The OpenNET Project / Index page

[ новости/++ | форум | wiki | теги | ]

форумы  помощь  поиск  регистрация  майллист  вход/выход  слежка  RSS
"Sendmail для отсылки с сайта"
Вариант для распечатки  
Пред. тема | След. тема 
Форумы OpenNET: Виртуальная конференция (Public)
Изначальное сообщение [ Отслеживать ]

"Sendmail для отсылки с сайта"  
Сообщение от Doc email(ok) on 10-Фев-09, 15:56 
Народ , помогите настроить sendmail в простейшем режиме
необходимо чтобы он релеил почту отправленную php скриптом с веб сервера  на почтовый  сервер (внутри локалки) - на сервере на который отправляеться почта доступ принемать почту с этого сервака дан

добавил в конфиг

# "Smart" relay host (may be null)
DSmsg01.itgroup.local
но получаю вот такой лог (при этом сервер резолвиться в dns и по смтп на почтовыих телнет с веб сервера проходит)

Feb 10 15:20:24 inpas sendmail[6114]: n1ACJg9J006112: n1ACKO9J006114: DSN: Host unknown (Name server: 10.129.1.30: host not found)
Feb 10 15:20:25 inpas sendmail[6114]: n1ACKO9J006114: to=root, delay=00:00:01, xdelay=00:00:00, mailer=local, pri=31745, dsn=2.0.0, stat=Sent
Feb 10 15:20:25 inpas sendmail[6114]: n1ACJg9J006112: n1ACKO9K006114: postmaster notify: Host unknown (Name server: 10.129.1.30: host not found)
Feb 10 15:20:25 inpas sendmail[6114]: n1ACKO9K006114: to=root, delay=00:00:00, xdelay=00:00:00, mailer=local, pri=30000, dsn=2.0.0, stat=Sent
Feb 10 15:20:47 inpas sendmail[6101]: restarting /usr/sbin/sendmail due to signal
Feb 10 15:20:47 inpas sendmail[6136]: starting daemon (8.13.6): SMTP+queueing@00:30:00
Feb 10 15:20:53 inpas sendmail[6146]: n1ACKqP2006146: from=wwwrun, size=251, class=0, nrcpts=1, msgid=<200902101220.n1ACKqP2006146@inpas.itgroup.local>, body
Feb 10 15:20:55 inpas sendmail[6147]: n1ACKrPe006147: from=<wwwrun@inpas.itgroup.local>, size=484, class=0, nrcpts=1, msgid=<200902101220.n1ACKqP2006146@inpa
Feb 10 15:20:55 inpas sendmail[6146]: n1ACKqP2006146: to=aksenov@inpas.ru, ctladdr=wwwrun (30/8), delay=00:00:03, xdelay=00:00:02, mailer=relay, pri=30251, r
Feb 10 15:21:35 inpas sendmail[6149]: n1ACKrPe006147: to=<aksenov@inpas.ru>, ctladdr=<wwwrun@inpas.itgroup.local> (30/8), delay=00:00:40, xdelay=00:00:40, ma
Feb 10 15:21:35 inpas sendmail[6149]: n1ACKrPe006147: n1ACLZPe006149: DSN: Host unknown (Name server: 10.24.3.50: host not found)
Feb 10 15:21:35 inpas sendmail[6149]: n1ACLZPe006149: to=root, delay=00:00:00, xdelay=00:00:00, mailer=local, pri=31745, dsn=2.0.0, stat=Sent
Feb 10 15:21:35 inpas sendmail[6149]: n1ACKrPe006147: n1ACLZPf006149: postmaster notify: Host unknown (Name server: 10.24.3.50: host not found)
Feb 10 15:21:35 inpas sendmail[6149]: n1ACLZPf006149: to=root, delay=00:00:00, xdelay=00:00:00, mailer=local, pri=30000, dsn=2.0.0, stat=Sent
Feb 10 15:23:43 inpas sendmail[6136]: restarting /usr/sbin/sendmail due to signal
Feb 10 15:23:43 inpas sendmail[6213]: starting daemon (8.13.6): SMTP+queueing@00:30:00
Feb 10 15:23:54 inpas sendmail[6224]: n1ACNsR1006224: from=wwwrun, size=251, class=0, nrcpts=1, msgid=<200902101223.n1ACNsR1006224@inpas.itgroup.local>, body
Feb 10 15:23:56 inpas sendmail[6225]: n1ACNs0J006225: from=<wwwrun@inpas.itgroup.local>, size=484, class=0, nrcpts=1, msgid=<200902101223.n1ACNsR1006224@inpa
Feb 10 15:23:57 inpas sendmail[6224]: n1ACNsR1006224: to=aksenov@inpas.ru, ctladdr=wwwrun (30/8), delay=00:00:03, xdelay=00:00:03, mailer=relay, pri=30251, r
Feb 10 15:25:17 inpas sendmail[6227]: n1ACNs0J006225: to=<aksenov@inpas.ru>, ctladdr=<wwwrun@inpas.itgroup.local> (30/8), delay=00:01:21, xdelay=00:01:20, ma
Feb 10 15:25:17 inpas sendmail[6227]: n1ACNs0J006225: n1ACPH0J006227: DSN: Host unknown (Name server: msg01.itgroup.local: host not found)
Feb 10 15:25:17 inpas sendmail[6227]: n1ACPH0J006227: to=root, delay=00:00:00, xdelay=00:00:00, mailer=local, pri=31745, dsn=2.0.0, stat=Sent
Feb 10 15:25:17 inpas sendmail[6227]: n1ACNs0J006225: n1ACPH0K006227: postmaster notify: Host unknown (Name server: msg01.itgroup.local: host not found)
Feb 10 15:25:17 inpas sendmail[6227]: n1ACPH0K006227: to=root, delay=00:00:00, xdelay=00:00:00, mailer=local, pri=30000, dsn=2.0.0, stat=Sent

Высказать мнение | Ответить | Правка | Cообщить модератору

 Оглавление

Сообщения по теме [Сортировка по времени | RSS]


1. "Sendmail для отсылки с сайта"  
Сообщение от Michael (??) on 10-Фев-09, 16:09 
>Feb 10 15:25:17 inpas sendmail[6227]: n1ACNs0J006225: n1ACPH0J006227: DSN: Host unknown (Name server: msg01.itgroup.local: host not found)

пишет, что не может найти в днс имя msg01.itgroup.local


Высказать мнение | Ответить | Правка | Наверх | Cообщить модератору

2. "Sendmail для отсылки с сайта"  
Сообщение от Doc email(ok) on 10-Фев-09, 16:18 
>>Feb 10 15:25:17 inpas sendmail[6227]: n1ACNs0J006225: n1ACPH0J006227: DSN: Host unknown (Name server: msg01.itgroup.local: host not found)
>
>пишет, что не может найти в днс имя msg01.itgroup.local

дык я это понял .... но вот лукап с этого сервака
inpas:/var/log # nslookup
> msg01.itgroup.local

Server:         10.24.1.20
Address:        10.24.1.20#53

Name:   msg01.itgroup.local
Address: 10.24.3.50
> exit

также пробывал прописывать ип
заместо имени  тотже результат


Высказать мнение | Ответить | Правка | Наверх | Cообщить модератору

3. "Sendmail для отсылки с сайта"  
Сообщение от Doc email(ok) on 10-Фев-09, 18:11 
>>Feb 10 15:25:17 inpas sendmail[6227]: n1ACNs0J006225: n1ACPH0J006227: DSN: Host unknown (Name server: msg01.itgroup.local: host not found)
>
>пишет, что не может найти в днс имя msg01.itgroup.local

это я понял , но вот лукап с сэтого сервака все находит

inpas:/var/log # nslookup
> msg01.itgroup.local

Server:         10.24.1.20
Address:        10.24.1.20#53

Name:   msg01.itgroup.local
Address: 10.24.3.50
> exit

и прописывал за место имени непосредственно ип ... таже ошибка только с ипом вместо имени

Высказать мнение | Ответить | Правка | Наверх | Cообщить модератору

4. "Sendmail для отсылки с сайта"  
Сообщение от Michael (??) on 10-Фев-09, 23:31 
>и прописывал за место имени непосредственно ип ... таже ошибка только с
>ипом вместо имени
>

тогда вариант N 2. такую ошибку сендмаил выдает и в некоторых других случаях
mc файл в студию

Высказать мнение | Ответить | Правка | Наверх | Cообщить модератору

5. "Sendmail для отсылки с сайта"  
Сообщение от Doc email(ok) on 11-Фев-09, 12:52 
>>и прописывал за место имени непосредственно ип ... таже ошибка только с
>>ипом вместо имени
>>
>
>тогда вариант N 2. такую ошибку сендмаил выдает и в некоторых других
>случаях
>mc файл в студию

ну там изменен только параметр описанный выше

# level 10 config file format
V10/Berkeley


O DontBlameSendmail=Safe


#D{sendmailMTACluster}$m

# file containing names of hosts for which we receive email
Fw-o /etc/mail/local-host-names %[^\#]

# my official domain name
# ... define this only if sendmail cannot automatically determine your domain
#Dj$w.Foo.COM

# host/domain names ending with a token in class P are canonical
CP.

# "Smart" relay host (may be null)
DSmsg01.itgroup.local


# operators that cannot be in local usernames (i.e., network indicators)
CO @ % !

# a class with just dot (for identifying canonical names)
C..

# a class with just a left bracket (for identifying domain literals)
C[[

# access_db acceptance class
C{Accept}OK RELAY


# Resolve map (to check if a host exists in check_mail)
Kresolve host -a<OKR> -T<TEMP>
C{ResOk}OKR


# Hosts for which relaying is permitted ($=R)
FR-o /etc/mail/relay-domains %[^\#]

# arithmetic map
Karith arith
# macro storage map
Kmacro macro
# possible values for TLS_connection in access map
C{Tls}VERIFY ENCR

