The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 [Cписок руководств | Печать]

terminfo (4)
  • >> terminfo (4) ( Solaris man: Специальные файлы /dev/* )
  • terminfo (5) ( Solaris man: Форматы файлов )
  • terminfo (5) ( FreeBSD man: Форматы файлов )
  • terminfo (5) ( Linux man: Форматы файлов )


    terminfo - terminal and printer capability database





    The terminfo database describes the capabilities of devices such as terminals and printers. Devices are described in terminfo source files by specifying a set of capabilities, by quantifying certain aspects of the device, and by specifying character sequences that affect particular results. This database is often used by screen oriented applications such as vi and curses-based programs, as well as by some system commands such as ls and more. This usage allows them to work with a variety of devices without changes to the programs.

    terminfo descriptions are located in the directory pointed to by the environment variable TERMINFO or in /usr/share/lib/terminfo. terminfo descriptions are generated by tic(1M).

    terminfo source files consist of one or more device descriptions. Each description consists of a header (beginning in column 1) and one or more lines that list the features for that particular device. Every line in a terminfo source file must end in a comma (,). Every line in a terminfo source file except the header must be indented with one or more white spaces (either spaces or tabs).

    Entries in terminfo source files consist of a number of comma-separated fields. White space after each comma is ignored. Embedded commas must be escaped by using a backslash. Each device entry has the following format:

    alias1 | alias2 | ... | aliasn | fullname,
            capability1, capability2,

    The first line, commonly referred to as the header line, must begin in column one and must contain at least two aliases separated by vertical bars. The last field in the header line must be the long name of the device and it may contain any string. Alias names must be unique in the terminfo database and they must conform to system file naming conventions. See tic(1M). They cannot, for example, contain white space or slashes.

    Every device must be assigned a name, such as "vt100". Device names (except the long name) should be chosen using the following conventions. The name should not contain hyphens because hyphens are reserved for use when adding suffixes that indicate special modes.

    These special modes may be modes that the hardware can be in, or user preferences. To assign a special mode to a particular device, append a suffix consisting of a hyphen and an indicator of the mode to the device name. For example, the -w suffix means "wide mode". When specified, it allows for a width of 132 columns instead of the standard 80 columns. Therefore, if you want to use a "vt100" device set to wide mode, name the device "vt100-w". Use the following suffixes where possible.

    -wWide mode (more than 80 columns)5410-w

    The terminfo reference manual page is organized in two sections:



    Capabilities in terminfo are of three types: Boolean capabilities (which show that a device has or does not have a particular feature), numeric capabilities (which quantify particular features of a device), and string capabilities (which provide sequences that can be used to perform particular operations on devices).

    In the following table, a Variable is the name by which a C programmer accesses a capability (at the terminfo level). A Capname is the short name for a capability specified in the terminfo source file. It is used by a person updating the source file and by the tput command. A Termcap Code is a two-letter sequence that corresponds to the termcap capability name. (Note that termcap is no longer supported.)

    Capability names have no real length limit, but an informal limit of five characters has been adopted to keep them short. Whenever possible, capability names are chosen to be the same as or similar to those specified by the ANSI X3.64-1979 standard. Semantics are also intended to match those of the ANSI standard.

    All string capabilities listed below may have padding specified, with the exception of those used for input. Input capabilities, listed under the Strings section in the following tables, have names beginning with key_. The #i symbol in the description field of the following tables refers to the ith parameter.  


                             Cap-   Termcap
    Variable                  name   Code     Description
    auto_left_margin          bw     bw       cub1 wraps from column 0 to
                                             last column
    auto_right_margin         am     am       Terminal has automatic margins
    back_color_erase          bce    be       Screen erased with background
    can_change                ccc    cc       Terminal can re-define existing
    ceol_standout_glitch      xhp    xs       Standout not erased by
                                             overwriting (hp)
    col_addr_glitch           xhpa   YA       Only positive motion
                                             for hpa/mhpa caps
    cpi_changes_res           cpix   YF       Changing character pitch
                                             changes resolution
    cr_cancels_micro_mode     crxm   YB       Using cr turns off micro mode
    dest_tabs_magic_smso      xt     xt       Destructive tabs, magic
                                             smso char (t1061)
    eat_newline_glitch        xenl   xn       Newline ignored after
                                             80 columns (Concept)
    erase_overstrike          eo     eo       Can erase overstrikes with a
    generic_type              gn     gn       Generic line type
                                             (for example, dialup, switch)
    hard_copy                 hc     hc       Hardcopy terminal
    hard_cursor               chts   HC       Cursor is hard to see
    has_meta_key              km     km       Has a meta key (shift,
                                             sets parity bit)
    has_print_wheel           daisy  YC       Printer needs operator
                                             to change character set
    has_status_line           hs     hs       Has extra "status line"
    hue_lightness_saturation  hls    hl       Terminal uses only HLS
                                             color notation (Tektronix)
    insert_null_glitch        in     in       Insert mode distinguishes nulls
    lpi_changes_res           lpix   YG       Changing line pitch
                                             changes resolution
    memory_above              da     da       Display may be retained
                                             above the screen
    memory_below              db     db       Display may be retained
                                             below the screen
    move_insert_mode          mir    mi       Safe to move while in insert
    move_standout_mode        msgr   ms       Safe to move in standout modes
    needs_xon_xoff            nxon   nx       Padding won't work,
                                             xon/xoff required
    no_esc_ctlc               xsb    xb       Beehive (f1=escape, f2=ctrl C)
    no_pad_char               npc    NP       Pad character doesn't exist
    non_dest_scroll_region    ndscr  ND       Scrolling region
                                             is nondestructive
    non_rev_rmcup             nrrmc  NR       smcup does not reverse rmcup
    over_strike               os     os       Terminal overstrikes
                                             on hard-copy terminal
    prtr_silent               mc5i   5i       Printer won't echo on screen
    row_addr_glitch           xvpa   YD       Only positive motion
                                             for vpa/mvpa caps
    semi_auto_right_margin    sam    YE       Printing in last column causes
    status_line_esc_ok        eslok  es       Escape can be used on
                                             the status line
    tilde_glitch              hz     hz       Hazeltine; can't print tilde (~)
    transparent_underline     ul     ul       Underline character overstrikes
    xon_xoff                  xon    xo       Terminal uses xon/xoff 



                         Cap-    Termcap
    Variable              name    Code     Description
    bit_image_entwining   bitwin  Yo       Number of passes for each
                                          bit-map row
    bit_image_type        bitype  Yp       Type of bit image device
    buffer_capacity       bufsz   Ya       Number of bytes buffered
                                          before printing
    buttons               btns    BT       Number of buttons on the mouse
    columns               cols    co       Number of columns in a line
    dot_horz_spacing      spinh   Yc       Spacing of dots horizontally
                                          in dots per inch
    dot_vert_spacing      spinv   Yb       Spacing of pins vertically
                                          in pins per inch
    init_tabs             it      it       Tabs initially every # spaces
    label_height          lh      lh       Number of rows in each label
    label_width           lw      lw       Number of columns in each label
    lines                 lines   li       Number of lines on a screen or
                                          a page
    lines_of_memory       lm      lm       Lines of memory if > lines;
                                          0 means varies
    max_attributes        ma      ma       Maximum combined video attributes
                                          terminal can display
    magic_cookie_glitch   xmc     sg       Number of blank characters
                                          left by smso or rmso
    max_colors            colors  Co       Maximum number of colors
                                          on the screen
    max_micro_address     maddr   Yd       Maximum value in
    max_micro_jump        mjump   Ye       Maximum value in parm_..._micro
    max_pairs             pairs   pa       Maximum number of
                                          color-pairs on the screen
    maximum_windows       Wnum    MW       Maximum number of definable windows
    micro_char_size       mcs     Yf       Character step size when
                                          in micro mode
    micro_line_size       mls     Yg       Line step size when in micro mode
    no_color_video        ncv     NC       Video attributes that
                                          can't be used with colors
    num_labels            nlab    Nl       Number of labels on screen
    number_of_pins        npins   Yh       Number of pins in print-head
    output_res_char       orc     Yi       Horizontal resolution in
                                          units per character
    output_res_line       orl     Yj       Vertical resolution in units per
    output_res_horz_inch  orhi    Yk       Horizontal resolution in
                                          units per inch
    output_res_vert_inch  orvi    Yl       Vertical resolution in
                                          units per inch
    padding_baud_rate     pb      pb       Lowest baud rate
    print_rate            cps     Ym       Print rate in characters per second
                                          where padding needed
    virtual_terminal      vt      vt       Virtual terminal number (system)
    wide_char_size        widcs   Yn       Character step size when
                                          in double wide mode
    width_status_line     wsl     ws       Number of columns in status line



                              Cap-   Termcap
    Variable                   name   Code     Description
    acs_chars                  acsc   ac       Graphic charset pairs aAbBcC
    alt_scancode_esc           scesa  S8       Alternate escape for
                                              scancode emulation
                                              (default is for vt100)
    back_tab                   cbt    bt       Back tab
    bell                       bel    bl       Audible signal (bell)
    bit_image_carriage_return  bicr   Yv       Move to beginning of
                                              same row (use tparm)
    bit_image_newline          binel  Zz       Move to next row of
                                              the bit image (use tparm)
    bit_image_repeat           birep  Zy       Repeat bit-image cell
                                              #1 #2 times (use tparm)
    carriage_return            cr     cr       Carriage return
    change_char_pitch          cpi    ZA       Change number of
                                              characters per inch
    change_line_pitch          lpi    ZB       Change number of lines per inch
    change_res_horz            chr    ZC       Change horizontal resolution
    change_res_vert            cvr    ZD       Change vertical resolution
    change_scroll_region       csr    cs       Change to lines #1
                                              through #2 (vt100)
    char_padding               rmp    rP       Like ip but when in replace
    char_set_names             csnm   Zy       List of character set names
    clear_all_tabs             tbc    ct       Clear all tab stops
    clear_margins              mgc    MC       Clear all margins
                                              (top, bottom, and sides)
    clear_screen               clear  cl       Clear screen and home cursor
    clr_bol                    el1    cb       Clear to beginning of
                                              line, inclusive
    clr_eol                    el     ce       Clear to end of line
    clr_eos                    ed     cd       Clear to end of display
    code_set_init              csin   ci       Init sequence
                                              for multiple codesets
    color_names                colornm  Yw     Give name for color #1
    column_address             hpa    ch       Horizontal position
    command_character          cmdch  CC       Terminal settable cmd
                                              character in prototype
    create_window              cwin   CW       Define win #1 to go
                                              from #2,#3to #4,#5
    cursor_address             cup    cm       Move to row #1 col #2
    cursor_down                cud1   do       Down one line
    cursor_home                home   ho       Home cursor (if no cup)
    cursor_invisible           civis  vi       Make cursor invisible
    cursor_left                cub1   le       Move left one space.
    cursor_mem_address         mrcup  CM       Memory relative cursor
    cursor_normal              cnorm  ve       Make cursor appear
                                              normal (undo vs/vi)
    cursor_right               cuf1   nd       Non-destructive space
                                              (cursor or carriage right)
    cursor_to_ll               ll     ll       Last line, first
                                              column (if no cup)
    cursor_up                  cuu1   up       Upline (cursor up)
    cursor_visible             cvvis  vs       Make cursor very visible
    define_bit_image_region    defbi  Yx       Define rectangular bit-
                                              image region (use tparm)
    define_char                defc   ZE       Define a character in
                                              a character set
    delete_character           dch1   dc       Delete character
    delete_line                dl1    dl       Delete line
    device_type                devt   dv       Indicate language/
                                              codeset support
    dial_phone                 dial   DI       Dial phone number #1
    dis_status_line            dsl    ds       Disable status line
    display_clock              dclk   DK       Display time-of-day clock
    display_pc_char            dispc  S1       Display PC character
    down_half_line             hd     hd       Half-line down (forward
                                              1/2 linefeed)
    ena_acs                    enacs  eA       Enable alternate character set
    end_bit_image_region       endbi  Yy       End a bit-image region
                                              (use tparm)
    enter_alt_charset_mode     smacs  as       Start alternate character set
    enter_am_mode              smam   SA       Turn on automatic margins
    enter_blink_mode           blink  mb       Turn on blinking
    enter_bold_mode            bold   md       Turn on bold (extra
                                              bright) mode
    enter_ca_mode              smcup  ti       String to begin programs
                                              that use cup
    enter_delete_mode          smdc   dm       Delete mode (enter)
    enter_dim_mode             dim    mh       Turn on half-bright mode
    enter_doublewide_mode      swidm  ZF       Enable double wide printing
    enter_draft_quality        sdrfq  ZG       Set draft quality print mode
    enter_insert_mode          smir   im       Insert mode (enter)
    enter_italics_mode         sitm   ZH       Enable italics
    enter_leftward_mode        slm    ZI       Enable leftward carriage
    enter_micro_mode           smicm  ZJ       Enable micro motion
    enter_near_letter_quality  snlq   ZK       Set near-letter quality print
    enter_normal_quality       snrmq  ZL       Set normal quality
    enter_pc_charset_mode      smpch  S2       Enter PC character display mode
    enter_protected_mode       prot   mp       Turn on protected mode
    enter_reverse_mode         rev    mr       Turn on reverse video mode
    enter_scancode_mode        smsc   S4       Enter PC scancode mode
    enter_scancode_mode        smsc   S4       Enter PC scancode mode
    enter_secure_mode          invis  mk       Turn on blank mode
                                              (characters invisible)
    enter_shadow_mode          sshm   ZM       Enable shadow printing
    enter_standout_mode        smso   so       Begin standout mode
    enter_subscript_mode       ssubm  ZN       Enable subscript printing
    enter_superscript_mode     ssupm  ZO       Enable superscript printing
    enter_underline_mode       smul   us       Start underscore mode
    enter_upward_mode          sum    ZP       Enable upward carriage motion
    enter_xon_mode             smxon  SX       Turn on xon/xoff handshaking
    erase_chars                ech    ec       Erase #1 characters
    exit_alt_charset_mode      rmacs  ae       End alternate character set
    exit_am_mode               rmam   RA       Turn off automatic margins
    exit_attribute_mode        sgr0   me       Turn off all attributes
    exit_ca_mode               rmcup  te       String to end programs
                                              that use cup
    exit_delete_mode           rmdc   ed       End delete mode
    exit_doublewide_mode       rwidm  ZQ       Disable double wide printing
    exit_insert_mode           rmir   ei       End insert mode
    exit_italics_mode          ritm   ZR       Disable italics
    exit_leftward_mode         rlm    ZS       Enable rightward (normal)
                                              carriage motion
    exit_micro_mode            rmicm  ZT       Disable micro motion
    exit_pc_charset_mode       rmpch  S3       Disable PC character
                                              display mode
    exit_scancode_mode         rmsc   S5       Disable PC scancode mode
    exit_shadow_mode           rshm   ZU       Disable shadow printing
    exit_standout_mode         rmso   se       End standout mode
    exit_subscript_mode        rsubm  ZV       Disable subscript printing
    exit_superscript_mode      rsupm  ZW       Disable superscript printing
    exit_underline_mode        rmul   ue       End underscore mode
    exit_upward_mode           rum    ZX       Enable downward (normal)
                                              carriage motion
    exit_xon_mode              rmxon  RX       Turn off xon/xoff handshaking
    fixed_pause                pause  PA       Pause for 2-3 seconds
    flash_hook                 hook   fh       Flash the switch hook
    flash_screen               flash  vb       Visible bell (may
                                              not move cursor)
    form_feed                  ff     ff       Hardcopy terminal page eject
    from_status_line           fsl    fs       Return from status line
    get_mouse                  getm   Gm       Curses should get button events
    goto_window                wingo  WG       Go to window #1
    hangup                     hup    HU       Hang-up phone
    init_1string               is1    i1       Terminal or printer
                                              initialization string
    init_2string               is2    is       Terminal or printer
                                              initialization string
    init_3string               is3    i3       Terminal or printer
                                              initialization string
    init_file                  if     if       Name of initialization file
    init_prog                  iprog  iP       Path name of program
                                              for initialization
    initialize_color           initc  Ic       Initialize the
                                              definition of color
    initialize_pair            initp  Ip       Initialize color-pair
    insert_character           ich1   ic       Insert character
    insert_line                il1    al       Add new blank line
    insert_padding             ip     ip       Insert pad after
                                              character inserted



