The OpenNET Project / Index page

[ новости /+++ | форум | wiki | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 ТемаНаборКатегория 
 
 [Cписок руководств | Печать]

prototype (4)
  • >> prototype (4) ( Solaris man: Специальные файлы /dev/* )
  •  

    NAME

    prototype - package information file
     
    

    DESCRIPTION

    prototype is an ASCII file used to specify package information. Each entry in the file describes a single deliverable object. An object can be a data file, directory, source file, executable object, and so forth. This file is generated by the package developer.

    Entries in a prototype file consist of several fields of information separated by white space. Comment lines begin with a ``#'' and are ignored. The fields are described below and must appear in the order shown.

    part

    An optional field designating the part number in which the object resides. A part is a collection of files and is the atomic unit by which a package is processed. A developer can choose criteria for grouping files into a part (for example, based on class). If this field is not used, part 1 is assumed.

    ftype

    A one-character field that indicates the file type. Valid values are:

    b

    block special device

    c

    character special device

    d

    directory

    e

    a file to be edited upon installation or removal (can be shared by several packages)

    f

    a standard executable or data file

    i

    installation script or information file

    l

    linked file

    p

    named pipe

    s

    symbolic link

    v

    volatile file (one whose contents are expected to change, like a log file)

    x

    an exclusive directory accessible only by this package

    class

    The installation class to which the file belongs. This name can be no longer than 64 characters. The field is not specified for installation scripts. (admin and all classes beginning with capital letters are reserved class names.)

    pathname

    The pathname where the file resides on the target machine, for example, /usr/bin/mail or bin/ras/proc. Relative pathnames (those that do not begin with a slash) indicate that the file is relocatable. The form

    path1=path2

    can be used for two purposes: to define a link and to define local pathnames.

    For linked files, path1 indicates the destination of the link and path2 indicates the source file. (This format is mandatory for linked files.)

    For local pathnames, path1 indicates the pathname an object should have on the machine where the entry is to be installed and path2 indicates either a relative or fixed pathname to a file on the host machine which contains the actual contents.

    A pathname can contain a variable specification of the form $variable. If variable begins with a lower case letter, it is a build variable. If variable begins with an upper case letter, it is an install variable. Build variables are bound at build time. If an install variable is known at build time, its definition is inserted into the pkginfo(4) file so that it is available at install time. If an install variable is not known at build time, it is bound at install time.

    major

    The major device number. The field is only specified for block or character special devices.

    minor

    The minor device number. The field is only specified for block or character special devices.

    mode

    The octal mode of the file (for example, 0664). A question mark (?) indicates that the mode is left unchanged, implying that the file already exists on the target machine. This field is not used for linked files or packaging information files.

    The mode can be a variable specification of the form $variable. If variable begins with a lower case letter, it is a build variable. If variable begins with an upper case letter, it is an install variable. Build variables are bound at build time. If an install variable is known at build time, its definition is inserted into the pkginfo(4) file so that it is available at install time. If an install variable is not known at build time, it is bound at install time.

    owner

    The owner of the file (for example, bin or root). The field is limited to 14 characters in length. A question mark (?) indicates that the owner is left unchanged, implying that the file already exists on the target machine. This field is not used for linked files or packaging information files.

    The owner can be a variable specification of the form $variable. If variable begins with a lower case letter, it is a build variable. If variable begins with an upper case letter, it is an install variable. Build variables are bound at build time. If an install variable is known at build time, its definition is inserted into the pkginfo(4) file so that it is available at install time. If an install variable is not known at build time, it is bound at install time.

    group

    The group to which the file belongs (for example, bin or sys). The field is limited to 14 characters in length. A question mark (?) indicates that the group is left unchanged, implying that the file already exists on the target machine. This field is not used for linked files or packaging information files.

    The group can be a variable specification of the form $variable. If variable begins with a lower case letter, it is a build variable. If variable begins with an upper case letter, it is an install variable. Build variables are bound at build time. If an install variable is known at build time, its definition is inserted into the pkginfo(4) file so that it is available at install time. If an install variable is not known at build time, it is bound at install time.

