The OpenNET Project / Index page

[ новости /+++ | форум | wiki | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 ТемаНаборКатегория 
 
 [Cписок руководств | Печать]

ulpt (4)
  • >> ulpt (4) ( FreeBSD man: Специальные файлы /dev/* )

  • BSD mandoc
     

    NAME

    
    
    ulpt
    
     - USB printer support
    
     
    

    SYNOPSIS

    To compile this driver into the kernel, place the following line in your kernel configuration file:
    device ulpt

    Alternatively, to load the driver as a module at boot time, place the following line in loader.conf5:

    ulpt_load="YES"
    
     

    DESCRIPTION

    The driver provides support for USB printers that follow the printer bi- or uni-directional protocol. The bits in the minor number select various features of the driver.

    Minor Bit     Function 64   Do not initialize (reset) the device on the port.

    Some printers cannot handle the reset on open; in case of problems try the unlpt device.  

    HARDWARE

    The driver provides support for USB printers and parallel printer conversion cables, including the following:

     

    FILES

    /dev/ulpt?
    device with reset
    /dev/unlpt?
    device without reset

     

    SEE ALSO

    lpt(4), usb(4)  

    HISTORY

    The driver appeared in Nx 1.4 . This manual page was adopted from Nx by An Tom Rhodes Aq trhodes@FreeBSD.org in April 2002.


     

    Index

    NAME
    SYNOPSIS
    DESCRIPTION
    HARDWARE
    FILES
    SEE ALSO
    HISTORY


    Поиск по тексту MAN-ов: 




    Спонсоры:
    PostgresPro
    Inferno Solutions
    Hosting by Hoster.ru
    Хостинг:

    Закладки на сайте
    Проследить за страницей
    Created 1996-2022 by Maxim Chirkov
    Добавить, Поддержать, Вебмастеру