The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 ТемаНаборКатегория 
 
 [Cписок руководств | Печать]

sysklogd (8)
  • sysklogd (8) ( Русские man: Команды системного администрирования )
  • >> sysklogd (8) ( Linux man: Команды системного администрирования )
  •  

    NAME

    sysklogd - Linux system logging utilities.
     
    

    SYNOPSIS

    syslogd [ -a socket ] [ -d ] [ -f config file ] [ -h ] [ -l hostlist ] [ -m interval ] [ -n ] [ -p socket ] [ -r ] [ -s domainlist ] [ -v ] [ -x ]

     

    DESCRIPTION

    Sysklogd provides two system utilities which provide support for system logging and kernel message trapping. Support of both internet and unix domain sockets enables this utility package to support both local and remote logging.

    System logging is provided by a version of syslogd(8) derived from the stock BSD sources. Support for kernel logging is provided by the klogd(8) utility which allows kernel logging to be conducted in either a standalone fashion or as a client of syslogd.

    Syslogd provides a kind of logging that many modern programs use. Every logged message contains at least a time and a hostname field, normally a program name field, too, but that depends on how trusty the logging program is.

    While the syslogd sources have been heavily modified a couple of notes are in order. First of all there has been a systematic attempt to insure that syslogd follows its default, standard BSD behavior. The second important concept to note is that this version of syslogd interacts transparently with the version of syslog found in the standard libraries. If a binary linked to the standard shared libraries fails to function correctly we would like an example of the anomalous behavior.

    The main configuration file /etc/syslog.conf or an alternative file, given with the -f option, is read at startup. Any lines that begin with the hash mark (``#'') and empty lines are ignored. If an error occurs during parsing the whole line is ignored.

     

    OPTIONS

    -a socket
    Using this argument you can specify additional sockets from that syslogd has to listen to. This is needed if you're going to let some daemon run within a chroot() environment. You can use up to 19 additional sockets. If your environment needs even more, you have to increase the symbol MAXFUNIX within the syslogd.c source file. An example for a chroot() daemon is described by the people from OpenBSD at http://www.psionic.com/papers/dns.html.
    -d
    Turns on debug mode. Using this the daemon will not proceed a fork(2) to set itself in the background, but opposite to that stay in the foreground and write much debug information on the current tty. See the DEBUGGING section for more information.
    -f config file
    Specify an alternative configuration file instead of /etc/syslog.conf, which is the default.
    -h
    By default syslogd will not forward messages it receives from remote hosts. Specifying this switch on the command line will cause the log daemon to forward any remote messages it receives to forwarding hosts which have been defined.
    -l hostlist
    Specify a hostname that should be logged only with its simple hostname and not the fqdn. Multiple hosts may be specified using the colon (``:'') separator.
    -m interval
    The syslogd logs a mark timestamp regularly. The default interval between two -- MARK -- lines is 20 minutes. This can be changed with this option. Setting the interval to zero turns it off entirely.
    -n
    Avoid auto-backgrounding. This is needed especially if the syslogd is started and controlled by init(8).
    -p socket
    You can specify an alternative unix domain socket instead of /dev/log.
    -r
    This option will enable the facility to receive message from the network using an internet domain socket with the syslog service (see services(5)). The default is to not receive any messages from the network.

    This option is introduced in version 1.3 of the sysklogd package. Please note that the default behavior is the opposite of how older versions behave, so you might have to turn this on.

    -s domainlist
    Specify a domainname that should be stripped off before logging. Multiple domains may be specified using the colon (``:'') separator. Please be advised that no sub-domains may be specified but only entire domains. For example if -s north.de is specified and the host logging resolves to satu.infodrom.north.de no domain would be cut, you will have to specify two domains like: -s north.de:infodrom.north.de.
    -S
    Verbose logging. If specified once, the numeric facility and priority are logged with each locally-written message. If specified more than once, the names of the facility and priority are logged with each locally-written message.
    -v
    Print version and exit.
    -x
    Disable name lookups when receiving remote messages. This avoids deadlocks when the nameserver is running on the same machine that runs the syslog daemon.