# dequoting map
Kdequote dequote

# class E: names that should be exposed as from this host, even if we masquerade
# class L: names that should be delivered locally, even if we have a relay
# class M: domains that should be converted to $M
# class N: domains that should not be converted to $M
#CL root
C{G}inpas.itgroup.local
F{G}/etc/mail/local-host-names
C{E}root

# my name for error messages
DnMAILER-DAEMON


# Mailer table (overriding domains)
Kmailertable hash -o /etc/mail/mailertable.db

# Generics table (mapping outgoing addresses)
Kgenerics hash -o /etc/mail/genericstable.db

# Virtual user table (maps incoming users)
Kvirtuser hash -o /etc/mail/virtusertable.db


# Access list database (for spam stomping)
Kaccess hash -T<TMPF> -o /etc/mail/access.db

CPREDIRECT


# Configuration version number
DZ8.13.6/SuSE Linux 0.8

# strip message body to 7 bits on input?
O SevenBitInput=False

# 8-bit data handling
#O EightBitMode=pass8

# wait for alias file rebuild (default units: minutes)
O AliasWait=10

# location of alias file
O AliasFile=/etc/aliases

# minimum number of free blocks on filesystem
O MinFreeBlocks=100

# maximum message size
#O MaxMessageSize=0

# substitution for space (blank) characters
O BlankSub=.

# avoid connecting to "expensive" mailers on initial submission?
O HoldExpensive=False

# checkpoint queue runs after every N successful deliveries
#O CheckpointInterval=10

# default delivery mode
O DeliveryMode=background

# error message header/file
#O ErrorHeader=/etc/mail/error-header

# error mode
#O ErrorMode=print

# save Unix-style "From_" lines at top of header?
#O SaveFromLine=False

# queue file mode (qf files)
#O QueueFileMode=0600

# temporary file mode
O TempFileMode=0600

# match recipients against GECOS field?
#O MatchGECOS=False

# maximum hop count
#O MaxHopCount=25

# location of help file
O HelpFile=/usr/lib/sendmail.d/helpfile

# ignore dots as terminators in incoming messages?
#O IgnoreDots=False

# name resolver options
#O ResolverOptions=+AAONLY

# deliver MIME-encapsulated error messages?
O SendMimeErrors=True

# Forward file search path
O ForwardPath=$z/.forward.$w+$h:$z/.forward+$h:$z/.forward.$w:$z/.forward

# open connection cache size
O ConnectionCacheSize=2

# open connection cache timeout
O ConnectionCacheTimeout=5m

# persistent host status directory
O HostStatusDirectory=.hoststat

# single thread deliveries (requires HostStatusDirectory)?
#O SingleThreadDelivery=False

# use Errors-To: header?
O UseErrorsTo=False

# log level
O LogLevel=9

# send to me too, even in an alias expansion?
#O MeToo=True

# verify RHS in newaliases?
O CheckAliases=False

# default messages to old style headers if no special punctuation?
O OldStyleHeaders=True

# SMTP daemon options
O DaemonPortOptions=Name=MTA

# SMTP client options
#O ClientPortOptions=Family=inet, Address=0.0.0.0

# Modifiers to define {daemon_flags} for direct submissions
#O DirectSubmissionModifiers

# Use as mail submission program? See sendmail/SECURITY
#O UseMSP

# privacy flags
O PrivacyOptions=authwarnings,needmailhelo,novrfy,noexpn,noverb

# who (if anyone) should get extra copies of error messages
O PostmasterCopy=Postmaster

# slope of queue-only function
#O QueueFactor=600000

# limit on number of concurrent queue runners
#O MaxQueueChildren

# maximum number of queue-runners per queue-grouping with multiple queues
#O MaxRunnersPerQueue=1

# priority of queue runners (nice(3))
#O NiceQueueRun

# shall we sort the queue by hostname first?
#O QueueSortOrder=priority

# minimum time in queue before retry
#O MinQueueAge=30m

# how many jobs can you process in the queue?
#O MaxQueueRunSize=0

# perform initial split of envelope without checking MX records
#O FastSplit=1

# queue directory
O QueueDirectory=/var/spool/mqueue

# key for shared memory; 0 to turn off
#O SharedMemoryKey=0

# timeouts (many of these)
#O Timeout.initial=5m
#O Timeout.connect=5m
#O Timeout.aconnect=0s
O Timeout.iconnect=30s
#O Timeout.helo=5m
#O Timeout.mail=10m
#O Timeout.rcpt=1h
#O Timeout.datainit=5m
#O Timeout.datablock=1h
#O Timeout.datafinal=1h
#O Timeout.rset=5m
#O Timeout.quit=2m
#O Timeout.misc=2m
#O Timeout.command=1h
O Timeout.ident=0s
#O Timeout.fileopen=60s
#O Timeout.control=2m
O Timeout.queuereturn=5d
#O Timeout.queuereturn.normal=5d
#O Timeout.queuereturn.urgent=2d
#O Timeout.queuereturn.non-urgent=7d
#O Timeout.queuereturn.dsn=5d
O Timeout.queuewarn=4h
#O Timeout.queuewarn.normal=4h
#O Timeout.queuewarn.urgent=1h
#O Timeout.queuewarn.non-urgent=12h
#O Timeout.queuewarn.dsn=4h
#O Timeout.hoststatus=30m
#O Timeout.resolver.retrans=5s
#O Timeout.resolver.retrans.first=5s
#O Timeout.resolver.retrans.normal=5s
#O Timeout.resolver.retry=4
#O Timeout.resolver.retry.first=4
#O Timeout.resolver.retry.normal=4
#O Timeout.lhlo=2m
#O Timeout.auth=10m
#O Timeout.starttls=1h

# time for DeliverBy; extension disabled if less than 0
#O DeliverByMin=0

# should we not prune routes in route-addr syntax addresses?
#O DontPruneRoutes=False

# queue up everything before forking?
O SuperSafe=True

# status file
O StatusFile=/var/lib/sendmail/statistics

# time zone handling:
#  if undefined, use system default
#  if defined but null, use TZ envariable passed in
#  if defined and non-null, use that info
#O TimeZoneSpec=

# default UID (can be username or userid:groupid)
O DefaultUser=daemon:daemon

# list of locations of user database file (null means no lookup)
O UserDatabaseSpec=/etc/mail/userdb.db

# fallback MX host
#O FallbackMXhost=fall.back.host.net

# fallback smart host
#O FallbackSmartHost=fall.back.host.net

# if we are the best MX host for a site, try it directly instead of config err
#O TryNullMXList=False

# load average at which we just queue messages
#O QueueLA=8

# load average at which we refuse connections
#O RefuseLA=12

# log interval when refusing connections for this long
#O RejectLogInterval=3h

# load average at which we delay connections; 0 means no limit
#O DelayLA=0

# maximum number of children we allow at one time
O MaxDaemonChildren=15

# maximum number of new connections per second
#O ConnectionRateThrottle=0

# Width of the window
#O ConnectionRateWindowSize=60s

# work recipient factor
#O RecipientFactor=30000

# deliver each queued job in a separate process?
#O ForkEachJob=False

# work class factor
#O ClassFactor=1800

# work time factor
#O RetryFactor=90000

# default character set
#O DefaultCharSet=unknown-8bit

# service switch file (name hardwired on Solaris, Ultrix, OSF/1, others)
O ServiceSwitchFile=/etc/mail/service.switch

# hosts file (normally /etc/hosts)
O HostsFile=/etc/hosts

# dialup line delay on connection failure
#O DialDelay=0s

# action to take if there are no recipients in the message
O NoRecipientAction=add-to-undisclosed

# chrooted environment for writing to files
#O SafeFileEnvironment

# are colons OK in addresses?
#O ColonOkInAddr=True

# shall I avoid expanding CNAMEs (violates protocols)?
#O DontExpandCnames=False

# SMTP initial login message (old $e macro)
O SmtpGreetingMessage=$j Sendmail $v/$Z; $b

# UNIX initial From header format (old $l macro)
O UnixFromLine=From $g $d

# From: lines that have embedded newlines are unwrapped onto one line
#O SingleLineFromHeader=False

# Allow HELO SMTP command that does not include a host name
#O AllowBogusHELO=False

# Characters to be quoted in a full name phrase (@,;:\()[] are automatic)
#O MustQuoteChars=.

# delimiter (operator) characters (old $o macro)
O OperatorChars=.:%@!^/[]+

# shall I avoid calling initgroups(3) because of high NIS costs?
#O DontInitGroups=False

# are group-writable :include: and .forward files (un)trustworthy?
# True (the default) means they are not trustworthy.
#O UnsafeGroupWrites=True


# where do errors that occur when sending errors get sent?
#O DoubleBounceAddress=postmaster

# where to save bounces if all else fails
O DeadLetterDrop=/var/log/dead.letter

# what user id do we assume for the majority of the processing?
#O RunAsUser=sendmail

# maximum number of recipients per SMTP envelope
#O MaxRecipientsPerMessage=0

# limit the rate recipients per SMTP envelope are accepted
# once the threshold number of recipients have been rejected
#O BadRcptThrottle=0

