Author: Takashi Iwai <tiwai@suse.de>
Date: Mon Sep 5 15:06:30 2022 +0200
ALSA: hda/sigmatel: Fix unused variable warning for beep power change
commit 51bdc8bb82525cd70feb92279c8b7660ad7948dd upstream.
The newly added stac_check_power_status() caused a compile warning
when CONFIG_SND_HDA_INPUT_BEEP is disabled. Fix it.
Fixes: 414d38ba8710 ("ALSA: hda/sigmatel: Keep power up while beep is enabled")
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20220905130630.2845-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Takashi Iwai <tiwai@suse.de>
Date: Sun Sep 4 09:27:50 2022 +0200
ALSA: hda/sigmatel: Keep power up while beep is enabled
[ Upstream commit 414d38ba871092aeac4ed097ac4ced89486646f7 ]
It seems that the beep playback doesn't work well on IDT codec devices
when the codec auto-pm is enabled. Keep the power on while the beep
switch is enabled.
Link: https://bugzilla.suse.com/show_bug.cgi?id=1200544
Link: https://lore.kernel.org/r/20220904072750.26164-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Mohan Kumar <mkumard@nvidia.com>
Date: Tue Sep 13 11:06:41 2022 +0530
ALSA: hda/tegra: set depop delay for tegra
commit 3c4d8c24fb6c44f426e447b04800b0ed61a7b5ae upstream.
Reduce the suspend time by setting depop delay to 10ms for
tegra.
Signed-off-by: Mohan Kumar <mkumard@nvidia.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220913053641.23299-1-mkumard@nvidia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Date: Mon Sep 12 21:37:16 2022 +0300
ALSA: hda: add Intel 5 Series / 3400 PCI DID
commit 4d40ceef4745536289012670103c59264e0fb3ec upstream.
Handle 0x3b57 variant with same AZX_DCAPS_INTEL_PCH_NOPM
capabilities as 0x3b56. In practise this allow use of HDMI/DP
display audio via i915.
BugLink: https://gitlab.freedesktop.org/drm/intel/-/issues/2751
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220912183716.2126312-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Fabio Estevam <festevam@denx.de>
Date: Sat Aug 27 14:51:39 2022 -0300
arm64: dts: rockchip: Remove 'enable-active-low' from rk3399-puma
[ Upstream commit a994b34b9abb9c08ee09e835b4027ff2147f9d94 ]
The 'enable-active-low' property is not a valid one.
Only 'enable-active-high' is valid, and when this property is absent
the gpio regulator will act as active low by default.
Remove the invalid 'enable-active-low' property.
Fixes: 2c66fc34e945 ("arm64: dts: rockchip: add RK3399-Q7 (Puma) SoM")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Link: https://lore.kernel.org/r/20220827175140.1696699-1-festevam@denx.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Takashi Iwai <tiwai@suse.de>
Date: Tue Aug 23 10:09:57 2022 +0200
ASoC: nau8824: Fix semaphore unbalance at error paths
[ Upstream commit 5628560e90395d3812800a8e44a01c32ffa429ec ]
The semaphore of nau8824 wasn't properly unlocked at some error
handling code paths, hence this may result in the unbalance (and
potential lock-up). Fix them to handle the semaphore up properly.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20220823081000.2965-3-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Marc Kleine-Budde <mkl@pengutronix.de>
Date: Tue Sep 20 11:40:56 2022 +0200
can: gs_usb: gs_can_open(): fix race dev->can.state condition
[ Upstream commit 5440428b3da65408dba0241985acb7a05258b85e ]
The dev->can.state is set to CAN_STATE_ERROR_ACTIVE, after the device
has been started. On busy networks the CAN controller might receive
CAN frame between and go into an error state before the dev->can.state
is assigned.
Assign dev->can.state before starting the controller to close the race
window.
Fixes: d08e973a77d1 ("can: gs_usb: Added support for the GS_USB CAN devices")
Link: https://lore.kernel.org/all/20220920195216.232481-1-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Stefan Metzmacher <metze@samba.org>
Date: Wed Sep 14 05:25:46 2022 +0200
cifs: don't send down the destination address to sendmsg for a SOCK_STREAM
commit 17d3df38dc5f4cec9b0ac6eb79c1859b6e2693a4 upstream.
