The OpenNET Project / Index page

[ новости /+++ | форум | wiki | теги | ]

форумы  помощь  поиск  регистрация  майллист  ВХОД  слежка  RSS
"Proxy Squid"
Вариант для распечатки Архивированная нить - только для чтения! 
Пред. тема | След. тема 
Форумы OpenNET: Виртуальная конференция (Public)
Изначальное сообщение [Проследить за развитием треда]

"Proxy Squid"
Сообщение от Marshrut emailИскать по авторуВ закладки on 03-Мрт-03, 14:37  (MSK)
Доброе время суток.Помогите плиз!!!Падает прокси.. интересное явление чем больше юзеров добавляю- тем быстрее падает процес. Стоит РН 72 . железо Целерон 1.1 Ггц память 512 М. ГДЕ КОПАТЬ?? Посоветуйте что нужно сделать?
У когото была такая проблема? Сейчас на сквиде висит 30 юзеров. Сервис падает 2 раза в месяц - стабильно...
  Рекомендовать в FAQ | Cообщить модератору | Наверх

 Оглавление

Индекс форумов | Темы | Пред. тема | След. тема
Сообщения по теме

1. "RE: Proxy Squid"
Сообщение от ilya emailИскать по авторуВ закладки on 03-Мрт-03, 15:46  (MSK)
>Доброе время суток.Помогите плиз!!!Падает прокси.. интересное явление чем больше юзеров добавляю- тем
>быстрее падает процес. Стоит РН 72 . железо Целерон 1.1 Ггц
>память 512 М. ГДЕ КОПАТЬ?? Посоветуйте что нужно сделать?
>У когото была такая проблема? Сейчас на сквиде висит 30 юзеров. Сервис
>падает 2 раза в месяц - стабильно...

а редиректы или аутентификация пользуются?

  Рекомендовать в FAQ | Cообщить модератору | Наверх

2. "RE: Proxy Squid"
Сообщение от vadblm emailИскать по авторуВ закладки on 03-Мрт-03, 15:59  (MSK)
>Доброе время суток.Помогите плиз!!!Падает прокси.. интересное явление чем больше юзеров добавляю- тем
>быстрее падает процес. Стоит РН 72 . железо Целерон 1.1 Ггц
>память 512 М. ГДЕ КОПАТЬ?? Посоветуйте что нужно сделать?
>У когото была такая проблема? Сейчас на сквиде висит 30 юзеров. Сервис
>падает 2 раза в месяц - стабильно...
squid.conf хотелось бы увидеть

  Рекомендовать в FAQ | Cообщить модератору | Наверх

3. "RE: Proxy Squid"
Сообщение от Rustam Искать по авторуВ закладки on 03-Мрт-03, 18:40  (MSK)
Rotate Логи
squid -k rotate.
  Рекомендовать в FAQ | Cообщить модератору | Наверх

4. "RE: Proxy Squid"
Сообщение от Marshrut emailИскать по авторуВ закладки on 03-Мрт-03, 19:18  (MSK)
>>Доброе время суток.Помогите плиз!!!Падает прокси.. интересное явление чем больше юзеров добавляю- тем
>>быстрее падает процес. Стоит РН 72 . железо Целерон 1.1 Ггц
>>память 512 М. ГДЕ КОПАТЬ?? Посоветуйте что нужно сделать?
>>У когото была такая проблема? Сейчас на сквиде висит 30 юзеров. Сервис
>>падает 2 раза в месяц - стабильно...
>squid.conf хотелось бы увидеть

смотри..

# WELCOME TO SQUID 2
# ------------------
#
# This is the default Squid configuration file. You may wish
# to look at the Squid home page (http://www.squid-cache.org/)
# for the FAQ and other documentation.
#
# The default Squid config file shows what the defaults for
# various options happen to be.  If you don't need to change the
# default, you shouldn't uncomment the line.  Doing so may cause
# run-time problems.  In some cases "none" refers to no default
# setting at all, while in other cases it refers to a valid
# option - the comments for that keyword indicate if this is the
# case.
#


# NETWORK OPTIONS
# -----------------------------------------------------------------------------

#  TAG: http_port
# Usage: port
# hostname:port
# 1.2.3.4:port
#
# The socket addresses where Squid will listen for HTTP client
# requests.  You may specify multiple socket addresses.
# There are three forms: port alone, hostname with port, and
# IP address with port.  If you specify a hostname or IP
# address, then Squid binds the socket to that specific
# address.  This replaces the old 'tcp_incoming_address'
# option.  Most likely, you do not need to bind to a specific
# address, so you can use the port number alone.
#
# The default port number is 3128.
#
# If you are running Squid in accelerator mode, then you
# probably want to listen on port 80 also, or instead.
#
# The -a command line option will override the *first* port
# address, however.
#
# You may specify multiple socket addresses on multiple lines.
#
#Default:
# http_port 3128

#  TAG: icp_port
# The port number where Squid sends and receives ICP queries to
# and from neighbor caches.  Default is 3130.  To disable use
# "0".  May be overridden with -u on the command line.
#
#Default:
# icp_port 3130

#  TAG: htcp_port
# The port number where Squid sends and receives HTCP queries to
# and from neighbor caches.  Default is 4827.  To disable use
# "0".
#
# To enable this option, you must use --enable-htcp with the
# configure script.
#
#Default:
# htcp_port 4827

#  TAG: mcast_groups
# This tag specifies a list of multicast groups which your server
# should join to receive multicasted ICP queries.
#
# NOTE!  Be very careful what you put here!  Be sure you
# understand the difference between an ICP _query_ and an ICP
# _reply_.  This option is to be set only if you want to RECEIVE
# multicast queries.  Do NOT set this option to SEND multicast
# ICP (use cache_peer for that).  ICP replies are always sent via
# unicast, so this option does not affect whether or not you will
# receive replies from multicast group members.
#
# You must be very careful to NOT use a multicast address which
# is already in use by another group of caches.
#
# If you are unsure about multicast, please read the Multicast
# chapter in the Squid FAQ (http://www.squid-cache.org/FAQ/).
#
# Usage: mcast_groups 239.128.16.128 224.0.1.20
#
# By default, Squid doesn't listen on any multicast groups.
#
#Default:
# none

#  TAG: tcp_outgoing_address
#  TAG: udp_incoming_address
#  TAG: udp_outgoing_address
# Usage: tcp_incoming_address 10.20.30.40
#        udp_outgoing_address fully.qualified.domain.name
#
# tcp_outgoing_address is used for connections made to remote
# servers and other caches.
# udp_incoming_address is used for the ICP socket receiving packets
# from other caches.
# udp_outgoing_address is used for ICP packets sent out to other
# caches.
#
# The default behavior is to not bind to any specific address.
#
# A *_incoming_address value of 0.0.0.0 indicates that Squid should
# listen on all available interfaces.
#
# If udp_outgoing_address is set to 255.255.255.255 (the default)
# then it will use the same socket as udp_incoming_address. Only
# change this if you want to have ICP queries sent using another
# address than where this Squid listens for ICP queries from other
# caches.
#
# NOTE, udp_incoming_address and udp_outgoing_address can not
# have the same value since they both use port 3130.
#
# NOTE, tcp_incoming_address has been removed.  You can now
# specify IP addresses on the 'http_port' line.
#
#Default:
# tcp_outgoing_address 255.255.255.255
# udp_incoming_address 0.0.0.0
# udp_outgoing_address 255.255.255.255


# OPTIONS WHICH AFFECT THE NEIGHBOR SELECTION ALGORITHM
# -----------------------------------------------------------------------------

#  TAG: cache_peer
# To specify other caches in a hierarchy, use the format:
#
# cache_peer hostname type http_port icp_port
#
# For example,
#
# #                                        proxy  icp
# #          hostname             type     port   port  options
# #          -------------------- -------- ----- -----  -----------
# cache_peer parent.foo.net       parent    3128  3130  [proxy-only]
# cache_peer sib1.foo.net         sibling   3128  3130  [proxy-only]
# cache_peer sib2.foo.net         sibling   3128  3130  [proxy-only]
#
#       type:  either 'parent', 'sibling', or 'multicast'.
#
# proxy_port:  The port number where the cache listens for proxy
#      requests.
#
#   icp_port:  Used for querying neighbor caches about
#      objects.  To have a non-ICP neighbor
#      specify '7' for the ICP port and make sure the
#      neighbor machine has the UDP echo port
#      enabled in its /etc/inetd.conf file.
#
#     options: proxy-only
#      weight=n
#      ttl=n
#      no-query
#      default
#      round-robin
#      multicast-responder
#      closest-only
#      no-digest
#      no-netdb-exchange
#      no-delay
#      login=user:password
#      connect-timeout=nn
#      digest-url=url
#      allow-miss
#
#      use 'proxy-only' to specify that objects fetched
#      from this cache should not be saved locally.
#
#      use 'weight=n' to specify a weighted parent.
#      The weight must be an integer.  The default weight
#      is 1, larger weights are favored more.
#
#      use 'ttl=n' to specify a IP multicast TTL to use
#      when sending an ICP queries to this address.
#      Only useful when sending to a multicast group.
#      Because we don't accept ICP replies from random
#      hosts, you must configure other group members as
#      peers with the 'multicast-responder' option below.
#
#      use 'no-query' to NOT send ICP queries to this
#      neighbor.
#
#      use 'default' if this is a parent cache which can
#      be used as a "last-resort." You should probably
#      only use 'default' in situations where you cannot
#      use ICP with your parent cache(s).
#
#      use 'round-robin' to define a set of parents which
#      should be used in a round-robin fashion in the
#      absence of any ICP queries.
#
#      'multicast-responder' indicates that the named peer
#      is a member of a multicast group.  ICP queries will
#      not be sent directly to the peer, but ICP replies
#      will be accepted from it.
#
#      'closest-only' indicates that, for ICP_OP_MISS
#      replies, we'll only forward CLOSEST_PARENT_MISSes
#      and never FIRST_PARENT_MISSes.
#
#      use 'no-digest' to NOT request cache digests from
#      this neighbor.
#
#      'no-netdb-exchange' disables requesting ICMP
#      RTT database (NetDB) from the neighbor.
#
#      use 'no-delay' to prevent access to this neighbor
#      from influencing the delay pools.
#
#      use 'login=user:password' if this is a personal/workgroup
#      proxy and your parent requires proxy authentication.
#
#      use 'connect-timeout=nn' to specify a peer
#      specific connect timeout (also see the
#      peer_connect_timeout directive)
#
#      use 'digest-url=url' to tell Squid to fetch the cache
#      digest (if digests are enabled) for this host from
#      the specified URL rather than the Squid default
#      location.
#
#      use 'allow-miss' to disable Squid's use of only-if-cached
#      when forwarding requests to siblings. This is primarily
#      useful when icp_hit_stale is used by the sibling. To
#      extensive use of this option may result in forwarding
#      loops, and you should avoid having two-way peerings
#      with this option. (for example to deny peer usage on
#      requests from peer by denying cache_peer_access if the
#      source is a peer)
#
# NOTE: non-ICP neighbors must be specified as 'parent'.
#
#Default:
# none

