_validate() logic that can cause cwnd to fail to increase at
the proper rate for any TCP congestion control, including Reno or
CUBIC.
Fixes: ca8a22634381 ("tcp: make cwnd-limited checks measurement-based, and gentler")
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Kevin(Yudong) Yang <yyd@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Vincent Knecht <vincent.knecht@mailoo.org>
Date: Thu Aug 11 12:50:14 2022 +0200
thermal/drivers/qcom/tsens-v0_1: Fix MSM8939 fourth sensor hw_id
[ Upstream commit b0c883e900702f408d62cf92b0ef01303ed69be9 ]
Reading temperature from this sensor fails with 'Invalid argument'.
Looking at old vendor dts [1], its hw_id should be 3 instead of 4.
Change this hw_id accordingly.
[1] https://github.com/msm8916-mainline/android_kernel_qcom_msm8916/blob/master/arch/arm/boot/dts/qcom/msm8939-common.dtsi#L511
Fixes: 332bc8ebab2c ("thermal: qcom: tsens-v0_1: Add support for MSM8939")
Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20220811105014.7194-1-vincent.knecht@mailoo.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Xuewen Yan <xuewen.yan@unisoc.com>
Date: Thu Aug 25 19:40:17 2022 +0800
thermal: cpufreq_cooling: Check the policy first in cpufreq_cooling_register()
[ Upstream commit cff895277c8558221ba180aefe26799dcb4eec86 ]
Since the policy needs to be accessed first when obtaining cpu devices,
first check whether the policy is legal before this.
Fixes: 5130802ddbb1 ("thermal: cpu_cooling: Switch to QoS requests for freq limits")
Signed-off-by: Xuewen Yan <xuewen.yan@unisoc.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Date: Thu Oct 13 14:50:28 2022 +0200
thermal: intel_powerclamp: Use first online CPU as control_cpu
commit 4bb7f6c2781e46fc5bd00475a66df2ea30ef330d upstream.
Commit 68b99e94a4a2 ("thermal: intel_powerclamp: Use get_cpu() instead
of smp_processor_id() to avoid crash") fixed an issue related to using
smp_processor_id() in preemptible context by replacing it with a pair
of get_cpu()/put_cpu(), but what is needed there really is any online
CPU and not necessarily the one currently running the code. Arguably,
getting the one that's running the code in there is confusing.
For this reason, simply give the control CPU role to the first online
one which automatically will be CPU0 if it is online, so one check
can be dropped from the code for an added benefit.
Link: https://lore.kernel.org/linux-pm/20221011113646.GA12080@duo.ucw.cz/
Fixes: 68b99e94a4a2 ("thermal: intel_powerclamp: Use get_cpu() instead of smp_processor_id() to avoid crash")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Date: Tue Sep 20 04:06:57 2022 -0700
thermal: intel_powerclamp: Use get_cpu() instead of smp_processor_id() to avoid crash
[ Upstream commit 68b99e94a4a2db6ba9b31fe0485e057b9354a640 ]
When CPU 0 is offline and intel_powerclamp is used to inject
idle, it generates kernel BUG:
BUG: using smp_processor_id() in preemptible [00000000] code: bash/15687
caller is debug_smp_processor_id+0x17/0x20
CPU: 4 PID: 15687 Comm: bash Not tainted 5.19.0-rc7+ #57
Call Trace:
<TASK>
dump_stack_lvl+0x49/0x63
dump_stack+0x10/0x16
check_preemption_disabled+0xdd/0xe0
debug_smp_processor_id+0x17/0x20
powerclamp_set_cur_state+0x7f/0xf9 [intel_powerclamp]
...
...
Here CPU 0 is the control CPU by default and changed to the current CPU,
if CPU 0 offlined. This check has to be performed under cpus_read_lock(),
hence the above warning.
Use get_cpu() instead of smp_processor_id() to avoid this BUG.
Suggested-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
[ rjw: Subject edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Mika Westerberg <mika.westerberg@linux.intel.com>
Date: Tue Aug 30 18:32:48 2022 +0300
thunderbolt: Add back Intel Falcon Ridge end-to-end flow control workaround
[ Upstream commit 54669e2f17cb5a4c41ade89427f074dc22cecb17 ]
As we are now enabling full end-to-end flow control to the Thunderbolt
networking driver, in order for it to work properly on second generation
Thunderbolt hardware (Falcon Ridge), we need to add back the workaround
that was removed with commit 53f13319d131 ("thunderbolt: Get rid of E2E
workaround"). However, this time we only apply it for Falcon Ridge
controllers as a form of an additional quirk. For non-Falcon Ridge this
does nothing.
While there fix a typo 'reqister' -> 'register' in the comment.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Mario Limonciello <mario.limonciello@amd.com>
Date: Mon Sep 26 09:33:50 2022 -0500
thunderbolt: Explicitly enable lane adapter hotplug events at startup
commit 5d2569cb4a65c373896ec0217febdf88739ed295 upstream.
Software that has run before the USB4 CM in Linux runs may have disabled
hotplug events for a given lane adapter.
Other CMs such as that one distributed with Windows 11 will enable hotplug
events. Do the same thing in the Linux CM which fixes hotplug events on
"AMD Pink Sardine".
Cc: stable@vger.kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Nico Pache <npache@redhat.com>
Date: Mon Sep 19 08:49:32 2022 -0600
tracing/osnoise: Fix possible recursive locking in stop_per_cpu_kthreads
[ Upstream commit 99ee9317a1305cd5626736785c8cb38b0e47686c ]
There is a recursive lock on the cpu_hotplug_lock.
In kernel/trace/trace_osnoise.c:<start/stop>_per_cpu_kthreads:
- start_per_cpu_kthreads calls cpus_read_lock() and if
start_kthreads returns a error it will call stop_per_cpu_kthreads.
- stop_per_cpu_kthreads then calls cpus_read_lock() again causing
deadlock.
Fix this by calling cpus_read_unlock() before calling
stop_per_cpu_kthreads. This behavior can also be seen in commit
f46b16520a08 ("trace/hwlat: Implement the per-cpu mode").
This error was noticed during the LTP ftrace-stress-test:
WARNING: possible recursive locking detected
--------------------------------------------
sh/275006 is trying to acquire lock:
ffffffffb02f5400 (cpu_hotplug_lock){++++}-{0:0}, at: stop_per_cpu_kthreads
but task is already holding lock:
ffffffffb02f5400 (cpu_hotplug_lock){++++}-{0:0}, at: start_per_cpu_kthreads
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(cpu_hotplug_lock);
lock(cpu_hotplug_lock);
*** DEADLOCK ***
May be due to missing lock nesting notation
3 locks held by sh/275006:
#0: ffff8881023f0470 (sb_writers#24){.+.+}-{0:0}, at: ksys_write
#1: ffffffffb084f430 (trace_types_lock){+.+.}-{3:3}, at: rb_simple_write
#2: ffffffffb02f5400 (cpu_hotplug_lock){++++}-{0:0}, at: start_per_cpu_kthreads
Link: https://lkml.kernel.org/r/20220919144932.3064014-1-npache@redhat.com
Fixes: c8895e271f79 ("trace/osnoise: Support hotplug operations")
Signed-off-by: Nico Pache <npache@redhat.com>
Acked-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Steven Rostedt (Google) <rostedt@goodmis.org>
Date: Wed Oct 12 06:40:57 2022 -0400
tracing: Add "(fault)" name injection to kernel probes
commit 2e9906f84fc7c99388bb7123ade167250d50f1c0 upstream.
Have the specific functions for kernel probes that read strings to inject
the "(fault)" name directly. trace_probes.c does this too (for uprobes)
but as the code to read strings are going to be used by synthetic events
(and perhaps other utilities), it simplifies the code by making sure those
other uses do not need to implement the "(fault)" name injection as well.
Link: https://lkml.kernel.org/r/20221012104534.644803645@goodmis.org
Cc: stable@vger.kernel.org
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tom Zanussi <zanussi@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Fixes: bd82631d7ccdc ("tracing: Add support for dynamic strings to synthetic events")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Steven Rostedt (Google) <rostedt@goodmis.org>
Date: Thu Sep 29 09:50:29 2022 -0400
tracing: Add ioctl() to force ring buffer waiters to wake up
commit 01b2a52171735c6eea80ee2f355f32bea6c41418 upstream.
If a process is waiting on the ring buffer for data, there currently isn't
a clean way to force it to wake up. Add an ioctl call that will force any
tasks that are waiting on the trace_pipe_raw file to wake up.
Link: https://lkml.kernel.org/r/20220929095029.117f913f@gandalf.local.home
Cc: stable@vger.kernel.org
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes: e30f53aad2202 ("tracing: Do not busy wait in buffer splice")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Waiman Long <longman@redhat.com>
Date: Thu Sep 22 10:56:22 2022 -0400
tracing: Disable interrupt or preemption before acquiring arch_spinlock_t
commit c0a581d7126c0bbc96163276f585fd7b4e4d8d0e upstream.
It was found that some tracing functions in kernel/trace/trace.c acquire
an arch_spinlock_t with preemption and irqs enabled. An example is the
tracing_saved_cmdlines_size_read() function which intermittently causes
a "BUG: using smp_processor_id() in preemptible" warning when the LTP
read_all_proc test is run.
That can be problematic in case preemption happens after acquiring the
lock. Add the necessary preemption or interrupt disabling code in the
appropriate places before acquiring an arch_spinlock_t.
The convention here is to disable preemption for trace_cmdline_lock and
interupt for max_lock.
Link: https://lkml.kernel.org/r/20220922145622.1744826-1-longman@redhat.com
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Will Deacon <will@kernel.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: stable@vger.kernel.org
Fixes: a35873a0993b ("tracing: Add conditional snapshot")
Fixes: 939c7a4f04fc ("tracing: Introduce saved_cmdlines_size file")
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Steven Rostedt (Google) <rostedt@goodmis.org>
Date: Wed Oct 12 06:40:58 2022 -0400
tracing: Fix reading strings from synthetic events
commit 0934ae9977c27133449b6dd8c6213970e7eece38 upstream.
The follow commands caused a crash:
# cd /sys/kernel/tracing
# echo 's:open char file[]' > dynamic_events
# echo 'hist:keys=common_pid:file=filename:onchange($file).trace(open,$file)' > events/syscalls/sys_enter_openat/trigger'
# echo 1 > events/synthetic/open/enable
BOOM!
The problem is that the synthetic event field "char file[]" will read
the value given to it as a string without any memory checks to make sure
the address is valid. The above example will pass in the user space
address and the sythetic event code will happily call strlen() on it
and then strscpy() where either one will cause an oops when accessing
user space addresses.
Use the helper functions from trace_kprobe and trace_eprobe that can
read strings safely (and actually succeed when the address is from user
space and the memory is mapped in).
Now the above can show:
packagekitd-1721 [000] ...2. 104.597170: open: file=/usr/lib/rpm/fileattrs/cmake.attr
in:imjournal-978 [006] ...2. 104.599642: open: file=/var/lib/rsyslog/imjournal.state.tmp
packagekitd-1721 [000] ...2. 104.626308: open: file=/usr/lib/rpm/fileattrs/debuginfo.attr
Link: https://lkml.kernel.org/r/20221012104534.826549315@goodmis.org
Cc: stable@vger.kernel.org
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tom Zanussi <zanussi@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Fixes: bd82631d7ccdc ("tracing: Add support for dynamic strings to synthetic events")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Yipeng Zou <zouyipeng@huawei.com>
Date: Mon Sep 19 20:56:28 2022 +0800
tracing: kprobe: Fix kprobe event gen test module on exit
[ Upstream commit ac48e189527fae87253ef2bf58892e782fb36874 ]
Correct gen_kretprobe_test clr event para on module exit.
This will make it can't to delete.
Link: https://lkml.kernel.org/r/20220919125629.238242-2-zouyipeng@huawei.com
Cc: <linux-riscv@lists.infradead.org>
Cc: <mingo@redhat.com>
Cc: <paul.walmsley@sifive.com>
Cc: <palmer@dabbelt.com>
Cc: <aou@eecs.berkeley.edu>
Cc: <zanussi@kernel.org>
Cc: <liaochang1@huawei.com>
Cc: <chris.zjh@huawei.com>
Fixes: 64836248dda2 ("tracing: Add kprobe event command generation test module")
Signed-off-by: Yipeng Zou <zouyipeng@huawei.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Yipeng Zou <zouyipeng@huawei.com>
Date: Mon Sep 19 20:56:29 2022 +0800
tracing: kprobe: Make gen test module work in arm and riscv
[ Upstream commit d8ef45d66c01425ff748e13ef7dd1da7a91cc93c ]
For now, this selftest module can only work in x86 because of the
kprobe cmd was fixed use of x86 registers.