This is ignored anyway by the tcp layer.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Cc: stable@vger.kernel.org
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Vitaly Kuznetsov <vkuznets@redhat.com>
Date: Sat Aug 27 15:03:45 2022 +0200
Drivers: hv: Never allocate anything besides framebuffer from framebuffer memory region
[ Upstream commit f0880e2cb7e1f8039a048fdd01ce45ab77247221 ]
Passed through PCI device sometimes misbehave on Gen1 VMs when Hyper-V
DRM driver is also loaded. Looking at IOMEM assignment, we can see e.g.
$ cat /proc/iomem
...
f8000000-fffbffff : PCI Bus 0000:00
f8000000-fbffffff : 0000:00:08.0
f8000000-f8001fff : bb8c4f33-2ba2-4808-9f7f-02f3b4da22fe
...
fe0000000-fffffffff : PCI Bus 0000:00
fe0000000-fe07fffff : bb8c4f33-2ba2-4808-9f7f-02f3b4da22fe
fe0000000-fe07fffff : 2ba2:00:02.0
fe0000000-fe07fffff : mlx4_core
the interesting part is the 'f8000000' region as it is actually the
VM's framebuffer:
$ lspci -v
...
0000:00:08.0 VGA compatible controller: Microsoft Corporation Hyper-V virtual VGA (prog-if 00 [VGA controller])
Flags: bus master, fast devsel, latency 0, IRQ 11
Memory at f8000000 (32-bit, non-prefetchable) [size=64M]
...
hv_vmbus: registering driver hyperv_drm
hyperv_drm 5620e0c7-8062-4dce-aeb7-520c7ef76171: [drm] Synthvid Version major 3, minor 5
hyperv_drm 0000:00:08.0: vgaarb: deactivate vga console
hyperv_drm 0000:00:08.0: BAR 0: can't reserve [mem 0xf8000000-0xfbffffff]
hyperv_drm 5620e0c7-8062-4dce-aeb7-520c7ef76171: [drm] Cannot request framebuffer, boot fb still active?
Note: "Cannot request framebuffer" is not a fatal error in
hyperv_setup_gen1() as the code assumes there's some other framebuffer
device there but we actually have some other PCI device (mlx4 in this
case) config space there!
The problem appears to be that vmbus_allocate_mmio() can use dedicated
framebuffer region to serve any MMIO request from any device. The
semantics one might assume of a parameter named "fb_overlap_ok"
aren't implemented because !fb_overlap_ok essentially has no effect.
The existing semantics are really "prefer_fb_overlap". This patch
implements the expected and needed semantics, which is to not allocate
from the frame buffer space when !fb_overlap_ok.
Note, Gen2 VMs are usually unaffected by the issue because
framebuffer region is already taken by EFI fb (in case kernel supports
it) but Gen1 VMs may have this region unclaimed by the time Hyper-V PCI
pass-through driver tries allocating MMIO space if Hyper-V DRM/FB drivers
load after it. Devices can be brought up in any sequence so let's
resolve the issue by always ignoring 'fb_mmio' region for non-FB
requests, even if the region is unclaimed.
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20220827130345.1320254-4-vkuznets@redhat.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Stuart Menefy <stuart.menefy@mathembedded.com>
Date: Thu Sep 8 16:51:03 2022 +0100
drm/meson: Correct OSD1 global alpha value
[ Upstream commit 6836829c8ea453c9e3e518e61539e35881c8ed5f ]
VIU_OSD1_CTRL_STAT.GLOBAL_ALPHA is a 9 bit field, so the maximum
value is 0x100 not 0xff.
This matches the vendor kernel.
Signed-off-by: Stuart Menefy <stuart.menefy@mathembedded.com>
Fixes: bbbe775ec5b5 ("drm: Add support for Amlogic Meson Graphic Controller")
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220908155103.686904-1-stuart.menefy@mathembedded.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jan Kara <jack@suse.cz>
Date: Thu Sep 8 11:21:26 2022 +0200
ext4: make directory inode spreading reflect flexbg size
commit 613c5a85898d1cd44e68f28d65eccf64a8ace9cf upstream.
Currently the Orlov inode allocator searches for free inodes for a
directory only in flex block groups with at most inodes_per_group/16
more directory inodes than average per flex block group. However with
growing size of flex block group this becomes unnecessarily strict.