#  TAG: cache_peer_domain
# Use to limit the domains for which a neighbor cache will be
# queried.  Usage:
#
# cache_peer_domain cache-host domain [domain ...]
# cache_peer_domain cache-host !domain
#
# For example, specifying
#
# cache_peer_domain parent.foo.net .edu
#
# has the effect such that UDP query packets are sent to
# 'bigserver' only when the requested object exists on a
# server in the .edu domain.  Prefixing the domainname
# with '!' means that the cache will be queried for objects
# NOT in that domain.
#
# NOTE: * Any number of domains may be given for a cache-host,
#   either on the same or separate lines.
# * When multiple domains are given for a particular
#   cache-host, the first matched domain is applied.
# * Cache hosts with no domain restrictions are queried
#   for all requests.
# * There are no defaults.
# * There is also a 'cache_peer_access' tag in the ACL
#   section.
#
#Default:
# none

#  TAG: neighbor_type_domain
# usage: neighbor_type_domain parent|sibling domain domain ...
#
# Modifying the neighbor type for specific domains is now
# possible.  You can treat some domains differently than the the
# default neighbor type specified on the 'cache_peer' line.
# Normally it should only be necessary to list domains which
# should be treated differently because the default neighbor type
# applies for hostnames which do not match domains listed here.
#
#EXAMPLE:
# cache_peer  parent cache.foo.org 3128 3130
# neighbor_type_domain cache.foo.org sibling .com .net
# neighbor_type_domain cache.foo.org sibling .au .de
#
#Default:
# none

#  TAG: icp_query_timeout (msec)
# Normally Squid will automatically determine an optimal ICP
# query timeout value based on the round-trip-time of recent ICP
# queries.  If you want to override the value determined by
# Squid, set this 'icp_query_timeout' to a non-zero value.  This
# value is specified in MILLISECONDS, so, to use a 2-second
# timeout (the old default), you would write:
#
# icp_query_timeout 2000
#
#Default:
# icp_query_timeout 0

#  TAG: maximum_icp_query_timeout (msec)
# Normally the ICP query timeout is determined dynamically.  But
# sometimes it can lead to very large values (say 5 seconds).
# Use this option to put an upper limit on the dynamic timeout
# value.  Do NOT use this option to always use a fixed (instead
# of a dynamic) timeout value. To set a fixed timeout see the
# 'icp_query_timeout' directive.
#
#Default:
# maximum_icp_query_timeout 2000

#  TAG: mcast_icp_query_timeout (msec)
# For Multicast peers, Squid regularly sends out ICP "probes" to
# count how many other peers are listening on the given multicast
# address.  This value specifies how long Squid should wait to
# count all the replies.  The default is 2000 msec, or 2
# seconds.
#
#Default:
# mcast_icp_query_timeout 2000

#  TAG: dead_peer_timeout (seconds)
# This controls how long Squid waits to declare a peer cache
# as "dead."  If there are no ICP replies received in this
# amount of time, Squid will declare the peer dead and not
# expect to receive any further ICP replies.  However, it
# continues to send ICP queries, and will mark the peer as
# alive upon receipt of the first subsequent ICP reply.
#
# This timeout also affects when Squid expects to receive ICP
# replies from peers.  If more than 'dead_peer' seconds have
# passed since the last ICP reply was received, Squid will not
# expect to receive an ICP reply on the next query.  Thus, if
# your time between requests is greater than this timeout, you
# will see a lot of requests sent DIRECT to origin servers
# instead of to your parents.
#
#Default:
# dead_peer_timeout 10 seconds

#  TAG: hierarchy_stoplist
# A list of words which, if found in a URL, cause the object to
# be handled directly by this cache.  In other words, use this
# to not query neighbor caches for certain objects.  You may
# list this option multiple times.
#
#We recommend you to use at least the following line.
hierarchy_stoplist cgi-bin ?

#  TAG: no_cache
# A list of ACL elements which, if matched, cause the reply to
# immediately removed from the cache.  In other words, use this
# to force certain objects to never be cached.
#
# You must use the word 'DENY' to indicate the ACL names which should
# NOT be cached.
#
#We recommend you to use the following two lines.
acl QUERY urlpath_regex cgi-bin \?
no_cache deny QUERY


# OPTIONS WHICH AFFECT THE CACHE SIZE
# -----------------------------------------------------------------------------

#  TAG: cache_mem (bytes)
# NOTE: THIS PARAMETER DOES NOT SPECIFY THE MAXIMUM PROCESS
# SIZE.  IT PLACES A LIMIT ON ONE ASPECT OF SQUID'S MEMORY
# USAGE.  SQUID USES MEMORY FOR OTHER THINGS AS WELL.
# YOUR PROCESS WILL PROBABLY BECOME TWICE OR THREE TIMES
# BIGGER THAN THE VALUE YOU PUT HERE
#
# 'cache_mem' specifies the ideal amount of memory to be used
# for:
# * In-Transit objects
# * Hot Objects
# * Negative-Cached objects
#
# Data for these objects are stored in 4 KB blocks.  This
# parameter specifies the ideal upper limit on the total size of
# 4 KB blocks allocated.  In-Transit objects take the highest
# priority.
#
# In-transit objects have priority over the others.  When
# additional space is needed for incoming data, negative-cached
# and hot objects will be released.  In other words, the
# negative-cached and hot objects will fill up any unused space
# not needed for in-transit objects.
#
# If circumstances require, this limit will be exceeded.
# Specifically, if your incoming request rate requires more than
# 'cache_mem' of memory to hold in-transit objects, Squid will
# exceed this limit to satisfy the new requests.  When the load
# decreases, blocks will be freed until the high-water mark is
# reached.  Thereafter, blocks will be used to store hot
# objects.
#
#Default:
# cache_mem 8 MB

#  TAG: cache_swap_low (percent, 0-100)
#  TAG: cache_swap_high (percent, 0-100)
#
# The low- and high-water marks for cache object replacement.
# Replacement begins when the swap (disk) usage is above the
# low-water mark and attempts to maintain utilization near the
# low-water mark.  As swap utilization gets close to high-water
# mark object eviction becomes more aggressive.  If utilization is
# close to the low-water mark less replacement is done each time.
#
# Defaults are 90% and 95%. If you have a large cache, 5% could be
# hundreds of MB. If this is the case you may wish to set these
# numbers closer together.
#
#Default:
# cache_swap_low 90
# cache_swap_high 95

#  TAG: maximum_object_size (bytes)
# Objects larger than this size will NOT be saved on disk.  The
# value is specified in kilobytes, and the default is 4MB.  If
# you wish to get a high BYTES hit ratio, you should probably
# increase this (one 32 MB object hit counts for 3200 10KB
# hits).  If you wish to increase speed more than your want to
# save bandwidth you should leave this low.
#
# NOTE: if using the LFUDA replacement policy you should increase
# this value to maximize the byte hit rate improvement of LFUDA!
# See replacement_policy below for a discussion of this policy.
#
#Default:
# maximum_object_size 4096 KB

#  TAG: minimum_object_size (bytes)
# Objects smaller than this size will NOT be saved on disk.  The
# value is specified in kilobytes, and the default is 0 KB, which
# means there is no minimum.
#
#Default:
# minimum_object_size 0 KB

#  TAG: maximum_object_size_in_memory (bytes)
#        Objects greater than this size will not be attempted to kept in
#        the memory cache. This should be set high enough to keep objects
#        accessed frequently in memory to improve performance whilst low
#        enough to keep larger objects from hoarding cache_mem .
#
#Default:
# maximum_object_size_in_memory 8 KB

#  TAG: ipcache_size (number of entries)
#  TAG: ipcache_low (percent)
#  TAG: ipcache_high (percent)
# The size, low-, and high-water marks for the IP cache.
#
#Default:
# ipcache_size 1024
# ipcache_low 90
# ipcache_high 95

#  TAG: fqdncache_size (number of entries)
# Maximum number of FQDN cache entries.
#
#Default:
# fqdncache_size 1024

#  TAG: cache_replacement_policy
# The cache replacement policy parameter determines which
# objects are evicted (replaced) when disk space is needed.
#
#     lru       : Squid's original list based LRU policy
#     heap GDSF : Greedy-Dual Size Frequency
#     heap LFUDA: Least Frequently Used with Dynamic Aging
#     heap LRU  : LRU policy implemented using a heap
#
# Applies to any cache_dir lines listed below this.
#
# The LRU policies keeps recently referenced objects.
#
# The heap GDSF policy optimizes object hit rate by keeping smaller
# popular objects in cache so it has a better chance of getting a
# hit.  It achieves a lower byte hit rate than LFUDA though since
# it evicts larger (possibly popular) objects.
#
# The heap LFUDA policy keeps popular objects in cache regardless of
# their size and thus optimizes byte hit rate at the expense of
# hit rate since one large, popular object will prevent many
# smaller, slightly less popular objects from being cached.
#
# Both policies utilize a dynamic aging mechanism that prevents
# cache pollution that can otherwise occur with frequency-based
# replacement policies.
#
# NOTE: if using the LFUDA replacement policy you should increase
# the value of maximum_object_size above its default of 4096 KB to
# to maximize the potential byte hit rate improvement of LFUDA.  
#
# For more information about the GDSF and LFUDA cache replacement
# policies see http://www.hpl.hp.com/techreports/1999/HPL-1999-69.html
# and http://fog.hpl.external.hp.com/techreports/98/HPL-98-173.html.
#
#Default:
# cache_replacement_policy lru

#  TAG: memory_replacement_policy
# The memory replacement policy parameter determines which
# objects are purged from memory when memory space is needed.
#
# See cache_replacement_policy for details.
#
#Default:
# memory_replacement_policy lru


# LOGFILE PATHNAMES AND CACHE DIRECTORIES
# -----------------------------------------------------------------------------

#  TAG: cache_dir
# Usage:
#
# cache_dir Type Directory-Name Fs-specific-data [options]
#
# You can specify multiple cache_dir lines to spread the
# cache among different disk partitions.
#
# Type specifies the kind of storage system to use.  Most
# everyone will want to use "ufs" as the type.  If you are using
# Async I/O (--enable async-io) on Linux or Solaris, then you may
# want to try "aufs" as the type.  Async IO support may be
# buggy, however, so beware.
#
# 'Directory' is a top-level directory where cache swap
# files will be stored.  If you want to use an entire disk
# for caching, then this can be the mount-point directory.
# The directory must exist and be writable by the Squid
# process.  Squid will NOT create this directory for you.
#
# The ufs store type:
#
# "ufs" is the old well-known Squid storage format that has always
# been there.
#
# cache_dir ufs Directory-Name Mbytes L1 L2 [options]
#
# 'Mbytes' is the amount of disk space (MB) to use under this
# directory.  The default is 100 MB.  Change this to suit your
# configuration.
#
# 'Level-1' is the number of first-level subdirectories which
# will be created under the 'Directory'.  The default is 16.
#
# 'Level-2' is the number of second-level subdirectories which
# will be created under each first-level directory.  The default
# is 256.
#
# The aufs store type:
#
# "aufs" uses the same storage format as "ufs", utilizing
# POSIX-threads to avoid blocking the main Squid process on
# disk-I/O. This was formerly known in Squid as async-io.
#
# cache_dir aufs Directory-Name Mbytes L1 L2 [options]
#
# see argument descriptions under ufs above
#
# The diskd store type:
#
# "diskd" uses the same storage format as "ufs", utilizing a
# separate process to avoid blocking the main Squid process on
# disk-I/O.
#
# cache_dir diskd Directory-Name Mbytes L1 L2 [options] [Q1=n] [Q2=n]
#
# see argument descriptions under ufs above
#
# Q1 specifies the number of unacknowledged I/O requests when Squid
# stops opening new files. If this many messages are in the queues,
# Squid won't open new files. Default is 64
#
# Q2 specifies the number of unacknowledged messages when Squid
# starts blocking.  If this many messages are in the queues,
# Squid blocks until it recevies some replies. Default is 72
#
# Common options:
#
# read-only, this cache_dir is read only.
#
# max-size=n, refers to the max object size this storedir supports.
# It is used to initially choose the storedir to dump the object.
# Note: To make optimal use of the max-size limits you should order
# the cache_dir lines with the smallest max-size value first and the
# ones with no max-size specification last.
#
#Default:
# cache_dir ufs /var/spool/squid 100 16 256

