The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 ТемаНаборКатегория 
 
 [Cписок руководств | Печать]

patch (1)
  • patch (1) ( Solaris man: Команды и прикладные программы пользовательского уровня )
  • patch (1) ( FreeBSD man: Команды и прикладные программы пользовательского уровня )
  • patch (1) ( Linux man: Команды и прикладные программы пользовательского уровня )
  • >> patch (1) ( POSIX man: Команды и прикладные программы пользовательского уровня )
  • Ключ patch обнаружен в базе ключевых слов.
  •  

    NAME

    patch - apply changes to files
     
    

    SYNOPSIS

    patch [-blNR][ -c| -e| -n][-d dir][-D define][-i patchfile]
           [-o outfile][-p num][-r rejectfile][file]  

    DESCRIPTION

    The patch utility shall read a source (patch) file containing any of the three forms of difference (diff) listings produced by the diff utility (normal, context, or in the style of ed) and apply those differences to a file. By default, patch shall read from the standard input.

    The patch utility shall attempt to determine the type of the diff listing, unless overruled by a -c, -e, or -n option.

    If the patch file contains more than one patch, patch shall attempt to apply each of them as if they came from separate patch files. (In this case, the application shall ensure that the name of the patch file is determinable for each diff listing.)  

    OPTIONS

    The patch utility shall conform to the Base Definitions volume of IEEE Std 1003.1-2001, Section 12.2, Utility Syntax Guidelines.

    The following options shall be supported:

    -b
    Save a copy of the original contents of each modified file, before the differences are applied, in a file of the same name with the suffix .orig appended to it. If the file already exists, it shall be overwritten; if multiple patches are applied to the same file, the .orig file shall be written only for the first patch. When the -o outfile option is also specified, file .orig shall not be created but, if outfile already exists, outfile .orig shall be created.
    -c
    Interpret the patch file as a context difference (the output of the utility diff when the -c or -C options are specified).
    -d  dir
    Change the current directory to dir before processing as described in the EXTENDED DESCRIPTION section.
    -D  define
    Mark changes with one of the following C preprocessor constructs:

    
    #ifdef define
    ...
    #endif
    
    
    #ifndef define
    ...
    #endif
    
    

    optionally combined with the C preprocessor construct #else. If the patched file is processed with the C preprocessor, where the macro define is defined, the output shall contain the changes from the patch file; otherwise, the output shall not contain the patches specified in the patch file.

    -e
    Interpret the patch file as an ed script, rather than a diff script.
    -i  patchfile
    Read the patch information from the file named by the pathname patchfile, rather than the standard input.
    -l
    (The letter ell.) Cause any sequence of <blank>s in the difference script to match any sequence of <blank>s in the input file. Other characters shall be matched exactly.
    -n
    Interpret the script as a normal difference.
    -N
    Ignore patches where the differences have already been applied to the file; by default, already-applied patches shall be rejected.
    -o  outfile
    Instead of modifying the files (specified by the file operand or the difference listings) directly, write a copy of the file referenced by each patch, with the appropriate differences applied, to outfile. Multiple patches for a single file shall be applied to the intermediate versions of the file created by any previous patches, and shall result in multiple, concatenated versions of the file being written to outfile.
    -p  num
    For all pathnames in the patch file that indicate the names of files to be patched, delete num pathname components from the beginning of each pathname. If the pathname in the patch file is absolute, any leading slashes shall be considered the first component (that is, -p 1 shall remove the leading slashes). Specifying -p 0 shall cause the full pathname to be used. If -p is not specified, only the basename (the final pathname component) shall be used.
    -R
    Reverse the sense of the patch script; that is, assume that the difference script was created from the new version to the old version. The -R option cannot be used with ed scripts. The patch utility shall attempt to reverse each portion of the script before applying it. Rejected differences shall be saved in swapped format. If this option is not specified, and until a portion of the patch file is successfully applied, patch attempts to apply each portion in its reversed sense as well as in its normal sense. If the attempt is successful, the user shall be prompted to determine whether the -R option should be set.
    -r  rejectfile
    Override the default reject filename. In the default case, the reject file shall have the same name as the output file, with the suffix .rej appended to it; see Patch Application .

     

    OPERANDS

    The following operand shall be supported:

    file
    A pathname of a file to patch.

     

    STDIN

    See the INPUT FILES section.  

    INPUT FILES

    Input files shall be text files.  