Scale allowed difference from average directory count per flex block
group with flex block group size as we do with other metrics.
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Tested-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Cc: stable@kernel.org
Link: https://lore.kernel.org/all/0d81a7c2-46b7-6010-62a4-3e6cfc1628d6@i2se.com/
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220908092136.11770-3-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Pali Rohár <pali@kernel.org>
Date: Tue Sep 6 12:54:31 2022 +0200
gpio: mpc8xxx: Fix support for IRQ_TYPE_LEVEL_LOW flow_type in mpc85xx
[ Upstream commit 279c12df8d2efb28def9d037f288cbfb97c30fe2 ]
Commit e39d5ef67804 ("powerpc/5xxx: extend mpc8xxx_gpio driver to support
mpc512x gpios") implemented support for IRQ_TYPE_LEVEL_LOW flow type in
mpc512x via falling edge type. Do same for mpc85xx which support was added
in commit 345e5c8a1cc3 ("powerpc: Add interrupt support to mpc8xxx_gpio").
Fixes probing of lm90 hwmon driver on mpc85xx based board which use level
interrupt. Without it kernel prints error and refuse lm90 to work:
[ 15.258370] genirq: Setting trigger mode 8 for irq 49 failed (mpc8xxx_irq_set_type+0x0/0xf8)
[ 15.267168] lm90 0-004c: cannot request IRQ 49
[ 15.272708] lm90: probe of 0-004c failed with error -22
Fixes: 345e5c8a1cc3 ("powerpc: Add interrupt support to mpc8xxx_gpio")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Brett Creeley <brett.creeley@intel.com>
Date: Thu Sep 1 16:34:40 2022 +0200
iavf: Fix cached head and tail value for iavf_get_tx_pending
[ Upstream commit 809f23c0423a43266e47a7dc67e95b5cb4d1cbfc ]
The underlying hardware may or may not allow reading of the head or tail
registers and it really makes no difference if we use the software
cached values. So, always used the software cached values.
Fixes: 9c6c12595b73 ("i40e: Detection and recovery of TX queue hung logic moved to service_task from tx_timeout")
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Co-developed-by: Norbert Zulinski <norbertx.zulinski@intel.com>
Signed-off-by: Norbert Zulinski <norbertx.zulinski@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Lu Wei <luwei32@huawei.com>
Date: Wed Sep 7 18:12:04 2022 +0800
ipvlan: Fix out-of-bound bugs caused by unset skb->mac_header
[ Upstream commit 81225b2ea161af48e093f58e8dfee6d705b16af4 ]
If an AF_PACKET socket is used to send packets through ipvlan and the
default xmit function of the AF_PACKET socket is changed from
dev_queue_xmit() to packet_direct_xmit() via setsockopt() with the option
name of PACKET_QDISC_BYPASS, the skb->mac_header may not be reset and
remains as the initial value of 65535, this may trigger slab-out-of-bounds
bugs as following:
=================================================================
UG: KASAN: slab-out-of-bounds in ipvlan_xmit_mode_l2+0xdb/0x330 [ipvlan]
PU: 2 PID: 1768 Comm: raw_send Kdump: loaded Not tainted 6.0.0-rc4+ #6
ardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33
all Trace:
print_address_description.constprop.0+0x1d/0x160
print_report.cold+0x4f/0x112
kasan_report+0xa3/0x130
ipvlan_xmit_mode_l2+0xdb/0x330 [ipvlan]
ipvlan_start_xmit+0x29/0xa0 [ipvlan]
__dev_direct_xmit+0x2e2/0x380
packet_direct_xmit+0x22/0x60
packet_snd+0x7c9/0xc40
sock_sendmsg+0x9a/0xa0
__sys_sendto+0x18a/0x230
__x64_sys_sendto+0x74/0x90
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
The root cause is:
1. packet_snd() only reset skb->mac_header when sock->type is SOCK_RAW
and skb->protocol is not specified as in packet_parse_headers()
2. packet_direct_xmit() doesn't reset skb->mac_header as dev_queue_xmit()
In this case, skb->mac_header is 65535 when ipvlan_xmit_mode_l2() is
called. So when ipvlan_xmit_mode_l2() gets mac header with eth_hdr() which
use "skb->head + skb->mac_header", out-of-bound access occurs.