#  TAG: cache_access_log
# Logs the client request activity.  Contains an entry for
# every HTTP and ICP queries received.
#
#Default:
# cache_access_log /var/log/squid/access.log

#  TAG: cache_log
# Cache logging file. This is where general information about
# your cache's behavior goes. You can increase the amount of data
# logged to this file with the "debug_options" tag below.
#
#Default:
# cache_log /var/log/squid/cache.log

#  TAG: cache_store_log
# Logs the activities of the storage manager.  Shows which
# objects are ejected from the cache, and which objects are
# saved and for how long.  To disable, enter "none". There are
# not really utilities to analyze this data, so you can safely
# disable it.
#
#Default:
# cache_store_log /var/log/squid/store.log

#  TAG: cache_swap_log
# Location for the cache "swap.log."  This log file holds the
# metadata of objects saved on disk.  It is used to rebuild the
# cache during startup.  Normally this file resides in each
# 'cache_dir' directory, but you may specify an alternate
# pathname here.  Note you must give a full filename, not just
# a directory. Since this is the index for the whole object
# list you CANNOT periodically rotate it!
#
# If %s can be used in the file name then it will be replaced with a
# a representation of the cache_dir name where each / is replaced
# with '.'. This is needed to allow adding/removing cache_dir
# lines when cache_swap_log is being used.
#     
# If have more than one 'cache_dir', and %s is not used in the name
# then these swap logs will have names such as:
#
# cache_swap_log.00
# cache_swap_log.01
# cache_swap_log.02
#
# The numbered extension (which is added automatically)
# corresponds to the order of the 'cache_dir' lines in this
# configuration file.  If you change the order of the 'cache_dir'
# lines in this file, then these log files will NOT correspond to
# the correct 'cache_dir' entry (unless you manually rename
# them).  We recommend that you do NOT use this option.  It is
# better to keep these log files in each 'cache_dir' directory.
#
#Default:
# none

#  TAG: emulate_httpd_log on|off
# The Cache can emulate the log file format which many 'httpd'
# programs use.  To disable/enable this emulation, set
# emulate_httpd_log to 'off' or 'on'.  The default
# is to use the native log format since it includes useful
# information that Squid-specific log analyzers use.
#
#Default:
emulate_httpd_log on

#  TAG: log_ip_on_direct on|off
# Log the destination IP address in the hierarchy log tag when going
# direct. Earlier Squid versions logged the hostname here. If you
# prefer the old way set this to off.
#
#Default:
# log_ip_on_direct on

#  TAG: mime_table
# Pathname to Squid's MIME table. You shouldn't need to change
# this, but the default file contains examples and formatting
# information if you do.
#
#Default:
# mime_table /etc/squid/mime.conf

#  TAG: log_mime_hdrs on|off
# The Cache can record both the request and the response MIME
# headers for each HTTP transaction.  The headers are encoded
# safely and will appear as two bracketed fields at the end of
# the access log (for either the native or httpd-emulated log
# formats).  To enable this logging set log_mime_hdrs to 'on'.
#
#Default:
# log_mime_hdrs off

#  TAG: useragent_log
# Note: This option is only available if Squid is rebuilt with the
#       --enable-useragent-log option
#
# Squid will write the User-Agent field from HTTP requests
# to the filename specified here.  By default useragent_log
# is disabled.
#
#Default:
# none

#  TAG: referer_log
# Note: This option is only available if Squid is rebuilt with the
#       --enable-referer-log option
#
# Squid will write the Referer field from HTTP requests to the
# filename specified here.  By default referer_log is disabled.
#
#Default:
# none

#  TAG: pid_filename
# A filename to write the process-id to.  To disable, enter "none".
#
#Default:
# pid_filename /var/run/squid.pid

#  TAG: debug_options
# Logging options are set as section,level where each source file
# is assigned a unique section.  Lower levels result in less
# output,  Full debugging (level 9) can result in a very large
# log file, so be careful.  The magic word "ALL" sets debugging
# levels for all sections.  We recommend normally running with
# "ALL,1".
#
#Default:
# debug_options ALL,1

#  TAG: log_fqdn on|off
# Turn this on if you wish to log fully qualified domain names
# in the access.log. To do this Squid does a DNS lookup of all
# IP's connecting to it. This can (in some situations) increase
# latency, which makes your cache seem slower for interactive
# browsing.
#
#Default:
# log_fqdn off

#  TAG: client_netmask
# A netmask for client addresses in logfiles and cachemgr output.
# Change this to protect the privacy of your cache clients.
# A netmask of 255.255.255.0 will log all IP's in that range with
# the last digit set to '0'.
#
#Default:
# client_netmask 255.255.255.255


# OPTIONS FOR EXTERNAL SUPPORT PROGRAMS
# -----------------------------------------------------------------------------

#  TAG: ftp_user
# If you want the anonymous login password to be more informative
# (and enable the use of picky ftp servers), set this to something
# reasonable for your domain, like wwwuser@somewhere.net
#
# The reason why this is domainless by default is that the
# request can be made on the behalf of a user in any domain,
# depending on how the cache is used.
# Some ftp server also validate that the email address is valid
# (for example perl.com).
#
#Default:
# ftp_user Squid@

#  TAG: ftp_list_width
# Sets the width of ftp listings. This should be set to fit in
# the width of a standard browser. Setting this too small
# can cut off long filenames when browsing ftp sites.
#
#Default:
# ftp_list_width 32

#  TAG: ftp_passive
# If your firewall does not allow Squid to use passive
# connections, then turn off this option.
#
#Default:
# ftp_passive on

#  TAG: cache_dns_program
# Note: This option is only available if Squid is rebuilt with the
#       --disable-internal-dns option
#
# Specify the location of the executable for dnslookup process.
#
#Default:
# cache_dns_program /usr/lib/squid/

#  TAG: dns_children
# Note: This option is only available if Squid is rebuilt with the
#       --disable-internal-dns option
#
# The number of processes spawn to service DNS name lookups.
# For heavily loaded caches on large servers, you should
# probably increase this value to at least 10.  The maximum
# is 32.  The default is 5.
#
# You must have at least one dnsserver process.
#
#Default:
# dns_children 5

#  TAG: dns_retransmit_interval
# Initial retransmit interval for DNS queries. The interval is
# doubled each time all configured DNS servers have been tried.
#
#
#Default:
# dns_retransmit_interval 5 seconds

#  TAG: dns_timeout
# DNS Query timeout. If no response is received to a DNS query
# within this time then all DNS servers for the queried domain
# is assumed to be unavailable.
#
#Default:
# dns_timeout 5 minutes

#  TAG: dns_defnames on|off
# Note: This option is only available if Squid is rebuilt with the
#       --disable-internal-dns option
#
# Normally the 'dnsserver' disables the RES_DEFNAMES resolver
# option (see res_init(3)).  This prevents caches in a hierarchy
# from interpreting single-component hostnames locally.  To allow
# dnsserver to handle single-component names, enable this
# option.
#
#Default:
# dns_defnames off

#  TAG: dns_nameservers
# Use this if you want to specify a list of DNS name servers
# (IP addresses) to use instead of those given in your
# /etc/resolv.conf file.
#
# Example: dns_nameservers 10.0.0.1 192.172.0.4
#
#Default:
# none

#  TAG: diskd_program
# Specify the location of the diskd executable.
# Note that this is only useful if you have compiled in
# diskd as one of the store io modules.
#
#Default:
# diskd_program /usr/lib/squid/diskd

#  TAG: unlinkd_program
# Specify the location of the executable for file deletion process.
#
#Default:
# unlinkd_program /usr/lib/squid/unlinkd

#  TAG: pinger_program
# Note: This option is only available if Squid is rebuilt with the
#       --enable-icmp option
#
# Specify the location of the executable for the pinger process.
# This is only useful if you configured Squid (during compilation)
# with the '--enable-icmp' option.
#
#Default:
# pinger_program /usr/lib/squid/

#  TAG: redirect_program
# Specify the location of the executable for the URL redirector.
# Since they can perform almost any function there isn't one included.
# See the Release-Notes for information on how to write one.
# By default, a redirector is not used.
#
#Default:
# none

#  TAG: redirect_children
# The number of redirector processes to spawn. If you start
# too few Squid will have to wait for them to process a backlog of
# URLs, slowing it down. If you start too many they will use RAM
# and other system resources.
#
#Default:
# redirect_children 5

#  TAG: redirect_rewrites_host_header
# By default Squid rewrites any Host: header in redirected
# requests.  If you are running a accelerator then this may
# not be a wanted effect of a redirector.
#
#Default:
# redirect_rewrites_host_header on

#  TAG: redirector_access
# If defined, this access list specifies which requests are
# sent to the redirector processes.  By default all requests
# are sent.
#
#Default:
# none

#  TAG: authenticate_program
# Specify the command for the external authenticator.  Such a
# program reads a line containing "username password" and replies
# "OK" or "ERR" in an endless loop.  If you use an authenticator,
# make sure you have 1 acl of type proxy_auth.  By default, the
# authenticator_program is not used.
#
# If you want to use the traditional proxy authentication,
# jump over to the ../auth_modules/NCSA directory and
# type:
# % make
# % make install
#
# Then, set this line to something like
#
# authenticate_program /usr/bin/ncsa_auth /usr/etc/passwd
#
#Default:
# none

#  TAG: authenticate_children
# The number of authenticator processes to spawn (default 5). If you
# start too few Squid will have to wait for them to process a backlog
# of usercode/password verifications, slowing it down. When password
# verifications are done via a (slow) network you are likely to need
# lots of authenticator processes.
#
#Default:
# authenticate_children 5

#  TAG: authenticate_ttl
# The time a checked username/password combination remains cached.
# If a wrong password is given for a cached user, the user gets
# removed from the username/password cache forcing a revalidation.
#
#Default:
# authenticate_ttl 1 hour

#  TAG: authenticate_ip_ttl
# With this option you control how long a proxy authentication
# will be bound to a specific IP address. If a request using
# the same user name is received during this time then access
# will be denied and both users are required to reauthenticate
# them selves.  The idea behind this is to make it annoying
# for people to share their password to their friends, but
# yet allow a dialup user to reconnect on a different dialup
# port.
#
# The default is 0 to disable the check. Recommended value
# if you have dialup users are no more than 60 seconds to allow
# the user to redial without hassle. If all your users are
# stationary then higher values may be used.
#
# See also authenticate_ip_ttl_is_strict
#
#Default:
# authenticate_ip_ttl 0 seconds

#  TAG: authenticate_ip_ttl_is_strict
# This option makes authenticate_ip_ttl a bit stricted. With this
# enabled authenticate_ip_ttl will deny all access from other IP
# addresses until the TTL has expired, and the IP address "owning"
# the userid will not be forced to reauthenticate.
#
#Default:
# authenticate_ip_ttl_is_strict on


