The OpenNET Project / Index page

[ новости /+++ | форум | wiki | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 ТемаНаборКатегория 
 
 [Cписок руководств | Печать]

usbvc (7)
  • >> usbvc (7) ( Solaris man: Макропакеты и соглашения )
  •  

    NAME

    usbvc - USB video class driver
     
    

    SYNOPSIS

    #include <sys/usb/clients/video/usbvc/usbvc.h>
    
    #include <sys/videodev2.h>
    
    usbvc@unit-address
    

    
    

     

    DESCRIPTION

    The usbvc driver is a USBA (Solaris USB Architecture)-compliant client driver that supports the USB Device Class Definition for Video Devices specification, Versions 1.0 and 1.1. The usbvc driver supports a subset of the video controls and formats described in the USB specification.

    The usbvc driver also implements the Video4Linux2 API (V4L2), Version 0.20 for applications. For more information on the V4L2 API, visit http://www.thedirks.org/v4l2.

    Note that the usbvc driver supports the video capture function only and that video output is not supported. For more information on supported USB video-class devices and functions, visit http://www.sun.com/io.  

    READING DATA

    The usbvc driver reads video data from the isochronous endpoint of the device. Bulk data endpoints are not supported.

    MJPEG and UNCOMPRESSED video formats are supported. Isochronous data are read from the isochronous input device frame-by-frame and are maintained in a buffer array within the driver. Video frames are read from the driver using the read(2) or mmap(2) I/O method. For read(2), each read returns a buffer of a video frame. For mmap(2), each VIDIOC_DQBUF ioctl returns the buffer structure v4l2_buffer. (A video frame buffer pointer is included in the structure). See the V4L2 API for buffer structure and other related data structure information.  

    IOCTLS

    A brief overview of supported ioctl requests appears below. For more detailed information, refer to the V4L2 API document. Note: ioctl information presented in the V4L2 API document may differ slightly from the content of this manpage. In such cases, you should rely on the information in this manpage.

    VIDIOC_QUERYCAP

    Query the device capabilities. Besides device capabilities, the usbvc driver returns structure v4l2_capability which includes information on the driver, data bus and OS kernel. Please note that the "Version" structure member has no meaning in Solaris and is always set to 1.

    VIDIOC_ENUM_FMT

    Enumerate the video formats supported by the device.

    VIDIOC_S_FMT

    Set a video format.

    VIDIOC_G_FMT

    Get a video format.

    VIDIOC_REQBUFS

    Request the usbvc driver to allocate video data buffers. If a buffer is set to zero, the driver stops reading video data from the device and releases all allocated buffers. (For mmap(2) only).

    VIDIOC_QUERYBUF

    Query a given buffer's status. (For mmap(2) only).

    VIDIOC_QBUF

    Enqueue an empty buffer to the video data buffer array. (For mmap(2) only).

    VIDIOC_DQBUF

    Dequeue a done buffer from the video data buffer array. (For mmap(2) only).

    VIDIOC_STREAMON

    Start reading video data.

    VIDIOC_STREAMOFF

    Stop reading video data.

    VIDIOC_ENUMINPUT

    Enumerate all device inputs. Currently, the usbvc driver supports one input only.

    VIDIOC_G_INPUT

    Get the device's current input. At this time, the usbvc driver supports one input only.

    VIDIOC_S_INPUT

    Set the device's current input. At this time, the usbvc driver supports one input only.

    VIDIOC_QUERYCTRL

    Query the device and driver for supported video controls. Currently, the usbvc driver supports the brightness, contrast, saturation, hue, and gamma video controls.

    VIDIOC_G_CTRL

    Get the device's current video control.

    VIDIOC_S_CTRL

    Set the device's current video control.

    VIDIOC_G_PARM

    Get streaming parameters, the number of frames per second and number of buffers used internally by driver in read/write mode.

    VIDIOC_S_PARM

    Set streaming parameters, the number of frames per second and number of buffers used internally by driver in read/write mode.

     

    ERRORS

    EBUSY

    An open was attempted after the device has already been opened.

    EINVAL

    An unsupported ioctl is received or an ioctl is attempted with an out-of-range value.

    EIO

    The driver received an unrecoverable device error or the device did not respond or the device stalled when attempting an access. A read(2) or ioctl(2) did not complete due to a peripheral access.

    ENXIO

    The driver received an open(2) request for a device for which the attach failed.

    ENODEV

    The driver received an open(2) request for a disconnected device.

     

    FILES

    /kernel/drv/usbvc

    32-bit ELF kernel module. (x86)

    /kernel/drv/amd64/usbvc

    64-bit ELF kernel module. (x86)

    /kernel/drv/sparcv9/usbvc

    64-bit ELF kernel module. (SPARC)

    /dev/usb/*/*/*

    ugen(7D) nodes.

    /dev/videoN

    Device node for isochronous input from USB video device and device control.

     

    ATTRIBUTES

    See attributes(5) for descriptions of the following attributes:

    ATTRIBUTE TYPEATTRIBUTE VALUE

    Architecture SPARC, x86, PCI-based systems

    Availability

     

    SEE ALSO

    cfgadm_usb(1M), ioctl(2), open(2), mmap(2), read(2), libusb(3LIB), attributes(5),ugen(7D), usba(7D), attach(9E)

    Writing Device Drivers

    System Administration Guide: Basic Administration

    Universal Serial Bus Specification 1.0, 1.1 and 2.0--- 1996, 1998, 2000

    USB Device Class Definition for Video Devices 1.0 and 1.1--- 2003, 2005

    Video4Linux2 API (V4L2), Version 0.20

    I/O Technologies and Solutions ---http://www.sun.com/io

    http://docs.sun.com

    http://www.usb.org

    http://www.thedirks.org/v4l2  

    DIAGNOSTICS

    In addition to being logged, the following messages may appear on the system console. All messages are formatted in the following manner:

    Warning: <device path> (usbvc<instance num>):Error Message...
    

    Device was disconnected while open. Data may have been lost.

    The device has been hot-removed or powered off while it was open and a possible data transfer was in progress. The job may be aborted.

    Cannot access <device>. Please reconnect.

    This device has been disconnected because a device other than the original one has been inserted. The driver informs you of this fact by displaying the name of the original device.

    Device is not identical to the previous one on this port. Please disconnect and reconnect.

    The device was hot-removed while open. A new device was hot-inserted which is not identical to the original device. Please disconnect the device and reconnect the original device to the same port.

     

    NOTES

    The USB video device will be power-managed when the device is idle.

    If a USB video device is hot-removed while active, a console warning is displayed requesting you to put the device back in the same port and telling you of potential data loss. Hot-removal of an active video device is strongly discouraged.

    Always close all applications before hot-removing or hot-inserting a device. If an application is open when a device is hot-removed, inserting the device in a different port will create new /dev/videoN links. Moving an active device to another port is not recommended.


     

    Index

    NAME
    SYNOPSIS
    DESCRIPTION
    READING DATA
    IOCTLS
    ERRORS
    FILES
    ATTRIBUTES
    SEE ALSO
    DIAGNOSTICS
    NOTES


    Поиск по тексту MAN-ов: 




    Партнёры:
    PostgresPro
    Inferno Solutions
    Hosting by Hoster.ru
    Хостинг:

    Закладки на сайте
    Проследить за страницей
    Created 1996-2024 by Maxim Chirkov
    Добавить, Поддержать, Вебмастеру