�� IPS �� https (Avanty)

Wed, 28 Jan 2009 11:41:33 GMT

�� access-list.

�� , �� IPS (�� setup ��), �� acl.

�� :
Step 10 Enter yes to modify the network access list.
a. If you want to delete an entry, enter the number of the entry and press Enter, or press Enter to get
to the Permit line.
b. Enter the IP address and netmask of the network you want to add to the access list.
The IP network interface is in the form of IP Address/Netmask: X.X.X.X/nn, where X.X.X.X specifies
the network IP address as a 32-bit address written as 4 octets separated by periods and nn specifies
the number of bits in the netmask for that network.
For example, 10.0.0.0/8 permits all IP addresses on the 10.0.0.0 network (10.0.0.0-10.255.255.255)
and 10.1.1.0/24 permits only the IP addresses on the 10.1.1.0 subnet (10.1.1.0-10.1.1.255).
If you want to permit access to a single IP address than the entire network, use a 32-bit netmask. For
example, 10.1.1.1/32 permits just the 10.1.1.1 address.
c. Rep

OpenForum RSS: �� ���� �������������� � IPS �� https

�� ���� �������������� � IPS �� https (Avanty)

OpenForum RSS: �� IPS �� https

�� IPS �� https (Avanty)