The OpenNET Project / Index page

[ новости /+++ | форум | wiki | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 ТемаНаборКатегория 
 
 [Cписок руководств | Печать]

vidcontrol (1)
  • >> vidcontrol (1) ( FreeBSD man: Команды и прикладные программы пользовательского уровня )
  • Ключ vidcontrol обнаружен в базе ключевых слов.

  • BSD mandoc
     

    NAME

    
    
    vidcontrol
    
     - system console control and configuration utility
    
     
    

    SYNOPSIS

    [-CdLHPpx ] [-b color ] [-c appearance ] [-f [size ] file ] [-g geometry ] [-h size ] [-i adapter | mode ] [-l screen_map ] [-M char ] [-m on | off ] [-r foreground background ] [-S on | off ] [-s number ] [-t N | off ] [mode ] [foreground [background ] ] [show ]  

    DESCRIPTION

    The utility is used to set various options for the syscons(4) console driver, such as video mode, colors, cursor shape, screen output map, font and screen saver timeout.

    The following command line options are supported:

    mode
    Select a new video mode. The modes currently recognized are: 80x25 80x30 80x43 80x50 80x60 132x25 132x30 132x43 132x50 132x60 VGA_40x25 VGA_80x25 VGA_80x30 VGA_80x50 VGA_80x60 VGA_90x25 VGA_90x30 VGA_90x43 VGA_90x50 VGA_90x60 EGA_80x25 EGA_80x43 VESA_132x25 VESA_132x43 VESA_132x50 VESA_132x60 The raster text mode VESA_800x600 can also be chosen. Alternatively, a mode can be specified with its number by using a mode name of the form MODE_ Aq NUMBER A list of valid mode numbers can be obtained with the -i mode option. See Sx Video Mode Support below.
    foreground [background ]
    Change colors when displaying text. Specify the foreground color (e.g. ``vidcontrol white )'' or both a foreground and background colors (e.g. ``vidcontrol yellow blue )'' Use the show command below to see available colors.
    show
    See the supported colors on a given platform.
    -b color
    Set border color to color This option may not be always supported by the video driver.
    -C
    Clear the history buffer.
    -c normal | blink | destructive
    Change the cursor appearance. The cursor is either an inverting block (normal ) that can optionally blink or it can be like the old hardware cursor (destructive ) The latter is actually a simulation.
    -d
    Print out current output screen map.
    -f [size ] file
    Load font file for size (currently, only 8x8 8x14 or 8x16 ) The font file can be either uuencoded or in raw binary format. You can also use the menu-driven vidfont(1) command to load the font of your choice.

    Size may be omitted, in this case will try to guess it from the size of font file.

    Note that older video cards, such as MDA and CGA, do not support software font. See also Sx Video Mode Support and Sx EXAMPLES below and the man page for syscons(4).

    -g geometry
    Set the geometry of the text mode for the modes with selectable geometry. Currently only raster modes, such as VESA_800x600 support this option. See also Sx Video Mode Support and Sx EXAMPLES below.
    -h size
    Set the size of the history (scrollback) buffer to size lines.
    -i adapter
    Shows info about the current video adapter.
    -i mode
    Shows the possible video modes with the current video hardware.
    -l screen_map
    Install screen output map file from screen_map See also syscons(4).
    -L
    Install default screen output map.
    -M char
    Sets the base character used to render the mouse pointer to char
    -m on | off
    Switch the mouse pointer on or off Used together with the moused(8) daemon for text mode cut & paste functionality.
    -p
    Capture the current contents of the video buffer corresponding to the terminal device referred to by standard input. The utility writes contents of the video buffer to the standard output in a raw binary format. For details about that format see Sx Format of Video Buffer Dump below.
    -P
    Same as -p but dump contents of the video buffer in a plain text format ignoring nonprintable characters and information about text attributes.
    -H
    When used with -p or -P it instructs to dump full history buffer instead of visible portion of the video buffer only.
    -r foreground background
    Change reverse mode colors to foreground and background
    -S on | off
    Turn vty switching on or off. When vty switching is off, attempts to switch to a different virtual terminal will fail. (The default is to permit vty switching.) This protection can be easily bypassed when the kernel is compiled with the DDB option. However, you probably should not compile the kernel debugger on a box which is supposed to be physically secure.
    -s number
    Set the current vty to number
    -t N | off
    Set the screensaver timeout to N seconds, or turns it off
    -x
    Use hexadecimal digits for output.

     

    Video Mode Support

    Note that not all modes listed above may be supported by the video hardware. You can verify which mode is supported by the video hardware, using the -i mode option.

    The VESA BIOS support must be linked to the kernel or loaded as a KLD module if you wish to use VESA video modes or 132 column modes (see vga(4)).

    You need to compile your kernel with the VGA_WIDTH90 option if you wish to use VGA 90 column modes (see vga(4)).

    Video modes other than 25 and 30 line modes may require specific size of font. Use -f option above to load a font file to the kernel. If the required size of font has not been loaded to the kernel, will fail if the user attempts to set a new video mode.

    Modes Ta Font size 25 line modes Ta 8x16 (VGA), 8x14 (EGA) 30 line modes Ta 8x16 43 line modes Ta 8x8 50 line modes Ta 8x8 60 line modes Ta 8x8

    It is better to always load all three sizes (8x8, 8x14 and 8x16) of the same font.

    You may set variables in /etc/rc.conf or /etc/rc.conf.local so that desired font files will be automatically loaded when the system starts up. See below.