# OPTIONS FOR TUNING THE CACHE
# -----------------------------------------------------------------------------

#  TAG: wais_relay_host
#  TAG: wais_relay_port
# Relay WAIS request to host (1st arg) at port (2 arg).
#
#Default:
# wais_relay_port 0

#  TAG: request_header_max_size (KB)
# This specifies the maximum size for HTTP headers in a request.
# Request headers are usually relatively small (about 512 bytes).
# Placing a limit on the request header size will catch certain
# bugs (for example with persistent connections) and possibly
# buffer-overflow or denial-of-service attacks.
#
#Default:
# request_header_max_size 10 KB

#  TAG: request_body_max_size (KB)
# This specifies the maximum size for an HTTP request body.
# In other words, the maximum size of a PUT/POST request.
# A user who attempts to send a request with a body larger
# than this limit receives an "Invalid Request" error message.
# If you set this parameter to a zero, there will be no limit
# imposed.
#
#Default:
# request_body_max_size 1 MB

#  TAG: reply_body_max_size (KB)
# This option specifies the maximum size of a reply body.  It
# can be used to prevent users from downloading very large files,
# such as MP3's and movies.   The reply size is checked twice.
# First when we get the reply headers, we check the
# content-length value.  If the content length value exists and
# is larger than this parameter, the request is denied and the
# user receives an error message that says "the request or reply
# is too large." If there is no content-length, and the reply
# size exceeds this limit, the client's connection is just closed
# and they will receive a partial reply.
#
# NOTE: downstream caches probably can not detect a partial reply
# if there is no content-length header, so they will cache
# partial responses and give them out as hits.  You should NOT
# use this option if you have downstream caches.
#
# If you set this parameter to zero (the default), there will be
# no limit imposed.
#
#Default:
# reply_body_max_size 0

#  TAG: refresh_pattern
# usage: refresh_pattern [-i] regex min percent max [options]
#
# By default, regular expressions are CASE-SENSITIVE.  To make
# them case-insensitive, use the -i option.
#
# 'Min' is the time (in minutes) an object without an explicit
# expiry time should be considered fresh. The recommended
# value is 0, any higher values may cause dynamic applications
# to be erroneously cached unless the application designer
# has taken the appropriate actions.
#
# 'Percent' is a percentage of the objects age (time since last
# modification age) an object without explicit expiry time
# will be considered fresh.
#
# 'Max' is an upper limit on how long objects without an explicit
# expiry time will be considered fresh.
#
# options: overrsde-expire
# override-lastmod
# reload-into-ims
# ignore-reload
#
# override-expire enforces min age even if the server
# sent a Expires: header. Doing this VIOLATES the HTTP
# standard.  Enabling this feature could make you liable
# for problems which it causes.
#
# override-lastmod enforces min age even on objects
# that was modified recently.
#
# reload-into-ims changes client no-cache or ``reload''
# to If-Modified-Since requests. Doing this VIOLATES the
# HTTP standard. Enabling this feature could make you
# liable for problems which it causes.
#
# ignore-reload ignores a client no-cache or ``reload''
# header. Doing this VIOLATES the HTTP standard. Enabling
# this feature could make you liable for problems which
# it causes.
#
# Please see the file doc/Release-Notes-1.1.txt for a full
# description of Squid's refresh algorithm.  Basically a
# cached object is: (the order is changed from 1.1.X)
#
# FRESH if expires < now, else STALE
# STALE if age > max
# FRESH if lm-factor < percent, else STALE
# FRESH if age < min
# else STALE
#
# The refresh_pattern lines are checked in the order listed here.
# The first entry which matches is used.  If none of the entries
# match, then the default will be used.
#
# Note, you must uncomment all the default lines if you want
# to change one. The default setting is only active if none is
# used.
#
#Default:
# refresh_pattern ^ftp: 1440 20% 10080
# refresh_pattern ^gopher: 1440 0% 1440
# refresh_pattern . 0 20% 4320

#  TAG: reference_age
# As a part of normal operation, Squid performs Least Recently
# Used removal of cached objects.  The LRU age for removal is
# computed dynamically, based on the amount of disk space in
# use.  The dynamic value can be seen in the Cache Manager 'info'
# output.
#
# The 'reference_age' parameter defines the maximum LRU age.  For
# example, setting reference_age to '1 week' will cause objects
# to be removed if they have not been accessed for a week or
# more.  The default value is one year.
#
# Specify a number here, followed by units of time.  For example:
# 1 week
# 3.5 days
# 4 months
# 2.2 hours
#
# NOTE: this parameter is not used when using the enhanced
# replacement policies, GDSH or LFUDA.
#
#Default:
# reference_age 1 year

#  TAG: quick_abort_min (KB)
#  TAG: quick_abort_max (KB)
#  TAG: quick_abort_pct (percent)
# The cache can be configured to continue downloading aborted
# requests.  This may be undesirable on slow (e.g. SLIP) links
# and/or very busy caches.  Impatient users may tie up file
# descriptors and bandwidth by repeatedly requesting and
# immediately aborting downloads.
#
# When the user aborts a request, Squid will check the
# quick_abort values to the amount of data transfered until
# then.
#
# If the transfer has less than 'quick_abort_min' KB remaining,
# it will finish the retrieval.  Setting 'quick_abort_min' to -1
# will disable the quick_abort feature.
#
# If the transfer has more than 'quick_abort_max' KB remaining,
# it will abort the retrieval.
#
# If more than 'quick_abort_pct' of the transfer has completed,
# it will finish the retrieval.
#
#Default:
# quick_abort_min 16 KB
# quick_abort_max 16 KB
# quick_abort_pct 95

#  TAG: negative_ttl time-units
# Time-to-Live (TTL) for failed requests.  Certain types of
# failures (such as "connection refused" and "404 Not Found") are
# negatively-cached for a configurable amount of time.  The
# default is 5 minutes.  Note that this is different from
# negative caching of DNS lookups.
#
#Default:
# negative_ttl 5 minutes

#  TAG: positive_dns_ttl time-units
# Time-to-Live (TTL) for positive caching of successful DNS lookups.
# Default is 6 hours (360 minutes).  If you want to minimize the
# use of Squid's ipcache, set this to 1, not 0.
#
#Default:
# positive_dns_ttl 6 hours

#  TAG: negative_dns_ttl time-units
# Time-to-Live (TTL) for negative caching of failed DNS lookups.
#
#Default:
# negative_dns_ttl 5 minutes

#  TAG: range_offset_limit (bytes)
# Sets a upper limit on how far into the the file a Range request
# may be to cause Squid to prefetch the whole file. If beyond this
# limit then Squid forwards the Range request as it is and the result
# is NOT cached.
#
# This is to stop a far ahead range request (lets say start at 17MB)
# from making Squid fetch the whole object up to that point before
# sending anything to the client.
#
# A value of -1 causes Squid to always fetch the object from the
# beginning so that it may cache the result. (2.0 style)
#
# A value of 0 causes Squid to never fetch more than the
# client requested. (default)
#
#Default:
# range_offset_limit 0 KB


# TIMEOUTS
# -----------------------------------------------------------------------------

#  TAG: connect_timeout time-units
# Some systems (notably Linux) can not be relied upon to properly
# time out connect(2) requests.  Therefore the Squid process
# enforces its own timeout on server connections.  This parameter
# specifies how long to wait for the connect to complete.  The
# default is two minutes (120 seconds).
#
#Default:
# connect_timeout 2 minutes

#  TAG: peer_connect_timeout time-units
# This parameter specifies how long to wait for a pending TCP
# connection to a peer cache.  The default is 30 seconds.   You
# may also set different timeout values for individual neighbors
# with the 'connect-timeout' option on a 'cache_peer' line.
#
#Default:
# peer_connect_timeout 30 seconds

#  TAG: siteselect_timeout time-units
# For URN to multiple URL's URL selection
#
#Default:
# siteselect_timeout 4 seconds

#  TAG: read_timeout time-units
# The read_timeout is applied on server-side connections.  After
# each successful read(), the timeout will be extended by this
# amount.  If no data is read again after this amount of time,
# the request is aborted and logged with ERR_READ_TIMEOUT.  The
# default is 15 minutes.
#
#Default:
# read_timeout 15 minutes

#  TAG: request_timeout
# How long to wait for an HTTP request after connection
# establishment.  For persistent connections, wait this long
# after the previous request completes.
#
#Default:
# request_timeout 30 seconds

#  TAG: client_lifetime time-units
# The maximum amount of time that a client (browser) is allowed to
# remain connected to the cache process.  This protects the Cache
# from having a lot of sockets (and hence file descriptors) tied up
# in a CLOSE_WAIT state from remote clients that go away without
# properly shutting down (either because of a network failure or
# because of a poor client implementation).  The default is one
# day, 1440 minutes.
#
# NOTE:  The default value is intended to be much larger than any
# client would ever need to be connected to your cache.  You
# should probably change client_lifetime only as a last resort.
# If you seem to have many client connections tying up
# filedescriptors, we recommend first tuning the read_timeout,
# request_timeout, pconn_timeout and quick_abort values.
#
#Default:
# client_lifetime 1 day

#  TAG: half_closed_clients
# Some clients may shutdown the sending side of their TCP
# connections, while leaving their receiving sides open. Sometimes,
# Squid can not tell the difference between a half-closed and a
# fully-closed TCP connection.  By default, half-closed client
# connections are kept open until a read(2) or write(2) on the
# socket returns an error.  Change this option to 'off' and Squid
# will immediately close client connections when read(2) returns
# "no more data to read."
#
#Default:
# half_closed_clients on

#  TAG: pconn_timeout
# Timeout for idle persistent connections to servers and other
# proxies.
#
#Default:
# pconn_timeout 120 seconds

#  TAG: ident_timeout
# Maximum time to wait for IDENT requests.  If this is too high,
# and you enabled 'ident_lookup', then you might be susceptible
# to denial-of-service by having many ident requests going at
# once.
#
# Only src type ACL checks are fully supported.  A src_domain
# ACL might work at times, but it will not always provide
# the correct result.
#
# This option may be disabled by using --disable-ident with
# the configure script.
#
#Default:
# ident_timeout 10 seconds

#  TAG: shutdown_lifetime time-units
# When SIGTERM or SIGHUP is received, the cache is put into
# "shutdown pending" mode until all active sockets are closed.
# This value is the lifetime to set for all open descriptors
# during shutdown mode.  Any active clients after this many
# seconds will receive a 'timeout' message.
#
#Default:
# shutdown_lifetime 30 seconds


