The OpenNET Project / Index page

[ новости /+++ | форум | wiki | теги | ]

форумы  помощь  поиск  регистрация  майллист  вход/выход  слежка  RSS
"Сброс пароля на HP Procurve 2524"
Вариант для распечатки  
Пред. тема | След. тема 
Форум Маршрутизаторы CISCO и др. оборудование. (Оборудование Lucent, Nortell и др.)
Изначальное сообщение [ Отслеживать ]

"Сброс пароля на HP Procurve 2524"  +/
Сообщение от wowan400 email on 22-Мрт-11, 16:53 
Вообщем устроился в организацию в которой стоят коммутаторы HP Procurve но вот беда никто не знает пароль, можно ли как нибудь сбросить пароли не трогая конфигурацию HP Procurve 2524?
Ответить | Правка | Cообщить модератору

Оглавление

Сообщения по теме [Сортировка по времени | RSS]


1. "Сброс пароля на HP Procurve 2524"  +/
Сообщение от Merridius (ok) on 22-Мрт-11, 21:10 
> Вообщем устроился в организацию в которой стоят коммутаторы HP Procurve но вот
> беда никто не знает пароль, можно ли как нибудь сбросить пароли
> не трогая конфигурацию HP Procurve 2524?

Можно, в документации должно быть написано


Ответить | Правка | ^ к родителю #0 | Наверх | Cообщить модератору

2. "Сброс пароля на HP Procurve 2524"  +/
Сообщение от Merridius (ok) on 22-Мрт-11, 21:13 
You may want to consider a reset to factory defaults. as follows:

Clear/Reset: Resetting to the Factory-Default Configuration
To execute the factory default reset, perform these steps:
1. Using pointed objects, simultaneously press both the Reset and Clear buttons on the front of the switch.
2. Continue to press the Clear button while releasing the Reset button.
3. When the Self Test LED begins to flash, release the Clear button.
The switch will then complete its self test and begin operating with the configuration restored to the factory default settings.


Ответить | Правка | ^ к родителю #1 | Наверх | Cообщить модератору

3. "Сброс пароля на HP Procurve 2524"  +/
Сообщение от trolo on 23-Мрт-11, 01:38 
> You may want to consider a reset to factory defaults. as follows:
> the configuration restored to the factory default settings.

нет не хочу, ТС так и написал...

>...the configuration restored to the factory default settings.

Как раз то что нужно ТС(?!)

If You Lose the Password

If you lose the passwords, you can clear them by pressing the Clear button on

the front of the switch. This action deletes all password and user name

protection from all of the switch’s interfaces.

*The Clear button is provided for your convenience, but its presence means

that if you are concerned with the security of the switch configuration and

operation, you should make sure the switch is installed in a secure location,

such as a locked wiring closet. (For more information, refer to “Front Panel

Security” in the chapter titled “Configuring Username and Password Secu­

rity” in the Access Security Guide for your switch.)

читать ман внимательно!

Ответить | Правка | ^ к родителю #2 | Наверх | Cообщить модератору

Архив | Удалить

Рекомендовать для помещения в FAQ | Индекс форумов | Темы | Пред. тема | След. тема




Партнёры:
PostgresPro
Inferno Solutions
Hosting by Hoster.ru
Хостинг:

Закладки на сайте
Проследить за страницей
Created 1996-2024 by Maxim Chirkov
Добавить, Поддержать, Вебмастеру