# shall we get local names from our installed interfaces?
#O DontProbeInterfaces=False

# Return-Receipt-To: header implies DSN request
#O RrtImpliesDsn=False

# override connection address (for testing)
#O ConnectOnlyTo=0.0.0.0

# Trusted user for file ownership and starting the daemon
#O TrustedUser=root

# Control socket for daemon management
O ControlSocketName=/var/run/sendmail/control

# Maximum MIME header length to protect MUAs
O MaxMimeHeaderLength=256/128

# Maximum length of the sum of all headers
O MaxHeadersLength=32768

# Maximum depth of alias recursion
#O MaxAliasRecursion=10

# location of pid file
#O PidFile=/var/run/sendmail.pid

# Prefix string for the process title shown on 'ps' listings
#O ProcessTitlePrefix=prefix

# Data file (df) memory-buffer file maximum size
#O DataFileBufferSize=4096

# Transcript file (xf) memory-buffer file maximum size
#O XscriptFileBufferSize=4096

# lookup type to find information about local mailboxes
#O MailboxDatabase=pw

# override compile time flag REQUIRES_DIR_FSYNC
#O RequiresDirfsync=true

# list of authentication mechanisms
#O AuthMechanisms=EXTERNAL GSSAPI KERBEROS_V4 DIGEST-MD5 CRAM-MD5

# Authentication realm
#O AuthRealm

# default authentication information for outgoing connections
#O DefaultAuthInfo=/etc/mail/default-auth-info

# SMTP AUTH flags
#O AuthOptions

# SMTP AUTH maximum encryption strength
#O AuthMaxBits

# SMTP STARTTLS server options
#O TLSSrvOptions

# Input mail filters
#O InputMailFilters


# CA directory
O CACertPath=/etc/mail/certs
# CA file
#O CACertFile
# Server Cert
#O ServerCertFile
# Server private key
#O ServerKeyFile
# Client Cert
#O ClientCertFile
# Client private key
#O ClientKeyFile
# File containing certificate revocation lists
#O CRLFile
# DHParameters (only required if DSA/DH is used)
#O DHParameters
# Random data source (required for systems without /dev/urandom under OpenSSL)
#O RandFile


Pfirst-class=0
Pspecial-delivery=100
Plist=-30
Pbulk=-60
Pjunk=-100

# this is equivalent to setting class "t"
Ft-o /etc/mail/trusted-users %[^\#]
Troot
Tdaemon
Tuucp
Tmdom vscan wwwrun root uucp daemon mail


H?P?Return-Path: <$g>
HReceived: $?sfrom $s $.$?_($?s$|from $.$_)
    $.$?{auth_type}(authenticated$?{auth_ssf} bits=${auth_ssf}$.)
    $.by $j ($v/$Z)$?r with $r$. id $i$?{tls_version}
    (version=${tls_version} cipher=${cipher} bits=${cipher_bits} verify=${verify})$.$?u
    for $u; $|;
    $.$b
H?D?Resent-Date: $a
H?D?Date: $a
H?F?Resent-From: $?x$x <$g>$|$g$.
H?F?From: $?x$x <$g>$|$g$.
H?x?Full-Name: $x
# HPosted-Date: $a
# H?l?Received-Date: $b
H?M?Resent-Message-Id: <$t.$i@$j>
H?M?Message-Id: <$t.$i@$j>


Scanonify=3

# handle null input (translate to <@> special case)
R$@            $@ <@>

# strip group: syntax (not inside angle brackets!) and trailing semicolon
R$*            $: $1 <@>            mark addresses
R$* < $* > $* <@>    $: $1 < $2 > $3            unmark <addr>
R@ $* <@>        $: @ $1                unmark @host:...
R$* [ IPv6 : $+ ] <@>    $: $1 [ IPv6 : $2 ]        unmark IPv6 addr
R$* :: $* <@>        $: $1 :: $2            unmark node::addr
R:include: $* <@>    $: :include: $1            unmark :include:...
R$* : $* [ $* ]        $: $1 : $2 [ $3 ] <@>        remark if leading colon
R$* : $* <@>        $: $2                strip colon if marked
R$* <@>            $: $1                unmark
R$* ;               $1                strip trailing semi
R$* < $+ :; > $*    $@ $2 :; <@>            catch <list:;>
R$* < $* ; >           $1 < $2 >            bogus bracketed semi

# null input now results from list:; syntax
R$@            $@ :; <@>

# strip angle brackets -- note RFC733 heuristic to get innermost item
R$*            $: < $1 >            housekeeping <>
R$+ < $* >           < $2 >            strip excess on left
R< $* > $+           < $1 >            strip excess on right
R<>            $@ < @ >            MAIL FROM:<> case
R< $+ >            $: $1                remove housekeeping <>

# strip route address <@a,@b,@c:user@d> -> <user@d>
R@ $+ , $+        $2
R@ [ $* ] : $+        $2
R@ $+ : $+        $2

# find focus for list syntax
R $+ : $* ; @ $+    $@ $>Canonify2 $1 : $2 ; < @ $3 >    list syntax
R $+ : $* ;        $@ $1 : $2;            list syntax

# find focus for @ syntax addresses
R$+ @ $+        $: $1 < @ $2 >            focus on domain
R$+ < $+ @ $+ >        $1 $2 < @ $3 >            move gaze right
R$+ < @ $+ >        $@ $>Canonify2 $1 < @ $2 >    already canonical


# convert old-style addresses to a domain-based address
R$- ! $+        $@ $>Canonify2 $2 < @ $1 .UUCP >    resolve uucp names
R$+ . $- ! $+        $@ $>Canonify2 $3 < @ $1 . $2 >        domain uucps
R$+ ! $+        $@ $>Canonify2 $2 < @ $1 .UUCP >    uucp subdomains

# if we have % signs, take the rightmost one
R$* % $*        $1 @ $2                First make them all @s.
R$* @ $* @ $*        $1 % $2 @ $3            Undo all but the last.
R$* @ $*        $@ $>Canonify2 $1 < @ $2 >    Insert < > and finish

# else we must be a local name
R$*            $@ $>Canonify2 $1

SCanonify2=96

# handle special cases for local names
R$* < @ localhost > $*        $: $1 < @ $j . > $2        no domain at all
R$* < @ localhost . $m > $*    $: $1 < @ $j . > $2        local domain
R$* < @ localhost . UUCP > $*    $: $1 < @ $j . > $2        .UUCP domain

# check for IPv4/IPv6 domain literal
R$* < @ [ $+ ] > $*        $: $1 < @@ [ $2 ] > $3        mark [addr]
R$* < @@ $=w > $*        $: $1 < @ $j . > $3        self-literal
R$* < @@ $+ > $*        $@ $1 < @ $2 > $3        canon IP addr

# if really UUCP, handle it immediately

# try UUCP traffic as a local address
R$* < @ $+ . UUCP > $*        $: $1 < @ $[ $2 $] . UUCP . > $3
R$* < @ $+ . . UUCP . > $*    $@ $1 < @ $2 . > $3

# hostnames ending in class P are always canonical
R$* < @ $* $=P > $*        $: $1 < @ $2 $3 . > $4
R$* < @ $* $~P > $*        $: $&{daemon_flags} $| $1 < @ $2 $3 > $4
R$* CC $* $| $* < @ $+.$+ > $*    $: $3 < @ $4.$5 . > $6
R$* CC $* $| $*            $: $3
# pass to name server to make hostname canonical
R$* $| $* < @ $* > $*        $: $2 < @ $[ $3 $] > $4
R$* $| $*            $: $2

# local host aliases and pseudo-domains are always canonical
R$* < @ $=w > $*        $: $1 < @ $2 . > $3
R$* < @ $=M > $*        $: $1 < @ $2 . > $3
R$* < @ $={VirtHost} > $*     $: $1 < @ $2 . > $3
R$* < @ $* $=G > $*     $: $1 < @ $2 $3 . > $4
R$* < @ $* . . > $*        $1 < @ $2 . > $3

Sfinal=4

R$+ :; <@>        $@ $1 :                handle <list:;>
R$* <@>            $@                handle <> and list:;

# strip trailing dot off possibly canonical name
R$* < @ $+ . > $*    $1 < @ $2 > $3

# eliminate internal code
R$* < @ *LOCAL* > $*    $1 < @ $j > $2

# externalize local domain info
R$* < $+ > $*        $1 $2 $3            defocus
R@ $+ : @ $+ : $+    @ $1 , @ $2 : $3        <route-addr> canonical
R@ $*            $@ @ $1                ... and exit

# UUCP must always be presented in old form
R$+ @ $- . UUCP        $2!$1                u@h.UUCP => h!u

# delete duplicate local names
R$+ % $=w @ $=w        $1 @ $2                u%host@host => u@host

SRecurse=97
R$*            $: $>canonify $1
R$*            $@ $>parse $1

Sparse=0

R$*            $: $>Parse0 $1        initial parsing
R<@>            $#local $: <@>        special case error msgs
R$*            $: $>ParseLocal $1    handle local hacks
R$*            $: $>Parse1 $1        final parsing

#
#  Parse0 -- do initial syntax checking and eliminate local addresses.
#    This should either return with the (possibly modified) input
#    or return with a #error mailer.  It should not return with a
#    #mailer other than the #error mailer.
#

SParse0
R<@>            $@ <@>            special case error msgs
R$* : $* ; <@>        $#error $@ 5.1.3 $: "553 List:; syntax illegal for recipient addresses"
R@ <@ $* >        < @ $1 >        catch "@@host" bogosity
R<@ $+>            $#error $@ 5.1.3 $: "553 User address required"
R$+ <@>            $#error $@ 5.1.3 $: "553 Hostname required"
R$*            $: <> $1
R<> $* < @ [ $* ] : $+ > $*    $1 < @ [ $2 ] : $3 > $4
R<> $* < @ [ $* ] , $+ > $*    $1 < @ [ $2 ] , $3 > $4
R<> $* < @ [ $* ] $+ > $*    $#error $@ 5.1.2 $: "553 Invalid address"
R<> $* < @ [ $+ ] > $*        $1 < @ [ $2 ] > $3
R<> $* <$* : $* > $*    $#error $@ 5.1.3 $: "553 Colon illegal in host name part"
R<> $*            $1
R$* < @ . $* > $*    $#error $@ 5.1.2 $: "553 Invalid host name"
R$* < @ $* .. $* > $*    $#error $@ 5.1.2 $: "553 Invalid host name"
R$* < @ $* @ > $*    $#error $@ 5.1.2 $: "553 Invalid route address"
R$* @ $* < @ $* > $*    $#error $@ 5.1.3 $: "553 Invalid route address"
R$* , $~O $*        $#error $@ 5.1.3 $: "553 Invalid route address"


