настраиваю  диал-ин сервер mgetty+pppd
настройки
login.config :
/AutoPPP/ - a_ppp /usr/local/sbin/pppd  debug  +pap -chap auth login
options.ttyS0:
192.168.1.61:192.168.1.222
allow-ip
proxyarp
asyncmap 0
lock
debug
logfile /var/log/pppd.log
noccp
noipx
при  звонке  с вин. машины после регистрации компьютера в сети , появляется в  трее
подключение и через секунду слетает , в  логах pppd пишет :
using channel 62
Using interface ppp0
Connect: ppp0 <--> /dev/ttyS0
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth pap> <magic 0x5ff2f525> <pcomp> <accomp>]
rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <auth pap> <magic 0x5ff2f525> <pcomp> <accomp>]
rcvd [LCP ConfReq id=0x2 <asyncmap 0x0> <magic 0x63475869> <pcomp> <accomp> <callback CBCP> <mrru 1614> <endpoint [local:16.
8c.93.e7.80.f6.44.67.94.f8.c8.30.91.19.37.a8.00.00.00.00]>]
sent [LCP ConfRej id=0x2 <callback CBCP> <mrru 1614>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth pap> <magic 0x5ff2f525> <pcomp> <accomp>]
rcvd [LCP ConfReq id=0x3 <asyncmap 0x0> <magic 0x63475869> <pcomp> <accomp> <endpoint [local:16.8c.93.e7.80.f6.44.67.94.f8.c
8.30.91.19.37.a8.00.00.00.00]>]
sent [LCP ConfAck id=0x3 <asyncmap 0x0> <magic 0x63475869> <pcomp> <accomp> <endpoint [local:16.8c.93.e7.80.f6.44.67.94.f8.c
8.30.91.19.37.a8.00.00.00.00]>]
rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <auth pap> <magic 0x5ff2f525> <pcomp> <accomp>]
rcvd [LCP code=0xc id=0x4 63 47 58 69 4d 53 52 41 53 56 35 2e 30 30]
sent [LCP CodeRej id=0x2 0c 04 00 12 63 47 58 69 4d 53 52 41 53 56 35 2e 30 30]
rcvd [LCP code=0xc id=0x5 63 47 58 69 4d 53 52 41 53 2d 31 2d 49 4e 42 41 4e 4b]
sent [LCP CodeRej id=0x3 0c 05 00 16 63 47 58 69 4d 53 52 41 53 2d 31 2d 49 4e 42 41 4e 4b]
rcvd [PAP AuthReq id=0x24 user="tsolre" password=<hidden>]
user tsolre logged in
unknown host proxyarp in auth. address list
sent [PAP AuthAck id=0x24 "Login ok"]
PAP peer authentication succeeded for tsolre
sent [IPCP ConfReq id=0x1 <compress VJ 0f 01> <addr 192.168.1.61>]
rcvd [CCP ConfReq id=0x6 <mppe -H -M -S -L -D +C>]
Unsupported protocol 'Compression Control Protocol' (0x80fd) received
sent [LCP ProtRej id=0x4 80 fd 01 06 00 0a 12 06 00 00 00 01]
rcvd [IPCP ConfReq id=0x7 <compress VJ 0f 01> <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-wins 0.0.0.0> <ms-dns3 0.0.0.0> <ms-wins
0.0.0.0>]
sent [IPCP ConfRej id=0x7 <ms-dns1 0.0.0.0> <ms-wins 0.0.0.0> <ms-dns3 0.0.0.0> <ms-wins 0.0.0.0>]
rcvd [IPCP ConfAck id=0x1 <compress VJ 0f 01> <addr 192.168.1.61>]
rcvd [IPCP ConfReq id=0x8 <compress VJ 0f 01> <addr 0.0.0.0>]
sent [IPCP ConfNak id=0x8 <addr 192.168.1.222>]
rcvd [IPCP ConfReq id=0x9 <compress VJ 0f 01> <addr 192.168.1.222>]
sent [IPCP ConfAck id=0x9 <compress VJ 0f 01> <addr 192.168.1.222>]
Peer is not authorized to use remote address 192.168.1.222
Connect time 0.1 minutes.
Sent 70 bytes, received 98 bytes.
sent [IPCP TermReq id=0x2 "Unauthorized remote IP address"]
sent [IPCP TermReq id=0x3 "Unauthorized remote IP address"]
sent [LCP TermReq id=0x5 "No network protocols running"]
rcvd [IPCP TermAck id=0x2 "Unauthorized remote IP address"]
Discarded non-LCP packet when LCP not open
Hangup (SIGHUP)
Modem hangup
Connection terminated.
Connect time 0.2 minutes.
Sent 138 bytes, received 1442 bytes.
вроде поставил allow-ip  , что  не так делаю или  не указываю ?
спасибо