The OpenNET Project / Index page

[ новости /+++ | форум | wiki | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 ТемаНаборКатегория 
 
 [Cписок руководств | Печать]

pgsql_table (5)
  • >> pgsql_table (5) ( Разные man: Форматы файлов )
  •  

    NAME

    pgsql_table
    -
    Postfix PostgreSQL client configuration
     
    

    SYNOPSIS

    postmap -q "string" pgsql:/etc/postfix/filename
    
    postmap -q - pgsql:/etc/postfix/filename <inputfile
    
     

    DESCRIPTION

    The Postfix mail system uses optional tables for address rewriting or mail routing. These tables are usually in dbm or db format.

    Alternatively, lookup tables can be specified as PostgreSQL databases. In order to use PostgreSQL lookups, define a PostgreSQL source as a lookup table in main.cf, for example:
         alias_maps = pgsql:/etc/pgsql-aliases.cf

    The file /etc/postfix/pgsql-aliases.cf has the same format as the Postfix main.cf file, and can specify the parameters described below.  

    BACKWARDS COMPATIBILITY

    
    
    For compatibility with other Postfix lookup tables, PostgreSQL
    parameters can also be defined in main.cf.  In order to do
    that, specify as PostgreSQL source a name that doesn't begin
    with a slash or a dot.  The PostgreSQL parameters will then
    be accessible as the name you've given the source in its
    definition, an underscore, and the name of the parameter.  For
    example, if the map is specified as "pgsql:pgsqlname",
    the parameter "hosts" below would be defined in main.cf as
    "pgsqlname_hosts".
    

    Note: with this form, the passwords for the PostgreSQL sources are written in main.cf, which is normally world-readable. Support for this form will be removed in a future Postfix version.

    Postfix 2.2 has enhanced query interfaces for MySQL and PostgreSQL, these include features previously available only in the Postfix LDAP client. In the new interface the SQL query is specified via a single query parameter (described in more detail below). In Postfix 2.1 the parameter precedence was, from highest to lowest, select_function, query and finally select_field, ...

    With Postfix 2.2 the query parameter has highest precedence, and is used in preference to the still supported, but slated to be phased out, select_function, select_field, table, where_field and additional_conditions parameters. To migrate to the new interface set:


         query = SELECT select_function('%s')

    or in the absence of selection_function, the lower precedence:


         query = SELECT select_field
             FROM table
             WHERE where_field = '%s'
                 additional_conditions

    Use the value, not the name, of each legacy parameter. Note that the additional_conditions parameter is optional and if not empty, will always start with AND.  

    LIST MEMBERSHIP

    
    
    When using SQL to store lists such as $mynetworks,
    $mydestination, $relay_domains, $local_recipient_maps,
    etc., it is important to understand that the table must
    store each list member as a separate key. The table lookup
    verifies the *existence* of the key. See "Postfix lists
    versus tables" in the DATABASE_README document for a
    discussion.
    

    Do NOT create tables that return the full list of domains in $mydestination or $relay_domains etc., or IP addresses in $mynetworks.

    DO create tables with each matching item as a key and with an arbitrary value. With SQL databases it is not uncommon to return the key itself or a constant value.  

    PGSQL PARAMETERS

    
    
    
    hosts
    The hosts that Postfix will try to connect to and query from. Specify unix: for UNIX-domain sockets, inet: for TCP connections (default). Example:
         hosts = host1.some.domain host2.some.domain
         hosts = unix:/file/name

    The hosts are tried in random order, with all connections over UNIX domain sockets being tried before those over TCP. The connections are automatically closed after being idle for about 1 minute, and are re-opened as necessary.

    NOTE: the unix: and inet: prefixes are accepted for backwards compatibility reasons, but are actually ignored. The PostgreSQL client library will always try to connect to an UNIX socket if the name starts with a slash, and will try a TCP connection otherwise.

    user, password
    The user name and password to log into the pgsql server. Example: user = someone
    password = some_password
    dbname
    The database name on the servers. Example:
         dbname = customer_database
    query
    The SQL query template used to search the database, where %s is a substitute for the address Postfix is trying to resolve, e.g.
         query = SELECT replacement FROM aliases WHERE mailbox = '%s'

    This parameter supports the following '%' expansions:

    %%
    This is replaced by a literal '%' character. (Postfix 2.2 and later)
    %s
    This is replaced by the input key. SQL quoting is used to make sure that the input key does not add unexpected metacharacters.
    %u
    When the input key is an address of the form user@domain, %u is replaced by the SQL quoted local part of the address. Otherwise, %u is replaced by the entire search string. If the localpart is empty, the query is suppressed and returns no results.
    %d
    When the input key is an address of the form user@domain, %d is replaced by the SQL quoted domain part of the address. Otherwise, the query is suppressed and returns no results.
    %[SUD]
    The upper-case equivalents of the above expansions behave in the query parameter identically to their lower-case counter-parts. With the result_format parameter (see below), they expand the input key rather than the result value.
    The above %S, %U and %D expansions are available with Postfix 2.2 and later
    %[1-9]
    The patterns %1, %2, ... %9 are replaced by the corresponding most significant component of the input key's domain. If the input key is user@mail.example.com, then %1 is com, %2 is example and %3 is mail. If the input key is unqualified or does not have enough domain components to satisfy all the specified patterns, the query is suppressed and returns no results.
    The above %1, ... %9 expansions are available with Postfix 2.2 and later
    The domain parameter described below limits the input keys to addresses in matching domains. When the domain parameter is non-empty, SQL queries for unqualified addresses or addresses in non-matching domains are suppressed and return no results.