# now delete the local info -- note $=O to find characters that cause forwarding
R$* < @ > $*        $@ $>Parse0 $>canonify $1    user@ => user
R< @ $=w . > : $*    $@ $>Parse0 $>canonify $2    @here:... -> ...
R$- < @ $=w . >        $: $(dequote $1 $) < @ $2 . >    dequote "foo"@here
R< @ $+ >        $#error $@ 5.1.3 $: "553 User address required"
R$* $=O $* < @ $=w . >    $@ $>Parse0 $>canonify $1 $2 $3    ...@here -> ...
R$-             $: $(dequote $1 $) < @ *LOCAL* >    dequote "foo"
R< @ *LOCAL* >        $#error $@ 5.1.3 $: "553 User address required"
R$* $=O $* < @ *LOCAL* >
            $@ $>Parse0 $>canonify $1 $2 $3    ...@*LOCAL* -> ...
R$* < @ *LOCAL* >    $: $1

#
#  Parse1 -- the bottom half of ruleset 0.
#

SParse1

# handle numeric address spec
R$* < @ [ $+ ] > $*    $: $>ParseLocal $1 < @ [ $2 ] > $3    numeric internet spec
R$* < @ [ $+ ] > $*    $: $1 < @ [ $2 ] : $S > $3    Add smart host to path
R$* < @ [ $+ ] : > $*        $#esmtp $@ [$2] $: $1 < @ [$2] > $3    no smarthost: send
R$* < @ [ $+ ] : $- : $*> $*    $#$3 $@ $4 $: $1 < @ [$2] > $5    smarthost with mailer
R$* < @ [ $+ ] : $+ > $*    $#esmtp $@ $3 $: $1 < @ [$2] > $4    smarthost without mailer

# handle virtual users
R$+            $: <!> $1        Mark for lookup
R<!> $+ < @ $={VirtHost} . >     $: < $(virtuser $1 @ $2 $@ $1 $: @ $) > $1 < @ $2 . >
R<!> $+ < @ $=w . >     $: < $(virtuser $1 @ $2 $@ $1 $: @ $) > $1 < @ $2 . >
R<@> $+ + $+ < @ $* . >
            $: < $(virtuser $1 + + @ $3 $@ $1 $@ $2 $@ +$2 $: @ $) > $1 + $2 < @ $3 . >
R<@> $+ + $* < @ $* . >
            $: < $(virtuser $1 + * @ $3 $@ $1 $@ $2 $@ +$2 $: @ $) > $1 + $2 < @ $3 . >
R<@> $+ + $* < @ $* . >
            $: < $(virtuser $1 @ $3 $@ $1 $@ $2 $@ +$2 $: @ $) > $1 + $2 < @ $3 . >
R<@> $+ + $+ < @ $+ . >    $: < $(virtuser + + @ $3 $@ $1 $@ $2 $@ +$2 $: @ $) > $1 + $2 < @ $3 . >
R<@> $+ + $* < @ $+ . >    $: < $(virtuser + * @ $3 $@ $1 $@ $2 $@ +$2 $: @ $) > $1 + $2 < @ $3 . >
R<@> $+ + $* < @ $+ . >    $: < $(virtuser @ $3 $@ $1 $@ $2 $@ +$2 $: ! $) > $1 + $2 < @ $3 . >
R<@> $+ < @ $+ . >    $: < $(virtuser @ $2 $@ $1 $: @ $) > $1 < @ $2 . >
R<@> $+            $: $1
R<!> $+            $: $1
R< error : $-.$-.$- : $+ > $*     $#error $@ $1.$2.$3 $: $4
R< error : $- $+ > $*     $#error $@ $(dequote $1 $) $: $2
R< $+ > $+ < @ $+ >    $: $>Recurse $1

# short circuit local delivery so forwarded email works


R$=L < @ $=w . >    $#local $: @ $1            special local names
R$+ < @ $=w . >        $#local $: $1            regular local name

# not local -- try mailer table lookup
R$* <@ $+ > $*        $: < $2 > $1 < @ $2 > $3    extract host name
R< $+ . > $*        $: < $1 > $2            strip trailing dot
R< $+ > $*        $: < $(mailertable $1 $) > $2    lookup
R< $~[ : $* > $*     $>MailerToTriple < $1 : $2 > $3        check -- resolved?
R< $+ > $*        $: $>Mailertable <$1> $2        try domain

# resolve locally connected UUCP links
R$* < @ $=Z . UUCP. > $*    $#uucp-uudom $@ $2 $: $1 < @ $2 .UUCP. > $3
R$* < @ $=Y . UUCP. > $*    $#uucp-new $@ $2 $: $1 < @ $2 .UUCP. > $3
R$* < @ $=U . UUCP. > $*    $#uucp-old $@ $2 $: $1 < @ $2 .UUCP. > $3

Высказать мнение | Ответить | Правка | Наверх | Cообщить модератору

6. "Sendmail для отсылки с сайта"  
Сообщение от Doc email(ok) on 11-Фев-09, 12:53 
# resolve remotely connected UUCP links (if any)

# resolve fake top level domains by forwarding to other hosts

# forward other UUCP traffic straight to UUCP
R$* < @ $+ .UUCP. > $*        $#uucp-old $@ $2 $: $1 < @ $2 .UUCP. > $3    user@host.UUCP


# pass names that still have a host to a smarthost (if defined)
R$* < @ $* > $*        $: $>MailerToTriple < $S > $1 < @ $2 > $3    glue on smarthost name

# deal with other remote names
R$* < @$* > $*        $#esmtp $@ $2 $: $1 < @ $2 > $3    user@host.domain

# handle locally delivered names
R$=L            $#local $: @ $1        special local names
R$+            $#local $: $1            regular local names

SLocal_localaddr
Slocaladdr=5
R$+            $: $1 $| $>"Local_localaddr" $1
R$+ $| $#ok        $@ $1            no change
R$+ $| $#$*        $#$2
R$+ $| $*        $: $1


# deal with plussed users so aliases work nicely
R$+ + *            $#local $@ $&h $: $1
R$+ + $*        $#local $@ + $2 $: $1 + *

# prepend an empty "forward host" on the front
R$+            $: <> $1


R< > $+            $: < > < $1 <> $&h >        nope, restore +detail

R< > < $+ <> + $* >    $: < > < $1 + $2 >        check whether +detail
R< > < $+ <> $* >    $: < > < $1 >            else discard
R< > < $+ + $* > $*       < > < $1 > + $2 $3        find the user part
R< > < $+ > + $*    $#local $@ $2 $: @ $1        strip the extra +
R< > < $+ >        $@ $1                no +detail
R$+            $: $1 <> $&h            add +detail back in

R$+ <> + $*        $: $1 + $2            check whether +detail
R$+ <> $*        $: $1                else discard
R< local : $* > $*    $: $>MailerToTriple < local : $1 > $2    no host extension
R< error : $* > $*    $: $>MailerToTriple < error : $1 > $2    no host extension

R< $~[ : $+ > $+    $: $>MailerToTriple < $1 : $2 > $3 < @ $2 >

R< $+ > $+        $@ $>MailerToTriple < $1 > $2 < @ $1 >


SMailertable=90
R$* <$- . $+ > $*    $: $1$2 < $(mailertable .$3 $@ $1$2 $@ $2 $) > $4
R$* <$~[ : $* > $*    $>MailerToTriple < $2 : $3 > $4        check -- resolved?
R$* < . $+ > $*     $@ $>Mailertable $1 . <$2> $3        no -- strip & try again
R$* < $* > $*        $: < $(mailertable . $@ $1$2 $) > $3    try "."
R< $~[ : $* > $*    $>MailerToTriple < $1 : $2 > $3        "." found?
R< $* > $*        $@ $2                no mailertable match


SMailerToTriple=95
R< > $*                $@ $1            strip off null relay
R< error : $-.$-.$- : $+ > $*     $#error $@ $1.$2.$3 $: $4
R< error : $- : $+ > $*        $#error $@ $(dequote $1 $) $: $2
R< error : $+ > $*        $#error $: $1
R< local : $* > $*        $>CanonLocal < $1 > $2
R< $~[ : $+ @ $+ > $*<$*>$*    $# $1 $@ $3 $: $2<@$3>    use literal user
R< $~[ : $+ > $*        $# $1 $@ $2 $: $3    try qualified mailer
R< $=w > $*            $@ $2            delete local host
R< $+ > $*            $#relay $@ $1 $: $2    use unqualified mailer

SCanonLocal
# strip local host from routed addresses
R< $* > < @ $+ > : $+        $@ $>Recurse $3
R< $* > $+ $=O $+ < @ $+ >    $@ $>Recurse $2 $3 $4

# strip trailing dot from any host name that may appear
R< $* > $* < @ $* . >        $: < $1 > $2 < @ $3 >

# handle local: syntax -- use old user, either with or without host
R< > $* < @ $* > $*        $#local $@ $1@$2 $: $1
R< > $+                $#local $@ $1    $: $1

# handle local:user@host syntax -- ignore host part
R< $+ @ $+ > $* < @ $* >    $: < $1 > $3 < @ $4 >

# handle local:user syntax
R< $+ > $* <@ $* > $*        $#local $@ $2@$3 $: $1
R< $+ > $*             $#local $@ $2    $: $1