# ACCESS CONTROLS
# -----------------------------------------------------------------------------

#  TAG: acl
# Defining an Access List
#
# acl aclname acltype string1 ...
# acl aclname acltype "file" ...
#
# when using "file", the file should contain one item per line
#
# acltype is one of src dst srcdomain dstdomain url_pattern
# urlpath_pattern time port proto method browser user
#
# By default, regular expressions are CASE-SENSITIVE.  To make
# them case-insensitive, use the -i option.
#
# acl aclname src      ip-address/netmask ... (clients IP address)
# acl aclname src      addr1-addr2/netmask ... (range of addresses)
# acl aclname dst      ip-address/netmask ... (URL host's IP address)
# acl aclname myip     ip-address/netmask ... (local socket IP address)
#
# acl aclname srcdomain   .foo.com ...    # reverse lookup, client IP
# acl aclname dstdomain   .foo.com ...    # Destination server from URL
# acl aclname srcdom_regex [-i] xxx ...   # regex matching client name
# acl aclname dstdom_regex [-i] xxx ...   # regex matching server
#   # For dstdomain and dstdom_regex  a reverse lookup is tried if a IP
#   # based URL is used. The name "none" is used if the reverse lookup
#   # fails.
#
# acl aclname time     [day-abbrevs]  [h1:m1-h2:m2]
#     day-abbrevs:
# S - Sunday
# M - Monday
# T - Tuesday
# W - Wednesday
# H - Thursday
# F - Friday
# A - Saturday
#     h1:m1 must be less than h2:m2
# acl aclname url_regex [-i] ^http:// ... # regex matching on whole URL
# acl aclname urlpath_regex [-i] \.gif$ ... # regex matching on URL path
# acl aclname port     80 70 21 ...
# acl aclname port     0-1024 ... # ranges allowed
# acl aclname myport   3128 ... # (local socket TCP port)
# acl aclname proto    HTTP FTP ...
# acl aclname method   GET POST ...
# acl aclname browser  [-i] regexp
#   # pattern match on User-Agent header
# acl aclname ident    username ...
# acl aclname ident_regex [-i] pattern ...
#   # string match on ident output.
#   # use REQUIRED to accept any non-null ident.
# acl aclname src_as   number ...
# acl aclname dst_as   number ...
#   # Except for access control, AS numbers can be used for
#   # routing of requests to specific caches. Here's an
#   # example for routing all requests for AS#1241 and only
#   # those to mycache.mydomain.net:
#   # acl asexample dst_as 1241
#   # cache_peer_access mycache.mydomain.net allow asexample
#   # cache_peer_access mycache_mydomain.net deny all
#
# acl aclname proxy_auth username ...
# acl aclname proxy_auth_regex [-i] pattern ...
#   # list of valid usernames
#   # use REQUIRED to accept any valid username.
#   #
#   # NOTE: when a Proxy-Authentication header is sent but it is not
#   # needed during ACL checking the username is NOT logged
#   # in access.log.
#   #
#   # NOTE: proxy_auth requires a EXTERNAL authentication program
#   # to check username/password combinations (see
#   # authenticate_program).
#   #
#   # WARNING: proxy_auth can't be used in a transparent proxy. It
#   # collides with any authentication done by origin servers. It may
#   # seem like it works at first, but it doesn't.
#
# acl aclname snmp_community string ...
#   # A community string to limit access to your SNMP Agent
#   # Example:
#   #
#   # acl snmppublic snmp_community public
#
# acl aclname maxconn number
#   # This will be matched when the client's IP address has
#   # more than <number> HTTP connections established.
#
# acl req_mime_type mime-type1 ...
#   # regex match agains the mime type of the request generated
#   # by the client. Can be used to detect file upload or some
#   # types HTTP tunelling requests.
#   # NOTE: This does NOT match the reply. You cannot use this
#   # to match the returned file type.
#
#Examples:
#acl myexample dst_as 1241
#acl password proxy_auth REQUIRED
#acl fileupload req_mime_type -i ^multipart/form-data$
#
#Recommended minimum configuration:
acl all src 0.0.0.0/0.0.0.0
acl manager proto cache_object
acl localhost src 127.0.0.1/255.255.255.255
acl SSL_ports port 443 563 2303
acl Safe_ports port 80 # http
acl Safe_ports port 21 # ftp
acl Safe_ports port 443 563 2303 # https, snews
acl Safe_ports port 70 # gopher
acl Safe_ports port 210 # wais
acl Safe_ports port 1025-65535 # unregistered ports
acl Safe_ports port 280 # http-mgmt
acl Safe_ports port 488 # gss-http
acl Safe_ports port 591 # filemaker
acl Safe_ports port 777 # multiling http
acl Safe_ports port 25
acl Safe_ports port 110
acl Safe_ports port 3128
# acl Safe_ports port 2303
acl CONNECT method CONNECT


#******************************

acl icq_port port 5190
acl icq_domain dstdomain icq.com
acl icq_proto proto HTTPS
acl icq_adr dst 64.12.0.0/16

#******************************


# acl user_list src 10.10.3.14/255.255.255.255
# acl ftp_proto proto ftp


acl user1 src 10.10.3.149/255.255.255.255

acl user2 src 10.10.3.151/255.255.255.255

acl user3 src 10.10.3.14/255.255.255.255

acl user4 src 10.10.3.104/255.255.255.255

acl user5 src 10.10.3.68/255.255.255.255


acl user6 src 10.10.3.105/255.255.255.255

acl user7 src 10.10.3.106/255.255.255.255

acl user8 src 10.10.3.152/255.255.255.255

acl user9 src 10.10.3.153/255.255.255.255

acl user10 src 10.10.3.154/255.255.255.255

acl user11 src 10.10.3.155/255.255.255.255

acl user12 src 10.10.3.156/255.255.255.255

acl user13 src 10.10.3.157/255.255.255.255

acl user14 src 10.10.3.158/255.255.255.255

#  TAG: http_access
# Allowing or Denying access based on defined access lists
#
# Access to the HTTP port:
# http_access allow|deny [!]aclname ...
#
# NOTE on default values:
#
# If there are no "access" lines present, the default is to deny
# the request.
#
# If none of the "access" lines cause a match, the default is the
# opposite of the last line in the list.  If the last line was
# deny, then the default is allow.  Conversely, if the last line
# is allow, the default will be deny.  For these reasons, it is a
# good idea to have an "deny all" or "allow all" entry at the end
# of your access lists to avoid potential confusion.
#
#Default:
# http_access deny all

#
#Recommended minimum configuration:
#
# Only allow cachemgr access from localhost
# http_access allow manager localhost
http_access allow manager user1
# http_access deny manager

# Deny requests to unknown ports
http_access deny !Safe_ports

# Deny CONNECT to other than SSL ports
http_access deny CONNECT !SSL_ports
#
# INSERT YOUR OWN RULE(S) HERE TO ALLOW ACCESS FROM YOUR CLIENTS
#
# And finally deny all other access to this proxy

http_access allow user1
http_access allow user2
http_access allow user3
http_access allow user4
http_access allow ...

#http_access allow ...
http_access allow ....
http_access allow ....
http_access allow ....
http_access allow ....
http_access allow .....
http_access allow .....
http_access allow .....
http_access allow .....
http_access allow .....
http_access allow .... icq_adr icq_port icq_proto CONNECT


# http_access allow user_list
# http_access deny user_list ftp_proto

http_access allow localhost
http_access deny all

#  TAG: icp_access
# Allowing or Denying access to the ICP port based on defined
# access lists
#
# icp_access  allow|deny [!]aclname ...
#
# See http_access for details
#
#Default:
# icp_access deny all
#
#Allow ICP queries from eveyone
icp_access allow all

#  TAG: miss_access
# Use to force your neighbors to use you as a sibling instead of
# a parent.  For example:
#
# acl localclients src 172.16.0.0/16
# miss_access allow localclients
# miss_access deny  !localclients
#
# This means that only your local clients are allowed to fetch
# MISSES and all other clients can only fetch HITS.
#
# By default, allow all clients who passed the http_access rules
# to fetch MISSES from us.
#
#Default setting:
# miss_access allow all

#  TAG: cache_peer_access
# Similar to 'cache_peer_domain' but provides more flexibility by
# using ACL elements.
#
# cache_peer_access cache-host allow|deny [!]aclname ...
#
# The syntax is identical to 'http_access' and the other lists of
# ACL elements.  See the comments for 'http_access' below, or
# the Squid FAQ (http://www.squid-cache.org/FAQ/FAQ-10.html).
#
#Default:
# none

#  TAG: proxy_auth_realm
# Specifies the realm name which is to be reported to the client for
# proxy authentication (part of the text the user will see when
# prompted their username and password).
#
#Default:
# proxy_auth_realm Squid proxy-caching web server

#  TAG: ident_lookup_access
# A list of ACL elements which, if matched, cause an ident
# (RFC 931) lookup to be performed for this request.  For
# example, you might choose to always perform ident lookups
# for your main multi-user Unix boxes, but not for your Macs
# and PCs.  By default, ident lookups are not performed for
# any requests.
#
# To enable ident lookups for specific client addresses, you
# can follow this example:
#
# acl ident_aware_hosts src 198.168.1.0/255.255.255.0
# ident_lookup_access allow ident_aware_hosts
# ident_lookup_access deny all
#
# This option may be disabled by using --disable-ident with
# the configure script.
#
#Default:
# ident_lookup_access deny all


# ADMINISTRATIVE PARAMETERS
# -----------------------------------------------------------------------------

#  TAG: cache_mgr
# Email-address of local cache manager who will receive
# mail if the cache dies.  The default is "webmaster."
#cache_mgr root
#
#Default:
# cache_mgr root

#  TAG: cache_effective_user
#  TAG: cache_effective_group
#
# If the cache is run as root, it will change its effective/real
# UID/GID to the UID/GID specified below.  The default is to
# change to UID to squid and GID to squid.
#
# If Squid is not started as root, the default is to keep the
# current UID/GID.  Note that if Squid is not started as root then
# you cannot set http_port to a value lower than 1024.
#
#cache_effective_user squid
#cache_effective_group squid
#
#Default:
# cache_effective_user squid
# cache_effective_group squid

#  TAG: visible_hostname
# If you want to present a special hostname in error messages, etc,
# then define this.  Otherwise, the return value of gethostname()
# will be used. If you have multiple caches in a cluster and
# get errors about IP-forwarding you must set them to have individual
# names with this setting.
#
#Default:
# none

#  TAG: unique_hostname
# If you want to have multiple machines with the same
# 'visible_hostname' then you must give each machine a different
# 'unique_hostname' so that forwarding loops can be detected.
#
#Default:
# none

#  TAG: hostname_aliases
# A list of other DNS names that your cache has.
#
#Default:
# none


# OPTIONS FOR THE CACHE REGISTRATION SERVICE
# -----------------------------------------------------------------------------
#
# This section contains parameters for the (optional) cache
# announcement service.  This service is provided to help
# cache administrators locate one another in order to join or
# create cache hierarchies.
#
# An 'announcement' message is sent (via UDP) to the registration
# service by Squid.  By default, the announcement message is NOT
# SENT unless you enable it with 'announce_period' below.
#
# The announcement message includes your hostname, plus the
# following information from this configuration file:
#
# http_port
# icp_port
# cache_mgr
#
# All current information is processed regularly and made
# available on the Web at http://www.ircache.net/Cache/Tracker/.