     

    SIGNALS

    Syslogd reacts to a set of signals. You may easily send a signal to syslogd using the following:
    kill -SIGNAL `cat /var/run/syslogd.pid`
    

    SIGHUP
    This lets syslogd perform a re-initialization. All open files are closed, the configuration file (default is /etc/syslog.conf) will be reread and the syslog(3) facility is started again.
    SIGTERM
    The syslogd will die.
    SIGINT, SIGQUIT
    If debugging is enabled these are ignored, otherwise syslogd will die.
    SIGUSR1
    Switch debugging on/off. This option can only be used if syslogd is started with the -d debug option.
    SIGCHLD
    Wait for childs if some were born, because of wall'ing messages.

     

    CONFIGURATION FILE SYNTAX DIFFERENCES

    Syslogd uses a slightly different syntax for its configuration file than the original BSD sources. Originally all messages of a specific priority and above were forwarded to the log file.
    For example the following line caused ALL output from daemons using the daemon facilities (debug is the lowest priority, so every higher will also match) to go into /usr/adm/daemons:
            # Sample syslog.conf
            daemon.debug                    /usr/adm/daemons
    

    Under the new scheme this behavior remains the same. The difference is the addition of four new specifiers, the asterisk (*) wildcard, the equation sign (=), the exclamation mark (!), and the minus sign (-).

    The * specifies that all messages for the specified facility are to be directed to the destination. Note that this behavior is degenerate with specifying a priority level of debug. Users have indicated that the asterisk notation is more intuitive.

    The = wildcard is used to restrict logging to the specified priority class. This allows, for example, routing only debug messages to a particular logging source.

    For example the following line in syslog.conf would direct debug messages from all sources to the /usr/adm/debug file.
            # Sample syslog.conf
            *.=debug                        /usr/adm/debug
    

    The ! is used to exclude logging of the specified priorities. This affects all (!) possibilities of specifying priorities.

    For example the following lines would log all messages of the facility mail except those with the priority info to the /usr/adm/mail file. And all messages from news.info (including) to news.crit (excluding) would be logged to the /usr/adm/news file.
            # Sample syslog.conf
            mail.*;mail.!=info              /usr/adm/mail
            news.info;news.!crit    /usr/adm/news
    

    You may use it intuitively as an exception specifier. The above mentioned interpretation is simply inverted. Doing that you may use

            mail.none
    
    or
            mail.!*
    
    or
            mail.!debug
    

    to skip every message that comes with a mail facility. There is much room to play with it. :-)

    The - may only be used to prefix a filename if you want to omit sync'ing the file after every write to it.

    This may take some acclimatization for those individuals used to the pure BSD behavior but testers have indicated that this syntax is somewhat more flexible than the BSD behavior. Note that these changes should not affect standard syslog.conf(5) files. You must specifically modify the configuration files to obtain the enhanced behavior.

     

    SUPPORT FOR REMOTE LOGGING

    These modifications provide network support to the syslogd facility. Network support means that messages can be forwarded from one node running syslogd to another node running syslogd where they will be actually logged to a disk file.

    To enable this you have to specify the -r option on the command line. The default behavior is that syslogd won't listen to the network.

    The strategy is to have syslogd listen on a unix domain socket for locally generated log messages. This behavior will allow syslogd to inter-operate with the syslog found in the standard C library. At the same time syslogd listens on the standard syslog port for messages forwarded from other hosts. To have this work correctly the services(5) files (typically found in /etc) must have the following entry:

            syslog          514/udp
    

    If this entry is missing syslogd neither can receive remote messages nor send them, because the UDP port cant be opened. Instead syslogd will die immediately, blowing out an error message.

    To cause messages to be forwarded to another host replace the normal file line in the syslog.conf file with the name of the host to which the messages is to be sent prepended with an @.