SMasqHdr=93

# handle generics database
R$+ < @ $* $=G . >    $: < $1@$2$3 > $1 < @ $2$3 . > @    mark
R$+ < @ *LOCAL* >    $: < $1@$j > $1 < @ *LOCAL* > @    mark
R< $+ > $+ < $* > @    $: < $(generics $1 $: @ $1 $) > $2 < $3 >
R<@$+ + $* @ $+> $+ < @ $+ >
        $: < $(generics $1+*@$3 $@ $2 $:@$1 + $2@$3 $) >  $4 < @ $5 >
R<@$+ + $* @ $+> $+ < @ $+ >
        $: < $(generics $1@$3 $: $) > $4 < @ $5 >
R<@$+ > $+ < @ $+ >    $: < > $2 < @ $3 >
R< > $+ < @ $+ . >    $: < $(generics @$2 $@ $1 $: $) > $1 < @ $2 . >
R< > $+ < @ $+ >     $: < $(generics $1 $: $) > $1 < @ $2 >
R< > $+ + $* < @ $+ >     $: < $(generics $1+* $@ $2 $: $) > $1 + $2 < @ $3 >
R< > $+ + $* < @ $+ >     $: < $(generics $1 $: $) > $1 + $2 < @ $3 >
R< $* @ $* > $* < $* >    $@ $>canonify $1 @ $2        found qualified
R< $+ > $* < $* >    $: $>canonify $1 @ *LOCAL*    found unqualified
R< > $*            $: $1                not found

# do not masquerade anything in class N
R$* < @ $* $=N . >    $@ $1 < @ $2 $3 . >

R$* < @ *LOCAL* >    $@ $1 < @ $j . >


SMasqEnv=94
R$* < @ *LOCAL* > $*    $: $1 < @ $j . > $2


SParseLocal=98

# addresses sent to foo@host.REDIRECT will give a 551 error code
R$* < @ $+ .REDIRECT. >        $: $1 < @ $2 . REDIRECT . > < ${opMode} >
R$* < @ $+ .REDIRECT. > <i>    $: $1 < @ $2 . REDIRECT. >
R$* < @ $+ .REDIRECT. > < $- >    $#error $@ 5.1.1 $: "551 User has moved; please try " <$1@$2>

SD
R<$*> <$+> <$- $-> <$*>        $: < $(access $4:$1 $: ? $) > <$1> <$2> <$3 $4> <$5>
R<?> <$+> <$+> <+ $-> <$*>    $: < $(access $1 $: ? $) > <$1> <$2> <+ $3> <$4>
R<?> <[$+.$-]> <$+> <$- $-> <$*>    $@ $>D <[$1]> <$3> <$4 $5> <$6>
R<?> <[$+::$-]> <$+> <$- $-> <$*>    $: $>D <[$1]> <$3> <$4 $5> <$6>
R<?> <[$+:$-]> <$+> <$- $-> <$*>    $: $>D <[$1]> <$3> <$4 $5> <$6>
R<?> <$+.$+> <$+> <$- $-> <$*>    $@ $>D <$2> <$3> <$4 $5> <$6>
R<?> <$+> <$+> <$- $-> <$*>    $@ <$2> <$5>
R<$* <TMPF>> <$+> <$+> <$- $-> <$*>    $@ <<TMPF>> <$6>
R<$*> <$+> <$+> <$- $-> <$*>    $@ <$1> <$6>


SA
R<$+> <$+> <$- $-> <$*>        $: < $(access $4:$1 $: ? $) > <$1> <$2> <$3 $4> <$5>
R<?> <$+> <$+> <+ $-> <$*>    $: < $(access $1 $: ? $) > <$1> <$2> <+ $3> <$4>
R<?> <$+::$-> <$+> <$- $-> <$*>        $@ $>A <$1> <$3> <$4 $5> <$6>
R<?> <$+:$-> <$+> <$- $-> <$*>        $@ $>A <$1> <$3> <$4 $5> <$6>
R<?> <$+.$-> <$+> <$- $-> <$*>        $@ $>A <$1> <$3> <$4 $5> <$6>
R<?> <$+> <$+> <$- $-> <$*>    $@ <$2> <$5>
R<$* <TMPF>> <$+> <$+> <$- $-> <$*>    $@ <<TMPF>> <$6>
R<$*> <$+> <$+> <$- $-> <$*>    $@ <$1> <$6>

SCanonAddr
R$*            $: $>Parse0 $>canonify $1    make domain canonical


SParseRecipient
R$*                $: <?> $>CanonAddr $1
R<?> $* < @ $* . >        <?> $1 < @ $2 >            strip trailing dots
R<?> $- < @ $* >        $: <?> $(dequote $1 $) < @ $2 >    dequote local part

# if no $=O character, no host in the user portion, we are done
R<?> $* $=O $* < @ $* >        $: <NO> $1 $2 $3 < @ $4>
R<?> $*                $@ $1


R<NO> $* < @ $* $=R >        $: <RELAY> $1 < @ $2 $3 >
R<NO> $* < @ $+ >        $: $>D <$2> <NO> <+ To> <$1 < @ $2 >>
R<$+> <$+>            $: <$1> $2

R<RELAY> $* < @ $* >        $@ $>ParseRecipient $1
R<$+> $*            $@ $2


SLocal_check_relay
Scheck_relay
R$*            $: $1 $| $>"Local_check_relay" $1
R$* $| $* $| $#$*    $#$3
R$* $| $* $| $*        $@ $>"Basic_check_relay" $1 $| $2

SBasic_check_relay
# check for deferred delivery mode
R$*            $: < $&{deliveryMode} > $1
R< d > $*        $@ deferred
R< $* > $*        $: $2

R$+ $| $+        $: $>D < $1 > <?> <+ Connect> < $2 >
R   $| $+        $: $>A < $1 > <?> <+ Connect> <>    empty client_name
R<?> <$+>        $: $>A < $1 > <?> <+ Connect> <>    no: another lookup
R<?> <$*>        $: OK                found nothing
R<$={Accept}> <$*>    $@ $1                return value of lookup
R<REJECT> <$*>        $#error $@ 5.7.1 $: "550 Access denied"
R<DISCARD> <$*>        $#discard $: discard
R<QUARANTINE:$+> <$*>    $#error $@ quarantine $: $1
R<ERROR:$-.$-.$-:$+> <$*>    $#error $@ $1.$2.$3 $: $4
R<ERROR:$+> <$*>        $#error $: $1
R<$* <TMPF>> <$*>        $#error $@ 4.3.0 $: "451 Temporary system failure. Please try again later."
R<$+> <$*>        $#error $: $1

SLocal_check_mail
Scheck_mail
R$*            $: $1 $| $>"Local_check_mail" $1
R$* $| $#$*        $#$2
R$* $| $*        $@ $>"Basic_check_mail" $1

SBasic_check_mail
# check for deferred delivery mode
R$*            $: < $&{deliveryMode} > $1
R< d > $*        $@ deferred
R< $* > $*        $: $2

# authenticated?
R$*            $: $1 $| $>"tls_client" $&{verify} $| MAIL
R$* $| $#$+        $#$2
R$* $| $*        $: $1

R<>            $@ <OK>            we MUST accept <> (RFC 1123)
R$+            $: <?> $1
R<?><$+>        $: <@> <$1>
R<?>$+            $: <@> <$1>
R$*            $: $&{daemon_flags} $| $1
R$* f $* $| <@> < $* @ $- >    $: < ? $&{client_name} > < $3 @ $4 >
R$* u $* $| <@> < $* >    $: <?> < $3 >
R$* $| $*        $: $2
# handle case of @localhost on address
R<@> < $* @ localhost >    $: < ? $&{client_name} > < $1 @ localhost >
R<@> < $* @ [127.0.0.1] >
            $: < ? $&{client_name} > < $1 @ [127.0.0.1] >
R<@> < $* @ localhost.$m >
            $: < ? $&{client_name} > < $1 @ localhost.$m >
R<@> < $* @ localhost.UUCP >
            $: < ? $&{client_name} > < $1 @ localhost.UUCP >
R<@> $*            $: $1            no localhost as domain
R<? $=w> $*        $: $2            local client: ok
R<? $+> <$+>        $#error $@ 5.5.4 $: "553 Real domain name required for sender address"
R<?> $*            $: $1
R$*            $: <?> $>CanonAddr $1        canonify sender address and mark it
R<?> $* < @ $+ . >    <?> $1 < @ $2 >            strip trailing dots
# handle non-DNS hostnames (*.bitnet, *.decnet, *.uucp, etc)
R<?> $* < @ $* $=P >    $: <OKR> $1 < @ $2 $3 >
R<?> $* < @ $j >    $: <OKR> $1 < @ $j >
R<?> $* < @ $+ >    $: <? $(resolve $2 $: $2 <PERM> $) > $1 < @ $2 >
R<? $* <$->> $* < @ $+ >
            $: <$2> $3 < @ $4 >

# check sender address: user@address, user@, address
R<$+> $+ < @ $* >    $: @<$1> <$2 < @ $3 >> $| <F:$2@$3> <U:$2@> <D:$3>
R<$+> $+        $: @<$1> <$2> $| <U:$2@>
R@ <$+> <$*> $| <$+>    $: <@> <$1> <$2> $| $>SearchList <+ From> $| <$3> <>
R<@> <$+> <$*> $| <$*>    $: <$3> <$1> <$2>        reverse result
# retransform for further use
R<?> <$+> <$*>        $: <$1> $2    no match
R<$+> <$+> <$*>        $: <$1> $3    relevant result, keep it

# handle case of no @domain on address
R<?> $*            $: $&{daemon_flags} $| <?> $1
R$* u $* $| <?> $*    $: <OKR> $3
R$* $| $*        $: $2
R<?> $*            $: < ? $&{client_addr} > $1
R<?> $*            $@ <OKR>            ...local unqualed ok
R<? $+> $*        $#error $@ 5.5.4 $: "553 Domain name required for sender address " $&f
                            ...remote is not
# check results
R<?> $*            $: @ $1        mark address: nothing known about it
R<$={ResOk}> $*        $@ <OKR>    domain ok: stop
R<TEMP> $*        $#error $@ 4.1.8 $: "451 Domain of sender address " $&f " does not resolve"
R<PERM> $*        $#error $@ 5.1.8 $: "553 Domain of sender address " $&f " does not exist"
R<$={Accept}> $*    $# $1        accept from access map
R<DISCARD> $*        $#discard $: discard
R<QUARANTINE:$+> $*    $#error $@ quarantine $: $1
R<REJECT> $*        $#error $@ 5.7.1 $: "550 Access denied"
R<ERROR:$-.$-.$-:$+> $*        $#error $@ $1.$2.$3 $: $4
R<ERROR:$+> $*        $#error $: $1
R<<TMPF>> $*        $#error $@ 4.3.0 $: "451 Temporary system failure. Please try again later."
R<$+> $*        $#error $: $1        error from access db