    The precedence of this parameter has changed with Postfix 2.2, in prior releases the precedence was, from highest to lowest, select_function, query, select_field, ...

    With Postfix 2.2 the query parameter has highest precedence, see COMPATIBILITY above.

    NOTE: DO NOT put quotes around the query parameter.

    result_format (default: %s)
    Format template applied to result attributes. Most commonly used to append (or prepend) text to the result. This parameter supports the following '%' expansions:
    %%
    This is replaced by a literal '%' character.
    %s
    This is replaced by the value of the result attribute. When result is empty it is skipped.
    %u
    When the result attribute value is an address of the form user@domain, %u is replaced by the local part of the address. When the result has an empty localpart it is skipped.
    %d
    When a result attribute value is an address of the form user@domain, %d is replaced by the domain part of the attribute value. When the result is unqualified it is skipped.
    %[SUD1-9]
    The upper-case and decimal digit expansions interpolate the parts of the input key rather than the result. Their behavior is identical to that described with query, and in fact because the input key is known in advance, queries whose key does not contain all the information specified in the result template are suppressed and return no results.
    For example, using "result_format = smtp:[%s]" allows one to use a mailHost attribute as the basis of a transport(5) table. After applying the result format, multiple values are concatenated as comma separated strings. The expansion_limit and parameter explained below allows one to restrict the number of values in the result, which is especially useful for maps that must return at most one value.

    The default value %s specifies that each result value should be used as is.

    This parameter is available with Postfix 2.2 and later.

    NOTE: DO NOT put quotes around the result format!

    domain (default: no domain list)
    This is a list of domain names, paths to files, or dictionaries. When specified, only fully qualified search keys with a *non-empty* localpart and a matching domain are eligible for lookup: 'user' lookups, bare domain lookups and "@domain" lookups are not performed. This can significantly reduce the query load on the PostgreSQL server.
         domain = postfix.org, hash:/etc/postfix/searchdomains

    It is best not to use SQL to store the domains eligible for SQL lookups.

    This parameter is available with Postfix 2.2 and later.

    NOTE: DO NOT define this parameter for local(8) aliases, because the input keys are always unqualified.

    expansion_limit (default: 0)
    A limit on the total number of result elements returned (as a comma separated list) by a lookup against the map. A setting of zero disables the limit. Lookups fail with a temporary error if the limit is exceeded. Setting the limit to 1 ensures that lookups do not return multiple values.

    Pre-Postfix 2.2 legacy interfaces:

    select_function
    This parameter specifies a database function name. Example:
         select_function = my_lookup_user_alias

    This is equivalent to:
         query = SELECT my_lookup_user_alias('%s')

    This parameter overrides the legacy table-related fields (described below). With Postfix versions prior to 2.2, it also overrides the query parameter. Starting with Postfix 2.2, the query parameter has highest precedence, and this parameter is deprecated. Please migrate to the new query interface as this interface is slated to be phased out.

    The following parameters (with lower precedence than the select_function interface described above) can be used to build the SQL select statement as follows:


         SELECT [select_field]
         FROM [table]
         WHERE [where_field] = '%s'
               [additional_conditions]

    The specifier %s is replaced with each lookup by the lookup key and is escaped so if it contains single quotes or other odd characters, it will not cause a parse error, or worse, a security problem.

    Starting with Postfix 2.2, this interface is obsoleted by the more general query interface described above. If higher precedence the query or select_function parameters described above are defined, these parameters are ignored. Please migrate to the new query interface as this interface is slated to be phased out.

    select_field
    The SQL "select" parameter. Example:
         select_field = forw_addr
    table
    The SQL "select .. from" table name. Example:
         table = mxaliases
    where_field
    The SQL "select .. where" parameter. Example:
         where_field = alias
    additional_conditions
    Additional conditions to the SQL query. Example:
         additional_conditions = AND status = 'paid'
     

    SEE ALSO

    postmap(1), Postfix lookup table manager
    postconf(5), configuration parameters
    ldap_table(5), LDAP lookup tables
    mysql_table(5), MySQL lookup tables
    
     

    README FILES

    
    
    Use "postconf readme_directory" or
    "postconf html_directory" to locate this information.
    
    
    DATABASE_README, Postfix lookup table overview
    PGSQL_README, Postfix PostgreSQL client guide
    
     

    LICENSE

    
    
    The Secure Mailer license must be distributed with this software.
     
    

    HISTORY

    PgSQL support was introduced with Postfix version 2.1.
    
     

    AUTHOR(S)

    Based on the MySQL client by:
    Scott Cotton, Joshua Marcus
    IC Group, Inc.
    
    Ported to PostgreSQL by:
    Aaron Sethman
    
    Further enhanced by:
    Liviu Daia
    Institute of Mathematics of the Romanian Academy
    P.O. BOX 1-764
    RO-014700 Bucharest, ROMANIA
    
    

     

    Index

    NAME
    SYNOPSIS
    DESCRIPTION
    BACKWARDS COMPATIBILITY
    LIST MEMBERSHIP
    PGSQL PARAMETERS
    SEE ALSO
    README FILES
    LICENSE
    HISTORY
    AUTHOR(S)


    Поиск по тексту MAN-ов: 




    Спонсоры:
    PostgresPro
    Inferno Solutions
    Hosting by Hoster.ru
    Хостинг:

    Закладки на сайте
    Проследить за страницей
    Created 1996-2022 by Maxim Chirkov
    Добавить, Поддержать, Вебмастеру