    The ``key_'' strings are sent by specific keys. The ``key_'' descriptions include the macro, defined in <curses.h>, for the code returned by the curses routine getch when the key is pressed (see curs_getch(3CURSES)).

                           Cap-    Termcap
    Variable                name    Code     Description
    key_a1                  ka1     K1       KEY_A1, upper left of keypad
    key_a3                  ka3     K3       KEY_A3, upper right of keypad
    key_b2                  kb2     K2       KEY_B2, center of keypad
    key_backspace           kbs     kb       KEY_BACKSPACE, sent by
                                            backspace key
    key_beg                 kbeg    @1       KEY_BEG, sent by beg(inning) key
    key_btab                kcbt    kB       KEY_BTAB, sent by back-tab key
    key_c1                  kc1     K4       KEY_C1, lower left of keypad
    key_c3                  kc3     K5       KEY_C3, lower right of keypad
    key_cancel              kcan    @2       KEY_CANCEL, sent by cancel key
    key_catab               ktbc    ka       KEY_CATAB, sent by
                                            clear-all-tabs key
    key_clear               kclr    kC       KEY_CLEAR, sent by
                                            clear-screen or erase key
    key_close               kclo    @3       KEY_CLOSE, sent by close key
    key_command             kcmd    @4       KEY_COMMAND, sent by
                                            cmd (command) key
    key_copy                kcpy    @5       KEY_COPY, sent by copy key
    key_create              kcrt    @6       KEY_CREATE, sent by create key
    key_ctab                kctab   kt       KEY_CTAB, sent by clear-tab key
    key_dc                  kdch1   kD       KEY_DC, sent by delete-character
    key_dl                  kdl1    kL       KEY_DL, sent by delete-line key
    key_down                kcud1   kd       KEY_DOWN, sent by terminal
                                            down-arrow key
    key_eic                 krmir   kM       KEY_EIC, sent by rmir or smir in
                                            insert mode
    key_end                 kend    @7       KEY_END, sent by end key
    key_enter               kent    @8       KEY_ENTER, sent by enter/send
    key_eol                 kel     kE       KEY_EOL, sent by
                                            clear-to-end-of-line key
    key_eos                 ked     kS       KEY_EOS, sent by
                                            clear-to-end-of-screen key
    key_exit                kext    @9       KEY_EXIT, sent by exit key
    key_f0                  kf0     k0       KEY_F(0), sent by function key f0
    key_f1                  kf1     k1       KEY_F(1), sent by function key f1
    key_f2                  kf2     k2       KEY_F(2), sent by function key f2
    key_f3                  kf3     k3       KEY_F(3), sent by function key f3
    key_fB                  kf4     k4       KEY_F(4), sent by function key fB
    key_f5                  kf5     k5       KEY_F(5), sent by function key f5
    key_f6                  kf6     k6       KEY_F(6), sent by function key f6
    key_f7                  kf7     k7       KEY_F(7), sent by function key f7
    key_f8                  kf8     k8       KEY_F(8), sent by function key f8
    key_f9                  kf9     k9       KEY_F(9), sent by function key f9
    key_f10                 kf10    k;       KEY_F(10), sent by function key
    key_f11                 kf11    F1       KEY_F(11), sent by function key 
    key_f12                 kf12    F2       KEY_F(12), sent by function key 
    key_f13                 kf13    F3       KEY_F(13), sent by function key
    key_f14                 kf14    F4       KEY_F(14), sent by function key
    key_f15                 kf15    F5       KEY_F(15), sent by function key
    key_f16                 kf16    F6       KEY_F(16), sent by function key
    key_f17                 kf17    F7       KEY_F(17), sent by function key
    key_f18                 kf18    F8       KEY_F(18), sent by function key
    key_f19                 kf19    F9       KEY_F(19), sent by function key
    key_f20                 kf20    FA       KEY_F(20), sent by function key
    key_f21                 kf21    FB       KEY_F(21), sent by function key
    key_f22                 kf22    FC       KEY_F(22), sent by function key 
    key_f23                 kf23    FD       KEY_F(23), sent by function key
    key_f24                 kf24    FE       KEY_F(24), sent by function key
    key_f25                 kf25    FF       KEY_F(25), sent by function key
    key_f26                 kf26    FG       KEY_F(26), sent by function key
    key_f27                 kf27    FH       KEY_F(27), sent by function key
    key_f28                 kf28    FI       KEY_F(28), sent by function key
    key_f29                 kf29    FJ       KEY_F(29), sent by function key
    key_f30                 kf30    FK       KEY_F(30), sent by function key
    key_f31                 kf31    FL       KEY_F(31), sent by function key
    key_f32                 kf32    FM       KEY_F(32), sent by function key
    key_f33                 kf33    FN       KEY_F(13), sent by function key
    key_f34                 kf34    FO       KEY_F(34), sent by function key
    key_f35                 kf35    FP       KEY_F(35), sent by function key
    key_f36                 kf36    FQ       KEY_F(36), sent by function key
    key_f37                 kf37    FR       KEY_F(37), sent by function key
    key_f38                 kf38    FS       KEY_F(38), sent by function key
    key_f39                 kf39    FT       KEY_F(39), sent by function key
    key_fB0                 kf40    FU       KEY_F(40), sent by function key
    key_fB1                 kf41    FV       KEY_F(41), sent by function key
    key_fB2                 kf42    FW       KEY_F(42), sent by function key
    key_fB3                 kf43    FX       KEY_F(43), sent by function key
    key_fB4                 kf44    FY       KEY_F(44), sent by function key
    key_fB5                 kf45    FZ       KEY_F(45), sent by function key
    key_fB6                 kf46    Fa       KEY_F(46), sent by function key
    key_fB7                 kf47    Fb       KEY_F(47), sent by function key
    key_fB8                 kf48    Fc       KEY_F(48), sent by function key
    key_fB9                 kf49    Fd       KEY_F(49), sent by function key
    key_f50                 kf50    Fe       KEY_F(50), sent by function key
    key_f51                 kf51    Ff       KEY_F(51), sent by function key
    key_f52                 kf52    Fg       KEY_F(52), sent by function key
    key_f53                 kf53    Fh       KEY_F(53), sent by function key
    key_f54                 kf54    Fi       KEY_F(54), sent by function key
    key_f55                 kf55    Fj       KEY_F(55), sent by function key
    key_f56                 kf56    Fk       KEY_F(56), sent by function key
    key_f57                 kf57    Fl       KEY_F(57), sent by function key
    key_f58                 kf58    Fm       KEY_F(58), sent by function key
    key_f59                 kf59    Fn       KEY_F(59), sent by function key
    key_f60                 kf60    Fo       KEY_F(60), sent by function key
    key_f61                 kf61    Fp       KEY_F(61), sent by function key
    key_f62                 kf62    Fq       KEY_F(62), sent by function key
    key_f63                 kf63    Fr       KEY_F(63), sent by function key
    key_find                kfnd    @0       KEY_FIND, sent by find key
    key_help                khlp    %1       KEY_HELP, sent by help key
    key_home                khome   kh       KEY_HOME, sent by home key
    key_ic                  kich1   kI       KEY_IC, sent by ins-char/enter
                                            ins-mode key
    key_il                  kil1    kA       KEY_IL, sent by insert-line key
    key_left                kcub1   kl       KEY_LEFT, sent by
                                            terminal left-arrow key
    key_ll                  kll     kH       KEY_LL, sent by home-down key
    key_mark                kmrk    %2       KEY_MARK, sent by
    key_message             kmsg    %3       KEY_MESSAGE, sent by message key
    key_mouse               kmous   Km       0631, Mouse event has occured
    key_move                kmov    %4       KEY_MOVE, sent by move key
    key_next                knxt    %5       KEY_NEXT, sent by next-object
    key_npage               knp     kN       KEY_NPAGE, sent by next-page
    key_open                kopn    %6       KEY_OPEN, sent by open key
    key_options             kopt    %7       KEY_OPTIONS, sent by options
    key_ppage               kpp     kP       KEY_PPAGE, sent by
                                            previous-page key
    key_previous            kprv    %8       KEY_PREVIOUS, sent by
                                            previous-object key
    key_print               kprt    %9       KEY_PRINT, sent by
                                            print or copy key
    key_redo                krdo    %0       KEY_REDO, sent by redo key
    key_reference           kref    &1       KEY_REFERENCE, sent by
                                            reference key
    key_refresh             krfr    &2       KEY_REFRESH, sent by
                                            refresh key
    key_replace             krpl    &3       KEY_REPLACE, sent by
                                            replace key
    key_restart             krst    &4       KEY_RESTART, sent by
                                            restart key
    key_resume              kres    &5       KEY_RESUME, sent by resume key
    key_right               kcuf1   kr       KEY_RIGHT, sent by terminal
                                            right-arrow key
    key_save                ksav    &6       KEY_SAVE, sent by save key
    key_sbeg                kBEG    &9       KEY_SBEG, sent by
                                            shifted beginning key
    key_scancel             kCAN    &0       KEY_SCANCEL, sent by
                                            shifted cancel key
    key_scommand            kCMD    *1       KEY_SCOMMAND, sent by
                                            shifted command key
    key_scopy               kCPY    *2       KEY_SCOPY, sent by
                                            shifted copy key
    key_screate             kCRT    *3       KEY_SCREATE, sent by
                                            shifted create key
    key_sdc                 kDC     *4       KEY_SDC, sent by
                                            shifted delete-char key
    key_sdl                 kDL     *5       KEY_SDL, sent by
                                            shifted delete-line key
    key_select              kslt    *6       KEY_SELECT, sent by
                                            select key
    key_send                kEND    *7       KEY_SEND, sent by
                                            shifted end key
    key_seol                kEOL    *8       KEY_SEOL, sent by
                                            shifted clear-line key
    key_sexit               kEXT    *9       KEY_SEXIT, sent by
                                            shifted exit key
    key_sf                  kind    kF       KEY_SF, sent by
                                            scroll-forward/down key
    key_sfind               kFND    *0       KEY_SFIND, sent by
                                            shifted find key
    key_shelp               kHLP    #1       KEY_SHELP, sent by
                                            shifted help key
    key_shome               kHOM    #2       KEY_SHOME, sent by
                                            shifted home key
    key_sic                 kIC     #3       KEY_SIC, sent by
                                            shifted input key
    key_sleft               kLFT    #4       KEY_SLEFT, sent by
                                            shifted left-arrow key
    key_smessage            kMSG    %a       KEY_SMESSAGE, sent by
                                            shifted message key
    key_smove               kMOV    %b       KEY_SMOVE, sent by
                                            shifted move key
    key_snext               kNXT    %c       KEY_SNEXT, sent by
                                            shifted next key
    key_soptions            kOPT    %d       KEY_SOPTIONS, sent by
                                            shifted options key
    key_sprevious           kPRV    %e       KEY_SPREVIOUS, sent by
                                            shifted prev key
    key_sprint              kPRT    %f       KEY_SPRINT, sent by
                                            shifted print key
    key_sr                  kri     kR       KEY_SR, sent by
                                            scroll-backward/up key