    For example, to forward ALL messages to a remote host use the following syslog.conf entry:
            # Sample syslogd configuration file to
            # messages to a remote host forward all.
            *.*                     @hostname
    

    To forward all kernel messages to a remote host the configuration file would be as follows:

            # Sample configuration file to forward all kernel
            # messages to a remote host.
            kern.*          @hostname
    

    If the remote hostname cannot be resolved at startup, because the name-server might not be accessible (it may be started after syslogd) you don't have to worry. Syslogd will retry to resolve the name ten times and then complain. Another possibility to avoid this is to place the hostname in /etc/hosts.

    With normal syslogds you would get syslog-loops if you send out messages that were received from a remote host to the same host (or more complicated to a third host that sends it back to the first one, and so on). In my domain (Infodrom Oldenburg) we accidently got one and our disks filled up with the same single message. :-(

    To avoid this in further times no messages that were received from a remote host are sent out to another (or the same) remote host anymore. If there are scenarios where this doesn't make sense, please drop me (Joey) a line.

    If the remote host is located in the same domain as the host, syslogd is running on, only the simple hostname will be logged instead of the whole fqdn.

    In a local network you may provide a central log server to have all the important information kept on one machine. If the network consists of different domains you don't have to complain about logging fully qualified names instead of simple hostnames. You may want to use the strip-domain feature -s of this server. You can tell the syslogd to strip off several domains other than the one the server is located in and only log simple hostnames.

    Using the -l option there's also a possibility to define single hosts as local machines. This, too, results in logging only their simple hostnames and not the fqdns.

    The UDP socket used to forward messages to remote hosts or to receive messages from them is only opened when it is needed. In releases prior to 1.3-23 it was opened every time but not opened for reading or forwarding respectively.

     

    OUTPUT TO NAMED PIPES (FIFOs)

    This version of syslogd has support for logging output to named pipes (fifos). A fifo or named pipe can be used as a destination for log messages by prepending a pipy symbol (``|'') to the name of the file. This is handy for debugging. Note that the fifo must be created with the mkfifo command before syslogd is started.
    The following configuration file routes debug messages from the kernel to a fifo:
            # Sample configuration to route kernel debugging
            # messages ONLY to /usr/adm/debug which is a
            # named pipe.
            kern.=debug                     |/usr/adm/debug
    

     

    INSTALLATION CONCERNS

    There is probably one important consideration when installing this version of syslogd. This version of syslogd is dependent on proper formatting of messages by the syslog function. The functioning of the syslog function in the shared libraries changed somewhere in the region of libc.so.4.[2-4].n. The specific change was to null-terminate the message before transmitting it to the /dev/log socket. Proper functioning of this version of syslogd is dependent on null-termination of the message.

    This problem will typically manifest itself if old statically linked binaries are being used on the system. Binaries using old versions of the syslog function will cause empty lines to be logged followed by the message with the first character in the message removed. Relinking these binaries to newer versions of the shared libraries will correct this problem.

    Both the syslogd(8) and the klogd(8) can either be run from init(8) or started as part of the rc.* sequence. If it is started from init the option -n must be set, otherwise you'll get tons of syslog daemons started. This is because init(8) depends on the process ID.

     

    SECURITY THREATS

    There is the potential for the syslogd daemon to be used as a conduit for a denial of service attack. Thanks go to John Morrison (jmorriso@rflab.ee.ubc.ca) for alerting me to this potential. A rogue program(mer) could very easily flood the syslogd daemon with syslog messages resulting in the log files consuming all the remaining space on the filesystem. Activating logging over the inet domain sockets will of course expose a system to risks outside of programs or individuals on the local machine.

    There are a number of methods of protecting a machine:

    1.
    Implement kernel firewalling to limit which hosts or networks have access to the 514/UDP socket.
    2.
    Logging can be directed to an isolated or non-root filesystem which, if filled, will not impair the machine.
    3.
    The ext2 filesystem can be used which can be configured to limit a certain percentage of a filesystem to usage by root only. NOTE that this will require syslogd to be run as a non-root process. ALSO NOTE that this will prevent usage of remote logging since syslogd will be unable to bind to the 514/UDP socket.
    4.
    Disabling inet domain sockets will limit risk to the local machine.
    5.
    Use step 4 and if the problem persists and is not secondary to a rogue program/daemon get a 3.5 ft (approx. 1 meter) length of sucker rod* and have a chat with the user in question.