    ENVIRONMENT VARIABLES

    The following environment variables shall affect the execution of patch:

    LANG
    Provide a default value for the internationalization variables that are unset or null. (See the Base Definitions volume of IEEE Std 1003.1-2001, Section 8.2, Internationalization Variables for the precedence of internationalization variables used to determine the values of locale categories.)
    LC_ALL
    If set to a non-empty string value, override the values of all the other internationalization variables.
    LC_CTYPE
    Determine the locale for the interpretation of sequences of bytes of text data as characters (for example, single-byte as opposed to multi-byte characters in arguments and input files).
    LC_MESSAGES
    Determine the locale that should be used to affect the format and contents of diagnostic messages written to standard error and informative messages written to standard output.
    NLSPATH
    Determine the location of message catalogs for the processing of LC_MESSAGES .
    LC_TIME
    Determine the locale for recognizing the format of file timestamps written by the diff utility in a context-difference input file.

     

    ASYNCHRONOUS EVENTS

    Default.  

    STDOUT

    Not used.  

    STDERR

    The standard error shall be used for diagnostic and informational messages.  

    OUTPUT FILES

    The output of the patch utility, the save files ( .orig suffixes), and the reject files ( .rej suffixes) shall be text files.  

    EXTENDED DESCRIPTION

    A patch file may contain patching instructions for more than one file; filenames shall be determined as specified in Filename Determination . When the -b option is specified, for each patched file, the original shall be saved in a file of the same name with the suffix .orig appended to it.

    For each patched file, a reject file may also be created as noted in Patch Application . In the absence of a -r option, the name of this file shall be formed by appending the suffix .rej to the original filename.  

    Patch File Format

    The patch file shall contain zero or more lines of header information followed by one or more patches. Each patch shall contain zero or more lines of filename identification in the format produced by diff -c, and one or more sets of diff output, which are customarily called hunks.

    The patch utility shall recognize the following expression in the header information:

    Index:  pathname

    The file to be patched is named pathname.

    If all lines (including headers) within a patch begin with the same leading sequence of <blank>s, the patch utility shall remove this sequence before proceeding. Within each patch, if the type of difference is context, the patch utility shall recognize the following expressions:

    *** filename timestamp

    The patches arose from filename.

    --- filename timestamp

    The patches should be applied to filename.

    Each hunk within a patch shall be the diff output to change a line range within the original file. The line numbers for successive hunks within a patch shall occur in ascending order.  

    Filename Determination

    If no file operand is specified, patch shall perform the following steps to determine the filename to use:

    If the type of diff is context, the patch utility shall delete pathname components (as specified by the -p option) from the filename on the line beginning with "***" , then test for the existence of this file relative to the current directory (or the directory specified with the -d option). If the file exists, the patch utility shall use this filename.

    If the type of diff is context, the patch utility shall delete the pathname components (as specified by the -p option) from the filename on the line beginning with "---" , then test for the existence of this file relative to the current directory (or the directory specified with the -d option). If the file exists, the patch utility shall use this filename.

    If the header information contains a line beginning with the string Index:, the patch utility shall delete pathname components (as specified by the -p option) from this line, then test for the existence of this file relative to the current directory (or the directory specified with the -d option). If the file exists, the patch utility shall use this filename.

    If an SCCS directory exists in the current directory, patch shall attempt to perform a get -e SCCS/s. filename command to retrieve an editable version of the file. If the file exists, the patch utility shall use this filename.

    The patch utility shall write a prompt to standard output and request a filename interactively from the controlling terminal (for example, /dev/tty).  

    Patch Application

    If the -c, -e, or -n option is present, the patch utility shall interpret information within each hunk as a context difference, an ed difference, or a normal difference, respectively. In the absence of any of these options, the patch utility shall determine the type of difference based on the format of information within the hunk.

    For each hunk, the patch utility shall begin to search for the place to apply the patch at the line number at the beginning of the hunk, plus or minus any offset used in applying the previous hunk. If lines matching the hunk context are not found, patch shall scan both forwards and backwards at least 1000 bytes for a set of lines that match the hunk context.

    If no such place is found and it is a context difference, then another scan shall take place, ignoring the first and last line of context. If that fails, the first two and last two lines of context shall be ignored and another scan shall be made. Implementations may search more extensively for installation locations.

    If no location can be found, the patch utility shall append the hunk to the reject file. The rejected hunk shall be written in context-difference format regardless of the format of the patch file. If the input was a normal or ed-style difference, the reject file may contain differences with zero lines of context. The line numbers on the hunks in the reject file may be different from the line numbers in the patch file since they shall reflect the approximate locations for the failed hunks in the new file rather than the old one.

    If the type of patch is an ed diff, the implementation may accomplish the patching by invoking the ed utility.  

    EXIT STATUS

    The following exit values shall be returned:

     0
    Successful completion.
     1
    One or more lines were written to a reject file.
    >1
    An error occurred.

     

    CONSEQUENCES OF ERRORS

    Patches that cannot be correctly placed in the file shall be written to a reject file.