    key_sredo               kRDO    %g       KEY_SREDO, sent by
                                            shifted redo key
    key_sreplace            kRPL    %h       KEY_SREPLACE, sent by
                                            shifted replace key
    key_sright              kRIT    %i       KEY_SRIGHT, sent by shifted
                                            right-arrow key
    key_srsume              kRES    %j       KEY_SRSUME, sent by
                                            shifted resume key
    key_ssave               kSAV    !1       KEY_SSAVE, sent by
                                            shifted save key
    key_ssuspend            kSPD    !2       KEY_SSUSPEND, sent by
                                            shifted suspend key
    key_stab                khts    kT       KEY_STAB, sent by
                                            set-tab key
    key_sundo               kUND    !3       KEY_SUNDO, sent by
                                            shifted undo key
    key_suspend             kspd    &7       KEY_SUSPEND, sent by
                                            suspend key
    key_undo                kund    &8       KEY_UNDO, sent by undo key
    key_up                  kcuu1   ku       KEY_UP, sent by
                                            terminal up-arrow key
    keypad_local            rmkx    ke       Out of
                                            ``keypad-transmit'' mode
    keypad_xmit             smkx    ks       Put terminal in
                                            ``keypad-transmit'' mode
    lab_f0                  lf0     l0       Labels on function key
                                            f0 if not f0
    lab_f1                  lf1     l1       Labels on function key
                                            f1 if not f1
    lab_f2                  lf2     l2       Labels on function key
                                            f2 if not f2
    lab_f3                  lf3     l3       Labels on function key
                                            f3 if not f3
    lab_fB                  lfB     l4       Labels on function key
                                            fB if not fB
    lab_f5                  lf5     l5       Labels on function key
                                            f5 if not f5
    lab_f6                  lf6     l6       Labels on function key
                                            f6 if not f6
    lab_f7                  lf7     l7       Labels on function key
                                            f7 if not f7
    lab_f8                  lf8     l8       Labels on function key
                                            f8 if not f8
    lab_f9                  lf9     l9       Labels on function key
                                            f9 if not f9
    lab_f10                 lf10    la       Labels on function key
                                            f10 if not f10
    label_format            fln     Lf       Label format
    label_off               rmln    LF       Turn off soft labels
    label_on                smln    LO       Turn on soft labels
    meta_off                rmm     mo       Turn off "meta mode"
    meta_on                 smm     mm       Turn on "meta mode" (8th bit)
    micro_column_address    mhpa    ZY       Like column_address
                                            for micro adjustment
    micro_down              mcud1   ZZ       Like cursor_down
                                            for micro adjustment
    micro_left              mcub1   Za       Like cursor_left
                                            for micro adjustment
    micro_right             mcuf1   Zb       Like cursor_right
                                            for micro adjustment
    micro_row_address       mvpa    Zc       Like row_address
                                            for micro adjustment
    micro_up                mcuu1   Zd       Like cursor_up
                                            for micro adjustment
    mouse_info              minfo   Mi       Mouse status information
    newline                 nel     nw       Newline (behaves like
                                            cr followed by lf)
    order_of_pins           porder  Ze       Matches software bits
                                            to print-head pins
    orig_colors             oc      oc       Set all color(-pair)s
                                            to the original ones
    orig_pair               op      op       Set default color-pair
                                            to the original one
    pad_char                pad     pc       Pad character (rather than null)
    parm_dch                dch     DC       Delete #1 chars
    parm_delete_line        dl      DL       Delete #1 lines
    parm_down_cursor        cud     DO       Move down #1 lines
    parm_down_micro         mcud    Zf       Like parm_down_cursor
                                            for micro adjust
    parm_ich                ich     IC       Insert #1 blank chars
    parm_index              indn    SF       Scroll forward #1 lines
    parm_insert_line        il      AL       Add #1 new blank lines
    parm_left_cursor        cub     LE       Move cursor left #1 spaces
    parm_left_micro         mcub    Zg       Like parm_left_cursor
                                            for micro adjust
    parm_right_cursor       cuf     RI       Move right #1 spaces
    parm_right_micro        mcuf    Zh       Like parm_right_cursor
                                            for micro adjust
    parm_rindex             rin     SR       Scroll backward #1 lines
    parm_up_cursor          cuu     UP       Move cursor up #1 lines
    parm_up_micro           mcuu    Zi       Like parm_up_cursor
                                            for micro adjust
    pc_term_options         pctrm   S6       PC terminal options
    pkey_key                pfkey   pk       Prog funct key #1 to
                                            type string #2
    pkey_local              pfloc   pl       Prog funct key #1 to
                                            execute string #2
    pkey_plab               pfxl    xl       Prog key #1 to xmit
                                            string #2 and show string #3
    pkey_xmit               pfx     px       Prog funct key #1 to
                                            xmit string #2
    plab_norm               pln     pn       Prog label #1 to show
                                            string #2
    print_screen            mc0     ps       Print contents of the screen
    prtr_non                mc5p    pO       Turn on the printer for #1 bytes
    prtr_off                mc4     pf       Turn off the printer
    prtr_on                 mc5     po       Turn on the printer
    pulse                   pulse   PU       Select pulse dialing
    quick_dial              qdial   QD       Dial phone number #1, without
                                            progress detection
    remove_clock            rmclk   RC       Remove time-of-day clock
    repeat_char             rep     rp       Repeat char #1 #2 times
    req_for_input           rfi     RF       Send next input char (for ptys)
    req_mouse_pos           reqmp   RQ       Request mouse position report
    reset_1string           rs1     r1       Reset terminal completely to
                                            sane modes
    reset_2string           rs2     r2       Reset terminal completely to
                                            sane modes
    reset_3string           rs3     r3       Reset terminal completely to
                                            sane modes
    reset_file              rf      rf       Name of file containing
                                            reset string
    restore_cursor          rc      rc       Restore cursor to
                                            position of last sc
    row_address             vpa     cv       Vertical position absolute
    save_cursor             sc      sc       Save cursor position
    scancode_escape         scesc   S7       Escape for scancode emulation
    scroll_forward          ind     sf       Scroll text up
    scroll_reverse          ri      sr       Scroll text down
    select_char_set         scs     Zj       Select character set
    set0_des_seq            s0ds    s0       Shift into codeset 0
                                            (EUC set 0, ASCII)
    set1_des_seq            s1ds    s1       Shift into codeset 1
    set2_des_seq            s2ds    s2       Shift into codeset 2
    set3_des_seq            s3ds    s3       Shift into codeset 3
                                            attributes #1-#6
    set_a_background        setab   AB       Set background color
                                            using ANSI escape
    set_a_foreground        setaf   AF       Set foreground color
                                            using ANSI escape
    set_attributes          sgr     sa       Define the video
                                            attributes #1-#9
    set_background          setb    Sb       Set current background color
    set_bottom_margin       smgb    Zk       Set bottom margin at
                                            current line
    set_bottom_margin_parm  smgbp   Zl       Set bottom margin at
                                            line #1 or #2
                                            lines from bottom
    set_clock               sclk    SC       Set time-of-day clock
    set_color_band          setcolor         YzChange to ribbon color #1
    set_color_pair          scp     sp       Set current color-pair
    set_foreground          setf    Sf       Set current foreground color1
    set_left_margin         smgl    ML       Set left margin at current line
    set_left_margin_parm    smglp   Zm       Set left (right) margin
                                            at column #1 (#2)
    set_lr_margin           smglr   ML       Sets both left and right margins
    set_page_length         slines  YZ       Set page length to #1 lines 
                                            (use tparm) of an inch
    set_right_margin        smgr    MR       Set right margin at
                                            current column
    set_right_margin_parm   smgrp   Zn       Set right margin at column #1
    set_tab                 hts     st       Set a tab in all rows,
                                            current column
    set_tb_margin           smgtb   MT       Sets both top and bottom margins
    set_top_margin          smgt    Zo       Set top margin at current line
    set_top_margin_parm     smgtp   Zp       Set top (bottom) margin
                                            at line #1 (#2)
    set_window              wind    wi       Current window is lines
                                            #1-#2 cols #3-#4
    start_bit_image         sbim    Zq       Start printing bit image graphics
    start_char_set_def      scsd    Zr       Start definition of a character
    stop_bit_image          rbim    Zs       End printing bit image graphics
    stop_char_set_def       rcsd    Zt       End definition of a character set
    subscript_characters    subcs   Zu       List of ``subscript-able''
    superscript_characters  supcs   Zv       List of ``superscript-able''
    tab                     ht      ta       Tab to next 8-space hardware tab
    these_cause_cr          docr    Zw       Printing any of these
                                            chars causes cr
    to_status_line          tsl     ts       Go to status line, col #1
    tone                    tone    TO       Select touch tone dialing
    user0                   u0      u0       User string 0
    user1                   u1      u1       User string 1
    user2                   u2      u2       User string 2
    user3                   u3      u3       User string 3
    user4                   u4      u4       User string 4
    user5                   u5      u5       User string 5
    user6                   u6      u6       User string 6
    user7                   u7      u7       User string 7
    user8                   u8      u8       User string 8
    user9                   u9      u9       User string 9
    underline_char          uc      uc       Underscore one char
                                            and move past it
    up_half_line            hu      hu       Half-line up (reverse
                                            1/2 linefeed)
    wait_tone               wait    WA       Wait for dial tone
    xoff_character          xoffc   XF       X-off character
    xon_character           xonc    XN       X-on character
    zero_motion             zerom   Zx       No motion for the
                                            subsequent character


    Sample Entry

    The following entry, which describes the AT&T 610 terminal, is among the more complex entries in the terminfo file as of this writing.