This patch adapted to register names under arm and riscv, So that
this module can be worked on those platform.
Link: https://lkml.kernel.org/r/20220919125629.238242-3-zouyipeng@huawei.com
Cc: <linux-riscv@lists.infradead.org>
Cc: <mingo@redhat.com>
Cc: <paul.walmsley@sifive.com>
Cc: <palmer@dabbelt.com>
Cc: <aou@eecs.berkeley.edu>
Cc: <zanussi@kernel.org>
Cc: <liaochang1@huawei.com>
Cc: <chris.zjh@huawei.com>
Fixes: 64836248dda2 ("tracing: Add kprobe event command generation test module")
Signed-off-by: Yipeng Zou <zouyipeng@huawei.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Steven Rostedt (Google) <rostedt@goodmis.org>
Date: Wed Oct 12 06:40:56 2022 -0400
tracing: Move duplicate code of trace_kprobe/eprobe.c into header
commit f1d3cbfaafc10464550c6d3a125f4fc802bbaed5 upstream.
The functions:
fetch_store_strlen_user()
fetch_store_strlen()
fetch_store_string_user()
fetch_store_string()
are identical in both trace_kprobe.c and trace_eprobe.c. Move them into
a new header file trace_probe_kernel.h to share it. This code will later
be used by the synthetic events as well.
Marked for stable as a fix for a crash in synthetic events requires it.
Link: https://lkml.kernel.org/r/20221012104534.467668078@goodmis.org
Cc: stable@vger.kernel.org
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tom Zanussi <zanussi@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Fixes: bd82631d7ccdc ("tracing: Add support for dynamic strings to synthetic events")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Steven Rostedt (Google) <rostedt@goodmis.org>
Date: Tue Sep 27 19:15:27 2022 -0400
tracing: Wake up ring buffer waiters on closing of the file
commit f3ddb74ad0790030c9592229fb14d8c451f4e9a8 upstream.
When the file that represents the ring buffer is closed, there may be
waiters waiting on more input from the ring buffer. Call
ring_buffer_wake_waiters() to wake up any waiters when the file is
closed.
Link: https://lkml.kernel.org/r/20220927231825.182416969@goodmis.org
Cc: stable@vger.kernel.org
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes: e30f53aad2202 ("tracing: Do not busy wait in buffer splice")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Steven Rostedt (Google) <rostedt@goodmis.org>
Date: Wed Sep 28 18:22:20 2022 -0400
tracing: Wake up waiters when tracing is disabled
commit 2b0fd9a59b7990c161fa1cb7b79edb22847c87c2 upstream.
When tracing is disabled, there's no reason that waiters should stay
waiting, wake them up, otherwise tasks get stuck when they should be
flushing the buffers.
Cc: stable@vger.kernel.org
Fixes: e30f53aad2202 ("tracing: Do not busy wait in buffer splice")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Sherry Sun <sherry.sun@nxp.com>
Date: Tue Sep 20 19:17:03 2022 +0800
tty: serial: fsl_lpuart: disable dma rx/tx use flags in lpuart_dma_shutdown
[ Upstream commit 316ae95c175a7d770d1bfe4c011192712f57aa4a ]
lpuart_dma_shutdown tears down lpuart dma, but lpuart_flush_buffer can
still occur which in turn tries to access dma apis if lpuart_dma_tx_use
flag is true. At this point since dma is torn down, these dma apis can
abort. Set lpuart_dma_tx_use and the corresponding rx flag
lpuart_dma_rx_use to false in lpuart_dma_shutdown so that dmas are not
accessed after they are relinquished.
Otherwise, when try to kill btattach, kernel may panic. This patch may
fix this issue.
root@imx8ulpevk:~# btattach -B /dev/ttyLP2 -S 115200
^C[ 90.182296] Internal error: synchronous external abort: 96000210 [#1] PREEMPT SMP
[ 90.189806] Modules linked in: moal(O) mlan(O)
[ 90.194258] CPU: 0 PID: 503 Comm: btattach Tainted: G O 5.15.32-06136-g34eecdf2f9e4 #37
[ 90.203554] Hardware name: NXP i.MX8ULP 9X9 EVK (DT)
[ 90.208513] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 90.215470] pc : fsl_edma3_disable_request+0x8/0x60
[ 90.220358] lr : fsl_edma3_terminate_all+0x34/0x20c
[ 90.225237] sp : ffff800013f0bac0
[ 90.228548] x29: ffff800013f0bac0 x28: 0000000000000001 x27: ffff000008404800
[ 90.235681] x26: ffff000008404960 x25: ffff000008404a08 x24: ffff000008404a00
[ 90.242813] x23: ffff000008404a60 x22: 0000000000000002 x21: 0000000000000000
[ 90.249946] x20: ffff800013f0baf8 x19: ffff00000559c800 x18: 0000000000000000
[ 90.257078] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
[ 90.264211] x14: 0000000000000003 x13: 0000000000000000 x12: 0000000000000040
[ 90.271344] x11: ffff00000600c248 x10: ffff800013f0bb10 x9 : ffff000057bcb090
[ 90.278477] x8 : fffffc0000241a08 x7 : ffff00000534ee00 x6 : ffff000008404804
[ 90.285609] x5 : 0000000000000000 x4 : 0000000000000000 x3 : ffff0000055b3480
[ 90.292742] x2 : ffff8000135c0000 x1 : ffff00000534ee00 x0 : ffff00000559c800
[ 90.299876] Call trace:
[ 90.302321] fsl_edma3_disable_request+0x8/0x60
[ 90.306851] lpuart_flush_buffer+0x40/0x160
[ 90.311037] uart_flush_buffer+0x88/0x120
[ 90.315050] tty_driver_flush_buffer+0x20/0x30
[ 90.319496] hci_uart_flush+0x44/0x90
[ 90.323162] +0x34/0x12c
[ 90.327253] tty_ldisc_close+0x38/0x70
[ 90.331005] tty_ldisc_release+0xa8/0x190
[ 90.335018] tty_release_struct+0x24/0x8c
[ 90.339022] tty_release+0x3ec/0x4c0
[ 90.342593] __fput+0x70/0x234
[ 90.345652] ____fput+0x14/0x20
[ 90.348790] task_work_run+0x84/0x17c
[ 90.352455] do_exit+0x310/0x96c
[ 90.355688] do_group_exit+0x3c/0xa0
[ 90.359259] __arm64_sys_exit_group+0x1c/0x20
[ 90.363609] invoke_syscall+0x48/0x114
[ 90.367362] el0_svc_common.constprop.0+0xd4/0xfc
[ 90.372068] do_el0_svc+0x2c/0x94
[ 90.375379] el0_svc+0x28/0x80
[ 90.378438] el0t_64_sync_handler+0xa8/0x130
[ 90.382711] el0t_64_sync+0x1a0/0x1a4
[ 90.386376] Code: 17ffffda d503201f d503233f f9409802 (b9400041)
[ 90.392467] ---[ end trace 2f60524b4a43f1f6 ]---
[ 90.397073] note: btattach[503] exited with preempt_count 1
[ 90.402636] Fixing recursive fault but reboot is needed!
Fixes: 6250cc30c4c4 ("tty: serial: fsl_lpuart: Use scatter/gather DMA for Tx")
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Thara Gopinath <tgopinath@microsoft.com>
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Link: https://lore.kernel.org/r/20220920111703.1532-1-sherry.sun@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Date: Fri Jul 29 17:17:45 2022 +0530
tty: xilinx_uartps: Fix the ignore_status
[ Upstream commit b8a6c3b3d4654fba19881cc77da61eac29f57cae ]
Currently the ignore_status is not considered in the isr.
Add a check to add the ignore_status.
Fixes: 61ec9016988f ("tty/serial: add support for Xilinx PS UART")
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Link: https://lore.kernel.org/r/20220729114748.18332-5-shubhrajyoti.datta@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Vivek Kasireddy <vivek.kasireddy@intel.com>
Date: Wed Aug 24 23:35:22 2022 -0700
udmabuf: Set ubuf->sg = NULL if the creation of sg table fails
[ Upstream commit d9c04a1b7a15b5e74b2977461d9511e497f05d8f ]
When userspace tries to map the dmabuf and if for some reason
(e.g. OOM) the creation of the sg table fails, ubuf->sg needs to be
set to NULL. Otherwise, when the userspace subsequently closes the
dmabuf fd, we'd try to erroneously free the invalid sg table from
release_udmabuf resulting in the following crash reported by syzbot:
general protection fault, probably for non-canonical address
0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
CPU: 0 PID: 3609 Comm: syz-executor487 Not tainted
5.19.0-syzkaller-13930-g7ebfc85e2cd7 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 07/22/2022
RIP: 0010:dma_unmap_sgtable include/linux/dma-mapping.h:378 [inline]
RIP: 0010:put_sg_table drivers/dma-buf/udmabuf.c:89 [inline]
RIP: 0010:release_udmabuf+0xcb/0x4f0 drivers/dma-buf/udmabuf.c:114
Code: 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 2b 04 00 00 48 8d 7d 0c 4c
8b 63 30 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 14
02 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85 e2
RSP: 0018:ffffc900037efd30 EFLAGS: 00010246
RAX: dffffc0000000000 RBX: ffffffff8cb67800 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff84ad27e0 RDI: 0000000000000000
RBP: fffffffffffffff4 R08: 0000000000000005 R09: 0000000000000000
R10: 0000000000000000 R11: 000000000008c07c R12: ffff88801fa05000
R13: ffff888073db07e8 R14: ffff888025c25440 R15: 0000000000000000
FS: 0000555555fc4300(0000) GS:ffff8880b9a00000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fc1c0ce06e4 CR3: 00000000715e6000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
dma_buf_release+0x157/0x2d0 drivers/dma-buf/dma-buf.c:78
__dentry_kill+0x42b/0x640 fs/dcache.c:612
dentry_kill fs/dcache.c:733 [inline]
dput+0x806/0xdb0 fs/dcache.c:913
__fput+0x39c/0x9d0 fs/file_table.c:333
task_work_run+0xdd/0x1a0 kernel/task_work.c:177
ptrace_notify+0x114/0x140 kernel/signal.c:2353
ptrace_report_syscall include/linux/ptrace.h:420 [inline]
ptrace_report_syscall_exit include/linux/ptrace.h:482 [inline]
syscall_exit_work kernel/entry/common.c:249 [inline]
syscall_exit_to_user_mode_prepare+0x129/0x280 kernel/entry/common.c:276
__syscall_exit_to_user_mode_work kernel/entry/common.c:281 [inline]
syscall_exit_to_user_mode+0x9/0x50 kernel/entry/common.c:294
do_syscall_64+0x42/0xb0 arch/x86/entry/common.c:86
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7fc1c0c35b6b
Code: 0f 05 48 3d 00 f0 ff ff 77 45 c3 0f 1f 40 00 48 83 ec 18 89 7c 24
0c e8 63 fc ff ff 8b 7c 24 0c 41 89 c0 b8 03 00 00 00 0f 05 <48> 3d 00
f0 ff ff 77 35 44 89 c7 89 44 24 0c e8 a1 fc ff ff 8b 44
RSP: 002b:00007ffd78a06090 EFLAGS: 00000293 ORIG_RAX: 0000000000000003
RAX: 0000000000000000 RBX: 0000000000000007 RCX: 00007fc1c0c35b6b
RDX: 0000000020000280 RSI: 0000000040086200 RDI: 0000000000000006
RBP: 0000000000000007 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000293 R12: 000000000000000c
R13: 0000000000000003 R14: 00007fc1c0cfe4a0 R15: 00007ffd78a06140
</TASK>
Modules linked in:
---[ end trace 0000000000000000 ]---
RIP: 0010:dma_unmap_sgtable include/linux/dma-mapping.h:378 [inline]
RIP: 0010:put_sg_table drivers/dma-buf/udmabuf.c:89 [inline]
RIP: 0010:release_udmabuf+0xcb/0x4f0 drivers/dma-buf/udmabuf.c:114
Reported-by: syzbot+c80e9ef5d8bb45894db0@syzkaller.appspotmail.com
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220825063522.801264-1-vivek.kasireddy@intel.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Huacai Chen <chenhuacai@kernel.org>
Date: Tue Jul 12 15:52:55 2022 +0800
UM: cpuinfo: Fix a warning for CONFIG_CPUMASK_OFFSTACK
commit 16c546e148fa6d14a019431436a6f7b4087dbccd upstream.
When CONFIG_CPUMASK_OFFSTACK and CONFIG_DEBUG_PER_CPU_MAPS is selected,
cpu_max_bits_warn() generates a runtime warning similar as below while
we show /proc/cpuinfo. Fix this by using nr_cpu_ids (the runtime limit)
instead of NR_CPUS to iterate CPUs.
