Все настраивал по официальной документации.
1)Машина в домене
2)wbinfo работает
3)ntlm_auth тоже из командной строки

На Радиусе пользователи авторизуются Локальный(/etc/passwd) и те что указаны в файле users.... а вот из Домена не хотят.

Вот лог radiusd -X

Config:   including file: /usr/local/freeradius//etc/raddb/proxy.conf
Config:   including file: /usr/local/freeradius//etc/raddb/clients.conf
Config:   including file: /usr/local/freeradius//etc/raddb/snmp.conf
Config:   including file: /usr/local/freeradius//etc/raddb/eap.conf
Config:   including file: /usr/local/freeradius//etc/raddb/sql.conf
main: prefix = "/usr/local/freeradius/"
main: localstatedir = "/usr/local/freeradius//var"
main: logdir = "/var/log/freeradius"
main: libdir = "/usr/local/freeradius//lib"
main: radacctdir = "/var/log/freeradius/radacct"
main: hostname_lookups = no
main: max_request_time = 30
main: cleanup_delay = 5
main: max_requests = 1024
main: delete_blocked_requests = 0
main: port = 1812
main: allow_core_dumps = no
main: log_stripped_names = no
main: log_file = "/var/log/freeradius/radius.log"
main: log_auth = no
main: log_auth_badpass = no
main: log_auth_goodpass = no
main: pidfile = "/usr/local/freeradius//var/run/radiusd/radiusd.pid"
main: bind_address = 192.168.0.1 IP address [192.168.0.1]
main: user = "(null)"
main: group = "(null)"
main: usercollide = no
main: lower_user = "no"
main: lower_pass = "no"
main: nospace_user = "no"
main: nospace_pass = "no"
main: checkrad = "/usr/local/freeradius//sbin/checkrad"
main: proxy_requests = yes
proxy: retry_delay = 5
proxy: retry_count = 3
proxy: synchronous = no
proxy: default_fallback = yes
proxy: dead_time = 120
proxy: post_proxy_authorize = no
proxy: wake_all_if_all_dead = no
security: max_attributes = 200
security: reject_delay = 1
security: status_server = no
main: debug_level = 0
read_config_files:  reading dictionary
read_config_files:  reading naslist
Using deprecated naslist file.  Support for this will go away soon.
read_config_files:  reading clients
read_config_files:  reading realms
radiusd:  entering modules setup
Module: Library search path is /usr/local/freeradius/lib
Module: Loaded exec
exec: wait = yes
exec: program = "(null)"
exec: input_pairs = "request"
exec: output_pairs = "(null)"
exec: packet_type = "(null)"
rlm_exec: Wait=yes but no output defined. Did you mean output=none?
Module: Instantiated exec (exec)
Module: Loaded expr
Module: Instantiated expr (expr)
Module: Loaded PAP
pap: encryption_scheme = "crypt"
pap: auto_header = yes
Module: Instantiated pap (pap)
Module: Loaded CHAP
Module: Instantiated chap (chap)
Module: Loaded MS-CHAP
mschap: use_mppe = yes
mschap: require_encryption = yes
mschap: require_strong = yes
mschap: with_ntdomain_hack = yes
mschap: passwd = "(null)"
mschap: ntlm_auth = "/usr/bin/ntlm_auth --request-nt-key --domain=%{mschap:NT-Domain} --username=%{mschap:User-Name} --challenge=%{mschap:Challenge:-00} --nt-response=%{mschap:NT-Response:-00}"
Module: Instantiated mschap (mschap)
Module: Loaded System
unix: cache = no
unix: passwd = "(null)"
unix: shadow = "(null)"
unix: group = "(null)"
unix: radwtmp = "/var/log/freeradius/radwtmp"
unix: usegroup = no
unix: cache_reload = 600
Module: Instantiated unix (unix)
Module: Loaded eap
eap: default_eap_type = "peap"
eap: timer_expire = 60
eap: ignore_unknown_eap_types = no
eap: cisco_accounting_username_bug = no
rlm_eap: Loaded and initialized type md5
rlm_eap: Loaded and initialized type leap
gtc: challenge = "Password: "
gtc: auth_type = "PAP"
rlm_eap: Loaded and initialized type gtc
tls: rsa_key_exchange = no
tls: dh_key_exchange = yes
tls: rsa_key_length = 512
tls: dh_key_length = 512
tls: verify_depth = 0
tls: CA_path = "(null)"
tls: pem_file_type = yes
tls: private_key_file = "/usr/local/freeradius/etc/raddb/certs/my.key"
tls: certificate_file = "/usr/local/freeradius/etc/raddb/certs/my.crt"
tls: CA_file = "/usr/local/freeradius/etc/raddb/certs/my.crt"
tls: private_key_password = "(null)"
tls: dh_file = "/usr/local/freeradius/etc/raddb/certs/dh"
tls: random_file = "/dev/urandom"
tls: fragment_size = 1024
tls: include_length = yes
tls: check_crl = no
tls: check_cert_cn = "(null)"
tls: cipher_list = "(null)"
tls: check_cert_issuer = "(null)"
rlm_eap_tls: Loading the certificate file as a chain
rlm_eap: Loaded and initialized type tls
peap: default_eap_type = "mschapv2"
peap: copy_request_to_tunnel = no
peap: use_tunneled_reply = no
peap: proxy_tunneled_request_as_eap = yes
rlm_eap: Loaded and initialized type peap
mschapv2: with_ntdomain_hack = no
rlm_eap: Loaded and initialized type mschapv2
Module: Instantiated eap (eap)
Module: Loaded preprocess
preprocess: huntgroups = "/usr/local/freeradius//etc/raddb/huntgroups"
preprocess: hints = "/usr/local/freeradius//etc/raddb/hints"
preprocess: with_ascend_hack = no
preprocess: ascend_channels_per_line = 23
preprocess: with_ntdomain_hack = no
preprocess: with_specialix_jetstream_hack = no
preprocess: with_cisco_vsa_hack = no
preprocess: with_alvarion_vsa_hack = no
Module: Instantiated preprocess (preprocess)
Module: Loaded realm
realm: format = "suffix"
realm: delimiter = "@"
realm: ignore_default = no
realm: ignore_null = no
Module: Instantiated realm (suffix)
realm: format = "prefix"
realm: delimiter = "\"
realm: ignore_default = no
realm: ignore_null = no
Module: Instantiated realm (ntdomain)
Module: Loaded files
files: usersfile = "/usr/local/freeradius//etc/raddb/users"
files: acctusersfile = "/usr/local/freeradius//etc/raddb/acct_users"
files: preproxy_usersfile = "/usr/local/freeradius//etc/raddb/preproxy_users"
files: compat = "no"
Module: Instantiated files (files)
Module: Loaded Acct-Unique-Session-Id
acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port"
Module: Instantiated acct_unique (acct_unique)
Module: Loaded detail
detail: detailfile = "/var/log/freeradius/radacct/%{Client-IP-Address}/detail-%Y%m%d"
detail: detailperm = 384
detail: dirperm = 493
detail: locking = no
Module: Instantiated detail (detail)
Module: Loaded radutmp
radutmp: filename = "/var/log/freeradius/radutmp"
radutmp: username = "%{User-Name}"
radutmp: case_sensitive = yes
radutmp: check_with_nas = yes
radutmp: perm = 384
radutmp: callerid = yes
Module: Instantiated radutmp (radutmp)
Listening on authentication 192.168.0.1:1812
Listening on accounting 192.168.0.1:1813
Ready to process requests.