    610|610bct|ATT610|att610|AT&T610;80column;98key keyboard
      am, eslok, hs, mir, msgr, xenl, xon,
      cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
      bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
      civis=\E[?25l, clear=\E[H\E[J, cnorm=\E[?25h\E[?12l,
      cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\b,
      cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
      cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
      cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
      dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
      flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, ht=\t,
      ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED, .ind=\ED$<9>,
      is1=\E[8;0 | \E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)0,
      is2=\E[0m^O, is3=\E(B\E)0, kLFT=\E[\s@, kRIT=\E[\sA,
      kbs=^H, kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B,
      kcuf1=\E[C, kcuu1=\E[A, kf1=\EOc, kf10=\ENp,
      kf11=\ENq, kf12=\ENr, kf13=\ENs, kf14=\ENt, kf2=\EOd,
      kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi,
      kf8=\EOj, kf9=\ENo, khome=\E[H, kind=\E[S, kri=\E[T,
      ll=\E[24H, mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
      pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
      ri=\EM, rmacs=^O, rmir=\E[4l, rmln=\E[2p, rmso=\E[m,
      rmul=\E[m, rs2=\Ec\E[?3l, sc=\E7,
    %?%p3%p1% | %t;7%%?%p7%t;8%m%?%p9%t^N%e^O%,
      sgr0=\E[m^O, smacs=^N, smir=\E[4h, smln=\E[p,
      smso=\E[7m, smul=\E[4m, tsl=\E7\E[25;%i%p1%dx,


    Types of Capabilities in the Sample Entry

    The sample entry shows the formats for the three types of terminfo capabilities listed: Boolean, numeric, and string. All capabilities specified in the terminfo source file must be followed by commas, including the last capability in the source file. In terminfo source files, capabilities are referenced by their capability names (as shown in the previous tables).

    Boolean capabilities are specified simply by their comma separated cap names.

    Numeric capabilities are followed by the character `#' and then a positive integer value. Thus, in the sample, cols (which shows the number of columns available on a device) is assigned the value 80 for the AT&T 610. (Values for numeric capabilities may be specified in decimal, octal, or hexadecimal, using normal C programming language conventions.)

    Finally, string-valued capabilities such as el (clear to end of line sequence) are listed by a two- to five-character capname, an `=', and a string ended by the next occurrence of a comma. A delay in milliseconds may appear anywhere in such a capability, preceded by $ and enclosed in angle brackets, as in el=\EK$<3>. Padding characters are supplied by tput. The delay can be any of the following: a number, a number followed by an asterisk, such as 5*, a number followed by a slash, such as 5/, or a number followed by both, such as 5*/. A `*' shows that the padding required is proportional to the number of lines affected by the operation, and the amount given is the per-affected-unit padding required. (In the case of insert characters, the factor is still the number of lines affected. This is always 1 unless the device has in and the software uses it.) When a `*' is specified, it is sometimes useful to give a delay of the form 3.5 to specify a delay per unit to tenths of milliseconds. (Only one decimal place is allowed.)

    A `/' indicates that the padding is mandatory. If a device has xon defined, the padding information is advisory and will only be used for cost estimates or when the device is in raw mode. Mandatory padding will be transmitted regardless of the setting of xon. If padding (whether advisory or mandatory) is specified for bel or flash, however, it will always be used, regardless of whether xon is specified.

    terminfo offers notation for encoding special characters. Both \E and \e map to an ESCAPE character, ^x maps to a control x for any appropriate x, and the sequences \n, \l, \r, \t, \b, \f, and \s give a newline, linefeed, return, tab, backspace, formfeed, and space, respectively. Other escapes include: \^ for caret (^); \\ for backslash (\); \, for comma (,); \: for colon (:); and \0 for null. (\0 will actually produce \200, which does not terminate a string but behaves as a null character on most devices, providing CS7 is specified. (See stty(1)). Finally, characters may be given as three octal digits after a backslash (for example, \123).

    Sometimes individual capabilities must be commented out. To do this, put a period before the capability name. For example, see the second ind in the example above. Note that capabilities are defined in a left-to-right order and, therefore, a prior definition will override a later definition.  

    Preparing Descriptions

    The most effective way to prepare a device description is by imitating the description of a similar device in terminfo and building up a description gradually, using partial descriptions with vi to check that they are correct. Be aware that a very unusual device may expose deficiencies in the ability of the terminfo file to describe it or the inability of vi to work with that device. To test a new device description, set the environment variable TERMINFO to the pathname of a directory containing the compiled description you are working on and programs will look there rather than in /usr/share/lib/terminfo. To get the padding for insert-line correct (if the device manufacturer did not document it) a severe test is to comment out xon, edit a large file at 9600 baud with vi, delete 16 or so lines from the middle of the screen, and then press the u key several times quickly. If the display is corrupted, more padding is usually needed. A similar test can be used for insert-character.  

    Section 1-1: Basic Capabilities

    The number of columns on each line for the device is given by the cols numeric capability. If the device has a screen, then the number of lines on the screen is given by the lines capability. If the device wraps around to the beginning of the next line when it reaches the right margin, then it should have the am capability. If the terminal can clear its screen, leaving the cursor in the home position, then this is given by the clear string capability. If the terminal overstrikes (rather than clearing a position when a character is struck over) then it should have the os capability. If the device is a printing terminal, with no soft copy unit, specify both hc and os. If there is a way to move the cursor to the left edge of the current row, specify this as cr. (Normally this will be carriage return, control M.) If there is a way to produce an audible signal (such as a bell or a beep), specify it as bel. If, like most devices, the device uses the xon-xoff flow-control protocol, specify xon.

    If there is a way to move the cursor one position to the left (such as backspace), that capability should be given as cub1. Similarly, sequences to move to the right, up, and down should be given as cuf1, cuu1, and cud1, respectively. These local cursor motions must not alter the text they pass over; for example, you would not normally use ``cuf1=\s'' because the space would erase the character moved over.

    A very important point here is that the local cursor motions encoded in terminfo are undefined at the left and top edges of a screen terminal. Programs should never attempt to backspace around the left edge, unless bw is specified, and should never attempt to go up locally off the top. To scroll text up, a program goes to the bottom left corner of the screen and sends the ind (index) string.

    To scroll text down, a program goes to the top left corner of the screen and sends the ri (reverse index) string. The strings ind and ri are undefined when not on their respective corners of the screen.

    Parameterized versions of the scrolling sequences are indn and rin. These versions have the same semantics as ind and ri, except that they take one parameter and scroll the number of lines specified by that parameter. They are also undefined except at the appropriate edge of the screen.

    The am capability tells whether the cursor sticks at the right edge of the screen when text is output, but this does not necessarily apply to a cuf1 from the last column. Backward motion from the left edge of the screen is possible only when bw is specified. In this case, cub1 will move to the right edge of the previous row. If bw is not given, the effect is undefined. This is useful for drawing a box around the edge of the screen, for example. If the device has switch selectable automatic margins, am should be specified in the terminfo source file. In this case, initialization strings should turn on this option, if possible. If the device has a command that moves to the first column of the next line, that command can be given as nel (newline). It does not matter if the command clears the remainder of the current line, so if the device has no cr and lf it may still be possible to craft a working nel out of one or both of them.

    These capabilities suffice to describe hardcopy and screen terminals. Thus the AT&T 5320 hardcopy terminal is described as follows:

    5320|att5320|AT&T 5320 hardcopy terminal,
      am, hc, os,
      bel=^G, cr=\r, cub1=\b, cnd1=\n,
      dch1=\E[P, dl1=\E[M,

    while the Lear Siegler ADM-3 is described as

    adm3 | lsi adm3,
      am, bel=^G, clear=^Z, cols#80, cr=^M, cub1=^H,
      cud1=^J, ind=^J, lines#24,


    Section 1-2: Parameterized Strings

    Cursor addressing and other strings requiring parameters are described by a parameterized string capability, with printf-like escapes (%x) in it. For example, to address the cursor, the cup capability is given, using two parameters: the row and column to address to. (Rows and columns are numbered from zero and refer to the physical screen visible to the user, not to any unseen memory.) If the terminal has memory relative cursor addressing, that can be indicated by mrcup.

    The parameter mechanism uses a stack and special % codes to manipulate the stack in the manner of Reverse Polish Notation (postfix). Typically a sequence will push one of the parameters onto the stack and then print it in some format. Often more complex operations are necessary. Operations are in postfix form with the operands in the usual order. That is, to subtract 5 from the first parameter, one would use %p1%{5}%-.

    The % encodings have the following meanings:


    outputs `%'


    as in printf, flags are [-+#] and space


    print pop gives %c


    push ith parm


    set dynamic variable [a-z] to pop


    get dynamic variable [a-z] and push it


    set static variable [a-z] to pop


    get static variable [a-z] and push it


    push char constant c


    push decimal constant nn


    push strlen(pop)

    %+ %- %* %/ %m

    arithmetic (%m is mod): push(pop integer2 op pop integer1)

    %& %| %^

    bit operations: push(pop integer2 op pop integer1)

    %= %> %<

    logical operations: push(pop integer2 op pop integer1)

    %A %O

    logical operations: and, or

    %! %~

    unary operations: push(op pop)


    (for ANSI terminals) add 1 to first parm, if one parm present, or first two parms, if more than one parm present

    %? expr %t thenpart %e elsepart %

    if-then-else, %e elsepart is optional; else-if's are possible ala Algol 68: %? c(1) %t b(1) %e c(2) %t b(2) %e c(3) %t b(3) %e c(4) %t b(4) %e b(5)% c(i) are conditions, b(i) are bodies.

    If the ``-'' flag is used with ``%[doxXs]'', then a colon (:) must be placed between the ``%'' and the ``-'' to differentiate the flag from the binary ``%-'' operator, for example ``%:-16.16s''.

    Consider the Hewlett-Packard 2645, which, to get to row 3 and column 12, needs to be sent \E&a12c03Y padded for 6 milliseconds. Note that the order of the rows and columns is inverted here, and that the row and column are zero-padded as two digits. Thus its cup capability is: cup=\E&a%p2%2.2dc%p1%2.2dY$<6>

    The Micro-Term ACT-IV needs the current row and column sent preceded by a ^T, with the row and column simply encoded in binary, ``cup=^T%p1%c%p2%c''. Devices that use ``%c'' need to be able to backspace the cursor (cub1), and to move the cursor up one line on the screen (cuu1). This is necessary because it is not always safe to transmit \n, ^D, and \r, as the system may change or discard them. (The library routines dealing with terminfo set tty modes so that tabs are never expanded, so \t is safe to send. This turns out to be essential for the Ann Arbor 4080.)

    A final example is the LSI ADM-3a, which uses row and column offset by a blank character, thus ``cup=\E=%p1%'\s'%+%c%p2%'\s'%+%c''. After sending ``\E='', this pushes the first parameter, pushes the ASCII value for a space (32), adds them (pushing the sum on the stack in place of the two previous values), and outputs that value as a character. Then the same is done for the second parameter. More complex arithmetic is possible using the stack.  

    Section 1-3: Cursor Motions

    If the terminal has a fast way to home the cursor (to very upper left corner of screen) then this can be given as home; similarly a fast way of getting to the lower left-hand corner can be given as ll; this may involve going up with cuu1 from the home position, but a program should never do this itself (unless ll does) because it can make no assumption about the effect of moving up from the home position. Note that the home position is the same as addressing to (0,0): to the top left corner of the screen, not of memory. (Thus, the \EH sequence on Hewlett-Packard terminals cannot be used for home without losing some of the other features on the terminal.)

    If the device has row or column absolute-cursor addressing, these can be given as single parameter capabilities hpa (horizontal position absolute) and vpa (vertical position absolute). Sometimes these are shorter than the more general two-parameter sequence (as with the Hewlett-Packard 2645) and can be used in preference to cup. If there are parameterized local motions (for example, move n spaces to the right) these can be given as cud, cub, cuf, and cuu with a single parameter indicating how many spaces to move. These are primarily useful if the device does not have cup, such as the Tektronix 4025.

    If the device needs to be in a special mode when running a program that uses these capabilities, the codes to enter and exit this mode can be given as smcup and rmcup. This arises, for example, from terminals, such as the Concept, with more than one page of memory. If the device has only memory relative cursor addressing and not screen relative cursor addressing, a one screen-sized window must be fixed into the device for cursor addressing to work properly. This is also used for the Tektronix 4025, where smcup sets the command character to be the one used by terminfo. If the smcup sequence will not restore the screen after an rmcup sequence is output (to the state prior to outputting rmcup), specify nrrmc.  

    Section 1-4: Area Clears

    If the terminal can clear from the current position to the end of the line, leaving the cursor where it is, this should be given as el. If the terminal can clear from the beginning of the line to the current position inclusive, leaving the cursor where it is, this should be given as el1. If the terminal can clear from the current position to the end of the display, then this should be given as ed. ed is only defined from the first column of a line. (Thus, it can be simulated by a request to delete a large number of lines, if a true ed is not available.)  

    Section 1-5: Insert/Delete Line

    If the terminal can open a new blank line before the line where the cursor is, this should be given as il1; this is done only from the first position of a line. The cursor must then appear on the newly blank line. If the terminal can delete the line which the cursor is on, then this should be given as dl1; this is done only from the first position on the line to be deleted. Versions of il1 and dl1 which take a single parameter and insert or delete that many lines can be given as il and dl.