    The following sections are informative.  

    APPLICATION USAGE

    The -R option does not work with ed scripts because there is too little information to reconstruct the reverse operation.

    The -p option makes it possible to customize a patch file to local user directory structures without manually editing the patch file. For example, if the filename in the patch file was:

    
    /curds/whey/src/blurfl/blurfl.c
    
    

    Setting -p 0 gives the entire pathname unmodified; -p 1 gives:

    
    curds/whey/src/blurfl/blurfl.c
    
    

    without the leading slash, -p 4 gives:

    
    blurfl/blurfl.c
    
    

    and not specifying -p at all gives:

    
    blurfl.c .
    
    
     

    EXAMPLES

    None.  

    RATIONALE

    Some of the functionality in historical patch implementations was not specified. The following documents those features present in historical implementations that have not been specified.

    A deleted piece of functionality was the '+' pseudo-option allowing an additional set of options and a patch file operand to be given. This was seen as being insufficiently useful to standardize.

    In historical implementations, if the string "Prereq:" appeared in the header, the patch utility would search for the corresponding version information (the string specified in the header, delimited by <blank>s or the beginning or end of a line or the file) anywhere in the original file. This was deleted as too simplistic and insufficiently trustworthy a mechanism to standardize. For example, if:

    
    Prereq: 1.2
    
    

    were in the header, the presence of a delimited 1.2 anywhere in the file would satisfy the prerequisite.

    The following options were dropped from historical implementations of patch as insufficiently useful to standardize:

    -b
    The -b option historically provided a method for changing the name extension of the backup file from the default .orig. This option has been modified and retained in this volume of IEEE Std 1003.1-2001.
    -F
    The -F option specified the number of lines of a context diff to ignore when searching for a place to install a patch.
    -f
    The -f option historically caused patch not to request additional information from the user.
    -r
    The -r option historically provided a method of overriding the extension of the reject file from the default .rej.
    -s
    The -s option historically caused patch to work silently unless an error occurred.
    -x
    The -x option historically set internal debugging flags.

    In some file system implementations, the saving of a .orig file may produce unwanted results. In the case of 12, 13, or 14-character filenames (on file systems supporting 14-character maximum filenames), the .orig file overwrites the new file. The reject file may also exceed this filename limit. It was suggested, due to some historical practice, that a tilde ( '~' ) suffix be used instead of .orig and some other character instead of the .rej suffix. This was rejected because it is not obvious to the user which file is which. The suffixes .orig and .rej are clearer and more understandable.

    The -b option has the opposite sense in some historical implementations-do not save the .orig file. The default case here is not to save the files, making patch behave more consistently with the other standard utilities.

    The -w option in early proposals was changed to -l to match historical practice.

    The -N option was included because without it, a non-interactive application cannot reject previously applied patches. For example, if a user is piping the output of diff into the patch utility, and the user only wants to patch a file to a newer version non-interactively, the -N option is required.

    Changes to the -l option description were proposed to allow matching across <newline>s in addition to just <blank>s. Since this is not historical practice, and since some ambiguities could result, it is suggested that future developments in this area utilize another option letter, such as -L.  

    FUTURE DIRECTIONS

    None.  

    SEE ALSO

    ed , diff  

    COPYRIGHT

    Portions of this text are reprinted and reproduced in electronic form from IEEE Std 1003.1, 2003 Edition, Standard for Information Technology -- Portable Operating System Interface (POSIX), The Open Group Base Specifications Issue 6, Copyright (C) 2001-2003 by the Institute of Electrical and Electronics Engineers, Inc and The Open Group. In the event of any discrepancy between this version and the original IEEE and The Open Group Standard, the original IEEE and The Open Group Standard is the referee document. The original Standard can be obtained online at http://www.opengroup.org/unix/online.html .


     

    Index

    NAME
    SYNOPSIS
    DESCRIPTION
    OPTIONS
    OPERANDS
    STDIN
    INPUT FILES
    ENVIRONMENT VARIABLES
    ASYNCHRONOUS EVENTS
    STDOUT
    STDERR
    OUTPUT FILES
    EXTENDED DESCRIPTION
    Patch File Format
    Filename Determination
    Patch Application
    EXIT STATUS
    CONSEQUENCES OF ERRORS
    APPLICATION USAGE
    EXAMPLES
    RATIONALE
    FUTURE DIRECTIONS
    SEE ALSO
    COPYRIGHT


    Поиск по тексту MAN-ов: 




    Партнёры:
    PostgresPro
    Inferno Solutions
    Hosting by Hoster.ru
    Хостинг:

    Закладки на сайте
    Проследить за страницей
    Created 1996-2024 by Maxim Chirkov
    Добавить, Поддержать, Вебмастеру