# cat /etc/X11/xorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 313.18 (buildmeister@swio-display-x86-rhel47-11) Wed Jan 9 16:22:33 PST 2013Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
Modeline "2480x1024_60.00" 210.64 2480 2632 2896 3312 1024 1025 1028 1060 -HSync +Vsync
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "UseEdidDpi" "FALSE"
Option "DPI" "96x96"
SubSection "Display"
Depth 24
Modes "2480x1024_60.00"
EndSubSection
# cat /var/log/Xorg.0.log
[ 1906.650]
X.Org X Server 1.13.2
Release Date: 2013-01-24
[ 1906.650] X Protocol Version 11, Revision 0
[ 1906.650] Build Operating System: Linux 3.7.4-1-ARCH x86_64
[ 1906.650] Current Operating System: Linux workstation 3.7.5-1-ARCH #1 SMP PREEMPT Mon Jan 28 10:03:32 CET 2013 x86_64
[ 1906.650] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=bf3c4f6a-7916-46c3-b45e-5d0bb57e2515 ro quiet
[ 1906.650] Build Date: 25 January 2013 09:33:50AM
[ 1906.650]
[ 1906.650] Current version of pixman: 0.28.2
[ 1906.650] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 1906.650] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 1906.650] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Feb 23 23:38:13 2013
[ 1906.651] (==) Using config file: "/etc/X11/xorg.conf"
[ 1906.651] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 1906.651] (==) ServerLayout "Layout0"
[ 1906.651] (**) |-->Screen "Screen0" (0)
[ 1906.651] (**) | |-->Monitor "Monitor0"
[ 1906.652] (**) | |-->Device "Device0"
[ 1906.652] (**) |-->Input Device "Keyboard0"
[ 1906.652] (**) |-->Input Device "Mouse0"
[ 1906.652] (==) Automatically adding devices
[ 1906.652] (==) Automatically enabling devices
[ 1906.652] (==) Automatically adding GPU devices
[ 1906.652] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 1906.652] Entry deleted from font path.
[ 1906.652] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 1906.652] Entry deleted from font path.
[ 1906.652] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 1906.652] Entry deleted from font path.
[ 1906.652] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 1906.652] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 1906.652] Entry deleted from font path.
[ 1906.652] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 1906.652] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/
[ 1906.652] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 1906.652] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 1906.652] (WW) Disabling Keyboard0
[ 1906.652] (WW) Disabling Mouse0
[ 1906.652] (II) Loader magic: 0x7fcc40
[ 1906.652] (II) Module ABI versions:
[ 1906.652] X.Org ANSI C Emulation: 0.4
[ 1906.652] X.Org Video Driver: 13.1
[ 1906.652] X.Org XInput driver : 18.0
[ 1906.652] X.Org Server Extension : 7.0
[ 1906.655] (--) PCI:*(0:1:0:0) 10de:0422:1462:0740 rev 161, Mem @ 0xfd000000/16777216, 0xd0000000/268435456, 0xfa000000/33554432, I/O @ 0x0000e800/128, BIOS @ 0x????????/131072
[ 1906.656] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 1906.656] Initializing built-in extension Generic Event Extension
[ 1906.656] Initializing built-in extension SHAPE
[ 1906.656] Initializing built-in extension MIT-SHM
[ 1906.656] Initializing built-in extension XInputExtension
[ 1906.656] Initializing built-in extension XTEST
[ 1906.656] Initializing built-in extension BIG-REQUESTS
[ 1906.656] Initializing built-in extension SYNC
[ 1906.656] Initializing built-in extension XKEYBOARD
[ 1906.656] Initializing built-in extension XC-MISC
[ 1906.656] Initializing built-in extension SECURITY
[ 1906.656] Initializing built-in extension XINERAMA
[ 1906.656] Initializing built-in extension XFIXES
[ 1906.656] Initializing built-in extension RENDER
[ 1906.656] Initializing built-in extension RANDR
[ 1906.656] Initializing built-in extension COMPOSITE
[ 1906.656] Initializing built-in extension DAMAGE
[ 1906.656] Initializing built-in extension MIT-SCREEN-SAVER
[ 1906.656] Initializing built-in extension DOUBLE-BUFFER
[ 1906.656] Initializing built-in extension RECORD
[ 1906.656] Initializing built-in extension DPMS
[ 1906.657] Initializing built-in extension X-Resource
[ 1906.657] Initializing built-in extension XVideo
[ 1906.657] Initializing built-in extension XVideo-MotionCompensation
