Приобрел модем anydata e100a, но он не хочет соеденяться с нетом. в винде всё ок. Пины, пароли и всё прочее на модеме отключено. FreeBSD 7.0-stable. вот логи:

kldstat:
Id Refs Address    Size     Name
2    1 0xc0a6d000 561c     if_tun.ko
5    1 0xc0ac5000 3280     ubsa.ko
6    3 0xc0ac9000 3518     ucom.ko
7    1 0xc0acd000 405c     uplcom.ko
8    1 0xc0ad2000 2d34     uhid.ko
13    1 0xc1d20000 4000     libiconv.ko

log.all
Sep  5 17:19:53  freebsd kernel: ucom0: <AnyDATA Corporation AnyDATA CDMA Products, class 0/0, rev 1.10/0.00, addr 2> on uhub0
[....]
Sep  5 17:24:32  freebsd kernel: ucom0: ubsa_request: STALLED
Sep  5 17:24:32  freebsd last message repeated 6 times
Sep  5 17:24:33  freebsd kernel: ucom0: ucomreadcb: IOERROR
Sep  5 17:25:14  freebsd ppp[792]: tun0: Warning: Chat script failed
Sep  5 17:25:14  freebsd ppp[792]: tun0: Warning: deflink: Unable to set physical to speed 0

ppp.log
Sep  5 16:22:51  freebsd ppp[736]: Phase: Using interface: tun0
Sep  5 16:22:51  freebsd ppp[736]: Phase: deflink: Created in closed state
Sep  5 16:22:51  freebsd ppp[736]: tun0: Command: default: disable pred1 deflate deflate24 protocomp acfcomp shortseq vj
Sep  5 16:22:51  freebsd ppp[736]: tun0: Command: default: deny pred1 deflate deflate24 protocomp acfcomp shortseq vj
Sep  5 16:22:51  freebsd ppp[736]: tun0: Command: default: set speed 115200
Sep  5 16:22:51  freebsd ppp[736]: tun0: Command: default: set timeout 160
Sep  5 16:22:51  freebsd ppp[736]: tun0: Command: default: enable dns
Sep  5 16:22:51  freebsd ppp[736]: tun0: Command: bwc: set device /dev/ttyU0
Sep  5 16:22:51  freebsd ppp[736]: tun0: Command: bwc: set phone *99****1
Sep  5 16:22:51  freebsd ppp[736]: tun0: Command: bwc: set dial ABORT BUSY ABORT NO\sCARRIER TIMEOUT 5 "" AT OK-AT-OK ATE1Q0 OK     \dATDT\T TIMEOUT 40 CONNECT
Sep  5 16:22:51  freebsd ppp[736]: tun0: Command: bwc: set login
Sep  5 16:22:51  freebsd ppp[736]: tun0: Command: bwc: set authname bwc
Sep  5 16:22:51  freebsd ppp[736]: tun0: Command: bwc: set authkey ********
Sep  5 16:22:51  freebsd ppp[736]: tun0: Command: bwc: set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0
Sep  5 16:22:51  freebsd ppp[736]: tun0: Command: bwc: add default HISADDR
Sep  5 16:22:51  freebsd ppp[747]: tun0: Phase: PPP Started (ddial mode).
Sep  5 16:22:51  freebsd ppp[747]: tun0: Phase: bundle: Establish
Sep  5 16:22:51  freebsd ppp[747]: tun0: Phase: deflink: closed -> opening
Sep  5 16:22:51  freebsd ppp[747]: tun0: Phase: deflink: Connected!
Sep  5 16:22:51  freebsd ppp[747]: tun0: Phase: deflink: opening -> dial
Sep  5 16:22:51  freebsd ppp[747]: tun0: Chat: Phone: *99****1
Sep  5 16:22:51  freebsd ppp[747]: tun0: Chat: Send: AT^M
Sep  5 16:22:51  freebsd ppp[747]: tun0: Chat: Expect(5): OK
Sep  5 16:22:51  freebsd ppp[747]: tun0: Chat: Received: ^M
Sep  5 16:22:51  freebsd ppp[747]: tun0: Chat: Received: OK^M
Sep  5 16:22:51  freebsd ppp[747]: tun0: Chat: Send: ATE1Q0^M
Sep  5 16:22:51  freebsd ppp[747]: tun0: Chat: Expect(5): OK
Sep  5 16:22:51  freebsd ppp[747]: tun0: Chat: Received: ATE1Q0^M^M
Sep  5 16:22:51  freebsd ppp[747]: tun0: Chat: Received: OK^M
Sep  5 16:22:51  freebsd ppp[747]: tun0: Chat: Send: ATDT*99****1^M
Sep  5 16:22:53  freebsd ppp[747]: tun0: Chat: Expect(40): CONNECT
Sep  5 16:23:33  freebsd ppp[747]: tun0: Chat: Expect timeout
Sep  5 16:23:33  freebsd ppp[747]: tun0: Warning: Chat script failed
Sep  5 16:23:33  freebsd ppp[747]: tun0: Phase: deflink: dial -> hangup
Sep  5 16:23:33  freebsd ppp[747]: tun0: Warning: deflink: Unable to set physical to speed 0
Sep  5 16:23:33  freebsd ppp[747]: tun0: Phase: deflink: Disconnected!
Sep  5 16:23:33  freebsd ppp[747]: tun0: Warning: deflink: Unable to set physical to speed 0
Sep  5 16:23:34  freebsd ppp[747]: tun0: Phase: deflink: Connect time: 43 secs: 0 octets in, 0 octets out
Sep  5 16:23:34  freebsd ppp[747]: tun0: Phase: deflink: 0 packets in, 0 packets out
Sep  5 16:23:34  freebsd ppp[747]: tun0: Phase:  total 0 bytes/sec, peak 0 bytes/sec on Fri Sep  5 16:22:51 2008

ppp.conf
default:
set log Phase Chat LCP IPCP CCP tun command
ident user-ppp VERSION (built COMPILATIONDATE)

# Ensure that "device" references the correct serial port
# for your modem. (cuad0 = COM1, cuad1 = COM2)
#
set device /dev/ttyU0

set speed 115200
set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \
           \"\" AT OK-AT-OK ATE1Q0 OK \\dATDT\\T TIMEOUT 40 CONNECT"
set timeout 180            # 3 minute idle timer (the default)
enable dns                # request DNS info (for resolv.conf)

bwc:
#
# edit the next three lines and replace the items in caps with
# the values which have been assigned by your ISP.
#

set phone *99****1#
set authname bwc
set authkey internet
set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0
add default HISADDR            # Add a (sticky) default route