Помогите пож-ста настроить G.SHDSL на Cisco 878.
Провайдер дал минимум настроек, они принесли свой Zyxel показали что линия работает и свалили.
Я только смог посмотреть настройки Zyxel на его веб интерфейсе.Zyxel
Encapsulation PPPoE
Multiplex LLC
Virtual Circuit ID
VPI 8
VCI 35
ATM QoS Type UBR
Login Information
User Name хххххх
Password хххххх
IP Address ххх.ххх.ххх.ххх
Больше никаких данных у меня нет и даже что стоит на другой стороне не знаю. Толи пров хочет впарить свое железо толи действительно не умеют настраивать ничего кроме Зюкселей.
Вот мои настройки
controller DSL 0
mode atm
line-term cpe
line-mode 2-wire line-zero
dsl-mode shdsl symmetric annex B
line-rate auto
!
!
!
interface ATM0
no ip address
no atm ilmi-keepalive
!
interface ATM0.1 point-to-point
description $ES_WAN$$FW_OUTSIDE$
pvc 8/35
pppoe-client dial-pool-number 1
!
!
!
interface Dialer0
ip address ХХ.ХХХ.ХХХ.ХХХ 255.255.255.252
no ip redirects
no ip unreachables
no ip proxy-arp
ip mtu 1452
ip nat outside
ip virtual-reassembly
encapsulation ppp
ip route-cache flow
dialer pool 1
dialer-group 1
no cdp enable
ppp authentication pap callin
ppp pap sent-username ххххххх password 7 135650477C5D537A
!
Вот что мне показывает
cis878#
cis878#sho inter atm0
ATM0 is initializing, line protocol is down
Hardware is MPC ATMSAR
MTU 4470 bytes, sub MTU 4470, BW 4608 Kbit, DLY 80 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ATM, loopback not set
Encapsulation(s): AAL5 , PVC mode
10 maximum active VCs, 1024 VCs per VP, 0 current VCCs
VC Auto Creation Disabled.
VC idle disconnect time: 300 seconds
Last input never, output never, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: Per VC Queueing
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 packets output, 0 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 output buffer failures, 0 output buffers swapped out
cis878#
cis878#sho inter atm0.1
ATM0.1 is initializing, line protocol is down
Hardware is MPC ATMSAR
Description: $ES_WAN$$FW_OUTSIDE$
MTU 4470 bytes, BW 4608 Kbit, DLY 80 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ATM
0 packets input, 0 bytes
0 packets output, 0 bytes
0 OAM cells input, 0 OAM cells output
AAL5 CRC errors : 0
AAL5 SAR Timeouts : 0
AAL5 Oversized SDUs : 0
Last clearing of "show interface" counters never
cis878#
cis878#
cis878#sho inter dial 0
Dialer0 is up (spoofing), line protocol is up (spoofing)
Hardware is Unknown
Internet address is ХХ.ХХХ.ХХХ.ХХХ/30
MTU 1500 bytes, BW 56 Kbit, DLY 20000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation PPP, loopback not set
Keepalive set (10 sec)
DTR is pulsed for 1 seconds on reset
Last input never, output never, output hang never
Last clearing of "show interface" counters 00:01:39
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: weighted fair
Output queue: 0/1000/64/0 (size/max total/threshold/drops)
Conversations 0/0/16 (active/max active/max total)
Reserved Conversations 0/0 (allocated/max allocated)
Available Bandwidth 42 kilobits/sec
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
0 packets input, 0 bytes
0 packets output, 0 bytes
cis878#
cis878#