rad_recv: Access-Request packet from host 192.168.0.2:4531, id=0, length=65
        User-Name = "MYDOMAIN\\login"
        User-Password = "password"
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 0
  modcall[authorize]: module "preprocess" returns ok for request 0
  modcall[authorize]: module "chap" returns noop for request 0
  modcall[authorize]: module "mschap" returns noop for request 0
    rlm_realm: No '@' in User-Name = "MYDOMAIN\login", looking up realm NULL
    rlm_realm: No such realm "NULL"
  modcall[authorize]: module "suffix" returns noop for request 0
    rlm_realm: Looking up realm "MYDOMAIN" for User-Name = "MYDOMAIN\login"
    rlm_realm: Found realm "DEFAULT"
    rlm_realm: Adding Stripped-User-Name = "login"
    rlm_realm: Proxying request from user login to realm DEFAULT
    rlm_realm: Adding Realm = "DEFAULT"
    rlm_realm: Authentication realm is LOCAL.
  modcall[authorize]: module "ntdomain" returns noop for request 0
  rlm_eap: No EAP-Message, not doing EAP
  modcall[authorize]: module "eap" returns noop for request 0
    users: Matched entry DEFAULT at line 153
  modcall[authorize]: module "files" returns ok for request 0
rlm_pap: WARNING! No "known good" password found for the user.  Authentication may fail because of this.
  modcall[authorize]: module "pap" returns noop for request 0
modcall: leaving group authorize (returns ok) for request 0
  rad_check_password:  Found Auth-Type System
auth: type "System"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 0
  modcall[authenticate]: module "unix" returns notfound for request 0
modcall: leaving group authenticate (returns notfound) for request 0
auth: Failed to validate the user.
Delaying request 0 for 1 seconds
Finished request 0
Going to the next request
--- Walking the entire request list ---
Waking up in 1 seconds...
--- Walking the entire request list ---
Waking up in 1 seconds...
--- Walking the entire request list ---
Sending Access-Reject of id 0 to 192.168.0.2 port 4531
Waking up in 4 seconds...

что может быть? если нужно что-то еще спрашивайте.