The OpenNET Project / Index page

[ новости /+++ | форум | wiki | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 ТемаНаборКатегория 
 
 [Cписок руководств | Печать]

gvinum (8)
  • >> gvinum (8) ( FreeBSD man: Команды системного администрирования )

  • BSD mandoc
     

    NAME

    
    
    gvinum
    
     - Logical Volume Manager control program
    
     
    

    SYNOPSIS

    [command ] [-options ]  

    COMMANDS

    checkparity [-f plex ]
    Check the parity blocks of a RAID-5 plex. The parity check will start at the beginning of the plex if the -f flag is specified, or otherwise at the location of the parity check pointer, the first location at which plex's parity is incorrect. All subdisks in the plex must be up for a parity check.
    create [description-file ]
    Create a volume as described in description-file If no description-file provided, opens an editor and provides the current configuration for editing.
    help
    Provides a synopsis of commands and arguments.
    l | list [-rvV [volume | plex | subdisk ] ]
    ld [-rvV [drive ... ] ]
    ls [-rvV [subdisk ... ] ]
    lp [-rvV [plex ... ] ]
    lv [-rvV [volume ... ] ]
    List information about the relevant object(s). The -r flag provides recursive display, showing each object's subordinate objects in proper relation. The -v and -V flags provide progressively more detailed output.
    move | mv -f drive subdisk [... ]
    Move the subdisk(s) to the specified drive. The -f flag is required, as all data on the indicated subdisk(s) will be destroyed as part of the move. This can currently only be done when the subdisk is not being accessed.

    If the subdisk(s) form part of a RAID-5 plex, the disk(s) will need to be set to the ``up'' state and the plex will require a rebuildparity command; if the subdisk(s) form part of a plex that is mirrored with other plexes, the plex will require restarting and will sync once restarted. Moving more than one subdisk in a RAID-5 plex or subdisks from both sides of a mirrored plex volume will destroy data. Note that parity rebuilds and syncing must be started manually after a move.

    printconfig
    Write a copy of the current configuration to standard output.
    quit
    Exit when running in interactive mode. Normally this would be done by entering the EOF character.
    rename [-r drive | subdisk | plex | volume newname ]
    Change the name of the specified object. The -r flag will recursively rename subordinate objects.

    Note that device nodes will not be renamed until is restarted.

    rebuildparity [-f plex ]
    Rebuild the parity blocks of a RAID-5 plex. The parity rebuild will start at the beginning of the plex if the -f flag is specified, or otherwise at the location of the parity check pointer. All subdisks in the plex must be up for a parity check.
    resetconfig
    Reset the complete configuration.
    rm [-r volume | plex | subdisk ]
    Remove an object and, if -r is specified, its subordinate objects.
    saveconfig
    Save configuration to disk after configuration failures.
    setstate [-f state volume | plex | subdisk | drive ]
    Set state without influencing other objects, for diagnostic purposes only. The -f flag forces state changes regardless of whether they are legal.
    start
    Read configuration from all vinum drives.
    start [-S size volume | plex | subdisk ]
    Allow the system to access the objects. The -S flag is currently ignored.

     

    DESCRIPTION

    The utility communicates with the kernel component of the GVinum logical volume manager. It is designed either for interactive use, when started without command line arguments, or to execute a single command if the command is supplied on the command line. In interactive mode, maintains a command line history.  

    OPTIONS

    The commands may be followed by an option.

    -f
    The -f (``force'' ) option overrides safety checks. It should be used with extreme caution. This option is required in order to use the move command.
    -r
    The -r (``recursive'' ) option applies the command recursively to subordinate objects. For example, in conjunction with the lv command, the -r option will also show information about the plexes and subdisks belonging to the volume. It is also used by the rename command to indicate that subordinate objects such as subdisks should be renamed to match the object(s) specified and by the rm command to delete plexes belonging to a volume and so on.
    -v
    The -v (``verbose'' ) option provides more detailed output.
    -V
    The -V (``very verbose'' ) option provides even more detailed output than -v

     

    ENVIRONMENT

    EDITOR
    The name of the editor to use for editing configuration files, by default vi(1) is invoked.

     

    FILES

    /dev/gvinum
    directory with device nodes for objects
    /dev/gvinum/plex
    directory containing device nodes for plexes
    /dev/gvinum/sd
    directory containing device nodes for subdisks

     

    SEE ALSO

    geom(4), geom(8)  

    HISTORY

    The utility first appeared in Fx 5.3 . The vinum utility, on which is based, was written by An Greg Lehey .

    The utility was written by An Lukas Ertl . The move and rename commands and documentation were added by An Chris Jones through the 2005 Google Summer of Code program.  

    AUTHORS

    An Lukas Ertl Aq le@FreeBSD.org An Chris Jones Aq soc-cjones@FreeBSD.org  

    BUGS

    Currently, does not rename devices in /dev/gvinum until reloaded.

    The -S initsize flag to start is ignored.

    The stop command does not work.

    Moving subdisks that are not part of a mirrored or RAID-5 volume will destroy data. It is perhaps a bug to permit this.

    Plexes in which subdisks have been moved do not automatically sync or rebuild parity. This may leave data unprotected and is perhaps unwise.

    Currently, does not yet fully implement all of the functions found in vinum(4). Specifically, the following commands from vinum(4) are not supported:

    attach plex volume [rename ]
    attach subdisk plex [offset [rename ] ]
    Attach a plex to a volume, or a subdisk to a plex.
    concat [-fv [-n name drives ] ]
    Create a concatenated volume from the specified drives.
    debug
    Cause the volume manager to enter the kernel debugger.
    debug flags
    Set debugging flags.
    detach [-f [plex | subdisk ] ]
    Detach a plex or subdisk from the volume or plex to which it is attached.
    dumpconfig [drive ... ]
    List the configuration information stored on the specified drives, or all drives in the system if no drive names are specified.
    info [-vV ]
    List information about volume manager state.
    label volume
    Create a volume label.
    mirror [-fsv [-n name drives ] ]
    Create a mirrored volume from the specified drives.
    resetstats [-r [volume | plex | subdisk ] ]
    Reset statistics counters for the specified objects, or for all objects if none are specified.
    setdaemon [value ]
    Set daemon configuration.
    stop [-f [volume | plex | subdisk ] ]
    Terminate access to the objects, or stop if no parameters are specified.
    stripe [-fv [-n name drives ] ]
    Create a striped volume from the specified drives.


     

    Index

    NAME
    SYNOPSIS
    COMMANDS
    DESCRIPTION
    OPTIONS
    ENVIRONMENT
    FILES
    SEE ALSO
    HISTORY
    AUTHORS
    BUGS


    Поиск по тексту MAN-ов: 




    Спонсоры:
    PostgresPro
    Inferno Solutions
    Hosting by Hoster.ru
    Хостинг:

    Закладки на сайте
    Проследить за страницей
    Created 1996-2023 by Maxim Chirkov
    Добавить, Поддержать, Вебмастеру