    An exclamation point (!) at the beginning of a line indicates that the line contains a command. These commands are used to incorporate files in other directories, to locate objects on a host machine, and to set permanent defaults. The following commands are available:

    search

    Specifies a list of directories (separated by white space) to search for when looking for file contents on the host machine. The base name of the path field is appended to each directory in the ordered list until the file is located. Searches are not recursive.

    include

    Specifies a pathname which points to another prototype file to include. Note that search requests do not span include files.

    default

    Specifies a list of attributes (mode, owner, and group) to be used by default if attribute information is not provided for prototype entries which require the information. The defaults do not apply to entries in include prototype files.

    param=value

    Places the indicated parameter in the current environment. Spans to subsequent included prototype files.

    The above commands can have variable substitutions embedded within them, as demonstrated in the two example prototype files below.

    Before files are overwritten during installation, they are copied to a temporary pathname. The exception to this rule is files whose mode includes execute permission, unless the file is editable (that is, ftype is e). For files which meet this exception, the existing version is linked to a temporary pathname, and the original file is removed. This allows processes which are executing during installation to be overwritten.  

    EXAMPLES

    Example 1 Example 1:

    !PROJDIR=/usr/proj
    !BIN=$PROJDIR/bin
    !CFG=$PROJDIR/cfg
    !LIB=$PROJDIR/lib
    !HDRS=$PROJDIR/hdrs
    !search /usr/myname/usr/bin /usr/myname/src /usr/myname/hdrs
    i pkginfo=/usr/myname/wrap/pkginfo
    i depend=/usr/myname/wrap/depend
    i version=/usr/myname/wrap/version
    d none /usr/wrap 0755 root bin
    d none /usr/wrap/usr/bin 0755 root bin
    ! search $BIN
    f none /usr/wrap/bin/INSTALL 0755 root bin
    f none /usr/wrap/bin/REMOVE 0755 root bin
    f none /usr/wrap/bin/addpkg 0755 root bin
    !default 755 root bin
    f none /usr/wrap/bin/audit
    f none /usr/wrap/bin/listpkg
    f none /usr/wrap/bin/pkgmk
    # the following file starts out zero length but grows
    v none /usr/wrap/logfile=/dev/null 0644 root bin
    # the following specifies a link (dest=src)
    l none /usr/wrap/src/addpkg=/usr/wrap/bin/rmpkg
    ! search $SRC
    !default 644 root other
    f src /usr/wrap/src/INSTALL.sh
    f src /usr/wrap/src/REMOVE.sh
    f src /usr/wrap/src/addpkg.c
    f src /usr/wrap/src/audit.c
    f src /usr/wrap/src/listpkg.c
    f src /usr/wrap/src/pkgmk.c
    d none /usr/wrap/data 0755 root bin
    d none /usr/wrap/save 0755 root bin
    d none /usr/wrap/spool 0755 root bin
    d none /usr/wrap/tmp 0755 root bin
    d src /usr/wrap/src 0755 root bin
    

    Example 2 Example 2:

    # this prototype is generated by 'pkgproto' to refer
    # to all prototypes in my src directory
    !PROJDIR=/usr/dew/projx
    !include $PROJDIR/src/cmd/prototype
    !include $PROJDIR/src/cmd/audmerg/protofile
    !include $PROJDIR/src/lib/proto
    

     

    SEE ALSO

    pkgmk(1), pkginfo(4)

    Application Packaging Developer's Guide  

    NOTES

    Normally, if a file is defined in the prototype file but does not exist, that file is created at the time of package installation. However, if the file pathname includes a directory that does not exist, the file is not created. For example, if the prototype file has the following entry:

    f none /usr/dev/bin/command
    

    and that file does not exist, it is created if the directory /usr/dev/bin already exists or if the prototype also has an entry defining the directory:

    d none /usr/dev/bin
    


     

    Index

    NAME
    DESCRIPTION
    EXAMPLES
    SEE ALSO
    NOTES


    Поиск по тексту MAN-ов: 




    Партнёры:
    PostgresPro
    Inferno Solutions
    Hosting by Hoster.ru
    Хостинг:

    Закладки на сайте
    Проследить за страницей
    Created 1996-2024 by Maxim Chirkov
    Добавить, Поддержать, Вебмастеру