[ 3.052463] ------------[ cut here ]------------
[ 3.059679] WARNING: CPU: 3 PID: 1 at include/linux/cpumask.h:108 show_cpuinfo+0x5e8/0x5f0
[ 3.070072] Modules linked in: efivarfs autofs4
[ 3.076257] CPU: 0 PID: 1 Comm: systemd Not tainted 5.19-rc5+ #1052
[ 3.099465] Stack : 9000000100157b08 9000000000f18530 9000000000cf846c 9000000100154000
[ 3.109127] 9000000100157a50 0000000000000000 9000000100157a58 9000000000ef7430
[ 3.118774] 90000001001578e8 0000000000000040 0000000000000020 ffffffffffffffff
[ 3.128412] 0000000000aaaaaa 1ab25f00eec96a37 900000010021de80 900000000101c890
[ 3.138056] 0000000000000000 0000000000000000 0000000000000000 0000000000aaaaaa
[ 3.147711] ffff8000339dc220 0000000000000001 0000000006ab4000 0000000000000000
[ 3.157364] 900000000101c998 0000000000000004 9000000000ef7430 0000000000000000
[ 3.167012] 0000000000000009 000000000000006c 0000000000000000 0000000000000000
[ 3.176641] 9000000000d3de08 9000000001639390 90000000002086d8 00007ffff0080286
[ 3.186260] 00000000000000b0 0000000000000004 0000000000000000 0000000000071c1c
[ 3.195868] ...
[ 3.199917] Call Trace:
[ 3.203941] [<90000000002086d8>] show_stack+0x38/0x14c
[ 3.210666] [<9000000000cf846c>] dump_stack_lvl+0x60/0x88
[ 3.217625] [<900000000023d268>] __warn+0xd0/0x100
[ 3.223958] [<9000000000cf3c90>] warn_slowpath_fmt+0x7c/0xcc
[ 3.231150] [<9000000000210220>] show_cpuinfo+0x5e8/0x5f0
[ 3.238080] [<90000000004f578c>] seq_read_iter+0x354/0x4b4
[ 3.245098] [<90000000004c2e90>] new_sync_read+0x17c/0x1c4
[ 3.252114] [<90000000004c5174>] vfs_read+0x138/0x1d0
[ 3.258694] [<90000000004c55f8>] ksys_read+0x70/0x100
[ 3.265265] [<9000000000cfde9c>] do_syscall+0x7c/0x94
[ 3.271820] [<9000000000202fe4>] handle_syscall+0xc4/0x160
[ 3.281824] ---[ end trace 8b484262b4b8c24c ]---
Cc: stable@vger.kernel.org
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jean-Francois Le Fillatre <jflf_kernel@gmx.com>
Date: Tue Sep 27 09:34:07 2022 +0200
usb: add quirks for Lenovo OneLink+ Dock
commit 37d49519b41405b08748392c6a7f193d9f77ecd2 upstream.
The Lenovo OneLink+ Dock contains two VL812 USB3.0 controllers:
17ef:1018 upstream
17ef:1019 downstream
These hubs suffer from two separate problems:
1) After the host system was suspended and woken up, the hubs appear to
be in a random state. Some downstream ports (both internal to the
built-in audio and network controllers, and external to USB sockets)
may no longer be functional. The exact list of disabled ports (if
any) changes from wakeup to wakeup. Ports remain in that state until
the dock is power-cycled, or until the laptop is rebooted.
Wakeup sources connected to the hubs (keyboard, WoL on the integrated
gigabit controller) will wake the system up from suspend, but they
may no longer work after wakeup (and in that case will no longer work
as wakeup source in a subsequent suspend-wakeup cycle).
This issue appears in the logs with messages such as:
usb 1-6.1-port4: cannot disable (err = -71)
usb 1-6-port2: cannot disable (err = -71)
usb 1-6.1: clear tt 1 (80c0) error -71
usb 1-6-port4: cannot disable (err = -71)
usb 1-6.4: PM: dpm_run_callback(): usb_dev_resume+0x0/0x10 [usbcore] returns -71
usb 1-6.4: PM: failed to resume async: error -71
usb 1-7: reset full-speed USB device number 5 using xhci_hcd
usb 1-6.1-port1: cannot reset (err = -71)
usb 1-6.1-port1: cannot reset (err = -71)
usb 1-6.1-port1: cannot reset (err = -71)
usb 1-6.1-port1: cannot reset (err = -71)
usb 1-6.1-port1: cannot reset (err = -71)
usb 1-6.1-port1: Cannot enable. Maybe the USB cable is bad?
usb 1-6.1-port1: cannot disable (err = -71)
usb 1-6.1-port1: cannot reset (err = -71)
usb 1-6.1-port1: cannot reset (err = -71)
usb 1-6.1-port1: cannot reset (err = -71)
usb 1-6.1-port1: cannot reset (err = -71)
usb 1-6.1-port1: cannot reset (err = -71)
usb 1-6.1-port1: Cannot enable. Maybe the USB cable is bad?
usb 1-6.1-port1: cannot disable (err = -71)
2) Some USB devices cannot be enumerated properly. So far I have only
seen the issue with USB 3.0 devices. The same devices work without
problem directly connected to the host system, to other systems or to
other hubs (even when those hubs are connected to the OneLink+ dock).
One very reliable reproducer is this USB 3.0 HDD enclosure:
152d:9561 JMicron Technology Corp. / JMicron USA Technology Corp. Mobius
I have seen it happen sporadically with other USB 3.0 enclosures,
with controllers from different manufacturers, all self-powered.
Typical messages in the logs:
xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
usb 2-1.4: device not accepting address 6, error -62
xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
usb 2-1.4: device not accepting address 7, error -62
usb 2-1-port4: attempt power cycle
xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
usb 2-1.4: device not accepting address 8, error -62
xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
usb 2-1.4: device not accepting address 9, error -62
usb 2-1-port4: unable to enumerate USB device
Through trial and error, I found that the USB_QUIRK_RESET_RESUME solved
the second issue. Further testing then uncovered the first issue. Test
results are summarized in this table:
=======================================================================================
Settings USB2 hotplug USB3 hotplug State after waking up
---------------------------------------------------------------------------------------
power/control=auto works fails broken
usbcore.autosuspend=-1 works works broken
OR power/control=on
power/control=auto works (1) works (1) works
and USB_QUIRK_RESET_RESUME
power/control=on works works works
and USB_QUIRK_RESET_RESUME
HUB_QUIRK_DISABLE_AUTOSUSPEND works works works
and USB_QUIRK_RESET_RESUME
=======================================================================================
In those results, the power/control settings are applied to both hubs,
both on the USB2 and USB3 side, before each test.
From those results, USB_QUIRK_RESET_RESUME is required to reset the hubs
properly after a suspend-wakeup cycle, and the hubs must not autosuspend
to work around the USB3 issue.
A secondary effect of USB_QUIRK_RESET_RESUME is to prevent the hubs'
upstream links from suspending (the downstream ports can still suspend).
This secondary effect is used in results (1). It is enough to solve the
USB3 problem.
Setting USB_QUIRK_RESET_RESUME on those hubs is the smallest patch that
solves both issues.
Prior to creating this patch, I have used the USB_QUIRK_RESET_RESUME via
the kernel command line for over a year without noticing any side
effect.
Thanks to Oliver Neukum @Suse for explanations of the operations of
USB_QUIRK_RESET_RESUME, and requesting more testing.
Signed-off-by: Jean-Francois Le Fillatre <jflf_kernel@gmx.com>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20220927073407.5672-1-jflf_kernel@gmx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Date: Wed Jul 27 18:38:01 2022 -0700
usb: common: debug: Check non-standard control requests
[ Upstream commit b6155eaf6b05e558218b44b88a6cad03f15a586c ]
Previously usb_decode_ctrl() only decodes standard control requests, but
it was used for non-standard requests also. If it's non-standard or
unknown standard bRequest, print the Setup data values.
Fixes: af32423a2d86 ("usb: dwc3: trace: decode ctrl request")
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/8d6a30f2f2f953eff833a5bc5aac640a4cc2fc9f.1658971571.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Piyush Mehta <piyush.mehta@amd.com>
Date: Tue Sep 20 10:52:35 2022 +0530
usb: dwc3: core: Enable GUCTL1 bit 10 for fixing termination error after resume bug
[ Upstream commit 63d7f9810a38102cdb8cad214fac98682081e1a7 ]
When configured in HOST mode, after issuing U3/L2 exit controller fails
to send proper CRC checksum in CRC5 field. Because of this behavior
Transaction Error is generated, resulting in reset and re-enumeration of
usb device attached. Enabling chicken bit 10 of GUCTL1 will correct this
problem.
When this bit is set to '1', the UTMI/ULPI opmode will be changed to
"normal" along with HS terminations, term, and xcvr signals after EOR.
This option is to support certain legacy UTMI/ULPI PHYs.
Added "snps,resume-hs-terminations" quirk to resolved the above issue.
Signed-off-by: Piyush Mehta <piyush.mehta@amd.com>
Link: https://lore.kernel.org/r/20220920052235.194272-3-piyush.mehta@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Albert Briscoe <albertsbriscoe@gmail.com>
Date: Sun Sep 11 15:37:55 2022 -0700
usb: gadget: function: fix dangling pnp_string in f_printer.c
[ Upstream commit 24b7ba2f88e04800b54d462f376512e8c41b8a3c ]
When opts->pnp_string is changed with configfs, new memory is allocated for
the string. It does not, however, update dev->pnp_string, even though the
memory is freed. When rquesting the string, the host then gets old or
corrupted data rather than the new string. The ieee 1284 id string should
be allowed to change while the device is connected.
The bug was introduced in commit fdc01cc286be ("usb: gadget: printer:
Remove pnp_string static buffer"), which changed opts->pnp_string from a
char[] to a char*.
This patch changes dev->pnp_string from a char* to a char** pointing to
opts->pnp_string.
Fixes: fdc01cc286be ("usb: gadget: printer: Remove pnp_string static buffer")
Signed-off-by: Albert Briscoe <albertsbriscoe@gmail.com>
Link: https://lore.kernel.org/r/20220911223753.20417-1-albertsbriscoe@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Justin Chen <justinpopo6@gmail.com>
Date: Wed Aug 10 15:27:34 2022 -0700
usb: host: xhci-plat: suspend and resume clocks
[ Upstream commit 8bd954c56197caf5e3a804d989094bc3fe6329aa ]
Introduce XHCI_SUSPEND_RESUME_CLKS quirk as a means to suspend and resume
clocks if the hardware is capable of doing so. We assume that clocks will
be needed if the device may wake.
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Justin Chen <justinpopo6@gmail.com>
Link: https://lore.kernel.org/r/1660170455-15781-2-git-send-email-justinpopo6@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Justin Chen <justinpopo6@gmail.com>
Date: Wed Aug 10 15:27:35 2022 -0700
usb: host: xhci-plat: suspend/resume clks for brcm
[ Upstream commit c69400b09e471a3f1167adead55a808f0da6534a ]
The xhci_plat_brcm xhci block can enter suspend with clock disabled to save
power and re-enable them on resume. Make use of the XHCI_SUSPEND_RESUME_CLKS
quirk to do so.
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Justin Chen <justinpopo6@gmail.com>
Link: https://lore.kernel.org/r/1660170455-15781-3-git-send-email-justinpopo6@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jianglei Nie <niejianglei2021@163.com>
Date: Wed Sep 21 15:34:45 2022 +0300
usb: host: xhci: Fix potential memory leak in xhci_alloc_stream_info()
[ Upstream commit 7e271f42a5cc3768cd2622b929ba66859ae21f97 ]
xhci_alloc_stream_info() allocates stream context array for stream_info
->stream_ctx_array with xhci_alloc_stream_ctx(). When some error occurs,
stream_info->stream_ctx_array is not released, which will lead to a
memory leak.
We can fix it by releasing the stream_info->stream_ctx_array with
xhci_free_stream_ctx() on the error path to avoid the potential memory
leak.
Signed-off-by: Jianglei Nie <niejianglei2021@163.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20220921123450.671459-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dongliang Mu <mudongliangabcd@gmail.com>
Date: Thu Sep 22 21:48:44 2022 +0800
usb: idmouse: fix an uninit-value in idmouse_open
[ Upstream commit bce2b0539933e485d22d6f6f076c0fcd6f185c4c ]
In idmouse_create_image, if any ftip_command fails, it will
go to the reset label. However, this leads to the data in
bulk_in_buffer[HEADER..IMGSIZE] uninitialized. And the check
for valid image incurs an uninitialized dereference.
Fix this by moving the check before reset label since this
check only be valid if the data after bulk_in_buffer[HEADER]
has concrete data.
Note that this is found by KMSAN, so only kernel compilation
is tested.