#  TAG: announce_period
# This is how frequently to send cache announcements.  The
# default is `0' which disables sending the announcement
# messages.
#
# To enable announcing your cache, just uncomment the line
# below.
#
#Default:
# announce_period 0
#
#To enable announcing your cache, just uncomment the line below.
#announce_period 1 day

#  TAG: announce_host
#  TAG: announce_file
#  TAG: announce_port
# announce_host and announce_port set the hostname and port
# number where the registration message will be sent.
#
# Hostname will default to 'tracker.ircache.net' and port will
# default default to 3131.  If the 'filename' argument is given,
# the contents of that file will be included in the announce
# message.
#
#Default:
# announce_host tracker.ircache.net
# announce_port 3131


# HTTPD-ACCELERATOR OPTIONS
# -----------------------------------------------------------------------------

#  TAG: httpd_accel_host
#  TAG: httpd_accel_port
# If you want to run Squid as an httpd accelerator, define the
# host name and port number where the real HTTP server is.
#
# If you want virtual host support then specify the hostname
# as "virtual".
#
# If you want virtual port support then specify the port as "0".
#
# NOTE: enabling httpd_accel_host disables proxy-caching and
# ICP.  If you want these features enabled also, then set
# the 'httpd_accel_with_proxy' option.
#
#Default:
# httpd_accel_port 80

#  TAG: httpd_accel_single_host on|off
# If you are running Squid as a accelerator and have a single backend
# server then set this to on. This causes Squid to forward the request
# to this server irregardles of what any redirectors or Host headers
# says.
#
# Leave this at off if you have multiple backend servers, and use a
# redirector (or host table or private DNS) to map the requests to the
# appropriate backend servers. Note that the mapping needs to be a
# 1-1 mapping between requested and backend (from redirector) domain
# names or caching will fail, as cacing is performed using the
# URL returned from the redirector.
#
# See also redirect_rewrites_host_header.
#
#Default:
# httpd_accel_single_host off

#  TAG: httpd_accel_with_proxy on|off
# If you want to use Squid as both a local httpd accelerator
# and as a proxy, change this to 'on'. Note however that your
# proxy users may have trouble to reach the accelerated domains
# unless their browsers are configured not to use this proxy for
# those domains (for example via the no_proxy browser configuration
# setting)
#
#Default:
# httpd_accel_with_proxy off

#  TAG: httpd_accel_uses_host_header on|off
# HTTP/1.1 requests include a Host: header which is basically the
# hostname from the URL.  Squid can be an accelerator for
# different HTTP servers by looking at this header.  However,
# Squid does NOT check the value of the Host header, so it opens
# a big security hole.  We recommend that this option remain
# disabled unless you are sure of what you are doing.
#
# However, you will need to enable this option if you run Squid
# as a transparent proxy.  Otherwise, virtual servers which
# require the Host: header will not be properly cached.
#
#Default:
# httpd_accel_uses_host_header off


# MISCELLANEOUS
# -----------------------------------------------------------------------------

#  TAG: dns_testnames
# The DNS tests exit as soon as the first site is successfully looked up
#
# This test can be disabled with the -D command line option.
#
#Default:
# dns_testnames netscape.com internic.net nlanr.net microsoft.com

#  TAG: logfile_rotate
# Specifies the number of logfile rotations to make when you
# type 'squid -k rotate'.  The default is 10, which will rotate
# with extensions 0 through 9.  Setting logfile_rotate to 0 will
# disable the rotation, but the logfiles are still closed and
# re-opened.  This will enable you to rename the logfiles
# yourself just before sending the rotate signal.
#
# Note, the 'squid -k rotate' command normally sends a USR1
# signal to the running squid process.  In certain situations
# (e.g. on Linux with Async I/O), USR1 is used for other
# purposes, so -k rotate uses another signal.  It is best to get
# in the habit of using 'squid -k rotate' instead of 'kill -USR1
# <pid>'.
#
#logfile_rotate 0
#
#Default:
# logfile_rotate 0

#  TAG: append_domain
# Appends local domain name to hostnames without any dots in
# them.  append_domain must begin with a period.
#
#Example:
# append_domain .yourdomain.com
#
#Default:
# none

#  TAG: tcp_recv_bufsize (bytes)
# Size of receive buffer to set for TCP sockets.  Probably just
# as easy to change your kernel's default.  Set to zero to use
# the default buffer size.
#
#Default:
# tcp_recv_bufsize 0 bytes

#  TAG: err_html_text
# HTML text to include in error messages.  Make this a "mailto"
# URL to your admin address, or maybe just a link to your
# organizations Web page.
#
# To include this in your error messages, you must rewrite
# the error template files (found in the "errors" directory).
# Wherever you want the 'err_html_text' line to appear,
# insert a %L tag in the error template file.
#
#Default:
# none

#  TAG: deny_info
# Usage:   deny_info err_page_name acl
# Example: deny_info ERR_CUSTOM_ACCESS_DENIED bad_guys
#
# This can be used to return a ERR_ page for requests which
# do not pass the 'http_access' rules.  A single ACL will cause
# the http_access check to fail.  If a 'deny_info' line exists
# for that ACL then Squid returns a corresponding error page.
#
# You may use ERR_ pages that come with Squid or create your own pages
# and put them into the configured errors/ directory.
#
#Default:
# none

#  TAG: memory_pools on|off
# If set, Squid will keep pools of allocated (but unused) memory
# available for future use.  If memory is a premium on your
# system and you believe your malloc library outperforms Squid
# routines, disable this.
#
#Default:
# memory_pools on

#  TAG: memory_pools_limit (bytes)
# Used only with memory_pools on:
# memory_pools_limit 50 MB
#
# If set to a non-zero value, Squid will keep at most the specified
# limit of allocated (but unused) memory in memory pools. All free()
# requests that exceed this limit will be handled by your malloc
# library. Squid does not pre-allocate any memory, just safe-keeps
# objects that otherwise would be free()d. Thus, it is safe to set
# memory_pools_limit to a reasonably high value even if your
# configuration will use less memory.
#
# If not set (default) or set to zero, Squid will keep all memory it
# can. That is, there will be no limit on the total amount of memory
# used for safe-keeping.
#
# To disable memory allocation optimization, do not set
# memory_pools_limit to 0. Set memory_pools to "off" instead.
#
# An overhead for maintaining memory pools is not taken into account
# when the limit is checked. This overhead is close to four bytes per
# object kept. However, pools may actually _save_ memory because of
# reduced memory thrashing in your malloc library.
#
#Default:
# none

#  TAG: forwarded_for on|off
# If set, Squid will include your system's IP address or name
# in the HTTP requests it forwards.  By default it looks like
# this:
#
# X-Forwarded-For: 192.1.2.3
#
# If you disable this, it will appear as
#
# X-Forwarded-For: unknown
#
#Default:
# forwarded_for on

#  TAG: log_icp_queries on|off
# If set, ICP queries are logged to access.log. You may wish
# do disable this if your ICP load is VERY high to speed things
# up or to simplify log analysis.
#
#Default:
# log_icp_queries on

#  TAG: icp_hit_stale on|off
# If you want to return ICP_HIT for stale cache objects, set this
# option to 'on'.  If you have sibling relationships with caches
# in other administrative domains, this should be 'off'.  If you only
# have sibling relationships with caches under your control, then
# it is probably okay to set this to 'on'.
#
#Default:
# icp_hit_stale off

#  TAG: minimum_direct_hops
# If using the ICMP pinging stuff, do direct fetches for sites
# which are no more than this many hops away.
#
#Default:
# minimum_direct_hops 4

#  TAG: minimum_direct_rtt
# If using the ICMP pinging stuff, do direct fetches for sites
# which are no more than this many rtt milliseconds away.
#
#Default:
# minimum_direct_rtt 400

#  TAG: cachemgr_passwd
# Specify passwords for cachemgr operations.
#
# Usage: cachemgr_passwd password action action ...
#
# Some valid actions are (see cache manager menu for a full list):
# 5min
# 60min
# asndb
# authenticator
# cbdata
# client_list
# comm_incoming
# config *
# counters
# delay
# digest_stats
# dns
# events
# filedescriptors
# fqdncache
# histograms
# http_headers
# info
# io
# ipcache
# mem
# menu
# netdb
# non_peers
# objects
# pconn
# peer_select
# redirector
# refresh
# server_list
# shutdown *
# store_digest
# storedir
# utilization
# via_headers
# vm_objects
#
# * Indicates actions which will not be performed without a
#   valid password, others can be performed if not listed here.
#
# To disable an action, set the password to "disable".
# To allow performing an action without a password, set the
# password to "none".
#
# Use the keyword "all" to set the same password for all actions.
#
#Example:
# cachemgr_passwd secret shutdown
# cachemgr_passwd lesssssssecret info stats/objects
# cachemgr_passwd disable all
#
#Default:
# none

#  TAG: store_avg_object_size (kbytes)
# Average object size, used to estimate number of objects your
# cache can hold.  See doc/Release-Notes-1.1.txt.  The default is
# 13 KB.
#
#Default:
# store_avg_object_size 13 KB

#  TAG: store_objects_per_bucket
# Target number of objects per bucket in the store hash table.
# Lowering this value increases the total number of buckets and
# also the storage maintenance rate.  The default is 50.
#
#Default:
# store_objects_per_bucket 20

#  TAG: client_db on|off
# If you want to disable collecting per-client statistics, then
# turn off client_db here.
#
#Default:
# client_db on

#  TAG: netdb_low
#  TAG: netdb_high
# The low and high water marks for the ICMP measurement
# database.  These are counts, not percents.  The defaults are
# 900 and 1000.  When the high water mark is reached, database
# entries will be deleted until the low mark is reached.
#
#Default:
# netdb_low 900
# netdb_high 1000

#  TAG: netdb_ping_period
# The minimum period for measuring a site.  There will be at
# least this much delay between successive pings to the same
# network.  The default is five minutes.
#
#Default:
# netdb_ping_period 5 minutes

#  TAG: query_icmp on|off
# If you want to ask your peers to include ICMP data in their ICP
# replies, enable this option.
#
# If your peer has configured Squid (during compilation) with
# '--enable-icmp' then that peer will send ICMP pings to origin server
# sites of the URLs it receives.  If you enable this option then the
# ICP replies from that peer will include the ICMP data (if available).
# Then, when choosing a parent cache, Squid will choose the parent with
# the minimal RTT to the origin server.  When this happens, the
# hierarchy field of the access.log will be
# "CLOSEST_PARENT_MISS".  This option is off by default.
#
#Default:
# query_icmp off

#  TAG: test_reachability on|off
# When this is 'on', ICP MISS replies will be ICP_MISS_NOFETCH
# instead of ICP_MISS if the target host is NOT in the ICMP
# database, or has a zero RTT.
#
#Default:
# test_reachability off

#  TAG: buffered_logs on|off
# Some log files (cache.log, useragent.log) are written with
# stdio functions, and as such they can be buffered or
# unbuffered.  By default they will be unbuffered. Buffering them
# can speed up the writing slightly (though you are unlikely to
# need to worry).
#
#Default:
# buffered_logs off

#  TAG: reload_into_ims on|off
# When you enable this option, client no-cache or ``reload''
# requests will be changed to If-Modified-Since requests.
# Doing this VIOLATES the HTTP standard.  Enabling this
# feature could make you liable for problems which it
# causes.
#
# see also refresh_pattern for a more selective approach.
#
# This option may be disabled by using --disable-http-violations
# with the configure script.
#
#Default:
# reload_into_ims off

#  TAG: always_direct
# Usage: always_direct allow|deny [!]aclname ...
#
# Here you can use ACL elements to specify requests which should
# ALWAYS be forwarded directly to origin servers.  For example,
# to always directly forward requests for local servers use
# something like:
#
# acl local-servers dstdomain my.domain.net
# always_direct allow local-servers
#
# To always forward FTP requests directly, use
#
# acl FTP proto FTP
# always_direct allow FTP
#
# NOTE: There is a similar, but opposite option named
# 'never_direct'.  You need to be aware that "always_direct deny
# foo" is NOT the same thing as "never_direct allow foo".  You
# may need to use a deny rule to exclude a more-specific case of
# some other rule.  Example:
#
# acl local-external dstdomain external.foo.net
# acl local-servers dstdomain  foo.net
# always_direct deny local-external
# always_direct allow local-servers
#
# This option replaces some v1.1 options such as local_domain
# and local_ip.
#
#Default:
# none