SLocal_check_rcpt
Scheck_rcpt
R$*            $: $1 $| $>"Local_check_rcpt" $1
R$* $| $#$*        $#$2
R$* $| $*        $@ $>"Basic_check_rcpt" $1

SBasic_check_rcpt
# empty address?
R<>            $#error $@ nouser $: "553 User address required"
R$@            $#error $@ nouser $: "553 User address required"
# check for deferred delivery mode
R$*            $: < $&{deliveryMode} > $1
R< d > $*        $@ deferred
R< $* > $*        $: $2


######################################################################
R$*            $: $1 $| @ $>"Rcpt_ok" $1
R$* $| @ $#TEMP $+    $: $1 $| T $2
R$* $| @ $#$*        $#$2
R$* $| @ RELAY        $@ RELAY
R$* $| @ $*        $: O $| $>"Relay_ok" $1
R$* $| T $+        $: T $2 $| $>"Relay_ok" $1
R$* $| $#TEMP $+    $#error $2
R$* $| $#$*        $#$2
R$* $| RELAY        $@ RELAY
R T $+ $| $*        $#error $1
# anything else is bogus
R$*            $#error $@ 5.7.1 $: "550 Relaying denied"


SRcpt_ok
R$*            $: $>ParseRecipient $1        strip relayable hosts


# authenticated via TLS?
R$*            $: $1 $| $>RelayTLS    client authenticated?
R$* $| $# $+        $# $2            error/ok?
R$* $| $*        $: $1            no

R$*            $: $1 $| $>"Local_Relay_Auth" $&{auth_type}
R$* $| $# $*        $# $2
R$* $| NO        $: $1
R$* $| $*        $: $1 $| $&{auth_type}
R$* $|            $: $1
R$* $| $={TrustAuthMech}    $# RELAY
R$* $| $*        $: $1
# anything terminating locally is ok
R$+ < @ $=w >        $@ RELAY
R$+ < @ $* $=R >    $@ RELAY
R$+ < @ $+ >        $: $>D <$2> <?> <+ To> <$1 < @ $2 >>
R<RELAY> $*        $@ RELAY
R<$* <TMPF>> $*        $#TEMP $@ 4.3.0 $: "451 Temporary system failure. Please try again later."
R<$*> <$*>        $: $2

# check for local user (i.e. unqualified address)
R$*            $: <?> $1
R<?> $* < @ $+ >    $: <REMOTE> $1 < @ $2 >
# local user is ok
R<?> $+            $@ RELAY
R<$+> $*        $: $2

SRelay_ok
# anything originating locally is ok
# check IP address
R$*            $: $&{client_addr}
R$@            $@ RELAY        originated locally
R0            $@ RELAY        originated locally
R127.0.0.1        $@ RELAY        originated locally
RIPv6:::1        $@ RELAY        originated locally
R$=R $*            $@ RELAY        relayable IP address
R$*            $: $>A <$1> <?> <+ Connect> <$1>
R<RELAY> $*         $@ RELAY        relayable IP address

R<<TMPF>> $*        $#TEMP $@ 4.3.0 $: "451 Temporary system failure. Please try again later."
R<$*> <$*>        $: $2
R$*            $: [ $1 ]        put brackets around it...
R$=w            $@ RELAY        ... and see if it is local


# check client name: first: did it resolve?
R$*            $: < $&{client_resolve} >
R<TEMP>            $#TEMP $@ 4.4.0 $: "450 Relaying temporarily denied. Cannot resolve PTR record for " $&{client_addr}
R<FORGED>        $#error $@ 5.7.1 $: "550 Relaying denied. IP name possibly forged " $&{client_name}
R<FAIL>            $#error $@ 5.7.1 $: "550 Relaying denied. IP name lookup failed " $&{client_name}
R$*            $: <@> $&{client_name}
# pass to name server to make hostname canonical
R<@> $* $=P         $:<?>  $1 $2
R<@> $+            $:<?>  $[ $1 $]
R$* .            $1            strip trailing dots
R<?> $=w        $@ RELAY
R<?> $* $=R            $@ RELAY
R<?> $*            $: $>D <$1> <?> <+ Connect> <$1>
R<RELAY> $*        $@ RELAY
R<$* <TMPF>> $*        $#TEMP $@ 4.3.0 $: "451 Temporary system failure. Please try again later."
R<$*> <$*>        $: $2

SF
R<$+> <$*> <$- $-> <$*>        $: <$(access $4:$1 $: ? $)> <$1> <$2> <$3 $4> <$5>
R<?> <$+> <$*> <+ $-> <$*>    $: <$(access $1 $: ? $)> <$1> <$2> <+ $3> <$4>
R<?> <$+ + $* @ $+> <$*> <$- $-> <$*>
            $: <$(access $6:$1+*@$3 $: ? $)> <$1+$2@$3> <$4> <$5 $6> <$7>
R<?> <$+ + $* @ $+> <$*> <+ $-> <$*>
            $: <$(access $1+*@$3 $: ? $)> <$1+$2@$3> <$4> <+ $5> <$6>
R<?> <$+ + $* @ $+> <$*> <$- $-> <$*>
            $: <$(access $6:$1@$3 $: ? $)> <$1+$2@$3> <$4> <$5 $6> <$7>
R<?> <$+ + $* @ $+> <$*> <+ $-> <$*>
            $: <$(access $1@$3 $: ? $)> <$1+$2@$3> <$4> <+ $5> <$6>
R<?> <$+> <$*> <$- $-> <$*>    $@ <$2> <$5>
R<$+ <TMPF>> <$*> <$- $-> <$*>    $@ <<TMPF>> <$5>
R<$+> <$*> <$- $-> <$*>        $@ <$1> <$5>


SE
R<$*> <$*> <$- $-> <$*>        $: <$(access $4:$1 $: ? $)> <$1> <$2> <$3 $4> <$5>
R<?> <$+> <$*> <+ $-> <$*>    $: <$(access $1 $: ? $)> <$1> <$2> <+ $3> <$4>
R<?> <$+> <$*> <$- $-> <$*>    $@ <$2> <$5>
R<$+ <TMPF>> <$*> <$- $-> <$*>    $@ <<TMPF>> <$5>
R<$+> <$*> <$- $-> <$*>        $@ <$1> <$5>


SU
R<$+> <$*> <$- $-> <$*>        $: <$(access $4:$1 $: ? $)> <$1> <$2> <$3 $4> <$5>
R<?> <$+> <$*> <+ $-> <$*>    $: <$(access $1 $: ? $)> <$1> <$2> <+ $3> <$4>
R<?> <$+ + $* @> <$*> <$- $-> <$*>
            $: <$(access $5:$1+*@ $: ? $)> <$1+$2@> <$3> <$4 $5> <$6>
R<?> <$+ + $* @> <$*> <+ $-> <$*>
            $: <$(access $1+*@ $: ? $)> <$1+$2@> <$3> <+ $4> <$5>
R<?> <$+ + $* @> <$*> <$- $-> <$*>
            $: <$(access $5:$1@ $: ? $)> <$1+$2@> <$3> <$4 $5> <$6>
R<?> <$+ + $* @> <$*> <+ $-> <$*>
            $: <$(access $1@ $: ? $)> <$1+$2@> <$3> <+ $4> <$5>
R<?> <$+> <$*> <$- $-> <$*>    $@ <$2> <$5>
R<$+ <TMPF>> <$*> <$- $-> <$*>    $@ <<TMPF>> <$5>
R<$+> <$*> <$- $-> <$*>        $@ <$1> <$5>


# class with valid marks for SearchList
C{Src}E F D U
SSearchList
# just call the ruleset with the name of the tag... nice trick...
R<$+> $| <$={Src}:$*> <$*>    $: <$1> $| <$4> $| $>$2 <$3> <?> <$1> <>
R<$+> $| <> $| <?> <>        $@ <?>
R<$+> $| <$+> $| <?> <>        $@ $>SearchList <$1> $| <$2>
R<$+> $| <$*> $| <$+> <>    $@ <$3>
R<$+> $| <$+>            $@ <$2>

SLocal_trust_auth
Strust_auth
R$*            $: $&{auth_type} $| $1
# required by RFC 2554 section 4.
R$@ $| $*        $#error $@ 5.7.1 $: "550 not authenticated"
R$* $| $&{auth_authen}        $@ identical
R$* $| <$&{auth_authen}>    $@ identical
R$* $| $*        $: $1 $| $>"Local_trust_auth" $2
R$* $| $#$*        $#$2
R$*            $#error $@ 5.7.1 $: "550 " $&{auth_authen} " not allowed to act as " $&{auth_author}


SLocal_Relay_Auth


Ssrv_features
R$*        $: $>D <$&{client_name}> <?> <! "Srv_Features"> <>
R<?>$*        $: $>A <$&{client_addr}> <?> <! "Srv_Features"> <>
R<?>$*        $: <$(access "Srv_Features": $: ? $)>
R<?>$*        $@ OK
R<$* <TMPF>>$*    $#temp
R<$+>$*        $# $1

Stry_tls
R$*        $: $>D <$&{server_name}> <?> <! "Try_TLS"> <>
R<?>$*        $: $>A <$&{server_addr}> <?> <! "Try_TLS"> <>
R<?>$*        $: <$(access "Try_TLS": $: ? $)>
R<?>$*        $@ OK
R<$* <TMPF>>$*    $#error $@ 4.3.0 $: "451 Temporary system failure. Please try again later."
R<NO>$*        $#error $@ 5.7.1 $: "550 do not try TLS with " $&{server_name} " ["$&{server_addr}"]"