    If the terminal has a settable destructive scrolling region (like the VT100) the command to set this can be described with the csr capability, which takes two parameters: the top and bottom lines of the scrolling region. The cursor position is, alas, undefined after using this command. It is possible to get the effect of insert or delete line using this command --- the sc and rc (save and restore cursor) commands are also useful. Inserting lines at the top or bottom of the screen can also be done using ri or ind on many terminals without a true insert/delete line, and is often faster even on terminals with those features.

    To determine whether a terminal has destructive scrolling regions or non-destructive scrolling regions, create a scrolling region in the middle of the screen, place data on the bottom line of the scrolling region, move the cursor to the top line of the scrolling region, and do a reverse index (ri) followed by a delete line (dl1) or index (ind). If the data that was originally on the bottom line of the scrolling region was restored into the scrolling region by the dl1 or ind, then the terminal has non-destructive scrolling regions. Otherwise, it has destructive scrolling regions. Do not specify csr if the terminal has non-destructive scrolling regions, unless ind, ri, indn, rin, dl, and dl1 all simulate destructive scrolling.

    If the terminal has the ability to define a window as part of memory, which all commands affect, it should be given as the parameterized string wind. The four parameters are the starting and ending lines in memory and the starting and ending columns in memory, in that order.

    If the terminal can retain display memory above, then the da capability should be given; if display memory can be retained below, then db should be given. These indicate that deleting a line or scrolling a full screen may bring non-blank lines up from below or that scrolling back with ri may bring down non-blank lines.  

    Section 1-6: Insert/Delete Character

    There are two basic kinds of intelligent terminals with respect to insert/delete character operations which can be described using terminfo. The most common insert/delete character operations affect only the characters on the current line and shift characters off the end of the line rigidly. Other terminals, such as the Concept 100 and the Perkin Elmer Owl, make a distinction between typed and untyped blanks on the screen, shifting upon an insert or delete only to an untyped blank on the screen which is either eliminated, or expanded to two untyped blanks. You can determine the kind of terminal you have by clearing the screen and then typing text separated by cursor motions. Type ``abc def'' using local cursor motions (not spaces) between the abc and the def. Then position the cursor before the abc and put the terminal in insert mode. If typing characters causes the rest of the line to shift rigidly and characters to fall off the end, then your terminal does not distinguish between blanks and untyped positions. If the abc shifts over to the def which then move together around the end of the current line and onto the next as you insert, you have the second type of terminal, and should give the capability in, which stands for ``insert null.'' While these are two logically separate attributes (one line versus multiline insert mode, and special treatment of untyped spaces) we have seen no terminals whose insert mode cannot be described with the single attribute.

    terminfo can describe both terminals that have an insert mode and terminals which send a simple sequence to open a blank position on the current line. Give as smir the sequence to get into insert mode. Give as rmir the sequence to leave insert mode. Now give as ich1 any sequence needed to be sent just before sending the character to be inserted. Most terminals with a true insert mode will not give ich1; terminals that send a sequence to open a screen position should give it here. (If your terminal has both, insert mode is usually preferable to ich1. Do not give both unless the terminal actually requires both to be used in combination.) If post-insert padding is needed, give this as a number of milliseconds padding in ip (a string option). Any other sequence which may need to be sent after an insert of a single character may also be given in ip. If your terminal needs both to be placed into an `insert mode' and a special code to precede each inserted character, then both smir/rmir and ich1 can be given, and both will be used. The ich capability, with one parameter, n, will insert n blanks.

    If padding is necessary between characters typed while not in insert mode, give this as a number of milliseconds padding in rmp.

    It is occasionally necessary to move around while in insert mode to delete characters on the same line (for example, if there is a tab after the insertion position). If your terminal allows motion while in insert mode you can give the capability mir to speed up inserting in this case. Omitting mir will affect only speed. Some terminals (notably Datamedia's) must not have mir because of the way their insert mode works.

    Finally, you can specify dch1 to delete a single character, dch with one parameter, n, to delete n characters, and delete mode by giving smdc and rmdc to enter and exit delete mode (any mode the terminal needs to be placed in for dch1 to work).

    A command to erase n characters (equivalent to outputting n blanks without moving the cursor) can be given as ech with one parameter.  

    Section 1-7: Highlighting, Underlining, and Visible Bells

    Your device may have one or more kinds of display attributes that allow you to highlight selected characters when they appear on the screen. The following display modes (shown with the names by which they are set) may be available: a blinking screen (blink), bold or extra-bright characters (bold), dim or half-bright characters (dim), blanking or invisible text (invis), protected text (prot), a reverse-video screen (rev), and an alternate character set (smacs to enter this mode and rmacs to exit it). (If a command is necessary before you can enter alternate character set mode, give the sequence in enacs or "enable alternate-character-set" mode.) Turning on any of these modes singly may or may not turn off other modes.

    sgr0 should be used to turn off all video enhancement capabilities. It should always be specified because it represents the only way to turn off some capabilities, such as dim or blink.

    You should choose one display method as standout mode and use it to highlight error messages and other kinds of text to which you want to draw attention. Choose a form of display that provides strong contrast but that is easy on the eyes. (We recommend reverse-video plus half-bright or reverse-video alone.) The sequences to enter and exit standout mode are given as smso and rmso, respectively. If the code to change into or out of standout mode leaves one or even two blank spaces on the screen, as the TVI 912 and Teleray 1061 do, then xmc should be given to tell how many spaces are left.

    Sequences to begin underlining and end underlining can be specified as smul and rmul , respectively. If the device has a sequence to underline the current character and to move the cursor one space to the right (such as the Micro-Term MIME), this sequence can be specified as uc.

    Terminals with the ``magic cookie'' glitch (xmc) deposit special ``cookies'' when they receive mode-setting sequences, which affect the display algorithm rather than having extra bits for each character. Some terminals, such as the Hewlett-Packard 2621, automatically leave standout mode when they move to a new line or the cursor is addressed. Programs using standout mode should exit standout mode before moving the cursor or sending a newline, unless the msgr capability, asserting that it is safe to move in standout mode, is present.

    If the terminal has a way of flashing the screen to indicate an error quietly (a bell replacement), then this can be given as flash; it must not move the cursor. A good flash can be done by changing the screen into reverse video, pad for 200 ms, then return the screen to normal video.

    If the cursor needs to be made more visible than normal when it is not on the bottom line (to make, for example, a non-blinking underline into an easier to find block or blinking underline) give this sequence as cvvis. The boolean chts should also be given. If there is a way to make the cursor completely invisible, give that as civis. The capability cnorm should be given which undoes the effects of either of these modes.

    If your terminal generates underlined characters by using the underline character (with no special sequences needed) even though it does not otherwise overstrike characters, then you should specify the capability ul. For devices on which a character overstriking another leaves both characters on the screen, specify the capability os. If overstrikes are erasable with a blank, then this should be indicated by specifying eo.

    If there is a sequence to set arbitrary combinations of modes, this should be given as sgr (set attributes), taking nine parameters. Each parameter is either 0 or non-zero, as the corresponding attribute is on or off. The nine parameters are, in order: standout, underline, reverse, blink, dim, bold, blank, protect, alternate character set. Not all modes need to be supported by sgr; only those for which corresponding separate attribute commands exist should be supported. For example, let's assume that the terminal in question needs the following escape sequences to turn on various modes.

    parameterattributeescape sequence


    Note that each escape sequence requires a 0 to turn off other modes before turning on its own mode. Also note that, as suggested above, standout is set up to be the combination of reverse and dim. Also, because this terminal has no bold mode, bold is set up as the combination of reverse and underline. In addition, to allow combinations, such as underline+blink, the sequence to use would be \E[0;3;5m. The terminal doesn't have protect mode, either, but that cannot be simulated in any way, so p8 is ignored. The altcharset mode is different in that it is either ^O or ^N, depending on whether it is off or on. If all modes were to be turned on, the sequence would be \E[0;3;4;5;7;8m^N.

    Now look at when different sequences are output. For example, ;3 is output when either p2 or p6 is true, that is, if either underline or bold modes are turned on. Writing out the above sequences, along with their dependencies, gives the following:

    sequencewhen to outputterminfo translation

    ^N or ^O

    Putting this all together into the sgr sequence gives:

    sgr=\E[0%?%p2%p6%|%t;3%%?%p1%p3%|%p6% |%t;4%%?%p5%t;5%%?%p1%p5% |%t;7%%?%p7%t;8%m%?%p9%t^N%e^O%,

    Remember that sgr and sgr0 must always be specified.  

    Section 1-8: Keypad

    If the device has a keypad that transmits sequences when the keys are pressed, this information can also be specified. Note that it is not possible to handle devices where the keypad only works in local (this applies, for example, to the unshifted Hewlett-Packard 2621 keys). If the keypad can be set to transmit or not transmit, specify these sequences as smkx and rmkx. Otherwise the keypad is assumed to always transmit.

    The sequences sent by the left arrow, right arrow, up arrow, down arrow, and home keys can be given as kcub1, kcuf1, kcuu1, kcud1,and khome, respectively. If there are function keys such as f0, f1, ..., f63, the sequences they send can be specified as kf0, kf1, ..., kf63. If the first 11 keys have labels other than the default f0 through f10, the labels can be given as lf0, lf1, ..., lf10. The codes transmitted by certain other special keys can be given: kll (home down), kbs (backspace), ktbc (clear all tabs), kctab (clear the tab stop in this column), kclr (clear screen or erase key), kdch1 (delete character), kdl1 (delete line), krmir (exit insert mode), kel (clear to end of line), ked (clear to end of screen), kich1 (insert character or enter insert mode), kil1 (insert line), knp (next page), kpp (previous page), kind (scroll forward/down), kri (scroll backward/up), khts (set a tab stop in this column). In addition, if the keypad has a 3 by 3 array of keys including the four arrow keys, the other five keys can be given as ka1, ka3, kb2, kc1, and kc3. These keys are useful when the effects of a 3 by 3 directional pad are needed. Further keys are defined above in the capabilities list.

    Strings to program function keys can be specified as pfkey, pfloc, and pfx. A string to program screen labels should be specified as pln. Each of these strings takes two parameters: a function key identifier and a string to program it with. pfkey causes pressing the given key to be the same as the user typing the given string; pfloc causes the string to be executed by the terminal in local mode; and pfx causes the string to be transmitted to the computer. The capabilities nlab, lw and lh define the number of programmable screen labels and their width and height. If there are commands to turn the labels on and off, give them in smln and rmln. smln is normally output after one or more pln sequences to make sure that the change becomes visible.  

    Section 1-9: Tabs and Initialization

    If the device has hardware tabs, the command to advance to the next tab stop can be given as ht (usually control I). A ``backtab'' command that moves leftward to the next tab stop can be given as cbt. By convention, if tty modes show that tabs are being expanded by the computer rather than being sent to the device, programs should not use ht or cbt (even if they are present) because the user may not have the tab stops properly set. If the device has hardware tabs that are initially set every n spaces when the device is powered up, the numeric parameter it is given, showing the number of spaces the tabs are set to. This is normally used by tput init (see tput(1)) to determine whether to set the mode for hardware tab expansion and whether to set the tab stops. If the device has tab stops that can be saved in nonvolatile memory, the terminfo description can assume that they are properly set. If there are commands to set and clear tab stops, they can be given as tbc (clear all tab stops) and hts (set a tab stop in the current column of every row).

    Other capabilities include: is1, is2, and is3, initialization strings for the device; iprog, the path name of a program to be run to initialize the device; and if, the name of a file containing long initialization strings. These strings are expected to set the device into modes consistent with the rest of the terminfo description. They must be sent to the device each time the user logs in and be output in the following order: run the program iprog; output is1; output is2; set the margins using mgc, smgl and smgr; set the tabs using tbc and hts; print the file if; and finally output is3. This is usually done using the init option of tput.

    Most initialization is done with is2. Special device modes can be set up without duplicating strings by putting the common sequences in is2 and special cases in is1 and is3. Sequences that do a reset from a totally unknown state can be given as rs1, rs2, rf, and rs3, analogous to is1, is2, is3, and if. (The method using files, if and rf, is used for a few terminals, from /usr/share/lib/tabset/*; however, the recommended method is to use the initialization and reset strings.) These strings are output by tput reset, which is used when the terminal gets into a wedged state. Commands are normally placed in rs1, rs2, rs3, and rf only if they produce annoying effects on the screen and are not necessary when logging in. For example, the command to set a terminal into 80-column mode would normally be part of is2, but on some terminals it causes an annoying glitch on the screen and is not normally needed because the terminal is usually already in 80-column mode.