    If you want to use any of the raster text modes you need to recompile your kernel with the SC_PIXEL_MODE option. See syscons(4) for more details on this kernel option.  

    Format of Video Buffer Dump

    The utility uses the syscons(4) CONS_SCRSHOT ioctl(2) to capture the current contents of the video buffer. The utility writes version and additional information to the standard output, followed by the contents of the video buffer.

    VGA video memory is typically arranged in two byte tuples, one per character position. In each tuple, the first byte will be the character code, and the second byte is the character's color attribute.

    The VGA color attribute byte looks like this:

    bits#         width   meaning 7    <X0000000>      1       character blinking 6:4       <0XXX0000>3background color 3<0000X000>1bright foreground color 2:0<00000XXX>3foreground color

    Here is a list of the three bit wide base colors:

    0
    Black
    1
    Blue
    2
    Green
    3
    Cyan
    4
    Red
    5
    Magenta
    6
    Brown
    7
    Light Grey

    Base colors with bit 3 (the bright foreground flag) set:

    0
    Dark Grey
    1
    Light Blue
    2
    Light Green
    3
    Light Cyan
    4
    Light Red
    5
    Light Magenta
    6
    Yellow
    7
    White

    For example, the two bytes

    "65 158"

    specify an uppercase A (character code 65), blinking (bit 7 set) in yellow (bits 3:0) on a blue background (bits 6:4).

    The output contains a small header which includes additional information which may be useful to utilities processing the output.

    The first 10 bytes are always arranged as follows:

    Byte Range    Contents
    "1 thru 8  Literal text" ``SCRSHOT_ ''
    "9  File format version number"
    "10Remaining number of bytes in the header"

    Subsequent bytes depend on the version number.

    Version       Byte    Meaning
    "1  11      Terminal width, in characters"
    "       12      Terminal depth, in characters"
    "13 and upThe snapshot data"

    So a dump of an 80x25 screen would start (in hex)

    53 43 52 53 48 4f 54 5f 01 02 50 19
    ----------------------- -- -- -- --
              |              |  |  |  ` 25 decimal
              |              |  |  `--- 80 decimal
              |              |  `------ 2 remaining bytes of header data
              |              `--------- File format version 1
              `------------------------ Literal "SCRSHOT_"
    
     

    VIDEO OUTPUT CONFIGURATION

     

    Boot Time Configuration

    You may set the following variables in /etc/rc.conf or /etc/rc.conf.local in order to configure the video output at boot time.

    blanktime
    Sets the timeout value for the -t option.
    font8x16 , font8x14 , font8x8
    Specifies font files for the -f option.
    scrnmap
    Specifies a screen output map file for the -l option.

    See rc.conf5 for more details.  

    Driver Configuration

    The video card driver may let you change default configuration options, such as the default font, so that you do not need to set up the options at boot time. See video card driver manuals, (e.g. vga(4)) for details.  

    FILES

    /usr/share/syscons/fonts/*
    font files.
    /usr/share/syscons/scrnmaps/*
    screen output map files.

     

    EXAMPLES

    If you want to load /usr/share/syscons/fonts/iso-8x16.fnt to the kernel, run as:

    vidcontrol -f 8x16 /usr/share/syscons/fonts/iso-8x16.fnt

    So long as the font file is in /usr/share/syscons/fonts you may abbreviate the file name as iso-8x16

    vidcontrol -f 8x16 iso-8x16

    Furthermore, you can also omit font size ``8x16 ''

    vidcontrol -f iso-8x16

    Moreover, the suffix specifying the font size can be also omitted; in this case, will use the size of the currently displayed font to construct the suffix:

    vidcontrol -f iso

    Likewise, you can also abbreviate the screen output map file name for the -l option if the file is found in /usr/share/syscons/scrnmaps

    vidcontrol -l iso-8859-1_to_cp437

    The above command will load /usr/share/syscons/scrnmaps/iso-8859-1_to_cp437.scm

    The following command will set-up a 100x37 raster text mode (useful for some LCD models):

    vidcontrol -g 100x37 VESA_800x600

    The following command will capture the contents of the first virtual terminal video buffer, and redirect the output to the shot.scr file:

    vidcontrol -p < /dev/ttyv0 > shot.scr

    The following command will dump contents of the fourth virtual terminal video buffer to the standard output in the human readable format:

    vidcontrol -P < /dev/ttyv3
     

    SEE ALSO

    kbdcontrol(1), vidfont(1), keyboard(4), screen(4), syscons(4), vga(4), rc.conf5, kldload(8), moused(8), watch(8)

    The various scr2* utilities in the graphics and textproc categories of the Ports Collection  

    AUTHORS

    An S/oren Schmidt Aq sos@FreeBSD.org An Sascha Wildner  

    CONTRIBUTORS

    An Maxim Sobolev Aq sobomax@FreeBSD.org , An Nik Clayton Aq nik@FreeBSD.org


     

    Index

    NAME
    SYNOPSIS
    DESCRIPTION
    Video Mode Support
    Format of Video Buffer Dump
    VIDEO OUTPUT CONFIGURATION
    Boot Time Configuration
    Driver Configuration
    FILES
    EXAMPLES
    SEE ALSO
    AUTHORS
    CONTRIBUTORS


    Поиск по тексту MAN-ов: 




    Спонсоры:
    PostgresPro
    Inferno Solutions
    Hosting by Hoster.ru
    Хостинг:

    Закладки на сайте
    Проследить за страницей
    Created 1996-2022 by Maxim Chirkov
    Добавить, Поддержать, Вебмастеру