Stls_rcpt
R$*            $: $(macro {TLS_Name} $@ $&{server_name} $) $1
R$+            $: <?> $>CanonAddr $1
R<?> $+ < @ $+ . >    <?> $1 <@ $2 >
R<?> $+ < @ $+ >    $: $1 <@ $2 > $| <F:$1@$2> <U:$1@> <D:$2> <E:>
R<?> $+            $: $1 $| <U:$1@> <E:>
R$* $| $+    $: $1 $| $>SearchList <! "TLS_Rcpt"> $| $2 <>
R$* $| <?>    $@ OK
R$* $| <$* <TMPF>>    $#error $@ 4.3.0 $: "451 Temporary system failure. Please try again later."
R$* $| <$+>    $@ $>"TLS_connection" $&{verify} $| <$2>


Stls_client
R$*        $: $(macro {TLS_Name} $@ $&{server_name} $) $1
R$* $| $*    $: $1 $| $>D <$&{client_name}> <?> <! "TLS_Clt"> <>
R$* $| <?>$*    $: $1 $| $>A <$&{client_addr}> <?> <! "TLS_Clt"> <>
R$* $| <?>$*    $: $1 $| <$(access "TLS_Clt": $: ? $)>
R$* $| <$* <TMPF>>    $#error $@ 4.3.0 $: "451 Temporary system failure. Please try again later."
R$*        $@ $>"TLS_connection" $1


Stls_server
R$*        $: $(macro {TLS_Name} $@ $&{server_name} $) $1
R$*        $: $1 $| $>D <$&{server_name}> <?> <! "TLS_Srv"> <>
R$* $| <?>$*    $: $1 $| $>A <$&{server_addr}> <?> <! "TLS_Srv"> <>
R$* $| <?>$*    $: $1 $| <$(access "TLS_Srv": $: ? $)>
R$* $| <$* <TMPF>>    $#error $@ 4.3.0 $: "451 Temporary system failure. Please try again later."
R$*        $@ $>"TLS_connection" $1


STLS_connection
R$* $| <$*>$*            $: $1 $| <$2>
# create the appropriate error codes
R$* $| <PERM + $={Tls} $*>    $: $1 $| <503:5.7.0> <$2 $3>
R$* $| <TEMP + $={Tls} $*>    $: $1 $| <403:4.7.0> <$2 $3>
R$* $| <$={Tls} $*>        $: $1 $| <403:4.7.0> <$2 $3>
# deal with TLS handshake failures: abort
RSOFTWARE $| <$-:$+> $*     $#error $@ $2 $: $1 " TLS handshake failed."
RSOFTWARE $| $*         $#error $@ 4.7.0 $: "403 TLS handshake failed."
# deal with TLS protocol errors: abort
RPROTOCOL $| <$-:$+> $*     $#error $@ $2 $: $1 " STARTTLS failed."
RPROTOCOL $| $*         $#error $@ 4.7.0 $: "403 STARTTLS failed."
R$* $| <$*> <VERIFY>        $: <$2> <VERIFY> <> $1
R$* $| <$*> <VERIFY + $+>    $: <$2> <VERIFY> <$3> $1
R$* $| <$*> <$={Tls}:$->$*    $: <$2> <$3:$4> <> $1
R$* $| <$*> <$={Tls}:$- + $+>$*    $: <$2> <$3:$4> <$5> $1
R$* $| $*            $@ OK
# authentication required: give appropriate error
# other side did authenticate (via STARTTLS)
R<$*><VERIFY> <> OK        $@ OK
R<$*><VERIFY> <$+> OK        $: <$1> <REQ:0> <$2>
R<$*><VERIFY:$-> <$*> OK    $: <$1> <REQ:$2> <$3>
R<$*><ENCR:$-> <$*> $*        $: <$1> <REQ:$2> <$3>
R<$-:$+><VERIFY $*> <$*>    $#error $@ $2 $: $1 " authentication required"
R<$-:$+><VERIFY $*> <$*> FAIL    $#error $@ $2 $: $1 " authentication failed"
R<$-:$+><VERIFY $*> <$*> NO    $#error $@ $2 $: $1 " not authenticated"
R<$-:$+><VERIFY $*> <$*> NOT    $#error $@ $2 $: $1 " no authentication requested"
R<$-:$+><VERIFY $*> <$*> NONE    $#error $@ $2 $: $1 " other side does not support STARTTLS"
R<$-:$+><VERIFY $*> <$*> $+    $#error $@ $2 $: $1 " authentication failure " $4
R<$*><REQ:$-> <$*>        $: <$1> <REQ:$2> <$3> $>max $&{cipher_bits} : $&{auth_ssf}
R<$*><REQ:$-> <$*> $-        $: <$1> <$2:$4> <$3> $(arith l $@ $4 $@ $2 $)
R<$-:$+><$-:$-> <$*> TRUE    $#error $@ $2 $: $1 " encryption too weak " $4 " less than " $3
R<$-:$+><$-:$-> <$*> $*        $: <$1:$2 ++ $5>
R<$-:$+ ++ >            $@ OK
R<$-:$+ ++ $+ >            $: <$1:$2> <$3>
R<$-:$+> < $+ ++ $+ >        <$1:$2> <$3> <$4>
R<$-:$+> $+            $@ $>"TLS_req" $3 $| <$1:$2>

STLS_req
R $| $+        $@ OK
R<CN> $* $| <$+>        $: <CN:$&{TLS_Name}> $1 $| <$2>
R<CN:$&{cn_subject}> $* $| <$+>        $@ $>"TLS_req" $1 $| <$2>
R<CN:$+> $* $| <$-:$+>    $#error $@ $4 $: $3 " CN " $&{cn_subject} " does not match " $1
R<CS:$&{cert_subject}> $* $| <$+>    $@ $>"TLS_req" $1 $| <$2>
R<CS:$+> $* $| <$-:$+>    $#error $@ $4 $: $3 " Cert Subject " $&{cert_subject} " does not match " $1
R<CI:$&{cert_issuer}> $* $| <$+>    $@ $>"TLS_req" $1 $| <$2>
R<CI:$+> $* $| <$-:$+>    $#error $@ $4 $: $3 " Cert Issuer " $&{cert_issuer} " does not match " $1
ROK            $@ OK

Smax
R:        $: 0
R:$-        $: $1
R$-:        $: $1
R$-:$-        $: $(arith l $@ $1 $@ $2 $) : $1 : $2
RTRUE:$-:$-    $: $2
R$-:$-:$-    $: $2

SRelayTLS
# authenticated?
R$*            $: <?> $&{verify}
R<?> OK            $: OK        authenticated: continue
R<?> $*            $@ NO        not authenticated
R$*            $: $&{cert_issuer}
R$+            $: $(access CERTISSUER:$1 $)
RRELAY            $# RELAY
RSUBJECT        $: <@> $&{cert_subject}
R<@> $+            $: <@> $(access CERTSUBJECT:$1 $)
R<@> RELAY        $# RELAY
R$*            $: NO


Sauthinfo
R$*        $: $1 $| $>D <$&{server_name}> <?> <! AuthInfo> <>
R$* $| <?>$*    $: $1 $| $>A <$&{server_addr}> <?> <! AuthInfo> <>
R$* $| <?>$*    $: $1 $| <$(access AuthInfo: $: ? $)> <>
R$* $| <?>$*    $@ no                no authinfo available
R$* $| <$*> <>    $# $2


SLocal_greet_pause
Sgreet_pause
R$*            $: <$1><?> $| $>"Local_greet_pause" $1
R<$*><?> $| $#$*    $#$2
R<$*><?> $| $*        $: $1
R$+ $| $+        $: $>D < $1 > <?> <! GreetPause> < $2 >
R   $| $+        $: $>A < $1 > <?> <! GreetPause> <>    empty client_name
R<?> <$+>        $: $>A < $1 > <?> <! GreetPause> <>    no: another lookup
R<?> <$*>        $# 2000
R<$* <TMPF>> <$*>    $@
R<$+> <$*>        $# $1

SEnvFromL
R<@>            $n            errors to mailer-daemon
R@ <@ $*>        $n            temporarily bypass Sun bogosity
R$+            $: $>AddDomain $1    add local domain if needed
R$*            $: $>MasqEnv $1        do masquerading


SEnvToL
R$+ < @ $* >        $: $1            strip host part

SHdrFromL
R<@>            $n            errors to mailer-daemon
R@ <@ $*>        $n            temporarily bypass Sun bogosity
R$+            $: $>AddDomain $1    add local domain if needed
R$*            $: $>MasqHdr $1        do masquerading


SHdrToL
R$+            $: $>AddDomain $1    add local domain if needed
R$* < @ *LOCAL* > $*    $: $1 < @ $j . > $2


SAddDomain
R$* < @ $* > $*     $@ $1 < @ $2 > $3    already fully qualified

R$+            $@ $1 < @ *LOCAL* >    add local qualification

SMasqSMTP
R$* < @ $* > $*        $@ $1 < @ $2 > $3        already fully qualified
R$+            $@ $1 < @ *LOCAL* >        add local qualification


SPseudoToReal

# pass <route-addr>s through
R< @ $+ > $*        $@ < @ $1 > $2            resolve <route-addr>


R$+ < @ $+ .UUCP. >    $: < $2 ! > $1            convert to UUCP form
R$+ < @ $* > $*        $@ $1 < @ $2 > $3        not UUCP form

# leave these in .UUCP form to avoid further tampering
R< $&h ! > $- ! $+    $@ $2 < @ $1 .UUCP. >
R< $&h ! > $-.$+ ! $+    $@ $3 < @ $1.$2 >
R< $&h ! > $+        $@ $1 < @ $&h .UUCP. >
R< $+ ! > $+        $: $1 ! $2 < @ $Y >        use UUCP_RELAY
R$+ < @ $~[ $* : $+ >    $@ $1 < @ $4 >            strip mailer: part
R$+ < @ >        $: $1 < @ *LOCAL* >        if no UUCP_RELAY