[ 1906.657] Initializing built-in extension XFree86-VidModeExtension
[ 1906.657] Initializing built-in extension XFree86-DGA
[ 1906.657] Initializing built-in extension XFree86-DRI
[ 1906.657] Initializing built-in extension DRI2
[ 1906.657] (II) LoadModule: "glx"
[ 1906.657] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 1906.697] (II) Module glx: vendor="NVIDIA Corporation"
[ 1906.697] compiled for 4.0.2, module version = 1.0.0
[ 1906.697] Module class: X.Org Server Extension
[ 1906.697] (II) NVIDIA GLX Module 313.18 Wed Jan 9 15:34:35 PST 2013
[ 1906.697] Loading extension GLX
[ 1906.697] (II) LoadModule: "nvidia"
[ 1906.697] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 1906.698] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 1906.699] compiled for 4.0.2, module version = 1.0.0
[ 1906.699] Module class: X.Org Video Driver
[ 1906.699] (II) NVIDIA dlloader X Driver 313.18 Wed Jan 9 15:15:26 PST 2013
[ 1906.699] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 1906.699] (++) using VT number 7
[ 1906.699] (II) Loading sub module "wfb"
[ 1906.699] (II) LoadModule: "wfb"
[ 1906.699] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 1906.700] (II) Module wfb: vendor="X.Org Foundation"
[ 1906.700] compiled for 1.13.2, module version = 1.0.0
[ 1906.700] ABI class: X.Org ANSI C Emulation, version 0.4
[ 1906.700] (II) Loading sub module "ramdac"
[ 1906.700] (II) LoadModule: "ramdac"
[ 1906.700] (II) Module "ramdac" already built-in
[ 1906.700] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 1906.700] (==) NVIDIA(0): RGB weight 888
[ 1906.700] (==) NVIDIA(0): Default visual is TrueColor
[ 1906.700] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 1906.700] (**) NVIDIA(0): Option "UseEdidDpi" "FALSE"
[ 1906.701] (**) NVIDIA(0): Option "DPI" "96x96"
[ 1906.701] (**) NVIDIA(0): Enabling 2D acceleration
[ 1907.193] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-1
[ 1907.195] (II) NVIDIA(0): NVIDIA GPU GeForce 8400 GS (G86) at PCI:1:0:0 (GPU-0)
[ 1907.195] (--) NVIDIA(0): Memory: 524288 kBytes
[ 1907.195] (--) NVIDIA(0): VideoBIOS: 60.86.41.00.90
[ 1907.195] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 1907.199] (--) NVIDIA(0): Valid display device(s) on GeForce 8400 GS at PCI:1:0:0
[ 1907.199] (--) NVIDIA(0): CRT-0
[ 1907.199] (--) NVIDIA(0): CRT-1 (connected)
[ 1907.199] (--) NVIDIA(0): TV-0
[ 1907.200] (--) NVIDIA(0): DFP-0
[ 1907.200] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[ 1907.200] (--) NVIDIA(0): CRT-1: 400.0 MHz maximum pixel clock
[ 1907.200] (--) NVIDIA(0): TV-0: 400.0 MHz maximum pixel clock
[ 1907.200] (--) NVIDIA(0): DFP-0: 165.0 MHz maximum pixel clock
[ 1907.200] (--) NVIDIA(0): DFP-0: Internal Single Link TMDS
[ 1907.200] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 1907.200] (**) NVIDIA(0): device CRT-1 (Using EDID frequencies has been enabled on
[ 1907.200] (**) NVIDIA(0): all display devices.)
[ 1907.201] (WW) NVIDIA(0): No valid modes for "CRT-1:2480x1024_60.00"; removing.
[ 1907.201] (WW) NVIDIA(0):
[ 1907.201] (WW) NVIDIA(0): Unable to validate any modes; falling back to the default mode
[ 1907.201] (WW) NVIDIA(0): "nvidia-auto-select".
[ 1907.201] (WW) NVIDIA(0):
[ 1907.201] (II) NVIDIA(0): Validated MetaModes:
[ 1907.201] (II) NVIDIA(0): "CRT-1:nvidia-auto-select"
[ 1907.201] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
[ 1907.229] (**) NVIDIA(0): DPI set to (96, 96); computed from "DPI" X config option
[ 1907.229] (--) Depth 24 pixmap format is 32 bpp
[ 1907.229] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[ 1907.233] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 1907.233] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 1907.233] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 1907.233] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 1907.233] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 1907.233] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 1907.233] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 1907.234] (II) NVIDIA(0): Config Options in the README.
[ 1907.238] (II) NVIDIA(0): Setting mode "CRT-1:nvidia-auto-select"
[ 1907.262] (II) NVIDIA(0): Built-in logo is bigger than the screen.