Reported-by: syzbot+79832d33eb89fb3cd092@syzkaller.appspotmail.com
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Link: https://lore.kernel.org/r/20220922134847.1101921-1-dzm91@hust.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Chunfeng Yun <chunfeng.yun@mediatek.com>
Date: Thu Sep 29 14:44:59 2022 +0800
usb: mtu3: fix failed runtime suspend in host only mode
[ Upstream commit 1c703e29da5efac6180e4c189029fa34b7e48e97 ]
When the dr_mode is "host", after the host enter runtime suspend,
the mtu3 can't do it, because the mtu3's device wakeup function is
not enabled, instead it's enabled in gadget init function, to fix
the issue, init wakeup early in mtu3's probe()
Fixes: 6b587394c65c ("usb: mtu3: support suspend/resume for dual-role mode")
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reported-by: Tianping Fang <tianping.fang@mediatek.com>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/20220929064459.32522-1-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Robin Guo <guoweibin@inspur.com>
Date: Tue Sep 6 10:21:19 2022 +0800
usb: musb: Fix musb_gadget.c rxstate overflow bug
[ Upstream commit eea4c860c3b366369eff0489d94ee4f0571d467d ]
The usb function device call musb_gadget_queue() adds the passed
request to musb_ep::req_list,If the (request->length > musb_ep->packet_sz)
and (is_buffer_mapped(req) return false),the rxstate() will copy all data
in fifo to request->buf which may cause request->buf out of bounds.
Fix it by add the length check :
fifocnt = min_t(unsigned, request->length - request->actual, fifocnt);
Signed-off-by: Robin Guo <guoweibin@inspur.com>
Link: https://lore.kernel.org/r/20220906102119.1b071d07a8391ff115e6d1ef@inspur.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ondrej Mosnacek <omosnace@redhat.com>
Date: Fri Jul 8 11:34:51 2022 +0200
userfaultfd: open userfaultfds with O_RDONLY
[ Upstream commit abec3d015fdfb7c63105c7e1c956188bf381aa55 ]
Since userfaultfd doesn't implement a write operation, it is more
appropriate to open it read-only.
When userfaultfds are opened read-write like it is now, and such fd is
passed from one process to another, SELinux will check both read and
write permissions for the target process, even though it can't actually
do any write operation on the fd later.
Inspired by the following bug report, which has hit the SELinux scenario
described above:
https://bugzilla.redhat.com/show_bug.cgi?id=1974559
Reported-by: Robert O'Callahan <roc@ocallahan.org>
Fixes: 86039bd3b4e6 ("userfaultfd: add new syscall to provide memory externalization")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Acked-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Junichi Uekawa <uekawa@chromium.org>
Date: Wed Sep 28 15:45:38 2022 +0900
vhost/vsock: Use kvmalloc/kvfree for larger packets.
[ Upstream commit 0e3f72931fc47bb81686020cc643cde5d9cd0bb8 ]
When copying a large file over sftp over vsock, data size is usually 32kB,
and kmalloc seems to fail to try to allocate 32 32kB regions.
vhost-5837: page allocation failure: order:4, mode:0x24040c0
Call Trace:
[<ffffffffb6a0df64>] dump_stack+0x97/0xdb
[<ffffffffb68d6aed>] warn_alloc_failed+0x10f/0x138
[<ffffffffb68d868a>] ? __alloc_pages_direct_compact+0x38/0xc8
[<ffffffffb664619f>] __alloc_pages_nodemask+0x84c/0x90d
[<ffffffffb6646e56>] alloc_kmem_pages+0x17/0x19
[<ffffffffb6653a26>] kmalloc_order_trace+0x2b/0xdb
[<ffffffffb66682f3>] __kmalloc+0x177/0x1f7
[<ffffffffb66e0d94>] ? copy_from_iter+0x8d/0x31d
[<ffffffffc0689ab7>] vhost_vsock_handle_tx_kick+0x1fa/0x301 [vhost_vsock]
[<ffffffffc06828d9>] vhost_worker+0xf7/0x157 [vhost]
[<ffffffffb683ddce>] kthread+0xfd/0x105
[<ffffffffc06827e2>] ? vhost_dev_set_owner+0x22e/0x22e [vhost]
[<ffffffffb683dcd1>] ? flush_kthread_worker+0xf3/0xf3
[<ffffffffb6eb332e>] ret_from_fork+0x4e/0x80
[<ffffffffb683dcd1>] ? flush_kthread_worker+0xf3/0xf3
Work around by doing kvmalloc instead.
Fixes: 433fc58e6bf2 ("VSOCK: Introduce vhost_vsock.ko")
Signed-off-by: Junichi Uekawa <uekawa@chromium.org>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/r/20220928064538.667678-1-uekawa@chromium.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Wen Gong <quic_wgong@quicinc.com>
Date: Mon Aug 1 10:19:30 2022 -0400
wifi: ath10k: add peer map clean up for peer delete in ath10k_sta_state()
[ Upstream commit f020d9570a04df0762a2ac5c50cf1d8c511c9164 ]
When peer delete failed in a disconnect operation, use-after-free
detected by KFENCE in below log. It is because for each vdev_id and
address, it has only one struct ath10k_peer, it is allocated in
ath10k_peer_map_event(). When connected to an AP, it has more than
one HTT_T2H_MSG_TYPE_PEER_MAP reported from firmware, then the
array peer_map of struct ath10k will be set muti-elements to the
same ath10k_peer in ath10k_peer_map_event(). When peer delete failed
in ath10k_sta_state(), the ath10k_peer will be free for the 1st peer
id in array peer_map of struct ath10k, and then use-after-free happened
for the 2nd peer id because they map to the same ath10k_peer.
And clean up all peers in array peer_map for the ath10k_peer, then
user-after-free disappeared
peer map event log:
[ 306.911021] wlan0: authenticate with b0:2a:43:e6:75:0e
[ 306.957187] ath10k_pci 0000:01:00.0: mac vdev 0 peer create b0:2a:43:e6:75:0e (new sta) sta 1 / 32 peer 1 / 33
[ 306.957395] ath10k_pci 0000:01:00.0: htt peer map vdev 0 peer b0:2a:43:e6:75:0e id 246
[ 306.957404] ath10k_pci 0000:01:00.0: htt peer map vdev 0 peer b0:2a:43:e6:75:0e id 198
[ 306.986924] ath10k_pci 0000:01:00.0: htt peer map vdev 0 peer b0:2a:43:e6:75:0e id 166
peer unmap event log:
[ 435.715691] wlan0: deauthenticating from b0:2a:43:e6:75:0e by local choice (Reason: 3=DEAUTH_LEAVING)
[ 435.716802] ath10k_pci 0000:01:00.0: mac vdev 0 peer delete b0:2a:43:e6:75:0e sta ffff990e0e9c2b50 (sta gone)
[ 435.717177] ath10k_pci 0000:01:00.0: htt peer unmap vdev 0 peer b0:2a:43:e6:75:0e id 246
[ 435.717186] ath10k_pci 0000:01:00.0: htt peer unmap vdev 0 peer b0:2a:43:e6:75:0e id 198
[ 435.717193] ath10k_pci 0000:01:00.0: htt peer unmap vdev 0 peer b0:2a:43:e6:75:0e id 166
use-after-free log:
[21705.888627] wlan0: deauthenticating from d0:76:8f:82:be:75 by local choice (Reason: 3=DEAUTH_LEAVING)
[21713.799910] ath10k_pci 0000:01:00.0: failed to delete peer d0:76:8f:82:be:75 for vdev 0: -110
[21713.799925] ath10k_pci 0000:01:00.0: found sta peer d0:76:8f:82:be:75 (ptr 0000000000000000 id 102) entry on vdev 0 after it was supposedly removed
[21713.799968] ==================================================================
[21713.799991] BUG: KFENCE: use-after-free read in ath10k_sta_state+0x265/0xb8a [ath10k_core]
[21713.799991]
[21713.799997] Use-after-free read at 0x00000000abe1c75e (in kfence-#69):
[21713.800010] ath10k_sta_state+0x265/0xb8a [ath10k_core]
[21713.800041] drv_sta_state+0x115/0x677 [mac80211]
[21713.800059] __sta_info_destroy_part2+0xb1/0x133 [mac80211]
[21713.800076] __sta_info_flush+0x11d/0x162 [mac80211]
[21713.800093] ieee80211_set_disassoc+0x12d/0x2f4 [mac80211]
[21713.800110] ieee80211_mgd_deauth+0x26c/0x29b [mac80211]
[21713.800137] cfg80211_mlme_deauth+0x13f/0x1bb [cfg80211]
[21713.800153] nl80211_deauthenticate+0xf8/0x121 [cfg80211]
[21713.800161] genl_rcv_msg+0x38e/0x3be
[21713.800166] netlink_rcv_skb+0x89/0xf7
[21713.800171] genl_rcv+0x28/0x36
[21713.800176] netlink_unicast+0x179/0x24b
[21713.800181] netlink_sendmsg+0x3a0/0x40e
[21713.800187] sock_sendmsg+0x72/0x76
[21713.800192] ____sys_sendmsg+0x16d/0x1e3
[21713.800196] ___sys_sendmsg+0x95/0xd1
[21713.800200] __sys_sendmsg+0x85/0xbf
[21713.800205] do_syscall_64+0x43/0x55
[21713.800210] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[21713.800213]
[21713.800219] kfence-#69: 0x000000009149b0d5-0x000000004c0697fb, size=1064, cache=kmalloc-2k
[21713.800219]
[21713.800224] allocated by task 13 on cpu 0 at 21705.501373s:
[21713.800241] ath10k_peer_map_event+0x7e/0x154 [ath10k_core]
[21713.800254] ath10k_htt_t2h_msg_handler+0x586/0x1039 [ath10k_core]
[21713.800265] ath10k_htt_htc_t2h_msg_handler+0x12/0x28 [ath10k_core]
[21713.800277] ath10k_htc_rx_completion_handler+0x14c/0x1b5 [ath10k_core]
[21713.800283] ath10k_pci_process_rx_cb+0x195/0x1df [ath10k_pci]
[21713.800294] ath10k_ce_per_engine_service+0x55/0x74 [ath10k_core]
[21713.800305] ath10k_ce_per_engine_service_any+0x76/0x84 [ath10k_core]
[21713.800310] ath10k_pci_napi_poll+0x49/0x144 [ath10k_pci]
[21713.800316] net_rx_action+0xdc/0x361
[21713.800320] __do_softirq+0x163/0x29a
[21713.800325] asm_call_irq_on_stack+0x12/0x20
[21713.800331] do_softirq_own_stack+0x3c/0x48
[21713.800337] __irq_exit_rcu+0x9b/0x9d
[21713.800342] common_interrupt+0xc9/0x14d
[21713.800346] asm_common_interrupt+0x1e/0x40
[21713.800351] ksoftirqd_should_run+0x5/0x16
[21713.800357] smpboot_thread_fn+0x148/0x211
[21713.800362] kthread+0x150/0x15f
[21713.800367] ret_from_fork+0x22/0x30
[21713.800370]
[21713.800374] freed by task 708 on cpu 1 at 21713.799953s:
[21713.800498] ath10k_sta_state+0x2c6/0xb8a [ath10k_core]
[21713.800515] drv_sta_state+0x115/0x677 [mac80211]
[21713.800532] __sta_info_destroy_part2+0xb1/0x133 [mac80211]
[21713.800548] __sta_info_flush+0x11d/0x162 [mac80211]
[21713.800565] ieee80211_set_disassoc+0x12d/0x2f4 [mac80211]
[21713.800581] ieee80211_mgd_deauth+0x26c/0x29b [mac80211]
[21713.800598] cfg80211_mlme_deauth+0x13f/0x1bb [cfg80211]
[21713.800614] nl80211_deauthenticate+0xf8/0x121 [cfg80211]
[21713.800619] genl_rcv_msg+0x38e/0x3be
[21713.800623] netlink_rcv_skb+0x89/0xf7
[21713.800628] genl_rcv+0x28/0x36
[21713.800632] netlink_unicast+0x179/0x24b
[21713.800637] netlink_sendmsg+0x3a0/0x40e
[21713.800642] sock_sendmsg+0x72/0x76
[21713.800646] ____sys_sendmsg+0x16d/0x1e3
[21713.800651] ___sys_sendmsg+0x95/0xd1
[21713.800655] __sys_sendmsg+0x85/0xbf
[21713.800659] do_syscall_64+0x43/0x55
[21713.800663] entry_SYSCALL_64_after_hwframe+0x44/0xa9
Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00288-QCARMSWPZ-1
Fixes: d0eeafad1189 ("ath10k: Clean up peer when sta goes away.")
Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220801141930.16794-1-quic_wgong@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jesus Fernandez Manzano <jesus.manzano@galgus.net>
Date: Thu Sep 22 10:35:14 2022 +0300
wifi: ath11k: fix number of VHT beamformee spatial streams
[ Upstream commit 55b5ee3357d7bb98ee578cf9b84a652e7a1bc199 ]
The number of spatial streams used when acting as a beamformee in VHT
mode are reported by the firmware as 7 (8 sts - 1) both in IPQ6018 and
IPQ8074 which respectively have 2 and 4 sts each. So the firmware should
report 1 (2 - 1) and 3 (4 - 1).
Fix this by checking that the number of VHT beamformee sts reported by
the firmware is not greater than the number of receiving antennas - 1.
The fix is based on the same approach used in this same function for
sanitizing the number of sounding dimensions reported by the firmware.
Without this change, acting as a beamformee in VHT mode is not working
properly.
Tested-on: IPQ6018 hw1.0 AHB WLAN.HK.2.5.0.1-01208-QCAHKSWPL_SILICONZ-1
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-01208-QCAHKSWPL_SILICONZ-1
Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices")
Signed-off-by: Jesus Fernandez Manzano <jesus.manzano@galgus.net>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220616173947.21901-1-jesus.manzano@galgus.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Date: Tue Aug 16 23:46:13 2022 +0900
wifi: ath9k: avoid uninit memory read in ath9k_htc_rx_msg()
[ Upstream commit b383e8abed41cc6ff1a3b34de75df9397fa4878c ]
syzbot is reporting uninit value at ath9k_htc_rx_msg() [1], for
ioctl(USB_RAW_IOCTL_EP_WRITE) can call ath9k_hif_usb_rx_stream() with
pkt_len = 0 but ath9k_hif_usb_rx_stream() uses
__dev_alloc_skb(pkt_len + 32, GFP_ATOMIC) based on an assumption that
pkt_len is valid. As a result, ath9k_hif_usb_rx_stream() allocates skb
with uninitialized memory and ath9k_htc_rx_msg() is reading from
uninitialized memory.
Since bytes accessed by ath9k_htc_rx_msg() is not known until
ath9k_htc_rx_msg() is called, it would be difficult to check minimal valid
pkt_len at "if (pkt_len > 2 * MAX_RX_BUF_SIZE) {" line in
ath9k_hif_usb_rx_stream().
We have two choices. One is to workaround by adding __GFP_ZERO so that
ath9k_htc_rx_msg() sees 0 if pkt_len is invalid. The other is to let
ath9k_htc_rx_msg() validate pkt_len before accessing. This patch chose
the latter.
Note that I'm not sure threshold condition is correct, for I can't find
details on possible packet length used by this protocol.
Link: https://syzkaller.appspot.com/bug?extid=2ca247c2d60c7023de7f [1]
Reported-by: syzbot <syzbot+2ca247c2d60c7023de7f@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/7acfa1be-4b5c-b2ce-de43-95b0593fb3e5@I-love.SAKURA.ne.jp
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Wright Feng <wright.feng@cypress.com>
Date: Fri Jul 22 13:56:28 2022 +0200
wifi: brcmfmac: fix invalid address access when enabling SCAN log level
[ Upstream commit aa666b68e73fc06d83c070d96180b9010cf5a960 ]
The variable i is changed when setting random MAC address and causes
invalid address access when printing the value of pi->reqs[i]->reqid.
We replace reqs index with ri to fix the issue.
[ 136.726473] Unable to handle kernel access to user memory outside uaccess routines at virtual address 0000000000000000
[ 136.737365] Mem abort info:
[ 136.740172] ESR = 0x96000004
[ 136.743359] Exception class = DABT (current EL), IL = 32 bits
[ 136.749294] SET = 0, FnV = 0
[ 136.752481] EA = 0, S1PTW = 0
[ 136.755635] Data abort info:
[ 136.758514] ISV = 0, ISS = 0x00000004
[ 136.762487] CM = 0, WnR = 0
[ 136.765522] user pgtable: 4k pages, 48-bit VAs, pgdp = 000000005c4e2577
[ 136.772265] [0000000000000000] pgd=0000000000000000
[ 136.777160] Internal error: Oops: 96000004 [#1] PREEMPT SMP
[ 136.782732] Modules linked in: brcmfmac(O) brcmutil(O) cfg80211(O) compat(O)
[ 136.789788] Process wificond (pid: 3175, stack limit = 0x00000000053048fb)
[ 136.796664] CPU: 3 PID: 3175 Comm: wificond Tainted: G O 4.19.42-00001-g531a5f5 #1
[ 136.805532] Hardware name: Freescale i.MX8MQ EVK (DT)
[ 136.810584] pstate: 60400005 (nZCv daif +PAN -UAO)
[ 136.815429] pc : brcmf_pno_config_sched_scans+0x6cc/0xa80 [brcmfmac]
[ 136.821811] lr : brcmf_pno_config_sched_scans+0x67c/0xa80 [brcmfmac]
[ 136.828162] sp : ffff00000e9a3880
[ 136.831475] x29: ffff00000e9a3890 x28: ffff800020543400
[ 136.836786] x27: ffff8000b1008880 x26: ffff0000012bf6a0
[ 136.842098] x25: ffff80002054345c x24: ffff800088d22400
[ 136.847409] x23: ffff0000012bf638 x22: ffff0000012bf6d8
[ 136.852721] x21: ffff8000aced8fc0 x20: ffff8000ac164400
[ 136.858032] x19: ffff00000e9a3946 x18: 0000000000000000
[ 136.863343] x17: 0000000000000000 x16: 0000000000000000
[ 136.868655] x15: ffff0000093f3b37 x14: 0000000000000050
[ 136.873966] x13: 0000000000003135 x12: 0000000000000000
[ 136.879277] x11: 0000000000000000 x10: ffff000009a61888
[ 136.884589] x9 : 000000000000000f x8 : 0000000000000008
[ 136.889900] x7 : 303a32303d726464 x6 : ffff00000a1f957d
[ 136.895211] x5 : 0000000000000000 x4 : ffff00000e9a3942
[ 136.900523] x3 : 0000000000000000 x2 : ffff0000012cead8
[ 136.905834] x1 : ffff0000012bf6d8 x0 : 0000000000000000
[ 136.911146] Call trace:
[ 136.913623] brcmf_pno_config_sched_scans+0x6cc/0xa80 [brcmfmac]
[ 136.919658] brcmf_pno_start_sched_scan+0xa4/0x118 [brcmfmac]
[ 136.925430] brcmf_cfg80211_sched_scan_start+0x80/0xe0 [brcmfmac]
[ 136.931636] nl80211_start_sched_scan+0x140/0x308 [cfg80211]
[ 136.937298] genl_rcv_msg+0x358/0x3f4
[ 136.940960] netlink_rcv_skb+0xb4/0x118
[ 136.944795] genl_rcv+0x34/0x48
[ 136.947935] netlink_unicast+0x264/0x300
[ 136.951856] netlink_sendmsg+0x2e4/0x33c
[ 136.955781] __sys_sendto+0x120/0x19c
Signed-off-by: Wright Feng <wright.feng@cypress.com>
Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Alvin Å ipraga <alsi@bang-olufsen.dk>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220722115632.620681-4-alvin@pqrs.dk
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Alexander Coffin <alex.coffin@matician.com>
Date: Mon Aug 8 10:49:26 2022 -0700
wifi: brcmfmac: fix use-after-free bug in brcmf_netdev_start_xmit()
[ Upstream commit 3f42faf6db431e04bf942d2ebe3ae88975723478 ]
> ret = brcmf_proto_tx_queue_data(drvr, ifp->ifidx, skb);
may be schedule, and then complete before the line
> ndev->stats.tx_bytes += skb->len;
[ 46.912801] ==================================================================
[ 46.920552] BUG: KASAN: use-after-free in brcmf_netdev_start_xmit+0x718/0x8c8 [brcmfmac]
[ 46.928673] Read of size 4 at addr ffffff803f5882e8 by task systemd-resolve/328
[ 46.935991]
[ 46.937514] CPU: 1 PID: 328 Comm: systemd-resolve Tainted: G O 5.4.199-[REDACTED] #1
[ 46.947255] Hardware name: [REDACTED]
[ 46.954568] Call trace:
[ 46.957037] dump_backtrace+0x0/0x2b8
[ 46.960719] show_stack+0x24/0x30
[ 46.964052] dump_stack+0x128/0x194
[ 46.967557] print_address_description.isra.0+0x64/0x380
[ 46.972877] __kasan_report+0x1d4/0x240
[ 46.976723] kasan_report+0xc/0x18
[ 46.980138] __asan_report_load4_noabort+0x18/0x20
[ 46.985027] brcmf_netdev_start_xmit+0x718/0x8c8 [brcmfmac]
[ 46.990613] dev_hard_start_xmit+0x1bc/0xda0
[ 46.994894] sch_direct_xmit+0x198/0xd08
[ 46.998827] __qdisc_run+0x37c/0x1dc0
[ 47.002500] __dev_queue_xmit+0x1528/0x21f8
[ 47.006692] dev_queue_xmit+0x24/0x30
[ 47.010366] neigh_resolve_output+0x37c/0x678
[ 47.014734] ip_finish_output2+0x598/0x2458
[ 47.018927] __ip_finish_output+0x300/0x730
[ 47.023118] ip_output+0x2e0/0x430
[ 47.026530] ip_local_out+0x90/0x140
[ 47.030117] igmpv3_sendpack+0x14c/0x228
[ 47.034049] igmpv3_send_cr+0x384/0x6b8
[ 47.037895] igmp_ifc_timer_expire+0x4c/0x118
[ 47.042262] call_timer_fn+0x1cc/0xbe8
[ 47.046021] __run_timers+0x4d8/0xb28
[ 47.049693] run_timer_softirq+0x24/0x40
[ 47.053626] __do_softirq+0x2c0/0x117c
[ 47.057387] irq_exit+0x2dc/0x388
[ 47.060715] __handle_domain_irq+0xb4/0x158
[ 47.064908] gic_handle_irq+0x58/0xb0
[ 47.068581] el0_irq_naked+0x50/0x5c
[ 47.072162]
[ 47.073665] Allocated by task 328:
[ 47.077083] save_stack+0x24/0xb0
[ 47.080410] __kasan_kmalloc.isra.0+0xc0/0xe0
[ 47.084776] kasan_slab_alloc+0x14/0x20
[ 47.088622] kmem_cache_alloc+0x15c/0x468
[ 47.092643] __alloc_skb+0xa4/0x498
[ 47.096142] igmpv3_newpack+0x158/0xd78
[ 47.099987] add_grhead+0x210/0x288
[ 47.103485] add_grec+0x6b0/0xb70
[ 47.106811] igmpv3_send_cr+0x2e0/0x6b8
[ 47.110657] igmp_ifc_timer_expire+0x4c/0x118
[ 47.115027] call_timer_fn+0x1cc/0xbe8
[ 47.118785] __run_timers+0x4d8/0xb28
[ 47.122457] run_timer_softirq+0x24/0x40
[ 47.126389] __do_softirq+0x2c0/0x117c
[ 47.130142]
[ 47.131643] Freed by task 180:
[ 47.134712] save_stack+0x24/0xb0
[ 47.138041] __kasan_slab_free+0x108/0x180
[ 47.142146] kasan_slab_free+0x10/0x18
[ 47.145904] slab_free_freelist_hook+0xa4/0x1b0
[ 47.150444] kmem_cache_free+0x8c/0x528
[ 47.154292] kfree_skbmem+0x94/0x108
[ 47.157880] consume_skb+0x10c/0x5a8
[ 47.161466] __dev_kfree_skb_any+0x88/0xa0
[ 47.165598] brcmu_pkt_buf_free_skb+0x44/0x68 [brcmutil]
[ 47.171023] brcmf_txfinalize+0xec/0x190 [brcmfmac]
[ 47.176016] brcmf_proto_bcdc_txcomplete+0x1c0/0x210 [brcmfmac]
[ 47.182056] brcmf_sdio_sendfromq+0x8dc/0x1e80 [brcmfmac]
[ 47.187568] brcmf_sdio_dpc+0xb48/0x2108 [brcmfmac]
[ 47.192529] brcmf_sdio_dataworker+0xc8/0x238 [brcmfmac]
[ 47.197859] process_one_work+0x7fc/0x1a80
[ 47.201965] worker_thread+0x31c/0xc40
[ 47.205726] kthread+0x2d8/0x370
[ 47.208967] ret_from_fork+0x10/0x18
[ 47.212546]
[ 47.214051] The buggy address belongs to the object at ffffff803f588280
[ 47.214051] which belongs to the cache skbuff_head_cache of size 208
[ 47.227086] The buggy address is located 104 bytes inside of
[ 47.227086] 208-byte region [ffffff803f588280, ffffff803f588350)
[ 47.238814] The buggy address belongs to the page:
[ 47.243618] page:ffffffff00dd6200 refcount:1 mapcount:0 mapping:ffffff804b6bf800 index:0xffffff803f589900 compound_mapcount: 0
[ 47.255007] flags: 0x10200(slab|head)
[ 47.258689] raw: 0000000000010200 ffffffff00dfa980 0000000200000002 ffffff804b6bf800
[ 47.266439] raw: ffffff803f589900 0000000080190018 00000001ffffffff 0000000000000000
[ 47.274180] page dumped because: kasan: bad access detected
[ 47.279752]
[ 47.281251] Memory state around the buggy address:
[ 47.286051] ffffff803f588180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 47.293277] ffffff803f588200: fb fb fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 47.300502] >ffffff803f588280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 47.307723] ^
[ 47.314343] ffffff803f588300: fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc fc
[ 47.321569] ffffff803f588380: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb
[ 47.328789] ==================================================================
Signed-off-by: Alexander Coffin <alex.coffin@matician.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220808174925.3922558-1-alex.coffin@matician.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Hari Chandrakanthan <quic_haric@quicinc.com>
Date: Wed Jul 27 12:02:29 2022 +0530
wifi: mac80211: allow bw change during channel switch in mesh
[ Upstream commit 6b75f133fe05c36c52d691ff21545d5757fff721 ]
From 'IEEE Std 802.11-2020 section 11.8.8.4.1':
The mesh channel switch may be triggered by the need to avoid
interference to a detected radar signal, or to reassign mesh STA
channels to ensure the MBSS connectivity.