SEnvFromSMTP
R$+            $: $>PseudoToReal $1        sender/recipient common
R$* :; <@>        $@                list:; special case
R$*            $: $>MasqSMTP $1        qualify unqual'ed names
R$+            $: $>MasqEnv $1            do masquerading

SEnvToSMTP
R$+            $: $>PseudoToReal $1        sender/recipient common
R$+            $: $>MasqSMTP $1        qualify unqual'ed names
R$* < @ *LOCAL* > $*    $: $1 < @ $j . > $2


SHdrFromSMTP
R$+            $: $>PseudoToReal $1        sender/recipient common
R:; <@>            $@                list:; special case

# do special header rewriting
R$* <@> $*        $@ $1 <@> $2            pass null host through
R< @ $* > $*        $@ < @ $1 > $2            pass route-addr through
R$*            $: $>MasqSMTP $1        qualify unqual'ed names
R$+            $: $>MasqHdr $1            do masquerading

SMasqRelay
R$+            $: $>MasqSMTP $1
R$+            $: $>MasqHdr $1


SFromU

# handle error address as a special case
R<@>                $n            errors to mailer-daemon

# list:; syntax should disappear
R:; <@>                $@

R$* < @ $* . > $*        $1 < @ $2 > $3        strip trailing dots
R$* < @ $=w >            $1            strip local name
R<@ $- . UUCP > : $+        $1 ! $2            convert to UUCP format
R<@ $+ > : $+            $1 ! $2            convert to UUCP format
R$* < @ $- . UUCP >        $2 ! $1            convert to UUCP format
R$* < @ $+ >            $2 ! $1            convert to UUCP format
R$&h ! $+ ! $+            $@ $1 ! $2        $h!...!user => ...!user
R$&h ! $+            $@ $&h ! $1        $h!user => $h!user
R$+                $: $U ! $1        prepend our name
R! $+                $: $k ! $1        in case $U undefined


SEnvToU

# list:; should disappear
R:; <@>                $@

R$* < @ $* . > $*        $1 < @ $2 > $3        strip trailing dots
R$* < @ $=w >            $1            strip local name
R<@ $- . UUCP > : $+        $1 ! $2            convert to UUCP format
R<@ $+ > : $+            $1 ! $2            convert to UUCP format
R$* < @ $- . UUCP >        $2 ! $1            convert to UUCP format
R$* < @ $+ >            $2 ! $1            convert to UUCP format


SHdrToU

# list:; syntax should disappear
R:; <@>                $@

R$* < @ $* . > $*        $1 < @ $2 > $3        strip trailing dots
R$* < @ $=w >            $1            strip local name
R<@ $- . UUCP > : $+        $1 ! $2            convert to UUCP format
R<@ $+ > : $+            $1 ! $2            convert to UUCP format
R$* < @ $- . UUCP >        $2 ! $1            convert to UUCP format
R$* < @ $+ >            $2 ! $1            convert to UUCP format
R$&h ! $+ ! $+            $@ $1 ! $2        $h!...!user => ...!user
R$&h ! $+            $@ $&h ! $1        $h!user => $h!user
R$+                $: $U ! $1        prepend our name
R! $+                $: $k ! $1        in case $U undefined

SEnvFromUD

# handle error address as a special case
R<@>                $n            errors to mailer-daemon

# pass everything to standard SMTP mailer rewriting
R$*                $@ $>EnvFromSMTP $1

#
#  envelope sender rewriting for uucp-uudom mailer
#
SEnvFromUUD

# handle error address as a special case
R<@>                $n            errors to mailer-daemon

# do standard SMTP mailer rewriting
R$*                $: $>EnvFromSMTP $1

R$* < @ $* . > $*        $1 < @ $2 > $3        strip trailing dots
R<@ $- . UUCP > : $+        $@ $1 ! $2        convert to UUCP format
R<@ $+ > : $+            $@ $1 ! $2        convert to UUCP format
R$* < @ $- . UUCP >        $@ $2 ! $1        convert to UUCP format
R$* < @ $+ >            $@ $2 ! $1        convert to UUCP format


Mlocal,        P=/usr/bin/procmail, F=lsDFMAw5:/|@qSPfhn09, S=EnvFromL/HdrFromL, R=EnvToL/HdrToL,
        T=DNS/RFC822/X-Unix,
        A=procmail -a $h -d $u
Mprog,        P=/bin/sh, F=lsDFMoqeu09, S=EnvFromL/HdrFromL, R=EnvToL/HdrToL, D=$z:/,
        T=X-Unix/X-Unix/X-Unix,
        A=sh -c $u


Msmtp,        P=[IPC], F=mDFMuX, S=EnvFromSMTP/HdrFromSMTP, R=EnvToSMTP, E=\r\n, L=990,
        T=DNS/RFC822/SMTP,
        A=TCP $h
Mesmtp,        P=[IPC], F=mDFMuXa, S=EnvFromSMTP/HdrFromSMTP, R=EnvToSMTP, E=\r\n, L=990,
        T=DNS/RFC822/SMTP,
        A=TCP $h
Msmtp8,        P=[IPC], F=mDFMuX8, S=EnvFromSMTP/HdrFromSMTP, R=EnvToSMTP, E=\r\n, L=990,
        T=DNS/RFC822/SMTP,
        A=TCP $h
Mdsmtp,        P=[IPC], F=mDFMuXa%, S=EnvFromSMTP/HdrFromSMTP, R=EnvToSMTP, E=\r\n, L=990,
        T=DNS/RFC822/SMTP,
        A=TCP $h
Mrelay,        P=[IPC], F=mDFMuXa8, S=EnvFromSMTP/HdrFromSMTP, R=MasqSMTP, E=\r\n, L=2040,
        T=DNS/RFC822/SMTP,
        A=TCP $h


Mprocmail,    P=/usr/bin/procmail, F=DFMSPhnu9, S=EnvFromSMTP/HdrFromSMTP, R=EnvToSMTP/HdrFromSMTP,
        T=DNS/RFC822/X-Unix,
        A=procmail -m $h $f $u


# old UUCP mailer (two names)
Muucp,        P=/usr/bin/uux, F=DFMhuUd, S=FromU, R=EnvToU/HdrToU,
        M=2000000, T=X-UUCP/X-UUCP/X-Unix,
        A=uux - -r -a$g -gC $h!rmail ($u)
Muucp-old,    P=/usr/bin/uux, F=DFMhuUd, S=FromU, R=EnvToU/HdrToU,
        M=2000000, T=X-UUCP/X-UUCP/X-Unix,
        A=uux - -r -a$g -gC $h!rmail ($u)

# smart UUCP mailer (handles multiple addresses) (two names)
Msuucp,        P=/usr/bin/uux, F=mDFMhuUd, S=FromU, R=EnvToU/HdrToU,
        M=2000000, T=X-UUCP/X-UUCP/X-Unix,
        A=uux - -r -a$g -gC $h!rmail ($u)
Muucp-new,    P=/usr/bin/uux, F=mDFMhuUd, S=FromU, R=EnvToU/HdrToU,
        M=2000000, T=X-UUCP/X-UUCP/X-Unix,
        A=uux - -r -a$g -gC $h!rmail ($u)

# domain-ized UUCP mailer
Muucp-dom,    P=/usr/bin/uux, F=mDFMhud, S=EnvFromUD/HdrFromSMTP, R=EnvToSMTP,
        M=2000000, T=X-UUCP/X-UUCP/X-Unix,
        A=uux - -r -a$g -gC $h!rmail ($u)

# domain-ized UUCP mailer with UUCP-style sender envelope
Muucp-uudom,    P=/usr/bin/uux, F=mDFMhud, S=EnvFromUUD/HdrFromSMTP, R=EnvToSMTP,
        M=2000000, T=X-UUCP/X-UUCP/X-Unix,
        A=uux - -r -a$g -gC $h!rmail ($u)


Mbsmtp,        P=/usr/lib/bsmtp/bsmtp, F=DFmMnuX8,
        S=EnvFromSMTP/HdrFromSMTP, R=EnvToSMTP, E=\r\n, L=990,
        T=DNS/RFC822/SMTP,
        A=bsmtp -f $g $h $u

Mfido,        P=/usr/lib/ifmail/ifmail, F=msSDFMuC, S=EnvFromUD/HdrFromSMTP, R=EnvToSMTP,
        M=2000000, T=X-UUCP/X-UUCP/X-Unix,
        A=ifmail $u -r$h


O MatchGECOS=False

Высказать мнение | Ответить | Правка | Наверх | Cообщить модератору

7. "Sendmail для отсылки с сайта"  
Сообщение от Michael (??) on 12-Фев-09, 10:01 
будет проще разобраться, если вы выложите именно mc файл, а не cf. потому как проверять второй целиком довольно проблематично
Высказать мнение | Ответить | Правка | Наверх | Cообщить модератору

8. "Sendmail для отсылки с сайта"  
Сообщение от Doc email(ok) on 12-Фев-09, 11:16 
>будет проще разобраться, если вы выложите именно mc файл, а не cf.
>потому как проверять второй целиком довольно проблематично

спасибо за помошь , только сегодня утром понял в чем проблемма - оказалось внутренний почтовик *екчендж) не пускал писма с пустым сабжектами :) а именно с таким отпралялись письма с сата .... отправил ручками через скрипт все пришло

попинал програмеров, должны поправить ...

Высказать мнение | Ответить | Правка | Наверх | Cообщить модератору

Архив | Удалить

Индекс форумов | Темы | Пред. тема | След. тема
Оцените тред (1=ужас, 5=супер)? [ 1 | 2 | 3 | 4 | 5 ] [Рекомендовать для помещения в FAQ]


  Закладки на сайте
  Проследить за страницей
Created 1996-2018 by Maxim Chirkov  
ДобавитьПоддержатьВебмастеруГИД  
Hosting by Ihor