    Sucker rod def. --- 3/4, 7/8 or 1in. hardened steel rod, male threaded on each end. Primary use in the oil industry in Western North Dakota and other locations to pump 'suck' oil from oil wells. Secondary uses are for the construction of cattle feed lots and for dealing with the occasional recalcitrant or belligerent individual.

     

    DEBUGGING

    When debugging is turned on using -d option then syslogd will be very verbose by writing much of what it does on stdout. Whenever the configuration file is reread and re-parsed you'll see a tabular, corresponding to the internal data structure. This tabular consists of four fields:
    number
    This field contains a serial number starting by zero. This number represents the position in the internal data structure (i.e. the array). If one number is left out then there might be an error in the corresponding line in /etc/syslog.conf.
    pattern
    This field is tricky and represents the internal structure exactly. Every column stands for a facility (refer to syslog(3)). As you can see, there are still some facilities left free for former use, only the left most are used. Every field in a column represents the priorities (refer to syslog(3)).
    action
    This field describes the particular action that takes place whenever a message is received that matches the pattern. Refer to the syslog.conf(5) manpage for all possible actions.
    arguments
    This field shows additional arguments to the actions in the last field. For file-logging this is the filename for the logfile; for user-logging this is a list of users; for remote logging this is the hostname of the machine to log to; for console-logging this is the used console; for tty-logging this is the specified tty; wall has no additional arguments.
     

    FILES

    /etc/syslog.conf
    Configuration file for syslogd. See syslog.conf(5) for exact information.
    /dev/log
    The Unix domain socket to from where local syslog messages are read.
    /var/run/syslogd.pid
    The file containing the process id of syslogd.
     

    BUGS

    If an error occurs in one line the whole rule is ignored.

    Syslogd doesn't change the filemode of opened logfiles at any stage of process. If a file is created it is world readable. If you want to avoid this, you have to create it and change permissions on your own. This could be done in combination with rotating logfiles using the savelog(8) program that is shipped in the smail 3.x distribution. Remember that it might be a security hole if everybody is able to read auth.* messages as these might contain passwords.

     

    SEE ALSO

    syslog.conf(5), klogd(8), logger(1), syslog(2), syslog(3), services(5), savelog(8)

     

    COLLABORATORS

    Syslogd is taken from BSD sources, Greg Wettstein (greg@wind.enjellic.com) performed the port to Linux, Martin Schulze (joey@linux.de) fixed some bugs and added several new features. Klogd was originally written by Steve Lord (lord@cray.com), Greg Wettstein made major improvements.

    Dr. Greg Wettstein
    Enjellic Systems Development
    Oncology Research Division Computing Facility
    Roger Maris Cancer Center
    Fargo, ND
    greg@wind.enjellic.com

    Stephen Tweedie
    Department of Computer Science
    Edinburgh University, Scotland
    sct@dcs.ed.ac.uk

    Juha Virtanen
    jiivee@hut.fi

    Shane Alderton
    shane@ion.apana.org.au

    Martin Schulze
    Infodrom Oldenburg
    joey@linux.de


     

    Index

    NAME
    SYNOPSIS
    DESCRIPTION
    OPTIONS
    SIGNALS
    CONFIGURATION FILE SYNTAX DIFFERENCES
    SUPPORT FOR REMOTE LOGGING
    OUTPUT TO NAMED PIPES (FIFOs)
    INSTALLATION CONCERNS
    SECURITY THREATS
    DEBUGGING
    FILES
    BUGS
    SEE ALSO
    COLLABORATORS


    Поиск по тексту MAN-ов: 




    Партнёры:
    PostgresPro
    Inferno Solutions
    Hosting by Hoster.ru
    Хостинг:

    Закладки на сайте
    Проследить за страницей
    Created 1996-2024 by Maxim Chirkov
    Добавить, Поддержать, Вебмастеру