A 20/40 MHz MBSS may be changed to a 20 MHz MBSS and a 20 MHz
MBSS may be changed to a 20/40 MHz MBSS.
Since the standard allows the change of bandwidth during
the channel switch in mesh, remove the bandwidth check present in
ieee80211_set_csa_beacon.
Fixes: c6da674aff94 ("{nl,cfg,mac}80211: enable the triggering of CSA frame in mesh")
Signed-off-by: Hari Chandrakanthan <quic_haric@quicinc.com>
Link: https://lore.kernel.org/r/1658903549-21218-1-git-send-email-quic_haric@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Lorenzo Bianconi <lorenzo@kernel.org>
Date: Mon Jul 25 10:26:40 2022 +0200
wifi: mt76: mt7615: add mt7615_mutex_acquire/release in mt7615_sta_set_decap_offload
[ Upstream commit 765c69d477a44c088e5d19e7758dfa4db418e3ba ]
Similar to mt7921 driver, introduce mt7615_mutex_acquire/release in
mt7615_sta_set_decap_offload in order to avoid sending mcu commands
while the device is in low-power state.
Fixes: d4b98c63d7a77 ("mt76: mt7615: add support for rx decapsulation offload")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Howard Hsu <howard-yh.hsu@mediatek.com>
Date: Thu Aug 18 10:44:07 2022 +0800
wifi: mt76: mt7915: do not check state before configuring implicit beamform
[ Upstream commit d2b5bb6dfab29fe32bedefaade88dcd182c03a00 ]
Do not need to check running state before configuring implicit Tx
beamform. It is okay to configure implicit Tx beamform in run time.
Noted that the existing connected stations will be applied for new
configuration only if they reconnected to the interface.
Fixes: 6d6dc980e07d ("mt76: mt7915: add implicit Tx beamforming support")
Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Sean Wang <sean.wang@mediatek.com>
Date: Tue Aug 30 06:57:44 2022 +0800
wifi: mt76: mt7921: reset msta->airtime_ac while clearing up hw value
[ Upstream commit 1bf66dc31032ff5292f4d5b76436653f269fcfbd ]
We should reset mstat->airtime_ac along with clear up the entries in the
hardware WLAN table for the Rx and Rx accumulative airtime. Otherwsie, the
value msta->airtime_ac - [tx, rx]_last may be a negative and that is not
the actual airtime the device took in the last run.
Reported-by: YN Chen <YN.Chen@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: YN Chen <yn.chen@mediatek.com>
Date: Sat Jul 23 05:59:23 2022 +0800
wifi: mt76: sdio: fix transmitting packet hangs
[ Upstream commit 250b1827205846ff346a76044955cb79d4963f70 ]
Fix transmitting packets hangs with continuing to pull the pending packet
from mac80211 queues when receiving Tx status notification from the device.
Fixes: aac5104bf631 ("mt76: sdio: do not run mt76_txq_schedule directly")
Acked-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: YN Chen <yn.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Daniel Golle <daniel@makrotopia.org>
Date: Sat Sep 17 21:30:09 2022 +0100
wifi: rt2x00: correctly set BBP register 86 for MT7620
[ Upstream commit c9aada64fe6493461127f1522d7e2f01792d2424 ]
Instead of 0 set the correct value for BBP register 86 for MT7620.
Reported-by: Serge Vasilugin <vasilugin@yandex.ru>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/257267247ee4fa7ebc6a5d0c4948b3f8119c0d77.1663445157.git.daniel@makrotopia.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Daniel Golle <daniel@makrotopia.org>
Date: Sat Sep 17 21:28:29 2022 +0100
wifi: rt2x00: don't run Rt5592 IQ calibration on MT7620
[ Upstream commit d3aad83d05aec0cfd7670cf0028f2ad4b81de92e ]
The function rt2800_iq_calibrate is intended for Rt5592 only.
Don't call it for MT7620 which has it's own calibration functions.
Reported-by: Serge Vasilugin <vasilugin@yandex.ru>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/31a1c34ddbd296b82f38c18c9ae7339059215fdc.1663445157.git.daniel@makrotopia.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Daniel Golle <daniel@makrotopia.org>
Date: Sat Sep 17 21:29:26 2022 +0100
wifi: rt2x00: set correct TX_SW_CFG1 MAC register for MT7620
[ Upstream commit eeb50acf15762b61921f9df18663f839f387c054 ]
Set correct TX_SW_CFG1 MAC register as it is done also in v3 of the
vendor driver[1].
[1]: https://gitlab.com/dm38/padavan-ng/-/blob/master/trunk/proprietary/rt_wifi/rtpci/3.0.X.X/mt76x2/chips/rt6352.c#L531
Reported-by: Serge Vasilugin <vasilugin@yandex.ru>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/4be38975ce600a34249e12d09a3cb758c6e71071.1663445157.git.daniel@makrotopia.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Daniel Golle <daniel@makrotopia.org>
Date: Sat Sep 17 21:29:55 2022 +0100
wifi: rt2x00: set SoC wmac clock register
[ Upstream commit cbde6ed406a51092d9e8a2df058f5f8490f27443 ]
Instead of using the default value 33 (pci), set US_CYC_CNT init based
on Programming guide:
If available, set chipset bus clock with fallback to cpu clock/3.
Reported-by: Serge Vasilugin <vasilugin@yandex.ru>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/3e275d259f476f597dab91a9c395015ef3fe3284.1663445157.git.daniel@makrotopia.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Daniel Golle <daniel@makrotopia.org>
Date: Sat Sep 17 21:29:40 2022 +0100
wifi: rt2x00: set VGC gain for both chains of MT7620
[ Upstream commit 0e09768c085709e10ece3b68f6ac921d3f6a9caa ]
Set bbp66 for all chains of the MT7620.
Reported-by: Serge Vasilugin <vasilugin@yandex.ru>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/29e161397e5c9d9399da0fe87d44458aa2b90a78.1663445157.git.daniel@makrotopia.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Date: Sun Sep 18 15:42:25 2022 +0300
wifi: rtl8xxxu: Fix AIFS written to REG_EDCA_*_PARAM
[ Upstream commit 5574d3290449916397f3092dcd2bac92415498e1 ]
ieee80211_tx_queue_params.aifs is not supposed to be written directly
to the REG_EDCA_*_PARAM registers. Instead process it like the vendor
drivers do. It's kinda hacky but it works.
This change boosts the download speed and makes it more stable.
Tested with RTL8188FU but all the other supported chips should also
benefit.
Fixes: 26f1fad29ad9 ("New driver: rtl8xxxu (mac80211)")
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Jes Sorensen <jes@trained-monkey.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/038cc03f-3567-77ba-a7bd-c4930e3b2fad@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Date: Wed Aug 31 19:12:36 2022 +0300
wifi: rtl8xxxu: Fix skb misuse in TX queue selection
[ Upstream commit edd5747aa12ed61a5ecbfa58d3908623fddbf1e8 ]
rtl8xxxu_queue_select() selects the wrong TX queues because it's
reading memory from the wrong address. It expects to find ieee80211_hdr
at skb->data, but that's not the case after skb_push(). Move the call
to rtl8xxxu_queue_select() before the call to skb_push().
Fixes: 26f1fad29ad9 ("New driver: rtl8xxxu (mac80211)")
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/7fa4819a-4f20-b2af-b7a6-8ee01ac49295@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Date: Fri Sep 2 14:48:32 2022 +0300
wifi: rtl8xxxu: gen2: Fix mistake in path B IQ calibration
[ Upstream commit e963a19c64ac0d2f8785d36a27391abd91ac77aa ]
Found by comparing with the vendor driver. Currently this affects
only the RTL8192EU, which is the only gen2 chip with 2 TX paths
supported by this driver. It's unclear what kind of effect the
mistake had in practice, since I don't have any RTL8192EU devices
to test it.
Fixes: e1547c535ede ("rtl8xxxu: First stab at adding IQK calibration for 8723bu parts")
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/30a59f3a-cfa9-8379-7af0-78a8f4c77cfd@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Date: Fri Sep 2 16:15:30 2022 +0300
wifi: rtl8xxxu: Remove copy-paste leftover in gen2_update_rate_mask
[ Upstream commit d5350756c03cdf18696295c6b11d7acc4dbf825c ]
It looks like a leftover from copying rtl8xxxu_update_rate_mask,
which is used with the gen1 chips.
It wasn't causing any problems for my RTL8188FU test device, but it's
clearly a mistake, so remove it.
Fixes: f653e69009c6 ("rtl8xxxu: Implement basic 8723b specific update_rate_mask() function")
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/d5544fe8-9798-28f1-54bd-6839a1974b10@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dan Carpenter <error27@gmail.com>
Date: Fri Aug 19 08:22:32 2022 +0300
wifi: rtl8xxxu: tighten bounds checking in rtl8xxxu_read_efuse()
[ Upstream commit 620d5eaeb9059636864bda83ca1c68c20ede34a5 ]
There some bounds checking to ensure that "map_addr" is not out of
bounds before the start of the loop. But the checking needs to be
done as we iterate through the loop because "map_addr" gets larger as
we iterate.
Fixes: 26f1fad29ad9 ("New driver: rtl8xxxu (mac80211)")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Jes Sorensen <Jes.Sorensen@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/Yv8eGLdBslLAk3Ct@kili
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ping-Ke Shih <pkshih@realtek.com>
Date: Mon Aug 1 19:33:45 2022 +0800
wifi: rtlwifi: 8192de: correct checking of IQK reload
[ Upstream commit 93fbc1ebd978cf408ef5765e9c1630fce9a8621b ]
Since IQK could spend time, we make a cache of IQK result matrix that looks
like iqk_matrix[channel_idx].val[x][y], and we can reload the matrix if we
have made a cache. To determine a cache is made, we check
iqk_matrix[channel_idx].val[0][0].
The initial commit 7274a8c22980 ("rtlwifi: rtl8192de: Merge phy routines")
make a mistake that checks incorrect iqk_matrix[channel_idx].val[0] that
is always true, and this mistake is found by commit ee3db469dd31
("wifi: rtlwifi: remove always-true condition pointed out by GCC 12"), so
I recall the vendor driver to find fix and apply the correctness.
Fixes: 7274a8c22980 ("rtlwifi: rtl8192de: Merge phy routines")
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220801113345.42016-1-pkshih@realtek.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Yang Yingliang <yangyingliang@huawei.com>
Date: Fri Aug 26 10:38:17 2022 +0800
wifi: rtw88: add missing destroy_workqueue() on error path in rtw_core_init()
[ Upstream commit b0ea758b30bbdf7c4323c78b7c50c05d2e1224d5 ]
Add the missing destroy_workqueue() before return from rtw_core_init()
in error path.