[ 1907.263] Loading extension NV-GLX
[ 1907.287] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 1907.287] (==) NVIDIA(0): Backing store disabled
[ 1907.287] (==) NVIDIA(0): Silken mouse enabled
[ 1907.288] (**) NVIDIA(0): DPMS enabled
[ 1907.288] Loading extension NV-CONTROL
[ 1907.288] Loading extension XINERAMA
[ 1907.288] (II) Loading sub module "dri2"
[ 1907.288] (II) LoadModule: "dri2"
[ 1907.288] (II) Module "dri2" already built-in
[ 1907.288] (II) NVIDIA(0): [DRI2] Setup complete
[ 1907.289] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 1907.289] (--) RandR disabled
[ 1907.299] (II) Initializing extension GLX
[ 1907.376] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 1907.376] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 1907.376] (II) LoadModule: "evdev"
[ 1907.377] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 1907.377] (II) Module evdev: vendor="X.Org Foundation"
[ 1907.377] compiled for 1.13.0, module version = 2.7.3
[ 1907.377] Module class: X.Org XInput Driver
[ 1907.377] ABI class: X.Org XInput driver, version 18.0
[ 1907.377] (II) Using input driver 'evdev' for 'Power Button'
[ 1907.377] (**) Power Button: always reports core events
[ 1907.377] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 1907.377] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 1907.377] (--) evdev: Power Button: Found keys
[ 1907.377] (II) evdev: Power Button: Configuring as keyboard
[ 1907.377] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 1907.377] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 1907.377] (**) Option "xkb_rules" "evdev"
[ 1907.377] (**) Option "xkb_model" "evdev"
[ 1907.377] (**) Option "xkb_layout" "us"
[ 1907.435] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 1907.435] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 1907.435] (II) Using input driver 'evdev' for 'Power Button'
[ 1907.435] (**) Power Button: always reports core events
[ 1907.435] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 1907.435] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 1907.435] (--) evdev: Power Button: Found keys
[ 1907.435] (II) evdev: Power Button: Configuring as keyboard
[ 1907.435] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[ 1907.435] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 1907.435] (**) Option "xkb_rules" "evdev"
[ 1907.436] (**) Option "xkb_model" "evdev"
[ 1907.436] (**) Option "xkb_layout" "us"
[ 1907.437] (II) config/udev: Adding input device MosArt Optical Mouse (/dev/input/event4)
[ 1907.437] (**) MosArt Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 1907.437] (II) Using input driver 'evdev' for 'MosArt Optical Mouse'
[ 1907.437] (**) MosArt Optical Mouse: always reports core events
[ 1907.437] (**) evdev: MosArt Optical Mouse: Device: "/dev/input/event4"
[ 1907.437] (--) evdev: MosArt Optical Mouse: Vendor 0x13ee Product 0x3
[ 1907.437] (--) evdev: MosArt Optical Mouse: Found 3 mouse buttons
[ 1907.437] (--) evdev: MosArt Optical Mouse: Found scroll wheel(s)
[ 1907.437] (--) evdev: MosArt Optical Mouse: Found relative axes
[ 1907.437] (--) evdev: MosArt Optical Mouse: Found x and y relative axes
[ 1907.437] (II) evdev: MosArt Optical Mouse: Configuring as mouse
[ 1907.437] (II) evdev: MosArt Optical Mouse: Adding scrollwheel support
[ 1907.437] (**) evdev: MosArt Optical Mouse: YAxisMapping: buttons 4 and 5
[ 1907.437] (**) evdev: MosArt Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 1907.437] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1c.2/usb4/4-1/4-1:1.0/input/input4/event4"
[ 1907.437] (II) XINPUT: Adding extended input device "MosArt Optical Mouse" (type: MOUSE, id 8)
[ 1907.437] (II) evdev: MosArt Optical Mouse: initialized for relative axes.
[ 1907.438] (**) MosArt Optical Mouse: (accel) keeping acceleration scheme 1
[ 1907.438] (**) MosArt Optical Mouse: (accel) acceleration profile 0
[ 1907.438] (**) MosArt Optical Mouse: (accel) acceleration factor: 2.000
[ 1907.438] (**) MosArt Optical Mouse: (accel) acceleration threshold: 4
[ 1907.438] (II) config/udev: Adding input device MosArt Optical Mouse (/dev/input/mouse0)
[ 1907.438] (II) No input driver specified, ignoring this device.
[ 1907.438] (II) This device may have been added with another device file.
[ 1907.439] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 1907.439] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 1907.439] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 1907.439] (**) AT Translated Set 2 keyboard: always reports core events
[ 1907.439] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 1907.439] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 1907.439] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 1907.439] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 1907.439] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 1907.439] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[ 1907.439] (**) Option "xkb_rules" "evdev"
[ 1907.439] (**) Option "xkb_model" "evdev"
[ 1907.439] (**) Option "xkb_layout" "us"
[ 1907.440] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
[ 1907.440] (II) No input driver specified, ignoring this device.
[ 1907.440] (II) This device may have been added with another device file.
EndSection
Вариант для распечатки
(??) on 24-Фев-13, 03:13 
