FreeNibs+Freedadius+MPD:ошибка 691, при конекте из под Винды
Помогите плизз!!!
Привет.
ОС: FreeBSD6.0
Выпадает ошибка 691, при конекте из под Винды - включал/выключал шифрование.
mpd v4
Использую Веб-интерфейс: nibs_web(.tar.bz2)
Нибс: freenibs-0.0.3-bf3_freeradius-1.0.1(.tar.bz2)
Радиус:freeradius-1.0.1(.tar.gz)
Использовал для ДБ: nibs_mysql_prof_add.sql,nibs_mysql_cards.sql,nibs_mysql.sql из freenib's
fireWall:pf
Пользователи не могут подключится...!!!
Если это ошибка не в настройках - то скажите!!!
Я тогда посижу над интерфейсом...
А лутше прислать дамп рабочей базы даных

Привожу свои настройки:
#cat acct-users
DEFAULT
                Service-Type == Framed-User,
                Service-Type == Login-User,
                Login-Service == Telnet,
                Login-Service == Rlogin,
                Login-Service == TCP-Clear,
                Login-TCP-Port <= 65536,
                Framed-IP-Address == 255.255.255.254,
                Framed-IP-Netmask == 255.255.255.255,
                Framed-Protocol == PPP,
                Framed-Protocol == SLIP,
                Framed-Compression == Van-Jacobson-TCP-IP,
                Framed-MTU >= 576,
                Framed-Filter-ID =* ANY,
                Reply-Message =* ANY,
                Proxy-State =* ANY,
                Session-Timeout <= 28800,
                Idle-Timeout <= 600,
                Port-Limit <= 2
#cat huntgroups |grep -v '#'
vpn             NAS-IP-Address == 192.168.10.1
# cat radius.conf
acct 127.0.0.1 weldpua 3 2
auth 127.0.0.1 weldpua 3 2

radiusd.conf - не трогал
# cat clients
192.168.10.1    weldpua    
127.0.0.1       weldpua
# cat clients.conf
client 127.0.0.1 {
                secret= weldpua
                shortname       = localhost
                nastype     = other     # localhost isn't usually a NAS...
        }
client 192.168.10.1 {
                secret          = weldpua
                shortname       = localhost
                nastype     = other     # localhost isn't usually a NAS...
        }
# cat hints
DEFAULT Suffix = ".ppp", Strip-User-Name = Yes
        Hint = "PPP",
        Service-Type = Framed-User,
        Framed-Protocol = PPP

DEFAULT Suffix = ".slip", Strip-User-Name = Yes
        Hint = "SLIP",
        Service-Type = Framed-User,
        Framed-Protocol = SLIP

DEFAULT Suffix = ".cslip", Strip-User-Name = Yes
        Hint = "CSLIP",
        Service-Type = Framed-User,
        Framed-Protocol = SLIP,
        Framed-Compression = Van-Jacobson-TCP-IP

# cat naslist
192.168.10.1             local           portslave
127.0.0.1       local   other

# cat nibs.conf|grep -v '#'
nibs {

    driver = "rlm_nibs_mysql"
    server = "localhost"
    port = "3306"
    login = "root"
    password = ""
    nibs_db = "freenibs"
....остальное без изменений    

# cat /usr/local/etc/mpd4/mpd.conf
default:
    load pptp0
pptp0:
    new -i ng00 pptp0 pptp0
    set ipcp ranges 192.168.10.1/24 192.168.11.1/32
    load pptp_standart
pptp_standart:
    set iface disable on-demand
    set bundle enable multilink
    set link yes acfcomp protocomp
    set link no pap chap
    set link enable chap
    set link keep-alive 60 180
    set ipcp yes vjcomp
    set ipcp dns 192.168.10.1
    set iface enable proxy-arp
    set bundle enable compression
    set ccp yes mppc
    set ccp yes mpp-e40
    set ccp yes mpp-e56
    set ccp yes mpp-e128
    set ccp yes mpp-stateless
    set bundle yes crypt-reqd
    set pptp enable incoming
    set pptp disable originate
    set iface mtu 1500
    set link mtu 1500
    set radius server 127.0.0.1 weldpua 1812 1813
    set radius timeout 10
    set radius config /opt/freeradius1.0.1/etc/raddb/radius.conf
    set radius retries 3
# ifconfig
rl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=8<VLAN_MTU>
        inet 192.168.10.1 netmask 0xffffff00 broadcast 192.168.10.255
        ether 00:0e:2e:2f:84:68
rl1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=8<VLAN_MTU>      
        inet 192.168.129.146 netmask 0xfffff000 broadcast 192.168.143.255
plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> mtu 1500
pflog0: flags=141<UP,RUNNING,PROMISC> mtu 33208
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
         inet 127.0.0.1 netmask 0xff000000
pfsync0: flags=0<> mtu 2020
ng0: flags=8890<POINTOPOINT,NOARP,SIMPLEX,MULTICAST> mtu 1500
        inet6 fe80::20e:2eff:fe2f:8468%ng0 prefixlen 64 scopeid 0x7