Немогу примонтировать раздел, проверка выдает вот это
Replaying journal..The problem has occurred looks like a hardware problem. If you have
bad blocks, we advise you to get a new hard drive, because once you
get one bad block that the disk drive internals cannot hide from
your sight,the chances of getting more are generally said to become
much higher (precise statistics are unknown to us), and this disk
drive is probably not expensive enough for you to you to risk your
time and data on it. If you don't want to follow that follow that
advice then if you have just a few bad blocks, try writing to the
bad blocks and see if the drive remaps the bad blocks (that means
it takes a block it has in reserve and allocates it for use for
of that block number). If it cannot remap the block, use badblock
option (-B) with reiserfs utils to handle this block correctly.bread: Cannot read the block (883): (Input/output error).
Aborted
Пробовал разные режимы, все какие есть.
Там написано про -B, но что-то я не понял что надо в файле писать.
Я так понимаю надо просто пометить этот блок как сбойный, как это сделать?
man badblocks
а почему: "ЯЙЦА ФАБЕРЖЕ"???
badblocks запускал воттак:
# badblocks /dev/hda8 -o badblocks.logпотом так:
# reiserfsck --fix-fixable -B badblocks.log /dev/hda8И вот что в итоге:
Will check consistency of the filesystem on /dev/hda8
and will fix what can be fixed without --rebuild-tree
Bad block list will contain only blocks specified in 'badblocks.log' file
Will put log info to 'stdout'Do you want to run this program?[N/Yes] (note need to type Yes if you do):Yes
create_badblock_bitmap: block number (2560) belongs to system reiserfs area. It cannot be relocated.
еще пробовал тупо в файл поставить блок 883 который не нравится, в итоге таже фигня
Хоть киньте ссылку на доку как сбойные блоки помечать
>Хоть киньте ссылку на доку как сбойные блоки помечать
fsck.reiserfs -h
Это?
Млин. Тоже самое гавно.
>Немогу примонтировать раздел, проверка выдает вот это
>
>
>Replaying journal..
>
>The problem has occurred looks like a hardware problem. If you have
>
>bad blocks, we advise you to get a new hard drive, because
>once you
>get one bad block that the disk drive internals
>cannot hide from
>your sight,the chances of getting more are generally said to become
>much higher (precise statistics are unknown to us), and this
>disk
>drive is probably not expensive enough for you to you to
>risk your
>time and data on it. If you don't want to
>follow that follow that
>advice then if you have just a few bad blocks,
>try writing to the
>bad blocks and see if the drive remaps the bad
>blocks (that means
>it takes a block it has in reserve and
>allocates it for use for
>of that block number). If it cannot remap the block,
>use badblock
>option (-B) with reiserfs utils to handle this block correctly.
>
>bread: Cannot read the block (883): (Input/output error).
>
>Aborted
>
>Пробовал разные режимы, все какие есть.
>Там написано про -B, но что-то я не понял что надо в
>файле писать.
>Я так понимаю надо просто пометить этот блок как сбойный, как это
>сделать?
русским же языком написано:create_badblock_bitmap: block number (2560) belongs to system reiserfs area. It cannot be relocated.
в чём проблема?