Fixes: fe101716c7c9 ("rtw88: replace tx tasklet with work queue")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220826023817.3908255-1-yangyingliang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Luciano Leão <lucianorsleao@gmail.com>
Date: Thu Sep 22 17:00:54 2022 -0300
x86/cpu: Include the header of init_ia32_feat_ctl()'s prototype
[ Upstream commit 30ea703a38ef76ca119673cd8bdd05c6e068e2ac ]
Include the header containing the prototype of init_ia32_feat_ctl(),
solving the following warning:
$ make W=1 arch/x86/kernel/cpu/feat_ctl.o
arch/x86/kernel/cpu/feat_ctl.c:112:6: warning: no previous prototype for ‘init_ia32_feat_ctl’ [-Wmissing-prototypes]
112 | void init_ia32_feat_ctl(struct cpuinfo_x86 *c)
This warning appeared after commit
5d5103595e9e5 ("x86/cpu: Reinitialize IA32_FEAT_CTL MSR on BSP during wakeup")
had moved the function init_ia32_feat_ctl()'s prototype from
arch/x86/kernel/cpu/cpu.h to arch/x86/include/asm/cpu.h.
Note that, before the commit mentioned above, the header include "cpu.h"
(arch/x86/kernel/cpu/cpu.h) was added by commit
0e79ad863df43 ("x86/cpu: Fix a -Wmissing-prototypes warning for init_ia32_feat_ctl()")
solely to fix init_ia32_feat_ctl()'s missing prototype. So, the header
include "cpu.h" is no longer necessary.
[ bp: Massage commit message. ]
Fixes: 5d5103595e9e5 ("x86/cpu: Reinitialize IA32_FEAT_CTL MSR on BSP during wakeup")
Signed-off-by: Luciano Leão <lucianorsleao@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: NÃcolas F. R. A. Prado <n@nfraprado.net>
Link: https://lore.kernel.org/r/20220922200053.1357470-1-lucianorsleao@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Kees Cook <keescook@chromium.org>
Date: Mon Sep 19 19:45:14 2022 -0700
x86/entry: Work around Clang __bdos() bug
[ Upstream commit 3e1730842f142add55dc658929221521a9ea62b6 ]
Clang produces a false positive when building with CONFIG_FORTIFY_SOURCE=y
and CONFIG_UBSAN_BOUNDS=y when operating on an array with a dynamic
offset. Work around this by using a direct assignment of an empty
instance. Avoids this warning:
../include/linux/fortify-string.h:309:4: warning: call to __write_overflow_field declared with 'warn
ing' attribute: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Wat
tribute-warning]
__write_overflow_field(p_size_field, size);
^
which was isolated to the memset() call in xen_load_idt().
Note that this looks very much like another bug that was worked around:
https://github.com/ClangBuiltLinux/linux/issues/1592
Cc: Juergen Gross <jgross@suse.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: x86@kernel.org
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: xen-devel@lists.xenproject.org
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/lkml/41527d69-e8ab-3f86-ff37-6b298c01d5bc@oracle.com
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Vitaly Kuznetsov <vkuznets@redhat.com>
Date: Tue Aug 30 15:37:05 2022 +0200
x86/hyperv: Fix 'struct hv_enlightened_vmcs' definition
[ Upstream commit ea9da788a61e47e7ab9cbad397453e51cd82ac0d ]
Section 1.9 of TLFS v6.0b says:
"All structures are padded in such a way that fields are aligned
naturally (that is, an 8-byte field is aligned to an offset of 8 bytes
and so on)".
'struct enlightened_vmcs' has a glitch:
...
struct {
u32 nested_flush_hypercall:1; /* 836: 0 4 */
u32 msr_bitmap:1; /* 836: 1 4 */
u32 reserved:30; /* 836: 2 4 */
} hv_enlightenments_control; /* 836 4 */
u32 hv_vp_id; /* 840 4 */
u64 hv_vm_id; /* 844 8 */
u64 partition_assist_page; /* 852 8 */
...
And the observed values in 'partition_assist_page' make no sense at
all. Fix the layout by padding the structure properly.
Fixes: 68d1eb72ee99 ("x86/hyper-v: define struct hv_enlightened_vmcs and clean field bits")
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220830133737.1539624-2-vkuznets@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jane Chu <jane.chu@oracle.com>
Date: Fri Aug 26 17:38:51 2022 -0600
x86/mce: Retrieve poison range from hardware
[ Upstream commit f9781bb18ed828e7b83b7bac4a4ad7cd497ee7d7 ]
When memory poison consumption machine checks fire, MCE notifier
handlers like nfit_handle_mce() record the impacted physical address
range which is reported by the hardware in the MCi_MISC MSR. The error
information includes data about blast radius, i.e. how many cachelines
did the hardware determine are impacted. A recent change
7917f9cdb503 ("acpi/nfit: rely on mce->misc to determine poison granularity")
updated nfit_handle_mce() to stop hard coding the blast radius value of
1 cacheline, and instead rely on the blast radius reported in 'struct
mce' which can be up to 4K (64 cachelines).
It turns out that apei_mce_report_mem_error() had a similar problem in
that it hard coded a blast radius of 4K rather than reading the blast
radius from the error information. Fix apei_mce_report_mem_error() to
convey the proper poison granularity.
Signed-off-by: Jane Chu <jane.chu@oracle.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/7ed50fd8-521e-cade-77b1-738b8bfb8502@oracle.com
Link: https://lore.kernel.org/r/20220826233851.1319100-1-jane.chu@oracle.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Kees Cook <keescook@chromium.org>
Date: Wed Sep 21 20:10:10 2022 -0700
x86/microcode/AMD: Track patch allocation size explicitly
[ Upstream commit 712f210a457d9c32414df246a72781550bc23ef6 ]
In preparation for reducing the use of ksize(), record the actual
allocation size for later memcpy(). This avoids copying extra
(uninitialized!) bytes into the patch buffer when the requested
allocation size isn't exactly the size of a kmalloc bucket.
Additionally, fix potential future issues where runtime bounds checking
will notice that the buffer was allocated to a smaller value than
returned by ksize().
Fixes: 757885e94a22 ("x86, microcode, amd: Early microcode patch loading support for AMD")
Suggested-by: Daniel Micay <danielmicay@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/lkml/CA+DvKQ+bp7Y7gmaVhacjv9uF6Ar-o4tet872h4Q8RPYPJjcJQA@mail.gmail.com/
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Kohei Tarumizu <tarumizu.kohei@fujitsu.com>
Date: Wed Aug 24 09:44:10 2022 -0700
x86/resctrl: Fix to restore to original value when re-enabling hardware prefetch register
[ Upstream commit 499c8bb4693d1c8d8f3d6dd38e5bdde3ff5bd906 ]
The current pseudo_lock.c code overwrites the value of the
MSR_MISC_FEATURE_CONTROL to 0 even if the original value is not 0.
Therefore, modify it to save and restore the original values.
Fixes: 018961ae5579 ("x86/intel_rdt: Pseudo-lock region creation/removal core")
Fixes: 443810fe6160 ("x86/intel_rdt: Create debugfs files for pseudo-locking testing")
Fixes: 8a2fc0e1bc0c ("x86/intel_rdt: More precise L2 hit/miss measurements")
Signed-off-by: Kohei Tarumizu <tarumizu.kohei@fujitsu.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lkml.kernel.org/r/eb660f3c2010b79a792c573c02d01e8e841206ad.1661358182.git.reinette.chatre@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: M. Vefa Bicakci <m.v.b@runbox.com>
Date: Sun Oct 2 18:20:06 2022 -0400
xen/gntdev: Accommodate VMA splitting
commit 5c13a4a0291b30191eff9ead8d010e1ca43a4d0c upstream.
Prior to this commit, the gntdev driver code did not handle the
following scenario correctly with paravirtualized (PV) Xen domains:
* User process sets up a gntdev mapping composed of two grant mappings
(i.e., two pages shared by another Xen domain).
* User process munmap()s one of the pages.
* User process munmap()s the remaining page.
* User process exits.
In the scenario above, the user process would cause the kernel to log
the following messages in dmesg for the first munmap(), and the second
munmap() call would result in similar log messages:
BUG: Bad page map in process doublemap.test pte:... pmd:...
page:0000000057c97bff refcount:1 mapcount:-1 \
mapping:0000000000000000 index:0x0 pfn:...
...
page dumped because: bad pte
...
file:gntdev fault:0x0 mmap:gntdev_mmap [xen_gntdev] readpage:0x0
...
Call Trace:
<TASK>
dump_stack_lvl+0x46/0x5e
print_bad_pte.cold+0x66/0xb6
unmap_page_range+0x7e5/0xdc0
unmap_vmas+0x78/0xf0
unmap_region+0xa8/0x110
__do_munmap+0x1ea/0x4e0
__vm_munmap+0x75/0x120
__x64_sys_munmap+0x28/0x40
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x61/0xcb
...
For each munmap() call, the Xen hypervisor (if built with CONFIG_DEBUG)
would print out the following and trigger a general protection fault in
the affected Xen PV domain:
(XEN) d0v... Attempt to implicitly unmap d0's grant PTE ...
(XEN) d0v... Attempt to implicitly unmap d0's grant PTE ...
As of this writing, gntdev_grant_map structure's vma field (referred to
as map->vma below) is mainly used for checking the start and end
addresses of mappings. However, with split VMAs, these may change, and
there could be more than one VMA associated with a gntdev mapping.
Hence, remove the use of map->vma and rely on map->pages_vm_start for
the original start address and on (map->count << PAGE_SHIFT) for the
original mapping size. Let the invalidate() and find_special_page()
hooks use these.
Also, given that there can be multiple VMAs associated with a gntdev
mapping, move the "mmu_interval_notifier_remove(&map->notifier)" call to
the end of gntdev_put_map, so that the MMU notifier is only removed
after the closing of the last remaining VMA.
Finally, use an atomic to prevent inadvertent gntdev mapping re-use,
instead of using the map->live_grants atomic counter and/or the map->vma
pointer (the latter of which is now removed). This prevents the
userspace from mmap()'ing (with MAP_FIXED) a gntdev mapping over the
same address range as a previously set up gntdev mapping. This scenario
can be summarized with the following call-trace, which was valid prior
to this commit:
mmap
gntdev_mmap
mmap (repeat mmap with MAP_FIXED over the same address range)
gntdev_invalidate
unmap_grant_pages (sets 'being_removed' entries to true)
gnttab_unmap_refs_async
unmap_single_vma
gntdev_mmap (maps the shared pages again)
munmap
gntdev_invalidate
unmap_grant_pages
(no-op because 'being_removed' entries are true)
unmap_single_vma (For PV domains, Xen reports that a granted page
is being unmapped and triggers a general protection fault in the
affected domain, if Xen was built with CONFIG_DEBUG)
The fix for this last scenario could be worth its own commit, but we
opted for a single commit, because removing the gntdev_grant_map
structure's vma field requires guarding the entry to gntdev_mmap(), and
the live_grants atomic counter is not sufficient on its own to prevent
the mmap() over a pre-existing mapping.
Link: https://github.com/QubesOS/qubes-issues/issues/7631
Fixes: ab31523c2fca ("xen/gntdev: allow usermode to map granted pages")
Cc: stable@vger.kernel.org
Signed-off-by: M. Vefa Bicakci <m.v.b@runbox.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20221002222006.2077-3-m.v.b@runbox.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: M. Vefa Bicakci <m.v.b@runbox.com>
Date: Sun Oct 2 18:20:05 2022 -0400
xen/gntdev: Prevent leaking grants
commit 0991028cd49567d7016d1b224fe0117c35059f86 upstream.
Prior to this commit, if a grant mapping operation failed partially,
some of the entries in the map_ops array would be invalid, whereas all
of the entries in the kmap_ops array would be valid. This in turn would
cause the following logic in gntdev_map_grant_pages to become invalid:
for (i = 0; i < map->count; i++) {
if (map->map_ops[i].status == GNTST_okay) {
map->unmap_ops[i].handle = map->map_ops[i].handle;
if (!use_ptemod)
alloced++;
}
if (use_ptemod) {
if (map->kmap_ops[i].status == GNTST_okay) {
if (map->map_ops[i].status == GNTST_okay)
alloced++;
map->kunmap_ops[i].handle = map->kmap_ops[i].handle;
}
}
}
...
atomic_add(alloced, &map->live_grants);
Assume that use_ptemod is true (i.e., the domain mapping the granted
pages is a paravirtualized domain). In the code excerpt above, note that
the "alloced" variable is only incremented when both kmap_ops[i].status
and map_ops[i].status are set to GNTST_okay (i.e., both mapping
operations are successful). However, as also noted above, there are
cases where a grant mapping operation fails partially, breaking the
assumption of the code excerpt above.
