The OpenNET Project / Index page

[ новости /+++ | форум | wiki | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 ТемаНаборКатегория 
 
 [Cписок руководств | Печать]

vboxgetty.conf (5)
  • >> vboxgetty.conf (5) ( Linux man: Форматы файлов )
  •  

    NAME

    vboxgetty.conf - config file for vboxgetty
    

     

    Description

    The file /etc/isdn/vboxgetty.conf is used to configure vboxgetty. Please read the man page vboxgetty(8) for a description of how vboxgetty works.

    Everything after "#" is ignored, as are empty lines. All arguments must be separated by whitespace (spaces, tabs). Arguments may not contain whitespace.

    All settings before the first port command are global settings, after a port command they only affect the current port.

    port <string>
    ISDN device to configure.

    modeminit <string>
    Command to initialize the modem. You should set the MSN/EAZ on which vboxgetty should listen for incoming calls. Default is "ATZ".

    user <string>
    Name of the user that vboxgetty will use. This user must exist in /etc/passwd and you must use this parameter.

    group <string>
    Name of the group that vboxgetty will use. This group must exist in /etc/group and you must use this parameter.

    umask <number>
    Vboxgetty will use this umask when creating new files. You must give the umask as an octal number. Default is 077.

    dropdtrtime <seconds>
    Number of milliseconds to hold the DTR-Line low to reset the modem. Default value is 800.

    initpause <number>
    Number of milliseconds to wait after initializing the modem. This is used to compensate the delay of the "NO CARRIER" response. Default value is 1500.

    badinitsexit <number>
    Maximum failures with modeminit. If this number is reached, vboxgetty exits. Default is 0.

    ringtimeout <number>
    Time in seconds to wait for a RING. If no RING is received within this time, no call is taken. Default is 5.

    echotimeout <number>
    Time in seconds to wait for the echo from the modem. Default is 4.

    commandtimeout <number>
    Time in seconds to wait for a response to a modem command. Default is 4.

    alivetimeout <number>
    After this time in seconds vboxgetty will check if the modem is still responding to modem commands. Default is 1800.

    compression <string>
    Audio compression to use to record new messages. Possible values are ADPCM-2, ADPCM-3, ADPCM-4 and ULAW. The ALAW compression mode is no longer supported. Default is ULAW.

    spooldir <string>
    Spool directory to use. This directory must exist. It's used for control files of several programs. Default is /var/spool/vbox/<user>.

    vboxconfig <string>
    Full path of the vbox config file. Default value is <spooldir>/vbox.conf.

    freespace <number>
    Number of bytes that must be available on the partition with the spool directory, so that a call may be taken. Default is 0.

     

    FILES

    /etc/isdn/vboxgetty.conf
    this configuration file

     

    SEE ALSO

    vboxgetty(8), vbox(5), vboxtcl(5)

     

    AUTHOR

    This manual page was written by Andreas Jellinghaus <aj@dungeon.inka.de>, for Debian GNU/Linux and isdn4linux.


     

    Index

    NAME
    Description
    FILES
    SEE ALSO
    AUTHOR


    Поиск по тексту MAN-ов: 




    Спонсоры:
    PostgresPro
    Inferno Solutions
    Hosting by Hoster.ru
    Хостинг:

    Закладки на сайте
    Проследить за страницей
    Created 1996-2022 by Maxim Chirkov
    Добавить, Поддержать, Вебмастеру