#  TAG: never_direct
# Usage: never_direct allow|deny [!]aclname ...
#
# never_direct is the opposite of always_direct.  Please read
# the description for always_direct if you have not already.
#
# With 'never_direct' you can use ACL elements to specify
# requests which should NEVER be forwarded directly to origin
# servers.  For example, to force the use of a proxy for all
# requests, except those in your local domain use something like:
#
# acl local-servers dstdomain foo.net
# acl all src 0.0.0.0/0.0.0.0
# never_direct deny local-servers
# never_direct allow all
#
# or if squid is inside a firewall and there is local intranet
# servers inside the firewall then use something like:
#
# acl local-intranet dstdomain foo.net
# acl local-external dstdomain external.foo.net
# always_direct deny local-external
# always_direct allow local-intranet
# never_direct allow all
#
# This option replaces some v1.1 options such as inside_firewall
# and firewall_ip.
#
#Default:
# none

#  TAG: anonymize_headers
# Usage: anonymize_headers allow|deny header_name ...
#
# This option replaces the old 'http_anonymizer' option with
# something that is much more configurable.  You may now
# specify exactly which headers are to be allowed, or which
# are to be removed from outgoing requests.
#
# There are two methods of using this option.  You may either
# allow specific headers (thus denying all others), or you
# may deny specific headers (thus allowing all others).
#
# For example, to achieve the same behavior as the old
# 'http_anonymizer standard' option, you should use:
#
# anonymize_headers deny From Referer Server
# anonymize_headers deny User-Agent WWW-Authenticate Link
#
# Or, to reproduce the old 'http_anonymizer paranoid' feature
# you should use:
#
# anonymize_headers allow Allow Authorization Cache-Control
# anonymize_headers allow Content-Encoding Content-Length
# anonymize_headers allow Content-Type Date Expires Host
# anonymize_headers allow If-Modified-Since Last-Modified
# anonymize_headers allow Location Pragma Accept
# anonymize_headers allow Accept-Encoding Accept-Language
# anonymize_headers allow Content-Language Mime-Version
# anonymize_headers allow Retry-After Title Connection
# anonymize_headers allow Proxy-Connection
#
# NOTE: You can not mix "allow" and "deny".  All 'anonymize_headers'
# lines must have the same second argument.
#
# By default, all headers are allowed (no anonymizing is
# performed).
#
#Default:
# none

#  TAG: fake_user_agent
# If you filter the User-Agent header with 'anonymize_headers' it
# may cause some Web servers to refuse your request.  Use this to
# fake one up.  For example:
#
# fake_user_agent Nutscrape/1.0 (CP/M; 8-bit)
# (credit to Paul Southworth pauls@etext.org for this one!)
#
#Default:
# none

#  TAG: icon_directory
# Where the icons are stored. These are normally kept in
# /usr/lib/squid/icons
#
#Default:
# icon_directory /usr/lib/squid/icons

#  TAG: error_directory
# Directory where the error files are read from.
# /usr/lib/squid/errors contains sets of error files
# in different languages. The default error directory
# is /etc/squid/errors, which is a link to one of these
# error sets.
#
# If you wish to create your own versions of the error files,
# either to customize them to suit your language or company,
# copy the template English files to another
# directory and point this tag at them.
#
#error_directory /etc/squid/errors
#
#Default:
# error_directory /etc/squid/errors

#  TAG: minimum_retry_timeout (seconds)
# This specifies the minimum connect timeout, for when the
# connect timeout is reduced to compensate for the availability
# of multiple IP addresses.
#
# When a connection to a host is initiated, and that host has
# several IP addresses, the default connection timeout is reduced
# by dividing it by the number of addresses.  So, a site with 15
# addresses would then have a timeout of 8 seconds for each
# address attempted.  To avoid having the timeout reduced to the
# point where even a working host would not have a chance to
# respond, this setting is provided.  The default, and the
# minimum value, is five seconds, and the maximum value is sixty
# seconds, or half of connect_timeout, whichever is greater and
# less than connect_timeout.
#
#Default:
# minimum_retry_timeout 5 seconds

#  TAG: maximum_single_addr_tries
# This sets the maximum number of connection attempts for a
# host that only has one address (for multiple-address hosts,
# each address is tried once).
#
# The default value is three tries, the (not recommended)
# maximum is 255 tries.  A warning message will be generated
# if it is set to a value greater than ten.
#
#Default:
# maximum_single_addr_tries 3

#  TAG: snmp_port
# Squid can now serve statistics and status information via SNMP.
# By default it listens to port 3401 on the machine. If you don't
# wish to use SNMP, set this to "0".
#
# NOTE: SNMP support requires use the --enable-snmp configure
# command line option.
#
#Default:
# snmp_port 3401

#  TAG: snmp_access
# Allowing or denying access to the SNMP port.
#
# All access to the agent is denied by default.
# usage:
#
# snmp_access allow|deny [!]aclname ...
#
#Example:
# snmp_access allow snmppublic localhost
# snmp_access deny all
#
#Default:
# snmp_access deny all

#  TAG: snmp_incoming_address
#  TAG: snmp_outgoing_address
# Just like 'udp_incoming_address' above, but for the SNMP port.
#
# snmp_incoming_address is used for the SNMP socket receiving
# messages from SNMP agents.
# snmp_outgoing_address is used for SNMP packets returned to SNMP
# agents.
#
# The default snmp_incoming_address (0.0.0.0) is to listen on all
# available network interfaces.
#
# If snmp_outgoing_address is set to 255.255.255.255 (the default)
# then it will use the same socket as snmp_incoming_address. Only
# change this if you want to have SNMP replies sent using another
# address than where this Squid listens for SNMP queries.
#
# NOTE, snmp_incoming_address and snmp_outgoing_address can not have
# the same value since they both use port 3401.
#
#Default:
# snmp_incoming_address 0.0.0.0
# snmp_outgoing_address 255.255.255.255

#  TAG: as_whois_server
# WHOIS server to query for AS numbers.  NOTE: AS numbers are
# queried only when Squid starts up, not for every request.
#
#Default:
# as_whois_server whois.ra.net
# as_whois_server whois.ra.net

#  TAG: wccp_router
# Use this option to define your WCCP ``home'' router for
# Squid.   Setting the 'wccp_router' to 0.0.0.0 (the default)
# disables WCCP.
#
#Default:
# wccp_router 0.0.0.0

#  TAG: wccp_version
# According to some users, Cisco IOS 11.2 only supports WCCP
# version 3.  If you're using that version of IOS, change
# this value to 3.
#
#Default:
# wccp_version 4

#  TAG: wccp_incoming_address
#  TAG: wccp_outgoing_address
#        wccp_incoming_address   Use this option if you require WCCP
# messages to be received on only one
# interface.  Do NOT use this option if
# you're unsure how many interfaces you
# have, or if you know you have only one
# interface.
#
# wccp_outgoing_address Use this option if you require WCCP
# messages to be sent out on only one
# interface.  Do NOT use this option if
# you're unsure how many interfaces you
# have, or if you know you have only one
# interface.
#
#        The default behavior is to not bind to any specific address.
#
#        NOTE, wccp_incoming_address and wccp_outgoing_address can not have
#        the same value since they both use port 2048.
#
#Default:
# wccp_incoming_address 0.0.0.0
# wccp_outgoing_address 255.255.255.255


# DELAY POOL PARAMETERS (all require DELAY_POOLS compilation option)
# -----------------------------------------------------------------------------

#  TAG: delay_pools
# This represents the number of delay pools to be used.  For example,
# if you have one class 2 delay pool and one class 3 delays pool, you
# have a total of 2 delay pools.
#
# To enable this option, you must use --enable-delay-pools with the
# configure script.
#
#Default:
# delay_pools 0

#  TAG: delay_class
# This defines the class of each delay pool.  There must be exactly one
# delay_class line for each delay pool.  For example, to define two
# delay pools, one of class 2 and one of class 3, the settings above
# and here would be:
#
#Example:
# delay_pools 2      # 2 delay pools
# delay_class 1 2    # pool 1 is a class 2 pool
# delay_class 2 3    # pool 2 is a class 3 pool
#
# The delay pool classes are:
#
# class 1 Everything is limited by a single aggregate
# bucket.
#
# class 2 Everything is limited by a single aggregate
# bucket as well as an "individual" bucket chosen
# from bits 25 through 32 of the IP address.
#
# class 3 Everything is limited by a single aggregate
# bucket as well as a "network" bucket chosen
# from bits 17 through 24 of the IP address and a
# "individual" bucket chosen from bits 17 through
# 32 of the IP address.
#
# NOTE: If an IP address is a.b.c.d
# -> bits 25 through 32 are "d"
# -> bits 17 through 24 are "c"
# -> bits 17 through 32 are "c * 256 + d"
#
#Default:
# none

#  TAG: delay_access
# This is used to determine which delay pool a request falls into.
# The first matched delay pool is always used, i.e., if a request falls
# into delay pool number one, no more delay are checked, otherwise the
# rest are checked in order of their delay pool number until they have
# all been checked.  For example, if you want some_big_clients in delay
# pool 1 and lotsa_little_clients in delay pool 2:
#
#Example:
# delay_access 1 allow some_big_clients
# delay_access 1 deny all
# delay_access 2 allow lotsa_little_clients
# delay_access 2 deny all
#
#Default:
# none

#  TAG: delay_parameters
# This defines the parameters for a delay pool.  Each delay pool has
# a number of "buckets" associated with it, as explained in the
# description of delay_class.  For a class 1 delay pool, the syntax is:
#
#delay_parameters pool aggregate
#
# For a class 2 delay pool:
#
#delay_parameters pool aggregate individual
#
# For a class 3 delay pool:
#
#delay_parameters pool aggregate network individual
#
# The variables here are:
#
# pool a pool number - ie, a number between 1 and the
# number specified in delay_pools as used in
# delay_class lines.
#
# aggregate the "delay parameters" for the aggregate bucket
# (class 1, 2, 3).
#
# individual the "delay parameters" for the individual
# buckets (class 2, 3).
#
# network the "delay parameters" for the network buckets
# (class 3).
#
# A pair of delay parameters is written restore/maximum, where restore is
# the number of bytes (not bits - modem and network speeds are usually
# quoted in bits) per second placed into the bucket, and maximum is the
# maximum number of bytes which can be in the bucket at any time.
#
# For example, if delay pool number 1 is a class 2 delay pool as in the
# above example, and is being used to strictly limit each host to 64kbps
# (plus overheads), with no overall limit, the line is:
#
#delay_parameters 1 -1/-1 8000/8000
#
# Note that the figure -1 is used to represent "unlimited".
#
# And, if delay pool number 2 is a class 3 delay pool as in the above
# example, and you want to limit it to a total of 256kbps (strict limit)
# with each 8-bit network permitted 64kbps (strict limit) and each
# individual host permitted 4800bps with a bucket maximum size of 64kb
# to permit a decent web page to be downloaded at a decent speed
# (if the network is not being limited due to overuse) but slow down
# large downloads more significantly:
#
#delay_parameters 2 32000/32000 8000/8000 600/64000
#
# There must be one delay_parameters line for each delay pool.
#
#Default:
# none