This patch replaces eth_hdr() with skb_eth_hdr() in ipvlan_xmit_mode_l2()
and reset mac header in multicast to solve this out-of-bound bug.
Fixes: 2ad7bf363841 ("ipvlan: Initial check-in of the IPVLAN driver.")
Signed-off-by: Lu Wei <luwei32@huawei.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Date: Wed Sep 28 10:56:52 2022 +0200
Linux 4.14.295
Link: https://lore.kernel.org/r/20220926100738.148626940@linuxfoundation.org
Link: https://lore.kernel.org/r/20220926163535.997144838@linuxfoundation.org
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Dongliang Mu <mudongliangabcd@gmail.com>
Date: Sat Jan 22 15:44:59 2022 +0800
media: em28xx: initialize refcount before kref_get
commit c08eadca1bdfa099e20a32f8fa4b52b2f672236d upstream.
The commit 47677e51e2a4("[media] em28xx: Only deallocate struct
em28xx after finishing all extensions") adds kref_get to many init
functions (e.g., em28xx_audio_init). However, kref_init is called too
late in em28xx_usb_probe, since em28xx_init_dev before will invoke
those init functions and call kref_get function. Then refcount bug
occurs in my local syzkaller instance.
Fix it by moving kref_init before em28xx_init_dev. This issue occurs
not only in dev but also dev->dev_next.
Fixes: 47677e51e2a4 ("[media] em28xx: Only deallocate struct em28xx after finishing all extensions")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[DP: drop changes related to dev->dev_next as second tuner functionality was added in 4.16]
Signed-off-by: Dragos-Marian Panait <dragos.panait@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Randy Dunlap <rdunlap@infradead.org>
Date: Sat Sep 17 16:25:40 2022 -0700
MIPS: lantiq: export clk_get_io() for lantiq_wdt.ko
[ Upstream commit 502550123bee6a2ffa438409b5b9aad4d6db3a8c ]
The lantiq WDT driver uses clk_get_io(), which is not exported,
so export it to fix a build error:
ERROR: modpost: "clk_get_io" [drivers/watchdog/lantiq_wdt.ko] undefined!
Fixes: 287e3f3f4e68 ("MIPS: lantiq: implement support for clkdev api")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: John Crispin <john@phrozen.org>
Cc: linux-mips@vger.kernel.org
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Date: Tue Sep 6 11:59:43 2022 +0200
MIPS: OCTEON: irq: Fix octeon_irq_force_ciu_mapping()
[ Upstream commit ba912afbd611d3a5f22af247721a071ad1d5b9e0 ]
For irq_domain_associate() to work the virq descriptor has to be
pre-allocated in advance. Otherwise the following happens:
WARNING: CPU: 0 PID: 0 at .../kernel/irq/irqdomain.c:527 irq_domain_associate+0x298/0x2e8
error: virq128 is not allocated
Modules linked in:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.19.78-... #1
...
Call Trace:
[<ffffffff801344c4>] show_stack+0x9c/0x130
[<ffffffff80769550>] dump_stack+0x90/0xd0
[<ffffffff801576d0>] __warn+0x118/0x130
[<ffffffff80157734>] warn_slowpath_fmt+0x4c/0x70
[<ffffffff801b83c0>] irq_domain_associate+0x298/0x2e8
[<ffffffff80a43bb8>] octeon_irq_init_ciu+0x4c8/0x53c
[<ffffffff80a76cbc>] of_irq_init+0x1e0/0x388
[<ffffffff80a452cc>] init_IRQ+0x4c/0xf4
[<ffffffff80a3cc00>] start_kernel+0x404/0x698
Use irq_alloc_desc_at() to avoid the above problem.
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Youling Tang <tangyouling@loongson.cn>
Date: Thu Sep 1 19:10:59 2022 +0800
mksysmap: Fix the mismatch of 'L0' symbols in System.map
[ Upstream commit c17a2538704f926ee4d167ba625e09b1040d8439 ]
When System.map was generated, the kernel used mksysmap to filter the
kernel symbols, we need to filter "L0" symbols in LoongArch architecture.
$ cat System.map | grep L0
9000000000221540 t L0
The L0 symbol exists in System.map, but not in .tmp_System.map. When
"cmp -s System.map .tmp_System.map" will show "Inconsistent kallsyms
data" error message in link-vmlinux.sh script.
Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Chao Yu <chao.yu@oppo.com>
Date: Wed Aug 31 22:54:54 2022 +0800
mm/slub: fix to return errno if kmalloc() fails
commit 7e9c323c52b379d261a72dc7bd38120a761a93cd upstream.
In create_unique_id(), kmalloc(, GFP_KERNEL) can fail due to
out-of-memory, if it fails, return errno correctly rather than
triggering panic via BUG_ON();
kernel BUG at mm/slub.c:5893!
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
Call trace:
sysfs_slab_add+0x258/0x260 mm/slub.c:5973
__kmem_cache_create+0x60/0x118 mm/slub.c:4899
create_cache mm/slab_common.c:229 [inline]
kmem_cache_create_usercopy+0x19c/0x31c mm/slab_common.c:335
kmem_cache_create+0x1c/0x28 mm/slab_common.c:390
f2fs_kmem_cache_create fs/f2fs/f2fs.h:2766 [inline]
f2fs_init_xattr_caches+0x78/0xb4 fs/f2fs/xattr.c:808
f2fs_fill_super+0x1050/0x1e0c fs/f2fs/super.c:4149
mount_bdev+0x1b8/0x210 fs/super.c:1400
f2fs_mount+0x44/0x58 fs/f2fs/super.c:4512
legacy_get_tree+0x30/0x74 fs/fs_context.c:610
vfs_get_tree+0x40/0x140 fs/super.c:1530
do_new_mount+0x1dc/0x4e4 fs/namespace.c:3040
path_mount+0x358/0x914 fs/namespace.c:3370
do_mount fs/namespace.c:3383 [inline]
__do_sys_mount fs/namespace.c:3591 [inline]
__se_sys_mount fs/namespace.c:3568 [inline]
__arm64_sys_mount+0x2f8/0x408 fs/namespace.c:3568
Cc: <stable@kernel.org>
Fixes: 81819f0fc8285 ("SLUB core")
Reported-by: syzbot+81684812ea68216e08c5@syzkaller.appspotmail.com
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Chao Yu <chao.yu@oppo.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Sean Anderson <seanga2@gmail.com>
Date: Tue Sep 20 19:50:18 2022 -0400
net: sunhme: Fix packet reception for len < RX_COPY_THRESHOLD
[ Upstream commit 878e2405710aacfeeb19364c300f38b7a9abfe8f ]
There is a separate receive path for small packets (under 256 bytes).
Instead of allocating a new dma-capable skb to be used for the next packet,
this path allocates a skb and copies the data into it (reusing the existing
sbk for the next packet). There are two bytes of junk data at the beginning
of every packet. I believe these are inserted in order to allow aligned DMA
and IP headers. We skip over them using skb_reserve. Before copying over
the data, we must use a barrier to ensure we see the whole packet. The
current code only synchronizes len bytes, starting from the beginning of
the packet, including the junk bytes. However, this leaves off the final
two bytes in the packet. Synchronize the whole packet.
To reproduce this problem, ping a HME with a payload size between 17 and
214
$ ping -s 17 <hme_address>
which will complain rather loudly about the data mismatch. Small packets
(below 60 bytes on the wire) do not have this issue. I suspect this is
related to the padding added to increase the minimum packet size.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220920235018.1675956-1-seanga2@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Benjamin Poirier <bpoirier@nvidia.com>
Date: Wed Sep 7 16:56:41 2022 +0900
net: team: Unsync device addresses on ndo_stop
[ Upstream commit bd60234222b2fd5573526da7bcd422801f271f5f ]
Netdev drivers are expected to call dev_{uc,mc}_sync() in their
ndo_set_rx_mode method and dev_{uc,mc}_unsync() in their ndo_stop method.
This is mentioned in the kerneldoc for those dev_* functions.
The team driver calls dev_{uc,mc}_unsync() during ndo_uninit instead of
ndo_stop. This is ineffective because address lists (dev->{uc,mc}) have
already been emptied in unregister_netdevice_many() before ndo_uninit is
called. This mistake can result in addresses being leftover on former team
ports after a team device has been deleted; see test_LAG_cleanup() in the
last patch in this series.
