Интерактивная система просмотра системных руководств (man-ов)
>> oki4drv (1) ( Linux man: Команды и прикладные программы пользовательского уровня )
oki4drv - User space based driver for OKIPAGE 4w,
OKIPAGE 4w PLUS and
OKIPAGE 8w Lite printers.
is a user level driver for the
OKIPAGE 4w PLUS
as well as the
OKIPAGE 8w Lite
GDI (Generic Display Interface) printers.
It takes PostScript input from some files specified on the
command line or from standard input and renders them through GhostScript's
The GhostScript output will be coded into a data stream appropriate for
those printers and spooled page by page sendid directly to the printer
device itself. The default printer device file used is:
Due to the printing technology involved the feeding of the printer with
data imposes some real-time constraints on the run of this program. The
document processing must therefore be done on a page by page basis. The
host system should be
equipped to keep up with the printers hunger for data. Supposedly an 486
with about 16M bytes of RAM should do it. But please
try to use this program with one of those printers on an in esp.
386SX/16MHz with 4 megs of RAM! I'm personally using an K6/333MHz with
64M bytes of RAM and can't therefore tell what the real lower limit is.
Failing to meet those constraints may result in severe physical damage
to the printer! Thought it shouldn't, since I have been observing those printers
ability to stop and resume in the middle of processing a sheet of paper.
It appears that this behavior involves some control from the computers side,
so I can't really at this stage of developement reproduce it.
Please make sure that the printer is set to EPP or SPP mode in the BIOS!
ECP will fail for reasons I don't want to explain in length here.
To guarantee a quite continuous data stream, the process of sending the page
image data to the printer is exploring real time and execution priority
manipulation facilities of the underlying operating system. As a
consequence this program must be used in
mode. The second consequence of this is that it doesn't make sense to use this
program in pure filtering mode under the control of some systems printer
spooling daemon like for example:
Sorry but that's just like the live is. However the user's inconvenience
should remain quite moderate.
If you expirence problems try first to output the data into a separate file
and thereafter to cat it to the printer at once like this:
oki4drv foo.ps -o temp; cat temp > /dev/lp0.
And make sure that the machine you are using is otherwise idle.
The options recognized by this program are:
Render in graphics mode instead of text mode, which is the default.
Use the manual paper feed instead of the default automatic.
- -s papersize
Specify the paper size. Possible values are:
The default value is the
- -o /dev/foo
Specify and alternative printer device file name or any file if you wish
to cat the data to the printer after fully finished rendering.
The default value is: /dev/lp0.
- -d darkness
Specify the darkness value in the range from -2 to 2, from dark to light.
0 (medium) is the default value.
- -w weight
Specify the paper weight in the range from -2 to 2, from heavy to light.
0 (heavy) is the default value.
Prints the version information and exit.
Run in verbose mode diving information about running status and currently
processed pages in a format similar to the one used by the TeX tools.
You will need the excellent GhostScript interpreter for the PostScript language
to use this program.
There are currently no known bugs in the driver program itself,
other then of linguistic nature in comments
and documentation. The only bogusity accounts go to OKIDATA - which didn't
documentation about the protocols used by those printers in first place!
However please note that this is
no longer true at all!
They even prvided me for free with a recent model from them!
So all Linux/UNIX enthusiasts out there please note:
OKIDATA is making fine printers for desktop usage, where it's really
fine to use the power of the host CPU for the rendering of the data.
They have IMHO the best price to performace ratio out there one can
With the latest 2.0.3x series of kernels there appear to be
some bogus workarounds for bugs in the interface protocol handling, which
are preventing this driver from working properly. Recent 2.2 (namely
2.2.9 and later) work fine again. I have only tested this driver release
upon 2.2.9 as of now. If the situtation remains that the Linux printer driver
once works and once fails again version by version, I will start to include
a propper working driver in the package too.
Marcin Dalecki <firstname.lastname@example.org
> (- constant contact).