    If a more complex sequence is needed to set the tabs than can be described by using tbc and hts, the sequence can be placed in is2 or if.

    Any margin can be cleared with mgc. (For instructions on how to specify commands to set and clear margins, see "Margins" below under "PRINTER CAPABILITIES".)  

    Section 1-10: Delays

    Certain capabilities control padding in the tty driver. These are primarily needed by hard-copy terminals, and are used by tput init to set tty modes appropriately. Delays embedded in the capabilities cr, ind, cub1, ff, and tab can be used to set the appropriate delay bits to be set in the tty driver. If pb (padding baud rate) is given, these values can be ignored at baud rates below the value of pb.  

    Section 1-11: Status Lines

    If the terminal has an extra ``status line'' that is not normally used by software, this fact can be indicated. If the status line is viewed as an extra line below the bottom line, into which one can cursor address normally (such as the Heathkit h19's 25th line, or the 24th line of a VT100 which is set to a 23-line scrolling region), the capability hs should be given. Special strings that go to a given column of the status line and return from the status line can be given as tsl and fsl. (fsl must leave the cursor position in the same place it was before tsl. If necessary, the sc and rc strings can be included in tsl and fsl to get this effect.) The capability tsl takes one parameter, which is the column number of the status line the cursor is to be moved to.

    If escape sequences and other special commands, such as tab, work while in the status line, the flag eslok can be given. A string which turns off the status line (or otherwise erases its contents) should be given as dsl. If the terminal has commands to save and restore the position of the cursor, give them as sc and rc. The status line is normally assumed to be the same width as the rest of the screen, for example, cols. If the status line is a different width (possibly because the terminal does not allow an entire line to be loaded) the width, in columns, can be indicated with the numeric parameter wsl.  

    Section 1-12: Line Graphics

    If the device has a line drawing alternate character set, the mapping of glyph to character would be given in acsc. The definition of this string is based on the alternate character set used in the DEC VT100 terminal, extended slightly with some characters from the AT&T 4410v1 terminal.

    Glyph Namevt100+ Character

    arrow pointing right+
    arrow pointing left
    arrow pointing down
    solid square block
    lantern symbol
    arrow pointing up
    checker board (stipple)
    degree symbol
    board of squares
    lower right corner
    upper right corner
    upper left corner
    lower left corner
    scan line 1
    horizontal line
    scan line 9
    left tee
    right tee
    bottom tee
    top tee
    vertical line

    The best way to describe a new device's line graphics set is to add a third column to the above table with the characters for the new device that produce the appropriate glyph when the device is in the alternate character set mode. For example,

    Glyph Namevt100+ CharNew tty Char

    upper left cornerlR
    lower left corner
    upper right corner
    lower right corner
    horizontal line
    vertical line

    Now write down the characters left to right, as in ``acsc=lRmFkTjGq\,x.''.

    In addition, terminfo allows you to define multiple character sets. See Section 2-5 for details.  

    Section 1-13: Color Manipulation

    Let us define two methods of color manipulation: the Tektronix method and the HP method. The Tektronix method uses a set of N predefined colors (usually 8) from which a user can select "current" foreground and background colors. Thus a terminal can support up to N colors mixed into N*N color-pairs to be displayed on the screen at the same time. When using an HP method the user cannot define the foreground independently of the background, or vice-versa. Instead, the user must define an entire color-pair at once. Up to M color-pairs, made from 2*M different colors, can be defined this way. Most existing color terminals belong to one of these two classes of terminals.

    The numeric variables colors and pairs define the number of colors and color-pairs that can be displayed on the screen at the same time. If a terminal can change the definition of a color (for example, the Tektronix 4100 and 4200 series terminals), this should be specified with ccc (can change color). To change the definition of a color (Tektronix 4200 method), use initc (initialize color). It requires four arguments: color number (ranging from 0 to colors-1) and three RGB (red, green, and blue) values or three HLS colors (Hue, Lightness, Saturation). Ranges of RGB and HLS values are terminal dependent.

    Tektronix 4100 series terminals only use HLS color notation. For such terminals (or dual-mode terminals to be operated in HLS mode) one must define a boolean variable hls; that would instruct the curses init_color routine to convert its RGB arguments to HLS before sending them to the terminal. The last three arguments to the initc string would then be HLS values.

    If a terminal can change the definitions of colors, but uses a color notation different from RGB and HLS, a mapping to either RGB or HLS must be developed.

    To set current foreground or background to a given color, use setaf (set ANSI foreground) and setab (set ANSI background). They require one parameter: the number of the color. To initialize a color-pair (HP method), use initp (initialize pair). It requires seven parameters: the number of a color-pair (range=0 to pairs-1), and six RGB values: three for the foreground followed by three for the background. (Each of these groups of three should be in the order RGB.) When initc or initp are used, RGB or HLS arguments should be in the order "red, green, blue" or "hue, lightness, saturation"), respectively. To make a color-pair current, use scp (set color-pair). It takes one parameter, the number of a color-pair.

    Some terminals (for example, most color terminal emulators for PCs) erase areas of the screen with current background color. In such cases, bce (background color erase) should be defined. The variable op (original pair) contains a sequence for setting the foreground and the background colors to what they were at the terminal start-up time. Similarly, oc (original colors) contains a control sequence for setting all colors (for the Tektronix method) or color-pairs (for the HP method) to the values they had at the terminal start-up time.

    Some color terminals substitute color for video attributes. Such video attributes should not be combined with colors. Information about these video attributes should be packed into the ncv (no color video) variable. There is a one-to-one correspondence between the nine least significant bits of that variable and the video attributes. The following table depicts this correspondence.

    AttributeBit PositionDecimal Value


    When a particular video attribute should not be used with colors, the corresponding ncv bit should be set to 1; otherwise it should be set to zero. To determine the information to pack into the ncv variable, you must add together the decimal values corresponding to those attributes that cannot coexist with colors. For example, if the terminal uses colors to simulate reverse video (bit number 2 and decimal value 4) and bold (bit number 5 and decimal value 32), the resulting value for ncv will be 36 (4 + 32).  

    Section 1-14: Miscellaneous

    If the terminal requires other than a null (zero) character as a pad, then this can be given as pad. Only the first character of the pad string is used. If the terminal does not have a pad character, specify npc.

    If the terminal can move up or down half a line, this can be indicated with hu (half-line up) and hd (half-line down). This is primarily useful for superscripts and subscripts on hardcopy terminals. If a hardcopy terminal can eject to the next page (form feed), give this as ff (usually control L).

    If there is a command to repeat a given character a given number of times (to save time transmitting a large number of identical characters) this can be indicated with the parameterized string rep. The first parameter is the character to be repeated and the second is the number of times to repeat it. Thus, tparm(repeat_char, 'x', 10) is the same as xxxxxxxxxx.

    If the terminal has a settable command character, such as the Tektronix 4025, this can be indicated with cmdch. A prototype command character is chosen which is used in all capabilities. This character is given in the cmdch capability to identify it. The following convention is supported on some systems: If the environment variable CC exists, all occurrences of the prototype character are replaced with the character in CC.

    Terminal descriptions that do not represent a specific kind of known terminal, such as switch, dialup, patch, and network, should include the gn (generic) capability so that programs can complain that they do not know how to talk to the terminal. (This capability does not apply to virtual terminal descriptions for which the escape sequences are known.) If the terminal is one of those supported by the system virtual terminal protocol, the terminal number can be given as vt. A line-turn-around sequence to be transmitted before doing reads should be specified in rfi.

    If the device uses xon/xoff handshaking for flow control, give xon. Padding information should still be included so that routines can make better decisions about costs, but actual pad characters will not be transmitted. Sequences to turn on and off xon/xoff handshaking may be given in smxon and rmxon. If the characters used for handshaking are not ^S and ^Q, they may be specified with xonc and xoffc.

    If the terminal has a ``meta key'' which acts as a shift key, setting the 8th bit of any character transmitted, this fact can be indicated with km. Otherwise, software will assume that the 8th bit is parity and it will usually be cleared. If strings exist to turn this ``meta mode'' on and off, they can be given as smm and rmm.

    If the terminal has more lines of memory than will fit on the screen at once, the number of lines of memory can be indicated with lm. A value of lm#0 indicates that the number of lines is not fixed, but that there is still more memory than fits on the screen.

    Media copy strings which control an auxiliary printer connected to the terminal can be given as mc0: print the contents of the screen, mc4: turn off the printer, and mc5: turn on the printer. When the printer is on, all text sent to the terminal will be sent to the printer. A variation, mc5p, takes one parameter, and leaves the printer on for as many characters as the value of the parameter, then turns the printer off. The parameter should not exceed 255. If the text is not displayed on the terminal screen when the printer is on, specify mc5i (silent printer). All text, including mc4, is transparently passed to the printer while an mc5p is in effect.  

    Section 1-15: Special Cases

    The working model used by terminfo fits most terminals reasonably well. However, some terminals do not completely match that model, requiring special support by terminfo. These are not meant to be construed as deficiencies in the terminals; they are just differences between the working model and the actual hardware. They may be unusual devices or, for some reason, do not have all the features of the terminfo model implemented.

    Terminals that cannot display tilde (~) characters, such as certain Hazeltine terminals, should indicate hz.

    Terminals that ignore a linefeed immediately after an am wrap, such as the Concept 100, should indicate xenl. Those terminals whose cursor remains on the right-most column until another character has been received, rather than wrapping immediately upon receiving the right-most character, such as the VT100, should also indicate xenl.

    If el is required to get rid of standout (instead of writing normal text on top of it), xhp should be given.

    Those Teleray terminals whose tabs turn all characters moved over to blanks, should indicate xt (destructive tabs). This capability is also taken to mean that it is not possible to position the cursor on top of a ``magic cookie.'' Therefore, to erase standout mode, it is necessary, instead, to use delete and insert line.

    Those Beehive Superbee terminals which do not transmit the escape or control-C characters, should specify xsb, indicating that the f1 key is to be used for escape and the f2 key for control C.  

    Section 1-16: Similar Terminals

    If there are two very similar terminals, one can be defined as being just like the other with certain exceptions. The string capability use can be given with the name of the similar terminal. The capabilities given before use override those in the terminal type invoked by use. A capability can be canceled by placing xx@ to the left of the capability definition, where xx is the capability. For example, the entry

    att4424-2|Teletype4424 in display function group ii,
    rev@, sgr@, smul@, use=att4424,

    defines an AT&T4424 terminal that does not have the rev, sgr, and smul capabilities, and hence cannot do highlighting. This is useful for different modes for a terminal, or for different user preferences. More than one use capability may be given.  


    The terminfo database allows you to define capabilities of printers as well as terminals. To find out what capabilities are available for printers as well as for terminals, see the two lists under "DEVICE CAPABILITIES" that list capabilities by variable and by capability name.  

    Section 2-1: Rounding Values

    Because parameterized string capabilities work only with integer values, we recommend that terminfo designers create strings that expect numeric values that have been rounded. Application designers should note this and should always round values to the nearest integer before using them with a parameterized string capability.  

    Section 2-2: Printer Resolution

    A printer's resolution is defined to be the smallest spacing of characters it can achieve. In general printers have independent resolution horizontally and vertically. Thus the vertical resolution of a printer can be determined by measuring the smallest achievable distance between consecutive printing baselines, while the horizontal resolution can be determined by measuring the smallest achievable distance between the left-most edges of consecutive printed, identical, characters.

    All printers are assumed to be capable of printing with a uniform horizontal and vertical resolution. The view of printing that terminfo currently presents is one of printing inside a uniform matrix: All characters are printed at fixed positions relative to each ``cell'' in the matrix; furthermore, each cell has the same size given by the smallest horizontal and vertical step sizes dictated by the resolution. (The cell size can be changed as will be seen later.)

    Many printers are capable of ``proportional printing,'' where the horizontal spacing depends on the size of the character last printed. terminfo does not make use of this capability, although it does provide enough capability definitions to allow an application to simulate proportional printing.

    A printer must not only be able to print characters as close together as the horizontal and vertical resolutions suggest, but also of ``moving'' to a position an integral multiple of the smallest distance away from a previous position. Thus printed characters can be spaced apart a distance that is an integral multiple of the smallest distance, up to the length or width of a single page.

    Some printers can have different resolutions depending on different ``modes.'' In ``normal mode,'' the existing terminfo capabilities are assumed to work on columns and lines, just like a video terminal. Thus the old lines capability would give the length of a page in lines, and the cols capability would give the width of a page in columns. In ``micro mode,'' many terminfo capabilities work on increments of lines and columns. With some printers the micro mode may be concomitant with normal mode, so that all the capabilities work at the same time.  