Add unsync calls at their expected location, team_close().
v3:
* When adding or deleting a port, only sync/unsync addresses if the team
device is up. In other cases, it is taken care of at the right time by
ndo_open/ndo_set_rx_mode/ndo_stop.
Fixes: 3d249d4ca7d0 ("net: introduce ethernet teaming device")
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: jerry.meng <jerry-meng@foxmail.com>
Date: Mon Sep 5 09:24:52 2022 +0800
net: usb: qmi_wwan: add Quectel RM520N
[ Upstream commit e1091e226a2bab4ded1fe26efba2aee1aab06450 ]
add support for Quectel RM520N which is based on Qualcomm SDX62 chip.
0x0801: DIAG + NMEA + AT + MODEM + RMNET
T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 10 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=2c7c ProdID=0801 Rev= 5.04
S: Manufacturer=Quectel
S: Product=RM520N-GL
S: SerialNumber=384af524
C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option
E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Signed-off-by: jerry.meng <jerry-meng@foxmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Link: https://lore.kernel.org/r/tencent_E50CA8A206904897C2D20DDAE90731183C05@qq.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Florian Westphal <fw@strlen.de>
Date: Tue Sep 20 14:20:17 2022 +0200
netfilter: ebtables: fix memory leak when blob is malformed
[ Upstream commit 62ce44c4fff947eebdf10bb582267e686e6835c9 ]
The bug fix was incomplete, it "replaced" crash with a memory leak.
The old code had an assignment to "ret" embedded into the conditional,
restore this.
Fixes: 7997eff82828 ("netfilter: ebtables: reject blobs that don't provide all entry points")
Reported-and-tested-by: syzbot+a24c5252f3e3ab733464@syzkaller.appspotmail.com
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: David Leadbeater <dgl@dgl.cx>
Date: Fri Aug 26 14:56:57 2022 +1000
netfilter: nf_conntrack_irc: Tighten matching on DCC message
[ Upstream commit e8d5dfd1d8747b56077d02664a8838c71ced948e ]
CTCP messages should only be at the start of an IRC message, not
anywhere within it.
While the helper only decodes packes in the ORIGINAL direction, its
possible to make a client send a CTCP message back by empedding one into
a PING request. As-is, thats enough to make the helper believe that it
saw a CTCP message.
Fixes: 869f37d8e48f ("[NETFILTER]: nf_conntrack/nf_nat: add IRC helper port")
Signed-off-by: David Leadbeater <dgl@dgl.cx>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Igor Ryzhov <iryzhov@nfware.com>
Date: Wed Jun 5 12:32:40 2019 +0300
netfilter: nf_conntrack_sip: fix ct_sip_walk_headers
[ Upstream commit 39aebedeaaa95757f5c1f2ddb5f43fdddbf478ca ]
ct_sip_next_header and ct_sip_get_header return an absolute
value of matchoff, not a shift from current dataoff.
So dataoff should be assigned matchoff, not incremented by it.
This issue can be seen in the scenario when there are multiple
Contact headers and the first one is using a hostname and other headers
use IP addresses. In this case, ct_sip_walk_headers will work as follows:
The first ct_sip_get_header call to will find the first Contact header
but will return -1 as the header uses a hostname. But matchoff will
be changed to the offset of this header. After that, dataoff should be
set to matchoff, so that the next ct_sip_get_header call find the next
Contact header. But instead of assigning dataoff to matchoff, it is
incremented by it, which is not correct, as matchoff is an absolute
value of the offset. So on the next call to the ct_sip_get_header,
dataoff will be incorrect, and the next Contact header may not be
found at all.
Fixes: 05e3ced297fe ("[NETFILTER]: nf_conntrack_sip: introduce SIP-URI parsing helper")
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Sergey Shtylyov <s.shtylyov@omp.ru>
Date: Sat Aug 13 23:34:16 2022 +0300
of: fdt: fix off-by-one error in unflatten_dt_nodes()
[ Upstream commit 2f945a792f67815abca26fa8a5e863ccf3fa1181 ]
Commit 78c44d910d3e ("drivers/of: Fix depth when unflattening devicetree")
forgot to fix up the depth check in the loop body in unflatten_dt_nodes()
which makes it possible to overflow the nps[] buffer...
Found by Linux Verification Center (linuxtesting.org) with the SVACE static
analysis tool.