The aforementioned causes map->live_grants to be incorrectly set. In
some cases, all of the map_ops mappings fail, but all of the kmap_ops
mappings succeed, meaning that live_grants may remain zero. This in turn
makes it impossible to unmap the successfully grant-mapped pages pointed
to by kmap_ops, because unmap_grant_pages has the following snippet of
code at its beginning:
if (atomic_read(&map->live_grants) == 0)
return; /* Nothing to do */
In other cases where only some of the map_ops mappings fail but all
kmap_ops mappings succeed, live_grants is made positive, but when the
user requests unmapping the grant-mapped pages, __unmap_grant_pages_done
will then make map->live_grants negative, because the latter function
does not check if all of the pages that were requested to be unmapped
were actually unmapped, and the same function unconditionally subtracts
"data->count" (i.e., a value that can be greater than map->live_grants)
from map->live_grants. The side effects of a negative live_grants value
have not been studied.
The net effect of all of this is that grant references are leaked in one
of the above conditions. In Qubes OS v4.1 (which uses Xen's grant
mechanism extensively for X11 GUI isolation), this issue manifests
itself with warning messages like the following to be printed out by the
Linux kernel in the VM that had granted pages (that contain X11 GUI
window data) to dom0: "g.e. 0x1234 still pending", especially after the
user rapidly resizes GUI VM windows (causing some grant-mapping
operations to partially or completely fail, due to the fact that the VM
unshares some of the pages as part of the window resizing, making the
pages impossible to grant-map from dom0).
The fix for this issue involves counting all successful map_ops and
kmap_ops mappings separately, and then adding the sum to live_grants.
During unmapping, only the number of successfully unmapped grants is
subtracted from live_grants. The code is also modified to check for
negative live_grants values after the subtraction and warn the user.
Link: https://github.com/QubesOS/qubes-issues/issues/7631
Fixes: dbe97cff7dd9 ("xen/gntdev: Avoid blocking in unmap_grant_pages()")
Cc: stable@vger.kernel.org
Signed-off-by: M. Vefa Bicakci <m.v.b@runbox.com>
Acked-by: Demi Marie Obenour <demi@invisiblethingslab.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20221002222006.2077-2-m.v.b@runbox.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Liu Jian <liujian56@huawei.com>
Date: Sat Sep 24 16:01:57 2022 +0800
xfrm: Reinject transport-mode packets through workqueue
[ Upstream commit 4f4920669d21e1060b7243e5118dc3b71ced1276 ]
The following warning is displayed when the tcp6-multi-diffip11 stress
test case of the LTP test suite is tested:
watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [ns-tcpserver:48198]
CPU: 0 PID: 48198 Comm: ns-tcpserver Kdump: loaded Not tainted 6.0.0-rc6+ #39
Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : des3_ede_encrypt+0x27c/0x460 [libdes]
lr : 0x3f
sp : ffff80000ceaa1b0
x29: ffff80000ceaa1b0 x28: ffff0000df056100 x27: ffff0000e51e5280
x26: ffff80004df75030 x25: ffff0000e51e4600 x24: 000000000000003b
x23: 0000000000802080 x22: 000000000000003d x21: 0000000000000038
x20: 0000000080000020 x19: 000000000000000a x18: 0000000000000033
x17: ffff0000e51e4780 x16: ffff80004e2d1448 x15: ffff80004e2d1248
x14: ffff0000e51e4680 x13: ffff80004e2d1348 x12: ffff80004e2d1548
x11: ffff80004e2d1848 x10: ffff80004e2d1648 x9 : ffff80004e2d1748
x8 : ffff80004e2d1948 x7 : 000000000bcaf83d x6 : 000000000000001b
x5 : ffff80004e2d1048 x4 : 00000000761bf3bf x3 : 000000007f1dd0a3
x2 : ffff0000e51e4780 x1 : ffff0000e3b9a2f8 x0 : 00000000db44e872
Call trace:
des3_ede_encrypt+0x27c/0x460 [libdes]
crypto_des3_ede_encrypt+0x1c/0x30 [des_generic]
crypto_cbc_encrypt+0x148/0x190
crypto_skcipher_encrypt+0x2c/0x40
crypto_authenc_encrypt+0xc8/0xfc [authenc]
crypto_aead_encrypt+0x2c/0x40
echainiv_encrypt+0x144/0x1a0 [echainiv]
crypto_aead_encrypt+0x2c/0x40
esp6_output_tail+0x1c8/0x5d0 [esp6]
esp6_output+0x120/0x278 [esp6]
xfrm_output_one+0x458/0x4ec
xfrm_output_resume+0x6c/0x1f0
xfrm_output+0xac/0x4ac
__xfrm6_output+0x130/0x270
xfrm6_output+0x60/0xec
ip6_xmit+0x2ec/0x5bc
inet6_csk_xmit+0xbc/0x10c
__tcp_transmit_skb+0x460/0x8c0
tcp_write_xmit+0x348/0x890
__tcp_push_pending_frames+0x44/0x110
tcp_rcv_established+0x3c8/0x720
tcp_v6_do_rcv+0xdc/0x4a0
tcp_v6_rcv+0xc24/0xcb0
ip6_protocol_deliver_rcu+0xf0/0x574
ip6_input_finish+0x48/0x7c
ip6_input+0x48/0xc0
ip6_rcv_finish+0x80/0x9c
xfrm_trans_reinject+0xb0/0xf4
tasklet_action_common.constprop.0+0xf8/0x134
tasklet_action+0x30/0x3c
__do_softirq+0x128/0x368
do_softirq+0xb4/0xc0
__local_bh_enable_ip+0xb0/0xb4
put_cpu_fpsimd_context+0x40/0x70
kernel_neon_end+0x20/0x40
sha1_base_do_update.constprop.0.isra.0+0x11c/0x140 [sha1_ce]
sha1_ce_finup+0x94/0x110 [sha1_ce]
crypto_shash_finup+0x34/0xc0
hmac_finup+0x48/0xe0
crypto_shash_finup+0x34/0xc0
shash_digest_unaligned+0x74/0x90
crypto_shash_digest+0x4c/0x9c
shash_ahash_digest+0xc8/0xf0
shash_async_digest+0x28/0x34
crypto_ahash_digest+0x48/0xcc
crypto_authenc_genicv+0x88/0xcc [authenc]
crypto_authenc_encrypt+0xd8/0xfc [authenc]
crypto_aead_encrypt+0x2c/0x40
echainiv_encrypt+0x144/0x1a0 [echainiv]
crypto_aead_encrypt+0x2c/0x40
esp6_output_tail+0x1c8/0x5d0 [esp6]
esp6_output+0x120/0x278 [esp6]
xfrm_output_one+0x458/0x4ec
xfrm_output_resume+0x6c/0x1f0
xfrm_output+0xac/0x4ac
__xfrm6_output+0x130/0x270
xfrm6_output+0x60/0xec
ip6_xmit+0x2ec/0x5bc
inet6_csk_xmit+0xbc/0x10c
__tcp_transmit_skb+0x460/0x8c0
tcp_write_xmit+0x348/0x890
__tcp_push_pending_frames+0x44/0x110
tcp_push+0xb4/0x14c
tcp_sendmsg_locked+0x71c/0xb64
tcp_sendmsg+0x40/0x6c
inet6_sendmsg+0x4c/0x80
sock_sendmsg+0x5c/0x6c
__sys_sendto+0x128/0x15c
__arm64_sys_sendto+0x30/0x40
invoke_syscall+0x50/0x120
el0_svc_common.constprop.0+0x170/0x194
do_el0_svc+0x38/0x4c
el0_svc+0x28/0xe0
el0t_64_sync_handler+0xbc/0x13c
el0t_64_sync+0x180/0x184
Get softirq info by bcc tool:
./softirqs -NT 10
Tracing soft irq event time... Hit Ctrl-C to end.
15:34:34
SOFTIRQ TOTAL_nsecs
block 158990
timer 20030920
sched 46577080
net_rx 676746820
tasklet 9906067650
15:34:45
SOFTIRQ TOTAL_nsecs
block 86100
sched 38849790
net_rx 676532470
timer 1163848790
tasklet 9409019620
15:34:55
SOFTIRQ TOTAL_nsecs
sched 58078450
net_rx 475156720
timer 533832410
tasklet 9431333300
The tasklet software interrupt takes too much time. Therefore, the
xfrm_trans_reinject executor is changed from tasklet to workqueue. Add add
spin lock to protect the queue. This reduces the processing flow of the
tcp_sendmsg function in this scenario.
Fixes: acf568ee859f0 ("xfrm: Reinject transport-mode packets through tasklet")
Signed-off-by: Liu Jian <liujian56@huawei.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Khalid Masum <khalid.masum.92@gmail.com>
Date: Thu Sep 1 13:12:10 2022 +0600
xfrm: Update ipcomp_scratches with NULL when freed
[ Upstream commit 8a04d2fc700f717104bfb95b0f6694e448a4537f ]
Currently if ipcomp_alloc_scratches() fails to allocate memory
ipcomp_scratches holds obsolete address. So when we try to free the
percpu scratches using ipcomp_free_scratches() it tries to vfree non
existent vm area. Described below:
static void * __percpu *ipcomp_alloc_scratches(void)
{
...
scratches = alloc_percpu(void *);
if (!scratches)
return NULL;
ipcomp_scratches does not know about this allocation failure.
Therefore holding the old obsolete address.
...
}
So when we free,
static void ipcomp_free_scratches(void)
{
...
scratches = ipcomp_scratches;
Assigning obsolete address from ipcomp_scratches
if (!scratches)
return;
for_each_possible_cpu(i)
vfree(*per_cpu_ptr(scratches, i));
Trying to free non existent page, causing warning: trying to vfree
existent vm area.
...
}
Fix this breakage by updating ipcomp_scrtches with NULL when scratches
is freed
Suggested-by: Herbert Xu <herbert@gondor.apana.org.au>
Reported-by: syzbot+5ec9bb042ddfe9644773@syzkaller.appspotmail.com
Tested-by: syzbot+5ec9bb042ddfe9644773@syzkaller.appspotmail.com
Signed-off-by: Khalid Masum <khalid.masum.92@gmail.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Rafael Mendonca <rafaelmendsr@gmail.com>
Date: Wed Sep 21 15:34:46 2022 +0300
xhci: dbc: Fix memory leak in xhci_alloc_dbc()
commit d591b32e519603524a35b172156db71df9116902 upstream.
If DbC is already in use, then the allocated memory for the xhci_dbc struct
doesn't get freed before returning NULL, which leads to a memleak.
Fixes: 534675942e90 ("xhci: dbc: refactor xhci_dbc_init()")
Cc: stable@vger.kernel.org
Signed-off-by: Rafael Mendonca <rafaelmendsr@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20220921123450.671459-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Mario Limonciello <mario.limonciello@amd.com>
Date: Wed Sep 21 15:34:47 2022 +0300
xhci: Don't show warning for reinit on known broken suspend
[ Upstream commit 484d6f7aa3283d082c87654b7fe7a7f725423dfb ]
commit 8b328f8002bc ("xhci: re-initialize the HC during resume if HCE was
set") introduced a new warning message when the host controller error
was set and re-initializing.
This is expected behavior on some designs which already set
`xhci->broken_suspend` so the new warning is alarming to some users.
Modify the code to only show the warning if this was a surprising behavior
to the XHCI driver.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216470
Fixes: 8b328f8002bc ("xhci: re-initialize the HC during resume if HCE was set")
Reported-by: Artem S. Tashkinov <aros@gmx.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20220921123450.671459-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Date: Tue Aug 30 14:17:05 2022 +0200
xsk: Fix backpressure mechanism on Tx
[ Upstream commit c00c4461689e15ac2cc3b9a595a54e4d8afd3d77 ]
Commit d678cbd2f867 ("xsk: Fix handling of invalid descriptors in XSK TX
batching API") fixed batch API usage against set of descriptors with
invalid ones but introduced a problem when AF_XDP SW rings are smaller
than HW ones. Mismatch of reported Tx'ed frames between HW generator and
user space app was observed. It turned out that backpressure mechanism
became a bottleneck when the amount of produced descriptors to CQ is
lower than what we grabbed from XSK Tx ring.
Say that 512 entries had been taken from XSK Tx ring but we had only 490
free entries in CQ. Then callsite (ZC driver) will produce only 490
entries onto HW Tx ring but 512 entries will be released from Tx ring
and this is what will be seen by the user space.
In order to fix this case, mix XSK Tx/CQ ring interractions by moving
around internal functions and changing call order:
* pull out xskq_prod_nb_free() from xskq_prod_reserve_addr_batch()
up to xsk_tx_peek_release_desc_batch();
** move xskq_cons_release_n() into xskq_cons_read_desc_batch()
After doing so, algorithm can be described as follows:
1. lookup Tx entries
2. use value from 1. to reserve space in CQ (*)
3. Read from Tx ring as much descriptors as value from 2
3a. release descriptors from XSK Tx ring (**)
4. Finally produce addresses to CQ
Fixes: d678cbd2f867 ("xsk: Fix handling of invalid descriptors in XSK TX batching API")
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220830121705.8618-1-maciej.fijalkowski@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>