    Section 2-3: Specifying Printer Resolution

    The printing resolution of a printer is given in several ways. Each specifies the resolution as the number of smallest steps per distance:

       Specification of Printer Resolution
       Characteristic Number of Smallest Steps
        orhi    Steps per inch horizontally
        orvi    Steps per inch vertically
        orc     Steps per column
        orl     Steps per line

    When printing in normal mode, each character printed causes movement to the next column, except in special cases described later; the distance moved is the same as the per-column resolution. Some printers cause an automatic movement to the next line when a character is printed in the rightmost position; the distance moved vertically is the same as the per-line resolution. When printing in micro mode, these distances can be different, and may be zero for some printers.

        Specification of Printer Resolution
        Automatic Motion after Printing
        Normal Mode:
        orc     Steps moved horizontally
        orl     Steps moved vertically
        Micro Mode:
        mcs     Steps moved horizontally
        mls     Steps moved vertically

    Some printers are capable of printing wide characters. The distance moved when a wide character is printed in normal mode may be different from when a regular width character is printed. The distance moved when a wide character is printed in micro mode may also be different from when a regular character is printed in micro mode, but the differences are assumed to be related: If the distance moved for a regular character is the same whether in normal mode or micro mode (mcs=orc), then the distance moved for a wide character is also the same whether in normal mode or micro mode. This doesn't mean the normal character distance is necessarily the same as the wide character distance, just that the distances don't change with a change in normal to micro mode. However, if the distance moved for a regular character is different in micro mode from the distance moved in normal mode (mcs<orc), the micro mode distance is assumed to be the same for a wide character printed in micro mode, as the table below shows.

        Specification of Printer Resolution
        Automatic Motion after Printing Wide Character
        Normal Mode or Micro Mode (mcs = orc):
        widcs   Steps moved horizontally
        Micro Mode (mcs < orc):
        mcs     Steps moved horizontally

    There may be control sequences to change the number of columns per inch (the character pitch) and to change the number of lines per inch (the line pitch). If these are used, the resolution of the printer changes, but the type of change depends on the printer:

        Specification of Printer Resolution
        Changing the Character/Line Pitches
        cpi     Change character pitch
        cpix    If set, cpi changes orhi, otherwise changes
        lpi     Change line pitch
        lpix    If set, lpi changes orvi, otherwise changes
        chr     Change steps per column
        cvr     Change steps per line

    The cpi and lpi string capabilities are each used with a single argument, the pitch in columns (or characters) and lines per inch, respectively. The chr and cvr string capabilities are each used with a single argument, the number of steps per column and line, respectively.

    Using any of the control sequences in these strings will imply a change in some of the values of orc, orhi, orl, and orvi. Also, the distance moved when a wide character is printed, widcs, changes in relation to orc. The distance moved when a character is printed in micro mode, mcs, changes similarly, with one exception: if the distance is 0 or 1, then no change is assumed (see items marked with * in the following table).

    Programs that use cpi, lpi, chr, or cvr should recalculate the printer resolution (and should recalculate other values--- see "Effect of Changing Printing Resolution" under "Dot-Mapped Graphics").

        Specification of Printer Resolution
        Effects of Changing the Character/Line Pitches
      Before            After
    Using cpi with cpix clear:
    $bold orhi '$   orhi
    $bold orc '$    $bold orc = bold orhi over V sub italic cpi$
    Using cpi with cpix set:
    $bold orhi '$   $bold orhi = bold orc cdot V sub italic cpi$
    $bold orc '$    $bold orc$
    Using lpi with lpix clear:
    $bold orvi '$   $bold orvi$
    $bold orl '$    $bold orl = bold orvi over V sub italic lpi$
    Using lpi with lpix set:
    $bold orvi '$   $bold orvi = bold orl cdot V sub italic lpi$
    $bold orl '$    $bold orl$
    Using chr:
    $bold orhi '$   $bold orhi$
    $bold orc '$    $V sub italic chr$
    Using cvr:
    $bold orvi '$   $bold orvi$
    $bold orl '$    $V sub italic cvr$
    Using cpi or chr:
    $bold widcs '$  $bold widcs = bold {widcs '} bold orc over { bold {orc '} }$
    $bold mcs '$    $bold mcs = bold {mcs '} bold orc over { bold {orc '} }$

    $V sub italic cpi$, $V sub italic lpi$, $V sub italic chr$, and $V sub italic cvr$ are the arguments used with cpi, lpi, chr, and cvr, respectively. The prime marks (') indicate the old values.  

    Section 2-4: Capabilities that Cause Movement

    In the following descriptions, ``movement'' refers to the motion of the ``current position.'' With video terminals this would be the cursor; with some printers this is the carriage position. Other printers have different equivalents. In general, the current position is where a character would be displayed if printed.

    terminfo has string capabilities for control sequences that cause movement a number of full columns or lines. It also has equivalent string capabilities for control sequences that cause movement a number of smallest steps.

    String Capabilities for Motion
        mcub1   Move 1 step left
        mcuf1   Move 1 step right
        mcuu1   Move 1 step up
        mcud1   Move 1 step down
        mcub    Move N steps left
        mcuf    Move N steps right
        mcuu    Move N steps up
        mcud    Move N steps down
        mhpa    Move N steps from the left
        mvpa    Move N steps from the top

    The latter six strings are each used with a single argument, N.

    Sometimes the motion is limited to less than the width or length of a page. Also, some printers don't accept absolute motion to the left of the current position. terminfo has capabilities for specifying these limits.

    Limits to Motion
        mjump     Limit on use of mcub1, mcuf1, mcuu1,  mcud1
        maddr      Limit on use of mhpa, mvpa
        xhpa        If set, hpa and mhpa can't move left
        xvpa        If set, vpa and mvpa can't move up

    If a printer needs to be in a ``micro mode'' for the motion capabilities described above to work, there are string capabilities defined to contain the control sequence to enter and exit this mode. A boolean is available for those printers where using a carriage return causes an automatic return to normal mode.

       Entering/Exiting Micro Mode
        smicm   Enter micro mode
        rmicm   Exit micro mode
        crxm    Using cr exits micro mode

    The movement made when a character is printed in the rightmost position varies among printers. Some make no movement, some move to the beginning of the next line, others move to the beginning of the same line. terminfohas boolean capabilities for describing all three cases.

                   What Happens After Character
                   Printed in Rightmost Position
        sam     Automatic move to beginning of same line

    Some printers can be put in a mode where the normal direction of motion is reversed. This mode can be especially useful when there are no capabilities for leftward or upward motion, because those capabilities can be built from the motion reversal capability and the rightward or downward motion capabilities. It is best to leave it up to an application to build the leftward or upward capabilities, though, and not enter them in the terminfo database. This allows several reverse motions to be strung together without intervening wasted steps that leave and reenter reverse mode.

    Entering/Exiting Reverse Modes
        slm     Reverse sense of horizontal motions
        rlm     Restore sense of horizontal motions
        sum     Reverse sense of vertical motions
        rum     Restore sense of vertical motions
        While sense of horizontal motions reversed:
        mc┴ub1   Move 1 step right
        mcuf1   Move 1 step left
        mcub    Move N steps right
        mcuf    Move N steps left
        cub1    Move 1 column right
        cuf1    Move 1 column left
        cub     Move N columns right
        cuf     Move N columns left
        While sense of vertical motions reversed:
        mcuu1   Move 1 step down
        mcud1   Move 1 step up
        mcuu    Move N steps down
        mcu┬d    Move N steps up
        cuu1    Move 1 line down
        cud1    Move 1 line up
        cuu     Move N lines down
        cud     Move N lines up

    The reverse motion modes should not affect the mvpa and mhpa absolute motion capabilities. The reverse vertical motion mode should, however, also reverse the action of the line ``wrapping'' that occurs when a character is printed in the right-most position. Thus printers that have the standard terminfo capability am defined should experience motion to the beginning of the previous line when a character is printed in the right-most position under reverse vertical motion mode.

    The action when any other motion capabilities are used in reverse motion modes is not defined; thus, programs must exit reverse motion modes before using other motion capabilities.

    Two miscellaneous capabilities complete the list of new motion capabilities. One of these is needed for printers that move the current position to the beginning of a line when certain control characters, such as ``line-feed'' or ``form-feed,'' are used. The other is used for the capability of suspending the motion that normally occurs after printing a character.

    Miscellaneous Motion Strings
        docr    List of control characters causing cr
        zerom   Prevent auto motion after printing next single character



    terminfo provides two strings for setting margins on terminals: one for the left and one for the right margin. Printers, however, have two additional margins, for the top and bottom margins of each page. Furthermore, some printers require not using motion strings to move the current position to a margin and then fixing the margin there, but require the specification of where a margin should be regardless of the current position. Therefore terminfo offers six additional strings for defining margins with printers.

    Setting Margins
        smgl    Set left margin at current column
        smgr    Set right margin at current column
        smgb    Set bottom margin at current line
        smgt    Set top margin at current line
        smgbp   Set bottom margin at line N
        smglp   Set left margin at column N
        smgrp   Set right margin at column N
        smgtp   Set top margin at line N

    The last four strings are used with one or more arguments that give the position of the margin or margins to set. If both of smglp and smgrp are set, each is used with a single argument, N, that gives the column number of the left and right margin, respectively. If both of smgtp and smgbp are set, each is used to set the top and bottom margin, respectively: smgtp is used with a single argument, N, the line number of the top margin; however, smgbp is used with two arguments, N and M, that give the line number of the bottom margin, the first counting from the top of the page and the second counting from the bottom. This accommodates the two styles of specifying the bottom margin in different manufacturers' printers. When coding a terminfo entry for a printer that has a settable bottom margin, only the first or second parameter should be used, depending on the printer. When writing an application that uses smgbp to set the bottom margin, both arguments must be given.

    If only one of smglp and smgrp is set, then it is used with two arguments, the column number of the left and right margins, in that order. Likewise, if only one of smgtp and smgbp is set, then it is used with two arguments that give the top and bottom margins, in that order, counting from the top of the page. Thus when coding a terminfo entry for a printer that requires setting both left and right or top and bottom margins simultaneously, only one of smglp and smgrp or smgtp and smgbp should be defined; the other should be left blank. When writing an application that uses these string capabilities, the pairs should be first checked to see if each in the pair is set or only one is set, and should then be used accordingly.

    In counting lines or columns, line zero is the top line and column zero is the left-most column. A zero value for the second argument with smgbp means the bottom line of the page.

    All margins can be cleared with mgc.  

    Shadows, Italics, Wide Characters

    Five new sets of strings describe the capabilities printers have of enhancing printed text.

    Enhanced Printing
        sshm    Enter shadow-printing mode
        rshm    Exit shadow-printing mode
        sitm    Enter italicizing mode
        ritm    Exit italicizing mode
        swidm   Enter wide character mode
        rwidm   Exit wide character mode
        ssupm   Enter superscript mode
        m   Exit superscript mode
        supcs   List of characters available as superscripts
        ssubm   Enter subscript mode
        rsubm   Exit subscript mode
        subcs   List of characters available as subscripts

    If a printer requires the sshm control sequence before every character to be shadow-printed, the rshm string is left blank. Thus programs that find a control sequence in sshm but none in rshm should use the sshm control sequence before every character to be shadow-printed; otherwise, the sshm control sequence should be used once before the set of characters to be shadow-printed, followed by rshm. The same is also true of each of the sitm/ritm, swidm/rwidm, ssupm/rsupm, and ssubm/ rsubm pairs.

    Note that terminfo also has a capability for printing emboldened text (bold). While shadow printing and emboldened printing are similar in that they ``darken'' the text, many printers produce these two types of print in slightly different ways. Generally, emboldened printing is done by overstriking the same character one or more times. Shadow printing likewise usually involves overstriking, but with a slight movement up and/or to the side so that the character is ``fatter.''

    It is assumed that enhanced printing modes are independent modes, so that it would be possible, for instance, to shadow print italicized subscripts.

    As mentioned earlier, the amount of motion automatically made after printing a wide character should be given in widcs.

    If only a subset of the printable ASCII characters can be printed as superscripts or subscripts, they should be listed in supcs or subcs strings, respectively. If the ssupm or ssubm strings contain control sequences, but the corresponding supcs or subcs strings are empty, it is assumed that all printable ASCII characters are available as superscripts or subscripts.

    Automatic motion made after printing a superscript or subscript is assumed to be the same as for regular characters. Thus, for example, printing any of the following three examples will result in equivalent motion:

    Bi B(i) B^i

    Note that the existing msgr boolean capability describes whether motion control sequences can be used while in ``standout mode.'' This capability is extended to cover the enhanced printing modes added here. msgr should be set for those printers that accept any motion control sequences without affecting shadow, italicized, widened, superscript, or subscript printing. Conversely, if msgr is not set, a program should end these modes before attempting any motion.  