Fixes: 78c44d910d3e ("drivers/of: Fix depth when unflattening devicetree")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/7c354554-006f-6b31-c195-cdfe4caee392@omp.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Liang He <windhl@126.com>
Date: Tue Sep 13 20:56:59 2022 +0800
of: mdio: Add of_node_put() when breaking out of for_each_xx
[ Upstream commit 1c48709e6d9d353acaaac1d8e33474756b121d78 ]
In of_mdiobus_register(), we should call of_node_put() for 'child'
escaped out of for_each_available_child_of_node().
Fixes: 66bdede495c7 ("of_mdio: Fix broken PHY IRQ in case of probe deferral")
Co-developed-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Liang He <windhl@126.com>
Link: https://lore.kernel.org/r/20220913125659.3331969-1-windhl@126.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Yang Yingliang <yangyingliang@huawei.com>
Date: Wed Aug 24 17:36:57 2022 +0800
parisc: ccio-dma: Add missing iounmap in error path in ccio_probe()
[ Upstream commit 38238be4e881a5d0abbe4872b4cd6ed790be06c8 ]
Add missing iounmap() before return from ccio_probe(), if ccio_init_resources()
fails.
Fixes: d46c742f827f ("parisc: ccio-dma: Handle kmalloc failure in ccio_init_resources()")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Adrian Hunter <adrian.hunter@intel.com>
Date: Wed Sep 14 15:24:29 2022 +0300
perf kcore_copy: Do not check /proc/modules is unchanged
[ Upstream commit 5b427df27b94aec1312cace48a746782a0925c53 ]
/proc/kallsyms and /proc/modules are compared before and after the copy
in order to ensure no changes during the copy.
However /proc/modules also might change due to reference counts changing
even though that does not make any difference.
Any modules loaded or unloaded should be visible in changes to kallsyms,
so it is not necessary to check /proc/modules also anyway.
Remove the comparison checking that /proc/modules is unchanged.
Fixes: fc1b691d7651d949 ("perf buildid-cache: Add ability to add kcore to the cache")
Reported-by: Daniel Dao <dqminh@cloudflare.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Daniel Dao <dqminh@cloudflare.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20220914122429.8770-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Xiaolei Wang <xiaolei.wang@windriver.com>
Date: Thu Aug 25 19:19:22 2022 +0800
regulator: pfuze100: Fix the global-out-of-bounds access in pfuze100_regulator_probe()
[ Upstream commit 78e1e867f44e6bdc72c0e6a2609a3407642fb30b ]
The pfuze_chip::regulator_descs is an array of size
PFUZE100_MAX_REGULATOR, the pfuze_chip::pfuze_regulators
is the pointer to the real regulators of a specific device.
The number of real regulator is supposed to be less than
the PFUZE100_MAX_REGULATOR, so we should use the size of
'regulator_num * sizeof(struct pfuze_regulator)' in memcpy().
This fixes the out of bounds access bug reported by KASAN.
Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com>
Link: https://lore.kernel.org/r/20220825111922.1368055-1-xiaolei.wang@windriver.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Stefan Haberland <sth@linux.ibm.com>
Date: Mon Sep 19 17:49:31 2022 +0200
s390/dasd: fix Oops in dasd_alias_get_start_dev due to missing pavgroup
commit db7ba07108a48c0f95b74fabbfd5d63e924f992d upstream.
Fix Oops in dasd_alias_get_start_dev() function caused by the pavgroup
pointer being NULL.
The pavgroup pointer is checked on the entrance of the function but
without the lcu->lock being held. Therefore there is a race window
between dasd_alias_get_start_dev() and _lcu_update() which sets
pavgroup to NULL with the lcu->lock held.
Fix by checking the pavgroup pointer with lcu->lock held.
Cc: <stable@vger.kernel.org> # 2.6.25+
Fixes: 8e09f21574ea ("[S390] dasd: add hyper PAV support to DASD device driver, part 1")
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Link: https://lore.kernel.org/r/20220919154931.4123002-2-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Date: Thu Sep 1 17:39:32 2022 +0300
serial: Create uart_xmit_advance()
commit e77cab77f2cb3a1ca2ba8df4af45bb35617ac16d upstream.