#  TAG: delay_initial_bucket_level (percent, 0-100)
# The initial bucket percentage is used to determine how much is put
# in each bucket when squid starts, is reconfigured, or first notices
# a host accessing it (in class 2 and class 3, individual hosts and
# networks only have buckets associated with them once they have been
# "seen" by squid).
#
#Default:
# delay_initial_bucket_level 50

#  TAG: incoming_icp_average
#  TAG: incoming_http_average
#  TAG: incoming_dns_average
#  TAG: min_icp_poll_cnt
#  TAG: min_dns_poll_cnt
#  TAG: min_http_poll_cnt
# Heavy voodoo here.  I can't even believe you are reading this.
# Are you crazy?  Don't even think about adjusting these unless
# you understand the algorithms in comm_select.c first!
#
#Default:
# incoming_icp_average 6
# incoming_http_average 4
# incoming_dns_average 4
# min_icp_poll_cnt 8
# min_dns_poll_cnt 8
# min_http_poll_cnt 8

#  TAG: max_open_disk_fds
# To avoid having disk as the I/O bottleneck Squid can optionally
# bypass the on-disk cache if more than this amount of disk file
# descriptors are open.
#
# A value of 0 indicates no limit.
#
#Default:
# max_open_disk_fds 0

#  TAG: offline_mode
# Enable this option and Squid will never try to validate cached
# objects.
#
#Default:
# offline_mode off

#  TAG: uri_whitespace
# What to do with requests that have whitespace characters in the
# URI.  Options:
#
# strip:  The whitespace characters are stripped out of the URL.
# This is the behavior recommended by RFC2616.
# deny:   The request is denied.  The user receives an "Invalid
# Request" message.
# allow:  The request is allowed and the URI is not changed.  The
# whitespace characters remain in the URI.  Note the
# whitespace is passed to redirector processes if they
# are in use.
# encode: The request is allowed and the whitespace characters are
# encoded according to RFC1738.  This could be considered
# a violation of the HTTP/1.1
# RFC because proxies are not allowed to rewrite URI's.
# chop: The request is allowed and the URI is chopped at the
# first whitespace.  This might also be considered a
# violation.
#
#Default:
# uri_whitespace strip

#  TAG: broken_posts
# A list of ACL elements which, if matched, causes Squid to send
# a extra CRLF pair after the body of a PUT/POST request.
#
# Some HTTP servers has broken implementations of PUT/POST,
# and rely on a extra CRLF pair sent by some WWW clients.
#
# Quote from RFC 2068 section 4.1 on this matter:
#
#   Note: certain buggy HTTP/1.0 client implementations generate an
#   extra CRLF's after a POST request. To restate what is explicitly
#   forbidden by the BNF, an HTTP/1.1 client must not preface or follow
#   a request with an extra CRLF.
#
#Example:
# acl buggy_server url_regex ^http://....
# broken_posts allow buggy_server
#
#Default:
# none

#  TAG: mcast_miss_addr
# Note: This option is only available if Squid is rebuilt with the
#       -DMULTICAST_MISS_STREAM option
#
# If you enable this option, every "cache miss" URL will
# be sent out on the specified multicast address.
#
# Do not enable this option unless you are are absolutely
# certain you understand what you are doing.
#
#Default:
# mcast_miss_addr 255.255.255.255

#  TAG: mcast_miss_ttl
# Note: This option is only available if Squid is rebuilt with the
#       -DMULTICAST_MISS_TTL option
#
# This is the time-to-live value for packets multicasted
# when multicasting off cache miss URLs is enabled.  By
# default this is set to 'site scope', i.e. 16.
#
#Default:
# mcast_miss_ttl 16

#  TAG: mcast_miss_port
# Note: This option is only available if Squid is rebuilt with the
#       -DMULTICAST_MISS_STREAM option
#
# This is the port number to be used in conjunction with
# 'mcast_miss_addr'.
#
#Default:
# mcast_miss_port 3135

#  TAG: mcast_miss_encode_key
# Note: This option is only available if Squid is rebuilt with the
#       -DMULTICAST_MISS_STREAM option
#
# The URLs that are sent in the multicast miss stream are
# encrypted.  This is the encryption key.
#
#Default:
# mcast_miss_encode_key XXXXXXXXXXXXXXXX

#  TAG: nonhierarchical_direct
# By default, Squid will send any non-hierarchical requests
# (matching hierarchy_stoplist or not cachable request type) direct
# to origin servers.
#
# If you set this to off, then Squid will prefer to send these
# requests to parents.
#
# Note that in most configurations, by turning this off you will only
# add latency to these request without any improvement in global hit
# ratio.
#
# If you are inside an firewall then see never_direct instead of
# this directive.
#
#Default:
# nonhierarchical_direct on

#  TAG: prefer_direct
# Normally Squid tries to use parents for most requests. If you by some
# reason like it to first try going direct and only use a parent if
# going direct fails then set this to off.
#
# By combining nonhierarchical_direct off and prefer_direct on you
# can set up Squid to use a parent as a backup path if going direct
# fails.
#
#Default:
# prefer_direct off

#  TAG: strip_query_terms
# By default, Squid strips query terms from requested URLs before
# logging.  This protects your user's privacy.
#
#Default:
# strip_query_terms on

#  TAG: coredump_dir
# By default Squid leaves core files in the first cache_dir
# directory.  If you set 'coredump_dir' to a directory
# that exists, Squid will chdir() to that directory at startup
# and coredump files will be left there.
#
#Default:
# none

#  TAG: redirector_bypass
# When this is 'on', a request will not go through the
# redirector if all redirectors are busy.  If this is 'off'
# and the redirector queue grows too large, Squid will exit
# with a FATAL error and ask you to increase the number of
# redirectors.  You should only enable this if the redirectors
# are not critical to your caching system.  If you use
# redirectors for access control, and you enable this option,
# then users may have access to pages that they should not
# be allowed to request.
#
#Default:
# redirector_bypass off

#  TAG: ignore_unknown_nameservers
# By default Squid checks that DNS responses are received
# from the same IP addresses that they are sent to.  If they
# don't match, Squid ignores the response and writes a warning
# message to cache.log.  You can allow responses from unknown
# nameservers by setting this option to 'off'.
#
#Default:
# ignore_unknown_nameservers on

#  TAG: digest_generation
# Note: This option is only available if Squid is rebuilt with the
#       --enable-cache-digests option
#
# This controls whether the server will generate a Cache Digest
# of its contents.  By default, Cache Digest generation is
# enabled if Squid is compiled with USE_CACHE_DIGESTS defined.
#
#Default:
# digest_generation on

#  TAG: digest_bits_per_entry
# Note: This option is only available if Squid is rebuilt with the
#       --enable-cache-digests option
#
# This is the number of bits of the server's Cache Digest which
# will be associated with the Digest entry for a given HTTP
# Method and URL (public key) combination.  The default is 5.
#
#Default:
# digest_bits_per_entry 5

#  TAG: digest_rebuild_period (seconds)
# Note: This option is only available if Squid is rebuilt with the
#       --enable-cache-digests option
#
# This is the number of seconds between Cache Digest rebuilds.
#
#Default:
# digest_rebuild_period 1 hour

#  TAG: digest_rewrite_period (seconds)
# Note: This option is only available if Squid is rebuilt with the
#       --enable-cache-digests option
#
# This is the number of seconds between Cache Digest writes to
# disk.
#
#Default:
# digest_rewrite_period 1 hour

#  TAG: digest_swapout_chunk_size (bytes)
# Note: This option is only available if Squid is rebuilt with the
#       --enable-cache-digests option
#
# This is the number of bytes of the Cache Digest to write to
# disk at a time.  It defaults to 4096 bytes (4KB), the Squid
# default swap page.
#
#Default:
# digest_swapout_chunk_size 4096 bytes

#  TAG: digest_rebuild_chunk_percentage (percent, 0-100)
# Note: This option is only available if Squid is rebuilt with the
#       --enable-cache-digests option
#
# This is the percentage of the Cache Digest to be scanned at a
# time.  By default it is set to 10% of the Cache Digest.
#
#Default:
# digest_rebuild_chunk_percentage 10

#  TAG: chroot
# Use this to have Squid do a chroot() while initializing.  This
# also causes Squid to fully drop root privileges after
# initializing.  This means, for example, that if you use a HTTP
# port less than 1024 and try to reconfigure, you will get an
# error.
#
#Default:
# none

#  TAG: client_persistent_connections
#  TAG: server_persistent_connections
# Persistent connection support for clients and servers.  By
# default, Squid uses persistent connections (when allowed)
# with its clients and servers.  You can use these options to
# disable persistent connections with clients and/or servers.
#
#Default:
# client_persistent_connections on
# server_persistent_connections on

#  TAG: pipeline_prefetch
# To boost the performance of pipelined requests to closer
# match that of a non-proxied environment Squid tries to fetch
# up to two requests in parallell from a pipeline.
#
#Default:
# pipeline_prefetch on

#  TAG: extension_methods
# Squid only knows about standardized HTTP request methods.
# You can add up to 20 additional "extension" methods here.
#
#Default:
# none

#  TAG: high_response_time_warning (msec)
# If the one-minute median response time exceeds this value,
# Squid prints a WARNING with debug level 0 to get the
# administrators attention.  The value is in milliseconds.
#
#Default:
# high_response_time_warning 0

#  TAG: high_page_fault_warning
# If the one-minute average page fault rate exceeds this
# value, Squid prints a WARNING with debug level 0 to get
# the administrators attention.  The value is in page faults
# per second.
#
#Default:
# high_page_fault_warning 0

#  TAG: high_memory_warning
# If the memory usage (as determined by mallinfo) exceeds
# value, Squid prints a WARNING with debug level 0 to get
# the administrators attention.
#
#Default:
# high_memory_warning 0

#  TAG: store_dir_select_algorithm
# Set this to 'round-robin' as an alternative.
#
#Default:
# store_dir_select_algorithm least-load

#  TAG: forward_log
# Note: This option is only available if Squid is rebuilt with the
#       -DWIP_FWD_LOG option
#
# Logs the server-side requests.
#
# This is currently work in progress.
#
#Default:
# none

#  TAG: ie_refresh on|off
# Microsoft Internet Explorer up until version 5.5 Service
# Pack 1 has an issue with transparent proxies, wherein it
# is impossible to force a refresh.  Turning this on provides
# a partial fix to the problem, by causing all IMS-REFRESH
# requests from older IE versions to check the origin server
# for fresh content.  This reduces hit ratio by some amount
# (~10% in my experience), but allows users to actually get
# fresh content when they want it.  Note that because Squid
# cannot tell if the user is using 5.5 or 5.5SP1, the behavior
# of 5.5 is unchanged from old versions of Squid (i.e. a
# forced refresh is impossible).  Newer versions of IE will,
# hopefully, continue to have the new behavior and will be
# handled based on that assumption.  This option defaults to
# the old Squid behavior, which is better for hit ratios but
# worse for clients using IE, if they need to be able to
# force fresh content.
#
#Default:
# ie_refresh off


  Рекомендовать в FAQ | Cообщить модератору | Наверх


Удалить

Индекс форумов | Темы | Пред. тема | След. тема
Пожалуйста, прежде чем написать сообщение, ознакомьтесь с данными рекомендациями.




Партнёры:
PostgresPro
Inferno Solutions
Hosting by Hoster.ru
Хостинг:

Закладки на сайте
Проследить за страницей
Created 1996-2024 by Maxim Chirkov
Добавить, Поддержать, Вебмастеру