    Section 2-5: Alternate Character Sets

    In addition to allowing you to define line graphics (described in Section 1-12), terminfo lets you define alternate character sets. The following capabilities cover printers and terminals with multiple selectable or definable character sets.

    Alternate Character Sets
        scs     Select character set N
        scsd    Start definition of character set N, M characters
        defc    Define character A, B dots wide, descender D
        rcsd    End definition of character set N
        csnm    List of character set names
        daisy   Printer has manually changed print-wheels

    The scs, rcsd, and csnm strings are used with a single argument, N, a number from 0 to 63 that identifies the character set. The scsd string is also used with the argument N and another, M, that gives the number of characters in the set. The defc string is used with three arguments: A gives the ASCII code representation for the character, B gives the width of the character in dots, and D is zero or one depending on whether the character is a ``descender'' or not. The defc string is also followed by a string of ``image-data'' bytes that describe how the character looks (see below).

    Character set 0 is the default character set present after the printer has been initialized. Not every printer has 64 character sets, of course; using scs with an argument that doesn't select an available character set should cause a null result from tparm.

    If a character set has to be defined before it can be used, the scsd control sequence is to be used before defining the character set, and the rcsd is to be used after. They should also cause a null result from tparm when used with an argument N that doesn't apply. If a character set still has to be selected after being defined, the scs control sequence should follow the rcsd control sequence. By examining the results of using each of the scs, scsd, and rcsd strings with a character set number in a call to tparm, a program can determine which of the three are needed.

    Between use of the scsd and rcsd strings, the defc string should be used to define each character. To print any character on printers covered by terminfo, the ASCII code is sent to the printer. This is true for characters in an alternate set as well as ``normal'' characters. Thus the definition of a character includes the ASCII code that represents it. In addition, the width of the character in dots is given, along with an indication of whether the character should descend below the print line (such as the lower case letter ``g'' in most character sets). The width of the character in dots also indicates the number of image-data bytes that will follow the defc string. These image-data bytes indicate where in a dot-matrix pattern ink should be applied to ``draw'' the character; the number of these bytes and their form are defined below under ``Dot-Mapped Graphics.''

    It's easiest for the creator of terminfo entries to refer to each character set by number; however, these numbers will be meaningless to the application developer. The csnm string alleviates this problem by providing names for each number.

    When used with a character set number in a call to tparm, the csnm string will produce the equivalent name. These names should be used as a reference only. No naming convention is implied, although anyone who creates a terminfo entry for a printer should use names consistent with the names found in user documents for the printer. Application developers should allow a user to specify a character set by number (leaving it up to the user to examine the csnm string to determine the correct number), or by name, where the application examines the csnm string to determine the corresponding character set number.

    These capabilities are likely to be used only with dot-matrix printers. If they are not available, the strings should not be defined. For printers that have manually changed print-wheels or font cartridges, the boolean daisy is set.  

    Section 2-6: Dot-Matrix Graphics

    Dot-matrix printers typically have the capability of reproducing ``raster-graphics'' images. Three new numeric capabilities and three new string capabilities can help a program draw raster-graphics images independent of the type of dot-matrix printer or the number of pins or dots the printer can handle at one time.

    Dot-Matrix Graphics
        npins   Number of pins, N, in print-head
        spinv   Spacing of pins vertically in pins per inch
        spinh   Spacing of dots horizontally in dots per inch
        porder  Matches software bits to print-head pins
        sbim    Start printing bit image graphics, B bits wide
        rbim    End printing bit image graphics

    The sbim sring is used with a single argument, B, the width of the image in dots.

    The model of dot-matrix or raster-graphics that terminfo presents is similar to the technique used for most dot-matrix printers: each pass of the printer's print-head is assumed to produce a dot-matrix that is N dots high and B dots wide. This is typically a wide, squat, rectangle of dots. The height of this rectangle in dots will vary from one printer to the next; this is given in the npins numeric capability. The size of the rectangle in fractions of an inch will also vary; it can be deduced from the spinv and spinh numeric capabilities. With these three values an application can divide a complete raster-graphics image into several horizontal strips, perhaps interpolating to account for different dot spacing vertically and horizontally.

    The sbim and rbim strings are used to start and end a dot-matrix image, respectively. The sbim string is used with a single argument that gives the width of the dot-matrix in dots. A sequence of ``image-data bytes'' are sent to the printer after the sbim string and before the rbim string. The number of bytes is a integral multiple of the width of the dot-matrix; the multiple and the form of each byte is determined by the porder string as described below.

    The porder string is a comma separated list of pin numbers optionally followed by an numerical offset. The offset, if given, is separated from the list with a semicolon. The position of each pin number in the list corresponds to a bit in an 8-bit data byte. The pins are numbered consecutively from 1 to npins, with 1 being the top pin. Note that the term ``pin'' is used loosely here; ``ink-jet'' dot-matrix printers don't have pins, but can be considered to have an equivalent method of applying a single dot of ink to paper. The bit positions in porder are in groups of 8, with the first position in each group the most significant bit and the last position the least significant bit. An application produces 8-bit bytes in the order of the groups in porder.

    An application computes the ``image-data bytes'' from the internal image, mapping vertical dot positions in each print-head pass into 8-bit bytes, using a 1 bit where ink should be applied and 0 where no ink should be applied. This can be reversed (0 bit for ink, 1 bit for no ink) by giving a negative pin number. If a position is skipped in porder, a 0 bit is used. If a position has a lower case `x' instead of a pin number, a 1 bit is used in the skipped position. For consistency, a lower case `o' can be used to represent a 0 filled, skipped bit. There must be a multiple of 8 bit positions used or skipped in porder; if not, 0 bits are used to fill the last byte in the least significant bits. The offset, if given, is added to each data byte; the offset can be negative.

    Some examples may help clarify the use of the porder string. The AT&T 470, AT&T 475 and C.Itoh 8510 printers provide eight pins for graphics. The pins are identified top to bottom by the 8 bits in a byte, from least significant to most. The porder strings for these printers would be 8,7,6,5,4,3,2,1. The AT&T 478 and AT&T 479 printers also provide eight pins for graphics. However, the pins are identified in the reverse order. The porder strings for these printers would be 1,2,3,4,5,6,7,8. The AT&T 5310, AT&T 5320, DEC LA100, and DEC LN03 printers provide six pins for graphics. The pins are identified top to bottom by the decimal values 1, 2, 4, 8, 16 and 32. These correspond to the low six bits in an 8-bit byte, although the decimal values are further offset by the value 63. The porder string for these printers would be ,,6,5,4,3,2,1;63, or alternately o,o,6,5,4,3,2,1;63.  

    Section 2-7: Effect of Changing Printing Resolution

    If the control sequences to change the character pitch or the line pitch are used, the pin or dot spacing may change:

        Dot-Matrix Graphics
        Changing the Character/Line Pitches
        cpi     Change character pitch
        cpix    If set, cpi changes spinh
        lpi     Change line pitch
        lpix    If set, lpi changes spinv

    Programs that use cpi or lpi should recalculate the dot spacing:

    Dot-Matrix Graphics
        Effects of Changing the Character/Line Pitches
        Before               After
    Using cpi with cpix clear:
    $bold spinh '$    $bold spinh$
    Using cpi with cpix set:
    $bold spinh '$    $bold spinh = bold spinh ' cdot bold orhi over 
                             { bold {orhi '} }$
    Using lpi with lpix clear:
    $bold spinv '$    $bold spinv$
    Using lpi with lpix set:
    $bold spinv '$    $bold spinv = bold {spinv '} cdot bold orhi over 
                             { bold {orhi '}}$
    Using chr:
    $bold spinh '$    $bold spinh$
    Using cvr:
    $bold spinv '$    $bold spinv$

    orhi' and orhi are the values of the horizontal resolution in steps per inch, before using cpi and after using cpi, respectively. Likewise, orvi' and orvi are the values of the vertical resolution in steps per inch, before using lpi and after using lpi, respectively. Thus, the changes in the dots per inch for dot-matrix graphics follow the changes in steps per inch for printer resolution.  

    Section 2-8: Print Quality

    Many dot-matrix printers can alter the dot spacing of printed text to produce near ``letter quality'' printing or ``draft quality'' printing. Usually it is important to be able to choose one or the other because the rate of printing generally falls off as the quality improves. There are three new strings used to describe these capabilities.

    Print Quality
        snlq    Set near-letter quality print
        snrmq   Set normal quality print
        sdrfq   Set draft quality print

    The capabilities are listed in decreasing levels of quality. If a printer doesn't have all three levels, one or two of the strings should be left blank as appropriate.  

    Section 2-9: Printing Rate and Buffer Size

    Because there is no standard protocol that can be used to keep a program synchronized with a printer, and because modern printers can buffer data before printing it, a program generally cannot determine at any time what has been printed. Two new numeric capabilities can help a program estimate what has been printed.

    Print Rate/Buffer Size
        cps     Nominal print rate in characters per second
        bufsz   Buffer capacity in characters

    cps is the nominal or average rate at which the printer prints characters; if this value is not given, the rate should be estimated at one-tenth the prevailing baud rate. bufsz is the maximum number of subsequent characters buffered before the guaranteed printing of an earlier character, assuming proper flow control has been used. If this value is not given it is assumed that the printer does not buffer characters, but prints them as they are received.

    As an example, if a printer has a 1000-character buffer, then sending the letter ``a'' followed by 1000 additional characters is guaranteed to cause the letter ``a'' to print. If the same printer prints at the rate of 100 characters per second, then it should take 10 seconds to print all the characters in the buffer, less if the buffer is not full. By keeping track of the characters sent to a printer, and knowing the print rate and buffer size, a program can synchronize itself with the printer.

    Note that most printer manufacturers advertise the maximum print rate, not the nominal print rate. A good way to get a value to put in for cps is to generate a few pages of text, count the number of printable characters, and then see how long it takes to print the text.

    Applications that use these values should recognize the variability in the print rate. Straight text, in short lines, with no embedded control sequences will probably print at close to the advertised print rate and probably faster than the rate in cps. Graphics data with a lot of control sequences, or very long lines of text, will print at well below the advertised rate and below the rate in cps. If the application is using cps to decide how long it should take a printer to print a block of text, the application should pad the estimate. If the application is using cps to decide how much text has already been printed, it should shrink the estimate. The application will thus err in favor of the user, who wants, above all, to see all the output in its correct place.  



    compiled terminal description database


    subset of compiled terminal description database


    tab settings for some terminals, in a format appropriate to be output to the terminal (escape sequences that set margins and tabs)



    ls(1), pg(1), stty(1), tput(1), tty(1), vi(1), infocmp(1M), tic(1M), printf(3C), curses(3CURSES), curses(3XCURSES)  


    The most effective way to prepare a terminal description is by imitating the description of a similar terminal in terminfo and to build up a description gradually, using partial descriptions with a screen oriented editor, such as vi, to check that they are correct. To easily test a new terminal description the environment variable TERMINFO can be set to the pathname of a directory containing the compiled description, and programs will look there rather than in /usr/share/lib/terminfo.



    Sample Entry
    Types of Capabilities in the Sample Entry
    Preparing Descriptions
    Section 1-1: Basic Capabilities
    Section 1-2: Parameterized Strings
    Section 1-3: Cursor Motions
    Section 1-4: Area Clears
    Section 1-5: Insert/Delete Line
    Section 1-6: Insert/Delete Character
    Section 1-7: Highlighting, Underlining, and Visible Bells
    Section 1-8: Keypad
    Section 1-9: Tabs and Initialization
    Section 1-10: Delays
    Section 1-11: Status Lines
    Section 1-12: Line Graphics
    Section 1-13: Color Manipulation
    Section 1-14: Miscellaneous
    Section 1-15: Special Cases
    Section 1-16: Similar Terminals
    Section 2-1: Rounding Values
    Section 2-2: Printer Resolution
    Section 2-3: Specifying Printer Resolution
    Section 2-4: Capabilities that Cause Movement
    Shadows, Italics, Wide Characters
    Section 2-5: Alternate Character Sets
    Section 2-6: Dot-Matrix Graphics
    Section 2-7: Effect of Changing Printing Resolution
    Section 2-8: Print Quality
    Section 2-9: Printing Rate and Buffer Size

    Поиск по тексту MAN-ов: 

    Inferno Solutions
    Hosting by

    Закладки на сайте
    Проследить за страницей
    Created 1996-2024 by Maxim Chirkov
    Добавить, Поддержать, Вебмастеру