A very common pattern in the drivers is to advance xmit tail
index and do bookkeeping of Tx'ed characters. Create
uart_xmit_advance() to handle it.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220901143934.8850-2-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Date: Thu Sep 1 17:39:33 2022 +0300
serial: tegra: Use uart_xmit_advance(), fixes icount.tx accounting
commit 754f68044c7dd6c52534ba3e0f664830285c4b15 upstream.
DMA complete & stop paths did not correctly account Tx'ed characters
into icount.tx. Using uart_xmit_advance() fixes the problem.
Fixes: e9ea096dd225 ("serial: tegra: add serial driver")
Cc: <stable@vger.kernel.org> # serial: Create uart_xmit_advance()
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220901143934.8850-3-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Alan Stern <stern@rowland.harvard.edu>
Date: Thu Sep 1 10:36:34 2022 -0400
USB: core: Fix RST error in hub.c
commit 766a96dc558385be735a370db867e302c8f22153 upstream.
A recent commit added an invalid RST expression to a kerneldoc comment
in hub.c. The fix is trivial.
Fixes: 9c6d778800b9 ("USB: core: Prevent nested device-reset calls")
Cc: <stable@vger.kernel.org>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/YxDDcsLtRZ7c20pq@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Carl Yin(殷张成) <carl.yin@quectel.com>
Date: Fri Sep 2 09:49:43 2022 +0000
USB: serial: option: add Quectel BG95 0x0203 composition
commit f8f67eff6847f9b8d753fa029723bcc54296055a upstream.
Add support for the following Quectel BG95 composition:
0x0203: Diag + GNSS + Modem + ECM
usb-devices output:
T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=2c7c ProdID=0203 Rev= 0.00
S: Manufacturer=Quectel, Incorporated
S: Product=Quectel LPWA Module
S: SerialNumber=71d3a21b
C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
A: FirstIf#= 3 IfCount= 2 Cls=02(comm.) Sub=00 Prot=00
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether
E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
I: If#= 4 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
I:* If#= 4 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Signed-off-by: Carl Yin <carl.yin@quectel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: jerry meng <jerry-meng@foxmail.com>
Date: Mon Sep 5 14:35:33 2022 +0800
USB: serial: option: add Quectel RM520N
commit d640c4cb8f2f933c0ca896541f9de7fb1ae245f4 upstream.
add support for Quectel RM520N which is based on Qualcomm SDX62 chip.
0x0801: DIAG + NMEA + AT + MODEM + RMNET
T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 10 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=2c7c ProdID=0801 Rev= 5.04
S: Manufacturer=Quectel
S: Product=RM520N-GL
S: SerialNumber=384af524
C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option
E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Signed-off-by: jerry meng <jerry-meng@foxmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Hyunwoo Kim <imv4bel@gmail.com>
Date: Mon Jun 20 07:17:46 2022 -0700
video: fbdev: pxa3xx-gcu: Fix integer overflow in pxa3xx_gcu_write
[ Upstream commit a09d2d00af53b43c6f11e6ab3cb58443c2cac8a7 ]
In pxa3xx_gcu_write, a count parameter of type size_t is passed to words of
type int. Then, copy_from_user() may cause a heap overflow because it is used
as the third argument of copy_from_user().
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Siddh Raman Pant <code@siddh.me>
Date: Sat Aug 20 01:33:40 2022 +0530
wifi: mac80211: Fix UAF in ieee80211_scan_rx()
[ Upstream commit 60deb9f10eec5c6a20252ed36238b55d8b614a2c ]
ieee80211_scan_rx() tries to access scan_req->flags after a
null check, but a UAF is observed when the scan is completed
and __ieee80211_scan_completed() executes, which then calls
cfg80211_scan_done() leading to the freeing of scan_req.
Since scan_req is rcu_dereference()'d, prevent the racing in
__ieee80211_scan_completed() by ensuring that from mac80211's
POV it is no longer accessed from an RCU read critical section
before we call cfg80211_scan_done().
Cc: stable@vger.kernel.org
Link: https://syzkaller.appspot.com/bug?extid=f9acff9bf08a845f225d
Reported-by: syzbot+f9acff9bf08a845f225d@syzkaller.appspotmail.com
Suggested-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Siddh Raman Pant <code@siddh.me>
Link: https://lore.kernel.org/r/20220819200340.34826-1-code@siddh.me
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>